lantiq: do not "local" variables outside of a function
[openwrt/openwrt.git] / target / linux / lantiq / base-files / etc /
2016-09-23 Martin Blumenstingllantiq: do not "local" variables outside of a function
2016-09-10 Mathias Kresincleanup ucidef_set_interface* usage
2016-09-10 Mathias Kresinlantiq: board.d: apply alphabetical order
2016-09-10 Mathias Kresinlantiq: board.d: cleanup default switch config
2016-08-20 Sigurd Hogsbrolantiq: generate switch configuration for BTHOMEHUBV2B.
2016-08-10 Mathias Kresinlantiq: board.d: set lan mac address only where necessary
2016-07-28 Hauke Mehrtenslantiq: fix switch configuration for EASY80920
2016-07-28 Felix Fietkaulantiq: fix WBMR-300HPD switch port assignment
2016-06-22 Oswald Buddenhagenlantiq: add support for ARV7506PW11 (Alice/O2 IAD 4421)
2016-06-22 John Crispinlantiq: remove gr7000 support
2016-06-20 Mathias Kresinlantiq: diag - switch off the power led on failsafe
2016-06-15 Felix FietkauRevert "lantiq: Use correct macaddr generating logic...
2016-06-14 John Crispinlantiq: add ARV4525PW wifi led
2016-06-14 John Crispinlantiq: fix fritz7320 wifi support
2016-06-13 John Crispinlantiq: Add Support for Fritz!Box 7360 SL
2016-06-13 John Crispinlantiq: add default lan setup to board.d script
2016-06-11 Felix Fietkaulantiq: add Buffalo WBMR-300HPD support
2016-05-27 Daniel Gimpelevichlantiq: Use correct macaddr generating logic for the...
2016-05-27 Mathias Kresinlantiq: VGV7519 - add vlan support
2016-05-27 Mohammed Berdailantiq: fix ARV4518PWR01 network
2016-04-18 John Crispinimage / basefiles: make console password configurable
2016-04-26 John Crispinlantiq: Fix typo in LED diag script.
2016-03-07 Felix Fietkaulantiq: do not set default firmware file
2016-01-18 Hauke Mehrtenslantiq: add support for TP-Link VR200v
2016-01-18 Felix Fietkaulantiq: fix VDSL device detection with Linux 4.4
2016-01-01 John Crispinlantiq: match default xdsl mode and default wan interface
2016-01-01 John Crispinlantiq: use devicename:colour:function led naming scheme
2016-01-01 John Crispinlantiq: add support for indicating the boot state using...
2016-01-01 John Crispinlantiq: use dsl led defined in DTS
2016-01-01 John Crispinlantiq: use power leds defined in DTS
2016-01-01 John Crispinlantiq: use default leds defined in DTS
2016-01-01 John Crispinlantiq: BTHOMEHUBV2B - remove missing usb led workaround
2015-12-17 John Crispinlantiq: Fix LED handling.
2015-12-11 Jo-Philipp Wichall: drop old uci-defaults.sh
2015-12-11 John Crispinlantiq: fix led setup after switch to uci-defaults...
2015-12-06 Jo-Philipp Wichlantiq: fix logic error in dsl board.d code
2015-12-05 Felix Fietkaulantiq: get rid of the dsl_fw mtd partition
2015-12-04 Felix Fietkaulantiq: move esi calls to dsl_cpe_control scripts to...
2015-12-04 Jo-Philipp Wichlantiq: switch from uci-defaults to board.d
2015-10-05 John Crispinlantiq: several ARV7519RW22 fixes
2015-10-05 John Crispinlantiq: Add target TP-Link TD-W8980
2015-07-07 John Crispinlantiq: Add support for Arcadyan ARV8539PW22 (Speedport...
2015-07-07 John Crispinlantiq: Add support for the BT Home Hub 5A
2015-06-05 John Crispinlantiq: Add support for Arcadyan VGV7510KW22 (known...
2015-01-18 John Crispinlantiq: DGN3500 cleanups
2015-01-18 John Crispinlantiq: Fix initscript issue
2015-01-17 John CrispinAdd profile and userspace for P2812HNUF1/3, switch...
