4 years agoltq-vdsl-app: use the final xtse format
John Crispin [Fri, 1 Jan 2016 21:19:55 +0000 (21:19 +0000)]
ltq-vdsl-app: use the final xtse format

This way we can drop the call to sed.

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48050

4 years agoralink: add WRTnode2 platform and led support
John Crispin [Fri, 1 Jan 2016 21:19:50 +0000 (21:19 +0000)]
ralink: add WRTnode2 platform and led support

Signed-off-by: xzmu <>
SVN-Revision: 48049

4 years agoledtrig-netdev: add support for renamed devices
John Crispin [Fri, 1 Jan 2016 21:19:41 +0000 (21:19 +0000)]
ledtrig-netdev: add support for renamed devices

The ppp0 interface is renamed after the connection is established. Due
to a missing NETDEV_REGISTER event, the ledtrig-netdev isn't aware of
the renamed interface and literally ignores the device
(no tx/rx indication, led isn't switched off with 'ifdown wan').

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48048

4 years agolantiq: match default xdsl mode and default wan interface
John Crispin [Fri, 1 Jan 2016 21:19:32 +0000 (21:19 +0000)]
lantiq: match default xdsl mode and default wan interface

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48047

4 years agolantiq: convert vendorid into human readable form
John Crispin [Fri, 1 Jan 2016 21:19:27 +0000 (21:19 +0000)]
lantiq: convert vendorid into human readable form

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48046

4 years agolantiq: add the current profile to the stats output
John Crispin [Fri, 1 Jan 2016 21:19:21 +0000 (21:19 +0000)]
lantiq: add the current profile to the stats output

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48045

4 years agolantiq: TDW8980 - use devicename:colour:function led naming scheme
John Crispin [Fri, 1 Jan 2016 21:19:12 +0000 (21:19 +0000)]
lantiq: TDW8980 - use devicename:colour:function led naming scheme

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48044

4 years agolantiq: P2812HNUFX - move usb leds to P2812HNU-F1
John Crispin [Fri, 1 Jan 2016 21:18:59 +0000 (21:18 +0000)]
lantiq: P2812HNUFX - move usb leds to P2812HNU-F1

The P2812HNU-F3 doesn't have usb leds. Only the P2812HNU-F1 has those

Reported-by: Sylwester Petela <>
Signed-off-by: Mathias Kresin <>
SVN-Revision: 48043

4 years agolantiq: use devicename:colour:function led naming scheme
John Crispin [Fri, 1 Jan 2016 21:18:54 +0000 (21:18 +0000)]
lantiq: use devicename:colour:function led naming scheme

The leds of the following boards are not renamed due to lack of

- ARV7519PW
- ARV7510PW22
- ARV4510PW

The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't
match the leds from the manual or pictures (e.g. there shouldn't be a wps led).

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48042

4 years agolantiq: add support for indicating the boot state using three leds
John Crispin [Fri, 1 Jan 2016 21:18:47 +0000 (21:18 +0000)]
lantiq: add support for indicating the boot state using three leds

The BTHOMEHUBV5A has a RGB power led, where every colour is perfect to
indicate the current boot state. This patch adds support for such cases.

The existing led sequences should be the same as before.

Boards which are using a led different from power (like TDW89x0) are
changed to switch of the led after boot

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48041

4 years agolantiq: use dsl led defined in DTS
John Crispin [Fri, 1 Jan 2016 21:18:38 +0000 (21:18 +0000)]
lantiq: use dsl led defined in DTS

dsl_control ( is the only process which is aware of the
state of the atm/ptm interface. Use the dsl led exclusive for the dsl
line state.

On boards which don't have a distinct internet and a dsl led, let the
netdev status of the atm interface trigger the shared led.

Triggering the shared led according to the status of the ppp interface
isn't suitable, since the led would be switched of if the ppp
connection goes down, but the line is still in sync.

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48040

4 years agolantiq: use power leds defined in DTS
John Crispin [Fri, 1 Jan 2016 21:18:30 +0000 (21:18 +0000)]
lantiq: use power leds defined in DTS

Use the power leds defined in the dts file instead of hardcoded led names.

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48039

4 years agolantiq: use default leds defined in DTS
John Crispin [Fri, 1 Jan 2016 21:18:21 +0000 (21:18 +0000)]
lantiq: use default leds defined in DTS

Remove all now double defined leds from the led board file. Use pppoe
as default for all broadband connections, since it's the default in
OpenWrt now.

Rename the the wifi leds to make sure, the not applicable default
values get overwritten.

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48038

4 years agolantiq: define default leds in dts files
John Crispin [Fri, 1 Jan 2016 21:18:08 +0000 (21:18 +0000)]
lantiq: define default leds in dts files

- ARV7525PW: use the power led as dsl led as done by the stock firmware
- FRITZ3370: use the info led as internet led
- FRITZ7320: use the power led as dsl led as done by the stock firmware

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48037

4 years agolantiq: ARV752DPW - fix dts file
John Crispin [Fri, 1 Jan 2016 21:18:00 +0000 (21:18 +0000)]
lantiq: ARV752DPW - fix dts file

Use the same led logic and labels as the OEM firmware (red = okay,
blue = failure).

