Rafał Miłecki [Wed, 11 Feb 2015 18:11:22 +0000 (18:11 +0000)]
kernel: fix bgmac check for chip ID
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44411
Rafał Miłecki [Wed, 11 Feb 2015 17:35:09 +0000 (17:35 +0000)]
kernel: backport mainlined bgmac patches from 3.19
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44410
Jo-Philipp Wich [Wed, 11 Feb 2015 15:12:32 +0000 (15:12 +0000)]
base-files: fix target/subtarget value in /etc/openwrt_release
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44409
Rafał Miłecki [Wed, 11 Feb 2015 14:41:07 +0000 (14:41 +0000)]
bcm53xx: use bcm47xx_wdt for restarting device
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44408
John Crispin [Wed, 11 Feb 2015 13:50:56 +0000 (13:50 +0000)]
oxnas: disable usbgadget support
usbgadget was initially enabled in the hope to support gadget mode
as it seems to be supported by the hardware.
However, it currently breaks things and doesn't work anyway, so
remove the usbgadget feature.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44407
John Crispin [Wed, 11 Feb 2015 13:50:40 +0000 (13:50 +0000)]
brcm2708-gpu-fw: revert to github releases, adapt to bcm2708 target changes and add back InstallDev
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44406
John Crispin [Wed, 11 Feb 2015 13:09:39 +0000 (13:09 +0000)]
brcm2708: add missing SUBTARGETS:= to makefile
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44405
John Crispin [Wed, 11 Feb 2015 13:05:37 +0000 (13:05 +0000)]
brcm2708: remove CMA_DEBUG
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44404
John Crispin [Wed, 11 Feb 2015 13:05:31 +0000 (13:05 +0000)]
brcm2708: add Raspberry Pi 2 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44403
John Crispin [Wed, 11 Feb 2015 13:05:23 +0000 (13:05 +0000)]
brcm2708: remove 3.14 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44402
John Crispin [Wed, 11 Feb 2015 13:05:14 +0000 (13:05 +0000)]
ralink: fix when tx done is 0 also need to clean interrupt status
Signed-off-by: michael lee <igvtee@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44401
John Crispin [Wed, 11 Feb 2015 13:05:07 +0000 (13:05 +0000)]
mt76: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44400
Nicolas Thill [Wed, 11 Feb 2015 12:13:49 +0000 (12:13 +0000)]
ramips/mt7620: add missing config symbol
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44399
Nicolas Thill [Wed, 11 Feb 2015 11:31:38 +0000 (11:31 +0000)]
oprofile: mark broken on uml
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44398
Nicolas Thill [Wed, 11 Feb 2015 11:31:26 +0000 (11:31 +0000)]
config: disable kernel tracing on uml
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44397
Nicolas Thill [Wed, 11 Feb 2015 11:31:07 +0000 (11:31 +0000)]
ebtables: disable rpath
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44396
Nicolas Thill [Wed, 11 Feb 2015 11:31:01 +0000 (11:31 +0000)]
util-linux: disable rpath
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44395
Nicolas Thill [Wed, 11 Feb 2015 11:30:56 +0000 (11:30 +0000)]
toolchain/gcc: fix an ICE on ARM (PR58595)
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58595
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44394
John Crispin [Wed, 11 Feb 2015 10:21:02 +0000 (10:21 +0000)]
cns3xxx: set v3.18 as default
tested on a nor and a spi laguna
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44393
John Crispin [Wed, 11 Feb 2015 10:17:55 +0000 (10:17 +0000)]
brcm2708: update to v3.18
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 44392
John Crispin [Wed, 11 Feb 2015 10:17:38 +0000 (10:17 +0000)]
lantiq: fix VG3503J partition table for newer kernels
the kernel has increased and does not fit into the 1,5MB anymore.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44391
Rafał Miłecki [Wed, 11 Feb 2015 10:11:00 +0000 (10:11 +0000)]
bcm53xx: backport bcm47xx_wdt changes to 3.18 to use this driver in future
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44390
Felix Fietkau [Wed, 11 Feb 2015 10:09:57 +0000 (10:09 +0000)]
relayd: update to the latest version, adds fixes by Alejandro Enrique
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44389
John Crispin [Wed, 11 Feb 2015 10:09:56 +0000 (10:09 +0000)]
malta: add config file for kernel 3.19.
This is based on config-3.18 with the following changes.
- CONFIG_GENERIC_NET_UTILS is removed as it is already set in generic
kernel config.
