5 years agoscripts/ add support for the MR1750
John Crispin [Mon, 14 Sep 2015 20:11:18 +0000 (20:11 +0000)]
scripts/ add support for the MR1750

Signed-off-by: Sven Eckelmann <>
SVN-Revision: 46928

5 years agoar71xx: add user-space support for the OpenMesh MR1750 board
John Crispin [Mon, 14 Sep 2015 20:11:01 +0000 (20:11 +0000)]
ar71xx: add user-space support for the OpenMesh MR1750 board

Signed-off-by: Sven Eckelmann <>
SVN-Revision: 46927

5 years agoar71xx: add kernel support for the OpenMesh MR1750 board
John Crispin [Mon, 14 Sep 2015 20:10:43 +0000 (20:10 +0000)]
ar71xx: add kernel support for the OpenMesh MR1750 board

Signed-off-by: Sven Eckelmann <>
SVN-Revision: 46926

5 years agoscripts/ Fix u-boot image md5sum check
John Crispin [Mon, 14 Sep 2015 20:10:10 +0000 (20:10 +0000)]
scripts/ Fix u-boot image md5sum check

The u-boot on Open Mesh devices checks the whole transfered image against a
md5sum. This is stored inside the option filemd5sum inside the
fwupgrade.cfg. The bootloader will not check it when this setting is
missing and could therefore write invalid images to the flash.

Signed-off-by: Sven Eckelmann <>
SVN-Revision: 46925

5 years agorealview: create sd card image for qemu
John Crispin [Mon, 14 Sep 2015 20:10:04 +0000 (20:10 +0000)]
realview: create sd card image for qemu

enables a real rootfs with custom size

use qemu with:
qemu-system-arm -M realview-pbx-a9 \
-kernel openwrt-realview-vmlinux.elf \
-nographic -m 1024M \
-sd openwrt-realview-sdcard.img \
--append "console=ttyAMA0 root=/dev/mmcblk0p1"

modified script from brcm2708 target

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 46924

5 years agorealview: enable sd card support
John Crispin [Mon, 14 Sep 2015 20:09:56 +0000 (20:09 +0000)]
realview: enable sd card support

qemu can be run with -sd <imagename>

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 46923

5 years agoar71xx: assign proper GPIO pin for Ubiquiti Nanostation models
John Crispin [Mon, 14 Sep 2015 20:09:40 +0000 (20:09 +0000)]
ar71xx: assign proper GPIO pin for Ubiquiti Nanostation models

The GPIO pins for "POE passthrough" of Ubiquiti Nanostation models are the
* Ubiquiti Nanostation M XM: Pin 8
* Ubiquiti Nanostation M XW: Pin 2

The previous definition of the pins was mixed up between XM and XW model.

Signed-off-by: Lars Kruse <>
SVN-Revision: 46922

5 years agoramips: Added WIZnet WizFi630A Platform based on Ralink RT5350
John Crispin [Mon, 14 Sep 2015 20:09:31 +0000 (20:09 +0000)]
ramips: Added WIZnet WizFi630A Platform based on Ralink RT5350

This patch is to add the WIZnet WizFi630A board as a new platform. The board is in mini pci express form factor.

Signed-off-by: Tobias Welz <>
SVN-Revision: 46921

5 years agolantiq: Update to the latest DSL driver / application versions
John Crispin [Mon, 14 Sep 2015 20:09:22 +0000 (20:09 +0000)]
lantiq: Update to the latest DSL driver / application versions

Thanks to Sylwester Petela for testing my patch (successfully on an
ADSL connection) and for pointing out some configuration mistakes.
Others (including me) have also successfully tested this extensively
on VDSL connections.

Signed-off-by: Martin Blumenstingl <>
SVN-Revision: 46920

5 years agobase-files: sysupgrade: quote source image name
John Crispin [Mon, 14 Sep 2015 20:09:06 +0000 (20:09 +0000)]
base-files: sysupgrade: quote source image name

get_image() eval a filename without quoting it, resulting in errors with
filenames containing characters that need to be escaped.
    $ sysupgrade -T -f ./cfg\(12\).tar.gz img.bin; echo $?
    Image check 'platform_check_image' failed.
    Invalid config file. Please use only .tar.gz files
    $ mv cfg\(12\).tar.gz cfg_12.tar.gz
    $ mv img\(1\).bin img.bin
    sysupgrade -T -f ./cfg_12.tar.gz img.bin; echo $?

Enclose the content of $from in double quotes.

Signed-off-by: Adrien Schildknecht <>
SVN-Revision: 46919

5 years agoramips: add support for Planex DB-WRT01
John Crispin [Mon, 14 Sep 2015 20:08:55 +0000 (20:08 +0000)]
ramips: add support for Planex DB-WRT01

This patch add support for Planex DB-WRT01. DANBOARD route on
 the MT7620A SoC with two Ethernet port and a 802.11n 2.4 GHz radio.
 DANBOARD is Cartoon character.

Signed-off-by: YuheiOKAWA <>
SVN-Revision: 46918

5 years agolantiq: get more status information from xDSL
John Crispin [Mon, 14 Sep 2015 20:08:39 +0000 (20:08 +0000)]
lantiq: get more status information from xDSL

Signed-off-by: Florian Eckert <>
Signed-off-by: Helge Mader <>
Tested-by: Martin Blumenstingl <>
Tested-by: Andre Heider <>
SVN-Revision: 46917

5 years agokernel: dwc2: Add missing config symbol definition
John Crispin [Mon, 14 Sep 2015 20:08:25 +0000 (20:08 +0000)]
kernel: dwc2: Add missing config symbol definition

DWC2 driver has config symbol CONFIG_USB_DWC2_DEBUG_PERIODIC which
should be defined for the module build.

