openwrt/openwrt.git
3 months agoFix handling of BUILD_SUFFIX in remote-gdb script
Thomas Langer [Thu, 22 Aug 2019 12:21:14 +0000 (12:21 +0000)]
Fix handling of BUILD_SUFFIX in remote-gdb script

When CONFIG_BUILD_SUFFIX is enabled, the target-* folders in build_dir
and staging_dir have this suffix in the name, but not the
toolchain directories. When detecting the names for "arch" and "libc",
also accept the suffix and do not use it for the toolchain path.

Signed-off-by: Thomas Langer <thomas.langer@intel.com>
3 months agotools/cmake: Update to 3.15.1
Daniel Engberg [Sat, 16 Mar 2019 21:09:22 +0000 (21:09 +0000)]
tools/cmake: Update to 3.15.1

Update CMake to 3.15.1
Refresh patches
Remove inofficial fossies.org and replace with GitHub (link on official site)
Remove 150-C-feature-checks-Match-warnings-more-strictly.patch as it's
a no longer needed backport from upstream.
Disable ccache if GCC is 4.8, 4.9 or 5.X to avoid build failures.
Reference: https://github.com/openwrt/openwrt/pull/1929

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
3 months agonftables: bump to version 0.9.2
Konstantin Demin [Wed, 21 Aug 2019 06:25:06 +0000 (09:25 +0300)]
nftables: bump to version 0.9.2

- exclude Python-related stuff from build
- drop patches:
  * 010-uclibc-ng.patch, applied upstream

ipkg size decrease by 2.8%:
old:
194.851 nftables_0.9.0-2_arm_cortex-a7_neon-vfpv4.ipk
new:
189.581 nftables_0.9.2-1_arm_cortex-a7_neon-vfpv4.ipk

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
3 months agolibnftnl: bump to version 1.1.4
Konstantin Demin [Wed, 21 Aug 2019 06:41:07 +0000 (09:41 +0300)]
libnftnl: bump to version 1.1.4

ABI version is same.

The ipkg size increase by about 2.2%:
old:
47.909 libnftnl11_1.1.3-1_arm_cortex-a7_neon-vfpv4.ipk
new:
48.985 libnftnl11_1.1.4-1_arm_cortex-a7_neon-vfpv4.ipk

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
3 months agomvebu: fix Linksys WRT LAN/WAN MAC addresses
DENG Qingfang [Wed, 21 Aug 2019 14:40:48 +0000 (22:40 +0800)]
mvebu: fix Linksys WRT LAN/WAN MAC addresses

According to 02_network, eth0.1 is LAN and eth1.2 is WAN,
but $mac_wan was assigned incorrectly to eth0 in preinit.

Swap eth0 and eth1 to fix this.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
3 months agokernel: net_sched: fix a NULL pointer deref in ipt action
Cong Wang [Sun, 25 Aug 2019 12:35:06 +0000 (05:35 -0700)]
kernel: net_sched: fix a NULL pointer deref in ipt action

The net pointer in struct xt_tgdtor_param is not explicitly
initialized therefore is still NULL when dereferencing it.
So we have to find a way to pass the correct net pointer to
ipt_destroy_target().

The best way I find is just saving the net pointer inside the per
netns struct tcf_idrinfo, which could make this patch smaller.

Fixes: 0c66dc1ea3f0 ("netfilter: conntrack: register hooks in netns when needed by ruleset")
Reported-and-tested-by: Tony Ambardar <itugrok@xxxxxxxxx>
Cc: Jamal Hadi Salim <jhs@xxxxxxxxxxxx>
Cc: Jiri Pirko <jiri@xxxxxxxxxxx>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
[Backport for kernel v4.19 and v4.14]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204681]
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
3 months agorpcd: update to latest Git HEAD
Jo-Philipp Wich [Sun, 1 Sep 2019 16:33:03 +0000 (18:33 +0200)]
rpcd: update to latest Git HEAD

821045f file: add path based read/write/exec ACL checks
fb337e5 file: add stat() information to directory listings

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 months agouhttpd: add support to generate EC keys
Eneas U de Queiroz [Mon, 5 Aug 2019 18:34:39 +0000 (15:34 -0300)]
uhttpd: add support to generate EC keys

This adds the key_type and ec_curve options to enable the generation of
EC keys during initialization, using openssl or the new options added to
px5g.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
3 months agopx5g: support EC keys
Eneas U de Queiroz [Mon, 5 Aug 2019 18:34:38 +0000 (15:34 -0300)]
px5g: support EC keys

This adds an 'eckey' command to generate an EC key, with an optional
curve name argument, with P-256 as default.

For the 'selfsigned' command, it adds an 'ec' algorithm argument to the
'-newkey' option, and a '-pkeyopt ec_paramgen_curve:<curvename>' option,
mirroring the way openssl specifies the curve name.

Notice that curve names are not necessarily the same in mbedtls and
openssl.  In particular, secp256r1 works for mbedtls, but openssl uses
prime256v1 instead. px5g uses mbedtls, but short NIST curve names P-256
and P-384 are specifically supported.

Package size increased by about 900 bytes (arm).

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
3 months agoopenssl: always build with EC support
Eneas U de Queiroz [Mon, 5 Aug 2019 18:34:37 +0000 (15:34 -0300)]
openssl: always build with EC support

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
3 months agoath79: image: disable sysupgrade images for routerstations and ja76pf2
Tomasz Maciej Nowak [Fri, 23 Aug 2019 13:50:52 +0000 (15:50 +0200)]
ath79: image: disable sysupgrade images for routerstations and ja76pf2

Because a bug in handling partial erase blocks in 4.19 kernel, using
sysupgrade images will hard brick devices that use RedBoot bootloader
and have "FIS directory" with "RedBoot config" on the same erase block.
Since flashing the devices from bootloader is safe, and to not cause a
situation where external chip programmer or JTAG is needed, disable
sysupgrade images for affected boards while creating kernel.bin and
rootfs.bin for jjPlus JA76PF2 board, which doesn't have factory image.

To set up the JA76PF2 board follow "Installation" instructions in b3a0c97
("ath79: add support for jjPlus JA76PF2") except the part of loading
initramfs image and using sysupgrade image for flashing (point 6 and 7).
Enter following commands to flash the board from bootloader:
  fis init
  load -r -b 0x80060000 <openwrt_kernel_image_name>
  fis create linux
  load -r -b %{FREEMEMLO} <openwrt_rootfs_image_name>
  fis create rootfs
  fis load -l linux
  exec -c ""

For RouterStations use TFTP recovery procedure.

