bcm53xx: use the latest submitted version of ILP clock driver
[openwrt/openwrt.git] / target / linux / bcm53xx / base-files /
2016-08-18 Rafał Miłeckibcm53xx: generate proper network config for Tenda AC9
2016-08-14 Rafał Miłeckibcm53xx: drop target's preinit network support script
2016-07-04 Rafał Miłeckibcm53xx: calculate Seama MD5 using content of kernel...
2016-06-20 Rafał Miłeckibcm53xx: properly support sysupgrade using Seama on...
2016-06-13 Rafał Miłeckibcm53xx: sysupgrade: move TRX specific code to separate...
2016-06-10 Rafał Miłeckibcm53xx: pass datasize to mtd in hexadecimal format
2016-06-10 Rafał Miłeckibcm53xx: fix partition typos in 09_fix_crc
2016-06-10 Rafał Miłeckibcm53xx: calculate TRX CRC32 using whole kernel partition
2016-05-18 Rafał Miłeckibcm53xx: drop Copyright header from two of my bash...
2016-04-09 Rafał Miłeckibcm53xx: add switch config workaround for R8500 and...
2016-04-09 Rafał Miłeckibcm53xx: fix regression in generating network config
2016-04-09 Rafał Miłeckibcm53xx: add basic support for Netgear R7900
2016-02-03 Rafał Miłeckibcm53xx: start working on Netgear R8500
2016-01-30 Rafał Miłeckibcm53xx: support Netgear R8500 in sysupgrade
2016-01-29 Rafał Miłeckibcm53xx: specify magic expected in sysupgrade for D...
2016-01-28 Rafał Miłeckibcm53xx: basic support for Seama format in sysupgrade
2016-01-28 Rafał Miłeckibcm53xx: fix MD5 in Seama format on flash after install...
2016-01-27 Rafał Miłeckibcm53xx: detect Seama sysupgrade format
2015-12-11 Jo-Philipp Wichall: drop old uci-defaults.sh
2015-12-03 Jo-Philipp Wichall: remove dummy ucidef_set_interface_loopback() from...
2015-12-03 Jo-Philipp Wichboard.d: remove redundant ucidef_set_interfaces_lan_wan...
2015-12-03 Jo-Philipp Wichboard.d: merge ucidef_add_switch() and ucidef_add_switc...
2015-12-02 Jo-Philipp Wichbcm53xx: switch to ucidef_add_switch_ports()
2015-10-30 Rafał Miłeckibcm53xx: add workaround for Netgear R8000 network
2015-08-26 Rafał Miłeckibcm53xx: support sysupgrade with Netgear R7000 original...
2015-06-06 Rafał Miłeckibcm53xx: fallback to default_do_upgrade if NAND upgrade...
2015-06-06 Rafał Miłeckibcm53xx: sysupgrade: drop useless shift in platform.sh
2015-06-06 Rafał Miłeckibcm53xx: extract TRX from image on the fly
2015-06-06 Rafał Miłeckibcm53xx: sysupgrade: extract TRX partitions directly...
2015-05-16 Rafał Miłeckibcm53xx: try to fix network on Asus RT-AC87U
2015-05-13 Rafał Miłeckibcm53xx: fix default network interface on Netgear R8000
2015-04-24 Rafał Miłeckibcm53xx: sort ports from NVRAM entries before matching...
2015-04-21 Rafał Miłeckibcm53xx: sysupgrade: check if new kernel fits partition...
2015-04-21 Rafał Miłeckibcm53xx: sysupgrade: improve NAND warnings
2015-04-21 Rafał Miłeckibcm53xx: sysupgrade: drop some debugging message
2015-04-21 Rafał Miłeckibcm53xx: sysupgrade: allow flashing NAND devices withou...
2015-04-21 Rafał Miłeckibcm53xx: sysupgrade: support flashing TRX with UBI...
2015-04-17 Rafał Miłeckibcm53xx: fix handling absolute paths in sysupgrade...
2015-04-16 Felix Fietkaubcm53xx: make use of the new board detection layer
2015-04-14 Rafał Miłeckibcm53xx: add (disabled) support for upgrading kernel...
2015-04-14 Rafał Miłeckiotrx: change command line API to start with a mode
2015-04-12 Rafał Miłeckibcm53xx: try to handle Netgear R8000 VLANs config
2015-04-12 Rafał Miłeckibcm53xx: allow sysupgrade firmwares without UBI contain...
2015-04-12 Rafał Miłeckibcm53xx: add platform_pre_upgrade to prepare for kernel...
2015-04-12 Rafał Miłeckibcm53xx: rework vendor fw handling to don't duplicate...
2015-04-09 Rafał Miłeckibcm53xx: switch to the otrx for verifying TRX images
2015-04-07 Rafał Miłeckibcm53xx: image: share function checking TRX in provided...
2015-04-07 Rafał Miłeckibcm53xx: display all errors (not just the 1st one)...
2015-04-07 Rafał Miłeckibcm53xx: compare provided firmware magic with device...
2014-12-30 Rafał Miłeckibcm53xx: support flashing CHK and CyberTAN images
2014-12-20 Rafał Miłeckibcm53xx: support WAN connected to switch port 0
2014-12-15 Rafał Miłeckibcm53xx: sysupgrade support for devices with serial...
2014-12-15 John Crispinadd "preinit_regular" diag.sh set_state argument
2014-12-11 Rafał Miłeckibcm53xx: failsafe support
2014-09-21 Hauke Mehrtensbcm53xx: add fixtrx
2014-04-23 Hauke Mehrtensbcm53xx: add default config for switch