Signed-off-by: Antti Seppälä <>
SVN-Revision: 46916

5 years agolantiq: Add AR9 compatibility bits to DWC2 driver
John Crispin [Mon, 14 Sep 2015 20:08:15 +0000 (20:08 +0000)]
lantiq: Add AR9 compatibility bits to DWC2 driver

Add AR9 DTS definition to be recognized by the DWC2 driver.

The same driver parameters can be mostly used except that some boards
seem to erroneously report OTG HNP/SRP capability of the USB HCD.
Forcing the HNP/SRP off allows these boards to work with the DWC2 as well.

Signed-off-by: Antti Seppälä <>
SVN-Revision: 46915

5 years agolantiq: Introduce DWC2 compatible DTS definitions for AR9 USB
John Crispin [Mon, 14 Sep 2015 20:08:07 +0000 (20:08 +0000)]
lantiq: Introduce DWC2 compatible DTS definitions for AR9 USB

Since the AR9 USB is very similar to the VR9 USB it too can be used with
the upstream DWC2 driver.

Here are the DTS definitions which make it compatible with the DWC2

Signed-off-by: Antti Seppälä <>
SVN-Revision: 46914

5 years agolantiq: Initialize USB on AR9 platform
John Crispin [Mon, 14 Sep 2015 20:07:23 +0000 (20:07 +0000)]
lantiq: Initialize USB on AR9 platform

Based on the ltq-hcd driver the AR9 USB can be initialized the same way
as the VR9 platform. Use the same initialization bits for both

Signed-off-by: Antti Seppälä <>
SVN-Revision: 46913

5 years agoimagebuilder: store package lists in cache directory
Jo-Philipp Wich [Mon, 14 Sep 2015 16:57:03 +0000 (16:57 +0000)]
imagebuilder: store package lists in cache directory

Force opkg to store the downloaded repository indizes into the cache
directory as well, this way the IB can be used in an offline setting
once all required files have been cached.

Signed-off-by: Jo-Philipp Wich <>
SVN-Revision: 46912

5 years agoopkg: expose lists_dir option as command line argument
Jo-Philipp Wich [Mon, 14 Sep 2015 16:56:40 +0000 (16:56 +0000)]
opkg: expose lists_dir option as command line argument

Expose the "lists_dir" configuration file option as command line
switch so that we can override it for the Image Builder environment.

Also add a more standard PKG_MAINTAINER variable while touching
the Makefile.

Signed-off-by: Jo-Philipp Wich <>
SVN-Revision: 46911

5 years agotools/make-ext4fs: prefer static linking
Jo-Philipp Wich [Mon, 14 Sep 2015 15:15:15 +0000 (15:15 +0000)]
tools/make-ext4fs: prefer static linking

Link zlib statically on Linux systems.

Signed-off-by: Jo-Philipp Wich <>
SVN-Revision: 46909

5 years agotools/mtd-utils: prefer static linking
Jo-Philipp Wich [Mon, 14 Sep 2015 14:51:07 +0000 (14:51 +0000)]
tools/mtd-utils: prefer static linking

 - Add patch for optional static linking preference
 - Prefer static linking on Linux systems
 - Enable verbose compiler messages when building with V=c

Signed-off-by: Jo-Philipp Wich <>
SVN-Revision: 46908

5 years agotools/xz: disable shared library
Jo-Philipp Wich [Mon, 14 Sep 2015 14:03:21 +0000 (14:03 +0000)]
tools/xz: disable shared library

Force a static build of the xz utilities in order to avoid the dependency on a
shared which might collide with the distro version.

Signed-off-by: Jo-Philipp Wich <>
SVN-Revision: 46907

5 years agoinclude: toplevel: drop unused OPENWRTVERSION variable
Rafał Miłecki [Mon, 14 Sep 2015 07:40:40 +0000 (07:40 +0000)]
include: toplevel: drop unused OPENWRTVERSION variable

Signed-off-by: Rafał Miłecki <>
SVN-Revision: 46906

5 years agoramips: fix chunked-io support for big flash chips (#20504)
Felix Fietkau [Mon, 14 Sep 2015 06:54:15 +0000 (06:54 +0000)]
ramips: fix chunked-io support for big flash chips (#20504)

Signed-off-by: Felix Fietkau <>
SVN-Revision: 46904

5 years agomac80211/hostapd: rework 802.11w driver support selection, do not hardcode drivers...
Felix Fietkau [Mon, 14 Sep 2015 06:51:10 +0000 (06:51 +0000)]
mac80211/hostapd: rework 802.11w driver support selection, do not hardcode drivers in hostapd makefile

Signed-off-by: Felix Fietkau <>
SVN-Revision: 46903

5 years agoath10k: reduce dma burst size on newer firmware to fix crashes
Felix Fietkau [Sun, 13 Sep 2015 20:44:09 +0000 (20:44 +0000)]
ath10k: reduce dma burst size on newer firmware to fix crashes

Signed-off-by: Felix Fietkau <>
SVN-Revision: 46900

5 years agotoplevel: fix release name
Steven Barth [Sun, 13 Sep 2015 18:02:54 +0000 (18:02 +0000)]
toplevel: fix release name

Signed-off-by: Steven Barth <>
SVN-Revision: 46899

5 years agoRevert "musl: fix termios struct c_ispeed/c_ospeed field names" (accidental commit)
Felix Fietkau [Sun, 13 Sep 2015 17:39:24 +0000 (17:39 +0000)]
Revert "musl: fix termios struct c_ispeed/c_ospeed field names" (accidental commit)

