openwrt/openwrt.git
4 years agoramips: change ethernet napi interrupt sequence
Felix Fietkau [Fri, 5 Jun 2015 08:59:48 +0000 (08:59 +0000)]
ramips: change ethernet napi interrupt sequence

when open device. first ready napi software rx.
then enable hardware interrupt.
final start software tx queue to send data.

Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 45894

4 years agoramips: fix ethernet vlan tx offload support check when delete
Felix Fietkau [Fri, 5 Jun 2015 08:59:42 +0000 (08:59 +0000)]
ramips: fix ethernet vlan tx offload support check when delete

Signed-off-by: michael lee <igvtee@gmail.com>
SVN-Revision: 45893

4 years agoramips: fix the memory map on FireWRT
Felix Fietkau [Fri, 5 Jun 2015 08:07:41 +0000 (08:07 +0000)]
ramips: fix the memory map on FireWRT

Avoid the use of memory marked as reserved

MT7621 support 512MB memory.
According to "MT7621_ProgrammingGuide_Preliminary_Platform.pdf"
0x0~0x1c000000        448MB
0x20000000~0x4000000  64MB
total 512MB

Signed-off-by: wengbj <fl.service@t-firefly.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45892

4 years agokernel: adjust mips highmem offset to avoid the need for -mlong-calls on systems...
Felix Fietkau [Fri, 5 Jun 2015 08:07:35 +0000 (08:07 +0000)]
kernel: adjust mips highmem offset to avoid the need for -mlong-calls on systems with >256M RAM

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45891

4 years agoramips: use highmem on the FireWRT board
Felix Fietkau [Thu, 4 Jun 2015 21:45:24 +0000 (21:45 +0000)]
ramips: use highmem on the FireWRT board

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45890

4 years agoramips: enable highmem support for mt7621
Felix Fietkau [Thu, 4 Jun 2015 21:45:12 +0000 (21:45 +0000)]
ramips: enable highmem support for mt7621

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45889

4 years agoramips: remove prompt of the USB_MT7621_XHCI_PLATFORM symbol to avoid issues with...
Felix Fietkau [Thu, 4 Jun 2015 21:45:01 +0000 (21:45 +0000)]
ramips: remove prompt of the USB_MT7621_XHCI_PLATFORM symbol to avoid issues with kernel_menuconfig

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45888

4 years agogmp: disable assembly to fix build on systems that use PIE binaries
Felix Fietkau [Thu, 4 Jun 2015 21:44:52 +0000 (21:44 +0000)]
gmp: disable assembly to fix build on systems that use PIE binaries

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45887

4 years agomusl: update to version 1.1.9
Felix Fietkau [Thu, 4 Jun 2015 20:08:39 +0000 (20:08 +0000)]
musl: update to version 1.1.9

Patch to 2015-06-04 to fix ldso related regressions on PPC and MIPS.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45886

4 years agoAdd sch_fq and sch_pie to the kmod-sched package.
Steven Barth [Thu, 4 Jun 2015 05:44:44 +0000 (05:44 +0000)]
Add sch_fq and sch_pie to the kmod-sched package.

These are two new packet schedulers introduced in Linux 3.12 and 3.14
respectively. sch_fq is a perfect fairness queueing scheduler that also
adds pacing on host TCP flows, and sch_pie is an AQM.

Having them available in kmod-sched makes it easier for people to test
these new queueing schemes.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
SVN-Revision: 45885

4 years agolldpd: add option to disable custom TLVs
John Crispin [Wed, 3 Jun 2015 13:59:14 +0000 (13:59 +0000)]
lldpd: add option to disable custom TLVs

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 45884

4 years agoprocd: work around a event race
John Crispin [Wed, 3 Jun 2015 13:59:08 +0000 (13:59 +0000)]
procd: work around a event race

there is a conceptual design flaw in our interface events. workaround this by
disabling duplicate message supression in procd. we need to fix this properly
for the next release

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45883

4 years agolantiq: Make the CRC32 poly value configurable per device
John Crispin [Wed, 3 Jun 2015 13:58:57 +0000 (13:58 +0000)]
lantiq: Make the CRC32 poly value configurable per device

This also adds the old hardcoded value to the VGV7519BRN profile to make
sure that images are still generated correctly.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 45882

4 years agotools/firmware-utils: Allow changing the CRC32 poly value in mkbrnimg
John Crispin [Wed, 3 Jun 2015 13:58:48 +0000 (13:58 +0000)]
tools/firmware-utils: Allow changing the CRC32 poly value in mkbrnimg

VGV7519 is currently the only device with brnboot support. It seems to
be happy with 0x2083b8ed as CRC32 poly. However, VGV7510KW22 fails to
validate the checksum - it requires 0x04c11db7 instead.

