openwrt/openwrt.git
2 months agoOpenWrt v21.02.0-rc4: adjust config defaults v21.02.0-rc4
Hauke Mehrtens [Sun, 1 Aug 2021 17:38:53 +0000 (19:38 +0200)]
OpenWrt v21.02.0-rc4: adjust config defaults

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2 months agokernel: bump 5.4 to 5.4.137
Hauke Mehrtens [Thu, 29 Jul 2021 20:42:38 +0000 (22:42 +0200)]
kernel: bump 5.4 to 5.4.137

Manually rebased
  generic/pending-5.4/680-NET-skip-GRO-for-foreign-MAC-addresses.patch

All others updated automatically.

Compile-tested on: ramips/mt7621, armvirt/32
Runtime-tested on: ramips/mt7621, armvirt/32

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2 months agoramips: mt76x8: add missing config symbol
David Bauer [Thu, 29 Jul 2021 20:58:57 +0000 (22:58 +0200)]
ramips: mt76x8: add missing config symbol

PWM_MEDIATEK was not defined, breaking builds for the mt76x8 subtarget.

Signed-off-by: David Bauer <mail@david-bauer.net>
2 months agox86: move Kconfig symbol to common config
David Bauer [Thu, 29 Jul 2021 20:58:09 +0000 (22:58 +0200)]
x86: move Kconfig symbol to common config

This is required for all x86 targets. x86-legacy missed this config
symbol, breaking the build.

Signed-off-by: David Bauer <mail@david-bauer.net>
2 months agogeneric: add missing Kconfig symbol
David Bauer [Thu, 29 Jul 2021 20:57:24 +0000 (22:57 +0200)]
generic: add missing Kconfig symbol

Fixes build errors for sunxi as well as rockchip targets.

Signed-off-by: David Bauer <mail@david-bauer.net>
2 months agoath79: fix JT-OR750i switch LED assignment
David Bauer [Wed, 28 Jul 2021 12:17:13 +0000 (14:17 +0200)]
ath79: fix JT-OR750i switch LED assignment

The LEDs for LAN1 and LAN3 were swapped. Link on port 1 would illuminate
the LED on port 3 and vice versa.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit f0a885ed8636b9762d12f2eb2755f63297ff0cb5)

2 months agoath79: enable missing pinmux for JT-OR750i
David Bauer [Wed, 28 Jul 2021 11:52:22 +0000 (13:52 +0200)]
ath79: enable missing pinmux for JT-OR750i

Without explicit configuration of these pins the ethernet as well as
status LED of the device do not work correctly.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 4feb9a4211d4c8e118e6b8f01fa0bbd4eab5d35c)

2 months agoath79: add support for Joy-IT JT-OR750i
Vincent Wiemann [Sun, 20 Jun 2021 14:56:21 +0000 (16:56 +0200)]
ath79: add support for Joy-IT JT-OR750i

Specifications:
 * QCA9531, 16 MiB flash (Winbond W25Q128JVSQ), 128 MiB RAM
 * 802.11n 2T2R (external antennas)
 * QCA9887, 802.11ac 1T1R (connected with diplexer to one of the antennas)
 * 3x 10/100 LAN, 1x 10/100 WAN
 * UART header with pinout printed on PCB

Installation:
 * The device comes with a bootloader installed only
 * The bootloader offers DHCP and is reachable at http://10.123.123.1
 * Accept the agreement and flash sysupgrade.bin
 * Use Firefox if flashing does not work

TFTP recovery with static IP:
 * Rename sysupgrade.bin to jt-or750i_firmware.bin
 * Offer it via TFTP server at 192.168.0.66
 * Keep the reset button pressed for 4 seconds after connecting power

TFTP recovery with dynamic IP:
 * Rename sysupgrade.bin to jt-or750i_firmware.bin
 * Offer it via TFTP server with a DHCP server running at the same address
 * Keep the reset button pressed for 6 seconds after connecting power

Co-authored-by: Sebastian Schaper <openwrt@sebastianschaper.net>
Signed-off-by: Vincent Wiemann <vincent.wiemann@ironai.com>
(cherry picked from commit 55b4b3655263984b92e4b9fc515a5e6b8003c655)

2 months agonetifd: update to the latest version
Felix Fietkau [Mon, 26 Jul 2021 18:42:48 +0000 (20:42 +0200)]
netifd: update to the latest version

440eb0647708 bridge: fix regression in bringing up bridge ports

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit 39f81b0bf687017b4d086255c94166e662ac177e)

2 months agonetifd: update to the latest version
Felix Fietkau [Sun, 25 Jul 2021 04:26:20 +0000 (06:26 +0200)]
netifd: update to the latest version

85f01c44a950 bridge: check bridge port vlan membership on link-up events
17e453bd68b4 wireless: add back regular virtual interfaces on hotplug-add events as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit 2801fe6132c4e2e364e2d5a304594185351b501b)

2 months agoglibc: update to latest 2.33 HEAD (bug 28011)
Hans Dedecker [Tue, 13 Jul 2021 19:21:33 +0000 (21:21 +0200)]
glibc: update to latest 2.33 HEAD (bug 28011)

b5711025bc x86_64: Remove unneeded static PIE check for undefined weak diagnostic
edfd11197e wordexp: handle overflow in positional parameter number (bug 28011)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit 9d2dcc83128a035262bf15b8bbd1f57622465b42)

2 months agoglibc: update to latest 2.33 HEAD (BZ #27646, bug 27896, BZ #15271)
Hans Dedecker [Sun, 27 Jun 2021 13:29:25 +0000 (15:29 +0200)]
glibc: update to latest 2.33 HEAD (BZ #27646, bug 27896, BZ #15271)

58b90461ae elf: Use _dl_catch_error from base namespace in dl-libc.c [BZ #27646]
8c06748c51 Fix use of __pthread_attr_copy in mq_notify (bug 27896)
4b6be914bd Use __pthread_attr_copy in mq_notify (bug 27896)
f4cba6ca1e dlfcn: Failures after dlmopen should not terminate process [BZ #15271]

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit f033d5ad1c28e07eb6de2ce3ea8650dc7080d6d0)

2 months agodnsmasq: distinct Ubus names for multiple instances
Etan Kissling [Sun, 27 Jun 2021 22:02:46 +0000 (22:02 +0000)]
dnsmasq: distinct Ubus names for multiple instances

Currently, when using multiple dnsmasq instances they are all assigned
to the same Ubus instance name. This does not work, as only a single
instance can register with Ubus at a time. In the log, this leads to
`Cannot add object to UBus: Invalid argument` error messages.
Furthermore, upstream 3c93e8eb41952a9c91699386132d6fe83050e9be changes
behaviour so that instead of the log, dnsmasq exits at start instead.

With this patch, all dnsmasq instances are assigned unique names so that
they can register with Ubus concurrently. One of the enabled instances
is always assigned the previous default name "dnsmasq" to avoid breaking
backwards compatibility with other software relying on that default.
Previously, a random instance got assigned that name (while the others
produced error logs). Now, the first unnamed dnsmasq config section is
assigned the default name. If there are no unnamed dnsmasq sections the
first encountered named dnsmasq config section is assigned instead.

A similar issue exists for Dbus and was similarly addressed.

Signed-off-by: Etan Kissling <etan.kissling@gmail.com>
[tweaked commit message] dnsmasq was not crashing it is exiting
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit ba5bd8e556b2e7573d27b16e005ba287e066f795)

2 months agokernel: bump 5.4 to 5.4.132
Hauke Mehrtens [Sun, 18 Jul 2021 21:51:48 +0000 (23:51 +0200)]
kernel: bump 5.4 to 5.4.132

Manually rebased
  layerscape/patches-5.4/805-display-0002-drm-rockchip-prepare-common-code-for-cdns-and-rk-dpi.patch

All others updated automatically.

Compile-tested on: ramips/mt7621
Runtime-tested on: ramips/mt7621

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2 months agodnsmasq: add /tmp/hosts/ to jail_mount
Nick Hainke [Sun, 18 Jul 2021 13:32:44 +0000 (15:32 +0200)]
dnsmasq: add /tmp/hosts/ to jail_mount

Programs like the olsr-name-plugin write hostname files to "/tmp/hosts/".
If you don't add this to the jail_mount, dnsmasq can't read it anymore.