Add the red internet led.

Remove missing usb led workaround. The workaround shouldn't be in the
default configuration.

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48036

4 years agolantiq: ARV752DPW22 - fix dts file
John Crispin [Fri, 1 Jan 2016 21:17:55 +0000 (21:17 +0000)]
lantiq: ARV752DPW22 - fix dts file

No need to switch (and keep) on all leds at boot. Use the same led
logic and labels as the OEM firmware (red = okay, blue = failure).

Add the red internet led.

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48035

4 years agolantiq: DGN1000B - fix typo in dts file
John Crispin [Fri, 1 Jan 2016 21:17:50 +0000 (21:17 +0000)]
lantiq: DGN1000B - fix typo in dts file

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48034

4 years agolantiq: ARV4518PWR01* move redundant parts to dtsi
John Crispin [Fri, 1 Jan 2016 21:17:42 +0000 (21:17 +0000)]
lantiq: ARV4518PWR01* move redundant parts to dtsi

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48033

4 years agolantiq: BTHOMEHUBV2B - remove missing usb led workaround
John Crispin [Fri, 1 Jan 2016 21:17:34 +0000 (21:17 +0000)]
lantiq: BTHOMEHUBV2B - remove missing usb led workaround

The workaround shouldn't be in the default configuration.

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48032

4 years agolantiq: P2812HNUFX - move leds to dtsi
John Crispin [Fri, 1 Jan 2016 21:17:26 +0000 (21:17 +0000)]
lantiq: P2812HNUFX - move leds to dtsi

Beside the used labels, they are the same on both boards.

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48031

4 years agoralink: fix rt3050/5350 ethernet switch support
John Crispin [Fri, 1 Jan 2016 21:17:21 +0000 (21:17 +0000)]
ralink: fix rt3050/5350 ethernet switch support

Signed-off-by: John Crispin <>
SVN-Revision: 48030

4 years agoramips: set the wifi mac address to the same as LAN on witi
Felix Fietkau [Fri, 1 Jan 2016 18:58:02 +0000 (18:58 +0000)]
ramips: set the wifi mac address to the same as LAN on witi

Signed-off-by: Felix Fietkau <>
SVN-Revision: 48029

4 years agomt76: update to the latest version from the mt7603 branch, adds support for overridin...
Felix Fietkau [Fri, 1 Jan 2016 18:57:54 +0000 (18:57 +0000)]
mt76: update to the latest version from the mt7603 branch, adds support for overriding the mac address via OF

Signed-off-by: Felix Fietkau <>
SVN-Revision: 48028

4 years agoramips: add a script to fix up the broken mac address on the witi board
Felix Fietkau [Fri, 1 Jan 2016 18:57:39 +0000 (18:57 +0000)]
ramips: add a script to fix up the broken mac address on the witi board

Signed-off-by: Felix Fietkau <>
SVN-Revision: 48027

4 years agokernel: fold of_get_mac_address_mtd into of_get_mac_address
Felix Fietkau [Fri, 1 Jan 2016 18:57:29 +0000 (18:57 +0000)]
kernel: fold of_get_mac_address_mtd into of_get_mac_address

This makes it easier to keep drivers in sync with upstream

Signed-off-by: Felix Fietkau <>
SVN-Revision: 48026

4 years agoramips: fix kernel configuration for mt7628
Felix Fietkau [Fri, 1 Jan 2016 15:20:38 +0000 (15:20 +0000)]
ramips: fix kernel configuration for mt7628

Signed-off-by: Felix Fietkau <>
SVN-Revision: 48025

4 years agoramips: add missing clk_round_rate function to fix buildbot errors
Felix Fietkau [Fri, 1 Jan 2016 14:33:09 +0000 (14:33 +0000)]
ramips: add missing clk_round_rate function to fix buildbot errors

Signed-off-by: Felix Fietkau <>
SVN-Revision: 48024

4 years agoramips: fix inverted LEDs for RE6500
Felix Fietkau [Fri, 1 Jan 2016 12:27:45 +0000 (12:27 +0000)]
ramips: fix inverted LEDs for RE6500

Signed-off-by: Bjoern Dobe <>
SVN-Revision: 48022

4 years agoramips: add mac address assignment for eth0 on RE6500
Felix Fietkau [Fri, 1 Jan 2016 12:26:38 +0000 (12:26 +0000)]
ramips: add mac address assignment for eth0 on RE6500

Signed-off-by: Bjoern Dobe <>
Signed-off-by: Felix Fietkau <>
SVN-Revision: 48021

4 years agoramips: fix firmware partition size
Felix Fietkau [Fri, 1 Jan 2016 12:26:30 +0000 (12:26 +0000)]
ramips: fix firmware partition size

Signed-off-by: Bjoern Dobe <>
SVN-Revision: 48020

4 years agoramips: fix memory size for RE6500
Felix Fietkau [Fri, 1 Jan 2016 12:26:26 +0000 (12:26 +0000)]
ramips: fix memory size for RE6500

Signed-off-by: Bjoern Dobe <>
SVN-Revision: 48019

4 years agokernel: fix duplication of sch_netem in multiple packages (#21479)
Felix Fietkau [Fri, 1 Jan 2016 12:26:09 +0000 (12:26 +0000)]
kernel: fix duplication of sch_netem in multiple packages (#21479)

Signed-off-by: Felix Fietkau <>
SVN-Revision: 48018

4 years agodante: fix MD5SUM
Nicolas Thill [Thu, 31 Dec 2015 09:20:59 +0000 (09:20 +0000)]
dante: fix MD5SUM

MD5SUM is wrong, it was not updated during last update to v1.4.1.

