openwrt/openwrt.git
3 years agoar71xx: fix legacy image building
Jo-Philipp Wich [Fri, 24 Jun 2016 11:32:22 +0000 (13:32 +0200)]
ar71xx: fix legacy image building

After the conversion from legacy device profiles to the newer profile
information embedded in the image building code, the legacy recipes got
triggered twice with different eval depths, leading to shell syntax errors
when processing certain images.

The double processing was caused by the remaining Image/Build macro in
legacy.mk which serves as main entry point for the new style image build code
in conjunction with the newly introduced LegacyDevice/* macros which caused
the legacy image build fallback code to kick in.

In order to fix the issue, rework all legacy macros to work under the legacy
image build wrapper and remove the Image/Build macro of legacy.mk to prevent
legacy profiles getting executed in the context of the new build code.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 years agotools: e2fsprogs: bump to 1.43.1
Kevin Darbyshire-Bryant [Wed, 22 Jun 2016 20:37:23 +0000 (21:37 +0100)]
tools: e2fsprogs: bump to 1.43.1

Bump e2fsprogs to v1.43.1 & refresh patches

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
3 years agoar71xx: merge profiles into image building code
John Crispin [Fri, 17 Jun 2016 04:53:22 +0000 (06:53 +0200)]
ar71xx: merge profiles into image building code

Signed-off-by: John Crispin <john@phrozen.org>
3 years agoramips: add suport for ZBT APE522II
Roger Pueyo Centelles [Thu, 23 Jun 2016 08:58:08 +0000 (10:58 +0200)]
ramips: add suport for ZBT APE522II

The ZBT APE522II is a dual-radio outdoor CPE based on the MT7620a SoC. It has
64 MB RAM, 8 MB flash, 2 Fast Ethernet ports via internal switch (one with
802.3af 48V PoE support), a 802.11b/g/n SoC 2.4 GHz radio and an 802.11a/n/ac
MT7612E-based 5 GHz radio.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
3 years agomountd: update to latest git HEAD
John Crispin [Wed, 22 Jun 2016 09:52:35 +0000 (11:52 +0200)]
mountd: update to latest git HEAD

adds HFS+ support

Signed-off-by: John Crispin <john@phrozen.org>
3 years agoipq806x: enable ieee80211 phy hotplug and patch macaddress
Adrian Panella [Tue, 21 Jun 2016 16:12:26 +0000 (11:12 -0500)]
ipq806x: enable ieee80211 phy hotplug and patch macaddress

Calibration data for QCA99x0 in this device has bogus macaddress.
The data cannot be modified directly, as it breaks checksum control.
Instead change the macaddress from phy add hotplug event.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
3 years agosquashfs4: use upstream xz compression header format
Hauke Mehrtens [Tue, 21 Jun 2016 20:05:44 +0000 (22:05 +0200)]
squashfs4: use upstream xz compression header format

In the upstream kernel and the upstream squashfs4 tools the xz
compression header looks the following:
struct disk_comp_opts {
        __le32 dictionary_size;
        __le32 flags;
};

We added some other members and also moved some existing members. Place
the members which are already in upstream header at the same position
as in that kernel and add our own at the end. The kernel should not
have a problem when there are some additional members and just ignore
them.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agolantiq: fix network in failsafe
Mathias Kresin [Sun, 19 Jun 2016 14:30:55 +0000 (16:30 +0200)]
lantiq: fix network in failsafe

So far the network in failsafe is setup only for one board. Use the
eth0 interface as lan interface for all boards for now.

If a board has its lan interface(s) on another eth, a special
handling based on the board name can be added.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agolinux: arc: disable kernel unwinding to fix modules loading
Alexey Brodkin [Wed, 22 Jun 2016 12:47:20 +0000 (15:47 +0300)]
linux: arc: disable kernel unwinding to fix modules loading

With update of binutils for ARC (this is now based on upstream 2.26)
we noticed issues with loadable kernel modules.

