4 years agoramips: add usb-ledtrig-usbport to DEVICE_PACKAGES of CY-SWR1100
Sungbo Eo [Wed, 13 Nov 2019 14:23:17 +0000 (23:23 +0900)]
ramips: add usb-ledtrig-usbport to DEVICE_PACKAGES of CY-SWR1100

CY-SWR1100 has a USB LED but kmod-usb-ledtrig-usbport is missing
in default images. This commit adds it.

Signed-off-by: Sungbo Eo <>
[changed commit title, backported to 19.07]
Signed-off-by: Adrian Schmutzler <>
(cherry picked from commit 261c746631d2bf311a6b62a6d3bacce6fde90976)

4 years agoramips: fix MAC address setup for Samsung CY-SWR1100
Sungbo Eo [Wed, 13 Nov 2019 14:22:54 +0000 (23:22 +0900)]
ramips: fix MAC address setup for Samsung CY-SWR1100

Ethernet MAC address setup has been broken since c3e420f28cf1. Restore
original setting.

Fixes: c3e420f28cf1 ("ramips: Add support for D-Link DCH-M225")
Signed-off-by: Sungbo Eo <>
(cherry picked from commit 7231c1edd99217c6baa8d7d5d841d75ad9de26f1)
[backported due to base-files split]
Signed-off-by: Adrian Schmutzler <>
4 years agokernel: fix typo in fb-sys-fops autoload
Sungbo Eo [Mon, 11 Nov 2019 16:16:28 +0000 (01:16 +0900)]
kernel: fix typo in fb-sys-fops autoload

AutoLoad parameter must match the exact kernel module name. Fix it.

Fixes: 125f1ce9ad0c ("kernel: video: add DRM core and IMX DRM support for HDMI/LVDS")
Signed-off-by: Sungbo Eo <>
(cherry picked from commit 6990510aca41074351f92a5abc6f4afb4b606506)

4 years agohostapd: add IEEE 802.11k support
Kyle Copperfield [Thu, 31 Oct 2019 20:03:39 +0000 (20:03 +0000)]
hostapd: add IEEE 802.11k support

Enables radio resource management to be reported by hostapd to clients.

Co-developed-by: Lorenzo Santina <>
Signed-off-by: Lorenzo Santina <>
Signed-off-by: Kyle Copperfield <>
[removed the DMARC crap]
Signed-off-by: Petr Štetiar <>
(cherry picked from commit 87f9292300cf56ad17f44363ced213c59a95ef44)

4 years agohostapd: Add mesh support for wpad full
Hauke Mehrtens [Sat, 7 Sep 2019 14:17:14 +0000 (16:17 +0200)]
hostapd: Add mesh support for wpad full

This increases the size of the binary slightly:

427722 wpad-wolfssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk
431696 wpad-openssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk

442109 wpad-wolfssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk
445997 wpad-openssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk

Signed-off-by: Hauke Mehrtens <>
(cherry picked from commit 49cc712b44c76e99bfb716c06700817692975e05)

4 years agohostapd: use getrandom syscall
Hauke Mehrtens [Sat, 4 May 2019 12:02:07 +0000 (14:02 +0200)]
hostapd: use getrandom syscall

hostapd will not use the getrandom() syscall and as a fallback use
/dev/random, the syscall is supported since Linux 3.17 and in the musl,
glibc and uclibc version used by OpenWrt.

Signed-off-by: Hauke Mehrtens <>
(cherry picked from commit 998686364da7d002ba9f6dbb43cc5f32294dd4ab)

4 years agohostapd: Remove unneeded patch
Hauke Mehrtens [Sat, 4 May 2019 00:01:15 +0000 (02:01 +0200)]
hostapd: Remove unneeded patch

All the content of this function is proceeded by IEEE8021X_EAPOL no code
accesses the ssid variable outside of this ifdef.

Signed-off-by: Hauke Mehrtens <>
(cherry picked from commit 0d86bf518aaefa57bef577d09a18aff03eccb70c)

4 years agohostapd: use config option CONFIG_NO_LINUX_PACKET_SOCKET_WAR
Hauke Mehrtens [Fri, 3 May 2019 23:58:53 +0000 (01:58 +0200)]
hostapd: use config option CONFIG_NO_LINUX_PACKET_SOCKET_WAR

Instead of patching the workaround away, just use the config option.

Signed-off-by: Hauke Mehrtens <>
(cherry picked from commit 9b4a27455c17c00698ce7ce24e0bcad419c6319e)

4 years agohostapd: Update to version 2.9 (2019-08-08)
Hauke Mehrtens [Sat, 10 Aug 2019 14:49:34 +0000 (16:49 +0200)]
hostapd: Update to version 2.9 (2019-08-08)

The size of the ipkgs increase a bit (between 0.7% and 1.1%):

old 2019-04-21 (2.8):
288264 wpad-basic_2019-04-21-63962824-1_mipsel_24kc.ipk
256188 wpad-mini_2019-04-21-63962824-1_mipsel_24kc.ipk
427475 wpad-openssl_2019-04-21-63962824-1_mipsel_24kc.ipk
423071 wpad-wolfssl_2019-04-21-63962824-1_mipsel_24kc.ipk

new 2019-08-08 (2.9):
290217 wpad-basic_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk
258745 wpad-mini_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk
431732 wpad-openssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk
427641 wpad-wolfssl_2019-08-08-ca8c2bd2-1_mipsel_24kc.ipk

Signed-off-by: Hauke Mehrtens <>
(cherry picked from commit 167028b750028ae3dac24f5ff96bbb1ba04e8bd7)

4 years agohostapd: Update to version 2.8 (2019-04-21)
Hauke Mehrtens [Fri, 3 May 2019 23:52:25 +0000 (01:52 +0200)]
hostapd: Update to version 2.8 (2019-04-21)

This also syncs the configuration files with the default configuration
files, but no extra options are activated or deactivated.

The mesh patches were partially merged into hostapd 2.8, the remaining
patches were extracted from patchwork and are now applied by OpenWrt.
The patches still have open questions which are not fixed by the author.
They were taken from this page:*

The changes in 007-mesh-apply-channel-attributes-before-running-Mesh.patch
where first applied to hostapd, but later reverted in hostapd commit
3e949655ccc5 because they caused memory leaks.

The size of the ipkgs increase a bit (between 1.3% and 2.3%):

old 2018-12-02 (2.7):
283337 wpad-basic_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk
252857 wpad-mini_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk
417473 wpad-openssl_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk
415105 wpad-wolfssl_2018-12-02-c2c6c01b-11_mipsel_24kc.ipk

new 2019-04-21 (2.8):
288264 wpad-basic_2019-04-21-63962824-1_mipsel_24kc.ipk
256188 wpad-mini_2019-04-21-63962824-1_mipsel_24kc.ipk
427475 wpad-openssl_2019-04-21-63962824-1_mipsel_24kc.ipk
423071 wpad-wolfssl_2019-04-21-63962824-1_mipsel_24kc.ipk

Signed-off-by: Hauke Mehrtens <>
Tested-by: Stefan Lippers-Hollmann <>
(cherry picked from commit 8af79550e6c280717660f66032d89d21007b15d2)

4 years agohostapd: mirror ieee80211w ap mode defaults in station mode
Jo-Philipp Wich [Fri, 20 Sep 2019 11:20:21 +0000 (13:20 +0200)]
hostapd: mirror ieee80211w ap mode defaults in station mode

For AP mode, OpenWrt automatically sets ieee80211w to either 1 or 2, depending
on whether the encryption is set to sae-mixed, or sae/owe/eap suite-b.