I have built an brnboot image manually on the command line, once with
the old code and then with the new code but passing the old CRC32
poly value. Both resulted in a brnboot image with the same sha1sum.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 45881

4 years agoipq806x: missing symbol
John Crispin [Wed, 3 Jun 2015 13:58:30 +0000 (13:58 +0000)]
ipq806x: missing symbol

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45880

4 years agoRevert "musl: update to version 1.1.9" (r45754)
Felix Fietkau [Wed, 3 Jun 2015 00:22:51 +0000 (00:22 +0000)]
Revert "musl: update to version 1.1.9" (r45754)

The current version seems to be broken on MIPS.

SVN-Revision: 45879

4 years agoncurses: Fix building with gcc 5.1
Hauke Mehrtens [Tue, 2 Jun 2015 21:54:54 +0000 (21:54 +0000)]
ncurses: Fix building with gcc 5.1

This patch is taken from the gentoo guys who extracted this from a large
upstream commit (with many unrelated changes).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 45878

4 years agokernel: add broadcom phy driver
Hauke Mehrtens [Tue, 2 Jun 2015 20:01:21 +0000 (20:01 +0000)]
kernel: add broadcom phy driver

This adds the Broadcom phy driver.
This also loses #19545.
Thank you bigtman43

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 45877

4 years agoprocd: add a 10 second delay to the interface triggers
John Crispin [Tue, 2 Jun 2015 12:03:20 +0000 (12:03 +0000)]
procd: add a 10 second delay to the interface triggers

this is an ugly hack that will be removed when the netifd maintainers
have time to look at the problem.

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45876

4 years agobrcm63xx: fix livebox image generation
Jonas Gorski [Tue, 2 Jun 2015 10:23:45 +0000 (10:23 +0000)]
brcm63xx: fix livebox image generation

Livebox does need the uncompressed kernel, so just create it during
image generation.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45875

4 years agoath9k: fix an issue with stopping rx/tx dma on AR93xx
Felix Fietkau [Tue, 2 Jun 2015 08:47:21 +0000 (08:47 +0000)]
ath9k: fix an issue with stopping rx/tx dma on AR93xx

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45874

4 years agohostapd: add a new option to control HT coexistance separate from noscan
Felix Fietkau [Tue, 2 Jun 2015 08:39:19 +0000 (08:39 +0000)]
hostapd: add a new option to control HT coexistance separate from noscan

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45873

4 years agokernel: remove stmmac kernel package
John Crispin [Mon, 1 Jun 2015 20:11:45 +0000 (20:11 +0000)]
kernel: remove stmmac kernel package

We just moved the stmmac support in the kernel for ipq806x. Therefore,
nobody needs this driver so we'll just get rid of it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45872

4 years agoipq806x: move stmmac support in the kernel binary
John Crispin [Mon, 1 Jun 2015 20:11:35 +0000 (20:11 +0000)]
ipq806x: move stmmac support in the kernel binary

Ethernet GMAC is built-in the SoC, so there is no need to enable it as a
module. We'll just assume we need it. That's what is done for other
platform where this driver is used so it'll make things more consistent.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45871

4 years agoinclude: image.mk: ensure that $(KDIR)/tmp exists in the IB case as well
Jo-Philipp Wich [Mon, 1 Jun 2015 18:00:35 +0000 (18:00 +0000)]
include: image.mk: ensure that $(KDIR)/tmp exists in the IB case as well

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45870

4 years agobrcm63xx: delete uncompressed kernels after use
Jonas Gorski [Mon, 1 Jun 2015 12:37:34 +0000 (12:37 +0000)]
brcm63xx: delete uncompressed kernels after use

Delete the dtb appended, uncompressed kernels after having compressed
them, so they don't end in the image builder.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45869

4 years agolantiq: fix VG3503J rootfs offset
Jonas Gorski [Mon, 1 Jun 2015 12:37:24 +0000 (12:37 +0000)]
lantiq: fix VG3503J rootfs offset