Something like that was happening:
--------------------->8-------------------
mbcache: unknown relocation: 49
insmod: can't insert './mbcache.ko': invalid module format
--------------------->8-------------------

More details could be found in that discussion in binutils mailing list:
http://thread.gmane.org/gmane.comp.gnu.binutils/74662

As of now the simplest work-around is to disable in-kernel unwinder
for now. That will at least allow us to use modules again.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: John Crispin <john@phrozen.org>
3 years agoipq806x: Fix typo in Qualcomm device names
Sven Eckelmann [Wed, 22 Jun 2016 09:35:07 +0000 (11:35 +0200)]
ipq806x: Fix typo in Qualcomm device names

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
3 years agopackages: prefer http over git for git protocol
Hauke Mehrtens [Tue, 21 Jun 2016 21:52:55 +0000 (23:52 +0200)]
packages: prefer http over git for git protocol

In company networks everything except the http and https protocol is
often causes problems, because the network administrators try to block
everything else. To make it easier to use LEDE in company networks use
the https/http protocol for git access when possible.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agouboot-lantiq: Add Arcadyan ARV7506PW11 support
Mathias Kresin [Mon, 20 Jun 2016 16:47:39 +0000 (18:47 +0200)]
uboot-lantiq: Add Arcadyan ARV7506PW11 support

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agolantiq: add support for ARV7506PW11 (Alice/O2 IAD 4421)
Oswald Buddenhagen [Mon, 20 Jun 2016 16:47:38 +0000 (18:47 +0200)]
lantiq: add support for ARV7506PW11 (Alice/O2 IAD 4421)

Ethernet, ADSL2+ and LEDs are fully functional.

Supporting the two TAE ports and SIP gateway was not attempted.

The WiFi is unreliable, due to experimental support for rt35xx family
devices by the rt2800pci driver.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
[rebase to LEDE HEAD]
[switch to normal image instead of brnboot image]
[remove not required pinmux child nodes keys, leds, ebu, exin, pci_in and pci_out]
[remove switch_rst pinmux child node (no support for hw reset in driver/setting a default GPIO value in DT]
[enable usage of the wireless LED]
[fixup mac address configuration]
Sgned-off-by: Mathias Kresin <dev@kresin.me>
3 years agoar71xx: hiwifi-hc6361: lift size limit on kernel and rootfs parts
Yousong Zhou [Mon, 20 Jun 2016 14:25:50 +0000 (22:25 +0800)]
ar71xx: hiwifi-hc6361: lift size limit on kernel and rootfs parts

The patch has been run-tested and the relevant dmsg logs are as the
following

    [    0.762447] Creating 5 MTD partitions on "spi0.0":
    [    0.767217] 0x000000000000-0x000000010000 : "u-boot"
    [    0.775139] 0x000000010000-0x000000020000 : "bdinfo"
    [    0.781014] 0x000000020000-0x000000fe0000 : "firmware"
    [    0.810558] 2 uimage-fw partitions found on MTD device firmware
    [    0.815043] 0x000000020000-0x000000170000 : "kernel"
    [    0.821925] 0x000000170000-0x000000fe0000 : "rootfs"
    [    0.827587] mtd: device 4 (rootfs) set to be root filesystem
    [    0.831937] 1 squashfs-split partitions found on MTD device rootfs
    [    0.837983] 0x0000005c0000-0x000000fe0000 : "rootfs_data"
    [    0.845621] 0x000000fe0000-0x000000ff0000 : "backup"
    [    0.851445] 0x000000ff0000-0x000001000000 : "art"

While at it, convert to new build method

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
3 years agokernel: Move append-dtb to common image-commands
Ben Whitten [Fri, 17 Jun 2016 14:00:17 +0000 (15:00 +0100)]
kernel: Move append-dtb to common image-commands

This build step is used by various targets, move it to a common section.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
3 years agolantiq: Correct ADSL race condition
Daniel Gimpelevich [Thu, 16 Jun 2016 07:18:49 +0000 (00:18 -0700)]
lantiq: Correct ADSL race condition

puts br2684ctl init after ADSL init instead of before, so that the ESI
is set at the right time, and for consistency with the PTM driver.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
3 years agolantiq: Slow down SPI flash on the DGN3500
Daniel Gimpelevich [Thu, 9 Jun 2016 09:12:03 +0000 (02:12 -0700)]
lantiq: Slow down SPI flash on the DGN3500

The bootloader uses 30 MHz as the SPI frequency for flash on the Germany and
North America models, and 50 MHz for it on the worldwide model, but the Lantiq
SPI driver in OpenWrt and LEDE may access the flash differently such that
writes are capped at 20 MHz, leading to read errors reported on the worldwide
model at 30 MHz.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Acked-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
3 years agolantiq: remove gr7000 support
John Crispin [Tue, 21 Jun 2016 09:57:24 +0000 (11:57 +0200)]
lantiq: remove gr7000 support

this seems to have never worked as the wrong SoC is selected

Signed-off-by: John Crispin <john@phrozen.org>
3 years agoipq806x: add initial support for Netgear R7800
Pavel Kubelun [Tue, 21 Jun 2016 09:55:00 +0000 (11:55 +0200)]
ipq806x: add initial support for Netgear R7800