Mirror the same defaults for client mode connections, in order to allow an
OpenWrt station to associate to an OpenWrt ap with SAE, OWE or Suite-B encryption
without the need to manually specify "option ieee80211w" on the station.

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit abb4f4075e791789fdb00731035e08a8cf51555f)

4 years agohostapd: fix OWE settings in client mode
Jo-Philipp Wich [Fri, 20 Sep 2019 09:40:52 +0000 (11:40 +0200)]
hostapd: fix OWE settings in client mode

This changes fixes the generation of the wpa_supplicant client configuration
in WPA3 OWE client mode. Instead of incorrectly emitting key_mgmt=NONE, use
the proper key_mgmt=OWE setting instead.

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit 4209b28d23b8bf28575af5e8904194f49b81532e)

4 years agohostapd: declare struct wpa_bss early
Leon M. George [Wed, 11 Sep 2019 13:22:55 +0000 (15:22 +0200)]
hostapd: declare struct wpa_bss early

wps_supplicant.h assumes that 'struct wpa_bss' is forward declared if
CONFIG_WPS is not defined.  With the later inclusion of
600-ubus_support, the issue manifests in warnings like these:

wps_supplicant.h:113:15: warning: 'struct wpa_bss' declared inside parameter list will not be visible outside of this definition or declaration
        struct wpa_bss *bss)

This patch forward declares 'struct wpa_bss' regardless.

Signed-off-by: Leon M. George <>
[commit message facelift]
Signed-off-by: Petr Štetiar <>
(cherry picked from commit f974f8213b94578581b35e6b3f8fb1fd5a35f753)

4 years agohostapd: revert signature change in patch
Leon M. George [Wed, 11 Sep 2019 12:10:18 +0000 (14:10 +0200)]
hostapd: revert signature change in patch

The original wpa_hexdump uses a 'void *' for the payload.  With patch
410-limit_debug_messages, the signature changes and compiler warnings
occur at various places.  One such warning is:

 wpa_debug.h:106:20: note: expected 'const u8 * {aka const unsigned char *}' but argument is of type 'struct wpa_eapol_key *'

Signed-off-by: Leon M. George <>
[commit message facelift]
Signed-off-by: Petr Štetiar <>
(cherry picked from commit a123df275846b1b83aaf3d7488a1544f7c0e09aa)

4 years agohostapd: adjust removed wolfssl options
Eneas U de Queiroz [Mon, 1 Jul 2019 16:40:01 +0000 (13:40 -0300)]
hostapd: adjust removed wolfssl options

This edjusts the selection of recently removed wolfssl options which
have always been built into the library even in their abscence.
Also remove the selection of libwolfssl itself, allowing the library to
be built as a module.

Signed-off-by: Eneas U de Queiroz <>
(cherry picked from commit 94d131332b5adbcf885a92608c40a22b79b3c708)

4 years agobase-files: add /usr/share/libubox/ to sysupgrade stage2
Russell Senior [Tue, 12 Nov 2019 23:33:48 +0000 (15:33 -0800)]
base-files: add /usr/share/libubox/ to sysupgrade stage2

Discovered recent changes had broken sysupgrade for ar71xx mikrotik
rb-493g, traced the problem to missing /usr/share/libubox/ after
switching to tmpfs.

Signed-off-by: Russell Senior <>
4 years agoath79: update uboot-envtools for Netgear WNR routers
Michal Cieslakiewicz [Wed, 6 Nov 2019 09:44:10 +0000 (10:44 +0100)]
ath79: update uboot-envtools for Netgear WNR routers

Boards added: WNR1000v2, WNR2000v3, WNR612v2, WNDR3700.

Signed-off-by: Michal Cieslakiewicz <>
(cherry picked from commit d47b68700644f37084b82845e9557b1e9954f533)
[removed WNR1000v2/WNR2000v3 since not supported in 19.07]
Signed-off-by: Adrian Schmutzler <>
4 years agoath79: fix SUPPORTED_DEVICES for TP-Link TL-WR1043ND v3
Adrian Schmutzler [Mon, 11 Nov 2019 18:03:20 +0000 (19:03 +0100)]
ath79: fix SUPPORTED_DEVICES for TP-Link TL-WR1043ND v3

In ar71xx, the board name for the TL-WR1043ND v3 is equal to v2:

Fix SUPPORTED_DEVICES for v3 in ath79 accordingly.

Signed-off-by: Adrian Schmutzler <>
(cherry picked from commit b5791118ccd3039cc9ef6fd3b1c4efcad6ab154f)

4 years agoar71xx: fix tl-wdr3320-v2 upgrade
南浦月 [Thu, 19 Sep 2019 09:41:01 +0000 (17:41 +0800)]
ar71xx: fix tl-wdr3320-v2 upgrade

Fix the error that tl-wdr3320-v2 can't upgrade firmware via web
interface by using magic_ver="0200" for this device.

Signed-off-by: 南浦月 <>
[commit message facelift]
Signed-off-by: Adrian Schmutzler <>
(cherry picked from commit 0ff2385a92c0a31769fce954b7bd571d6114dbc8)

4 years agoar71xx: update uboot-envtools for Netgear WNR routers
Michal Cieslakiewicz [Wed, 6 Nov 2019 09:43:14 +0000 (10:43 +0100)]
ar71xx: update uboot-envtools for Netgear WNR routers

Boards added: WNR1000v2, WNR2000v3, WNR2200, WNR612v2, WNDR4300.
Boards changed: WNDR3700 (u-boot env size is 2 sectors not 1).

Signed-off-by: Michal Cieslakiewicz <>
(cherry picked from commit 11052900494ec8216b9b39ba0b24d5e036f4d323)

4 years agokernel: bump 4.14 to 4.14.152
Koen Vandeputte [Wed, 6 Nov 2019 16:14:43 +0000 (17:14 +0100)]
kernel: bump 4.14 to 4.14.152

Refreshed all patches.

