From: Luka Perkov <luka@openwrt.org>
Date: Sat, 15 Feb 2014 22:54:32 +0000 (+0000)
Subject: lantiq: fix PCI problems on ARV4510PW
X-Git-Tag: reboot~7944
X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=commitdiff_plain;h=eddc327c7ca388d953fd74260ac9b429d57d3da8

lantiq: fix PCI problems on ARV4510PW

Some ARV4510PW units seem to have unstable PCI due to missing pull-up
resistors. This patch makes sure that the GPIO lines are driven properly.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 39587
---

diff --git a/target/linux/lantiq/dts/ARV4510PW.dts b/target/linux/lantiq/dts/ARV4510PW.dts
index adba211eac..47724959a1 100644
--- a/target/linux/lantiq/dts/ARV4510PW.dts
+++ b/target/linux/lantiq/dts/ARV4510PW.dts
@@ -56,11 +56,13 @@
 				ebu {
 					lantiq,groups = "ebu a23";
 					lantiq,function = "ebu";
+					lantiq,open-drain = <0>;
 					lantiq,output = <1>;
 				};
 				stp {
 					lantiq,groups = "stp";
 					lantiq,function = "stp";
+					lantiq,open-drain = <0>;
 					lantiq,output = <1>;
 				};
 				exin {
@@ -76,11 +78,13 @@
 				pci_out {
 					lantiq,groups = "gnt1", "gnt2";
 					lantiq,function = "pci";
+					lantiq,open-drain = <0>;
+					lantiq,pull = <0>;
 					lantiq,output = <1>;
 				};
 				pci_rst {
 					lantiq,pins = "io21";
-					lantiq,open-drain;
+					lantiq,open-drain = <0>;
 					lantiq,output = <1>;
 				};
 				buttons {