board.d: merge ucidef_add_switch() and ucidef_add_switch_ports()
[openwrt/openwrt.git] / target / linux / lantiq /
2015-12-02 Felix Fietkaulantiq: fix up m25p80 device ids (#20975)
2015-11-24 Hauke Mehrtenslantiq: fix compile error
2015-11-24 Felix Fietkaukernel: update m25p80 in 4.1 to the latest version...
2015-11-21 John Crispinlantiq: add phy led config support over devicetree...
2015-11-21 John Crispinlantiq: tweak DWC2 default parameters
2015-10-25 Hauke Mehrtenslantiq: add clk_round_rate()
2015-10-25 Hauke Mehrtenskernel: update kernel 4.1 to version 4.1.11
2015-10-19 John Crispinlantiq: Synchronize access to the DSL command pipe
2015-10-19 John Crispinlantiq: Print the status register whenever an error...
2015-10-19 John Crispinlantiq: Fixed reading the number of RX FIFOs in the...
2015-10-19 John CrispinRevert "lantiq: activate spi-xway on TDW89X0"
2015-10-11 John Crispinlantiq: fix use of IRQF_DISABLED in lantiq kmods
2015-10-11 John Crispinlantiq: bugfix wrong non pre-emptive crc errors output
2015-10-07 John Crispinlantiq: activate spi-xway on TDW89X0
2015-10-07 John Crispinlantiq: spi driver fix
2015-10-07 John Crispinlantiq: bugfix luci lantiq_dsl status
2015-10-05 John Crispinlantiq: several ARV7519RW22 fixes
2015-10-05 John Crispinlantiq: make v4.1 the default kernel
2015-10-05 John Crispinlantiq: Add target TP-Link TD-W8980
2015-10-05 John Crispinlantiq: fix ath_pci_fixup hang on bridged devices
2015-10-05 John Crispinlantiq: Change the data-type of mac address in ETOP...
2015-10-05 John Crispinlantiq: bugfix uninitialized variables
2015-10-04 Matteo Crocelantiq: fix binutils 2.15.1 build
2015-10-04 Hauke Mehrtenskernel: update 4.1 to 4.1.10
2015-09-15 Rafał Miłeckilantiq: update list on NAND devices in platform_pre_upgrade
2015-09-15 John Crispinlantiq: add platform_pre_upgrade for sysupgrade
2015-09-14 John Crispinlantiq: get more status information from xDSL
2015-09-14 John Crispinlantiq: Add AR9 compatibility bits to DWC2 driver
2015-09-14 John Crispinlantiq: Introduce DWC2 compatible DTS definitions for...
2015-09-14 John Crispinlantiq: Initialize USB on AR9 platform
2015-09-11 Hauke Mehrtenskernel: add CONFIG_MIPS_CDMM config option
2015-09-11 Felix Fietkaulantiq: Use the BAR0 base address in the ath PCI fixup...
2015-09-02 Jonas Gorskikernel: update 3.18 to 3.18.21
2015-08-30 Jonas Gorskilantiq: remove dead EASY33016 image recipe
2015-08-23 Jonas Gorskikernel: update 4.1 to 4.1.6
2015-08-17 John Crispinlantiq: Support newer versions of the PEF7071 ethernet...
2015-08-14 Jonas Gorskiimage.mk: move KDIR_TMP definition to a central location
2015-08-05 Jonas Gorskiimage: fix jffs2(_nand) image generation
2015-08-05 Jonas Gorskikernel: update 4.1 to 4.1.4
2015-07-24 John Crispinlantiq: Silence the PCIe error interrupt printk also...
2015-07-22 Jonas Gorskikernel: refresh patches for 4.1
2015-07-12 Hauke Mehrtenskernel: refresh patches on linux 3.18
2015-07-07 John Crispinlantiq: Add support for Arcadyan ARV8539PW22 (Speedport...
2015-07-07 John Crispinlantiq: Add support for the BT Home Hub 5A
2015-07-07 John Crispinlantiq: Silence the printk when a PCIe error interrupt...
2015-07-07 John Crispinlantiq: Make the MEI address available for kernel drivers
2015-07-07 John Crispinlantiq: Change the data-type of mac address in ETOP...
