lantiq/basefiles: use shutdown instead of stop when the system goes down
[openwrt/openwrt.git] / target /
2018-11-25 Martin Schillerlantiq/basefiles: use shutdown instead of stop when...
2018-11-25 Petr Štetiarimx6: image: ventana: Add missing BOOT_SCRIPT variable
2018-11-25 Daniel Golleramips: select kmod-mt76x0e for TP-Link ArcherC20i...
2018-11-25 Daniel Gollekernel: enable CONFIG_BRIDGE_VLAN_FILTERING
2018-11-24 Rafał Miłeckiath79: specify "firmware" partition format for Ubiquiti...
2018-11-24 Hannu Nymanath79: specify "firmware" partition format for WNDR3700...
2018-11-24 Rafał Miłeckiath79: specify "firmware" partition format for TP-LINK...
2018-11-24 Rafał Miłeckikernel: drop unused arch_split_mtd_part()
2018-11-24 Rafał Miłeckikernel: add missing version.h include to the TP-LINK...
2018-11-24 Rafał Miłeckikernel: add DT binding support to the TP-LINK parser
2018-11-24 Rafał Miłeckiath79: specify "firmware" partition format for Netgear...
2018-11-24 Rafał Miłeckikernel: add DT binding support to the uimage parsers
2018-11-24 Rafał Miłeckikernel: don't auto-split "firmware" if it has "compatib...
2018-11-23 David Bauerkernel: b53: register switch on probe
2018-11-22 Koen Vandeputtekernel: bump 3.18 to 3.18.126
2018-11-22 Koen Vandeputtekernel: bump 4.14 to 4.14.82
2018-11-22 Koen Vandeputtekernel: bump 4.9 to 4.9.138
2018-11-22 Rafał Miłeckibcm53xx: request Seama parser on DIR-885L directly
2018-11-22 Rafał Miłeckikernel: add DT binding support to the Seama parser
2018-11-20 Rafał Miłeckikernel: move diff adding run_parsers_by_type() between...
2018-11-20 Rafał Miłeckikernel: don't export parse_mtd_partitions_by_type(...
2018-11-19 Rafał Miłeckikernel: drop mtd_pad_erasesize() helper from 4.9 and...
2018-11-17 Rinki Kumariar71xx: fix TP-Link Archer C7 v5 switch LEDs
2018-11-15 Pau Escrichar71xx: add support for Gainstrong MiniBox V3.2
2018-11-15 Rafał Miłeckikernel: fix ubifs loosing O_TMPFILE data after power cut
2018-11-14 Koen Vandeputtekernel: bump 4.14 to 4.14.81
2018-11-14 Koen Vandeputtekernel: bump 4.9 to 4.9.137
2018-11-14 Koen Vandeputtekernel: bump 3.18 to 3.18.125
2018-11-12 Stijn Tintelkernel: bump 4.14 to 4.14.80
2018-11-09 Rafał Miłeckibcm53xx: add DT patch describing pins mux controller
2018-11-09 Rafał Miłeckikernel: deprecate support for the generic "linux,part...
2018-11-09 Rafał Miłeckiramips: use separated mtd patch reverting write_page...
2018-11-09 Rafał Miłeckibcm53xx: update pinctrl driver
2018-11-08 Daniel Golleoxnas: remove superseded sysupgrade image check
2018-11-08 Daniel Golleoxnas: kd20: correct memory size to 256MB
2018-11-08 Koen Vandeputteramips: fix netgear r6120 factory image generation
2018-11-06 Felix Fietkauramips: add missing DTS frequency limit for the 5 GHz...
2018-11-06 Koen Vandeputteimx6: fix DMA transaction errors
2018-11-05 Koen Vandeputtear71xx: disable some tiny targets with kernel 4.14
2018-11-05 Koen Vandeputtekernel: bump 4.14 to 4.14.79
2018-11-05 David Baueripq40xx: fix NBG6617 LED mapping
2018-11-04 Daniel Golleoxnas: add console=ttyS0,115200 argument to bootargs
2018-11-04 Daniel Golleoxnas: enable image metadata by setting SUPPORTED_DEVICES
2018-11-04 Daniel Golleoxnas: remove stray kernel config symbols
2018-11-04 Daniel Golleoxnas: switch to generic board detect
2018-11-02 Martin Weineltramips: fix leds on GL.iNet GL-MT300N-V2
2018-11-01 Christian Lamparteripq-wifi: drop custom board-2.bins
2018-11-01 Christian Lamparteripq40xx: nbg6617: switch to upstream boardfile variant
2018-11-01 Christian Lamparteripq40xx: rt-ac58u: replace ubi auto load hack
2018-10-29 Koen Vandeputtear71xx: expand kernel size for ubnt targets
2018-10-29 Koen Vandeputtear71xx: disable ap91-5g due to kernel size
2018-10-29 Koen Vandeputtear71xx: switch more targets to dynamic partitioning
2018-10-29 Radek Dostálar71xx: switch TP-Link RE450 v1 to dynamic partitioning
2018-10-29 David Bauerar71xx: move OCEDO Koala to generic and use dynamic...