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
3 years agoipq806x: move ath10k firmware selection into device profiles
Pavel Kubelun [Tue, 21 Jun 2016 09:52:52 +0000 (11:52 +0200)]
ipq806x: move ath10k firmware selection into device profiles

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
3 years agoipq806x: move smb208 nodes into a regulator subnode
Pavel Kubelun [Tue, 21 Jun 2016 09:50:05 +0000 (11:50 +0200)]
ipq806x: move smb208 nodes into a regulator subnode

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
3 years agolantiq: make EASY80920 work with both chip versions
Hauke Mehrtens [Sat, 18 Jun 2016 22:17:39 +0000 (00:17 +0200)]
lantiq: make EASY80920 work with both chip versions

The EASY80920 is available with the A1X and the A2X chip version
depending on the board version. Add both firmware versions to device
tree and make the driver load the correct version depending on the chip
version.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agolantiq: use new partition layout for EASY80920NAND
Hauke Mehrtens [Sat, 11 Jun 2016 15:47:24 +0000 (17:47 +0200)]
lantiq: use new partition layout for EASY80920NAND

This matches the EASY80920NAND boards with UGW.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agolantiq: build fullimage.img for EASY80920NAND
Hauke Mehrtens [Sat, 11 Jun 2016 14:14:52 +0000 (16:14 +0200)]
lantiq: build fullimage.img for EASY80920NAND

This image format is used by Lantiq's / Intel's UGW version 6.1 to 7.1.
These images can be flashed onto a board with the SoC vendor boot
loader as a replacement for the vendor firmware.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agolantiq: remove patch adding support for building without reset controller
Hauke Mehrtens [Tue, 7 Jun 2016 21:10:45 +0000 (23:10 +0200)]
lantiq: remove patch adding support for building without reset controller

The lantiq kernel arch code selects CONFIG_RESET_CONTROLLER always, so
it is always selected when the lantiq target is build. we do not need
support for unselected CONFIG_RESET_CONTROLLER option.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agotools: patch-image: Added optional size option
Vishnu Swaroop Duddu [Thu, 12 May 2016 14:37:29 +0000 (20:07 +0530)]
tools: patch-image: Added optional size option

Added optional command line option for patch-image tool
Default 16KB size is still maintained as this is an optional argument.
if one wants to specify or increase size they can provide this option.
sample usage: patch-dtb <file> <dtb> [dtb max size]

Signed-off-by: Vishnu Swaroop Duddu <duddu.swaroop@intel.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agobrcm2708: properly detect the Raspberry Pi Zero
Álvaro Fernández Rojas [Tue, 21 Jun 2016 15:49:43 +0000 (17:49 +0200)]
brcm2708: properly detect the Raspberry Pi Zero

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agobrcm63xx: simplify block size and image offset options
Álvaro Fernández Rojas [Tue, 21 Jun 2016 12:17:02 +0000 (14:17 +0200)]
brcm63xx: simplify block size and image offset options

Instead of having CFE_EXTRAS for every device that need specific block sizes
and image offset, let's define a couple of vars which can be customized for
each device.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agobrcm63xx: add sysupgrade images
Álvaro Fernández Rojas [Tue, 21 Jun 2016 11:53:45 +0000 (13:53 +0200)]
brcm63xx: add sysupgrade images

Some devices require padded images in order to prevent CFE from flashing them
to the wrong offset.
For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this
implies 8 and 16 MB images, which is way too large and some devices aren't
capable of flashing them through sysupgrade.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agolantiq: fix typo in new image generation
Ben Mulvihill [Mon, 20 Jun 2016 16:35:52 +0000 (18:35 +0200)]
lantiq: fix typo in new image generation

Fix typo in commit a6f7536a73c93794812d5e810fb41c3d0ff1fb27
(new image generation)

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
3 years agoath10k-ct: Update to latest 10.4.3 CT firmware for 9980 chipsets.
Ben Greear [Tue, 21 Jun 2016 01:12:58 +0000 (18:12 -0700)]
ath10k-ct: Update to latest 10.4.3 CT firmware for 9980 chipsets.

This works around regressions added in the 4.7 kernel.

Signed-off-by: Ben Greear <greearb@candelatech.com>
3 years agosdk: Fix keeping unset as unset
Daniel Dickinson [Tue, 10 May 2016 22:26:42 +0000 (18:26 -0400)]
sdk: Fix keeping unset as unset

The configuration preservation mechanism fails to keep items was are unset
as unset.  For busybox this causes issues when building with custom
settings in the SDK.  Therefore preserve busybox unset settings.
In addition we preserve non-package selection unset settings because
they may be important for making sure we compile and identical
package for packages that are recompiled in the SDK.