Ref: FS#2428
Cc: Matt Merhar <mattmerhar@protonmail.com>
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
3 months agoath79: fix FIS partition detection for 4.19 kernel
Tomasz Maciej Nowak [Fri, 23 Aug 2019 13:50:51 +0000 (15:50 +0200)]
ath79: fix FIS partition detection for 4.19 kernel

When bumping to 4.19 the patch responsible for scaning flash for FIS
partition got left out. Without it devices with RedBoot bootloader using
automatic partitions detection in dts won't boot with the new kernel.

Fixes: 3771176 ("ath79: add support for linux 4.19")
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
3 months agoath79: image: add supported string for routerstations and ja76pf2
Tomasz Maciej Nowak [Fri, 23 Aug 2019 13:50:50 +0000 (15:50 +0200)]
ath79: image: add supported string for routerstations and ja76pf2

Now that the md5 check is fixed and metadata present, sysupgrade on
ar71xx will complain about device not being supported by the image.
Since the cause is not matching strings for supported devices add them
accordingly.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
3 months agoath79: image: append metadata to routerstations and ja76pf2 images
Tomasz Maciej Nowak [Fri, 23 Aug 2019 13:50:49 +0000 (15:50 +0200)]
ath79: image: append metadata to routerstations and ja76pf2 images

This target enforces metadata check so add the necessary information. It
was previously removed because md5 sum check. When using these sysupgrade
images on ar71xx target the check would complain about them not matching.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
3 months agoar71xx: sysupgrade: accept ath79 combined-image
Tomasz Maciej Nowak [Fri, 23 Aug 2019 13:50:48 +0000 (15:50 +0200)]
ar71xx: sysupgrade: accept ath79 combined-image

There is md5 sum of whole image embedded in combined-image header which
is checked on sysupgrade. The check will fail for ath79 images which
may have embedded metadata. This is because metadata are appended after
the combined image is created. To allow smooth transition from ar71xx to
ath79, strip metadata before calculating md5 sum for whole image.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
3 months agoath79: image: retire combined-image for Adtran/Bluesocket devices
Tomasz Maciej Nowak [Fri, 23 Aug 2019 13:50:47 +0000 (15:50 +0200)]
ath79: image: retire combined-image for Adtran/Bluesocket devices

During review it slipped by that these devices use combined-image which
should never be used for newly added ones. Therefore switch to
sysupgrade-tar generated images introduced in 8f6f260 ("ath79:
routerstation: prepare to use sysupgrade-tar format image"). The
sysupgrade accepts both images for now so no reression should occur.

Cc: Brian Gonyer <bgonyer@gmail.com>
Cc: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
3 months agoath79: dts: fix ja76pf2 spi frequency
Tomasz Maciej Nowak [Fri, 23 Aug 2019 13:50:46 +0000 (15:50 +0200)]
ath79: dts: fix ja76pf2 spi frequency

The frequency was filled acording the information from datasheet for
particular chip (Winbond 25Q128BVFG). Unfortunately this led to
coruption and introduced bad blocks on the chip. Reducing the frequency
to commonly used in ath79, made the board more stable and no new bad
blocks were spoted.

Fixes: b3a0c97 ("ath79: add support for jjPlus JA76PF2")
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
3 months agoath79: correct OCEDO Ursus phy-mode property
David Bauer [Sat, 31 Aug 2019 14:47:31 +0000 (16:47 +0200)]
ath79: correct OCEDO Ursus phy-mode property

This fixes the previously incorrect phy-mode for the OCEDO Ursus GMAC0.

See 62abbd587dc9 ("ath79: correct various phy-mode properties")
for more details.

Signed-off-by: David Bauer <mail@david-bauer.net>
3 months agoipq806x: Replace backticks by $(...)
Adrian Schmutzler [Wed, 24 Jul 2019 22:43:00 +0000 (00:43 +0200)]
ipq806x: Replace backticks by $(...)

This replaces deprecated backticks by more versatile $(...) syntax.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 months agoar71xx: WNR2200: remove redundant GPIO for WLAN LED
Michal Cieslakiewicz [Fri, 2 Aug 2019 15:12:34 +0000 (17:12 +0200)]
ar71xx: WNR2200: remove redundant GPIO for WLAN LED

Without this patch, an extra entry appears for AR9287 GPIO
that duplicates WLAN LED but in fact drives nothing:

gpiochip1: GPIOs 502-511, ath9k-phy0:
 gpio-502 (                    |netgear:blue:wlan   ) out hi
 gpio-503 (                    |netgear:amber:test  ) out hi
 gpio-504 (                    |netgear:green:power ) out lo
 gpio-505 (                    |rfkill              ) in  hi
 gpio-507 (                    |wps                 ) in  hi
 gpio-508 (                    |reset               ) in  hi
 gpio-510 (                    |ath9k-phy0          ) out hi <===!

The pin pointed above is default LED GPIO (8) for AR9287.
For WNR2200 it is not connected anywhere - pin 0 drives blue WLAN
LED instead - but initialization code is missing that information.

This fix calls ap9x_pci_setup_wmac_led_pin() function at device
setup, forcing WLAN LED pin to be 0 and removing redundant entry.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
3 months agolibnfnetlink: Avoid passing both -fPIC and -fpic
Rosen Penev [Tue, 27 Aug 2019 22:49:22 +0000 (15:49 -0700)]
libnfnetlink: Avoid passing both -fPIC and -fpic

Instead, instruct the configure script to use $(FPIC) only.

Mixing -fPIC and -fpic can cause issues on some platforms like PPC.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
3 months agoncurses: Do not pass both -fPIC and -fpic
Rosen Penev [Tue, 27 Aug 2019 22:49:21 +0000 (15:49 -0700)]
ncurses: Do not pass both -fPIC and -fpic

The configure scripts matches Linux with -fPIC, which is not exactly what
is desired. Since we are already passing $(FPIC), added a CONFIGURE_VAR to
avoid passing -fPIC.