- CONFIG_CPU_MICROMIPS is explicitly unset as required in kernel 3.19.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 44388
John Crispin [Wed, 11 Feb 2015 10:09:40 +0000 (10:09 +0000)]
generic: add a few missing symbols for generic config-3.19.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 44387
John Crispin [Wed, 11 Feb 2015 10:09:23 +0000 (10:09 +0000)]
ipq806x: update target to v3.18
Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.
This new kernel have been tested on AP148, which seems to works fine.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 44386
Rafał Miłecki [Wed, 11 Feb 2015 10:04:51 +0000 (10:04 +0000)]
kernel: backport bcma patches queued for 3.20
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44385
Rafał Miłecki [Wed, 11 Feb 2015 09:14:48 +0000 (09:14 +0000)]
kernel: 3.18: complete backport of some bcma patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44384
Rafał Miłecki [Wed, 11 Feb 2015 08:42:34 +0000 (08:42 +0000)]
bcm53xx: drop unused (and broken) GPIOLIB patch
First of all this patch was broken since adding 3.18 for bcm53xx. It was
modifying ARCH_BRCMSTB instead of ARCH_BCM_5301X.
Secondly we don't need it as ARCH_MULTIPLATFORM selects
ARCH_WANT_OPTIONAL_GPIOLIB for us.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44383
Luka Perkov [Tue, 10 Feb 2015 22:36:59 +0000 (22:36 +0000)]
kernel: switch 3.19 from -rc5 to release .0
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44381
Jo-Philipp Wich [Tue, 10 Feb 2015 18:55:44 +0000 (18:55 +0000)]
libevent2: remove defunct download mirror
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44380
Jo-Philipp Wich [Tue, 10 Feb 2015 15:49:36 +0000 (15:49 +0000)]
rules.mk: don't add staging_dir/host/bin/ path again
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44379
Jo-Philipp Wich [Tue, 10 Feb 2015 15:49:17 +0000 (15:49 +0000)]
include: export staging_dir/host/bin path from within host.mk (#18957)
We need to do that to pickup the prereq-build prepared symlinks for auxillary
operations like metadata scanning.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44378
Jo-Philipp Wich [Tue, 10 Feb 2015 15:48:48 +0000 (15:48 +0000)]
scripts: extend rstrip.sh to remove bad rpaths
Remove all rpath entries which do not point to a location below /lib or
/usr/lib and which do not begin with '$ORIGIN'.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44377
Jo-Philipp Wich [Tue, 10 Feb 2015 15:48:32 +0000 (15:48 +0000)]
tools: add patchelf host build
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44376
John Crispin [Tue, 10 Feb 2015 05:52:53 +0000 (05:52 +0000)]
ar71xx: add mc-mac1200r to do_load_ath10k_board_bin()
This patch adds the mc-mac1200r target to do_load_ath10k_board_bin() in
target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin to load the
ath10k radio MAC address from the EEPROM in MERCURY MAC1200R devices
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 44375
John Crispin [Tue, 10 Feb 2015 05:52:48 +0000 (05:52 +0000)]
oxnas: switch to 3.18
Tested on stg212 and kd20.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44374
John Crispin [Tue, 10 Feb 2015 05:52:41 +0000 (05:52 +0000)]
kernel: add missing symbol
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44373
John Crispin [Mon, 9 Feb 2015 19:34:49 +0000 (19:34 +0000)]
ralink: fix hw status almost full not work on mt7620 and mt7621
the old FE_INT_STATUS register becomes two registers.
FE_INT_STATUS and INT_STATUS. so the hw status almost full
must change to read from FE_INT_STATUS register.
tx/rx done read from INT_STATUS register.
mt7620 datasheet define CNT_GDM1_AF at BIT(29).
but after test it should be BIT(13). why?
