ar71xx: refresh kernel config
[openwrt/openwrt.git] / target / linux / lantiq /
2015-07-12 Hauke Mehrtenskernel: refresh patches on linux 3.18
2015-07-07 John Crispinlantiq: Add support for Arcadyan ARV8539PW22 (Speedport...
2015-07-07 John Crispinlantiq: Add support for the BT Home Hub 5A
2015-07-07 John Crispinlantiq: Silence the printk when a PCIe error interrupt...
2015-07-07 John Crispinlantiq: Make the MEI address available for kernel drivers
2015-07-07 John Crispinlantiq: Change the data-type of mac address in ETOP...
2015-07-07 John Crispinlantiq: Add support for linux 4.1
2015-06-30 Jonas Gorskikernel: update 3.18 to 3.18.17
2015-06-17 Jonas Gorskikernel: update 3.18 to 3.18.16
2015-06-05 John Crispinlantiq: Backport gpio-stp-xway to fix the highest bits...
2015-06-05 John Crispinlantiq: Add support for Arcadyan VGV7510KW22 (known...
2015-06-03 John Crispinlantiq: Make the CRC32 poly value configurable per...
2015-06-01 Jonas Gorskilantiq: fix VG3503J rootfs offset
2015-05-30 John Crispinlantiq: fix imagebuilder
2015-05-23 John Crispinlantiq: Fix initialization of the PCI IRQs when PCIe...
2015-05-23 John Crispinlantiq: Fix PCIe bus when PCI is also enabled.
2015-05-21 Jonas Gorskikernel: update 3.18 to 3.18.14
2015-05-03 Imre KalozThe ability to read MAC addresses from MTD is useful...
2015-03-27 John Crispinlantiq: remove arphaned folder
2015-03-17 John Crispinlantiq/xrx200: cleanup default packages
2015-03-17 John Crispinlantiq: make xrx200 targets use the upstream dwc2 driver
2015-03-16 John Crispinlantiq: drop 3.14 support
2015-03-15 Felix Fietkaulantiq: add a better fix to strip FCS from ethernet...
2015-03-15 Felix Fietkaulantiq: enable atm-esi by default for xrx200
2015-03-11 John Crispinkenrel: refresh patches
2015-03-11 John Crispinlantiq: make the new dwc2 support only work for vr9
2015-03-11 John Crispinlantiq: Convert Zyxel P-2812HNU-FX and TP-Link TD-W8970...
2015-03-11 John Crispinlantiq: Use platform endianness when accessing dwc2...
2015-03-11 John Crispinlantiq: Add sensible hw-defaults for dwc2
2015-03-11 John Crispinlantiq: Configure gpio power output pin when initializi...
2015-03-11 John Crispinlantiq: Add usb initialization bits from ltq-hcd to...
2015-03-06 John Crispinkernel: move KERNFS to generic config
2015-03-06 John Crispinkernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
2015-03-06 John Crispinkernel: move MTD_SPLIT_SUPPORT to generic config
2015-03-06 John Crispinkernel: remove GENERIC_NET_UTILS from platform configs
2015-03-01 Jonas Gorskikernel: move CONFIG_MIPS_O32_FP64_SUPPORT to generic...
2015-02-14 John Crispinlantiq: disable buffered writes on Intel command set...
2015-02-14 John Crispinlantiq: Fix flash for targets with NO_XIP
2015-02-13 John Crispinlantiq: fix DGN3500 root device
2015-02-12 John Crispinlantiq: make m25p80 work again
2015-02-12 John Crispinlantiq: fix mac addr assignment inside lantiq_etop
2015-02-12 John Crispinlantiq: PCI should be enabled on vrx200
2015-02-11 John Crispinlantiq: fix VG3503J partition table for newer kernels
2015-02-09 John Crispinlantiq: td-w8970: fix failsafe mode
2015-02-09 John Crispinlantiq: td-w8970: fix reset button
2015-02-09 John Crispinlantiq: add 3.18 support
2015-02-08 Luka Perkovlantiq: fix patches after 3.14.32 bump
2015-01-23 John Crispinlantiq: correct value for fpi clock on ar9
2015-01-18 John Crispinlantiq: DGN3500 cleanups
2015-01-18 John Crispinlantiq: Restore call to orphaned etop function
2015-01-18 John Crispinlantiq: Fix initscript issue
2015-01-17 John CrispinRemove old P2812HNUFX dts
2015-01-17 John CrispinAdd profile and userspace for P2812HNUF1/3, switch...
