Felix Fietkau [Mon, 7 Jul 2014 08:52:02 +0000 (08:52 +0000)]
rb532: add wan interface
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41543
Felix Fietkau [Mon, 7 Jul 2014 08:51:59 +0000 (08:51 +0000)]
rb532: fix jffs2 images
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41542
Felix Fietkau [Mon, 7 Jul 2014 08:51:55 +0000 (08:51 +0000)]
rb532: really fix squashfs images
The previous attempt (r40717) to fix squashfx made the system bootable but
overlayfs remained broken.
This enables block2mtd again using the right partition number and naming
and adds MTD_ROOTFS_SPLIT option.
However onboard rootfs partition name had to be renamed to place overlay on
CF instead of onboard NAND.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41541
Felix Fietkau [Mon, 7 Jul 2014 08:29:35 +0000 (08:29 +0000)]
broadcom-wl: disable mips16 support, fixes build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41540
Hauke Mehrtens [Sun, 6 Jul 2014 22:34:24 +0000 (22:34 +0000)]
kernel: do not build kernel modules by default
No config option should be set to m in the default config, because
there is also some script needed which picks the module up into the
image and that is missing this way. Always create a kmod when building
a module.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41539
Hauke Mehrtens [Sun, 6 Jul 2014 22:23:53 +0000 (22:23 +0000)]
mpc83xx: add support for kernel 3.10
This is compile tested only, please run test and report back.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41538
Hauke Mehrtens [Sun, 6 Jul 2014 22:05:09 +0000 (22:05 +0000)]
mpc52xx: add support for kernel 3.10
This is compile tested only, please run test and report back.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41537
Hauke Mehrtens [Sun, 6 Jul 2014 18:20:59 +0000 (18:20 +0000)]
au1000: add support for kernel 3.10
This is compile tested only, please run test and report back.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41534
Luka Perkov [Sun, 6 Jul 2014 18:10:49 +0000 (18:10 +0000)]
kernel: update 3.14 to 3.14.10
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 41533
Jonas Gorski [Sun, 6 Jul 2014 18:09:30 +0000 (18:09 +0000)]
ar7: enable the low-memory feature flag
Most ar7 devices have only 16 MiB RAM, so select low_mem to give them
a chance to work.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41532
Hauke Mehrtens [Sun, 6 Jul 2014 17:51:14 +0000 (17:51 +0000)]
gemini: add support for kernel 3.10
This is compile tested only, please run test and report back.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41531
Hauke Mehrtens [Sun, 6 Jul 2014 17:21:37 +0000 (17:21 +0000)]
brcm47xx: image: legacy: take over old devices images
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 41530
Hauke Mehrtens [Sun, 6 Jul 2014 17:14:29 +0000 (17:14 +0000)]
brcm47xx: image: mips74k: take over some device images
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41529
Hauke Mehrtens [Sun, 6 Jul 2014 17:14:06 +0000 (17:14 +0000)]
brcm47xx: image: prepare for using mips74k subtarget
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 41528
Hauke Mehrtens [Sun, 6 Jul 2014 13:45:43 +0000 (13:45 +0000)]
brcm47xx: fix bcm4705 rebooting when initializing the switch.
When the Ethernet controller is powered down and someone wants to
access the mdio bus like the witch driver (b53) the system crashed if
PCI_D3hot was set before. This patch deactivates this power sawing mode
when a switch driver is in use.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41527
Hauke Mehrtens [Sun, 6 Jul 2014 11:40:51 +0000 (11:40 +0000)]
b53: hardcode reset GPIO for Linksys WRT300N 1.1
According to the thread https://forum.openwrt.org/viewtopic.php?id=48281
b53 uses GPIO 7:
[ 4.470000] b53_common: [DBG] b53_switch_reset_gpio using 7
and causes device to self-reboot. GPIO 8 was found in CFE boot log:
"Reset switch via GPIO 8 ..."
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 41526
Hauke Mehrtens [Sun, 6 Jul 2014 11:23:13 +0000 (11:23 +0000)]
samba36: update to minor version 3.6.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41525
Hauke Mehrtens [Sun, 6 Jul 2014 10:58:14 +0000 (10:58 +0000)]
mac80211: b43: add support for firmware 784.2
This adds firmware 784.2 for b43 as an option.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41524
Hauke Mehrtens [Sun, 6 Jul 2014 10:34:34 +0000 (10:34 +0000)]
mac80211: update linux-firmware
This updates linux-firmware to version
7f388b4885cf64d6b7833612052d20d4197af96f from 2014-06-04.