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44371
John Crispin [Mon, 9 Feb 2015 19:34:32 +0000 (19:34 +0000)]
ralink: change rt3883 cpu type to 74kc
Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 44370
John Crispin [Mon, 9 Feb 2015 19:28:34 +0000 (19:28 +0000)]
realview: r44368 contained a superflous patch
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44369
John Crispin [Mon, 9 Feb 2015 19:24:48 +0000 (19:24 +0000)]
realview: bump to 3.18
Signed-off-by: Your Name <blogic@openwrt.org>
SVN-Revision: 44368
Rafał Miłecki [Mon, 9 Feb 2015 18:43:05 +0000 (18:43 +0000)]
bcm53xx: fix loading SPROM content by bcma init change
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44367
John Crispin [Mon, 9 Feb 2015 18:15:30 +0000 (18:15 +0000)]
kernel: add missing symbol to realtek wifi
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44366
Steven Barth [Mon, 9 Feb 2015 15:26:35 +0000 (15:26 +0000)]
openssl: fix upstream regression for non-ec builds
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44364
John Crispin [Mon, 9 Feb 2015 14:24:00 +0000 (14:24 +0000)]
ixp4xx: add v3.18 support
Signed-off-by: Your Name <blogic@openwrt.org>
SVN-Revision: 44363
Jo-Philipp Wich [Mon, 9 Feb 2015 12:54:29 +0000 (12:54 +0000)]
rpcd: fix session.{login,list,destroy} method signatures
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44362
Steven Barth [Mon, 9 Feb 2015 12:44:32 +0000 (12:44 +0000)]
polarssl: bump to 1.3.10, work around rename to mbedtls
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44361
John Crispin [Mon, 9 Feb 2015 12:17:00 +0000 (12:17 +0000)]
ar71xx: dir-505: fix reset button gpio active_low value
Fix 'active_low' default value for the reset button on DIR-505.
Signed-off-by: Rocco Folino <rocco@devzen.net>
SVN-Revision: 44360
John Crispin [Mon, 9 Feb 2015 12:16:51 +0000 (12:16 +0000)]
ar71xx: Add support for MERCURY MAC1200R
This patch adds support for MERCURY MAC1200R, a dual band 802.11bgn + 802.11ac
router based on the AR9344, with QCA988x ath10k radio and 5 Fast Ethernet ports
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 44359
John Crispin [Mon, 9 Feb 2015 12:16:43 +0000 (12:16 +0000)]
ar71xx: fix nbg6716 power and usb led
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Marcin Mikolajczak <gr4ffy@gmail.com>
SVN-Revision: 44358
John Crispin [Mon, 9 Feb 2015 12:16:04 +0000 (12:16 +0000)]
oxnas: copy ubinized images to binary folder
Since r43778 ubinized images are stored inside KDIR. This makes sense
when using an uninized image to generate a factory image.
On oxnas ubinized images were used for sysupgrade before proper NAND
support was implemented in OpenWrt.
For users still on old builds before sysupgrade.tar was introduced,
ubinized image is thus the only option to conveniantly upgrade to a
more recent build.
Copy ubinized image also to BIN_DIR, so it will be easier for users
to find them.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44357
John Crispin [Mon, 9 Feb 2015 12:15:45 +0000 (12:15 +0000)]
ramips: Kingston MLW221 and MLWG2 cleanup
MLW221 dts use tabs NOT spaces.
MLWG2 dts typo and 1 tab not spaces
01_leds and diag.sh cleanup
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 44356
John Crispin [Mon, 9 Feb 2015 12:15:17 +0000 (12:15 +0000)]
ramips: fix mt76 radio pcie location definition for in Xiaomi MiWiFi Mini
This patch sets the correct location of the mt76 radio in the pcie bridge
(pcie-bridge instead of pcie0). Additionaly, it disables the 2.4 GHz band.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 44355
John Crispin [Mon, 9 Feb 2015 12:15:00 +0000 (12:15 +0000)]
ramips: Add mt76 node for Lenovo Y1 and Y1S.
Both Y1 and Y1S have MT7612E wireless chip so I submitted this patch.
Tested on Lenovo Y1.
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 44354
John Crispin [Mon, 9 Feb 2015 12:14:48 +0000 (12:14 +0000)]
lantiq: td-w8970: fix failsafe mode
Fix failsafe mode for TD-W8970, register interface for preinit.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 44353
John Crispin [Mon, 9 Feb 2015 12:14:32 +0000 (12:14 +0000)]
lantiq: td-w8970: fix reset button
For TP-LINK TD-W8970 button should work as "reset", not "BTN_1".