Altered patches:
- 301-arch-support-layerscape.patch

Remove upstreamed:
- 950-0311-sc16is7xx-Fix-for-Unexpected-interrupt-8.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <>
4 years agofirmware: intel-microcode: bump to 20190918
Zoltan HERPAI [Sat, 9 Nov 2019 12:01:50 +0000 (13:01 +0100)]
firmware: intel-microcode: bump to 20190918

  * New upstream microcode datafile 20190918

      *Might* contain mitigations for INTEL-SA-00247 (RAMBleed), given
      the set of processors being updated.
  * Updated Microcodes:
      sig 0x000306d4, pf_mask 0xc0, 2019-06-13, rev 0x002e, size 19456
      sig 0x000306f4, pf_mask 0x80, 2019-06-17, rev 0x0016, size 18432
      sig 0x00040671, pf_mask 0x22, 2019-06-13, rev 0x0021, size 14336
      sig 0x000406f1, pf_mask 0xef, 2019-06-18, rev 0xb000038, size 30720
      sig 0x00050654, pf_mask 0xb7, 2019-07-31, rev 0x2000064, size 33792
      sig 0x00050657, pf_mask 0xbf, 2019-08-12, rev 0x500002b, size 51200
      sig 0x00050662, pf_mask 0x10, 2019-06-17, rev 0x001c, size 32768
      sig 0x00050663, pf_mask 0x10, 2019-06-17, rev 0x7000019, size 24576
      sig 0x00050664, pf_mask 0x10, 2019-06-17, rev 0xf000017, size 24576
      sig 0x00050665, pf_mask 0x10, 2019-06-17, rev 0xe00000f, size 19456

Signed-off-by: Zoltan HERPAI <>
4 years agofirmware: intel-microcode: bump to 20190618
Zoltan HERPAI [Sun, 25 Aug 2019 20:34:13 +0000 (22:34 +0200)]
firmware: intel-microcode: bump to 20190618

  * Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223
    CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091
  * Updated Microcodes:
    sig 0x000206d6, pf_mask 0x6d, 2019-05-21, rev 0x061f, size 18432
    sig 0x000206d7, pf_mask 0x6d, 2019-05-21, rev 0x0718, size 19456

Signed-off-by: Zoltan HERPAI <>
4 years agofirmware: intel-microcode: bump to 20190514
Zoltan HERPAI [Thu, 16 May 2019 10:32:14 +0000 (12:32 +0200)]
firmware: intel-microcode: bump to 20190514

  * New Microcodes:
    sig 0x00030678, pf_mask 0x02, 2019-04-22, rev 0x0838, size 52224
    sig 0x00030678, pf_mask 0x0c, 2019-04-22, rev 0x0838, size 52224
    sig 0x00030679, pf_mask 0x0f, 2019-04-23, rev 0x090c, size 52224
    sig 0x000406c3, pf_mask 0x01, 2019-04-23, rev 0x0368, size 69632
    sig 0x000406c4, pf_mask 0x01, 2019-04-23, rev 0x0411, size 68608
    sig 0x00050657, pf_mask 0xbf, 2019-02-27, rev 0x5000021, size 47104
    sig 0x000806e9, pf_mask 0x10, 2018-10-18, rev 0x009e, size 98304
    sig 0x000806eb, pf_mask 0xd0, 2018-10-25, rev 0x00a4, size 99328
    sig 0x000806ec, pf_mask 0x94, 2019-02-12, rev 0x00b2, size 98304
    sig 0x000906ec, pf_mask 0x22, 2018-09-29, rev 0x00a2, size 98304
    sig 0x000906ed, pf_mask 0x22, 2019-02-04, rev 0x00b0, size 97280

  * Updated Microcodes:
    sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288
    sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336
    sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552
    sig 0x000306d4, pf_mask 0xc0, 2019-03-07, rev 0x002d, size 19456
    sig 0x000306e4, pf_mask 0xed, 2019-03-14, rev 0x042e, size 16384
    sig 0x000306e7, pf_mask 0xed, 2019-03-14, rev 0x0715, size 17408
    sig 0x000306f2, pf_mask 0x6f, 2019-03-01, rev 0x0043, size 34816
    sig 0x000306f4, pf_mask 0x80, 2019-03-01, rev 0x0014, size 18432
    sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504
    sig 0x00040661, pf_mask 0x32, 2019-02-26, rev 0x001b, size 25600
    sig 0x00040671, pf_mask 0x22, 2019-03-07, rev 0x0020, size 14336
    sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352
    sig 0x000406f1, pf_mask 0xef, 2019-03-02, rev 0xb000036, size 30720
    sig 0x00050654, pf_mask 0xb7, 2019-04-02, rev 0x200005e, size 32768
    sig 0x00050662, pf_mask 0x10, 2019-03-23, rev 0x001a, size 32768
    sig 0x00050663, pf_mask 0x10, 2019-03-23, rev 0x7000017, size 24576
    sig 0x00050664, pf_mask 0x10, 2019-03-23, rev 0xf000015, size 23552
    sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456
    sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408
    sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360
    sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352
    sig 0x000506f1, pf_mask 0x01, 2019-03-21, rev 0x002e, size 11264
    sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728
    sig 0x000806e9, pf_mask 0x10, 2019-04-01, rev 0x00b4, size 98304
    sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328
    sig 0x000806ea, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328
    sig 0x000806eb, pf_mask 0xd0, 2019-03-30, rev 0x00b8, size 98304
    sig 0x000806ec, pf_mask 0x94, 2019-03-30, rev 0x00b8, size 97280
    sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328
    sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304
    sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328
    sig 0x000906ec, pf_mask 0x22, 2019-02-14, rev 0x00ae, size 98304
    sig 0x000906ed, pf_mask 0x22, 2019-03-17, rev 0x00b8, size 97280
  * Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223
    CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091

Signed-off-by: Zoltan HERPAI <>
4 years agoath79: fix identifier for Nanostation M in ath9k caldata extraction
Adrian Schmutzler [Sun, 10 Nov 2019 23:15:36 +0000 (00:15 +0100)]
ath79: fix identifier for Nanostation M in ath9k caldata extraction

When Nanostation M was renamed from ubnt,nano-m to ubnt,nanostation-m
in commit f1396ac753cc ("ath79: align naming of Ubiquiti Nanostation M"),
the caldata extraction in 10-ath9k-eeprom was overlooked.

Signed-off-by: Adrian Schmutzler <>
(cherry picked from commit 5dc535419fe5f59839686570545fc4180e14d545)

4 years agorpcd: update to latest Git HEAD
Jo-Philipp Wich [Sun, 10 Nov 2019 20:33:47 +0000 (21:33 +0100)]
rpcd: update to latest Git HEAD

77ad0de plugin: avoid truncating numeric values

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit aa89bdcd04676b21cbe3e8a7b8df3545a86d947a)

4 years agowolfssl: update to v4.2.0-stable
Eneas U de Queiroz [Wed, 6 Nov 2019 21:22:52 +0000 (18:22 -0300)]
wolfssl: update to v4.2.0-stable

Many bugs were fixed--2 patches removed here.

This release of wolfSSL includes fixes for 5 security vulnerabilities,
including two CVEs with high/critical base scores:

- potential invalid read with TLS 1.3 PSK, including session tickets
- potential hang with ocspstaping2 (always enabled in openwrt)
- CVE-2019-15651: 1-byte overread when decoding certificate extensions
- CVE-2019-16748: 1-byte overread when checking certificate signatures
- DSA attack to recover DSA private keys

Signed-off-by: Eneas U de Queiroz <>
(cherry picked from commit f4853f7cca816214cd6e64cffe2b73d0b8c16def)

4 years agowolfssl: allow building with hw-crytpo and AES-CCM
Eneas U de Queiroz [Thu, 12 Sep 2019 20:00:00 +0000 (17:00 -0300)]
wolfssl: allow building with hw-crytpo and AES-CCM

Hardware acceleration was disabled when AES-CCM was selected as a
workaround for a build failure.  This applies a couple of upstream
patches fixing this.