In addition it adds new firmware for Intel, Broadcom and Realtek devices.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41523
Hauke Mehrtens [Sat, 5 Jul 2014 23:36:05 +0000 (23:36 +0000)]
cns21xx: make patch apply again
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41522
Hauke Mehrtens [Sat, 5 Jul 2014 23:35:36 +0000 (23:35 +0000)]
kernel: add missing config options
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41521
Hauke Mehrtens [Sat, 5 Jul 2014 23:25:26 +0000 (23:25 +0000)]
brcm47xx: add LEDs for Netgear WNR3500L
https://dev.openwrt.org/ticket/14406
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41520
Hauke Mehrtens [Sat, 5 Jul 2014 23:24:41 +0000 (23:24 +0000)]
broadcom-wl: improve setting leddc
Use leddc value from other routers and improve the script.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41519
Hauke Mehrtens [Sat, 5 Jul 2014 22:55:40 +0000 (22:55 +0000)]
broadcom-wl: fix led support
Some devices have an nvram setting, which make broadcom-wl turn of the
led all the time. When the driver is switched on and we find such a
setting we replace it with a better value.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41518
Hauke Mehrtens [Sat, 5 Jul 2014 21:35:15 +0000 (21:35 +0000)]
brcm47xx: make it possible to unregister the adm switch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41517
Hauke Mehrtens [Sat, 5 Jul 2014 19:40:15 +0000 (19:40 +0000)]
brcm47xx: fix LEDs on WRTSL54GS
https://dev.openwrt.org/ticket/16991
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41516
Hauke Mehrtens [Sat, 5 Jul 2014 19:36:49 +0000 (19:36 +0000)]
brcm47xx: increase fallback mac addresses by one
Now the mac address is increased by two for the first fallback mac
address. It could be that the address increased should be used for the
wan port.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41515
Hauke Mehrtens [Sat, 5 Jul 2014 19:23:40 +0000 (19:23 +0000)]
broadcom-wl: fixup mac addresses.
Some series of devices are using the same mac address, which causes
conflicts for these devices we generate a new mac address based on the
base address. This patch adds this functionality to braodcom-wl.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41514
Hauke Mehrtens [Sat, 5 Jul 2014 15:04:50 +0000 (15:04 +0000)]
brcm47xx: do not use mac addresses with 00:90:4C prefix, prevent mac address collisions.
The address prefix 00:90:4C is used by Broadcom in their initial
configuration. When a mac address with the prefix 00:90:4C is used
all devices from the same series are sharing the same mac address.
To prevent mac address collisions we replace them with a mac address
based on the base address.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41513
Hauke Mehrtens [Sat, 5 Jul 2014 12:15:03 +0000 (12:15 +0000)]
brcm47xx: get switch name from swconfig first
Without this patch the switch config for the adm switch did not worked,
because hey are not names eth0.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41512
Hauke Mehrtens [Sat, 5 Jul 2014 12:13:56 +0000 (12:13 +0000)]
adm6996: the GPIO interface for the adm6996l does not support switch statistics.
This patch deactivates the statistics, adds a missing lock
initialization and fixes a waring.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41511
Felix Fietkau [Fri, 4 Jul 2014 12:11:40 +0000 (12:11 +0000)]
scripts/abs2rel.pl: remove, it is unused
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41510
Felix Fietkau [Fri, 4 Jul 2014 11:42:57 +0000 (11:42 +0000)]
samba36: disable acl support to avoid picking up a dependency on libacl (#16988)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41509
Felix Fietkau [Fri, 4 Jul 2014 09:55:14 +0000 (09:55 +0000)]
samba36: do not pick up libattr as a dependency
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41508
John Crispin [Fri, 4 Jul 2014 08:28:40 +0000 (08:28 +0000)]
ar71xx/rb532: move rc32434-fix-broken-pci.patch to the correct target
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41507
Jonas Gorski [Fri, 4 Jul 2014 08:23:19 +0000 (08:23 +0000)]
brcm63xx: disable AUDIT
Reduces kernel size by about 24k (6k compressed).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41506
John Crispin [Fri, 4 Jul 2014 06:33:00 +0000 (06:33 +0000)]
ar71xx: MIPS: RC32434: fix broken PCI resource initialization
https://patchwork.linux-mips.org/patch/6940/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41505
Felix Fietkau [Fri, 4 Jul 2014 06:23:57 +0000 (06:23 +0000)]
build: temporarily disable PKG_CHECK_FORMAT_SECURITY until after the release
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41504
Jo-Philipp Wich [Thu, 3 Jul 2014 22:21:04 +0000 (22:21 +0000)]
rpcd: fix parsing of executable plugin output
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41502
Hauke Mehrtens [Thu, 3 Jul 2014 21:41:33 +0000 (21:41 +0000)]
brcm47xx: add LEDs for Asus RT-N15U and update RT-N66U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 41501
Hauke Mehrtens [Thu, 3 Jul 2014 21:40:59 +0000 (21:40 +0000)]
brcm47xx: migrate basic network settings from old releases
Old OpenWrt releases were using network configs that are not valid
anymore. They were specifying ports tagging in a different way (or were
not tagging CPU at all) and were using VID 0 which is a reserved value.