SVN-Revision: 46898

5 years agogcc: fix path to powerpc musl dynamic linker with 5.2 (#20501)
Felix Fietkau [Sun, 13 Sep 2015 17:38:55 +0000 (17:38 +0000)]
gcc: fix path to powerpc musl dynamic linker with 5.2 (#20501)

Signed-off-by: Felix Fietkau <>
SVN-Revision: 46897

5 years agomusl: fix termios struct c_ispeed/c_ospeed field names
Felix Fietkau [Sun, 13 Sep 2015 17:38:49 +0000 (17:38 +0000)]
musl: fix termios struct c_ispeed/c_ospeed field names

Signed-off-by: Felix Fietkau <>
SVN-Revision: 46896

5 years agoath10k: make title for the old firmware config option more meaningful
Felix Fietkau [Sun, 13 Sep 2015 17:38:42 +0000 (17:38 +0000)]
ath10k: make title for the old firmware config option more meaningful

Signed-off-by: Felix Fietkau <>
SVN-Revision: 46895

5 years agopackages: uboot-sunxi: fix mmc transfer timeout for slow sdcards.
Zoltan Herpai [Sun, 13 Sep 2015 15:11:27 +0000 (15:11 +0000)]
packages: uboot-sunxi: fix mmc transfer timeout for slow sdcards.

This should fix a issue reported in ticket #20387.

Signed-off-by: Yousong Zhou <>
SVN-Revision: 46894

5 years agoar71xx: fix build of lzma-loader with binutils 2.25.1
Hauke Mehrtens [Sat, 12 Sep 2015 18:57:37 +0000 (18:57 +0000)]
ar71xx: fix build of lzma-loader with binutils 2.25.1

To make the lzma-loader build with binutils 2.25.1 it is needed to
remove the .MIPS.abiflags section otherwise I get the following compile

mips-openwrt-linux-musl-objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S loader loader.bin
mips-openwrt-linux-musl-objcopy: Warning: Writing section `.text' to huge (ie negative) file offset 0xffffffff80a00000.
mips-openwrt-linux-musl-objcopy:loader.bin[.text]: File truncated

This should close #20487.

Signed-off-by: Hauke Mehrtens <>
SVN-Revision: 46893

5 years agobcm53xx: add NAND flash chip description for Asus RT-AC87U
Hauke Mehrtens [Sat, 12 Sep 2015 11:10:34 +0000 (11:10 +0000)]
bcm53xx: add NAND flash chip description for Asus RT-AC87U

This should fix #20492.

Signed-off-by: Hauke Mehrtens <>
SVN-Revision: 46892

5 years agoramips: enable external amplifier for Xiaomi MiWiFi Mini
Felix Fietkau [Sat, 12 Sep 2015 10:22:41 +0000 (10:22 +0000)]
ramips: enable external amplifier for Xiaomi MiWiFi Mini

Attempt to boost the 2.4 GHz signal, currently very low.

Signed-off-by: D. Andrei Măceș <>
SVN-Revision: 46891

5 years agobase-files: fix typo in core dump pattern sysctl entry (fixes #20489)
Felix Fietkau [Sat, 12 Sep 2015 08:57:59 +0000 (08:57 +0000)]
base-files: fix typo in core dump pattern sysctl entry (fixes #20489)

Signed-off-by: Felix Fietkau <>
SVN-Revision: 46890

5 years agobcm53xx: reorder some arch patches
Rafał Miłecki [Fri, 11 Sep 2015 22:36:05 +0000 (22:36 +0000)]
bcm53xx: reorder some arch patches

This moves arch patches affecting many DTS files. Thanks to this change
we can put some ready-to-mainline patches at 300-319 and simplify
backporting process.

Signed-off-by: Rafał Miłecki <>
SVN-Revision: 46889

5 years agowpan-tools: bump to wpan-tools-0.5
Hauke Mehrtens [Fri, 11 Sep 2015 20:52:35 +0000 (20:52 +0000)]
wpan-tools: bump to wpan-tools-0.5

Signed-off-by: Varka Bhadram <>
SVN-Revision: 46888

5 years agomac80211: use wl18xx-fw-4.bin
Hauke Mehrtens [Fri, 11 Sep 2015 20:37:47 +0000 (20:37 +0000)]
mac80211: use wl18xx-fw-4.bin

The driver only supports wl18xx-fw-4.bin and does not support the old
firmware wl18xx-fw-3.bin and more.

The wl18xx-conf.bin file was removed upstream it does not fit all
devices any more, see this on how to generate one:

If someone has a config file for the common platforms with the wifi nic
OpenWrt uses please send a patch.

Signed-off-by: Hauke Mehrtens <>
SVN-Revision: 46887

5 years agomac80211: add iwlagn debug options
Hauke Mehrtens [Fri, 11 Sep 2015 20:37:23 +0000 (20:37 +0000)]
mac80211: add iwlagn debug options

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 46886

5 years agomac80211: refresh Intel firmware
Hauke Mehrtens [Fri, 11 Sep 2015 20:36:35 +0000 (20:36 +0000)]
mac80211: refresh Intel firmware

- sort firmware
- add newer firmware for Intel chipsets
- newer Intel MVM require firmware

only compile tested

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 46885

5 years agomac80211: iwlagn: enable iwlmvm
Hauke Mehrtens [Fri, 11 Sep 2015 20:36:11 +0000 (20:36 +0000)]
mac80211: iwlagn: enable iwlmvm