Signed-off-by: Nick Hainke <vincent@systemli.org>
(cherry picked from commit 3a94c2ca5cf7c11ca150fa3ae884e7be8d07a281)

2 months agoodhcpd: fix invalid DHCPv6 ADVERTSIE with small configured leasetime (FS#3935)
Hans Dedecker [Sun, 18 Jul 2021 17:27:57 +0000 (19:27 +0200)]
odhcpd: fix invalid DHCPv6 ADVERTSIE with small configured leasetime (FS#3935)

bc9d317 dhcpv6-ia: fix invalid preferred lifetime

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit 033d5ff25eaf4facbaab09153982e7321fe282e6)

3 months agoipq40xx: fix FRITZRepeater 1200 RGMII delay
David Bauer [Sat, 17 Jul 2021 18:04:29 +0000 (20:04 +0200)]
ipq40xx: fix FRITZRepeater 1200 RGMII delay

When the AVM FRITZ!Repeater 1200 was introduced on Kernel 4.19, the
at803x PHY driver incorrectly set up the delays, not disabling delays
set by the bootloader.

The PHY was always operating with RX as well as TX delays enabled, but
with kernel 5.4 and later, the required TX delay is disabled, breaking
ethernet operation.

Correct the PHY mode, so the driver enables both delays.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit f9d18281051c894eacd40f10c10b430c6c9082ad)

3 months agonetifd: update to the latest version
Felix Fietkau [Wed, 14 Jul 2021 13:31:41 +0000 (15:31 +0200)]
netifd: update to the latest version

7f24a063475e vlan: fix device vlan alias handling

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit d1a812c49b57636efcb9ef6f5f0aff4f11eb6b36)

3 months agompc85xx: add missing Kconfig symbols
David Bauer [Tue, 13 Jul 2021 20:18:37 +0000 (22:18 +0200)]
mpc85xx: add missing Kconfig symbols

Signed-off-by: David Bauer <mail@david-bauer.net>
3 months agonetifd: update to the latest version
Felix Fietkau [Fri, 4 Jun 2021 07:11:37 +0000 (09:11 +0200)]
netifd: update to the latest version

61a71e5e49c3 bridge: dynamically create vlans for hotplug members
cb6ee9608e10 bridge: fix dynamic delete of hotplug vlans
7f199050f395 wireless: pass the real network ifname to the setup script
50381d0a2998 bridge: allow adding/removing VLANs to configured member ports via hotplug
f12b073c0cc3 wireless: add some comments to functions
b0d090688302 bridge: fix setting pvid for updated vlans
ff3764ce28e0 device: move hotplug handling logic from system-linux.c to device.c
16bff892f415 ubus: add a dummy mode ubus call to simulate hotplug events
7f30b02013f2 examples: make dummy wireless vif names shorter
013a1171e9b0 device: do not treat devices with non-digit characters after . as vlan devices
f037b082923a wireless: handle WDS per-sta devices
db0fa24e1c17 bridge: fix enabling hotplug-added VLANs on the bridge port
4e92ea74273f bridge: bring up pre-existing vlans on hotplug as well
1f283c654aeb bridge: fix hotplug vlan overwrite on big-endian systems

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit 1236cbe30cec8e3e8246237005140596f8611ce9)

3 months agomediatek: add missing config symbols
David Bauer [Mon, 12 Jul 2021 21:24:33 +0000 (23:24 +0200)]
mediatek: add missing config symbols

Signed-off-by: David Bauer <mail@david-bauer.net>
3 months agogeneric: add missing config symbols
David Bauer [Mon, 12 Jul 2021 21:22:14 +0000 (23:22 +0200)]
generic: add missing config symbols

Signed-off-by: David Bauer <mail@david-bauer.net>
3 months agoiwinfo: move device info into -data package
Jo-Philipp Wich [Sun, 11 Jul 2021 13:59:48 +0000 (15:59 +0200)]
iwinfo: move device info into -data package

Backport upstream patch a0a0e02 ("iwinfo: rename hardware.txt to devices.txt")
and split devices.txt (former hardware.txt) into a common libiwinfo-data
package to allow different libiwinfo versions to coexist without file
clashes.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(backported from commit c13d7c82aa4cd2cbf1f61bad857cd01b795318e3)

3 months agobuild: ensure that dash isn't prepended twice to abi version suffix
Jo-Philipp Wich [Tue, 15 Jun 2021 07:54:45 +0000 (09:54 +0200)]
build: ensure that dash isn't prepended twice to abi version suffix

The ABIV_$(pkgname) variable already is formatted so return it as-is from
the GetABISuffix macro and only filter through FormatABISuffix if we read
the raw ABI version value from a version stamp file.

This ensures that binary intra-package dependencies on ABI versioned
libraries are properly formatted.

Ref: https://github.com/openwrt/packages/issues/15871
Fixes: f6a03bff5b ("build: prepend ABI suffixes with a dash if package name ends with digit")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit fbb9b1f8ed0d8a76dd989cc6c16a4e0fda2b6e74)

3 months agobuild: prepend ABI suffixes with a dash if package name ends with digit
Jo-Philipp Wich [Mon, 14 Jun 2021 12:58:37 +0000 (14:58 +0200)]
build: prepend ABI suffixes with a dash if package name ends with digit

Ensure that ABI suffixes are separated with a dash from the package name if
the name happens to end with a digit. This implementation detail got lost
during the recent refactoring of the ABI_VERSION handling in buildroot.

Ref: https://github.com/openwrt/packages/pull/14237#issuecomment-860473585
Fixes: c921650382 ("build: drop ABI version from metadata")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit f6a03bff5bccdbf9165087bccbb35095903d05c6)

3 months agoath79: add missing MTD_NAND_RB91X symbol
Koen Vandeputte [Fri, 9 Jul 2021 11:50:57 +0000 (13:50 +0200)]
ath79: add missing MTD_NAND_RB91X symbol

Looks like the symbol was forgotten for 5.4

Fixes: 820e660cd7 ("ath79: add NAND driver for MikroTik RB91xG series")
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit 52c27dab1973d523453fc1e319d8636e1cb10927)

3 months agoath79: add missing GPIO_LATCH symbol
David Bauer [Mon, 21 Jun 2021 21:50:05 +0000 (23:50 +0200)]
ath79: add missing GPIO_LATCH symbol

Fixes commit 7b8931678c36 ("ath79: add gpio-latch driver for MikroTik RouterBOARDs")

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit f2f137593eb6c0e849352e85c003c91f8be81dd1)

3 months agoath79: mikrotik: fix beeper phantom noise on RB912
Koen Vandeputte [Mon, 28 Jun 2021 08:57:21 +0000 (10:57 +0200)]
ath79: mikrotik: fix beeper phantom noise on RB912

Analysis done by Denis Kalashnikov:

It seems that some ROS versions on some routerboard models have this bug:
after silence boot (no output to uart, no beeps) beeper clicks when wireless traffic is.

https://forum.mikrotik.com/viewtopic.php?f=3&t=92269
https://forum.mikrotik.com/viewtopic.php?t=63399

From these links:

1)
Hello, I have RB951G-2HnD and I noticed strange thing
when I loaded the device with some wireless traffic it
produced strange sound - like hissing, fizzing etc.

2)
Same problem still on 6.33, with silent boot enabled
I hear buzzing noise on wireless load.

3)
The sound is fixed in v5.19, it was a bug that caused beeper to make clicks.

It also got fixed in RouterOS:

* What's new in 5.19 (2012-Jul-16 10:51):
fix ticking sound on RB411UAHL;

* What's new in 6.38.3 (2017-Feb-07 09:52):
rb3011 - fixed noise from buzzer after silent boot;

I've checked with an oscilloscope that:
* When on the ssr beeper pin is 0,
  on the beeper itself is 1 (~5V),
  and when on the ssr beeper pin is 1,
  on the beeper is 0
  The beeper doesn't consume power,
  so 1 should be a default/idle value for the ssr beeper pin).
* When there is wireless traffic (ping packets)
  in the background and the beeper clicks, I see
  pulses on the beeper itself,
  but no pulses on the ssr beeper pin (Q5 pin of 74hc595).
  When I manually toggle the ssr beeper pin I see pulses on both.
  So, it is likely that the phantom beeper clicks are caused by the EMI.

Suggested-by: Denis Kalashnikov <denis281089@gmail.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit a58bcc9e673db3c6aa39f2089d216d51c8356418)

3 months agoath79: ar934x: fix mounting issues if subpage is not supported
Koen Vandeputte [Mon, 17 May 2021 15:52:53 +0000 (17:52 +0200)]
ath79: ar934x: fix mounting issues if subpage is not supported

Currently, the option to disable subpage writing is only set
when a HW ECC engine is used.

Some boards lack a HW ECC engine and use software for that.
In this case, this NAND option does not get set when the NAND chip
does not support it, resulting in mounting errors.

Move the setting of this option to a generic init location so it
gets set for all types where required.

While at it, also OR the option instead of just setting it
so we don't overwrite potential flags being set somewhere else.