Modifying network configuration to apply all needed changes would be
pretty tricky. Script /etc/init.d/netconfig that generates new config is
quite complex itself.
So instead let's save the most important settings, regenerate config
from the scratch and restore values. This should work for 99% of users.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 41500
Hauke Mehrtens [Thu, 3 Jul 2014 20:22:33 +0000 (20:22 +0000)]
kernel: add missing config option
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41499
Felix Fietkau [Thu, 3 Jul 2014 18:57:47 +0000 (18:57 +0000)]
ubus: update to the latest version, fixes compile error regressions
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41496
Florian Fainelli [Thu, 3 Jul 2014 17:19:10 +0000 (17:19 +0000)]
realview: set LAN interface to be in DHCP
Realview is mostly used as a QEMU development platform, which will provide a
built-in DHCP server to NAT or bridge the connection outside of the emulated
environment.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 41495
Florian Fainelli [Thu, 3 Jul 2014 17:18:58 +0000 (17:18 +0000)]
realview: disable SWP emulation
This is not needed since our toolchain produces the expected binaries for the
target CPU.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 41494
John Crispin [Thu, 3 Jul 2014 11:56:56 +0000 (11:56 +0000)]
wrt55agv2-spidevs: fix compile issues
i think this breakage was introduced when linux moved to uapi header
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41493
Felix Fietkau [Thu, 3 Jul 2014 10:49:41 +0000 (10:49 +0000)]
ubus: update to the latest version, increases maximum message size and adds a few fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41492
Jo-Philipp Wich [Thu, 3 Jul 2014 09:21:44 +0000 (09:21 +0000)]
firewall: fix issue with parsing network options
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41491
Felix Fietkau [Thu, 3 Jul 2014 06:21:49 +0000 (06:21 +0000)]
rc.common: when reloading a service using procd, fall back to calling start instead of restart
This avoids unnecessary service restarts
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41490
Hauke Mehrtens [Wed, 2 Jul 2014 22:27:32 +0000 (22:27 +0000)]
mac80211: update regulatory database to master-2014-06-13
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41489
Hauke Mehrtens [Wed, 2 Jul 2014 22:07:46 +0000 (22:07 +0000)]
brcm47xx: add CONFIG_LEDS_GPIO_REGISTER
CONFIG_LEDS_GPIO_REGISTER is selected by the bcm47xx arch code.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41488
Hauke Mehrtens [Wed, 2 Jul 2014 22:03:03 +0000 (22:03 +0000)]
brcm47xx: refresh patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41487
Hauke Mehrtens [Wed, 2 Jul 2014 21:54:59 +0000 (21:54 +0000)]
brcm47xx: backport BCM47XX Linksys WRT54G series patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41486
Hauke Mehrtens [Wed, 2 Jul 2014 21:43:17 +0000 (21:43 +0000)]
iwinfo: fix string format for country code
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41485
Hauke Mehrtens [Wed, 2 Jul 2014 20:52:50 +0000 (20:52 +0000)]
b43-tools: update to version 019
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 41484
Felix Fietkau [Wed, 2 Jul 2014 19:18:23 +0000 (19:18 +0000)]
igmpproxy: automatically add firewall rules for multicast routing based on the current config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41483
Felix Fietkau [Wed, 2 Jul 2014 19:18:20 +0000 (19:18 +0000)]
procd: add a shell helper function to emit a config.change event
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41482
Felix Fietkau [Wed, 2 Jul 2014 19:18:16 +0000 (19:18 +0000)]
procd: add shell functions to add instance data
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41481
Felix Fietkau [Wed, 2 Jul 2014 19:18:13 +0000 (19:18 +0000)]
firewall: update to the latest version, adds support for fetching firewall rules from procd
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41480
Felix Fietkau [Wed, 2 Jul 2014 19:18:09 +0000 (19:18 +0000)]