In r44391 the kernel partion size was increased to allow larger kernels,
but the rootfs partition offset was missed. Fix this by setting the
rootfs offset to the expected value.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45868

4 years agoodhcp6c: silence fw3 warnings
Steven Barth [Mon, 1 Jun 2015 08:31:13 +0000 (08:31 +0000)]
odhcp6c: silence fw3 warnings

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45867

4 years agoimagebuilder: create cache directory if needed (#18629)
Jo-Philipp Wich [Mon, 1 Jun 2015 06:15:39 +0000 (06:15 +0000)]
imagebuilder: create cache directory if needed (#18629)

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45866

4 years agokernel: backport ssb fix for WRT350N v1 (BCM4705) reboots
Rafał Miłecki [Mon, 1 Jun 2015 06:11:26 +0000 (06:11 +0000)]
kernel: backport ssb fix for WRT350N v1 (BCM4705) reboots

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45865

4 years agoau1000: add a missing dependency to the pcmcia module
John Crispin [Mon, 1 Jun 2015 06:03:52 +0000 (06:03 +0000)]
au1000: add a missing dependency to the pcmcia module

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45864

4 years agoiwinfo: fix segfault in mtd parsing code (#19768)
Jo-Philipp Wich [Mon, 1 Jun 2015 04:31:45 +0000 (04:31 +0000)]
iwinfo: fix segfault in mtd parsing code (#19768)

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45863

4 years agokernel: bluetooth: Add dependency to kmod-crypto-ecb
John Crispin [Sun, 31 May 2015 17:46:24 +0000 (17:46 +0000)]
kernel: bluetooth: Add dependency to kmod-crypto-ecb

Add dependency of kmod-crypto-ecb to kmod-bluetooth to avoid the kernel warning
"Bluetooth: Unable to create crypto context".

Signed-off-by: Bruno Randolf <br1@einfach.org>
SVN-Revision: 45860

4 years agolldpd: disable xml explicitly
John Crispin [Sun, 31 May 2015 17:46:09 +0000 (17:46 +0000)]
lldpd: disable xml explicitly

This prevents auto-detection of libxml2 and thus the error:
Package lldpd is missing dependencies for the following libraries:
libxml2.so.2

Preventing a dependency to libxml2 is preferred, since libxml2
would be a out-of-(core-)tree dependency.

Reported-by: Buildbot
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 45859

4 years agoca-certificates: update to version 20150426
John Crispin [Sun, 31 May 2015 17:45:54 +0000 (17:45 +0000)]
ca-certificates: update to version 20150426

update to version 20150426

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
SVN-Revision: 45858

4 years agomalta: add default network configuration
John Crispin [Sun, 31 May 2015 17:45:43 +0000 (17:45 +0000)]
malta: add default network configuration

I didn't figure out how to achieve this using uci-defaults-new.sh,
so use old-school uci-defaults script as that's what is used on
realview as well.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45857

4 years agomac80211: make netifd script create AP interface directly
Felix Fietkau [Sat, 30 May 2015 23:08:57 +0000 (23:08 +0000)]
mac80211: make netifd script create AP interface directly

Before starting hostapd we create interface for it. The problem is we
try to create STA interface just to let hostapd change it to AP later.

It may fail if device doesn't support STA interfaces or if we already
hit a limit. Consider following phy (it's from BCM43602 and brcmfmac):
$ iw phy phy0 info | tail
        valid interface combinations:
                 * #{ IBSS, managed } <= 1, #{ AP } <= 4, #{ P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1,
                   total <= 3, #channels <= 1

Trying to setup 2 interfaces: STA + AP results in:
radio0 (1101): command failed: Operation not supported (-95)
radio0 (1101): command failed: Operation not supported (-95)
radio0 (1101): command failed: Operation not supported (-95)
radio0 (1101): command failed: Operation not supported (-95)
radio0 (1101): Configuration file: /var/run/hostapd-phy0.conf
radio0 (1101): Could not read interface wlan0-1 flags: No such device

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45856

4 years agoar71xx: use Image/BuildLoaderPatched for TPLINK-SAFELOADER images
Felix Fietkau [Sat, 30 May 2015 22:55:50 +0000 (22:55 +0000)]
ar71xx: use Image/BuildLoaderPatched for TPLINK-SAFELOADER images

Building the loader in Image/Build/TPLINK-SAFELOADER would break the image
builder as no target compiler is available in that stage.