Before:

[    1.681273] UBI: auto-attach mtd2
[    1.684669] ubi0: attaching mtd2
[    1.688877] ubi0 error: validate_ec_hdr: bad VID header offset 2048, expected 512
[    1.696469] ubi0 error: validate_ec_hdr: bad EC header
[    1.701712] Erase counter header dump:
[    1.705512]  magic          0x55424923
[    1.709322]  version        1
[    1.712330]  ec             1
[    1.715331]  vid_hdr_offset 2048
[    1.718610]  data_offset    4096
[    1.721880]  image_seq      1462320675
[    1.725680]  hdr_crc        0x12255a15

After:

    1.680917] UBI: auto-attach mtd2
[    1.684308] ubi0: attaching mtd2
[    2.954504] random: crng init done
[    3.142813] ubi0: scanning is finished
[    3.163455] ubi0: attached mtd2 (name "ubi", size 124 MiB)
[    3.169069] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    3.176037] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    3.182942] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[    3.190013] ubi0: good PEBs: 992, bad PEBs: 0, corrupted PEBs: 0
[    3.196102] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
[    3.203434] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1462320675
[    3.212700] ubi0: available PEBs: 0, total reserved PEBs: 992, PEBs reserved for bad PEB handling: 20
[    3.222124] ubi0: background thread "ubi_bgt0d" started, PID 317
[    3.230246] block ubiblock0_1: created from ubi0:1(rootfs)
[    3.235819] ubiblock: device ubiblock0_1 (rootfs) set to be root filesystem
[    3.256830] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry-picked from commit 6561ca1fa510003a19ea7f8800535f12e5098ce2)

3 months agoath79: add support for MikroTik RouterBOARD 912UAG-2HPnD
Denis Kalashnikov [Thu, 27 May 2021 08:16:46 +0000 (11:16 +0300)]
ath79: add support for MikroTik RouterBOARD 912UAG-2HPnD

This board has been supported in the ar71xx.

Links:
* https://mikrotik.com/product/RB912UAG-2HPnD
* https://openwrt.org/toh/hwdata/mikrotik/mikrotik_rb912uag-2hpnd

This also supports the 5GHz flavour of the board.

Hardware:
* SoC: Atheros AR9342,
* RAM: DDR 64MB,
* SPI NOR: 64KB,
* NAND: 128MB,
* Ethernet: x1 10/100/1000 port with passive POE in,
* Wi-Fi: 802.11 b/g/n,
* PCIe,
* USB: 2.0 EHCI controller, connected to mPCIe slot and a Type-A
  port -- both can be used for LTE modem, but only one can be
  used at any time.
* LEDs: 5 general purpose LEDs (led1..led5), power LED, user LED,
  Ethernet phy LED,
* Button,
* Beeper.

Not working:
* Button: it shares gpio line 15 with NAND ALE and NAND IO7,
  and current drivers doesn't easily support this configuration,
* Beeper: it is connected to bit 5 of a serial shift register
  (tested with sysfs led trigger timer). But kmod-gpio-beeper
  doesn't work -- we left this as is for now.

Flashing:
* Use the RouterBOARD Reset button to enable TFTP netboot,
boot kernel and initramfs and then perform sysupgrade.
* From ar71xx OpenWrt firmware run:
  $ sysupgrade -F /tmp/<sysupgrade.bin>
For more info see: https://openwrt.org/toh/mikrotik/common.

Co-Developed-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Denis Kalashnikov <denis281089@gmail.com>
(cherry-picked from commit 695a1cd53ca52c678b3f837deb1bf30204285360)

3 months agoath79: add NAND driver for MikroTik RB91xG series
Denis Kalashnikov [Thu, 27 May 2021 08:16:45 +0000 (11:16 +0300)]
ath79: add NAND driver for MikroTik RB91xG series

Main part is copied from ar71xx original driver rb91x_nand
written by Gabor Juhos <juhosg@openwrt.org>.

What is done:
* Support of kernel 5.4 and 5.10,
* DTS support,
* New gpio API (gpiod_*) support.

Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Denis Kalashnikov <denis281089@gmail.com>
(cherry-picked from commit 820e660cd7463aa6d5ed9d31baf0f3c35596ce57)

3 months agoath79: add gpio-latch driver for MikroTik RouterBOARDs
Denis Kalashnikov [Thu, 27 May 2021 08:16:44 +0000 (11:16 +0300)]
ath79: add gpio-latch driver for MikroTik RouterBOARDs

This is a slighty modified version of ar71xx gpio-latch driver
written by Gabor Juhos <juhosg@openwrt.org>.

Changes:
* DTS support,
* New gpio API (gpiod_*).

Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Denis Kalashnikov <denis281089@gmail.com>
(cherry-picked from commit 7b8931678c36c8d8c333b446258a653b1358bf70)

3 months agohostapd: make wnm_sleep_mode_no_keys configurable
Timo Sigurdsson [Tue, 15 Jun 2021 21:09:41 +0000 (23:09 +0200)]
hostapd: make wnm_sleep_mode_no_keys configurable

In the aftermath of the KRACK attacks, hostapd gained an AP-side workaround
against WNM-Sleep Mode GTK/IGTK reinstallation attacks. WNM Sleep Mode is not
enabled by default on OpenWrt, but it is configurable through the option
wnm_sleep_mode. Thus, make the AP-side workaround configurable as well by
exposing the option wnm_sleep_mode_no_keys. If you use the option
wpa_disable_eapol_key_retries and have wnm_sleep_mode enabled, you might
consider using this workaround.

Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
[bump PKG_RELEASE]
Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit bf98faaac8ed24cf7d3d93dd4fcd7304d109363b)

3 months agohostapd: make country3 option configurable
Timo Sigurdsson [Tue, 15 Jun 2021 21:08:56 +0000 (23:08 +0200)]
hostapd: make country3 option configurable

The country3 option in hostapd.conf allows the third octet of the country
string to be set. It can be used e.g. to indicate indoor or outdoor use (see
hostapd.conf for further details). Make this option configurable but optional
in OpenWrt.

Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
[bump PKG_RELEASE, rebase]
Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit 9f09c1936a4a13b67fcba632f7ca02331f685359)
Signed-off-by: Paul Spooren <mail@aparcar.org>
3 months agoltq-deu: Mark lantiq DEU broken
Hauke Mehrtens [Sat, 26 Jun 2021 22:52:50 +0000 (00:52 +0200)]
ltq-deu: Mark lantiq DEU broken

When the ltq_deu_vr9 kernel module is loaded, hostapd does not start any
more. It fails with this error message:
daemon.err hostapd: nl80211: kernel reports: key addition failed
daemon.err hostapd: Interface initialization failed

OpenWrt uses the standard Linux crypto API in the wifi drivers now
and this probably makes the system offload more crypto operations to
special hardware like the Lantiq DEU. There is probably a bug in the DEU
and these operations fail and then hostapd does not start the interface.

Do not include the Lantiq DEU by default any more.

Fixes: FS#3901
Fixes: 53b6783907f3 ("mac80211: remove patches stripping down crypto support")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Notupus <notpp46@gmail.com>
(cherry-picked from commit 964863bb23999a1fae99b883053cc4f3c5c42b40)

3 months agoiwinfo: build with nl80211 backend only and make shared
Jo-Philipp Wich [Fri, 2 Jul 2021 16:04:17 +0000 (18:04 +0200)]
iwinfo: build with nl80211 backend only and make shared

Drop support for building the obsolete broadcom-wl backend and always
forcibly enable the nl82011 support. This allows us to make the package
shared again since no target specific compilation is happening anymore.

This will solve various repository coherency issues related to unavailable
libiwinfo versions in the long run.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 5a1065758b88b568a04a50189400321601904bdf)

3 months agotreewide: unmark selected packages nonshared
Petr Štetiar [Fri, 2 Jul 2021 16:00:09 +0000 (18:00 +0200)]
treewide: unmark selected packages nonshared

This partially reverts changes done in commit 72cc44958ef4 ("treewide:
mark selected packages nonshared") as it removes the nonshared flag, but
keeps the PKG_RELEASE as the PKG_RELEASE bump while adding nonshared
flag was incorrect.

Unmark uci, ubus, libubox, lua, libnl-tiny and libjson-c as nonshared
packages as this fix attempt didn't worked out. Currently the
imagebuilder is broken again:

 openwrt-imagebuilder-21.02.0-rc3-ipq40xx-generic.Linux-x86_64$ make image PROFILE=avm_fritzbox-7530 PACKAGES=luci-ssl-openssl
 ...
 Collected errors:
  * pkg_hash_check_unresolved: cannot find dependency libiwinfo20210430 for luci-mod-status
  * pkg_hash_fetch_best_installation_candidate: Packages for luci-mod-status found, but incompatible with the architectures configured
  * pkg_hash_check_unresolved: cannot find dependency libiwinfo20210430 for rpcd-mod-iwinfo
  * pkg_hash_fetch_best_installation_candidate: Packages for rpcd-mod-iwinfo found, but incompatible with the architectures configured
  * satisfy_dependencies_for: Cannot satisfy the following dependencies for luci-ssl-openssl:
  *  libiwinfo20210430
  * opkg_install_cmd: Cannot install package luci-ssl-openssl.