iptables: refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41479
Felix Fietkau [Wed, 2 Jul 2014 19:18:05 +0000 (19:18 +0000)]
procd: update to the latest version, adds support for dumping per-instance service data with an optional type filter
also fixes a crash on stopping a service with triggers after reloading it
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41478
John Crispin [Wed, 2 Jul 2014 18:52:36 +0000 (18:52 +0000)]
kernel: disable CONFIG_IRQ_ALL_CPUS by default
this fixes the mpc85xx build error
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41477
John Crispin [Wed, 2 Jul 2014 16:37:30 +0000 (16:37 +0000)]
ramips: add missing rt3352 usb phy node to dts
Signed-off-by: michael <igvtee@gmail.com>
SVN-Revision: 41476
John Crispin [Wed, 2 Jul 2014 16:37:26 +0000 (16:37 +0000)]
ramips: fix target rt5350 only have 28 gpios
Signed-off-by: michael <igvtee@gmail.com>
SVN-Revision: 41475
John Crispin [Wed, 2 Jul 2014 16:37:23 +0000 (16:37 +0000)]
lantiq: UbinizeImage instead of lantiq-specific ubinize.cfg files
New make target in lantiq to use UbinizeImage and SysupgradeNand.
Only enabled for BTHOMEHUBV2B for the moment but should be useable
for other lantiq nand boards.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 41474
John Crispin [Wed, 2 Jul 2014 16:33:20 +0000 (16:33 +0000)]
lantiq: more PKG_CHECK_FORMAT_SECURITY fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41473
John Crispin [Wed, 2 Jul 2014 16:33:11 +0000 (16:33 +0000)]
lantiq: add support for /tmp/sysinfo
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41472
John Crispin [Wed, 2 Jul 2014 14:32:43 +0000 (14:32 +0000)]
ralink: make xhci platform depend on mt7621
this broke CONFIG_ALL builds for mt7620
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41471
John Crispin [Wed, 2 Jul 2014 12:56:20 +0000 (12:56 +0000)]
ubox: fix remote logging
in r41439 a flag for enabling remote logging was added,
but the actual check was done on a different variable.
Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>
SVN-Revision: 41467
Jo-Philipp Wich [Wed, 2 Jul 2014 12:41:36 +0000 (12:41 +0000)]
iproute2: re-enable PIC, it is only applied to libnetlink.a and required for collectd
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41460
Jo-Philipp Wich [Wed, 2 Jul 2014 11:39:28 +0000 (11:39 +0000)]
include: remove SDK exception from package install targets
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41459
Jo-Philipp Wich [Wed, 2 Jul 2014 11:39:24 +0000 (11:39 +0000)]
iptables: pass --disable-ipv6 is CONFIG_IPV6 is unset
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 41458
Felix Fietkau [Wed, 2 Jul 2014 08:19:43 +0000 (08:19 +0000)]
strace: fix build failure on arm
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41457
John Crispin [Wed, 2 Jul 2014 08:17:36 +0000 (08:17 +0000)]
lantiq: more PKG_CHECK_FORMAT_SECURITY related fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41456
John Crispin [Wed, 2 Jul 2014 08:00:44 +0000 (08:00 +0000)]
ar71xx: add missing config symbol
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41455
John Crispin [Wed, 2 Jul 2014 07:43:32 +0000 (07:43 +0000)]
lantiq: fix missing symbols
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41454
John Crispin [Wed, 2 Jul 2014 07:42:44 +0000 (07:42 +0000)]
ralink: add Wansview NCS601W IP Camera
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41453
John Crispin [Tue, 1 Jul 2014 18:17:55 +0000 (18:17 +0000)]
ralink: register wifi firmware for WRTnode
After r41444 wifi working on WRTnode. Tested.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41452
John Crispin [Tue, 1 Jul 2014 18:05:09 +0000 (18:05 +0000)]
ltq-vdsl-mei: disable PKG_CHECK_FORMAT_SECURITY
the build breaks when PKG_CHECK_FORMAT_SECURITY:=1
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41451
John Crispin [Tue, 1 Jul 2014 13:38:30 +0000 (13:38 +0000)]
ar71xx: Add support for MikroTik RouterBOARD SXT Lite
This patch adds support for the MikroTik RouterBOARD SXT Lite.