2015-01-17 John Crispinlantiq: Add device tree for P2812HNUF1 and P2812HNUF3
2015-01-08 John Crispinlantiq: BT Home Hub 3A - userspace
2015-01-08 John Crispinlantiq: BT Home Hub 3A - profile
2015-01-08 John Crispinlantiq: BT Home Hub3A - device tree
2015-01-08 John Crispinlantiq: Fix adsl led on Home Hub 2B
2015-01-05 Felix Fietkaulantiq: add missing NAND_WRITE_DATA in NAND driver.
2014-12-13 Felix Fietkaulantiq: remove linux 3.10 support
2014-12-08 Felix Fietkaukernel: refresh patches
2014-11-14 John Crispinlantiq: Concatenate multiple flash chips for lantiq...
2014-11-14 John Crispinlantiq: vgv7519 - set some defaults for leds
2014-11-14 John Crispinlantiq: set default led configuration from /sys entry...
2014-10-30 John Crispinvgv7519: fix profile, this board have a rt2800-pci...
2014-10-29 John Crispinlantiq: vgv7519: fix board_config on dts, read mac...
2014-10-29 John Crispinlantiq_dsl.sh: properly detect vdsl_cpe_control and...
2014-10-26 John Crispinvgv7519: support more recent board release with vrx288...
2014-10-24 Felix Fietkaukernel: makefiles: make use of new var KERNEL_PATCHVER
2014-10-14 John Crispinlantiq xway: generate ramdisk image by default
2014-10-14 John Crispinlantiq: allow pcie to be disabled by dts + vgv7519...
2014-10-06 John Crispinlantiq - vgv7519: load rt5362 eeprom from bootloader...
2014-10-06 John Crispinlantiq - vgv7519: enable pci bus
2014-10-06 John Crispinlantiq - vgv7519: remove spi_cs4, since the board use...
2014-10-06 John Crispinlantiq - vgv7519: fix open-drain configuration for stp
2014-10-06 John Crispinlantiq - vgv7519: add pci-rst entry into dts
2014-10-06 John Crispinlantiq - vgv7519: remove exin definition copied from...
2014-10-06 John Crispinlantiq - vgv7519: we don't have pcie bus so we don...
2014-10-06 John Crispinlantiq - vgv7519: we don't have dual minipci-card so...
2014-10-06 John Crispinlantiq - vgv7519: fix gphy led configuration (this...
2014-10-06 John Crispinlantiq: fix some alt function on pinctrl-xway
2014-10-06 John Crispinlantiq: led name has changed from adsl -> dsl
2014-09-19 John Crispinlantiq: set 3.14 as default
2014-09-16 John CrispinLantiq: fix build warning from dsl_fs script
2014-09-16 John Crispinlantiq: move the lantiq,switch property into the interf...
2014-09-15 John Crispinlantiq: fix switch init on vr9 SoC (3.10)
2014-09-15 John Crispinlantiq: fix switch init on vr9 SoC
2014-09-15 John Crispinlantiq: add default switch setup to td8970
2014-09-11 John Crispinlantiq: update 3.14 patches
2014-09-08 John Crispinlantiq: add ath9k led pin support
2014-08-30 John Crispintarget: set myself as maintainer
2014-08-28 John Crispinlantiq: BTHOMEHUBV2B use bigger mtd partition for kernel
2014-08-18 John Crispinlantiq: update to 3.14
2014-08-18 John Crispinlantiq: generate unique ARV7519RW22 firmware
2014-08-18 John Crispinlantiq: add support for xrx200 firmware depending on...
2014-08-18 John Crispinlantiq: export soc type
2014-08-18 John Crispinlantiq: improve ARV7519RW22 support
2014-07-28 John Crispinlantiq: fix dgn3500 and td8970 wifi
2014-07-28 John Crispinlantiq: fix dgn3500 ethernet
2014-07-20 John Crispinkernel: update to 3.10.49 Signed-off-by: John Crispin...
next