Removed PKG_BUILD_DIR as it is already the default value.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
3 months agoath79: etactica-eg200: fix restore button
Karl Pálsson [Mon, 12 Aug 2019 16:37:34 +0000 (16:37 +0000)]
ath79: etactica-eg200: fix restore button

The button is labelled reboot/restore in documentation, and has always
been used for that.  Naming it WPS has always been wrong.

Signed-off-by: Karl Pálsson <karlp@etactica.com>
[matched author to SoB]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 months agoramips: add support for Netgear R6260 and R6850
Christoph Krapp [Thu, 29 Aug 2019 08:08:38 +0000 (10:08 +0200)]
ramips: add support for Netgear R6260 and R6850

As Netgear uses the same image for R6260, R6350 & R6850
we can merge device tree files and generate separate
images for each device.

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
[add missing WiFi compatible string, fix network
configuration]
Signed-off-by: David Bauer <mail@david-bauer.net>
3 months agoramips: add factory image for Netgear R6350
Christoph Krapp [Thu, 29 Aug 2019 18:12:30 +0000 (20:12 +0200)]
ramips: add factory image for Netgear R6350

This adds factory image generation for all three
devices. These images can be flashed via WebUI
for easy installation.

Thanks to David Bauer for the inspiration.

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
[altered commit to only include the R6350]
Signed-off-by: David Bauer <mail@david-bauer.net>
3 months agoramips: add mt7615e support to Netgear R6350
Christoph Krapp [Thu, 29 Aug 2019 08:06:12 +0000 (10:06 +0200)]
ramips: add mt7615e support to Netgear R6350

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
3 months agoramips: fix network setup for various NETGEAR boards
David Bauer [Fri, 30 Aug 2019 20:41:18 +0000 (22:41 +0200)]
ramips: fix network setup for various NETGEAR boards

There are currently the following issues present for the Netgear R6220,
R6350 and WNDR3700 v5:

 - LAN and WAN MAC-addresses are inverted
 - WAN MAC-address is off. It are +2 compared to the LAN MAC-address
   (R6350 only)
 - Switchport order is inverted in LuCi

This commit fixes both these issues by assigning correct MAC-addresses
to LAN and WAN interfaces and defining the switchports with the correct
labels.

Signed-off-by: David Bauer <mail@david-bauer.net>
3 months agoramips: use phy trigger for various Netgear boards
David Bauer [Fri, 30 Aug 2019 18:11:45 +0000 (20:11 +0200)]
ramips: use phy trigger for various Netgear boards

This commit switches the default trigger for the WiFi LED from a netdev
trigger on "wlan0" to a wireless-phy based trigger. THis allows the LED
to work, even when the wireless interface is not named "wlan0" without
modifiying the LED settings.

Signed-off-by: David Bauer <mail@david-bauer.net>
3 months agoramips: add factory image for NETGEAR R6220
David Bauer [Tue, 27 Aug 2019 21:55:12 +0000 (23:55 +0200)]
ramips: add factory image for NETGEAR R6220

This adds an easy-installation factory image for the NETGEAR R6220
router. The factory image can either be flashed via the vendor Web-UI or
the bootloader using nmrpflash.

Tested with NETGEAR V1.1.0.86 firmware.

Signed-off-by: David Bauer <mail@david-bauer.net>
3 months agoramips: disable badblock shifting for MT7621 NAND
David Bauer [Wed, 28 Aug 2019 21:40:51 +0000 (23:40 +0200)]
ramips: disable badblock shifting for MT7621 NAND

The MediaTek MT7621 NAND driver currently intransparently shifts NAND
pages when a block is marked as bad. Because of this, offsets for e.g.
caldata and MAC-addresses seem to be off.

This is, howeer, not a task for the mtd NAND driver, as the flash
translation layer is tasked with this.

This patch disables this badblock shifting. This fix was originally
proposed by Jo-Philipp Wich at
https://bugs.openwrt.org/index.php?do=details&task_id=1926

Fixes FS#1926 ("MTD partition offset not correctly mapped when bad
eraseblocks present")
Signed-off-by: David Bauer <mail@david-bauer.net>
3 months agolua: create lua symlink for host installation
David Bauer [Wed, 28 Aug 2019 18:47:02 +0000 (20:47 +0200)]
lua: create lua symlink for host installation

Since the binaries for both lua as well as lua5.3 contain the version
number, invocations of the "lua" binary are failing, as it's not created
anymore for the host package.

Fixes: fe59b46 ("lua: include version number in installed files")
Signed-off-by: David Bauer <mail@david-bauer.net>
3 months agobuild: remove harmful -nopad option from mksquashfs
Christian Lamparter [Fri, 30 Aug 2019 14:52:25 +0000 (16:52 +0200)]
build: remove harmful -nopad option from mksquashfs

While the -nopad option prevents mksquashfs from padding the
image to an arbitrary 4k. It does not take into consideration
that squashfs is programmed to have this 4k padding when it's
being used on on a block device... which is its main "use-case".

Now, after a week long discussion on the ML that included a
back-and-forth between some of the possible options.
But this is likely the best KISS patch to deal with the issue
right away given the limited resources.

From squashfs code point of view, be warned. The 4k padding is
not enough when dealing with devices that have a PAGE_SIZE
bigger than 4k.

if it turns out to be affecting you, then please look-up either:
"FS#2460 - kernel panic reading squashfs from ubi volume" bug
Or the discussion on the OpenWrt-Devel ML in
"amp821xx: use newly added pad-squashfs for Meraki MR24" and
"Squashfs breakage lottery with UBI..."
before making an educated guess.

Note: This will not affect the "tiny"/small flash devices as
much as it seems at first. This is because the the rootfs_data
partition that follows uses jffs2. And it requires to be aligned
to the flash block-size in order to work at all.

So either the involved FSes will meet in the middle as before,
or not at all. But in that latter case the image was already
hoping for the "undefined behaviour" gamble to turn out in its
favour and this is probably why this was unnoticed for so long.