Signed-off-by: Eneas U de Queiroz <>
(cherry picked from commit ab19627ecc3923687fd339f4f23dc45572d00ce0)

4 years agoustream-ssl: update to latest Git HEAD
Jo-Philipp Wich [Tue, 5 Nov 2019 13:38:40 +0000 (14:38 +0100)]
ustream-ssl: update to latest Git HEAD

c9b6668 ustream-ssl: skip writing pending data if .eof is true after connect

Fixes: CVE-2019-5101, CVE-2019-5102
Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit 6f9157e6bdea91507af84acdf53da7c0e6879bc1)

4 years agoustream-ssl: Update to latest git HEAD
Hauke Mehrtens [Fri, 1 Nov 2019 20:16:18 +0000 (21:16 +0100)]
ustream-ssl: Update to latest git HEAD

465f8dc wolfssl: adjust to new API in v4.2.0
3b06c65 Update example certificate & key, fix typo
1c38fd8 wolfssl: enable CN validation
33308ee ustream-io-cyassl.c: fix client-mode connections
79d91aa Remove CyaSSL, WolfSSL < 3.10.4 support

Signed-off-by: Hauke Mehrtens <>
(cherry picked from commit 57ff06405e09ebce705c01178143c3ce907993b2)

4 years agomac80211: Fix dependencies of kmod-rsi91x-usb
Hauke Mehrtens [Sat, 9 Nov 2019 19:10:58 +0000 (20:10 +0100)]
mac80211: Fix dependencies of kmod-rsi91x-usb

Instead of depending on kmod-usb2 make it depend on the normal USB
dependencies. This should hopefully fix some problems seen in the build
bot builds for powerpc_8540.

In addition also activate DRIVER_11N_SUPPORT support.

Signed-off-by: Hauke Mehrtens <>
(cherry picked from commit 3ff3b044c01949cd7280978b17d0348ee9e7f4ae)

4 years agostrace: Fix build on PowerPC
Hauke Mehrtens [Sat, 9 Nov 2019 19:07:18 +0000 (20:07 +0100)]
strace: Fix build on PowerPC

This patch breaks building on PowerPC, like the mpc85xx_generic
target for me.

Fixes: FS#2585
Signed-off-by: Hauke Mehrtens <>
(cherry picked from commit b01305c8d26d8eb3525cf79591075601b04736cc)

4 years agouboot-envtools: Add TARGET_LDFLAGS to fix PIE and RELRO
Hauke Mehrtens [Thu, 7 Nov 2019 20:01:40 +0000 (21:01 +0100)]
uboot-envtools: Add TARGET_LDFLAGS to fix PIE and RELRO

Forward the OpenWrt TARGET_LDFLAGS to the linker of the fw_printenv tool.
In addition also use the more standard make invocation script.
With this change the fw_printenv tool is built with PIE and Full RELRO
support when activated globally in OpenWrt.

Signed-off-by: Hauke Mehrtens <>
(cherry picked from commit b7b2be0b268ced260ca8df84be1b0d469aaf6e38)

4 years agoxfsprogs: Fix compilation with newer musl
Rosen Penev [Thu, 7 Nov 2019 22:55:10 +0000 (14:55 -0800)]
xfsprogs: Fix compilation with newer musl

Backported upstream patch.

Signed-off-by: Rosen Penev <>
(cherry picked from commit 39035df71c37d474be2cb2a0fad8d70da095c68b)

4 years agoramips: correct R6220 button flag
David Bauer [Sat, 9 Nov 2019 18:10:51 +0000 (19:10 +0100)]
ramips: correct R6220 button flag

All buttons on the Netgear R6220 are active-low while they are flagged
as active-high.

The GPIO status reads the following for no buttons pressed:

root@64367-r6220:~# cat /sys/kernel/debug/gpio
gpio-7   (                    |wps                 ) in  hi
gpio-8   (                    |wifi                ) in  hi
gpio-14  (                    |reset               ) in  hi

Signed-off-by: David Bauer <>
(cherry picked from commit f7f9fe5256ebb660d3160452c3c01a9eb080938f)

4 years agokernel: fix LED netdev trigger on interface rename
Martin Schiller [Fri, 25 Oct 2019 07:22:29 +0000 (09:22 +0200)]
kernel: fix LED netdev trigger on interface rename

This fixes the netdev LED trigger for interfaces, which are renamed
during initialization (e.g. ppp interfaces).

Fixes: FS#2193
Fixes: FS#2239
Signed-off-by: Martin Schiller <>
Signed-off-by: Daniel Golle <>
(cherry picked from commit edbadec843a77286d4f690a3641b7bca97f4c998)

4 years agobuild: cleanup possibly dangling Python 3 host symlink
Etienne Champetier [Fri, 8 Nov 2019 14:58:01 +0000 (06:58 -0800)]
build: cleanup possibly dangling Python 3 host symlink

When switching from master branch to 19.07 or older, we need to ensure
that Python symlink in staging bin directory points to Python 2.

We can't rely completly just on SetupHostCommand as its executed only in
cases when the $(STAGING_DIR_HOST)/bin/python doesn't already exist, so
we need to remove it before running SetupHostCommand.

This is a cherry-pick of 3b68fb57c938af3948ae4c2da61501183fbef649
with python3 instead of python2

Signed-off-by: Petr Štetiar <>
Signed-off-by: Etienne Champetier <>
4 years agobuild: fixup python SetupHostCommand to use python2
Etienne Champetier [Thu, 31 Oct 2019 10:54:59 +0000 (03:54 -0700)]
build: fixup python SetupHostCommand to use python2

Here is a way to break your build env without this patch:
1) have python point to python3, and no python2
2) start the build, SetupHostCommand will create a symlink
./staging_dir/host/bin/python -> /usr/bin/python
3) build fails on scons because it can't find any python2
4) install python2 and restart the build
5) the build fails on wireless-regdb compile because python is python3 instead of python

Signed-off-by: Etienne Champetier <>
4 years agoexpat: Update to version 2.2.9
Josef Schlehofer [Sun, 29 Sep 2019 09:21:29 +0000 (11:21 +0200)]
expat: Update to version 2.2.9

Fixes CVE-2019-15903

Signed-off-by: Josef Schlehofer <>
(cherry picked from commit b4af2c689fc8736777940b7bbf009bb1672296ec)

4 years agotools/e2fsprogs: Update to version 1.45.4
Josef Schlehofer [Thu, 3 Oct 2019 19:23:00 +0000 (21:23 +0200)]
tools/e2fsprogs: Update to version 1.45.4

Fixes CVE-2019-5094

Signed-off-by: Josef Schlehofer <>
(cherry picked from commit 700e7a2eb9c515ffe4f3278857e538ea37cc5e56)

4 years agocurl: bump to 7.66.0
Hans Dedecker [Tue, 17 Sep 2019 20:45:41 +0000 (22:45 +0200)]
curl: bump to 7.66.0

Refresh patches, for changes in version 7.66.0 see

Fixes CVEs:

Signed-off-by: Hans Dedecker <>
(cherry picked from commit 71cf4a272c9cf7d6e604e6327d0c94aeceac26e7)

4 years agoath79: disable building future NAND images for GL-AR300M/GL-AR750S
Adrian Schmutzler [Thu, 7 Nov 2019 17:53:37 +0000 (18:53 +0100)]
ath79: disable building future NAND images for GL-AR300M/GL-AR750S

To simplify the upgrade process and ensure easier identification of
device partitioning, the following devices are disabled on ath79
target in openwrt-19.07 branch:

- glinet,gl-ar300m-nor
- glinet,gl-ar300m-nand
- glinet,gl-ar750s

Proper ath79 (NAND) support for the devices is expected to be
introduced based on kernel 4.19 (see GitHub PR #2184).