Thanks to Daniel Dickinson <> for reporting it.

Signed-off-by: Nicolas Thill <>
SVN-Revision: 48017

4 years agoimx6: images: ventana: change name of ubi output
Luka Perkov [Tue, 29 Dec 2015 23:40:41 +0000 (23:40 +0000)]
imx6: images: ventana: change name of ubi output

Change the name of the .ubi produced to strip out the word 'factory'. This is
mainly due to the fact that there is no difference between the Ventana 'factory'
image vs the standard image.

Name changes from:
openwrt-imx6-ventana-squashfs.nand-factory_<size>.ubi to

Signed-off-by: Pushpal Sidhu <>
SVN-Revision: 48016

4 years agouboot-imx6: add support for i.MX6q SABRE board
Luka Perkov [Mon, 28 Dec 2015 04:56:33 +0000 (04:56 +0000)]
uboot-imx6: add support for i.MX6q SABRE board

U-boot ships with the `mx6qsabresd` configuration file to configure a
bootloader suitable for booting the Freescale i.MX6q SABRE evaluation board
from SD card. Expose this option in the uboot-imx6 Makefile.

Signed-off-by: Keno Fischer <>
SVN-Revision: 48014

4 years agoimx6: fix device-tree mac address assignment for ventana sky2/eth1
Luka Perkov [Mon, 28 Dec 2015 04:56:27 +0000 (04:56 +0000)]
imx6: fix device-tree mac address assignment for ventana sky2/eth1

Some Ventana boards have a Marvell sky2 GigE controller as eth1 however
assigning the mac address through device-tree is difficult because the
PCI slot can move around depending on board configuration and slot population.

To work around this we add a patch to the sky2 driver to allow accessing its
mac address via a device-tree alias.

Signed-off-by: Tim Harvey <>
Signed-off-by: Pushpal Sidhu <>
SVN-Revision: 48013

4 years agoimx6: add i2c retries for Ventana /dev/i2c-0
Luka Perkov [Mon, 28 Dec 2015 04:56:13 +0000 (04:56 +0000)]
imx6: add i2c retries for Ventana /dev/i2c-0

On Ventana boards the Gateworks System Controller is the only device on I2C1
(/dev/i2c-0) and it can NAK transfers if it is busy in an ADC loop. Because
this is a multi-function device with several slave addresses it is best to
add retries at the controller level instead of within each slave driver. This
adds a patch that adds 3 retries for i2c transactions only for Ventana boards
and only for I2C1

Signed-off-by: Tim Harvey <>
Signed-off-by: Pushpal Sidhu <>
SVN-Revision: 48012

4 years agoimx6: imx: thermal: use CPU temperature grade info for thresholds
Luka Perkov [Mon, 28 Dec 2015 04:56:07 +0000 (04:56 +0000)]
imx6: imx: thermal: use CPU temperature grade info for thresholds

This is a backport of a2291badc355d58ead5c19ae0609468947416040 from thermal-soc
accepted upstream.

The IMX6Q/IMX6DL SoC's have a 2-bit temperature grade stored in OTP. Instead
of assuming 85C for passive cooling threshold and 100C for critical base
these thresholds off the thermal gade max CPU temperature:
 - passive threshold: max - 10C
 - critical threshold: max - 5C

Signed-off-by: Tim Harvey <>
SVN-Revision: 48011

4 years agoimx6: Add pwm nodes
Luka Perkov [Mon, 28 Dec 2015 04:55:54 +0000 (04:55 +0000)]
imx6: Add pwm nodes

Upstream status: Accepted

Signed-off-by: Pushpal Sidhu <>
SVN-Revision: 48010

4 years agoimx6: ventana: add ecspi3 host controller for GW52xx
Luka Perkov [Mon, 28 Dec 2015 04:55:48 +0000 (04:55 +0000)]
imx6: ventana: add ecspi3 host controller for GW52xx

Certain board revisions of the GW52xx support an SPI host controller with
a single chip-select going to an off board connector.

Signed-off-by: Tim Harvey <>
Signed-off-by: Pushpal Sidhu <>
SVN-Revision: 48009

4 years agoimx6: Add 4.3 support
Luka Perkov [Mon, 28 Dec 2015 04:55:45 +0000 (04:55 +0000)]
imx6: Add 4.3 support

Build and boot tested on the following hardware:
 * GW54xx
 * GW53xx
 * GW52xx
 * GW51xx
 * GW552x
 * GW551x

Signed-off-by: Pushpal Sidhu <>
SVN-Revision: 48008

4 years agoimx6: drop lingering files
Luka Perkov [Mon, 28 Dec 2015 04:55:33 +0000 (04:55 +0000)]
imx6: drop lingering files

Since 3.18 kernel support was dropped, remove lingering files.