Everything because iwinfo's ABI was changed two times since rc3 release:

 +IWINFO_ABI_VERSION:=20210430
 +IWINFO_ABI_VERSION:=20210420

Since iwinfo is marked as nonshared, it wasn't built by phase2 builders, but
luci-mod-status was already updated 2 times since rc3 and was thus rebuilt by
phase2 builders:

 d1d452ed2fb3 luci-mod-status: don't set '-' hostname when creating static lease
 95b3633055c1 luci-mod-status: switch to html table for wlan channel analysis

So now luci-mod-status depends on libiwinfo20210430 but only
libiwinfo20210106 can be downloaded. This is first part of the fix, in
the upcoming commit Jo is going to remove nonshared flag from iwinfo
package as well.

References: https://lists.infradead.org/pipermail/openwrt-devel/2021-July/035736.html
References: https://lists.infradead.org/pipermail/openwrt-devel/2021-July/035741.html
Acked-by: Jo-Philipp Wich <jo@mein.io>
Reported-by: Nick Hainke <vincent@systemli.org>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry picked from commit 8307da3dbdaff13d5ce99f8aefa32f5b7a2e18e6)

3 months agoath10k-ct: fix typo in Makefile
Michael Yartys [Mon, 21 Jun 2021 11:37:20 +0000 (13:37 +0200)]
ath10k-ct: fix typo in Makefile

Add forgotten colon to Makefile.

Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
(cherry picked from commit f0f1d68d528402b4d51a1dd08d2e2c9034167f92)

3 months agoath10k-ct: update to latest version
Michael Yartys [Thu, 3 Jun 2021 21:50:12 +0000 (23:50 +0200)]
ath10k-ct: update to latest version

Changelog:
- ath10k-ct: Add security fixes.
- ath10k-ct: Add 5.12 kernel version.
- ath10k-ct: Fix the beacon/mcast/bcast override issue
- ath10k-ct 5.7: Fix setting mcast/bcast/beacon rate from debugfs.
- ath10k-ct: Add 5.11 driver.

Delete upstreamed patch and refresh the rest. Also, use the opportunity to
set PKG_RELEASE to $(AUTORELEASE).

Runtime-tested on ipq806x (Netgear R7800).

Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
(cherry picked from commit 2e10ed925e1e07c28570731a429efa5e7de3b826)

3 months agokernel/modules: move act_gact into kmod-sched-core
DENG Qingfang [Fri, 9 Apr 2021 04:25:08 +0000 (12:25 +0800)]
kernel/modules: move act_gact into kmod-sched-core

As the name suggests, act_gact has the generic actions such as dropping
and accepting packets, so move it into kmod-sched-core.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
(cherry-picked from commit 10aacb9a6ce3445cdee39573f4120e7888beb022)

3 months agopackage/comgt: Handle bind/unbind events
Arjun AK [Thu, 16 Jul 2020 15:52:24 +0000 (21:22 +0530)]
package/comgt: Handle bind/unbind events

This script was expecting only add/remove events which has not been the
case since Kernel 4.12 (which added bind/unbind). Bind events were getting
treated as remove events which would cause hotplugged 3g modems to not
work.

More info:
https://lkml.org/lkml/2018/12/23/128
https://github.com/systemd/systemd/issues/8221

Signed-off-by: Arjun AK <arjunak234@gmail.com>
(cherry picked from commit 89ef883b92b3a87d9ab1bd289de26b9e72681dac)

3 months agoubus: update to the latest version
Felix Fietkau [Wed, 30 Jun 2021 19:57:19 +0000 (21:57 +0200)]
ubus: update to the latest version

4fc532c8a55b ubusd: fix tx_queue linked list usage

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agobase-files: wifi: tidy up the reconf code
Bob Cantor [Thu, 24 Jun 2021 18:48:45 +0000 (04:48 +1000)]
base-files: wifi: tidy up the reconf code

commit 5edbd390d321532d9a697d6895a1a7c71c40bd5d rearranged the
"wifi up" code.

This commit tidies up the "wifi reconf" code so as to
keep it aligned with the "wifi up" code.

branches affected: trunk, 21.02

Signed-off-by: Bob Cantor <coxede6557@w3boats.com>
(cherry-picked from commit e8b54296092118fbef75de796d57799cc6c7b927)

3 months agobase-files: wifi: swap the order of some ubus calls
Bob Cantor [Thu, 24 Jun 2021 18:37:17 +0000 (04:37 +1000)]
base-files: wifi:  swap the order of some ubus calls

"/sbin/wifi up" makes three ubus calls:
1. ubus call network reload
2. ubus call network.wireless down
3. ubus call network.wireless up

The first and third ubus calls call drv_mac80211_setup,
while the second ubus call triggers wireless_device_setup_cancel,
so the call sequence becomes,

1. drv_mac80211_setup
2. wireless_device_setup_cancel
3. drv_mac80211_setup

This commit swaps the order of the first two ubus calls,
1. ubus call network.wireless down
2. ubus call network reload
3. ubus call network.wireless up

Consequently drv_mac80211_setup is only called once,
and two related bugs (#FS3784 and #FS3902) are no longer triggered
by /sbin/wifi.

branches affected: trunk, 21.02

Signed-off-by: Bob Cantor <coxede6557@w3boats.com>
(cherry-picked from commit b82cc8071366b8e96904a1b52af503442069b20d)

3 months agomac80211: print an error if wifi teardown fails
Bob Cantor [Thu, 24 Jun 2021 18:14:47 +0000 (04:14 +1000)]
mac80211: print an error if wifi teardown fails

drv_mac80211_teardown fails silently if the device to be torn down is
not defined.  This commit prints an error message.

branches affected: trunk, 21.02

Signed-off-by: Bob Cantor <coxede6557@w3boats.com>
(cherry-picked from commit 3933e29d1b87c713167cf4730b68e5f18af4f140)

3 months agomac80211: always call wireless_set_data (FS#3784)
Bob Cantor [Thu, 24 Jun 2021 18:07:34 +0000 (04:07 +1000)]
mac80211: always call wireless_set_data  (FS#3784)

When wifi is turned off, drv_mac80211_teardown sometimes fails (silently)
because the device to be torn down is not defined.

This situation arises if drv_mac80211_setup was called twice when
wifi was turned on.

This commit ensures that the device to be torn down is always defined
in drv_mac80211_teardown.

Steps to reproduce:

1) Use /sbin/wifi to turn on wifi.
   uci set wireless.@wifi-iface[0].disabled=0
   uci set wireless.@wifi-device[0].disabled=0
   uci commit
   wifi

2) Use /sbin/wifi to turn off wifi.
   uci set wireless.@wifi-device[0].disabled=1
   uci commit
   wifi

3) Observe that wifi is still up.

branches affected: trunk, 21.02

Signed-off-by: Bob Cantor <coxede6557@w3boats.com>
(cherry-picked from commit d515f6b6cde357bf480d32a7387f07ea40e85e52)

3 months agomac80211: fix no_reload logic (FS#3902)
Bob Cantor [Thu, 24 Jun 2021 17:18:33 +0000 (03:18 +1000)]
mac80211: fix no_reload logic (FS#3902)

If drv_mac80211_setup is called twice with the same wifi configuration,
then the second call returns early with error HOSTAPD_START_FAILED.
(wifi works nevertheless, despite the fact that setup is incomplete.  But
"ubus call network.wireless status" erroneously reports that radio0 is down.)

The relevant part of drv_mac80211_setup is,

if [ "$no_reload" != "0" ]; then
        add_ap=1
        ubus wait_for hostapd
        local hostapd_res="$(ubus call hostapd config_add "{\"iface\":\"$primary_ap\", \"config\":\"${hostapd_conf_file}\"}")"
        ret="$?"
        [ "$ret" != 0 -o -z "$hostapd_res" ] && {
                wireless_setup_failed HOSTAPD_START_FAILED
                return
        }
        wireless_add_process "$(jsonfilter -s "$hostapd_res" -l 1 -e @.pid)" "/usr/sbin/hostapd" 1 1
fi

This commit sets no_reload = 0 during the second call of drv_mac80211_setup.

It is perhaps worth providing a way to reproduce the situation
where drv_mac80211_setup is called twice.