- reported in forums
- Intel 7260 and 3160 need IWLMVM drivers/firmware

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 46884

5 years agomac80211: update linux-firmware to 2014-09-03
Hauke Mehrtens [Fri, 11 Sep 2015 20:35:11 +0000 (20:35 +0000)]
mac80211: update linux-firmware to 2014-09-03

Signed-off-by: Dirk Neukirchen <>
[update to 2014-09-03 and change to xz]
Signed-off-by: Hauke Mehrtens <>
SVN-Revision: 46883

5 years agomac80211: rt2800-usb: enable "unknown" USB IDs
Hauke Mehrtens [Fri, 11 Sep 2015 20:31:58 +0000 (20:31 +0000)]
mac80211: rt2800-usb: enable "unknown" USB IDs

- should fix issue:
- enable support of more USB stick with rt28xx chipsets
- experimental: USB-IDs not in vendor linux driver
- experimental: "exact chipset is unknown"
- experimental: "enabling these devices may or may not work"

only compile tested

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 46882

5 years agokernel: add CONFIG_MIPS_CDMM config option
Hauke Mehrtens [Fri, 11 Sep 2015 20:31:32 +0000 (20:31 +0000)]
kernel: add CONFIG_MIPS_CDMM config option

This driver was added in kernel 4.1.

Signed-off-by: Hauke Mehrtens <>
SVN-Revision: 46881

5 years agobrcm47xx: detect Netgear R6300 V1 & support reset button
Rafał Miłecki [Fri, 11 Sep 2015 20:00:02 +0000 (20:00 +0000)]
brcm47xx: detect Netgear R6300 V1 & support reset button

It's still far from complete support.

Signed-off-by: Rafał Miłecki <>
SVN-Revision: 46880

5 years agokernel: Added missing symbols into 4.1 & 4.0 kernel default .config
Hauke Mehrtens [Fri, 11 Sep 2015 19:02:53 +0000 (19:02 +0000)]
kernel: Added missing symbols into 4.1 & 4.0 kernel default .config

As requested here #20432 I've
tried to fix the missing symbols from the specified default kernel
config files.
I ran into this problem trying to build an image for x86_64 target
with a custom kernel configuration.

Signed-off-by: Manganini Mirko <>
SVN-Revision: 46879

5 years agobrcm47xx: update to kernel 4.1
Hauke Mehrtens [Fri, 11 Sep 2015 18:52:42 +0000 (18:52 +0000)]
brcm47xx: update to kernel 4.1

This makes bcm53xx use kernel 4.1 by default now.

Signed-off-by: Hauke Mehrtens <>
SVN-Revision: 46878

5 years agobcm53xx: update to kernel 4.1
Hauke Mehrtens [Fri, 11 Sep 2015 18:52:18 +0000 (18:52 +0000)]
bcm53xx: update to kernel 4.1

This makes bcm53xx use kernel 4.1 by default now.

Signed-off-by: Hauke Mehrtens <>
SVN-Revision: 46877

5 years agotools: add tar host build, required for --sort=name which was only added in the lates...
Felix Fietkau [Fri, 11 Sep 2015 18:38:02 +0000 (18:38 +0000)]
tools: add tar host build, required for --sort=name which was only added in the latest version

Signed-off-by: Felix Fietkau <>
SVN-Revision: 46876

5 years agoscript: downlaod: change mirror for
Hauke Mehrtens [Fri, 11 Sep 2015 17:59:12 +0000 (17:59 +0000)]
script: downlaod: change mirror for now suggests a different mirror address. this one also
support IPv6 connections and was faster for me.

Signed-off-by: Hauke Mehrtens <>
SVN-Revision: 46875

5 years agobinutils: add binutils 2.25.1
Hauke Mehrtens [Fri, 11 Sep 2015 17:58:39 +0000 (17:58 +0000)]
binutils: add binutils 2.25.1

This adds binutils 2.25.1 as an option to OpenWrt.

Signed-off-by: Hauke Mehrtens <>
SVN-Revision: 46874

5 years agogcc: update gcc 5.x musl patches
Hauke Mehrtens [Fri, 11 Sep 2015 17:57:39 +0000 (17:57 +0000)]
gcc: update gcc 5.x musl patches

This replaces the musl patches for gcc with the versions which are in
gcc trunk.

Signed-off-by: Hauke Mehrtens <>
SVN-Revision: 46873

5 years agobrcm47xx: increase max image size
Hauke Mehrtens [Fri, 11 Sep 2015 17:55:28 +0000 (17:55 +0000)]
brcm47xx: increase max image size

the trx utile uses a maximum image size of 7.2MB. There are brcm47xx
devices even with serial flash with bigger flash chips, but OpenWrt was
not able to create images for these devices. This patch provides an
additional parameter which increases this limit to 32 MB. There is a
warning in the trx utile code which suggests that bigger images could
overwrite the nvram partition on some devices, but normally the program
writing the image should make sure that it is safe to write it to the

Signed-off-by: Hauke Mehrtens <>
SVN-Revision: 46872

5 years agobrcm47xx: break long lines in image Makefile
Hauke Mehrtens [Fri, 11 Sep 2015 17:54:55 +0000 (17:54 +0000)]
brcm47xx: break long lines in image Makefile

This patch changes nothing on the behaviour, it just breaks long lines
with bin/trx to make it easier to add additional parameters.