Signed-off-by: Pushpal Sidhu <>
SVN-Revision: 48007

4 years ago6in4: Corrected tunnelbroker tunnel update URL
Hauke Mehrtens [Sun, 27 Dec 2015 20:42:26 +0000 (20:42 +0000)]
6in4: Corrected tunnelbroker tunnel update URL

Changed the tunnel update URL into format tunnelbrokers
example has, that made it work again. Current method gives "Username/Password
Authentication Failed." when I tried the wget line manually and logread
eventually says also "6in4: update failed". With corrected URL it works fine:
"good 111.222.333.444" or "nochg 111.222.333.444" and logread concurs with
success, and tunnel actually updates.

Tested-by: Vaasa Hacklab <>
Signed-off-by: Sami Olmari <>
SVN-Revision: 48006

4 years agoar71xx: fix sysupgrade for wnr2200
Felix Fietkau [Wed, 23 Dec 2015 23:42:18 +0000 (23:42 +0000)]
ar71xx: fix sysupgrade for wnr2200

Signed-off-by: Felix Fietkau <>
SVN-Revision: 48005

4 years agolibnl: fix warning with poll.h include on musl
John Crispin [Wed, 23 Dec 2015 19:26:26 +0000 (19:26 +0000)]
libnl: fix warning with poll.h include on musl

Warning is:
  #warning redirecting incorrect #include <sys/poll.h> to <poll.

Not a big issue.
But it can be annoying when building with -Werror set.

Signed-off-by: Alexandru Ardelean <>
SVN-Revision: 48004

4 years agobinutils: upgrade to version 2.25
John Crispin [Wed, 23 Dec 2015 19:26:11 +0000 (19:26 +0000)]
binutils: upgrade to version 2.25

Fixes build:
config/tc-i386.c: In function 'build_modrm_byte':
config/tc-i386.c:6143:31: error: logical not is only applied to the left hand side of comparison [-Werror=logical-not-parentheses]
         && !op.bitfield.reg64 != 1

Contains this fix:

Signed-off-by: Alexandru Ardelean <>
SVN-Revision: 48003

4 years agolantiq: fix Image Builder
John Crispin [Wed, 23 Dec 2015 19:25:55 +0000 (19:25 +0000)]
lantiq: fix Image Builder

Signed-off-by: Mathias Kresin <>
SVN-Revision: 48002

4 years agofstools: update to latest git HEAD
John Crispin [Wed, 23 Dec 2015 19:25:46 +0000 (19:25 +0000)]
fstools: update to latest git HEAD

adds stacked ram overlays.

Signed-off-by: John Crispin <>
SVN-Revision: 48001

4 years agoca-certificates: update to version 20151214
John Crispin [Wed, 23 Dec 2015 19:25:33 +0000 (19:25 +0000)]
ca-certificates: update to version 20151214

update to version 20151214

Signed-off-by: Christian Schoenebeck <>
SVN-Revision: 48000

4 years agoswconfig: switch kernel PORT_LINK support to SWITCH_TYPE_LINK
John Crispin [Wed, 23 Dec 2015 19:25:02 +0000 (19:25 +0000)]
swconfig: switch kernel PORT_LINK support to SWITCH_TYPE_LINK

As explained earlier, using SWITCH_TYPE_LINK gives more flexibility,
it doesn't require e.g. string parsing to read some data.

Signed-off-by: Rafał Miłecki <>
SVN-Revision: 47999

4 years agoswconfig: support receiving SWITCH_TYPE_LINK from kernel
John Crispin [Wed, 23 Dec 2015 19:24:45 +0000 (19:24 +0000)]
swconfig: support receiving SWITCH_TYPE_LINK from kernel

When using cli, print link state the same way kernel used to do it.
This will allow kernel switching PORT_LINK from SWITCH_TYPE_STRING.

Signed-off-by: Rafał Miłecki <>
SVN-Revision: 47998

4 years agoswconfig: add SWITCH_TYPE_LINK and support sending link info to user space
John Crispin [Wed, 23 Dec 2015 19:24:30 +0000 (19:24 +0000)]
swconfig: add SWITCH_TYPE_LINK and support sending link info to user space

So far we were sending link data as a string. It got some drawbacks:
1) Didn't allow writing clean user space apps reading link state. It was
   needed to do some screen scraping.
2) Forced whole PORT_LINK communication to be string based. Adding
   support for *setting* port link required passing string and parting
   it in the kernel space.

Signed-off-by: Rafał Miłecki <>
SVN-Revision: 47997

4 years agolantiq: fix PCI_DEVICE_ID_LANTIQ_PCIE
John Crispin [Wed, 23 Dec 2015 18:25:22 +0000 (18:25 +0000)]

It's not necessary to define PCI_* if pci_ids.h is included a few
lines above.

The change to pci_ids.h doesn't look intentional to me, especially
since the former value is added to the top of ifxmips_fixup_pcie.c.

Both changes were introduced with the kernel 4.1 support patches and
were not present in the 3.18 patches.