2015-07-07 John Crispinlantiq: Add support for linux 4.1
2015-06-30 Jonas Gorskikernel: update 3.18 to 3.18.17
2015-06-17 Jonas Gorskikernel: update 3.18 to 3.18.16
2015-06-05 John Crispinlantiq: Backport gpio-stp-xway to fix the highest bits...
2015-06-05 John Crispinlantiq: Add support for Arcadyan VGV7510KW22 (known...
2015-06-03 John Crispinlantiq: Make the CRC32 poly value configurable per...
2015-06-01 Jonas Gorskilantiq: fix VG3503J rootfs offset
2015-05-30 John Crispinlantiq: fix imagebuilder
2015-05-23 John Crispinlantiq: Fix initialization of the PCI IRQs when PCIe...
2015-05-23 John Crispinlantiq: Fix PCIe bus when PCI is also enabled.
2015-05-21 Jonas Gorskikernel: update 3.18 to 3.18.14
2015-05-03 Imre KalozThe ability to read MAC addresses from MTD is useful...
2015-03-27 John Crispinlantiq: remove arphaned folder
2015-03-17 John Crispinlantiq/xrx200: cleanup default packages
2015-03-17 John Crispinlantiq: make xrx200 targets use the upstream dwc2 driver
2015-03-16 John Crispinlantiq: drop 3.14 support
2015-03-15 Felix Fietkaulantiq: add a better fix to strip FCS from ethernet...
2015-03-15 Felix Fietkaulantiq: enable atm-esi by default for xrx200
2015-03-11 John Crispinkenrel: refresh patches
2015-03-11 John Crispinlantiq: make the new dwc2 support only work for vr9
2015-03-11 John Crispinlantiq: Convert Zyxel P-2812HNU-FX and TP-Link TD-W8970...
2015-03-11 John Crispinlantiq: Use platform endianness when accessing dwc2...
2015-03-11 John Crispinlantiq: Add sensible hw-defaults for dwc2
2015-03-11 John Crispinlantiq: Configure gpio power output pin when initializi...
2015-03-11 John Crispinlantiq: Add usb initialization bits from ltq-hcd to...
2015-03-06 John Crispinkernel: move KERNFS to generic config
2015-03-06 John Crispinkernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
2015-03-06 John Crispinkernel: move MTD_SPLIT_SUPPORT to generic config
2015-03-06 John Crispinkernel: remove GENERIC_NET_UTILS from platform configs
2015-03-01 Jonas Gorskikernel: move CONFIG_MIPS_O32_FP64_SUPPORT to generic...
2015-02-14 John Crispinlantiq: disable buffered writes on Intel command set...
2015-02-14 John Crispinlantiq: Fix flash for targets with NO_XIP
2015-02-13 John Crispinlantiq: fix DGN3500 root device
2015-02-12 John Crispinlantiq: make m25p80 work again
2015-02-12 John Crispinlantiq: fix mac addr assignment inside lantiq_etop
2015-02-12 John Crispinlantiq: PCI should be enabled on vrx200
2015-02-11 John Crispinlantiq: fix VG3503J partition table for newer kernels
2015-02-09 John Crispinlantiq: td-w8970: fix failsafe mode
2015-02-09 John Crispinlantiq: td-w8970: fix reset button
2015-02-09 John Crispinlantiq: add 3.18 support
2015-02-08 Luka Perkovlantiq: fix patches after 3.14.32 bump
2015-01-23 John Crispinlantiq: correct value for fpi clock on ar9
2015-01-18 John Crispinlantiq: DGN3500 cleanups
2015-01-18 John Crispinlantiq: Restore call to orphaned etop function
2015-01-18 John Crispinlantiq: Fix initscript issue
2015-01-17 John CrispinRemove old P2812HNUFX dts
2015-01-17 John CrispinAdd profile and userspace for P2812HNUF1/3, switch...
2015-01-17 John Crispinlantiq: Add device tree for P2812HNUF1 and P2812HNUF3
2015-01-08 John Crispinlantiq: BT Home Hub 3A - userspace
2015-01-08 John Crispinlantiq: BT Home Hub 3A - profile
2015-01-08 John Crispinlantiq: BT Home Hub3A - device tree
2015-01-08 John Crispinlantiq: Fix adsl led on Home Hub 2B
2015-01-05 Felix Fietkaulantiq: add missing NAND_WRITE_DATA in NAND driver.
next