lantiq: Add support for the BT Home Hub 5A
[openwrt/openwrt.git] / target / linux / lantiq / base-files /
2015-07-07 John Crispinlantiq: Add support for the BT Home Hub 5A
2015-06-05 John Crispinlantiq: Add support for Arcadyan VGV7510KW22 (known...
2015-02-09 John Crispinlantiq: td-w8970: fix failsafe mode
2015-01-18 John Crispinlantiq: DGN3500 cleanups
2015-01-18 John Crispinlantiq: Fix initscript issue
2015-01-17 John CrispinAdd profile and userspace for P2812HNUF1/3, switch...
2015-01-08 John Crispinlantiq: BT Home Hub 3A - userspace
2015-01-08 John Crispinlantiq: Fix adsl led on Home Hub 2B
2014-11-14 John Crispinlantiq: vgv7519 - set some defaults for leds
2014-11-14 John Crispinlantiq: set default led configuration from /sys entry...
2014-10-29 John Crispinlantiq: vgv7519: fix board_config on dts, read mac...
2014-10-29 John Crispinlantiq_dsl.sh: properly detect vdsl_cpe_control and...
2014-10-06 John Crispinlantiq - vgv7519: load rt5362 eeprom from bootloader...
2014-10-06 John Crispinlantiq: led name has changed from adsl -> dsl
2014-09-16 John CrispinLantiq: fix build warning from dsl_fs script
2014-09-15 John Crispinlantiq: add default switch setup to td8970
2014-08-18 John Crispinlantiq: improve ARV7519RW22 support
2014-07-14 John Crispinlantiq: detect board in preinit state
2014-07-10 John Crispinlantiq: generate /tmp/sysinfo/lantiq_board_name if...
2014-07-10 John Crispinlantiq: enable SysupgradeNAND for BTHOMEHUBV2B
2014-07-02 John Crispinlantiq: add support for /tmp/sysinfo
2014-06-02 John Crispintarget/linux/*/base-files/lib/upgrade/platform.sh ...
2014-05-06 Felix Fietkaulantiq: support loading the dsl firmware from a flash...
2014-04-11 John Crispinlantiq: more vdsl related cleanups
2014-04-10 John Crispinlantiq: move the dsl-modem config to network.@dsl-modem[-1]
2014-04-09 John Crispinlantiq: make dsl_notify.sh executable
2014-04-05 John Crispinlantiq: cleanup the dsl control scripts
2014-04-03 John Crispinlantiq: BT Home Hub 2B support - userspace
2014-03-30 John Crispinlntiq: add support for Astoria ARV7519RW.
2014-03-30 John Crispinlantiq: do an endianness swap to the RT2860 eeprom...
2014-03-30 John Crispinlantiq: add esi
2014-03-30 John Crispinlantiq: fix initial VLAN conf for P2601HNFX
2014-03-30 John Crispinlantiq: add support for Arcadyan ARV7519PW
2014-03-30 John Crispinlantiq: add support for ZyXEL P2812HNUFX
2014-01-15 John Crispinlantiq: Add support for Astoria ARV7510PW22
2014-01-12 John Crispinlantiq: improve Arcadyan ARV4510PW support
2013-11-11 John Crispinlantiq: DGN3500 fixups
2013-11-11 John Crispinlantiq: remove old hotplug handler
2013-11-07 John Crispinlantiq: fix TDW8970 lan/wan mac
2013-11-07 John Crispinlantiq: Fix ar8216 switch configuration for WBMR-HP...
2013-10-08 John Crispinlantiq: fix up diag.sh
2013-09-19 Luka Perkovlantiq: add support for ZyXEL P2601HNFX
2013-09-19 Luka Perkovlantiq: add support for ZTE H201L
2013-09-17 John Crispinlantiq: add v3.10 patches
2013-08-06 John Crispinlantiq: add tplink header id to sysupgrade and fix...
2013-08-06 Luka Perkovlantiq: add (incomplete) support for Aztech GR7000
2013-08-05 John Crispinlantiq: several a803 related fixes
2013-08-01 John Crispinlantiq: fix VG3503J ethernet/gphy led support
2013-07-25 John Crispinlantiq: add a hook to make leds work on the secondary...
2013-07-15 Felix Fietkaulantiq: update ralink wlan firmware hotplug script...
2013-06-10 John Crispinlantiq: diag.sh with both red and green power LEDs
2013-05-30 John Crispinlantiq: Fix ar8216 switch configuration
2013-05-30 John Crispinlantiq: DGN3500 support
2013-05-30 John Crispinlantiq: fix LED-handling oversights
2013-04-25 John Crispinlantiq: make leds and network work on VG3503J
2013-04-25 John Crispinlantiq: fix board detection helpers
2013-04-09 Steven BarthAdapt default network configuration for IPv6
2013-04-03 John CrispinMigrate lantiq platform to common led helper functions
2013-03-12 John Crispinadd support for AudioCodes AC-252
2013-01-18 Jo-Philipp Wichall targets: use numerically prefixed uci-defaults...
2012-12-21 John Crispindefault switch setup for WBMR
2012-12-21 John Crispinadds script to set wps info on boards with a wps button
2012-12-21 John Crispinimprove button handling
2012-12-19 Mirko VogtDo not use deprecated path to functions.sh (/etc/functi...
2012-12-19 John Crispinminor basefiles fixes
2012-12-15 John Crispincleanup basefiles
2012-09-06 Luka Perkovlantiq: fix sx76x default uci network configuration
2012-06-04 Luka Perkovuboot-envtools: update to 2012.04.01
2012-05-29 Gabor Juhoslantiq: use the generic uci-default functions for initi...
2012-05-27 John Crispindgn3500 support with eeprom loading from sysfs
2012-04-23 John CrispinAdding wifi eeprom extract for ARV752DPW - Easybox 802
2012-04-21 Mirko Vogtchange /etc/config/network according to actual VLAN...
2012-03-25 John Crispinupdate /etc/uci-defaults/*
2012-02-14 John Crispingenerate uboot environment data in target
2012-02-14 John Crispinadd annex selection support to ltq_dsl package
2012-01-17 John Crispingigaset 76x
2011-11-22 John Crispinlantiq: * fixes ath5k eeprom handling * fixes sx76x...
2011-11-15 John Crispinlantiq: add runtime generation of /etc/config/network
2011-11-12 John Crispinlantiq: add uci-defaults code for handling leds
2011-11-12 John Crispinlantiq: add /lib/lantiq.sh and make hotplug handlers...
2011-11-12 John Crispinlantiq: adds hotplug handler for loading rt2x00 firmware
2011-11-12 John Crispinlantiq: adds hotplug handler for handling buttons and...
2011-05-29 John Crispin* backport 2.6.8 patches to .39 / .32.33
2010-12-12 John Crispinadds new lantiq kernel. once the codebase is fully...