In openwrt-19.07, ar71xx should be used for those devices.

With this, we ensure that the new ath79 image names (at least for
releases) refer to the updated partitioning.

Signed-off-by: Adrian Schmutzler <>
4 years agomac80211 ath9k: force QCA953x clock to 25MHz
David Bauer [Tue, 5 Nov 2019 21:28:39 +0000 (22:28 +0100)]
mac80211 ath9k: force QCA953x clock to 25MHz

The QCA953x only supports 25 MHz refclk, however some OEMs set an
invalid bootstrap value for the REF_CLK option, which would break the
clock detection in ath9k.

Force the QCA953x refclk to 25MHz in ath9k, as this is (according to the
datasheet) the only valid frequency.

Signed-off-by: David Bauer <>
(cherry picked from commit 4c6fe32468bc60cc25a8c298498c0be3c73e7378)

4 years agoar71xx: improve support for TP-Link CPE510 v2
Adrian Schmutzler [Tue, 6 Aug 2019 10:20:05 +0000 (12:20 +0200)]
ar71xx: improve support for TP-Link CPE510 v2

This fixes commit bae927c551fd ("ar71xx: add support for TP-LINK CPE510
V2.0") where the support for this device wasn't optimal.

Device support for the CPE510v2 so far has been a hack to enable
flashing with CPE510v1 images. Those even have different hardware (e.g.
additional ethernet port).

With this patch, we provide proper support for this device in ar71xx.

- Flash factory image through stock firmware WEB UI or through TFTP
- To get to TFTP recovery just hold reset button while powering on
  for around 4-5 seconds and release.
- Rename factory image to recovery.bin
- Stock TFTP server IP:
- Stock device TFTP address:

Fixes: bae927c551fd ("ar71xx: add support for TP-LINK CPE510 V2.0")
Signed-off-by: Andrew Cameron <>
[Rebased onto revert commit, changed comments in mach-cpe510.c,
changed commit title and description, fixed eth0 MAC address,
removed eth1 initialization]
Signed-off-by: Adrian Schmutzler <>
[squashed revert, added fixes tag]
Signed-off-by: Petr Štetiar <>
(cherry picked from commit c79b796280fa5cd64bac663f9d5e5d9a737c30d6)
[added CPE510V2 entry to tplink-safeloader.c]
Signed-off-by: Adrian Schmutzler <>
4 years agogitignore: ignore patches in OpenWrt root directory
Adrian Schmutzler [Tue, 5 Nov 2019 12:05:29 +0000 (13:05 +0100)]
gitignore: ignore patches in OpenWrt root directory

This will have GIT ignore patches in root directory, as created
when using "git format-patch".

Signed-off-by: Adrian Schmutzler <>
(cherry picked from commit 2c5413559880c54c5eec980121febfe6c7cd287a)

4 years agoOpenWrt v19.07.0-rc1: revert to branch defaults
Jo-Philipp Wich [Wed, 6 Nov 2019 08:08:44 +0000 (09:08 +0100)]
OpenWrt v19.07.0-rc1: revert to branch defaults

Signed-off-by: Jo-Philipp Wich <>
4 years agoOpenWrt v19.07.0-rc1: adjust config defaults v19.07.0-rc1
Jo-Philipp Wich [Wed, 6 Nov 2019 08:08:44 +0000 (09:08 +0100)]
OpenWrt v19.07.0-rc1: adjust config defaults

Signed-off-by: Jo-Philipp Wich <>
4 years agoRevert "ipq806x: fix EA8500 switch control"
Petr Štetiar [Tue, 5 Nov 2019 20:51:23 +0000 (21:51 +0100)]
Revert "ipq806x: fix EA8500 switch control"

There is a problem with the EA8500, the switch will not work after soft
reboot, the only way to get it working again is to power cycle it

There are probably several issues in the play, it's quite hard to fix it
without having access to the actual device, so I don't see any other
option now, then revert the offending commit.

Ref: PR#2047
Fixes: FS#2168 ("Switch no longer work after restart on Linksys EA8500")
Reported-by: Adam <>
Signed-off-by: Petr Štetiar <>
(cherry picked from commit 04d6753d03e3a6db07b7a2d3296774d0965bbbfa)

4 years agoath10k-firmware: update Candela Tech firmware images
Koen Vandeputte [Tue, 5 Nov 2019 11:16:58 +0000 (12:16 +0100)]
ath10k-firmware: update Candela Tech firmware images

The release notes since last time for wave-1:

  *  October 5,  2019:  Fix too-short msg caused by invalid use of PayloadLen in receive path.
                        This appears to resolve the issue of getting (and ignoring) too-short commands
                        when we detect loss of CE interrupts and go into polling mode.

  *  October 12, 2019:  Fix regression in IBSS mode that caused SWBA overrun issues.  Related to
                        regression added during the ct-station logic, specifically TSF allocation.
                        Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test.

  *  October 15, 2019:  Only send beacon tx completion events if we can detect CT driver is being
                        used (based on CT_STATS_OK flag being set).  This should help CT firmware work
                        better on stock driver.

The release notes since last time for wave-2:

  *  October 15, 2019:  Only send beacon tx completion events if we can detect CT driver is being
                        used (based on ATH10k_USE_TXCOMPL_TXRATE2 | ATH10k_USE_TXCOMPL_TXRATE1 flags being set).
                        This should help CT firmware work better on stock driver.

  *  October 31, 2019:  Compile out peer-ratecode-list-event.  ath10k driver ignores the event.