Fixes #19580

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45855

4 years agoar71xx: add Image/BuildLoaderPatched macro
Felix Fietkau [Sat, 30 May 2015 22:55:40 +0000 (22:55 +0000)]
ar71xx: add Image/BuildLoaderPatched macro

In contrast to Image/BuildLoader, Image/BuildLoaderPatched first patches the
kernel command line in the image and then builds the loader without command
line. This allows building loaders for systems which don't boot correctly when
the kernel command line is provided by the loader (like the TP-LINK CPE series).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45854

4 years agouhttpd: use 307 for HTTPS redirections to retain request method
Jo-Philipp Wich [Sat, 30 May 2015 21:14:33 +0000 (21:14 +0000)]
uhttpd: use 307 for HTTPS redirections to retain request method

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45853

4 years agouhttpd: add support for enforcing https
Jo-Philipp Wich [Sat, 30 May 2015 20:55:14 +0000 (20:55 +0000)]
uhttpd: add support for enforcing https

Also set HTTPS environment variable for CGI programs on SSL connections.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45852

4 years agolantiq: fix imagebuilder
John Crispin [Sat, 30 May 2015 20:28:57 +0000 (20:28 +0000)]
lantiq: fix imagebuilder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45851

4 years agouhttpd: inhibit chunked transfer encoding for static file responses
Jo-Philipp Wich [Sat, 30 May 2015 14:05:40 +0000 (14:05 +0000)]
uhttpd: inhibit chunked transfer encoding for static file responses

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45850

4 years agokernel: kmod-stmmac depends on kmod-libphy
Jo-Philipp Wich [Sat, 30 May 2015 13:57:54 +0000 (13:57 +0000)]
kernel: kmod-stmmac depends on kmod-libphy

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45849

4 years agokernel: upstream fix: mount overlayfs r/o if workdir cannot be created
John Crispin [Sat, 30 May 2015 13:16:23 +0000 (13:16 +0000)]
kernel: upstream fix: mount overlayfs r/o if workdir cannot be created

move the patch to the proper folder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45848

4 years agoramips: fix swapped colors for router LED on WHR-1166D (thx, Björn)
Felix Fietkau [Sat, 30 May 2015 09:39:37 +0000 (09:39 +0000)]
ramips: fix swapped colors for router LED on WHR-1166D (thx, Björn)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45847

4 years agoramips: rename status led to wifi on WHR-300HP2, WHR-1166D, WHR-600D
Felix Fietkau [Sat, 30 May 2015 09:01:41 +0000 (09:01 +0000)]
ramips: rename status led to wifi on WHR-300HP2, WHR-1166D, WHR-600D

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45846

4 years agoramips: fix buttons on WHR-300HP2, WHR-1166D, WHR-600D
Felix Fietkau [Fri, 29 May 2015 22:42:32 +0000 (22:42 +0000)]
ramips: fix buttons on WHR-300HP2, WHR-1166D, WHR-600D

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45845

4 years agoramips: extract MAC address on WHR-300HP2, WHR-1166D, WHR-600D
Felix Fietkau [Fri, 29 May 2015 21:42:06 +0000 (21:42 +0000)]
ramips: extract MAC address on WHR-300HP2, WHR-1166D, WHR-600D

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45844

4 years agoramips: fix partition layout of WHR-300HP2, WHR-1166D, WHR-600D
Felix Fietkau [Fri, 29 May 2015 21:25:23 +0000 (21:25 +0000)]
ramips: fix partition layout of WHR-300HP2, WHR-1166D, WHR-600D

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45843

4 years agoramips: implement sysupgrade support for whr-300hp2
Felix Fietkau [Fri, 29 May 2015 21:13:28 +0000 (21:13 +0000)]
ramips: implement sysupgrade support for whr-300hp2

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45842

4 years agouboot-omap: allow generating dummy ipks, fixes omap imagebuilder
Jo-Philipp Wich [Fri, 29 May 2015 15:08:29 +0000 (15:08 +0000)]
uboot-omap: allow generating dummy ipks, fixes omap imagebuilder