Signed-off-by: Mathias Kresin <>
SVN-Revision: 47996

4 years agolantiq: ltq-adsl-mei: fix typo
John Crispin [Wed, 23 Dec 2015 18:25:03 +0000 (18:25 +0000)]
lantiq: ltq-adsl-mei: fix typo

Signed-off-by: Mathias Kresin <>
SVN-Revision: 47995

4 years agolantiq: TDW89x0 - increase spi frequency
John Crispin [Wed, 23 Dec 2015 18:24:56 +0000 (18:24 +0000)]
lantiq: TDW89x0 - increase spi frequency

Use the same max spi frequency as set in u-boot.

According to the datasheets, the Q64-104HIP as well as the Winbond
25Q64FVSIG support spi frequencies up to 50 MHz. During my tests, the
Q64-104HIP couldn't be recognized/initialized if the frequency
was > 40MHz.

Both chips do support fast read as well.

While touching the dts file, I fixed the dtc compiler warnings.

Signed-off-by: Mathias Kresin <>
SVN-Revision: 47994

4 years agolantiq: disable SW_PORTMAP usage in the ethernet driver
John Crispin [Wed, 23 Dec 2015 18:24:43 +0000 (18:24 +0000)]
lantiq: disable SW_PORTMAP usage in the ethernet driver

using the special tag in this way lead to port mirroring for certain types of traffic.
fallback to using th PMAC_EWAN register for the wan portmap.

Signed-off-by: John Crispin <>
SVN-Revision: 47993

4 years agoledtrig-netdev: reset link status & stats after changing device_name
Rafał Miłecki [Wed, 23 Dec 2015 17:11:49 +0000 (17:11 +0000)]
ledtrig-netdev: reset link status & stats after changing device_name

Previously switching to non-existing device (interface) could result in
leaving LED on.

Signed-off-by: Rafał Miłecki <>
SVN-Revision: 47990

4 years agoledtrig-netdev: drop locking from timer callback function
Rafał Miłecki [Wed, 23 Dec 2015 15:45:43 +0000 (15:45 +0000)]
ledtrig-netdev: drop locking from timer callback function

We may just delete timer on every trigger update and then start it again
if needed. This will let us avoid both: races and locking in frequently
called timer callback.

Signed-off-by: Rafał Miłecki <>
SVN-Revision: 47987

4 years agoledtrig-netdev: switch rwlock to spinlock
Rafał Miłecki [Wed, 23 Dec 2015 15:45:36 +0000 (15:45 +0000)]
ledtrig-netdev: switch rwlock to spinlock

Read/write lock was adding useless complexity, there wasn't any real
gain in case of this driver.
Also switch to _bh variants to avoid deadlocks.

Signed-off-by: Rafał Miłecki <>
SVN-Revision: 47986

4 years agoar71xx: Update preinit script for new ath10k firmware
John Crispin [Wed, 23 Dec 2015 14:45:30 +0000 (14:45 +0000)]
ar71xx: Update preinit script for new ath10k firmware

Signed-off-by: Martin Blumenstingl <>
SVN-Revision: 47985

4 years agoath10k-firmware: Update QCA988X firmware to
John Crispin [Wed, 23 Dec 2015 14:45:22 +0000 (14:45 +0000)]
ath10k-firmware: Update QCA988X firmware to

Signed-off-by: Martin Blumenstingl <>
SVN-Revision: 47984

4 years agoar71xx: refresh patches
John Crispin [Wed, 23 Dec 2015 14:45:05 +0000 (14:45 +0000)]
ar71xx: refresh patches

Signed-off-by: Roman Yeryomin <>
SVN-Revision: 47983

4 years agoar71xx: add support for QCA956x ethernet
John Crispin [Wed, 23 Dec 2015 14:44:56 +0000 (14:44 +0000)]
ar71xx: add support for QCA956x ethernet

Signed-off-by: Roman Yeryomin <>
SVN-Revision: 47982

4 years agoar71xx: update QCA956x support
John Crispin [Wed, 23 Dec 2015 14:44:44 +0000 (14:44 +0000)]
ar71xx: update QCA956x support

- separate qca956x and tp9343 (they use different IDs)
- rename qca9561->qca956x for consistency
- add missing bits (device reset, gpio output select)
- fix wmac setup

Signed-off-by: Roman Yeryomin <>
SVN-Revision: 47981

4 years agobase-files: allow timezone to be overriden by zonename (proper zoneinfo support)
John Crispin [Wed, 23 Dec 2015 14:44:31 +0000 (14:44 +0000)]
base-files: allow timezone to be overriden by zonename (proper zoneinfo support)

Signed-off-by: Roman Yeryomin <>
SVN-Revision: 47980

4 years agoopenvpn: fix configure options
John Crispin [Wed, 23 Dec 2015 14:44:24 +0000 (14:44 +0000)]
openvpn: fix configure options

- eurephia:
commit: Remove the --disable-eurephia configure option

- fix option name:
http proxy option is now called http-proxy (see

configure: WARNING: unrecognized options: --disable-nls, --disable-eurephia, --enable-http