Signed-off-by: Hauke Mehrtens <>
SVN-Revision: 46871

5 years agobrcm2708: remove linux 3.18 support
Felix Fietkau [Fri, 11 Sep 2015 17:17:30 +0000 (17:17 +0000)]
brcm2708: remove linux 3.18 support

Signed-off-by: Felix Fietkau <>
SVN-Revision: 46870

5 years agolantiq: Use the BAR0 base address in the ath PCI fixup code
Felix Fietkau [Fri, 11 Sep 2015 16:35:46 +0000 (16:35 +0000)]
lantiq: Use the BAR0 base address in the ath PCI fixup code

Fixes support for AR9287 on TP-Link TD-W8980 and possibly other devices
which have an ath wifi chip at a PCI address other than 0xb8000000
(TD-W8980 for example has it's wifi chip at 0xbc000000).

Signed-off-by: Geoffrey McRae <>
Signed-off-by: Martin Blumenstingl <>
SVN-Revision: 46869

5 years agougps: fix filename to eliminate build problems
Felix Fietkau [Fri, 11 Sep 2015 16:35:32 +0000 (16:35 +0000)]
ugps: fix filename to eliminate build problems

due to ordering PKG_SOURCE_VERSION is not defined leading
to a filename "ugps-.tar.bz2"
This errors out when an older version is in the dl/ dir (or LOCALMIRROR)

fix order and use uhttpd file naming scheme to visibly include date

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 46868

5 years agobase-files: set kernel.core_pattern in sysctl.conf
Felix Fietkau [Fri, 11 Sep 2015 16:35:17 +0000 (16:35 +0000)]
base-files: set kernel.core_pattern in sysctl.conf

Move the pattern setting from netifd's service script to
/etc/sysctl.conf.  Put the timestamp component '%t' just after
executable name '%e' for more natural order from output of ls command.

Signed-off-by: Yousong Zhou <>
SVN-Revision: 46867

5 years agoutil-linux: add prlimit command.
Felix Fietkau [Fri, 11 Sep 2015 16:35:02 +0000 (16:35 +0000)]
util-linux: add prlimit command.

Signed-off-by: Yousong Zhou <>
SVN-Revision: 46866

5 years agomvsw61xx: match swconfig function names
Felix Fietkau [Fri, 11 Sep 2015 16:34:49 +0000 (16:34 +0000)]
mvsw61xx: match swconfig function names

Signed-off-by: Claudio Leite <>
SVN-Revision: 46865

5 years agomvsw61xx: use standard swconfig get_port_link
Felix Fietkau [Fri, 11 Sep 2015 16:34:35 +0000 (16:34 +0000)]
mvsw61xx: use standard swconfig get_port_link

The previous "link" and "status" functions were non-standard,
and thus less useful for parsing.

Signed-off-by: Claudio Leite <>
SVN-Revision: 46864

5 years agoipkg-build: add ogargs to outer tar/ipk
Felix Fietkau [Fri, 11 Sep 2015 16:34:22 +0000 (16:34 +0000)]
ipkg-build: add ogargs to outer tar/ipk

prevent name:uid leaks of build system

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 46863

5 years agoar71xx: Restore buildability of the AP121 target
Felix Fietkau [Fri, 11 Sep 2015 16:34:08 +0000 (16:34 +0000)]
ar71xx: Restore buildability of the AP121 target

Increase space for kernel and also introduce a 8M flash target into the

Signed-off-by: Attila Lendvai <>
SVN-Revision: 46862

5 years agohostapd: Add eapol_version config option
Felix Fietkau [Fri, 11 Sep 2015 16:33:54 +0000 (16:33 +0000)]
hostapd: Add eapol_version config option

Add eapol_version to the openwrt wireless config ssid section.
Only eapol_version=1 and 2 will get passed to hostapd, the default
in hostapd is 2.

This is only useful for really old client devices that don't
accept eapol_version=2.

Signed-off-by: Helmut Schaa <>
SVN-Revision: 46861

5 years agoopenvpn: remove __DATE__ from options output
Felix Fietkau [Fri, 11 Sep 2015 16:33:39 +0000 (16:33 +0000)]
openvpn: remove __DATE__ from options output

reported by:

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 46860

5 years agoinclude/ make tar reproducible
Felix Fietkau [Fri, 11 Sep 2015 16:33:26 +0000 (16:33 +0000)]
include/ make tar reproducible

several packages reported different file order between builds
make binutils, kmod-sched reproducible

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 46859

5 years agoyaffs2: remove __TIME__ __DATE__ macros
Felix Fietkau [Fri, 11 Sep 2015 16:33:12 +0000 (16:33 +0000)]
yaffs2: remove __TIME__ __DATE__ macros

prevent compiler errors with gcc 4.9
increase reproducibility

Signed-off-by: Dirk Neukirchen <>
SVN-Revision: 46858

5 years agoramips: Enable RTC support for PBR-M1
Felix Fietkau [Fri, 11 Sep 2015 16:32:58 +0000 (16:32 +0000)]
ramips: Enable RTC support for PBR-M1

The PBR-M1 and other upcoming MT7621 boards have RTC chips on them. The
PBR-M1 also selects the kmod-rtc-pcf8563 by default. But the module itself
will not be build because CONFIG_RTC_CLASS is currently not enabled for its

Enabling this option should fix the problem of the missing rtc device on
these boards.

Signed-off-by: Sven Eckelmann <>
SVN-Revision: 46857

5 years agoar71xx: fix ar724x clock calculation
Felix Fietkau [Fri, 11 Sep 2015 16:32:45 +0000 (16:32 +0000)]
ar71xx: fix ar724x clock calculation

According to the AR7242 datasheet section 2.8, AR724X CPUs use a 40MHz
input clock as the REF_CLK instead of 5MHz.