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45841

4 years agoixp4xx: use usb-*-pci where appropriate
Jonas Gorski [Fri, 29 May 2015 14:39:12 +0000 (14:39 +0000)]
ixp4xx: use usb-*-pci where appropriate

Most boards use pci connected usb controllers, so make sure to include
the pci drivers.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45840

4 years agosunxi: correct default package selection, fixes imagebuilder
Jo-Philipp Wich [Fri, 29 May 2015 13:55:26 +0000 (13:55 +0000)]
sunxi: correct default package selection, fixes imagebuilder

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45839

4 years agoar71xx: use Image/BuildKernel/Initramfs template to fix image builder errors
Felix Fietkau [Fri, 29 May 2015 13:41:41 +0000 (13:41 +0000)]
ar71xx: use Image/BuildKernel/Initramfs template to fix image builder errors

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45838

4 years agobuild: do not call initramfs build from within the image builder
Felix Fietkau [Fri, 29 May 2015 13:41:31 +0000 (13:41 +0000)]
build: do not call initramfs build from within the image builder

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45837

4 years agobuild: in new image building code, do not rebuild kernel images in the image builder
Felix Fietkau [Fri, 29 May 2015 13:41:21 +0000 (13:41 +0000)]
build: in new image building code, do not rebuild kernel images in the image builder

Some kernel images need to be wrapped in a loader, which cannot be built
without a working toolchain.
Also, this speeds up the image builder run.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45836

4 years agobuild: store initramfs kernels in $(KDIR)/tmp - prevents them from being included...
Felix Fietkau [Fri, 29 May 2015 13:41:02 +0000 (13:41 +0000)]
build: store initramfs kernels in $(KDIR)/tmp - prevents them from being included in the image builder tarball

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45835

4 years agobuild: store firmware images in $(KDIR)/tmp - prevents them from being included in...
Felix Fietkau [Fri, 29 May 2015 13:40:55 +0000 (13:40 +0000)]
build: store firmware images in $(KDIR)/tmp - prevents them from being included in the image builder tarball

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45834

4 years agogeneric: mount overlayfs r/o if workdir cannot be created
John Crispin [Fri, 29 May 2015 12:36:42 +0000 (12:36 +0000)]
generic: mount overlayfs r/o if workdir cannot be created

This is the case e.g. if JFFS2 partition is full.

see: https://www.mail-archive.com/linux-unionfs@vger.kernel.org/msg00246.html
(a small error in a logmessage was changed and reported upstream)

runtime tested on ar71xx with kernel 3.18.11 and r45772
this paritially fixes #19564

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
Acked-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45833

4 years agoqca-nss-gmac: delete package
John Crispin [Fri, 29 May 2015 12:26:07 +0000 (12:26 +0000)]
qca-nss-gmac: delete package

nss-gmac has been replaced by its upstream counterpart "stmmac", to
which we added the SoC glue layer required for it to run on IPQ806x.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45832

4 years agoipq806x: replace caf nss-gmac driver by upstream stmmac
John Crispin [Fri, 29 May 2015 12:26:01 +0000 (12:26 +0000)]
ipq806x: replace caf nss-gmac driver by upstream stmmac

This driver has been cherry-picked and backported from the following
LKML thread:
*https://lkml.org/lkml/2015/5/26/744

It also updates the DT accordingly.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45831

4 years agoipq806x: enable kernel support for Fixed PHY emulation
John Crispin [Fri, 29 May 2015 12:25:44 +0000 (12:25 +0000)]
ipq806x: enable kernel support for Fixed PHY emulation

Most ipq806x platforms use an ethernet switch, and the new upstream
GMAC driver makes use of the Fixed PHY emulation to force the link
settings despite the lack of PHY.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45830

4 years agokernel: add stmmac as a new kernel package
John Crispin [Fri, 29 May 2015 12:25:34 +0000 (12:25 +0000)]
kernel: add stmmac as a new kernel package

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45829

4 years agokernel: add missing STMMAC options in generic configs
John Crispin [Fri, 29 May 2015 12:25:29 +0000 (12:25 +0000)]
kernel: add missing STMMAC options in generic configs

STMMAC_PLATFORM and STMMAC_PCI have been added recently in the kernel,
but show up only when STMMAC driver is enabled. So se'll add it in the
generic config, so the kernel build doesn't stall whenever we enable
this driver.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45828