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 47979

4 years agotools/e2fsprogs: remove outdated configure args
John Crispin [Wed, 23 Dec 2015 14:44:18 +0000 (14:44 +0000)]
tools/e2fsprogs: remove outdated configure args

removed upstream in 1.40.5:
Don't build e2fsck statically by default anymore 7e8fe327b51051adcbb0d44169b1a933173ce1ff

configure: WARNING: unrecognized options: --disable-shared, --enable-static, --enable-dynamic-e2fsck

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 47978

4 years agoutil-linux: remove outdated configure options
John Crispin [Wed, 23 Dec 2015 14:44:12 +0000 (14:44 +0000)]
util-linux: remove outdated configure options

removed upstream in commit:
- convert mount/ to module, rename to mount-deprecated/
- build-sys: remove deprecated-mount/

fixes log warning:
compile.txt:configure: WARNING: unrecognized options: --enable-new-mount

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 47977

4 years agopackage/lldpd: Remove extraneous select
John Crispin [Wed, 23 Dec 2015 14:44:05 +0000 (14:44 +0000)]
package/lldpd: Remove extraneous select

Only the conditional dependency ought to be required;
if build fails with JSON there is some other problem
at work.

Signed-off-by: Daniel Dickinson <>
SVN-Revision: 47976

4 years agofirmware-utils: allow mkfwimage2 to use - in partition names
John Crispin [Wed, 23 Dec 2015 14:43:47 +0000 (14:43 +0000)]
firmware-utils: allow mkfwimage2 to use - in partition names

Signed-off-by: Roman Yeryomin <>
SVN-Revision: 47975

4 years agodnsmasq: Add option --no-ping
John Crispin [Wed, 23 Dec 2015 14:43:41 +0000 (14:43 +0000)]
dnsmasq: Add option --no-ping

By default dnsmasq sends an ICMP echo request before allocating
an IP address to a host; the uci option noping allows to disable
this check.

Signed-off-by: Hans Dedecker <>
SVN-Revision: 47974

4 years agoar71xx: Add support for AirTight Networks C-55
John Crispin [Wed, 23 Dec 2015 14:43:35 +0000 (14:43 +0000)]
ar71xx: Add support for AirTight Networks C-55

This patch is to add support for the AirTight Networks C-55 Access Point

Signed-off-by: Chris R Blake <>
SVN-Revision: 47973

4 years agorb532: switch to 4.1
John Crispin [Wed, 23 Dec 2015 14:43:11 +0000 (14:43 +0000)]
rb532: switch to 4.1

Signed-off-by: Roman Yeryomin <>
SVN-Revision: 47972

4 years agorb532: build squashfs image by default
John Crispin [Wed, 23 Dec 2015 14:43:05 +0000 (14:43 +0000)]
rb532: build squashfs image by default

Signed-off-by: Roman Yeryomin <>
SVN-Revision: 47971

4 years agorb532: increase kernel partition
John Crispin [Wed, 23 Dec 2015 14:42:59 +0000 (14:42 +0000)]
rb532: increase kernel partition

4.1 got little bit larger than 4MB and I couldn't get lzma loader
working on this platform

Signed-off-by: Roman Yeryomin <>
SVN-Revision: 47970

4 years agolantiq: Configure LED polarity for TDW8970 and TDW8980.
John Crispin [Wed, 23 Dec 2015 14:42:25 +0000 (14:42 +0000)]
lantiq: Configure LED polarity for TDW8970 and TDW8980.

This patch configures the correct ath9k WLAN LED polarity for the TDW8970,
and for the TDW8980 as well.

Signed-off-by: Vittorio Gambaletta <>
SVN-Revision: 47969

4 years agokernel: make kmod-thermal dependency conditional to match upstream kernel module...
Felix Fietkau [Wed, 23 Dec 2015 11:43:18 +0000 (11:43 +0000)]
kernel: make kmod-thermal dependency conditional to match upstream kernel module configuration dependency for hwmon-pwmfan

Signed-off-by: Sebastian Careba <>
SVN-Revision: 47968

4 years agokernel: add remaining kernel patch accidentally left out of r47963
Felix Fietkau [Wed, 23 Dec 2015 11:40:53 +0000 (11:40 +0000)]
kernel: add remaining kernel patch accidentally left out of r47963

Signed-off-by: Felix Fietkau <>
SVN-Revision: 47966

4 years agogcc: remove v4.6 relicts
Felix Fietkau [Wed, 23 Dec 2015 11:23:19 +0000 (11:23 +0000)]
gcc: remove v4.6 relicts

Fixes: commit f17e56eff5b9 ("gcc: remove version 4.6, it is no longer needed")

CC: Felix Fietkau <>
Signed-off-by: Sedat Dilek <>
SVN-Revision: 47965

4 years agokernel: backport all current pppoe kernel fixes to 3.18
Felix Fietkau [Wed, 23 Dec 2015 11:15:02 +0000 (11:15 +0000)]
kernel: backport all current pppoe kernel fixes to 3.18

Signed-off-by: Felix Fietkau <>
SVN-Revision: 47963

4 years agoledtrig-netdev: update base driver instead of patching it for every kernel
Rafał Miłecki [Wed, 23 Dec 2015 10:17:09 +0000 (10:17 +0000)]
ledtrig-netdev: update base driver instead of patching it for every kernel

All supported kernels require patching ledtrig-netdev in the same way,
so it's safe to just move these changes to the base version of this
driver. We needed these patches for some old kernels 2.6.36 and 3.11.