Now that SDK not longer ships .config this becomes relevant for
any use of the SDK.

Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
3 years agoath10k-firmware: fix board-2.bin download URL
Kevin Darbyshire-Bryant [Tue, 21 Jun 2016 09:37:49 +0000 (10:37 +0100)]
ath10k-firmware: fix board-2.bin download URL

Original URL got 303 redirect which then also dropped the commit id
leading to different file revision & MD5 mismatch.

Corrected URL & clarified commit ID use in Makefile

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
3 years agobrcm63xx: merge DSL-274X-F1 profiles
Jonas Gorski [Sat, 18 Jun 2016 11:38:46 +0000 (13:38 +0200)]
brcm63xx: merge DSL-274X-F1 profiles

The only difference is a field in the image tag header, so just define
two images for it instead of treating them as separate devices.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
3 years agobrcm63xx: move the bootargs into the dtb files
Jonas Gorski [Sat, 12 Sep 2015 19:52:43 +0000 (21:52 +0200)]
brcm63xx: move the bootargs into the dtb files

Instead of using a fixed commandline, allow one per device.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
3 years agobrcm63xx: use upstreamed compatible name for the periph intc
Jonas Gorski [Wed, 15 Jun 2016 10:37:33 +0000 (12:37 +0200)]
brcm63xx: use upstreamed compatible name for the periph intc

This makes the eventual migration to bmips easier, as dts files
will require less changes.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
3 years agobrcm63xx: fix external IRQs
Daniel Gonzalez [Mon, 11 Apr 2016 11:26:15 +0000 (13:26 +0200)]
brcm63xx: fix external IRQs

External IRQs are currently broken, fix the BCM6345_EXT_IRQ driver.

Since the adoption of the new driver irq-bcm6345-ext, in Chaos Calmer,
external IRQs don't work. It seems there were some minor errors at the initial
development of the driver.

This patch fixes the ticket https://dev.openwrt.org/ticket/21613

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
3 years agobrcm63xx: fix single profile selection
Álvaro Fernández Rojas [Fri, 17 Jun 2016 08:13:02 +0000 (10:13 +0200)]
brcm63xx: fix single profile selection

Fixes commit c6990347.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
3 years agobcm53xx: backport BCM5301X patches for SRAB
Rafał Miłecki [Mon, 20 Jun 2016 20:57:09 +0000 (22:57 +0200)]
bcm53xx: backport BCM5301X patches for SRAB

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
3 years agokernel: backport bgmac changes from net-next
Rafał Miłecki [Mon, 20 Jun 2016 20:38:01 +0000 (22:38 +0200)]
kernel: backport bgmac changes from net-next

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
3 years agokernel: rename bgmac patches that went into the same kernel
Rafał Miłecki [Mon, 20 Jun 2016 20:29:14 +0000 (22:29 +0200)]
kernel: rename bgmac patches that went into the same kernel

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
3 years agoprocd: properly set /dev/snd permission and group
John Crispin [Thu, 16 Jun 2016 09:52:29 +0000 (11:52 +0200)]
procd: properly set /dev/snd permission and group

Signed-off-by: John Crispin <john@phrozen.org>
3 years agoe2fsprogs: Bump to v1.43.1
Xotic750 [Wed, 15 Jun 2016 22:38:57 +0000 (00:38 +0200)]
e2fsprogs: Bump to v1.43.1

Signed-off-by: Graham Fairweather <xotic750@gmail.com>
3 years agoramips: remove duplicate i2c dts info
Michael Lee [Sat, 18 Jun 2016 02:55:04 +0000 (10:55 +0800)]
ramips: remove duplicate i2c dts info

Signed-off-by: Michael Lee <igvtee@gmail.com>
3 years agoramips: update i2c drivers
Michael Lee [Thu, 7 Jan 2016 13:50:24 +0000 (21:50 +0800)]
ramips: update i2c drivers

* add rt_i2c structure to store driver data
* rewrite read/write check function and add i2c error status check.
  so we don't need to wait until time out.
* add 10 bits address support. according to the data sheet i think
  it is possible. but i haven't verify it.
* the most important is start transfer only need once. otherwise
  it cause I2C_STARTERR status.
* add set i2c clock speed register by dts options "clock-frequency".
  not just hard code it.
* add mt7621 i2c driver. i just copy i2c-ralink.c and change register
  names. and the hardware don't support error status. so i remove it.
  but the logic is the same.