The correct CPU PLL calculation procedure is as follows:

This patch is compatible with the current calculation procedure with default
DIV and REF_DIV values.

Test on both AR7240, AR7241 and AR7242.

Signed-off-by: Weijie Gao <>
SVN-Revision: 46856

5 years agobrcm2708-gpu-fw: update to latest version
Felix Fietkau [Fri, 11 Sep 2015 16:32:28 +0000 (16:32 +0000)]
brcm2708-gpu-fw: update to latest version

Signed-off-by: Álvaro Fernández Rojas <>
SVN-Revision: 46855

5 years agobrcm2708: add kmod-sound-soc-raspidac3
Felix Fietkau [Fri, 11 Sep 2015 16:32:15 +0000 (16:32 +0000)]
brcm2708: add kmod-sound-soc-raspidac3

This adds support for RaspiDAC Rev.3x

Signed-off-by: Álvaro Fernández Rojas <>
SVN-Revision: 46854

5 years agobrcm2708: update 4.1 patches
Felix Fietkau [Fri, 11 Sep 2015 16:32:00 +0000 (16:32 +0000)]
brcm2708: update 4.1 patches

As usual, this patches were taken (and rebased) from

Signed-off-by: Álvaro Fernández Rojas <>
SVN-Revision: 46853

5 years agotarget: ar71xx: add support for COMFAST CF-E316N v2 board
Felix Fietkau [Fri, 11 Sep 2015 16:31:35 +0000 (16:31 +0000)]
target: ar71xx: add support for COMFAST CF-E316N v2 board

This adds full support (sans sysupgrading from vendor firmware) for the COMFAST
CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by
Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is
actively refusing to provide GPL'd sources for the OpenWrt version they ship
with the device, damn them).

Signed-off-by: Paul Fertser <>
SVN-Revision: 46852

5 years agohostapd: work around unconditional libopenssl build dependency
Felix Fietkau [Fri, 11 Sep 2015 16:31:18 +0000 (16:31 +0000)]
hostapd: work around unconditional libopenssl build dependency

As the OpenWrt build system only resolves build dependencies per directory,
all hostapd variants were causing libopenssl to be downloaded and built,
not only wpad-mesh. Fix this by applying the same workaround as in

Signed-off-by: Matthias Schiffer <>
SVN-Revision: 46851

5 years agoopkg: work around unconditional libopenssl build dependency
Felix Fietkau [Fri, 11 Sep 2015 16:31:01 +0000 (16:31 +0000)]
opkg: work around unconditional libopenssl build dependency

As the OpenWrt build system only resolves build dependencies per directory,
all opkg variants were causing libopenssl to be downloaded and built,
not only opkg-smime. Fix this by applying the same workaround as in

Signed-off-by: Matthias Schiffer <>
SVN-Revision: 46850

5 years agobase-files: change banner to Designated Driver release
Rafał Miłecki [Fri, 11 Sep 2015 08:56:37 +0000 (08:56 +0000)]
base-files: change banner to Designated Driver release

Signed-off-by: Rafał Miłecki <>
SVN-Revision: 46846

5 years agocomgt-ncm: Add possibility to choose PDP context type
Steven Barth [Fri, 11 Sep 2015 06:46:42 +0000 (06:46 +0000)]
comgt-ncm: Add possibility to choose PDP context type

By setting the option pdptype to IP, IPV6 or IPV4V6 the user can
choose the context type between IPv4, IPv6 and dual stack,
respectively. The default setting is dual stack, except if option
ipv6=0 is specified, in which case IPv4 context is the default.
This allows for an out-of-the-box IPv6 support with modems
utilizing NCM-like protocols.

While we are at it, also add commands for Sierra DirectIP modems
(currently untested), which will allow us to drop the separate
comgt-directip package (once tested and verified working).

Signed-off-by: Matti Laakso <>
SVN-Revision: 46844

5 years agouqmi: Add proper IPv6 support
Steven Barth [Fri, 11 Sep 2015 06:46:40 +0000 (06:46 +0000)]
uqmi: Add proper IPv6 support

Use the new --ip-family option to start both IPv4 and IPv6 sessions
by default. Autoconnect can't be used when starting two sessions,
so revert back to using the client IDs and packet data handles for
handling the network connection.

Some modem firmwares do not implement a RA server, therefore by
default use outband IP configuration and static addressing. Some
other firmwares report bogus IP configuration with the WDS get
current settings command. In this case inband configuration with
DHCP/RA can be optionally enabled by setting option dhcp to 1.

Per 3GPP standard a /64 prefix is served to all clients, which is
extended to LAN as specified in RFC 7278.

v2: Restrict the IPv6 gateway route source address
Signed-off-by: Matti Laakso <>
SVN-Revision: 46843

5 years agofirewall: Remove src_port from firewall.config to receive dhcpv6 replies
Steven Barth [Fri, 11 Sep 2015 06:46:35 +0000 (06:46 +0000)]
firewall: Remove src_port from firewall.config to receive dhcpv6 replies

Seems like my second try was again whitespace broken. Sorry for the noise.

Remove src_port from firewall.config to receive dhcpv6 replies. Fixes #20295.