When /sbin/wifi is used to turn on wifi,
   uci set wireless.@wifi-iface[0].disabled=0
   uci set wireless.@wifi-device[0].disabled=0
   uci commit
   wifi

/sbin/wifi makes the following ubus calls,
   ubus call network reload
   ubus call network.wireless down
   ubus call network.wireless up

The first and third ubus calls both call drv_mac80211_setup,
while the second ubus call triggers wireless_device_setup_cancel.
So the call sequence becomes,

   drv_mac80211_setup
   wireless_device_setup_cancel
   drv_mac80211_setup

In contrast, when LuCI is used to turn on wifi only a single call
is made to drv_mac80211_setup.

branches affected: trunk, 21.02

Signed-off-by: Bob Cantor <coxede6557@w3boats.com>
(cherry-picked from commit a29ab3b79affb62fda82e0825ed811eaf482dd3c)

3 months agomac80211: backport fix for nl80211 control port tx (fixes FS#3857)
Felix Fietkau [Wed, 30 Jun 2021 17:08:59 +0000 (19:08 +0200)]
mac80211: backport fix for nl80211 control port tx (fixes FS#3857)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit de499573006ab4f32ded9fd66a62ec5e0c183e8a)

3 months agomac80211: add support for 802.3 encap offload with software rate control
Felix Fietkau [Sun, 6 Jun 2021 18:58:33 +0000 (20:58 +0200)]
mac80211: add support for 802.3 encap offload with software rate control

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit f2c6d892cacb5d884bdd638bc7574c1ee98514a5)

3 months agomac80211: improve rate control performance
Felix Fietkau [Sun, 6 Jun 2021 18:57:39 +0000 (20:57 +0200)]
mac80211: improve rate control performance

Call rate control handler after intermediate queueuing
Includes follow-up fixes

Signed-off-by: Felix Fietkau <nbd@nbd.name>
cherry-picked from commits:
7dd8829ef915f1c5fc728be8f8360c61ddaadf1b
a603e82dd342680d584c4eb5f1b222e056379890
8bb4437c01ca35a5ac67e391630a1b24cb52dbb7

3 months agobusybox: sysntpd: add trigger to reload server
Alexey Dobrovolsky [Sat, 5 Jun 2021 23:25:02 +0000 (02:25 +0300)]
busybox: sysntpd: add trigger to reload server

sysntpd server becomes unavailable if the index of the bound
interface changes. So let's add an interface trigger to reload sysntpd.

This patch also adds the ability for the sysntpd script to handle
uci interface name from configuration.

Fixes: 4da60500ebd2 ("busybox: sysntpd: option to bind server to iface")
Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit 88114f617ae7bffe13d19d7b9575659a3d3cd9b6)

3 months agobusybox: sysntpd: option to bind server to iface
Alexey Dobrovolsky [Tue, 23 Feb 2021 14:43:02 +0000 (17:43 +0300)]
busybox: sysntpd: option to bind server to iface

NTPD in busybox has option -I to bind server to IFACE.
However, capabilities of the busybox are limited, the -I option cannot be
repeated and only one interface can be effectively specified in it.
This option is currently not configurable via UCI.
The patch adds an interface option to the system config, ntp section.
Also sort options for uci_load_validate alphabetically.

Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
(cherry picked from commit e12fcf0fe5597467f7cc21144e5f4da60500ebd2)

3 months agoiwinfo: update to latest Git HEAD
David Bauer [Sat, 1 May 2021 22:22:56 +0000 (00:22 +0200)]
iwinfo: update to latest Git HEAD

c45f0b5 iwinfo: add 802.11ax HE rate information

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 5515c29029ce7c63b48d1af0cbb3fbdc14ca033b)

3 months agoiwinfo: update to latest Git HEAD
David Bauer [Mon, 12 Apr 2021 22:13:33 +0000 (00:13 +0200)]
iwinfo: update to latest Git HEAD

50b64a6 iwinfo: add basic IEEE 802.11ax support
70d2136 iwinfo: nl80211: perform split wiphy dump
cd23727 iwinfo: cli: fix hwmode formatting

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 6f77ce77248d6458414efafd64c72d653fc70bb8)

3 months agokernel: bump 5.4 to 5.4.128
Hauke Mehrtens [Sat, 26 Jun 2021 19:08:19 +0000 (21:08 +0200)]
kernel: bump 5.4 to 5.4.128

Manually rebased
  bcm27xx/patches-5.4/950-0089-cgroup-Disable-cgroup-memory-by-default.patch
    Replaced with patch from Raspberry Pi kernel 5.10 patches
  mvebu/patches-5.4/002-PCI-aardvark-Don-t-rely-on-jiffies-while-holding-spi.patch
    Applied upstream

All others updated automatically.

Compile-tested on: ath79/generic, lantiq/xrx200, brcm27xx
Runtime-tested on: ath79/generic, lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 months agolibusb: Fix parsing of descriptors for multi-configuration devices
Georgi Valkov [Wed, 3 Feb 2021 07:41:54 +0000 (09:41 +0200)]
libusb: Fix parsing of descriptors for multi-configuration devices

Prerequisite patch:
Correct a typo in the Changelog and clean up a stray file

Fix changes in libusb which introduced a regression:
Commit e2be556bd2 ("linux_usbfs: Parse config descriptors during device
initialization") introduced a regression for devices with multiple
configurations. The logic that verifies the reported length of the
configuration descriptors failed to count the length of the
configuration descriptor itself and would truncate the actual length by
9 bytes, leading to a parsing error for subsequent descriptors.

Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
(cherry picked from commit 4b37e3bc2b2a079c996b6d97b8d3dbbd4ba6eb62)

3 months agobase-files: fix /tmp/TZ when zoneinfo not installed
Paul Spooren [Thu, 24 Jun 2021 17:42:53 +0000 (07:42 -1000)]
base-files: fix /tmp/TZ when zoneinfo not installed

The zoneinfo packages are not installed per default so neither
/tmp/localtime nor /tmp/TZ is generated.

This patch mostly reverts the previous fix and instead incooperates a
solution suggested by Jo.

Fixes "base-files: fix zoneinfo support " 8af62ed

Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit 56bdb6bb9781f8a0bbec5fc3075b9d2b8d12f9a8)

3 months agobase-files: fix zoneinfo support
Rosen Penev [Sat, 10 Apr 2021 00:22:48 +0000 (17:22 -0700)]
base-files: fix zoneinfo support

The system init script currently sets /tmp/localinfo when zoneinfo is
populated. However, zoneinfo has spaces in it whereas the actual files
have _ instead of spaces. This made the if condition never return true.

Example failure when removing the if condition:

/tmp/localtime -> /usr/share/zoneinfo/America/Los Angeles

This file does not exist. America/Los_Angeles does.

Ran through shfmt -w -ci -bn -sr -s

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 8af62ede189aa504135db05474d34c9f8a1ed35d)

3 months agoexfat: update to 5.12.3
Rosen Penev [Sun, 13 Jun 2021 04:26:17 +0000 (21:26 -0700)]
exfat: update to 5.12.3

Major changes are:
    Avoid page allocation failure from upcase table allocation.
    Add support for FITRIM.
    Improve write perofmrance on dirsync mount.
    Improve lookup perofmrance.
    Fix a bug on discard mount.

Switch to AUTORELEASE to avoid having to bump it.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
3 months agorealtek: Fix failsafe mode
Hauke Mehrtens [Mon, 21 Jun 2021 22:45:21 +0000 (00:45 +0200)]
realtek: Fix failsafe mode

The RTL8380-RTL9300 switches only forward packets when VLAN ID 1 is
configured. Do not use the standard failsafe configuration for DSA
accessing the default port directly, but configure a switch on the lan1
interface instead.

This will add the VLAN ID 1 configuration to the switch:
$ bridge vlan show
port              vlan-id
lan1              1 PVID Egress Untagged
switch            1 PVID Egress Untagged

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit b7ee0786b56d1088c195fe7c1cdb1ad7d20c9245)

3 months agobase-files: failsafe: Remove the VLAN modifier from interface name
Hauke Mehrtens [Mon, 21 Jun 2021 22:45:20 +0000 (00:45 +0200)]
base-files: failsafe: Remove the VLAN modifier from interface name

Some interfaces have a VLAN modifier like :t in lan1:t, this modifier
should be removed from the interface before calling preinit_ip_config().

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 790561d5109ef81537fdb8ceb8eb183c0cab077c)

3 months agobase-files: failsafe: Fix IP configuration
Hauke Mehrtens [Mon, 21 Jun 2021 22:45:19 +0000 (00:45 +0200)]
base-files: failsafe: Fix IP configuration

Adapt the preinit_config_board() to the board.json network changes. It
now looks for the device and the ports variables to configure the LAN
network.