Signed-off-by: Michael Lee <igvtee@gmail.com>
3 years agoipq806x: fix MAC_POWER_SEL switch configuration
Josh Bendavid [Sat, 18 Jun 2016 09:50:29 +0000 (11:50 +0200)]
ipq806x: fix MAC_POWER_SEL switch configuration

Fixes instability/corruption on the ethernet interface connected to port0 on the switch.

Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
3 years agolantiq: BTHOMEHUBV5A - use the power event code for the restart button
Mathias Kresin [Sun, 19 Jun 2016 14:34:47 +0000 (16:34 +0200)]
lantiq: BTHOMEHUBV5A - use the power event code for the restart button

The restart event code is used in LEDE to trigger a factory reset on
long press as well.

By using the power event code, the restart functionality can be used
without being prone to trigger a factory reset.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agolantiq: diag - switch off the power led on failsafe
Mathias Kresin [Sun, 19 Jun 2016 14:33:44 +0000 (16:33 +0200)]
lantiq: diag - switch off the power led on failsafe

This patch is a follow up to commit 4cf3fd4 "add support for indicating
the boot state using three leds".

At the time of writing the patch, I wasn't aware that it's possible to
switch info failsafe after boot (factory reset).

Enabling the failsafe led without disabling the running led causes an
unexpected led colour on devices using a single multicolour led to
indicate the boot state.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agolantiq: fix build of NAND sysupgrade images
Mathias Kresin [Sun, 19 Jun 2016 14:32:47 +0000 (16:32 +0200)]
lantiq: fix build of NAND sysupgrade images

The *_UBIFS_OPTS variables need to be prefixed with DEVICE_ to match
the profile name.

The conditions need to be evaluated after the *_UBIFS_OPTS are set,
otherwise the variables are always empty.

Do not append or pass the DEVICE_ prefixed profile name to the images.
Use the name that is passed by the Image/Build/Profile/ step.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agolantiq: ltq-atm: fix xrx200 depends
Mathias Kresin [Sat, 18 Jun 2016 22:59:03 +0000 (00:59 +0200)]
lantiq: ltq-atm: fix xrx200 depends

This one was missed by abc346db0e191ebeeb122ce26d1831469fadee1c.

Signed-off-by: Mathias Kresin <dev@kresin.me>
3 years agofstools: fix missing dependency
John Crispin [Sat, 18 Jun 2016 15:07:44 +0000 (17:07 +0200)]
fstools: fix missing dependency

Signed-off-by: John Crispin <john@phrozen.org>
3 years agobcm53xx: properly support sysupgrade using Seama on NAND devices
Rafał Miłecki [Fri, 10 Jun 2016 23:50:34 +0000 (01:50 +0200)]
bcm53xx: properly support sysupgrade using Seama on NAND devices

It updates kernel and then formats UBI without loosing erase counters.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
3 years agomtd: support -c (datasize) option for fixseama command
Rafał Miłecki [Fri, 10 Jun 2016 23:41:10 +0000 (01:41 +0200)]
mtd: support -c (datasize) option for fixseama command

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
3 years agokernel: rename B53 symbols to avoid upstream kernel conflict
Rafał Miłecki [Tue, 14 Jun 2016 10:55:41 +0000 (12:55 +0200)]
kernel: rename B53 symbols to avoid upstream kernel conflict

In kernel 4.7 there is upstreamed b53 driver using (mostly?) the same
symbols as our b53 does. Change our symbols so both drivers can coexist
in kernel tree.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
3 years agokernel: mtdsplit: calculate kernel partition precisely for Seama
Rafał Miłecki [Mon, 20 Jun 2016 05:58:29 +0000 (07:58 +0200)]
kernel: mtdsplit: calculate kernel partition precisely for Seama

So far "kernel" partition didn't contain just a kernel. It also included
Seama header and meta data. This was making kernel update complex and it
wasn't trivial to read kernel size.
Fix it by making "kernel" parition contain just a kernel image.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
3 years agouboot-envtools: add support for ZBT-WG2626
Daniel Golle [Sun, 19 Jun 2016 14:22:23 +0000 (16:22 +0200)]
uboot-envtools: add support for ZBT-WG2626

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agokernel: backport cosmetic ubifs patch
Daniel Golle [Sat, 18 Jun 2016 16:34:22 +0000 (18:34 +0200)]
kernel: backport cosmetic ubifs patch