2018-10-28 Mathias Kresinath79: fix PQI Air Pen support
2018-10-28 YuheiOKAWAath79: add support for PQI Air Pen
2018-10-28 Roger Pueyo Centellesath79: Add support for Ubiquiti LiteAP ac (LAP-120)
2018-10-23 Koen Vandeputtekernel: add missing symbol for target bcm53xx
2018-10-23 Rafał Miłeckibcm53xx: use upstream SPI controller fix
2018-10-22 Koen Vandeputtekernel: bump 4.14 to 4.14.78
2018-10-22 Koen Vandeputtekernel: bump 4.9 to 4.9.135
2018-10-20 Ryan Mouncempc85xx: workaround 4.14 cross compile issue
2018-10-20 Christian Lamparterapm821xx: add disk-activity triggers via DT.
2018-10-20 Christian Lamparterapm821xx: apm82181.dtsi overhaul
2018-10-20 Christian Lamparterapm821xx: force WNDR4700 console to 115200n8
2018-10-20 Christian Lamparterapm821xx: set uart compatible to ns16750
2018-10-20 Linus Walleijgemini: Fix up image generation
2018-10-20 Linus Walleijgemini: Break out USB to packages
2018-10-20 Baptiste Jonglezkernel: Add support for Winbond w25q128jv SPI NOR flash
2018-10-19 Koen Vandeputtekernel: bump 4.14 to 4.14.77
2018-10-19 Koen Vandeputtekernel: bump 4.9 to 4.9.134
2018-10-17 Fabio Bettoniar71xx/ath79: fix mtd corruption
2018-10-17 Koen Vandeputtear71xx: Move some targets to tiny
2018-10-16 Mathias Kresintreewide: use wpad-basic for not small flash targets
2018-10-16 Koen Vandeputtekernel: bump 4.14 to 4.14.76
2018-10-16 Koen Vandeputtekernel: bump 4.9 to 4.9.133
2018-10-16 Koen Vandeputtekernel: bump 3.18 to 3.18.124
2018-10-15 Felix Fietkauramips: refresh mt7621 kernel config
2018-10-15 Felix Fietkaukernel: add CONFIG_CC_OPTIMIZE_FOR_* to the default...
2018-10-11 Rafał Miłeckibcm53xx: add pending pinctrl driver
2018-10-11 Rafał Miłeckibcm53xx: replace SPI revert with a fix sent upstream
2018-10-11 Magnus Krokenmpc85xx: remove kernel 4.9 support
2018-10-11 Magnus Krokenmpc85xx: switch to kernel 4.14
2018-10-11 Magnus Krokenmpc85xx: add kernel 4.14 support
2018-10-10 Koen Vandeputtear71xx: remove linux 4.9 support
2018-10-10 Koen Vandeputtear71xx: switch to kernel 4.14
2018-10-10 Koen Vandeputtekernel: bump 4.14 to 4.14.75
2018-10-10 Koen Vandeputtekernel: bump 4.9 to 4.9.132
2018-10-09 Felix Fietkaukernel: enable memory compaction
2018-10-09 Felix Fietkaukernel: support gcc-optimized inlining on all architectures
2018-10-08 Stijn TintelRevert "kernel: add a RPS balancer"
2018-10-07 Julian Hauptsunxi: add support for Orange Pi Zero
2018-10-07 David Bauerath79: add Fritz!Box 4020 switchconfig
2018-10-07 David Bauerath79: add support for TP-Link TL-WA901ND v2
2018-10-07 INAGAKI Hiroshiath79: add support for Buffalo WZR-HP-G302H A1A0
2018-10-07 INAGAKI Hiroshiath79: add hwver parameter to buffalo-tag
2018-10-07 Robert Markoath79: Add support for TP-Link TL-WR842N-v2
2018-10-07 Sven Eckelmannipq40xx: Create /var/lock directory in platform_do_upgr...
2018-10-07 Sven Eckelmannar71xx: Create /var/lock directory in platform_do_upgrade_*
2018-10-07 Sven Eckelmannar71xx: Use sysupgrade's RAMFS_COPY_* for fw_(set|print)env
next