2015-01-08 John Crispinlantiq: BT Home Hub 3A - userspace
2015-01-08 John Crispinlantiq: Fix adsl led on Home Hub 2B
2014-11-14 John Crispinlantiq: vgv7519 - set some defaults for leds
2014-11-14 John Crispinlantiq: set default led configuration from /sys entry...
2014-10-29 John Crispinlantiq: vgv7519: fix board_config on dts, read mac...
2014-10-06 John Crispinlantiq - vgv7519: load rt5362 eeprom from bootloader...
2014-09-16 John CrispinLantiq: fix build warning from dsl_fs script
2014-09-15 John Crispinlantiq: add default switch setup to td8970
2014-08-18 John Crispinlantiq: improve ARV7519RW22 support
2014-07-02 John Crispinlantiq: add support for /tmp/sysinfo
2014-05-06 Felix Fietkaulantiq: support loading the dsl firmware from a flash...
2014-04-11 John Crispinlantiq: more vdsl related cleanups
2014-04-10 John Crispinlantiq: move the dsl-modem config to network.@dsl-modem[-1]
2014-04-03 John Crispinlantiq: BT Home Hub 2B support - userspace
2014-03-30 John Crispinlntiq: add support for Astoria ARV7519RW.
2014-03-30 John Crispinlantiq: do an endianness swap to the RT2860 eeprom...
2014-03-30 John Crispinlantiq: add esi
2014-03-30 John Crispinlantiq: fix initial VLAN conf for P2601HNFX
2014-03-30 John Crispinlantiq: add support for Arcadyan ARV7519PW
2014-03-30 John Crispinlantiq: add support for ZyXEL P2812HNUFX
2014-01-15 John Crispinlantiq: Add support for Astoria ARV7510PW22
2014-01-12 John Crispinlantiq: improve Arcadyan ARV4510PW support
2013-11-11 John Crispinlantiq: DGN3500 fixups
2013-11-11 John Crispinlantiq: remove old hotplug handler
2013-11-07 John Crispinlantiq: fix TDW8970 lan/wan mac
2013-11-07 John Crispinlantiq: Fix ar8216 switch configuration for WBMR-HP...
2013-10-08 John Crispinlantiq: fix up diag.sh
2013-09-19 Luka Perkovlantiq: add support for ZyXEL P2601HNFX
2013-09-19 Luka Perkovlantiq: add support for ZTE H201L
2013-08-06 Luka Perkovlantiq: add (incomplete) support for Aztech GR7000
2013-08-05 John Crispinlantiq: several a803 related fixes
2013-08-01 John Crispinlantiq: fix VG3503J ethernet/gphy led support
2013-07-25 John Crispinlantiq: add a hook to make leds work on the secondary...
2013-07-15 Felix Fietkaulantiq: update ralink wlan firmware hotplug script...
2013-06-10 John Crispinlantiq: diag.sh with both red and green power LEDs
2013-05-30 John Crispinlantiq: Fix ar8216 switch configuration
2013-05-30 John Crispinlantiq: DGN3500 support
2013-05-30 John Crispinlantiq: fix LED-handling oversights
2013-04-25 John Crispinlantiq: make leds and network work on VG3503J
2013-04-09 Steven BarthAdapt default network configuration for IPv6
2013-04-03 John CrispinMigrate lantiq platform to common led helper functions
2013-03-12 John Crispinadd support for AudioCodes AC-252
2013-01-18 Jo-Philipp Wichall targets: use numerically prefixed uci-defaults...
2012-12-21 John Crispindefault switch setup for WBMR
2012-12-21 John Crispinadds script to set wps info on boards with a wps button
2012-12-21 John Crispinimprove button handling
2012-12-19 Mirko VogtDo not use deprecated path to functions.sh (/etc/functi...
2012-12-19 John Crispinminor basefiles fixes
2012-12-15 John Crispincleanup basefiles
2012-09-06 Luka Perkovlantiq: fix sx76x default uci network configuration
2012-06-04 Luka Perkovuboot-envtools: update to 2012.04.01
2012-05-29 Gabor Juhoslantiq: use the generic uci-default functions for initi...
2012-04-23 John CrispinAdding wifi eeprom extract for ARV752DPW - Easybox 802
next