Despite the MS_SILENT flag being set when probing for ubifs rootfs a
logline indicating an error is generated during boot:
UBIFS error (pid: 1): cannot open "ubi0:rootfs", error -19
This leads to confusion and there shouldn't be lines containing
the word 'error' twice in a bootlog if actually everything is fine
(just the rootfs happens to be something else than ubifs)

The patch added has been submitted and was accepted upstream, see:
http://lists.infradead.org/pipermail/linux-mtd/2016-June/068056.html
http://patchwork.ozlabs.org/patch/637491

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agolantiq: clean up / fix LegacyDevice template handling
Felix Fietkau [Fri, 17 Jun 2016 18:22:58 +0000 (20:22 +0200)]
lantiq: clean up / fix LegacyDevice template handling

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agolantiq: get rid of ifneq() checks inside command templates
Felix Fietkau [Fri, 17 Jun 2016 18:00:49 +0000 (20:00 +0200)]
lantiq: get rid of ifneq() checks inside command templates

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoimage.mk: add a separate step for building kernel images for LegacyDevice support
Felix Fietkau [Fri, 17 Jun 2016 18:22:44 +0000 (20:22 +0200)]
image.mk: add a separate step for building kernel images for LegacyDevice support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoimage.mk: run LegacyDevice prepare once instead of once per filesystem
Felix Fietkau [Fri, 17 Jun 2016 17:55:27 +0000 (19:55 +0200)]
image.mk: run LegacyDevice prepare once instead of once per filesystem

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoimage.mk: fix make variable/command context leakage between LegacyDevice templates
Felix Fietkau [Fri, 17 Jun 2016 17:30:43 +0000 (19:30 +0200)]
image.mk: fix make variable/command context leakage between LegacyDevice templates

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agolantiq: small fix for legacy profile builds
John Crispin [Fri, 17 Jun 2016 16:50:07 +0000 (18:50 +0200)]
lantiq: small fix for legacy profile builds

Signed-off-by: John Crispin <john@phrozen.org>
3 years agoocteon: fix image build
Jo-Philipp Wich [Fri, 17 Jun 2016 15:39:54 +0000 (17:39 +0200)]
octeon: fix image build

The generic sysupgrade image attempted to use the wrong filesystem type due
to premature variable interpolation leading to the following error on the
buildbot system:

    cp: cannot stat `.../root.squashfs': No such file or directory
    make[4]: *** [.../tmp/lede-octeon-generic-ext4-sysupgrade.tar] Error 1

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 years agomt76: update to the latest version, fixes a SMPS handling issue
Felix Fietkau [Fri, 17 Jun 2016 12:50:55 +0000 (14:50 +0200)]
mt76: update to the latest version, fixes a SMPS handling issue

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agomedaitek: convert the NAND target to UBI
John Crispin [Fri, 17 Jun 2016 01:46:25 +0000 (03:46 +0200)]
medaitek: convert the NAND target to UBI

Signed-off-by: John Crispin <john@phrozen.org>
3 years agoprocd: update to latest git head
John Crispin [Thu, 16 Jun 2016 22:59:35 +0000 (00:59 +0200)]
procd: update to latest git head

fixes !root perms of /var/{run,lock,state}

Signed-off-by: John Crispin <john@phrozen.org>
3 years agobase-files: remove fstab symlink
John Crispin [Thu, 16 Jun 2016 22:54:25 +0000 (00:54 +0200)]
base-files: remove fstab symlink

the symlink no longer gets used since we switched to the block-mount tool.

Signed-off-by: John Crispin <john@phrozen.org>
3 years agoar71xx: WDR4300: Fixed default VLAN order
David Pinilla Caparrós [Thu, 16 Jun 2016 15:26:16 +0000 (17:26 +0200)]
ar71xx: WDR4300: Fixed default VLAN order

Reordered the VLANs so the LAN ports are set to VLAN 1 and the WAN port is set to VLAN 2, as in the other routers in the config file. Moreover, this model had this VLAN mapping in OpenWRT Chaos Calmer. It seems that the VLAN were switched when fixing a bug in the port mapping ( OpenWRT changeset 47799 )

Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>
3 years agoRevert "ramips: update i2c drivers"
John Crispin [Thu, 16 Jun 2016 20:52:53 +0000 (22:52 +0200)]
Revert "ramips: update i2c drivers"

This reverts commit d8202a84096831d4e6e2a522476bd6a0d46e6413.

the commit broke I2C on various boards.