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 44352
John Crispin [Mon, 9 Feb 2015 12:14:22 +0000 (12:14 +0000)]
lantiq: fix typo in script
Fix typo in firmware installer script.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 44351
John Crispin [Mon, 9 Feb 2015 12:14:09 +0000 (12:14 +0000)]
octeon: switch to 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44350
John Crispin [Mon, 9 Feb 2015 12:13:55 +0000 (12:13 +0000)]
ralink: add 3.18 support
keep default as 3.14, mt7621 gic need to be ported to 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44349
John Crispin [Mon, 9 Feb 2015 12:13:25 +0000 (12:13 +0000)]
lantiq: add 3.18 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44348
John Crispin [Mon, 9 Feb 2015 12:12:52 +0000 (12:12 +0000)]
lantiq: fix dsl drivers for 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44346
John Crispin [Mon, 9 Feb 2015 12:12:39 +0000 (12:12 +0000)]
au1000: add 3.18 support
this is only compile tested
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44345
John Crispin [Mon, 9 Feb 2015 12:12:30 +0000 (12:12 +0000)]
ar7: add 3.18 support
this is only compile tested
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44344
John Crispin [Mon, 9 Feb 2015 12:12:09 +0000 (12:12 +0000)]
ar7-atm: make it compile under 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44343
John Crispin [Mon, 9 Feb 2015 12:11:34 +0000 (12:11 +0000)]
malta: drop 3.10 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44342
John Crispin [Mon, 9 Feb 2015 12:11:28 +0000 (12:11 +0000)]
malta: disable 64 builds as the userland has been broken for ages
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44341
John Crispin [Mon, 9 Feb 2015 12:11:19 +0000 (12:11 +0000)]
malta: add 3.18 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44340
John Crispin [Mon, 9 Feb 2015 12:10:46 +0000 (12:10 +0000)]
kernel: copy mips_decompressor_memmove patch to 3.18/3.19
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44339
John Crispin [Mon, 9 Feb 2015 12:10:18 +0000 (12:10 +0000)]
kernel: add missing symbols
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44338
John Crispin [Mon, 9 Feb 2015 12:10:07 +0000 (12:10 +0000)]
base-files: taint the build if the override mechanism is used
If some packages are overridden (using ./scripts/feeds -f), add a new
taint flag in /etc/openwrt_release. We'll use the CONFIG_OVERRIDE_PKGS
variable reported through the .config to detect it.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 44337
John Crispin [Mon, 9 Feb 2015 12:09:43 +0000 (12:09 +0000)]
build: propagate override information to .config file
With this change, override information is now parsed from the metadata
and put in the %packages hash. A new hash - %overrides - is created and
exported, to be used during the .config-package.in generation.
If an override is detected, a new option CONFIG_OVERRIDE_PKGS will be
created in the .config, and will contain a space-separated list of all
the overridden packages.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 44336
John Crispin [Mon, 9 Feb 2015 12:09:31 +0000 (12:09 +0000)]
build: propagate override information to .packageinfo
Packages overridden with "./scripts/feeds -f" will show up with an
"Override: <original-package-name>" in .packageinfo.
This will be useful to create a corresponding option in .config and
use this information during the build process.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 44335
John Crispin [Mon, 9 Feb 2015 12:09:23 +0000 (12:09 +0000)]
build: allow openwrt.git packages to be replaced by feeds
Currently, replacing a package available in openwrt.git requires
modifications in openwrt.git, or requires duplicating the package in a
feed but with a different name, which causes all kind of problems
related to dependencies (all packages selecting it would have to be
modified accordingly to select the new package).
With this change, if a package with the same name is present both in
feeds/ and package/ folders, the one in feeds/ can override the one
in package/, both in the menuconfig and during the build, by passing the
"-f" option to "./scripts/feeds install"
This mechanism is particularly useful for vendor tree, or in general for
application which needs to replace one particular package which exists
within openwrt.git by a custom/newer version.
Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 44334
John Crispin [Mon, 9 Feb 2015 12:09:17 +0000 (12:09 +0000)]
kernel: fix compile error inside adm6996.c
drivers/net/phy/adm6996.c:881:5: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'u32' [-Wformat=]
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44333
Steven Barth [Mon, 9 Feb 2015 12:04:00 +0000 (12:04 +0000)]
openssl: bump to 1.0.2
Fixes CVE-2014-3513, CVE-2014-3567, CVE-2014-3568, CVE-2014-3566
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44332
Steven Barth [Mon, 9 Feb 2015 08:30:06 +0000 (08:30 +0000)]
netifd: fix device config handling and add some config options
Thanks to Hans Dedecker
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44331
Jo-Philipp Wich [Sun, 8 Feb 2015 22:54:27 +0000 (22:54 +0000)]
sdk: use prepare target to initialize git snapshot
The new approach is less prone to race conditions and will properly
snapshot the symlinks prepared by the prereq-build target.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44330
Jo-Philipp Wich [Sun, 8 Feb 2015 22:54:19 +0000 (22:54 +0000)]
include: remove SDK specific target from toplevel.mk
Instead introduce a generic "make prepare" target which is executed if
include/prepare.mk exists.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44329
Jo-Philipp Wich [Sun, 8 Feb 2015 22:54:15 +0000 (22:54 +0000)]
include: cmake: prevent inclusion of rpath in binaries
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44328
Jo-Philipp Wich [Sun, 8 Feb 2015 22:20:38 +0000 (22:20 +0000)]
6in4: fix update timeout
The recent rework of the 6in4 endpoint update broke the retry mechanism.