The new RB911L series is also supported as a result.
v2 of this patch fixes the wmac offset to match what is on the sticker.
v3 refreshes the patch against r41148 and defines the power led as the status led in diag.sh
v4 refreshes the patch against r41353 and fixes the patch path issue to make git am work correctly
v5 selects the kernel config option in the mikrotik profile rather than in the main ar71xx config
Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41450
John Crispin [Tue, 1 Jul 2014 13:18:38 +0000 (13:18 +0000)]
lantiq: Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget
Enable LANTIQ_PHY and LANTIQ_XRX200 only in XRX200 subtarget.
These drivers are not needed for ASE, Danube and AR9.
As side effect PHY11G and PHY22F firmwares are not included in the
kernel image, which saves 64 KB.
Signed off by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41449
John Crispin [Tue, 1 Jul 2014 13:18:27 +0000 (13:18 +0000)]
ramips: set default vid of each vlan, so it won't need be set explicitly.
Signed-off-by: Xiongfei Guo <xfguo@credosemi.com>
SVN-Revision: 41448
John Crispin [Tue, 1 Jul 2014 10:26:42 +0000 (10:26 +0000)]
ramips: add WHR-1166 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41447
John Crispin [Tue, 1 Jul 2014 10:26:38 +0000 (10:26 +0000)]
ramips: sync the WHR-600D flash layout with that of the vendor FW
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41446
John Crispin [Tue, 1 Jul 2014 10:26:33 +0000 (10:26 +0000)]
ramips: add wmac to mt7620a device tree
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41445
John Crispin [Tue, 1 Jul 2014 10:26:30 +0000 (10:26 +0000)]
ramips: add wmac to mt7620n device tree
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41444
John Crispin [Tue, 1 Jul 2014 10:26:25 +0000 (10:26 +0000)]
ramips: enable wmac clock for mt7620
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41443
John Crispin [Tue, 1 Jul 2014 10:26:21 +0000 (10:26 +0000)]
mac80211: enable driver compilation for mt7620
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41442
John Crispin [Tue, 1 Jul 2014 10:26:18 +0000 (10:26 +0000)]
mac80211: add support for mt7620
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 41441
John Crispin [Tue, 1 Jul 2014 10:26:14 +0000 (10:26 +0000)]
base-files: fix ramfs / nand upgrade
/lib/{imx6,lantiq,...}.sh are needed in the ramfs for sysupgrade to work.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41440
John Crispin [Tue, 1 Jul 2014 10:26:10 +0000 (10:26 +0000)]
ubox: add a flag that allows us to disable remote log while keeping the ip settings inside uci
this makes webui foo a lot easier
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41439
John Crispin [Tue, 1 Jul 2014 10:26:07 +0000 (10:26 +0000)]
ppp: fix keep alive option
currently the keepalive option needs to be removed to fully disable it. this patch allows us to set it to 0.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41438
John Crispin [Tue, 1 Jul 2014 10:26:03 +0000 (10:26 +0000)]
kernel: add japanese codepages
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41437
Imre Kaloz [Tue, 1 Jul 2014 09:45:41 +0000 (09:45 +0000)]
set led triggers for the Linksys WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41436
Imre Kaloz [Tue, 1 Jul 2014 09:43:38 +0000 (09:43 +0000)]
adjust default profile, and add an evalboard one
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41435
Imre Kaloz [Tue, 1 Jul 2014 09:36:38 +0000 (09:36 +0000)]
try to load the orion glue automatically
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41434
Imre Kaloz [Tue, 1 Jul 2014 09:35:22 +0000 (09:35 +0000)]
drop unneeded file
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 41433
Steven Barth [Tue, 1 Jul 2014 08:15:28 +0000 (08:15 +0000)]
odhcpd: some minor DHCP/DHCPv6 fixes
SVN-Revision: 41432
Felix Fietkau [Mon, 30 Jun 2014 15:34:03 +0000 (15:34 +0000)]
openvpn: fix compile error with musl
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 41425
Jonas Gorski [Mon, 30 Jun 2014 13:34:43 +0000 (13:34 +0000)]
brcm63xx: fix Livebox 1 support
The Livebox 1 support is currently broken. Fixed with this patch
Fixes:
- Redboot partitioning broken: fixed
- Replaced custom ephy reset with platform code
- USB code breaks the building process: fixed
- Led colors
- Removed unneded EHCI code since bcm6348 only has OHCI
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: drop unneded parts since merge, fixup to apply to current head]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 41424
projects / openwrt / openwrt.git / log