Fixes: FS#2460
Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 months agokernel: bump 4.19 to 4.19.69
Koen Vandeputte [Thu, 29 Aug 2019 10:30:46 +0000 (12:30 +0200)]
kernel: bump 4.19 to 4.19.69

Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 4.14 to 4.14.141
Koen Vandeputte [Thu, 29 Aug 2019 10:29:06 +0000 (12:29 +0200)]
kernel: bump 4.14 to 4.14.141

Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agobase-files: use JSON for storing firmware validation info
Rafał Miłecki [Fri, 23 Aug 2019 06:15:23 +0000 (08:15 +0200)]
base-files: use JSON for storing firmware validation info

So far firmware validation result was binary limited: it was either
successful or not. That meant various limitations, e.g.:
1) Lack of proper feedback on validation problems
2) No way of marking firmware as totally broken (impossible to install)

This change introduces JSON for storing detailed validation info. It
provides a list of performed validation tests and their results. It
allows marking firmware as non-forceable (broken image that can't be
even forced to install).
Example:
{
        "tests": {
                "fwtool_signature": true,
                "fwtool_device_match": true
        },
        "valid": true,
        "forceable": true
}

Implementation is based on *internal* check_image bash script that:
1) Uses existing validation functions
2) Provides helpers for setting extra validation info

This allows e.g. platform_check_image() to call notify_check_broken()
when needed & prevent user from bricking a device.

Right now the new JSON info is used by /sbin/sysupgrade only. It still
doesn't make use of "forceable" as that is planned for later
development.

Further plans for this feature are:
1) Expose firmware validation using some new ubus method
2) Move validation step from /sbin/sysupgrade into "sysupgrade" ubus
   method so:
   a) It's possible to safely sysupgrade using ubus only
   b) /sbin/sysupgrade can be more like just a CLI

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 months agomediatek: backport a pcie fix
John Crispin [Fri, 30 Aug 2019 05:28:47 +0000 (07:28 +0200)]
mediatek: backport a pcie fix

PCI/e probe was failing under certain situations.

Signed-off-by: John Crispin <john@phrozen.org>
3 months agolinux-firmware: add mediatek BT firmware
John Crispin [Fri, 30 Aug 2019 05:27:51 +0000 (07:27 +0200)]
linux-firmware: add mediatek BT firmware

Signed-off-by: John Crispin <john@phrozen.org>
3 months agomac80211: rt2x00: revert commit causing regression in 5GHz band
Daniel Golle [Thu, 29 Aug 2019 20:26:42 +0000 (22:26 +0200)]
mac80211: rt2x00: revert commit causing regression in 5GHz band

From: Stanislaw Gruszka <sgruszka@redhat.com>
This reverts commit 9ad3b55654455258a9463384edb40077439d879f.

As reported by Sergey:

"I got some problem after upgrade kernel to 5.2 version (debian testing
linux-image-5.2.0-2-amd64). 5Ghz client  stopped to see AP.
Some tests with 1metre distance between client-AP: 2.4Ghz  -22dBm, for
5Ghz - 53dBm !, for longer distance (8m + walls) 2.4 - 61dBm, 5Ghz not
visible."

It was identified that rx signal level degradation was caused by
9ad3b5565445 ("rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band").
So revert this commit.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 months agomvebu: sysupgrade: fix uDPU eMMC check regression
Vladimir Vid [Thu, 29 Aug 2019 15:26:12 +0000 (17:26 +0200)]
mvebu: sysupgrade: fix uDPU eMMC check regression

Add udpu_ prefix in all other function names

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
3 months agobrcm2708: remove duplicated patch
Álvaro Fernández Rojas [Thu, 29 Aug 2019 14:19:00 +0000 (16:19 +0200)]
brcm2708: remove duplicated patch

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 months agokernel: add disable_eap_hack sysfs attribute
Etienne Champetier [Tue, 13 Aug 2019 03:06:13 +0000 (20:06 -0700)]
kernel: add disable_eap_hack sysfs attribute

We are not sure if 640-bridge-only-accept-EAP-locally.patch is still needed
as a first step, add disable_eap_hack sysfs config to allow to disable it

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
3 months agoscripts/feeds: allow adding parameters to feeds
Jo-Philipp Wich [Wed, 28 Aug 2019 13:21:35 +0000 (15:21 +0200)]
scripts/feeds: allow adding parameters to feeds

this allows adding "--" prefixed parameters inside feeds.conf between the
target and name. The first parameter is --force which has the same effect
as using -f when installing any of the packages. This allows creating
feeds that will override base packages by default.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 months agoprocd: fix compile issue with glibc (FS#2469)
Hans Dedecker [Wed, 28 Aug 2019 13:28:57 +0000 (15:28 +0200)]
procd: fix compile issue with glibc (FS#2469)

0430252 sysupgrade: add missing _GNU_SOURCE define (FS#2469)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
3 months agomediatek: update v4.19 switch support to latest vendor version
John Crispin [Wed, 28 Aug 2019 13:20:22 +0000 (15:20 +0200)]
mediatek: update v4.19 switch support to latest vendor version

Signed-off-by: John Crispin <john@phrozen.org>
3 months agoath9k: backport dynack improvements
Koen Vandeputte [Wed, 28 Aug 2019 10:12:41 +0000 (12:12 +0200)]
ath9k: backport dynack improvements

Close cooperation with Lorenzo Bianconi resulted
in these patches which fix all remaining seen issues
when using dynack.

Fix link losses when:
- Late Ack's are not seen or not present
- switching from too low static coverage class to dynack on a live link

These are fixed by setting the Ack Timeout/Slottime to
the max possible value for the currently used channel width when
a new station has been discovered.

When traffic flows, dynack is able to adjust to optimal values
within a few packets received (typically < 1 second)

These changes have been thoroughly tested on ~60 offshore devices
all interconnected using mesh over IBSS and dynack enabled on all.

Distances between devices varied from <100m up to ~35km

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
3 months agokernel: bump 4.19 to 4.19.68
Koen Vandeputte [Wed, 28 Aug 2019 09:41:37 +0000 (11:41 +0200)]
kernel: bump 4.19 to 4.19.68

Refreshed all patches.

Remove upstreamed:
- 950-0307-Revert-pwm-Set-class-for-exported-channels-in-sysfs.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 4.14 to 4.14.140
Koen Vandeputte [Tue, 27 Aug 2019 10:29:14 +0000 (12:29 +0200)]
kernel: bump 4.14 to 4.14.140

Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 4.9 to 4.9.190
Koen Vandeputte [Tue, 27 Aug 2019 10:25:06 +0000 (12:25 +0200)]
kernel: bump 4.9 to 4.9.190

Refreshed all patches.