  *  November 1, 2019:  Fix rate-ctrl related crash when nss and other things were changed while
                        station stays associated.  See bug:

Signed-off-by: Koen Vandeputte <>
(cherry picked from commit e716e93a2f7290086f49992c9980773c88100c3a)

4 years agoustream-ssl: backport fix for CVE-2019-5101, CVE-2019-5102
Jo-Philipp Wich [Tue, 5 Nov 2019 14:07:55 +0000 (15:07 +0100)]
ustream-ssl: backport fix for CVE-2019-5101, CVE-2019-5102

Signed-off-by: Jo-Philipp Wich <>
4 years agomac80211: rt2x00: backport upstream patches
Daniel Golle [Tue, 5 Nov 2019 09:48:53 +0000 (10:48 +0100)]
mac80211: rt2x00: backport upstream patches

Import patches from upstream to sync 19.07 with master:
 9f3e3323e996 rt2x00: allow to specify watchdog interval
 2034afe4db4a rt2800: add helpers for reading dma done index
 759c5b599cf4 rt2800: initial watchdog implementation
 09db3b000619 rt2800: add pre_reset_hw callback
 710e6cc1595e rt2800: do not nullify initialization vector data
 e403fa31ed71 rt2x00: add restart hw
 0f47aeeada2a rt2800: do not enable watchdog by default
 41a531ffa4c5 rt2x00usb: fix rx queue hang
 3b902fa811cf rt2x00usb: remove unnecessary rx flag checks
 1dc244064c47 rt2x00: no need to check return value of debugfs_create functions
 706f0182b1ad rt2800usb: Add new rt2800usb device PLANEX GW-USMicroN
 95844124385e rt2x00: clear IV's on start to fix AP mode regression
 567a9b766b47 rt2x00: do not set IEEE80211_TX_STAT_AMPDU_NO_BACK on tx status
 14d5e14c8a6c rt2x00: clear up IV's on key removal
 13fa451568ab Revert "rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"
 --pending--  rt2800: remove errornous duplicate condition

Signed-off-by: Daniel Golle <>
4 years agoipq806x: use switch trigger for WAN LED on NETGEAR boards
David Bauer [Mon, 4 Nov 2019 17:48:20 +0000 (18:48 +0100)]
ipq806x: use switch trigger for WAN LED on NETGEAR boards

With this commit, the WAN LED is triggered by the switch port state
instead of the eth0 netdev.
Otherwise, the LED is always illuminated, regardless of the WAN port
link state.

Signed-off-by: David Bauer <>
(cherry picked from commit 70d5989c9c99788a9b2a1a737987edcf7e1ae382)
Signed-off-by: David Bauer <>
4 years agohostapd: enable PMKSA and OK caching for WPA3-Personal
David Bauer [Mon, 28 Oct 2019 18:10:14 +0000 (19:10 +0100)]
hostapd: enable PMKSA and OK caching for WPA3-Personal

This enables PMKSA and opportunistic key caching by default for
WPA2/WPA3-Personal, WPA3-Personal and OWE auth types.
Otherwise, Apple devices won't connect to the WPA3 network.

This should not degrade security, as there's no external authentication

Tested with OCEDO Koala and iPhone 7 (iOS 13.1).

Signed-off-by: David Bauer <>
(cherry picked from commit 3034f8c3b85e70b1dd9b4cd5cd33e9d2cd8be3b8)
Signed-off-by: David Bauer <>
4 years agoscripts/ fix python3 str, bytes confusion
Yousong Zhou [Mon, 4 Nov 2019 11:09:38 +0000 (11:09 +0000)]
scripts/ fix python3 str, bytes confusion

Signed-off-by: Yousong Zhou <>
(cherry picked from commit d26738bc767f48d2dee7097cbfc6d07ffeee58fb)

4 years agouboot-fritz4040: build with ipq40xx "generic" subtarget
Yousong Zhou [Fri, 6 Sep 2019 08:29:50 +0000 (08:29 +0000)]
uboot-fritz4040: build with ipq40xx "generic" subtarget

Fixes: 853e4dd3 ("ipqx0xx: add Generic subtarget")
Signed-off-by: Yousong Zhou <>
(cherry picked from commit 40e3f660c1c0f400092cce09feb8c13bec97caeb)

4 years agoipqx0xx: add Generic subtarget
Paul Spooren [Thu, 22 Aug 2019 00:59:24 +0000 (14:59 -1000)]
ipqx0xx: add Generic subtarget

Both targets miss a subtarget causing an image naming style which is
different from other all othe targets, even tho it already uses
`x/generic/` as subfolder as if the subtarget would exist.

This commit adds the Generic subtarget resulting in consistent naming.

    ~/src/openwrt/openwrt/bin/targets/ipq806x/generic$ ls

CC: John Crispin <>
Signed-off-by: Paul Spooren <>
(cherry picked from commit 853e4dd3062df7cb5704b15d6af6730e3194b571)

4 years agoramips: enable external amplifier for D-Link DIR-810L
Roger Pueyo Centelles [Wed, 4 Sep 2019 09:29:12 +0000 (11:29 +0200)]
ramips: enable external amplifier for D-Link DIR-810L

The 2.4 GHz radio had very poor signal reception (-89 dBm for an AP
sitting 5 m away). By enabling the external amplifier, received signal
has improved to -50 dBm for the same AP.

Signed-off-by: Roger Pueyo Centelles <>
(cherry picked from commit e667d6f46b5fa9ade5da1d76c8cc1aab1df1dcb6)

4 years agoath79: Clean up GL-AR300M DTS/DTSI inclusions
Jeff Kletsky [Wed, 2 Oct 2019 19:06:18 +0000 (12:06 -0700)]
ath79: Clean up GL-AR300M DTS/DTSI inclusions

Modify GL-AR300M-Lite and GL-AR300M (NOR):

* Include qca9531_glinet_gl-ar300m.dtsi directly
  rather than qca9531_glinet_gl-ar300m-nor.dts

* Remove redundant inclusion of gpio.h and input.h

Signed-off-by: Jeff Kletsky <>
Reviewed-by: Adrian Schmutzler <>
(cherry picked from commit f5c7fe2ff0deb20f76b4d65195434e35cbb4e08a)

4 years agoramips: fix WiFi MAC addresses for D-Link DIR-810L
Adrian Schmutzler [Mon, 7 Oct 2019 15:08:52 +0000 (17:08 +0200)]
ramips: fix WiFi MAC addresses for D-Link DIR-810L

So far, WiFi MAC addresses for this device have been set up from
caldata. However, this returns values which do not look like MAC
addresses. They also do not match stock firmware:

wlan0 (5.0): 00:11:22:00:17:D0 from 0x8004
wlan1 (2.4): 00:11:22:00:17:CD from 0x4 (and 0x2e)

It looks like the only valid MAC address on this device is at 0x28.

So, this patch changes setup to calculate addresses based on the
value at 0x28:

lan: *:0A (flash, label)
wan: *:0B (flash + 1)
wifi2: *:0A (flash)
wifi5: *:0C (flash + 2)

Thanks to Roger Pueyo Centelles <> for
investigating this on his devices.