4 years agoipq806x: move arm-gic include into pcie patch
John Crispin [Fri, 29 May 2015 12:25:15 +0000 (12:25 +0000)]
ipq806x: move arm-gic include into pcie patch

This include is necessary starting at the PCIe patch, which has a lower
number. So in order to keep the patches consistent, we'll move the
arm-gic include in the first patch who needs it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45827

4 years agoixp4xx: fix imagebuilder
John Crispin [Fri, 29 May 2015 12:20:39 +0000 (12:20 +0000)]
ixp4xx: fix imagebuilder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45826

4 years agokernel: fix kmod-k10temp target dependencies
Jo-Philipp Wich [Fri, 29 May 2015 12:03:00 +0000 (12:03 +0000)]
kernel: fix kmod-k10temp target dependencies

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45825

4 years agobrcm2708: fix imagebuilder
John Crispin [Fri, 29 May 2015 11:28:54 +0000 (11:28 +0000)]
brcm2708: fix imagebuilder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45824

4 years agoipq806x: fix imagebuilder
John Crispin [Fri, 29 May 2015 11:28:44 +0000 (11:28 +0000)]
ipq806x: fix imagebuilder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45823

4 years agogemini: fix imagebuilder
John Crispin [Fri, 29 May 2015 11:28:33 +0000 (11:28 +0000)]
gemini: fix imagebuilder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45822

4 years agoocteon: fix imagebuilder
John Crispin [Fri, 29 May 2015 11:28:20 +0000 (11:28 +0000)]
octeon: fix imagebuilder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45821

4 years agoramips: fix imagebuilder
John Crispin [Fri, 29 May 2015 11:28:10 +0000 (11:28 +0000)]
ramips: fix imagebuilder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45820

4 years agoau1000/au1550: fix profile package list
Jo-Philipp Wich [Fri, 29 May 2015 11:04:04 +0000 (11:04 +0000)]
au1000/au1550: fix profile package list

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45819

4 years agoau1000/au1550: enable pcmcia support flag
Jo-Philipp Wich [Fri, 29 May 2015 11:03:59 +0000 (11:03 +0000)]
au1000/au1550: enable pcmcia support flag

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45818

4 years agoau1000: fix kmod-pcmcia-au1000
Jo-Philipp Wich [Fri, 29 May 2015 11:03:55 +0000 (11:03 +0000)]
au1000: fix kmod-pcmcia-au1000

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45817

4 years agokernel: fix usb-ohci-pci description define
Jonas Gorski [Fri, 29 May 2015 10:20:50 +0000 (10:20 +0000)]
kernel: fix usb-ohci-pci description define

Copy paste error left defining usb2-pci again.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45816

4 years agomxs: fix imagebuilder
Jo-Philipp Wich [Fri, 29 May 2015 08:42:50 +0000 (08:42 +0000)]
mxs: fix imagebuilder

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45815

4 years agox86/64: add e1000e to the default packages
Jo-Philipp Wich [Fri, 29 May 2015 08:20:58 +0000 (08:20 +0000)]
x86/64: add e1000e to the default packages

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45814

4 years agobase-files: remove ubi tool
Luka Perkov [Fri, 29 May 2015 08:14:38 +0000 (08:14 +0000)]
base-files: remove ubi tool

ubi tool was removed from fstools in r41128.

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45813

4 years agomac80211: backport one missed brcmfmac NVRAM-related patch
Rafał Miłecki [Thu, 28 May 2015 20:57:23 +0000 (20:57 +0000)]
mac80211: backport one missed brcmfmac NVRAM-related patch

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45812

4 years agobrcm47xx: image: fix typo in Asus WL-500gP v2 fw file name
Rafał Miłecki [Thu, 28 May 2015 19:53:59 +0000 (19:53 +0000)]
brcm47xx: image: fix typo in Asus WL-500gP v2 fw file name

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45811

4 years agolldpd: update to v0.7.15 and add support for parsing /etc/openwrt_release
Jo-Philipp Wich [Thu, 28 May 2015 16:19:38 +0000 (16:19 +0000)]
lldpd: update to v0.7.15 and add support for parsing /etc/openwrt_release

Also drop superseded patches.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45810

4 years agoau1000: use srecimage.pl instead of objcopy, fixes imagebuilder
Jo-Philipp Wich [Thu, 28 May 2015 15:54:01 +0000 (15:54 +0000)]
au1000: use srecimage.pl instead of objcopy, fixes imagebuilder