Signed-off-by: Rafał Miłecki <>
SVN-Revision: 47962

4 years agokernel: make kmod-thermal dependency conditional to match upstream kernel module...
Felix Fietkau [Tue, 22 Dec 2015 19:05:35 +0000 (19:05 +0000)]
kernel: make kmod-thermal dependency conditional to match upstream kernel module configuration dependency

Signed-off-by: Felix Fietkau <>
SVN-Revision: 47961

4 years agokernel: make kmod-gpiofan depend on kmod-thermal to fix build errors
Felix Fietkau [Tue, 22 Dec 2015 16:58:45 +0000 (16:58 +0000)]
kernel: make kmod-gpiofan depend on kmod-thermal to fix build errors

Signed-off-by: Felix Fietkau <>
SVN-Revision: 47960

4 years agopackages: bump uboot-sunxi to enable H3 support
Zoltan Herpai [Tue, 22 Dec 2015 13:04:31 +0000 (13:04 +0000)]
packages: bump uboot-sunxi to enable H3 support

Signed-off-by: Zoltan HERPAI <>
SVN-Revision: 47959

4 years agomac80211: merge a fix for a ps-poll handling issue
Felix Fietkau [Sun, 20 Dec 2015 21:28:30 +0000 (21:28 +0000)]
mac80211: merge a fix for a ps-poll handling issue

Signed-off-by: Felix Fietkau <>
SVN-Revision: 47958

4 years agokernel/4.4: add missing config options
Zoltan Herpai [Sun, 20 Dec 2015 18:19:45 +0000 (18:19 +0000)]
kernel/4.4: add missing config options

Signed-off-by: Zoltan HERPAI <>
SVN-Revision: 47957

4 years agoar8216: rework/fix AR8337 MAC swap handling
Felix Fietkau [Sun, 20 Dec 2015 14:25:45 +0000 (14:25 +0000)]
ar8216: rework/fix AR8337 MAC swap handling

In r45970 the MAC swap handling was made opt-in, however some boards
have been forgotten during the conversion. Since the reference design
uses this MAC swapping, and pretty much all known boards using this chip
seem to do so too, enabling the swapping is a more reasonable default
than leaving it disabled.

Change the code to still allow boards to opt-out of this.

Signed-off-by: Felix Fietkau <>
SVN-Revision: 47956

4 years agomwlwifi: upgrade to
Imre Kaloz [Sun, 20 Dec 2015 12:49:03 +0000 (12:49 +0000)]
mwlwifi: upgrade to

Signed-off-by: Imre Kaloz <>
SVN-Revision: 47954

4 years agodnsmasq: changed option nonwildcard to --bind-dynamic
Felix Fietkau [Sat, 19 Dec 2015 13:18:26 +0000 (13:18 +0000)]
dnsmasq: changed option nonwildcard to --bind-dynamic

Changed option nonwildcard from --bind-interfaces into --bind-dynamic.
With this, Dnsmasq binds the address of individual interfaces, allowing multiple
dnsmasq instances, but if new interfaces or addresses appear, it automatically
listens on those. This makes dynamically created interfaces work in the same way as
the default, but allows also use of other DNS-servers (like Named) at the same time
on diffirent interfaces where Dnsmasq is NOT configured, whereas with
--bind-interfaces will still reserve every interface even if not used and thus
disallowing use of any other DNS-program even on unused interfaces.

Tested-by: Vaasa Hacklab <>
Signed-off-by: Sami Olmari <>
SVN-Revision: 47953

4 years agoar71xx: Add ath79_register_m25p80_large to support >16MB SPI chips
Felix Fietkau [Sat, 19 Dec 2015 11:32:20 +0000 (11:32 +0000)]
ar71xx: Add ath79_register_m25p80_large to support >16MB SPI chips

The following patch is to add ath79_register_m25p80_large, which sets
is_flash to false to support bit banging. This is needed on some 32MB+
SPI chips, such as the S25FL256S1

Signed-off-by: Chris R Blake <>
SVN-Revision: 47952

4 years agoRevert "bzip2: extend/fix the Host/Install rule to install files"
Felix Fietkau [Sat, 19 Dec 2015 11:28:49 +0000 (11:28 +0000)]
Revert "bzip2: extend/fix the Host/Install rule to install files"

This reverts r47245.

Linking to shared libraries under $STAGING_DIR_HOST{,/usr}/lib is harmful,
as these directories aren't added to LD_LIBRARY_PATH (see r47103 for an
explanation why LD_LIBRARY_PATH is not used).

Revert to static linking; in particular, this fixes the build of the python
bz2 module on OpenSUSE and Fedora (which in turn broke the build of

Signed-off-by: Matthias Schiffer <>
SVN-Revision: 47950

4 years agobase-files: cleanup mtd_get_mac_binary hexdump
Felix Fietkau [Sat, 19 Dec 2015 11:28:42 +0000 (11:28 +0000)]
base-files: cleanup mtd_get_mac_binary hexdump

Remove usage of dd, as per request from Yousong Zhou.