Fixes:
- CVE-2019-3900

Compile-tested on: none
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agofstools: update to latest Git HEAD
Jo-Philipp Wich [Wed, 28 Aug 2019 10:26:53 +0000 (12:26 +0200)]
fstools: update to latest Git HEAD

6a61b9a probe: fallback to libblkid.so.1 when libblkid.so does not exist

Also remove deprecation notices from init script while we're at it.

Fixes: FS#2274
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 months agoiwinfo: update to latest Git HEAD
Jo-Philipp Wich [Wed, 28 Aug 2019 10:08:39 +0000 (12:08 +0200)]
iwinfo: update to latest Git HEAD

a9f9557 nl80211: support reading hardware id from phy directly
c586cd3 iwinfo: add device id for MediaTek MT7612E
d4382dd iwinfo: add device id for Atheros AR9390

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 months agobrcm2708-gpu-fw: update to latest firmware
Álvaro Fernández Rojas [Tue, 27 Aug 2019 13:20:20 +0000 (15:20 +0200)]
brcm2708-gpu-fw: update to latest firmware

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 months agobrcm2708: fix DMA leaks in bcm2835-mmc
Álvaro Fernández Rojas [Tue, 27 Aug 2019 13:19:26 +0000 (15:19 +0200)]
brcm2708: fix DMA leaks in bcm2835-mmc

Add patches from https://github.com/raspberrypi/linux/pull/3164

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 months agobrcm2708: update to latest patches from RPi foundation
Álvaro Fernández Rojas [Fri, 9 Aug 2019 17:50:30 +0000 (19:50 +0200)]
brcm2708: update to latest patches from RPi foundation

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 months agoar71xx/ath79: ag71xx: dont fetch the same var again
Koen Vandeputte [Mon, 12 Aug 2019 10:18:15 +0000 (12:18 +0200)]
ar71xx/ath79: ag71xx: dont fetch the same var again

tx_size was just declared above and set to BIT(tx->order)
Use the declaration instead, which could avoid a pointer deref

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agoar71xx: ag71xx: use base address value directly from the source
Koen Vandeputte [Wed, 7 Aug 2019 15:06:09 +0000 (17:06 +0200)]
ar71xx: ag71xx: use base address value directly from the source

This brings the code more inline with the ath79 flavour

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agoar71xx: ag71xx: make use of managed dev API simplifying code
Koen Vandeputte [Wed, 7 Aug 2019 13:12:54 +0000 (15:12 +0200)]
ar71xx: ag71xx: make use of managed dev API simplifying code

Backport of a4eef43a120d ("ath79: ag71xx: replace alloc_etherdev with devm_alloc_etherdev")
combined with the initial changes from John Crispin.

Simplifies the code a lot by using the Managed dev API.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agoar71xx: ag71xx: replace ag71xx_get_phy_if_mode_name with phy_modes()
Koen Vandeputte [Wed, 7 Aug 2019 12:23:00 +0000 (14:23 +0200)]
ar71xx: ag71xx: replace ag71xx_get_phy_if_mode_name with phy_modes()

Backport of f73b2d64ed56 ("ath79: ag71xx: replace ag71xx_get_phy_if_mode_name() with phy_modes()")

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agoar71xx: ag71xx: pass correct device pointer to dma
Koen Vandeputte [Mon, 12 Aug 2019 10:00:55 +0000 (12:00 +0200)]
ar71xx: ag71xx: pass correct device pointer to dma

Backport of 4eaa3626a821 ("ath79: ag71xx: pass correct device pointer to dma functions")

While 4.14 does not contain the warnings,
it still makes sense to use the proper pointers here.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agoar71xx/ath79: ag71xx: get ring_mask consistent
Koen Vandeputte [Thu, 8 Aug 2019 09:05:11 +0000 (11:05 +0200)]
ar71xx/ath79: ag71xx: get ring_mask consistent

All other instances of this identical declaration fetch the
value directly from the ring_order.

Also do it here.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agoar71xx: ag71xx: add missing register writes
Koen Vandeputte [Wed, 7 Aug 2019 15:08:05 +0000 (17:08 +0200)]
ar71xx: ag71xx: add missing register writes

These are added in ath79, but were not backported here

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agotools/mtd-utils: update to 2.1.1
DENG Qingfang [Sat, 17 Aug 2019 16:29:49 +0000 (00:29 +0800)]
tools/mtd-utils: update to 2.1.1

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
3 months agomtd-utils: update to 2.1.1
DENG Qingfang [Tue, 6 Aug 2019 19:59:13 +0000 (03:59 +0800)]
mtd-utils: update to 2.1.1

Removed upstream patch
Compile and run tested on mvebu

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
3 months agokernel: bump 4.19 to 4.19.67
Koen Vandeputte [Fri, 16 Aug 2019 11:26:23 +0000 (13:26 +0200)]
kernel: bump 4.19 to 4.19.67

Refreshed all patches.

Also add a missing symbol for x86 which got used now in this bump.
- ISCSI_IBFT

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 4.14 to 4.14.139
Koen Vandeputte [Fri, 16 Aug 2019 11:24:56 +0000 (13:24 +0200)]
kernel: bump 4.14 to 4.14.139

Refreshed all patches.

Also add a missing symbol for x86 which got used now in this bump.
- ISCSI_IBFT

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agoath10k-firmware: update Candela Tech firmware images
Koen Vandeputte [Fri, 16 Aug 2019 08:06:51 +0000 (10:06 +0200)]
ath10k-firmware: update Candela Tech firmware images

This should fix a problem with 1560 MTU, 160Mhz on DFS channels,
some other small issues on < 5.2 kernels, and for 5.2 driver,
it pulls in some upstream stable fixes.

wave-1 firmware changes since last update:

  *  June 24, 2019: Try allocating low-priority WMI msgs if high-prio are not available.

  *  June 24, 2019: Init rate-ctrl to start at lowest rate instead of in the middle.  Hoping
                    this helps DHCP when station connects from a long distance.

wave-2:

  *  June 24, 2019  Start rate-ctrl at minimal values to help DHCP work better for far-away peers.

  *  July 24, 2019  Fix old regression that made /a (and probably /b/g) perform poorly, at least on
                    diet-compiled images.