Signed-off-by: Adrian Schmutzler <>
(cherry picked from commit d1072096f49823eb39357f9555d7854a9c91bcfb)

4 years agolibevent2: Update to 2.1.11
Daniel Engberg [Sat, 23 Feb 2019 22:38:04 +0000 (22:38 +0000)]
libevent2: Update to 2.1.11

Update libevent to 2.1.11
Use CMake instead GNU Autotools
Backport following commits:
..and partially
to fix compilation

Signed-off-by: Daniel Engberg <>
(cherry picked from commit f351beedfd47766e5e44a04af50e3724bec54dbc)
(resolves FS#2435)
Signed-off-by: Yousong Zhou <>
4 years agorpcd: update to latest Git HEAD
Jo-Philipp Wich [Fri, 1 Nov 2019 07:32:52 +0000 (08:32 +0100)]
rpcd: update to latest Git HEAD

d442d62 plugin: fix double free in finish callback
ee26d83 main: exec_self: make clang analyzer happy
90e40bd file: exec: properly free memory on error
9ecfada uci: free configs list memory on return
32fba36 exec: always call finish_cb to allow plugin to free up memory
ca3e2d5 plugin: do not free method name separately
02c6e1d exec: properly free memory on rpc_exec() error
cc50263 plugin: exec: properly free memory on parse error
bd0ed25 uci: reset uci_ptr flags when merging set operations
37aa919 plugin: fix leaking invoked method name for exec plugins

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit c2675bb0cef373ff59fcc2dbd77471d244bbc774)

4 years agokernel: bump 4.14 to 4.14.151
Koen Vandeputte [Wed, 30 Oct 2019 11:54:43 +0000 (12:54 +0100)]
kernel: bump 4.14 to 4.14.151

Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <>
4 years agokernel: mark kmod-usb-serial-wwan as hidden
Yousong Zhou [Wed, 30 Oct 2019 12:41:34 +0000 (12:41 +0000)]
kernel: mark kmod-usb-serial-wwan as hidden

The kconfig symbol is an invisible one since its introduction.  It is
not supposed to be enabled on its own.

Resolves FS#1821

Signed-off-by: Yousong Zhou <>
(cherry picked from commit 4bf9bec361699e1c033460964158531adf15d7ee)

4 years agokernel: bump 4.14 to 4.14.150
Koen Vandeputte [Mon, 28 Oct 2019 13:23:13 +0000 (14:23 +0100)]
kernel: bump 4.14 to 4.14.150

Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <>
4 years agomac80211: add an improved moving average algorithm to minstrel
Felix Fietkau [Sat, 28 Sep 2019 13:57:58 +0000 (15:57 +0200)]
mac80211: add an improved moving average algorithm to minstrel

Improves rate control responsiveness and performance

Signed-off-by: Felix Fietkau <>
[reworked to apply on 4.19.79 mac80211 + renumbered + refreshed]
Signed-off-by: Koen Vandeputte <>
4 years agoath79: add support for UniFi AC-LR
Andreas Ziegler [Sun, 6 Oct 2019 17:48:34 +0000 (19:48 +0200)]
ath79: add support for UniFi AC-LR

The Unifi AC-LR has identical hardware to the Unifi AC-Lite.
The antenna setup is different according to the vendor,
which explains the thicker enclosure.

Therefore, it is helpful to know the exact device variant,
instead of having "Ubiquiti UniFi-AC-LITE/LR".

Signed-off-by: Andreas Ziegler <>
[fix legacy name in commit message; add old boardname to
Signed-off-by: David Bauer <>
(cherry picked from commit 07c1ddf522dbe6085af664cf03a41f636a70b99c)
Signed-off-by: David Bauer <>
4 years agoar71xx: add model detection for UniFi AC-LR
Andreas Ziegler [Tue, 22 Oct 2019 20:44:29 +0000 (22:44 +0200)]
ar71xx: add model detection for UniFi AC-LR

This commit adds correct model detection for UniFi
AC-LR. Previously, said device was incorrectly detected

The Information about the device is stored at 0xC in the EEPROM
partition. It corresponds to the sysid in /etc/ of the
Ubiquiti stock firmware.

Signed-off-by: Andreas Ziegler <>
[adjust naming style of target to existing ones]
Signed-off-by: David Bauer <>
(cherry picked from commit 2bc7c519dcc0e7ca09feed24a3b9a105bc49f423)
Signed-off-by: David Bauer <>
4 years agoath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047
David Bauer [Sat, 5 Oct 2019 10:27:44 +0000 (12:27 +0200)]
ath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047

This fixes frequent crashes observed on a UniFi AC Mesh using OpenWrt
master and 19.07. 18.06 seems not affected from our testing.

Signed-off-by: David Bauer <>
(cherry picked from commit 641a93f0f226aa1b4e27bc6f1fc36f9fe63a11a0)
Signed-off-by: David Bauer <>
4 years agoath10k-firmware: retrieve wave 1 firmware from kvalo
David Bauer [Sat, 5 Oct 2019 00:12:56 +0000 (02:12 +0200)]
ath10k-firmware: retrieve wave 1 firmware from kvalo

This commit changes the source of the Wave 1 ath10k-firmware
from linux-firmware to Kall Valos ath10k-firmware repository.

This is necessary as the firmware selected in linux-firmware produces
frequent crashes in some circumstances.

This patch can be removed as soon as linux-firmware carries
10.2.4-1.0-00047 firmware.

Signed-off-by: David Bauer <>
(cherry picked from commit a3914783a32d4fe3612383391cd72638931f1cea)
Signed-off-by: David Bauer <>
4 years agoath79: add LED migration for several Archer Cxx devices
Adrian Schmutzler [Mon, 21 Oct 2019 14:29:36 +0000 (16:29 +0200)]
ath79: add LED migration for several Archer Cxx devices

Several Archer Cxx devices were using board-specific LED names in
ar71xx, which were changed to "tp-link:*" in ath79.

This patch adds migration for them.

Signed-off-by: Adrian Schmutzler <>
(cherry picked from commit 53e6cc7a81175728f64f978c2363a18c1fa66d64)

4 years agoath79: use board name in LED migrations
Adrian Schmutzler [Mon, 21 Oct 2019 14:29:35 +0000 (16:29 +0200)]
ath79: use board name in LED migrations

Several devices added to LED migration script will just have their
(old) board name converted to tp-link.

By using a variable for this, the amount of code in the migration
script can be reduced and the chance for typos is reduced.

This patch also introduces the marker for beginning of a pattern
"^" to the regex, so the match is more specific.

Signed-off-by: Adrian Schmutzler <>
(cherry picked from commit 6b0eb84336edc995f4723f0a005507f158d3e895)

4 years agoath79: fix patching ath9k MAC address for MyNet WiFi Range Extender
Adrian Schmutzler [Mon, 21 Oct 2019 14:19:47 +0000 (16:19 +0200)]
ath79: fix patching ath9k MAC address for MyNet WiFi Range Extender

The code line patching ath9k MAC address for this device contains
a wrong number of arguments including an unset "$mac", which
looks like a typo or copy/paste mistake.

This has been introduced already in the device support commit
745dee11ac78 ("ath79: add support for WD My Net Wi-Fi Range

This patch just removes the "$mac" argument, leaving a formally
valid line. (No on-device test has been performed.)

Cc: Christian Lamparter <>
Signed-off-by: Adrian Schmutzler <>
(cherry picked from commit 6b5303378315084bf080a6408c2ca5b2a911aa5d)

4 years agoath79: fix SUPPORTED_DEVICES for ubnt_nanostation-m
Adrian Schmutzler [Mon, 21 Oct 2019 14:17:01 +0000 (16:17 +0200)]
ath79: fix SUPPORTED_DEVICES for ubnt_nanostation-m

The ar71xx images for the Ubiquiti NanoStation M (XM) devices use
"nanostation-m" as board name, but the ath79 images are only
compatible with the "nano-m" board name, so sysupgrade complains.