Signed-off-by: John Crispin <john@phrozen.org>
3 years agoipq806x: activate ATAG DTB mangle and EA8500 rootblock in dts
Adrian Panella [Sat, 11 Jun 2016 00:10:15 +0000 (19:10 -0500)]
ipq806x: activate ATAG DTB mangle and EA8500 rootblock in dts

The command-line arguments provided by the boot loader will be
appended to a new device tree property: bootloader-args.
If there is a property "append-rootblock" in DT under /chosen
and a root= option in bootloaders command line it will be parsed
and added to DT bootargs with the form: <append-rootblock>XX.
Only command line ATAG will be processed, the rest of the ATAGs
sent by bootloader will be ignored.
This is usefull in dual boot systems, to get the current root partition
without afecting the rest of the system.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
3 years agocns3xxx: fix RX softIRQ loop
Koen Vandeputte [Thu, 16 Jun 2016 11:48:39 +0000 (13:48 +0200)]
cns3xxx: fix RX softIRQ loop

Already reschedule when 1 or more frames came in.

Checking for a full queue could produce a re-schedule loop as
the checked RX ring location could contain undefined values
depending on activity in previous loops.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 years agonetlogic: R.I.P
John Crispin [Wed, 15 Jun 2016 18:28:21 +0000 (20:28 +0200)]
netlogic: R.I.P

I asked florian and he is ok with this. i think no one apart from him has
access to these boards.

Signed-off-by: John Crispin <john@phrozen.org>
3 years agomountd: update to latest git HEAD
John Crispin [Wed, 15 Jun 2016 15:29:55 +0000 (17:29 +0200)]
mountd: update to latest git HEAD

Signed-off-by: John Crispin <john@phrozen.org>
3 years agolantiq: convert remaining legacy targets to the new image generation code
John Crispin [Wed, 15 Jun 2016 12:51:11 +0000 (14:51 +0200)]
lantiq: convert remaining legacy targets to the new image generation code

Signed-off-by: John Crispin <john@phrozen.org>
3 years agoath10k: merge some more pending upstream fixes
Felix Fietkau [Fri, 17 Jun 2016 12:12:44 +0000 (14:12 +0200)]
ath10k: merge some more pending upstream fixes

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoRevert "ar71xx/cpe510: use second wifi calibration table"
Alexander Couzens [Fri, 17 Jun 2016 04:07:17 +0000 (21:07 -0700)]
Revert "ar71xx/cpe510: use second wifi calibration table"

Using the high power table can damage the device in some cases.

This reverts commit bf27ac019c137e7baf90ca6ef0e40945ae871797.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
3 years agouhttpd: update to the latest version, adds some extensions to handler script support
Felix Fietkau [Thu, 16 Jun 2016 17:00:11 +0000 (19:00 +0200)]
uhttpd: update to the latest version, adds some extensions to handler script support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agouclient: update to the latest version with better help and DELETE
Rafał Miłecki [Thu, 16 Jun 2016 12:51:40 +0000 (14:51 +0200)]
uclient: update to the latest version with better help and DELETE

This slightly improves output of help messages and supports sending
message body for DELETE.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
3 years agopackage-ipkg: do not include feeds.mk at metadata dump time to speed up scanning
Felix Fietkau [Thu, 16 Jun 2016 09:56:14 +0000 (11:56 +0200)]
package-ipkg: do not include feeds.mk at metadata dump time to speed up scanning

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoinclude/feeds.mk: allow installation from feed packages that are installed but no...
Felix Fietkau [Thu, 16 Jun 2016 09:41:52 +0000 (11:41 +0200)]
include/feeds.mk: allow installation from feed packages that are installed but no longer in feeds.conf

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agopackage-ipkg.mk: fix Provides for packages with multiple PROVIDES entries
Matthias Schiffer [Thu, 16 Jun 2016 02:11:41 +0000 (04:11 +0200)]
package-ipkg.mk: fix Provides for packages with multiple PROVIDES entries

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
3 years agohostapd: fix breakage with non-nl80211 drivers
Felix Fietkau [Wed, 15 Jun 2016 17:28:48 +0000 (19:28 +0200)]
hostapd: fix breakage with non-nl80211 drivers

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agotools/cmake: fix parallel build with Make 4.2+
Matthias Schiffer [Wed, 15 Jun 2016 16:54:02 +0000 (18:54 +0200)]
tools/cmake: fix parallel build with Make 4.2+

Avoid using the --parallel argument to the CMake bootstrap, as that doesn't
allow us to remove the -j argument. Instead, pass the HOST_JOBS arguments
in MAKEFLAGS.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
3 years agobuild: don't add -j for parallel builds with Make 4.2+
Matthias Schiffer [Wed, 15 Jun 2016 16:56:17 +0000 (18:56 +0200)]
build: don't add -j for parallel builds with Make 4.2+

Make usually passes -j and jobserver arguments as part of MAKEFLAGS. LEDE
removes MAKEFLAGS to have better control of the build, and re-adds the
jobserver arguments with -j to the Make commandline where desired.