  *  Aug 8, 2019  Improve a/b/g rate-ctrl by damping the PER swings caused by the all-or-nothing logic
                  of transmitting non-block-ack frames one at a time.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: move crypto-arc4 into a module
Felix Fietkau [Sat, 24 Aug 2019 12:02:31 +0000 (14:02 +0200)]
kernel: move crypto-arc4 into a module

It is no longer required by wireless drivers, so we can save some space here

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agomt76: update to the latest version
Felix Fietkau [Mon, 26 Aug 2019 14:47:23 +0000 (16:47 +0200)]
mt76: update to the latest version

fb0f432834c0 mt76: stop rx aggregation on station removal
76aada563b66 mt76: dma: reset q->rx_buf on rx reset
3245ca8b8aeb mt76: check of_get_mac_address for NULL as well to restore old kernel compat
8e495245ab3d mt76: mt7615: move mt7615_mac_get_key_info in mac.c
e4f48a8df6aa mt76: mt7615: add mt7615_mac_wtbl_addr routine
e8c95e5a41f0 mt76: mt7615: introduce mt7615_mac_wtbl_set_key routine
d998b90c4bed mt76: mt7615: remove wtbl_sec_key definition
60d279ec2762 mt76: mt7615: add set_key_cmd and mt76_wcid to mt7615_mac_wtbl_set_key signature
4947ad4eab6a mt76: introduce mt76_mmio_read_copy routine
4d9001b8ab1d mt76: mt7615: fix MT7615_WATCHDOG_TIME definition
3d6796b867b6 mt76: mt7603: fix watchdog rescheduling in mt7603_set_channel
8d7a48030005 mt76: mt7615: add 4 WMM sets support
ae0f11149248 mt76: mt7615: update cw_min/max related settings
8b7bbd017654 mt76: mt7603: fix some checkpatch warnings
e6045467848d mt76: mt7615: fix some checkpatch warnings
c415c676e255 mt76: mt76x02: fix some checkpatch warnings
f625afcedc9b mt76: switch to SPDX tag instead of verbose boilerplate text
4d57f1cee4aa mt76: mt7615: rework locking scheme for mt7615_set_channel
2becd13be766 mt76: mt7615: add Smart Carrier Sense support
20f0c196722a mt76: mt76x02: introduce mt76x02_pre_tbtt_enable and mt76x02_beacon_enable macros
ae83a05b1050 mt76: mt76x02: do not copy beacon skb in mt76x02_mac_set_beacon_enable
92fa62ace198 mt76: mt76x02u: enable multi-vif support
c6dabfe953af mt76: mt76x02u: enable survey support
1f44159b41ff mt76: mt7603: move survey_time in mt76_dev
9657e6304322 mt76: mt7615: enable survey support
af860c0decb1 mt76: move mt76_tx_tasklet in mt76 module
a9d2a28b39fc mt76: mt7603: remove unnecessary mcu queue initialization
281b10fc1fe6 mt76: mt7615: add BIP_CMAC_128 cipher support
37673a4181e4 mt76: fix some checkpatch warnings
a7fa32603981 mt76: add default implementation for mt76_sw_scan/mt76_sw_scan_complete
5c35bdf057af mt7615: apply calibration-free data from OTP
0e3baf0213c9 mt76: fix a leaked reference by adding a missing of_node_put
2d5928fef23d net: Remove dev_err() usage after platform_get_irq()
a0824197ab00 mt76: mt76x0e: disable 5GHz band for MT7630E
4d8a9f20610f mt76: do not send BAR frame on tx aggregation flush stop
2a0edbb4473b mt76: remove offchannel check in tx scheduling

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agomac80211: refresh patches
Christian Lamparter [Sat, 24 Aug 2019 15:16:05 +0000 (17:16 +0200)]
mac80211: refresh patches

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 months agoopenssl: refresh patches
Christian Lamparter [Sat, 24 Aug 2019 09:23:55 +0000 (11:23 +0200)]
openssl: refresh patches

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 months agoipq40xx: drop unreachable ipq-wifi package for the AP120C-AC
Christian Lamparter [Fri, 23 Aug 2019 17:38:29 +0000 (19:38 +0200)]
ipq40xx: drop unreachable ipq-wifi package for the AP120C-AC

Harri Hursti reported that ALFA Network AP120C-AC does not
work anymore due to: "Unknown package 'ipq-wifi-alfa-network_ap120c-ac'."

This patch fixes the issue by removing the stale package from
the device's dependencies as the calibration data is now
provided by the upstream board-2.bin.

Reported-by: Harri Hursti <harri@nordicinnovationlabs.com>
Fixes: 8f757d427cce ("ipq-wifi: drop upstreamed custom board-2.bin")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 months agoramips: add NAS goodies on U25AWF-H1 + U35[N|W]F
Christian Lamparter [Tue, 20 Aug 2019 20:14:02 +0000 (22:14 +0200)]
ramips: add NAS goodies on U25AWF-H1 + U35[N|W]F

These devices are sold as a "NAS HDD Enclousure"
and have a "NAS Media Streaming & File Server & AP" on
the box. That's why I think they should have some support
for the HDD right out-of-the-box.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 months agofstools: update to HEAD of 2019-07-01 - 1539b5
Christian Lamparter [Sun, 18 Aug 2019 00:31:36 +0000 (02:31 +0200)]
fstools: update to HEAD of 2019-07-01 - 1539b5

Update fstools to commit 1539b535ac327a3bc599d1ca871e14fd0dc3bba1

git log --pretty=oneline --abbrev-commit ff1ded63..1539b535

1539b53 libblkid-tiny: increment label size to 256
d563f3c libblkid-tiny: fix wrong btrfs label length
3957dd3 block: prevent mount point confusion
9b36dc2 libfstools: avoid false positives when matching devices and volumes

Created with the help of the make-package-update-commit.sh script.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 months agoath10k-ct: update to HEAD of 2019-08-14 - 9e5ab2
Christian Lamparter [Sun, 18 Aug 2019 00:21:46 +0000 (02:21 +0200)]
ath10k-ct: update to HEAD of 2019-08-14 - 9e5ab2