Rework the timeout handling and make the update status more verbose.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44327
Luka Perkov [Sun, 8 Feb 2015 15:42:42 +0000 (15:42 +0000)]
ramips: fix patches after 3.14.32 bump
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44324
Nicolas Thill [Sun, 8 Feb 2015 15:34:20 +0000 (15:34 +0000)]
linux/generic: add missing config symbols
Related to debug/tracing, only added to 3.14+, might be needed for older versions as well
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44323
Nicolas Thill [Sun, 8 Feb 2015 15:34:13 +0000 (15:34 +0000)]
linux/sunxi: rename A20-OLinuXino-Lime profile
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 44322
Luka Perkov [Sun, 8 Feb 2015 15:31:25 +0000 (15:31 +0000)]
x86: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44321
Luka Perkov [Sun, 8 Feb 2015 15:09:45 +0000 (15:09 +0000)]
lantiq: fix patches after 3.14.32 bump
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44320
Luka Perkov [Sun, 8 Feb 2015 12:01:39 +0000 (12:01 +0000)]
kirkwood: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44319
Luka Perkov [Sun, 8 Feb 2015 12:01:37 +0000 (12:01 +0000)]
kernel: update 3.18 to 3.18.6
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44318
Jo-Philipp Wich [Sat, 7 Feb 2015 21:26:20 +0000 (21:26 +0000)]
x86: declare missing kernel symbols
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44316
Luka Perkov [Sat, 7 Feb 2015 21:11:06 +0000 (21:11 +0000)]
ar71xx: ubnt: move new board patches into one
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44315
Luka Perkov [Sat, 7 Feb 2015 21:10:51 +0000 (21:10 +0000)]
ar71xx: rb2011: apply patch to file
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44314
Jo-Philipp Wich [Sat, 7 Feb 2015 21:01:48 +0000 (21:01 +0000)]
imagebuilder: align filename with SDK
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44313
Jo-Philipp Wich [Sat, 7 Feb 2015 21:01:43 +0000 (21:01 +0000)]
sdk: rename file to mention target/subtarget and move host system to suffix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44312
Jo-Philipp Wich [Sat, 7 Feb 2015 21:01:37 +0000 (21:01 +0000)]
toolchain: respect CONFIG_VERSION_FILENAMES and add host system suffix
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44311
Jo-Philipp Wich [Sat, 7 Feb 2015 21:01:28 +0000 (21:01 +0000)]
openvpn: autostart openvpn instances for each .conf file in /etc/openvpn
Align init behaviour with other distros by starting an OpenVPN instance
for each config file found in /etc/openvpn/. This removes the additional
requirement to "register" the configs with uci and thus simplifies the
setup.
Make sure to respect the disabled state in uci to not suddenly autostart
instances which have been previously set to disabled, also skip configs
which are already started due to uci configuration.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44310
Luka Perkov [Sat, 7 Feb 2015 20:53:16 +0000 (20:53 +0000)]
ar71xx: merge board specific patches into one
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44309
Luka Perkov [Sat, 7 Feb 2015 19:59:08 +0000 (19:59 +0000)]
package: uboot-envtools: add nbg6716 to appropriate group
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44308
Luka Perkov [Sat, 7 Feb 2015 19:59:05 +0000 (19:59 +0000)]
ar71xx: uci-defaults: add el-mini to appropriate group
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44307
Luka Perkov [Sat, 7 Feb 2015 19:59:02 +0000 (19:59 +0000)]
ar71xx: qihoo: define flash variable as static
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44306
Luka Perkov [Sat, 7 Feb 2015 19:58:58 +0000 (19:58 +0000)]
targets: base-files: diag.sh does not need to be executable
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44305
projects / openwrt / openwrt.git / log