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45809

4 years agoscripts: add srecimage.pl, a script to convert binaries to SREC format
Jo-Philipp Wich [Thu, 28 May 2015 15:53:55 +0000 (15:53 +0000)]
scripts: add srecimage.pl, a script to convert binaries to SREC format

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45808

4 years agoar7: fix imagebuilder
Jo-Philipp Wich [Thu, 28 May 2015 13:45:33 +0000 (13:45 +0000)]
ar7: fix imagebuilder

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45807

4 years agoat91: fix imagebuilder
Jo-Philipp Wich [Thu, 28 May 2015 13:25:21 +0000 (13:25 +0000)]
at91: fix imagebuilder

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45806

4 years agoxburst: fix imagebuilder
Jo-Philipp Wich [Thu, 28 May 2015 12:25:45 +0000 (12:25 +0000)]
xburst: fix imagebuilder

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45805

4 years agomalta: fix imagebuilder
Jo-Philipp Wich [Thu, 28 May 2015 12:05:57 +0000 (12:05 +0000)]
malta: fix imagebuilder

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45804

4 years agoscripts/arm-magic.sh: make the generated kernels also include $IMG_PREFIX
Jonas Gorski [Thu, 28 May 2015 10:48:23 +0000 (10:48 +0000)]
scripts/arm-magic.sh: make the generated kernels also include $IMG_PREFIX

In r45785 ixp4xx was changed to use a common image prefix also for
kernels, but the script creating them was not updated to generate the
expected filenames.
Fix this by letting arm-magic.sh respect $IMG_PREFIX for the output
kernel file names as well.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45803

4 years agomac80211: backport today's brcmfmac changes
Rafał Miłecki [Thu, 28 May 2015 10:39:11 +0000 (10:39 +0000)]
mac80211: backport today's brcmfmac changes

This fixes various problems with parsing platform NVRAM. It's required
to get BCM43602 working in most cases.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45802

4 years agoinclude: remove lvm2 from nas package collection
Jo-Philipp Wich [Thu, 28 May 2015 09:58:09 +0000 (09:58 +0000)]
include: remove lvm2 from nas package collection

Since lvm2 is only available in feeds we must not include it by default.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45801

4 years agoIB: make CONFIG_IB_STANDALONE the default
Jo-Philipp Wich [Thu, 28 May 2015 09:51:38 +0000 (09:51 +0000)]
IB: make CONFIG_IB_STANDALONE the default

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45800

4 years agofeeds: use common macro "FeedSourcesAppend" to populate opkg configurations
Jo-Philipp Wich [Thu, 28 May 2015 09:47:37 +0000 (09:47 +0000)]
feeds: use common macro "FeedSourcesAppend" to populate opkg configurations

This introduces a common macro to assemble the correct url templates to
avoid code duplication and have the feed config handling in a central place.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45799

4 years agoadm5120: fix subtarget dependency for kmod-pata-rb153-cf
Felix Fietkau [Thu, 28 May 2015 09:06:28 +0000 (09:06 +0000)]
adm5120: fix subtarget dependency for kmod-pata-rb153-cf

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45798

4 years agobrcm47xx: add LEDs/buttos for Asus N10U
Rafał Miłecki [Thu, 28 May 2015 08:08:17 +0000 (08:08 +0000)]
brcm47xx: add LEDs/buttos for Asus N10U

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45797

4 years agobrcm47xx: drop 4.0 patch that is in 4.0.4
Rafał Miłecki [Thu, 28 May 2015 08:08:11 +0000 (08:08 +0000)]
brcm47xx: drop 4.0 patch that is in 4.0.4

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45796

4 years agoramips: dont set illacc to y by default
John Crispin [Wed, 27 May 2015 20:06:06 +0000 (20:06 +0000)]
ramips: dont set illacc to y by default

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45795

4 years agoipq806x: add missing symbol
John Crispin [Wed, 27 May 2015 20:05:03 +0000 (20:05 +0000)]
ipq806x: add missing symbol

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45794

4 years agoramips: diable ill_acc driver by default
John Crispin [Wed, 27 May 2015 20:02:04 +0000 (20:02 +0000)]
ramips: diable ill_acc driver by default

this treacled down via the stable tree and wandered into 3.18.14

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45793