Update ath10k-ct to commit 9e5ab25027e0971fa24ccf93373324c08c4e992d

git log --pretty=oneline --abbrev-commit f0aa8130..9e5ab250

9e5ab25 ath10k-ct:  Update to latest 5.2 upstream, support bigger mtu, 160Mhz

Created with the help of the make-package-update-commit.sh script
and refresh patches.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 months agomake-ext4fs: update to HEAD of 2017-05-29 - eebda1
Christian Lamparter [Sun, 18 Aug 2019 00:37:51 +0000 (02:37 +0200)]
make-ext4fs: update to HEAD of 2017-05-29 - eebda1

Update make-ext4fs to commit eebda1d55d9701ace2700d7ae461697fadf52d1f

git log --pretty=oneline --abbrev-commit 484903e4..eebda1d5

eebda1d make_ext4: Add strict prototypes.
bb9cf91 make_ext4fs: Remove off64_t in favor of standard off_t

Created with the help of the make-package-update-commit.sh script.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 months agokernel: refresh patches
Luka Perkov [Sat, 24 Aug 2019 21:03:17 +0000 (23:03 +0200)]
kernel: refresh patches

Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>
3 months agomvebu: uDPU: add sysupgrade support
Vladimir Vid [Mon, 22 Jul 2019 11:08:18 +0000 (13:08 +0200)]
mvebu: uDPU: add sysupgrade support

This patch adds sysupgrade, uboot-env and networking support
for Methode uDPU device.

Device features 4 partitions:

-----------------------------------------
|  boot   | recovery  | rootfs |  misc  |
| (ext4)  |  (ext4)   | (fsf2) | (f2fs) |
_________________________________________

Idea was to use f2fs only but the u-boot currently lacks support
so first 2 partition are ext4 to be u-boot readable, and this was
a reason why custom build and sysupgrade sections were required.

On the sysupgrade, boot and rootfs partitions are updated, firmare
image and user configuration is saved on the misc partition and if
the upgrade was successfull, recovery partition will be updated on
after the reboot from preinit script. If the sysupgrade fails for any
reason, device will fallback to recovery initramfs image.

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
3 months agokernel: add i2c-pxa driver
Vladimir Vid [Tue, 23 Jul 2019 16:46:15 +0000 (18:46 +0200)]
kernel: add i2c-pxa driver

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
3 months agokernel: 4.19: backport mx25u12835f support from linux 5.0
Vladimir Vid [Thu, 11 Jul 2019 17:55:46 +0000 (19:55 +0200)]
kernel: 4.19: backport mx25u12835f support from linux 5.0

Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
3 months agoiproute2: update to 5.2.0
DENG Qingfang [Thu, 22 Aug 2019 04:14:00 +0000 (12:14 +0800)]
iproute2: update to 5.2.0

Remove upstream patches

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
3 months agomac80211: fix a regression in the minstrel_ht improvement patches
Felix Fietkau [Sat, 24 Aug 2019 10:41:19 +0000 (12:41 +0200)]
mac80211: fix a regression in the minstrel_ht improvement patches

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agoath79: add support for gl-ar750
Luochongjun [Fri, 23 Aug 2019 09:05:57 +0000 (17:05 +0800)]
ath79: add support for gl-ar750

This patch supports gl-ar750, which was previously supported by ar71xx.

Specification:
- SOC: QCA9531 (650MHz)
- Flash: 16 MiB (W25Q128FVSG)
- RAM: 128 MiB DDR2
- Ethernet: 10/100: 2xLAN + 10/100: 1xWAN
- Wireless: 2.4GHz (bgn) and 5GHz (ac)
- USB: 1x USB 2.0 port
- Switch: 1x switch
- Button: 1x reset button
- LED: 3x LEDS (white)

Flash instruction:
Support for sysupgrade directive upgrades, as well as luci upgrades.

Signed-off-by: Luochongjun <luochongjun@gl-inet.com>
3 months agoramips: add support for ADSLR G7
Zhenjian Zhang [Tue, 13 Aug 2019 06:30:29 +0000 (14:30 +0800)]
ramips: add support for ADSLR G7

SoC: MT7621AT
RAM: 256MB
Flash: 16M SPI
Ethernet: 5x GE ports
WiFi: 2.4G: MT7615N
5G: MT7615N

Flash instruction:
1.Modify the file to linux.bin
2.Set up FTP service
3.Computer settings fixed IP: 192.168.179.50 255.255.255.0
4.Turn on the power and press and hold the reset button until the indicator light is on for about 5 seconds.

Signed-off-by: Zhenjian Zhang <itdesk.zhang@gmail.com>
[fix mac location]
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
3 months agomac80211: rt2x00: import pending patches
Daniel Golle [Fri, 23 Aug 2019 16:09:04 +0000 (18:09 +0200)]
mac80211: rt2x00: import pending patches

https://patchwork.kernel.org/patch/11111605/
https://patchwork.kernel.org/patch/11110703/

Fixes: 91c84e87c249 ("mac80211: rt2x00: clear IV's on start to fix AP mode regression")
Fixes: 0b2c42ced21a ("mac80211: Update to version 5.2-rc7")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 months agoipqx0xx: add Generic subtarget
Paul Spooren [Thu, 22 Aug 2019 00:59:24 +0000 (14:59 -1000)]
ipqx0xx: add Generic subtarget

Both targets miss a subtarget causing an image naming style which is
different from other all othe targets, even tho it already uses
`x/generic/` as subfolder as if the subtarget would exist.

This commit adds the Generic subtarget resulting in consistent naming.

    ~/src/openwrt/openwrt/bin/targets/ipq806x/generic$ ls
    openwrt-ipq806x-generic-netgear_d7800-initramfs-uImage
    openwrt-ipq806x-generic-netgear-d7800.manifest
    openwrt-ipq806x-generic-netgear_d7800-squashfs-factory.img
    openwrt-ipq806x-generic-netgear_d7800-squashfs-sysupgrade.bin

CC: John Crispin <john@phrozen.org>
Signed-off-by: Paul Spooren <mail@aparcar.org>
3 months agolantiq: add device alias for Alpha ASL56026
Daniel Golle [Thu, 22 Aug 2019 14:23:18 +0000 (16:23 +0200)]
lantiq: add device alias for Alpha ASL56026

BT Openreach ECI VDSL Modem V-2FUb/I is an alias of Alpha ASL56026 as
also stated in the original commit message adding the device
(commit 6254a2028c "lantiq: add support for the Alpha ASL56026").