This works with swconfig configurations.

Fixes: FS#3866
Fixes: d42640e389a8 ("base-files: use "ports" array in board.json network for bridges")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 467cd378db3359814866ec4121fdb4417783241e)

3 months agokernel: Backport patch to automatically bring up DSA master when opening user port
Hauke Mehrtens [Mon, 21 Jun 2021 22:45:18 +0000 (00:45 +0200)]
kernel: Backport patch to automatically bring up DSA master when opening user port

Without this patch we have to manually bring up the CPU interface in
failsafe mode.

This was backported from kernel 5.12.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 2e17c710954bd3506467d700dee23757b138fedd)

3 months agokernel-5.4: backport latest patches for wireguard
Jason A. Donenfeld [Sun, 6 Jun 2021 10:37:53 +0000 (12:37 +0200)]
kernel-5.4: backport latest patches for wireguard

These are the latest patches that just landed upstream for 5.13, will be
backported by Greg into 5.10 (because of stable@), and are now in the
5.4 backport branch of wireguard: https://git.zx2c4.com/wireguard-linux/log/?h=backport-5.4.y

Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Stijn Segers <foss@volatilesystems.org>
(cherry picked from commit 2a3b2f59fec10d7c08f90f019b310db418e775bf)

3 months agohostapd: fix handling of the channel utilization options
Timo Sigurdsson [Tue, 15 Jun 2021 21:12:08 +0000 (23:12 +0200)]
hostapd: fix handling of the channel utilization options

Commit 0a7657c ("hostapd: add channel utilization as config option") added the
two new uci options bss_load_update_period and chan_util_avg_period. However,
the corresponding "config_add_int" calls for these options weren't added, so
attempting to actually use these options and change their values is bound to
fail - they always stay at their defaults. Add the missing code to actually
make these options work.

Fixes: 0a7657c ("hostapd: add channel utilization as config option")
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
(cherry picked from commit 85ce590705072be78c3ef7dc6b64e3b1facc892b)

3 months agobcm4908: fix Ethernet broken state after interface restart
Rafał Miłecki [Tue, 22 Jun 2021 05:47:18 +0000 (07:47 +0200)]
bcm4908: fix Ethernet broken state after interface restart

This fixes traffic stalls after ifdown & ifup.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit f8d5bd20b31842ef7fdb740d27c70294f21c6124)

3 months agobcm4908: add kmod-gpio-button-hotplug
Rafał Miłecki [Mon, 21 Jun 2021 06:49:03 +0000 (08:49 +0200)]
bcm4908: add kmod-gpio-button-hotplug

All bcm4908 devices are expected to have GPIO buttons to make relevant
package selected by default.
This "fixes" triggering failsafe mode.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit fcfa60408c37a129b143e4928b6d86e383c2c8f6)

3 months agobase-files: fix typo in config_generate MAC check
Rafał Miłecki [Mon, 14 Jun 2021 20:29:49 +0000 (22:29 +0200)]
base-files: fix typo in config_generate MAC check

Fixes: 125deb4d783e ("base-files: set MAC for bridge ports (devices) instead of bridge itself")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 946019637ec9192450c685a61c589a9cbef7637b)

3 months agobase-files: set MAC for bridge ports (devices) instead of bridge itself
Rafał Miłecki [Mon, 14 Jun 2021 18:18:14 +0000 (20:18 +0200)]
base-files: set MAC for bridge ports (devices) instead of bridge itself

This restores the original config_generate behaviour. With MAC set for
bridged devices the bridge automatically gets its MAC adjusted (it picks
the lowest MAC of bridged devices).

This fixes confusing interfaces setup (bridge ports not having custom
MAC assigned).

Reported-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Fixes: c2139eef279e ("base-files: simplify setting device MAC")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit c8d8eb9d13fc6fc8b394a620c27995ee71d29c4d)

3 months agohostapd: wolfssl: add RNG to EC key
David Bauer [Wed, 5 May 2021 23:53:49 +0000 (01:53 +0200)]
hostapd: wolfssl: add RNG to EC key

Since upstream commit 6467de5a8840 ("Randomize z ordinates in
scalar mult when timing resistant") WolfSSL requires a RNG for
the EC key when built hardened which is the default.

Set the RNG for the EC key to fix connections for OWE clients.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit ddcb970274c011d3db611ec39350ee4704ff0e02)

3 months agowolfssl: always export wc_ecc_set_rng
David Bauer [Wed, 5 May 2021 23:48:04 +0000 (01:48 +0200)]
wolfssl: always export wc_ecc_set_rng

Since commit 6467de5a8840 ("Randomize z ordinates in scalar
mult when timing resistant") wolfssl requires a RNG for an EC
key when the hardened built option is selected.

wc_ecc_set_rng is only available when built hardened, so there
is no safe way to install the RNG to the key regardless whether
or not wolfssl is compiled hardened.

Always export wc_ecc_set_rng so tools such as hostapd can install
RNG regardless of the built settings for wolfssl.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit ef9b103107aebd1a54f4360af3d9cf28d0544f13)

3 months agoath79: don't autodetect AR8033 PHY capabilities
David Bauer [Sun, 13 Jun 2021 10:00:41 +0000 (12:00 +0200)]
ath79: don't autodetect AR8033 PHY capabilities

PHY capabilities are currently read from the fiber status page, thus
Linux won't advertise 10 / 100 Base-T operation modes, effectively
limiting operation to 1000 Base-T.

Statically set the PHYs capabilities, avoiding autodetection.

The issue itself is properly fixed kernel upstream, however backporting
efforts to OpenWrt master resulted in breaking the fiber operation for
another target.

This is currently only known to be necessary for the Ubiquiti
UniFi AC series, so enabling it in the ath79 target should not
break somewhere else.

Signed-off-by: David Bauer <mail@david-bauer.net>
3 months agobuild,json: fix generation with empty profiles
Paul Spooren [Mon, 21 Jun 2021 06:23:45 +0000 (20:23 -1000)]
build,json: fix generation with empty profiles

If the image generation doesn't add any profiles to the output the
*profile merge* will fail. To avoid that set an empty profile as
fallback.

Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit fd0d9909bf50f114d5e7f7cedf53e542de878a2c)

3 months agobuild: preserve profiles.json between builds
Moritz Warning [Sun, 21 Feb 2021 23:18:10 +0000 (00:18 +0100)]
build: preserve profiles.json between builds

Keep other profiles.json content if the data belongs to the current
build version.

Also useful for the ImageBuilder, which builds for a single model each
time. Without this commit the profiles.json would only contain the
latest build profile information.

Signed-off-by: Moritz Warning <moritzwarning@web.de>
[improve commit message]
Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit a463b96241fbc2d142982387eaed9989e201ac7a)

3 months agoqos-scripts: add ifbN device before setting the link up
Perry Melange [Mon, 19 Apr 2021 09:17:10 +0000 (11:17 +0200)]
qos-scripts: add ifbN device before setting the link up

commit 50413e1ec83dedaea44558d5f37af5454156a46a replaced ifconfig
with ip.  In order to set a link state to up, the interface needs
to be added first.

Fixes: FS#3754

Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com>
[Add Fixes tag]
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
(cherry picked from commit 23c3bab9209f984692f8206c0d97758ee223a26f)

3 months agomac80211: fix an issue with wds links on 802.11ax devices
Felix Fietkau [Sat, 19 Jun 2021 10:16:49 +0000 (12:16 +0200)]
mac80211: fix an issue with wds links on 802.11ax devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit 89c9ccc3b241d8f07c22a1c271211322c4703f7b)

3 months agoath79: use dynamic partitioning for TP-Link CPE series
Michael Pratt [Wed, 5 May 2021 03:32:00 +0000 (23:32 -0400)]
ath79: use dynamic partitioning for TP-Link CPE series

CPExxx and WBSxxx boards with AR9344 SOC
use the OKLI lzma kernel loader
with the offset of 3 blocks of length 4k (0x3000)
in order to have a fake "kernel" that cannot grow larger
than how it is defined in the now static OEM partition table.

Before recent changes to the mtdsplit driver,
the uImage parser for OKLI only supported images
that started exactly on an eraseblock boundary.

The mtdsplit parser for uImage now supports identifying images
with any magic number value
and at any offset from the eraseblock boundary
using DTS properties to define those values.