Make 4.2+ behave differently with these arguments passed on the commandline
than in MAKEFLAGS: -j will override the jobserver argument and the job
count will be unlimited.

Moving the flags to MAKEFLAGS will need many packages to be changed and
tested; therefore, we opt for a less invasive change for now and just
remove -j for Make 4.2+, as the jobserver argument alone is enough to
enable parallel builds for these Make versions.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
3 years agohostapd: fix compilation error in wext backend
Jo-Philipp Wich [Wed, 15 Jun 2016 17:10:11 +0000 (19:10 +0200)]
hostapd: fix compilation error in wext backend

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 years agoscripts: feeds: fix version detection for Make >= 4.2.1
Jo-Philipp Wich [Wed, 15 Jun 2016 14:39:26 +0000 (16:39 +0200)]
scripts: feeds: fix version detection for Make >= 4.2.1

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 years agoRevert "lantiq: Use correct macaddr generating logic for the DGN3500"
Felix Fietkau [Wed, 15 Jun 2016 16:40:12 +0000 (18:40 +0200)]
Revert "lantiq: Use correct macaddr generating logic for the DGN3500"

This reverts commit 492964e741f1e0254b6ed7c0a095551a31d25dc9, which
makes no sense. /etc/board.d cannot be used for system init stuff.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agohostap-driver: mark as broken, it causes extra bloat in hostapd and is probably not...
Felix Fietkau [Wed, 15 Jun 2016 16:27:44 +0000 (18:27 +0200)]
hostap-driver: mark as broken, it causes extra bloat in hostapd and is probably not used anymore

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agomt76: update to latest version, adds survey support for mt76x2
Felix Fietkau [Wed, 15 Jun 2016 15:50:51 +0000 (17:50 +0200)]
mt76: update to latest version, adds survey support for mt76x2

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agohostapd: implement fallback for incomplete survey data
Felix Fietkau [Wed, 15 Jun 2016 15:31:48 +0000 (17:31 +0200)]
hostapd: implement fallback for incomplete survey data

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agohostapd: update to version 2016-06-15
Felix Fietkau [Wed, 15 Jun 2016 15:11:43 +0000 (17:11 +0200)]
hostapd: update to version 2016-06-15

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agohostapd: Update to version 2016-05-05
Michal Hrusecky [Thu, 12 May 2016 12:07:15 +0000 (14:07 +0200)]
hostapd: Update to version 2016-05-05

Fixes CVE-2016-4476 and few possible memory leaks.

Signed-off-by: Michal Hrusecky <Michal.Hrusecky@nic.cz>
3 years agolibubox: update to the latest version, fixes an uloop signal handling race condition
Felix Fietkau [Wed, 15 Jun 2016 15:01:06 +0000 (17:01 +0200)]
libubox: update to the latest version, fixes an uloop signal handling race condition

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agorealview: sync kernel config file
John Crispin [Wed, 15 Jun 2016 13:57:01 +0000 (15:57 +0200)]
realview: sync kernel config file

Signed-off-by: John Crispin <john@phrozen.org>
3 years agomt76: update to the latest version, fixes a monitor mode injection crash
Felix Fietkau [Wed, 15 Jun 2016 13:00:14 +0000 (15:00 +0200)]
mt76: update to the latest version, fixes a monitor mode injection crash

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agolantiq: refresh patches
Felix Fietkau [Wed, 15 Jun 2016 12:17:27 +0000 (14:17 +0200)]
lantiq: refresh patches

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agokernel: refresh patches
Felix Fietkau [Wed, 15 Jun 2016 12:17:19 +0000 (14:17 +0200)]
kernel: refresh patches

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agokernel: replace SMP cacheflush fix with some patches from linux-mti.git
Felix Fietkau [Wed, 15 Jun 2016 12:17:06 +0000 (14:17 +0200)]
kernel: replace SMP cacheflush fix with some patches from linux-mti.git

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobcm53xx: use uncompressed zImages
Felix Fietkau [Tue, 14 Jun 2016 10:01:22 +0000 (12:01 +0200)]
bcm53xx: use uncompressed zImages

The boot loader expects LZMA compressed kernel images

Signed-off-by: Felix Fietkau <nbd@nbd.name>