Signed-off-by: Chris R Blake <>
SVN-Revision: 47949

4 years agoar71xx: scan nand ubi partition for ath9k eeprom files
Felix Fietkau [Sat, 19 Dec 2015 11:28:36 +0000 (11:28 +0000)]
ar71xx: scan nand ubi partition for ath9k eeprom files

The MR18 stores the ath9k eeprom values on the NAND.
This patch makes it possible to retrieve the images
from there.

Signed-off-by: Chris R Blake <>
SVN-Revision: 47948

4 years agoar71xx: refactor 10-ath9k-eeprom
Felix Fietkau [Sat, 19 Dec 2015 11:28:30 +0000 (11:28 +0000)]
ar71xx: refactor 10-ath9k-eeprom

move all library includes and 'firmware already exists'
check to the top of the script.

Signed-off-by: Chris R Blake <>
SVN-Revision: 47947

4 years agoar71xx: PowerCloud CR5000 openwrt configuration
Felix Fietkau [Sat, 19 Dec 2015 11:28:18 +0000 (11:28 +0000)]
ar71xx: PowerCloud CR5000 openwrt configuration

OpenWrt configuration part of support for the PowerCloud Systems
CR5000.  The CR5000 is a dual-band 802.11n wireless router with
8MB flash, 64MB RAM, (unused on stock firmware) USB 2.0 port and
five port gigabit ethernet switch.  The CR5000 was sold as
hardware for the Skydog cloud-managed router service.

Signed-off-by: Daniel Dickinson <>
SVN-Revision: 47946

4 years agoar71xx: PowerCloud CR3000 OpenWrt configuration
Felix Fietkau [Sat, 19 Dec 2015 11:28:12 +0000 (11:28 +0000)]
ar71xx: PowerCloud CR3000 OpenWrt configuration

OpenWRt configuration part of support for the PowerCloud
Systems CR3000.  The CR3000 is a 802.11n 2.4 GHz wireless router with
8MB flash, 64MB RAM, a four port gigabit ethernet switch, and a fast
ethernet wan port that was sold by PowerCloud Systems as
hardware for the Skydog cloud-managed router service.

Signed-off-by: Daniel Dickinson <>
SVN-Revision: 47945

4 years agoar71xx: PowerCloud CAP324 OpenWrt configuration
Felix Fietkau [Sat, 19 Dec 2015 11:27:59 +0000 (11:27 +0000)]
ar71xx: PowerCloud CAP324 OpenWrt configuration

Openwrt configuration part of support for PowerCloud CAP324
Cloud AP.  The CAP324 Cloud AP is a device sold by PowerCloud Systems
who's stock firmware (CloudCommand) provides 'cloud' based managment
of large numbers access points.

The CAP324 is a dual-band 802.11n wireless access point with 16MB flash
and 128MB RAM and single gigabit ethernet port.  It can be powered via PoE
or a wall wart.

Signed-off-by: Daniel Dickinson <>
SVN-Revision: 47944

4 years agoar71xx: Image generation for PowerCloud CR5000 Cloud Router
Felix Fietkau [Sat, 19 Dec 2015 11:27:52 +0000 (11:27 +0000)]
ar71xx: Image generation for PowerCloud CR5000 Cloud Router

Kernel part of support for the PowerCloud Systems CR5000.  The
CR5000 is a dual-band 802.11n wireless router with 8MB flash,
64 MB RAM, (unused in stock firmware) USB 2.0 port, and five
port gigabit ethernet switch.  The CR5000 was sold as hardware for
the Skydog cloud-managed router service.

Signed-off-by: Daniel Dickinson <>
SVN-Revision: 47943

4 years agoar71xx: Image generation for PowerCloud CR3000 Cloud Router
Felix Fietkau [Sat, 19 Dec 2015 11:27:45 +0000 (11:27 +0000)]
ar71xx: Image generation for PowerCloud CR3000 Cloud Router

Image generation part of support for PowerCloud CR3000.  The CR3000 is
a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM,
a four port fast ethernet switch, and a fast ethernet wan port which
was sold by PowerCloud Systems as hardware for the Skydog
cloud-managed router service.

Signed-off-by: Daniel Dickinson <>
SVN-Revision: 47942

4 years agoar71xx: PowerCloud CAP324 image generation
Felix Fietkau [Sat, 19 Dec 2015 11:27:39 +0000 (11:27 +0000)]
ar71xx: PowerCloud CAP324 image generation

Image generation (and mtd partition) part of support for
PowerCloud CAP324 Cloud AP. The CAP324 Cloud AP is a device sold by
PowerCloud Systems who's stock firmware (CloudCommand) provides
'cloud' based managment of large numbers of access points.

The CAP324 is a dual-band 802.11n wireless access point with 16MB flash
and 128MB RAM and single gigabit ethernet port.  It can be powered via
PoE or a power adaptor.

Signed-off-by: Daniel Dickinson <>
SVN-Revision: 47941