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 months agolantiq: sort device definitions in image/Makefile
Adrian Schmutzler [Thu, 22 Aug 2019 12:09:50 +0000 (14:09 +0200)]
lantiq: sort device definitions in image/Makefile

This sorts the device definitions in image/Makefile alphabetically
for each subtarget/block.

The order of blocks has not been touched.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
3 months agotreewide: sysupgrade: pass "save_partitions" option to the "sysupgrade" method
Rafał Miłecki [Fri, 16 Aug 2019 15:02:58 +0000 (17:02 +0200)]
treewide: sysupgrade: pass "save_partitions" option to the "sysupgrade" method

This explicitly lets stage2 know if partitions should be preserved. No
more "touch /tmp/sysupgrade.always.overwrite.bootdisk.partmap" hack.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 months agobase-files: pass "save_config" option to the "sysupgrade" method
Rafał Miłecki [Fri, 16 Aug 2019 14:54:38 +0000 (16:54 +0200)]
base-files: pass "save_config" option to the "sysupgrade" method

This explicitly lets stage2 know if config should be preserved.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 months agoprocd: update to latest git HEAD
Rafał Miłecki [Thu, 22 Aug 2019 11:45:45 +0000 (13:45 +0200)]
procd: update to latest git HEAD

9558031 system: support passing "options" to the "sysupgrade" ubus method

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 months agoramips: add device alias for Allnet ALL0239-3G
Daniel Golle [Thu, 22 Aug 2019 11:22:39 +0000 (13:22 +0200)]
ramips: add device alias for Allnet ALL0239-3G

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 months agoramips/mt76x8: add DEVICE_VENDOR for tl-wr840n-v5
Paul Spooren [Thu, 15 Aug 2019 19:53:10 +0000 (09:53 -1000)]
ramips/mt76x8: add DEVICE_VENDOR for tl-wr840n-v5

DEVICE_VENDOR is missing for this device.

Signed-off-by: Paul Spooren <mail@aparcar.org>
3 months agoimage.mk: keep underscores when sanitize PROFILE
Paul Spooren [Wed, 14 Aug 2019 18:51:36 +0000 (08:51 -1000)]
image.mk: keep underscores when sanitize PROFILE

Underscores don't harm in filenames, however the sanitize function from
version.mk replaces them, causing inconsistent filenames.

A fix tried to solve this previously via
dfe99645dbdd4460f394beaa3a05091cd40b5942 however I did not look close
enough:

openwrt-ath79-generic-8dev-carambola2.manifest # current
openwrt-ath79-generic_8dev-carambola2.manifest # patched
---------------------^

Eventually the sanitization of PROFILES *could* be removed as more and
more profiles follow the device tree approach of vendor_model, neither
containing upper case letters nor spaces.

Signed-off-by: Paul Spooren <mail@aparcar.org>
3 months agolantiq: split up DEVICE_TITLE
Moritz Warning [Thu, 11 Jul 2019 10:47:56 +0000 (12:47 +0200)]
lantiq: split up DEVICE_TITLE

DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT
Uses DEVICE_ALT* variables for alternative vendor/retailer names.

Signed-off-by: Moritz Warning <moritzwarning@web.de>
3 months agobuild: introduce ALT vendor/model/variant
Paul Spooren [Tue, 16 Jul 2019 11:56:08 +0000 (13:56 +0200)]
build: introduce ALT vendor/model/variant

Some devices are produced and sold under different names. To debloat
the buildroot but keeping it complete, new variables are introduced to
handle different namings. Below an example taken from a recent PR[0]

    DEVICE_VENDOR := Arcadyan
    DEVICE_MODEL := ARV4520PW
    DEVICE_ALT0_VENDOR := Vodafone
    DEVICE_ALT0_MODEL := Easybox 800
    DEVICE_ALT1_VENDOR := Airties
    DEVICE_ALT1_MODEL := WAV-281

With this commit the buildroot is extended to take care of up to three
alternative namings. The primary title plus alternatives names (if
defined) are shown in the `make menuconfig` dialog. Selecting on of
devices automatically selects all alternative names as they share the
same profile.

A list of the newly introduced variables:

    DEVICE_ALT0_VENDOR :=
    DEVICE_ALT0_MODEL :=
    DEVICE_ALT0_VARIANT :=
    DEVICE_ALT1_VENDOR :=
    DEVICE_ALT1_MODEL :=
    DEVICE_ALT1_VARIANT :=
    DEVICE_ALT2_VENDOR :=
    DEVICE_ALT2_MODEL :=
    DEVICE_ALT2_VARIANT :=

[0]: https://github.com/openwrt/openwrt/pull/2229/files#diff-b436f01932a18876c27800ba183d95f6R140

Signed-off-by: Paul Spooren <mail@aparcar.org>
3 months agofirewall: update to latest git HEAD
Kevin Darbyshire-Bryant [Tue, 20 Aug 2019 11:29:47 +0000 (12:29 +0100)]
firewall: update to latest git HEAD

bf29c1e firewall3: ipset: Handle reload_set properly

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
3 months agomac80211: backport support for the IEEE80211_KEY_FLAG_GENERATE_MMIE flag
Felix Fietkau [Wed, 21 Aug 2019 11:11:13 +0000 (13:11 +0200)]
mac80211: backport support for the IEEE80211_KEY_FLAG_GENERATE_MMIE flag

Required for an upcoming mt76 update

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agomac80211: add new minstrel_ht patches to improve probing on mt76x2
Felix Fietkau [Fri, 14 Jun 2019 19:32:15 +0000 (21:32 +0200)]
mac80211: add new minstrel_ht patches to improve probing on mt76x2

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agomac80211: renumber subsys patches after update
Felix Fietkau [Mon, 19 Aug 2019 17:15:35 +0000 (19:15 +0200)]
mac80211: renumber subsys patches after update

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agomac80211: remove TX_NEEDS_ALIGNED4_SKBS patch
Felix Fietkau [Mon, 19 Aug 2019 17:14:17 +0000 (19:14 +0200)]
mac80211: remove TX_NEEDS_ALIGNED4_SKBS patch

The intended performance benefit could not be reliably reproduced, and the
patch was not accepted upstream

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agoscripts/dl_github_archive.py: fix python3 transition
Yousong Zhou [Mon, 19 Aug 2019 13:39:18 +0000 (13:39 +0000)]
scripts/dl_github_archive.py: fix python3 transition

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>