Signed-off-by: Anselm Eberhardt <>
SVN-Revision: 46842

5 years agonetifd: update to the latest version, fixes a WDS STA mode regression caused by multi...
Felix Fietkau [Thu, 10 Sep 2015 21:00:19 +0000 (21:00 +0000)]
netifd: update to the latest version, fixes a WDS STA mode regression caused by multicast-to-unicast handling (#20466)

Signed-off-by: Felix Fietkau <>
SVN-Revision: 46841

5 years agoimagebuilder: run build prereq checks before building image to set up host commands...
Felix Fietkau [Thu, 10 Sep 2015 11:06:42 +0000 (11:06 +0000)]
imagebuilder: run build prereq checks before building image to set up host commands properly

Signed-off-by: Felix Fietkau <>
SVN-Revision: 46840

5 years agoipq806x: fix uninitialized variable usage in cpufreq-krait
Jonas Gorski [Thu, 10 Sep 2015 10:09:42 +0000 (10:09 +0000)]
ipq806x: fix uninitialized variable usage in cpufreq-krait

In krait_cpufreq_probe, both freq and max_cpu_freq are never
initialized, so the max_cpu_freq will have a random value at the end.
Fix this by properly initializing max_cpu_freq to 0 and storing the clk
frequency in freq as well, to make it similar to how it's calculated in

Fixes the following warnings:

In file included from include/linux/clk.h:16:0,
                 from drivers/cpufreq/cpufreq-krait.c:13:
drivers/cpufreq/cpufreq-krait.c: In function 'krait_cpufreq_probe':
include/linux/kernel.h:714:24: warning: 'freq' may be used uninitialized in this function [-Wmaybe-uninitialized]
  _max1 > _max2 ? _max1 : _max2; })
drivers/cpufreq/cpufreq-krait.c:217:25: note: 'freq' was declared here
  unsigned long freq_Hz, freq, max_cpu_freq;
In file included from include/linux/clk.h:16:0,
                 from drivers/cpufreq/cpufreq-krait.c:13:
include/linux/kernel.h:714:24: warning: 'max_cpu_freq' may be used uninitialized in this function [-Wmaybe-uninitialized]
  _max1 > _max2 ? _max1 : _max2; })
drivers/cpufreq/cpufreq-krait.c:217:31: note: 'max_cpu_freq' was declared here
  unsigned long freq_Hz, freq, max_cpu_freq;

Signed-off-by: Jonas Gorski <>
SVN-Revision: 46839

5 years agoipq806x: modules: fix typo in usb-dwc3-qcom dependencies
Jonas Gorski [Thu, 10 Sep 2015 10:09:36 +0000 (10:09 +0000)]
ipq806x: modules: fix typo in usb-dwc3-qcom dependencies

The phy driver has its qcom-dwc3 order switched in contrast to the usb
controller driver.

Signed-off-by: Kaspar Schleiser <>
Signed-off-by: Jonas Gorski <>
SVN-Revision: 46838

5 years agoipq806x: fix R7500 kernel generation
Jonas Gorski [Thu, 10 Sep 2015 10:09:26 +0000 (10:09 +0000)]
ipq806x: fix R7500 kernel generation

Obviously the dummy rootfs must be after the kernel (uImage), not
included in it.

Signed-off-by: Jonas Gorski <>
SVN-Revision: 46837

5 years agobusybox: lock: implement -n "Fail rather than wait"
Felix Fietkau [Wed, 9 Sep 2015 20:36:10 +0000 (20:36 +0000)]
busybox: lock: implement -n "Fail rather than wait"

lock -n is similiar to flock -n. If the lock was already taken,
fail with exit code = 1 and write error message to stderr.

if ! lock -n /tmp/foo ; then
echo lock exits.
echo lock was free. But is locked now.
> lock was free. But is locked now.
> lock exists.

Signed-off-by: Alexander Couzens <>
SVN-Revision: 46836

5 years agogeneric: Fix per interface nf_call_iptables setting
Felix Fietkau [Wed, 9 Sep 2015 18:40:15 +0000 (18:40 +0000)]
generic: Fix per interface nf_call_iptables setting

commit r30917 ("kernel: bypass all netfilter hooks if the sysctls for that
functionality have been disabled - eliminates the overhead of enabling
CONFIG_BRIDGE_NETFILTER in the kernel config") introduced an optimization
which should reduce/eliminate the overhead for traffic send over bridges on
kernels compiled with CONFIG_BRIDGE_NETFILTER=y. But this optimization
breaks the nf_call_iptables per bridge setting which is more fine grained
than the global sysctl net.bridge.bridge-nf-call-iptables setting.

A test reflecting a real world setup was created to identify if this really
eliminates the overhead and if per-bridge nf_call_iptables could be used in
some setups to increase the throughput. A Qualcomm Atheros QCA9558 based
system with one ethernet and an ath9k wifi 3x3 in HT40 mode was used.
Cables from the AP to the wifi station were used to reduce interference
problems during the tests.

The wlan interface was put in one bridge interface called br-wlan. This
bridge usually contains some more wlan interfaces. The eth0 was put in a
second bridge called br-lan. This usually contains some other privileged
wlan or mesh interfaces. Routing was added between br-lan and br-wlan.

Three kernels were tested:

 * (default) OpenWrt kernel for this device
 * (brfilter-global) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y
 * (brfilter-local)  OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y and
    without 644-bridge_optimize_netfilter_hooks.patch

The changes to the the netfilter settings of the bridge were done via:

 * (brfilter-global) /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=1
 * (brfilter-lobal) echo 1 > /sys/class/net/br-lan/bridge/nf_call_iptables
   and/or echo 1 > /sys/class/net/br-wan/bridge/nf_call_iptables

A station connected to the wlan0 (AP) interface was used to send traffic to
a PC connected via ethernet. iperf with 3 concurrent transmissions was used
to generate the traffic.

| kernel          | br-nf-* global | nf-call* iface | download | upload   |
| default         | 0              | -              |      209 |      268 |
| brfilter-global | 0              | -              |      185 |      243 |
| brfilter-local  | 0              | -              |      187 |      243 |
| brfilter-local  | 0              | br-lan         |      157 |      226 |
| brfilter-local  | 0              | br-lan br-wlan |      139 |      161 |
| brfilter-global | 1              | -              |      136 |      162 |

Download/upload results in Mibit/s

It can be seen that the patch doesn't eliminate the overhead. It can also
be seen that the throughput of brfilter-global and brfilter-local with
disabled filtering is the roughly the same. Also the throughput for
brfilter-global and brfilter-local for enabled filtering on all bridges is
roughly the same.