So, it is no longer necessary to use fixed sizes
for kernel and rootfs

Tested-by: Andrew Cameron <apcameron@softhome.net> [CPE510 v2]
Tested-by: Bernhard Geier <freifunk@geierb.de> [WBS210 v2]
Tested-by: Petrov <d7c48mWsPKx67w2@gmail.com> [CPE210 v1]
Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit 7b9a0c264cb9dc2c5a946a0aa9a290427a5e559c)

3 months agomac80211: fix minstrel sample time check
Felix Fietkau [Thu, 17 Jun 2021 10:40:15 +0000 (12:40 +0200)]
mac80211: fix minstrel sample time check

We need to skip sampling if the next sample time is after jiffies, not before.
This patch fixes an issue where in some cases only very little sampling (or none
at all) is performed, leading to really bad data rates

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agoiw: update to 8fab0c9e
Andre Heider [Tue, 18 May 2021 05:13:50 +0000 (07:13 +0200)]
iw: update to 8fab0c9e

This fixes `iw dev wlan0-mesh station dump`.

8fab0c9 iw: fix ftm_request missing arguments segfault
e816fbc iw: fix mgmt dump missing arguments segfault
5d9d1b8 iw: Fix timestamp output on 32-bit architectures
4b25ae3 iw: fix pointer arithmetic in __print_he_capa
c3df363 iw: add option to print human readable event time
cd64525 iw: print ctrl port tx status event
0ba98b9 iw: use correct type in policy check for mesh
9e38dee iw: scan: fixup HE caps whitespace
17e8564 iw: scan: parse HE capabilities
5735e58 iw: util: factor out HE capability parser
6d8d507 iw: scan: add extension tag parsing
b4e1ec4 man: update wikipage URL, reformat SEE ALSO section
c56036a iw: enable 80MHz support for 6GHz band 11s mesh
fa72728 iw: handle positive error codes gracefully
7ba9093 iw: scan: add flag for scanning colocated ap
5ec60ed iw: Add 'coloc' and 'flush' options to sched_scan
f8ade75 iw: update wikipage URL
b6f2dac iw: Add support for specifying the 160MHz bandwidth when setting the channel/frequency

Signed-off-by: Andre Heider <a.heider@gmail.com>
(cherry-picked from commit b5420dd710aaad703f6f7a900840609d4d1176a1)

3 months agomt76: update to the latest version
Felix Fietkau [Wed, 2 Jun 2021 06:49:19 +0000 (08:49 +0200)]
mt76: update to the latest version

bddc1db76d0f mt76: mt7915: drop the use of repeater entries for station interfaces
3c90f35dddac mt76: mt7915: add thermal sensor device support
afab0e8202ff mt76: mt7915: add thermal cooling device support
41cf02184699 mt76: mt7615: add thermal sensor device support
2ac6b8762565 mt76: connac: update BA win size in Rx direction
ddb301127291 mt76: mt7921: fix reset under the deep sleep is enabled
e4cbefd1d69a mt76: mt7921: avoid unnecessary consecutive WiFi resets
393eea2034d7 mt76: mt7921: fix invalid register access in wake_work
a15d46407ffa mt76: mt7921: fix OMAC idx usage
e4d267d8e900 mt76: mt7921: enable runtime pm by default
50fd8ce2412a mt76: connac: add bss color support for sta mode
e29058c3c860 mt76: mt7921: return proper error value in mt7921_mac_init
c89c8c347b1e mt76: mt7921: do not schedule hw reset if the device is not running
9f7bb428e587 mt76: mt7921: reset wfsys during hw probe
22ea365913b5 mt76: mt7915: add .offset_tsf callback
ad91f8e8e494 mt76: mt7615: add .offset_tsf callback
6f871f35e3c1 mt76: mt7915: use mt7915_mcu_get_txpower_sku() to get per-rate txpower
597b68b7daa3 mt76: mt7615: remove useless if condition in mt7615_add_interface()
3945264468eb mt76: testmode: fix memory leak in mt76_testmode_alloc_skb
bdcc57a11606 mt76: testmode: remove unnecessary function calls in mt76_testmode_free_skb
a9763452601d mt76: testmode: remove undefined behaviour in mt76_testmode_alloc_skb
4aef2a2be464 mt76: mt7615: fix potential overflow on large shift
d9dd7635b055 mt76: mt7915: use mt7915_mcu_get_mib_info() to get survey data
d740e921758a mt76: mt7921: introduce mac tx done handling
259ddfc7cb73 mt76: mt7921: update statistic in active mode only
757b93f4b179 mt76: mt7921: remove leftover 80+80 HE capability
1fcff599b2e1 mt76: allow hw driver code to overwrite wiphy interface_modes
c55c22e39b7d mt7915: update firmware to 2020110522
10548aef1f45 mt76: mt7915: improve error recovery reliability
ed6b0c79820c mt76: mt7921: set MT76_RESET during mac reset
321443258bea mt76: move mt76_rates in mt76 module
d1652e8af9e1 Revert "mt76: connac: do not schedule wake_work if the runtime-pm is disabled"
4f4cab39ed9f mt76: mt7915: read all eeprom fields from fw in efuse mode
71450535f164 mt76: mt7921: enable hw offloading for wep keys
833d577e430c mt76: mt7921: remove mt7921_get_wtbl_info routine
67b7a22d2b99 mt76: mt7921: enable random mac address during sched_scan
cf1ff7bf4f1b mt76: mt7915: setup drr group for peers
ef2f7aa8745f mt76: mt7615: update radar parameters
b9f09f530223 mt76: mt7915: fix MT_EE_CAL_GROUP_SIZE
22b690334c0f mt76: mt7915: do not fail if the cooling device could not be registered

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit 3c46ba053d899df65dc07e373c64d1925d30f88e)

3 months agomac80211: sync nl80211.h with upstream and backport a WPA3 related commit
Felix Fietkau [Wed, 26 May 2021 18:00:14 +0000 (20:00 +0200)]
mac80211: sync nl80211.h with upstream and backport a WPA3 related commit

Fixes compatibility issues with the latest hostapd update

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commit 91abeebd3bd29a98de516e49260d61165096009a)

4 months agougps: start also in case device is absent
Daniel Golle [Thu, 27 May 2021 10:34:38 +0000 (12:34 +0200)]
ugps: start also in case device is absent

Don't bail out from init script in case the GPS device is missing.
Some modems take time to come up, and some people may use things like
'kplex' to feed ugpsd. Hence it is better to always start ugpsd
unconditionally and let procd's respawn take care of retrying.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 3d026d24257a0e2f3170538d8a54d520315699a1)

4 months agougps: update to git HEAD
Daniel Golle [Mon, 7 Jun 2021 22:13:18 +0000 (23:13 +0100)]
ugps: update to git HEAD

 86ee86e nmea: parse $GPZDA sentences for date/time
 8e12414 nmea: parse $GPGLL sentences for position
 5e88403 ubus: display only available information

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 3a8b75b56927d679dbf1a86827ceffef35207281)

4 months agoOpenWrt v21.02.0-rc3: revert to branch defaults
Hauke Mehrtens [Mon, 14 Jun 2021 18:33:17 +0000 (20:33 +0200)]
OpenWrt v21.02.0-rc3: revert to branch defaults

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 months agoOpenWrt v21.02.0-rc3: adjust config defaults v21.02.0-rc3
Hauke Mehrtens [Mon, 14 Jun 2021 18:33:04 +0000 (20:33 +0200)]
OpenWrt v21.02.0-rc3: adjust config defaults

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 months agoopkg: update to git HEAD
Hauke Mehrtens [Sun, 13 Jun 2021 21:43:36 +0000 (23:43 +0200)]
opkg: update to git HEAD

 1bf042d libopkg: pkg_hash: print unresolved dependencies

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit da86064611db657bce8c3c96b2e58eca8551c3d0)

4 months agotreewide: mark selected packages nonshared
Hannu Nyman [Sun, 6 Jun 2021 15:15:08 +0000 (18:15 +0300)]
treewide: mark selected packages nonshared

Mark uci, ubus, libubox, lua, libnl-tiny and libjson-c
as nonshared packages. This helps to keep coherent dependencies
if these ABI versioned packages are later updated.

Before this commit it is possible to get missing dependencies
in target-specific nonshared packages (like iwinfo) that depend
on these shared ABI versioned packages. If these are later updated
and rebuilt, only the new ABI version will be available for download,
while the target-specific packages in releases continue to depend on
the old ABI version.

After this commit the packages are built along the other nonshared
packages by the phase1 images buildbot and will be available at the
target/ download directories instead of packages/base dir. That will
help to keep a coherent set available.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(cherry picked from commit 72cc44958ef4e0df1a152178514c92899d6a957a)

4 months agoREADME: switch from freenode to oftc
Paul Spooren [Sat, 12 Jun 2021 22:38:30 +0000 (12:38 -1000)]
README: switch from freenode to oftc

We recently switched from freenode.net to oftc.net, reflect that in the
README and update the links.

Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit 5a66165cb1863693ce7901d153f5e41c91a130e1)

4 months agoREADME: update routing.git URL
Paul Spooren [Sat, 12 Jun 2021 18:27:16 +0000 (08:27 -1000)]
README: update routing.git URL

The routing packages feed moved from `openwrt-routing/packages` to
`openwrt/routing`, reflect that in the README.

Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit 0371f401933e8b24ba6add2689098474774d04d6)

4 months agoramips: mt7620: add kernel size for Jboot devices
Pawel Dembicki [Wed, 9 Jun 2021 10:22:39 +0000 (12:22 +0200)]
ramips: mt7620: add kernel size for Jboot devices

Since few months multiple users reported problems with various JBoot
devices. [0][1][2][3] All of them was bricked.

On my Lava LR-25G001 it freezes with current snapshot:

CDW57CAM_003 Jboot B695
Giga Switch AR8327 init
AR8327/AR8337 id   ==> 0x1302
JRecovery Version R1.2 2014/04/01 18:25
SPI FLASH: MX25l12805d 16M
.
.
(freeze)

The kernel size is >2048k.

I built current master with minimal config and it boots well:

CDW57CAM_003 Jboot B695
Giga Switch AR8327 init
AR8327/AR8337 id   ==> 0x1302
JRecovery Version R1.2 2014/04/01 18:25
SPI FLASH: MX25l12805d 16M
.
...........................
Starting kernel @80000000...
[    0.000000] Linux version 5.4.124

Kernel size is <2048k.

Jboot bootloader isn't open source, so it's impossible to find
solution in code. It looks, that some buffer for kernel have 2MB size.

To avoid bricked devices, this commit introduces 2048k limit kernel
size for all jboot routers.

[0] https://bugs.openwrt.org/index.php?do=details&task_id=3539
[1] https://eko.one.pl/forum/viewtopic.php?pid=254344
[2] https://eko.one.pl/forum/viewtopic.php?id=20930
[3] https://eko.one.pl/forum/viewtopic.php?pid=241376#p241376

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[remove Fixes:]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit e1d8a14cd0a9f8844f9ebb8ca220780b0ce5d6db)

4 months agoramips: fix LAN LED trigger assignment for Xiaomi Router 3 Pro
Adam Elyas [Tue, 8 Jun 2021 00:09:18 +0000 (08:09 +0800)]
ramips: fix LAN LED trigger assignment for Xiaomi Router 3 Pro

The default trigger for the amber lights on lan1 and lan3 were
mistakenly swapped after the device's migration to DSA. This
caused activity on one port to trigger the amber light on the
other port. Swapping their default trigger in the DTS file
fixes that.

Signed-off-by: Adam Elyas <adamelyas@outlook.com>
[minor commit title adjustment, wrap commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit edaf432bf411767f3e8a9e5effc3a416bcac46c7)

4 months agoramips: fix Ethernet random MAC address for HILINK HLK-7628N
Liu Yu [Tue, 8 Jun 2021 01:50:02 +0000 (09:50 +0800)]
ramips: fix Ethernet random MAC address for HILINK HLK-7628N

Set the ethernet address from flash.

MAC addresses as verified by OEM firmware:

  use   interface  source
  2g    wlan0      factory 0x04 (label)
  LAN   eth0.1     factory 0x28 (label+1)
  WAN   eth0.2     factory 0x2e (label+2)

Fixes: 671c9d16e382 ("ramips: add support for HILINK HLK-7628N")

Signed-off-by: Liu Yu <f78fk@live.com>
[drop old MAC address setup from 02_network, cut out state_default
changes, face-lift commit message, add Fixes:]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit ae9c5cd37bf5c08452f314b54afa963a00bdde30)

4 months agoath79: fix eth0 PLL registers on WD My Net Wi-Fi Range Extender
Jonathan A. Kollasch [Fri, 11 Sep 2020 19:33:39 +0000 (14:33 -0500)]
ath79: fix eth0 PLL registers on WD My Net Wi-Fi Range Extender

This replaces the register bits for RGMII delay on the MAC side in favor
of having the RGMII delay on the PHY side by setting the phy-mode
property to rgmii-id (RGMII internal delay), which is supported by the
at803x driver.  Speed 1000 is fixed as a result, so now all ethernet
speeds function.

Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Reviewed-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit f36990eae77c3a22842a2c418378c5dd40dec366)

4 months agoRevert "ci: build test ath79/generic"
Petr Štetiar [Fri, 11 Jun 2021 07:04:59 +0000 (09:04 +0200)]
Revert "ci: build test ath79/generic"

This reverts commit 16d6288c6337dc30ed03e3566aa593225945f4e7 which was
accidentally commited.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 months agoci: build test ath79/generic
Petr Štetiar [Tue, 8 Jun 2021 06:33:04 +0000 (08:33 +0200)]
ci: build test ath79/generic

Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 months agoath79: set lzma-loader variables to null by default
Michael Pratt [Sat, 8 May 2021 21:34:30 +0000 (17:34 -0400)]
ath79: set lzma-loader variables to null by default

This fixes a small regression where the lzma-loader variable values
are being shared between boards that require different configurations.

If not set to "" globally, a device without these settings will just take
the last values another device has set before in the queue.

Fixes: 1b8bd17c2d07 ("ath79: lzma-loader: allow setting custom kernel magic")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
[add detailed explanation to the commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit bf8c16dfa2cddd529f889510ca5fa5160606c325)

4 months agoath79: move pcie node to DTSI for qca955x Senao APs
Michael Pratt [Sat, 27 Feb 2021 19:18:42 +0000 (14:18 -0500)]
ath79: move pcie node to DTSI for qca955x Senao APs

pcie0 is the same for this generation of Senao APs
while eth0, eth1, and wmac can differ

the qca,no-eeprom property has no effect
for the ath10k drivers

Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit 15c599c9dfa9cf5459bcc15b773e39891ca14340)

4 months agoath79: cleanup DTS for ALLNET ALL-WAP02860AC
Michael Pratt [Mon, 15 Feb 2021 20:37:06 +0000 (15:37 -0500)]
ath79: cleanup DTS for ALLNET ALL-WAP02860AC

use qca955x_senao_loader.dtsi
because it is the same hardware / partitioning
and some cleanup

Effects:

nodes to match similar boards
 - keys
 - eth0
 - pcie0

bumps SPI frequency to 40 MHz

removes &pll node:
the property is defined in qca955x.dtsi

removes qca,no-eeprom:
has no effect with mtd-cal-data property
(also spelling)

Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit e800da9d5c87d276806284cf2183994ea7fe083e)

4 months agoath79: add factory.bin for ALLNET ALL-WAP02860AC
Michael Pratt [Fri, 12 Feb 2021 23:58:00 +0000 (18:58 -0500)]
ath79: add factory.bin for ALLNET ALL-WAP02860AC

This device is a Senao-based product
using hardware and software from Senao
with the tar-gz platform for factory.bin
and checksum verification at boot time
using variables stored in uboot environment
and a 'failsafe' image when it fails.

Extremely similar hardware/software to Engenius EAP1200H
and other Engenius APs with qca955x

Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit 37ea5d9a658a15783b0ac68583db9e67a43e960d)

4 months agoath79: add Senao 'failsafe' sysupgrade procedure
Michael Pratt [Fri, 12 Feb 2021 23:19:10 +0000 (18:19 -0500)]
ath79: add Senao 'failsafe' sysupgrade procedure

Use a similar upgrade method for sysupgrade.bin, like factory.bin,
for Senao boards with the tar.gz OEM upgrade platform,
and 'failsafe' image which is loaded on checksum failure.

This is inspired by the OEM upgrade script /etc/fwupgrade.sh
and the existing platforms for dual-boot Senao boards.

Previously, if the real kernel was damaged or missing
the only way to recover was with UART serial console,
because the OKLI lzma-loader is programmed to halt.

uboot did not detect cases where kernel or rootfs is damaged
and boots OKLI instead of the failsafe image,
because the checksums stored in uboot environment
did not include the real kernel and rootfs space.

Now, the stored checksums include the space for both
the lzma-loader, kernel, and rootfs.
Therefore, these boards are now practically unbrickable.

Also, the factory.bin and sysupgrade.bin are now the same,
except for image metadata.
This allows for flashing OEM image directly from openwrt
as well as flashing openwrt image directly from OEM.

Make 'loader' partition writable so that it can be updated
during a sysupgrade.

tested with
ENS202EXT v1
EAP1200H
EAP350 v1
EAP600
ECB350 v1
ECB600
ENH202 v1

Signed-off-by: Michael Pratt <mcpratt@pm.me>
(cherry picked from commit d5035f0d2694cb9c5a93ed72e3b6d2dd1770741e)