But also the brfilter-local throughput is higher when only br-lan requires
the filtering. This setting would not be possible with
644-bridge_optimize_netfilter_hooks.patch applied and thus can only be
compared with brfilter-global and filtering enabled for all interfaces.

Signed-off-by: Sven Eckelmann <>
SVN-Revision: 46835

5 years agolinux: make IPv6 builtin if selected (saves >30KB)
Steven Barth [Wed, 9 Sep 2015 12:20:36 +0000 (12:20 +0000)]
linux: make IPv6 builtin if selected (saves >30KB)

Signed-off-by: Steven Barth <>
SVN-Revision: 46834

5 years agobusybox: fix ip applet and netlink behavior
Steven Barth [Wed, 9 Sep 2015 10:38:16 +0000 (10:38 +0000)]
busybox: fix ip applet and netlink behavior

Signed-off-by: Steven Barth <>
SVN-Revision: 46833

5 years agopackage: replace ifconfig-usage with ip
Steven Barth [Tue, 8 Sep 2015 17:44:24 +0000 (17:44 +0000)]
package: replace ifconfig-usage with ip

Signed-off-by: Steven Barth <>
SVN-Revision: 46832

5 years agoiproute2: improve ip-full coexistence, remove rt_table
Steven Barth [Tue, 8 Sep 2015 17:44:17 +0000 (17:44 +0000)]
iproute2: improve ip-full coexistence, remove rt_table

Signed-off-by: Steven Barth <>
SVN-Revision: 46831

5 years agobase-files: add /etc/iproute2/rt_tables, replace ifconfig-usage
Steven Barth [Tue, 8 Sep 2015 17:44:13 +0000 (17:44 +0000)]
base-files: add /etc/iproute2/rt_tables, replace ifconfig-usage

Signed-off-by: Steven Barth <>
SVN-Revision: 46830

5 years agobusybox: improve applets & deprecate ifconfig, route
Steven Barth [Tue, 8 Sep 2015 17:44:10 +0000 (17:44 +0000)]
busybox: improve applets & deprecate ifconfig, route

added: ip addr, ip route, ip link, traceroute6
removed: hostid, devmem, vconfig, arping
deprecated (to be removed): ifconfig, route

Signed-off-by: Steven Barth <>
SVN-Revision: 46829

5 years agokernel: describe bridge patch "multicast to unicast"
Rafał Miłecki [Tue, 8 Sep 2015 16:43:32 +0000 (16:43 +0000)]
kernel: describe bridge patch "multicast to unicast"

It was initially added in r41367 by nbd.

SVN-Revision: 46828

5 years agokernel: describe bridge patch "optimize netfilter hooks"
Rafał Miłecki [Tue, 8 Sep 2015 16:43:21 +0000 (16:43 +0000)]
kernel: describe bridge patch "optimize netfilter hooks"

It was initially added in r30917 by nbd.

SVN-Revision: 46827

5 years agokernel: describe bridge patch "remove IPv6 depependency of bridge in 2.6.38+"
Rafał Miłecki [Tue, 8 Sep 2015 16:43:10 +0000 (16:43 +0000)]
kernel: describe bridge patch "remove IPv6 depependency of bridge in 2.6.38+"

It was initially added in r27237 by jow as patch from Jonas.

SVN-Revision: 46826

5 years agokernel: describe bridge patch "port isolate"
Rafał Miłecki [Tue, 8 Sep 2015 16:43:04 +0000 (16:43 +0000)]
kernel: describe bridge patch "port isolate"

It was initially added in r25762 by nbd.

SVN-Revision: 46825

5 years agokernel: describe bridge patch "always accept EAP"
Rafał Miłecki [Tue, 8 Sep 2015 16:42:58 +0000 (16:42 +0000)]
kernel: describe bridge patch "always accept EAP"

It was initially added in r26015 by nbd.

SVN-Revision: 46824

5 years agokernel: describe bridge patch "no EAP forward"
Rafał Miłecki [Tue, 8 Sep 2015 16:42:50 +0000 (16:42 +0000)]
kernel: describe bridge patch "no EAP forward"

It was initially added in r25095 by nbd.

SVN-Revision: 46823

5 years agokernel: restore 640-bridge_no_eap_forward.patch to its original form
Felix Fietkau [Tue, 8 Sep 2015 14:29:55 +0000 (14:29 +0000)]
kernel: restore 640-bridge_no_eap_forward.patch to its original form

It was corrupted in r38528. The most obvious symptom is repeated messages like this:

Tue Sep  8 08:25:18 2015 kern.warn kernel: [77141.972226] br-lan: received packet on wlan0 with own address as source address

Signed-off-by: Dmitry Ivanov <>
SVN-Revision: 46821

5 years agokernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4
Felix Fietkau [Tue, 8 Sep 2015 12:31:04 +0000 (12:31 +0000)]
kernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4

Everything except for blkcipher was already built-in, so make blkcipher
built-in as well.

Signed-off-by: Felix Fietkau <>
SVN-Revision: 46820