By changing this additional supported device, sysupgrade smoothly
upgrades from ar71xx to ath79.

Ref: openwrt#2418

Signed-off-by: Adrian Schmutzler <>
(cherry picked from commit f473ce6f231bb9f8913be50e850c771b3463fa14)

4 years agoath79: add SUPPORTED_DEVICES to ubnt_nanostation-m-xw
Roger Pueyo Centelles [Fri, 4 Oct 2019 12:43:05 +0000 (14:43 +0200)]
ath79: add SUPPORTED_DEVICES to ubnt_nanostation-m-xw

The ar71xx images for the Ubiquiti NanoStation M (XW) devices use
"nanostation-m-xw" as the board name, but the ath79 images are only
compatible with the "nano-m-xw" board name, so sysupgrade complains.

By adding this additional supported device, sysuspgrade smoothly
upgrades from ar71xx to ath79.

Tested on a NanoStation M (XW) running OpenWrt ar71xx r10250-016d1eb.

Signed-off-by: Roger Pueyo Centelles <>
[removed duplicate DEVICE_VARIANT, removed uneeded nano-m-xw support]
Signed-off-by: Petr Štetiar <>
(cherry picked from commit 6dda2ea6ad133705d243d3cc626779ee24bdc88d)
Signed-off-by: Adrian Schmutzler <>
4 years agoath79: fix gigabit link pll-data for EX7300
Daniel Gimpelevich [Thu, 17 Oct 2019 10:42:52 +0000 (03:42 -0700)]
ath79: fix gigabit link pll-data for EX7300

The device did not appear to be reachable unless the connection were
forced to 100Mb or lower. Revert to previously working pll-data.

Also fix the phy-mode to represent the actual state needed for ethernet
to function.

Reported-by: Moritz Schreiber <>
Signed-off-by: Daniel Gimpelevich <>
[add remark about phy-mode property]
Signed-off-by: David Bauer <>
(cherry picked from commit ee41b602a2a2ced06c26e6edc160b2a5e9619f0d)

4 years agoipq40xx: essedma: Fix dead lock
Masafumi UTSUGI [Tue, 1 Oct 2019 09:59:18 +0000 (18:59 +0900)]
ipq40xx: essedma: Fix dead lock

edma_read_append_stats() gets called from two places in the driver.
The first place is the kernel timer that periodically updates
the statistics, so nothing gets lost due to overflows.
The second one it's part of the userspace ethtool ioctl handler
to provide up-to-date values.

For this configuration, the use of spin_lock() is not sufficient
and as per:
the locking has to be upgraded to spin_lock_bh().

Signed-off-by: Masafumi UTSUGI <>
[folded patch into 710-, rewrote message]
Signed-off-by: Christian Lamparter <>
(cherry picked from commit f1d761f95e9664a9c11ce1b98f9e121b43c79d35)

4 years agoopenssl: Add engine configuration to openssl.cnf
Eneas U de Queiroz [Tue, 1 Oct 2019 13:50:34 +0000 (10:50 -0300)]
openssl: Add engine configuration to openssl.cnf

This adds engine configuration sections to openssl.cnf, with a commented
list of engines.  To enable an engine, all you have to do is uncomment
the engine line.

It also adds some useful comments to the devcrypto engine configuration
section.  Other engines currently don't have configuration commands.

Signed-off-by: Eneas U de Queiroz <>
(cherry picked from commit cebf024c4d9fd761e55383a582f7e29ac7cc921c)
Signed-off-by: Christian Lamparter <>
4 years agoath79: correct ar71xx boardname for UniFi AC Lite
David Bauer [Mon, 14 Oct 2019 09:16:54 +0000 (11:16 +0200)]
ath79: correct ar71xx boardname for UniFi AC Lite

This corrects the additional boardname for the image metadata to the one
used in ar71xx. The previously present additional entry was never used
on a running system.

Reviewed-by: Adrian Schmutzler <>
Signed-off-by: David Bauer <>
(cherry picked from commit 1a256470e78a90ac97f41e3335b3fc6ee827e4bc)
Signed-off-by: David Bauer <>
4 years agompc85xx: correct TP-LINK TL-WDR4900 MAC addresses
David Bauer [Sun, 13 Oct 2019 21:37:59 +0000 (23:37 +0200)]
mpc85xx: correct TP-LINK TL-WDR4900 MAC addresses

This commit fixes TP-Link TL-WDR4900 v1 MAC address assignment.
Previously, the MAC addrss was read for the ethernet from the "config"
partition. However, the content of this partition is dependent on the
firmware which was previously installed on the device.

Switch the MAC address source to the U-Boot partition, where the MAC
address is always present at a fixed partition. The partition was
previously already used for the WiFi MAC-addresses.

Reviewed-by: Adrian Schmutzler <>
Signed-off-by: David Bauer <>
(cherry picked from commit 07e555d8735e8fa272e3f6abd35acc9f1ab44367)
Signed-off-by: David Bauer <>
4 years agotcpdump: update to 4.9.3
DENG Qingfang [Sat, 12 Oct 2019 16:29:13 +0000 (00:29 +0800)]
tcpdump: update to 4.9.3

Fixed CVEs:

Signed-off-by: DENG Qingfang <>
(cherry picked from commit 394273c066b8f4317b77f3ede216cfcdd45250c1)

4 years agolibpcap: update to 1.9.1
DENG Qingfang [Sat, 12 Oct 2019 16:28:32 +0000 (00:28 +0800)]
libpcap: update to 1.9.1

Fixed CVEs:

Signed-off-by: DENG Qingfang <>
(cherry picked from commit 44f11353de044834a442d3192b66579b99305720)

4 years agokernel: fix typos in video KernelPackage description
Sungbo Eo [Tue, 8 Oct 2019 14:25:03 +0000 (23:25 +0900)]
kernel: fix typos in video KernelPackage description

Fixes: 4b3d17b709a5 ("kernel: add kmod-fb-sys-ram")
Fixes: b774acb47912 ("package/modules: add missing gspca video drivers for 2.6.32 (patch from #6595)")
Signed-off-by: Sungbo Eo <>
(cherry picked from commit 9f73fad359663fef4decc7440796ec7d3b2b70f7)

4 years agokirkwood: Fix FS#505 - Can't install LEDE on Linksys EA3500
Eubert Bao [Sat, 21 Sep 2019 04:44:16 +0000 (21:44 -0700)]
kirkwood: Fix FS#505 - Can't install LEDE on Linksys EA3500

The default sizes render Device/linksys_audi mage un-flashable.
Restore the pagesize, subpagesize, and blocksize for linksys_audi

Signed-off-by: Eubert Bao <>
(cherry picked from commit e11fc8439c9f7230441408c4d257efc46f372312)

4 years agouClibc++: Fix three bugs
Rosen Penev [Mon, 7 Oct 2019 22:59:52 +0000 (15:59 -0700)]
uClibc++: Fix three bugs

The first allows usage of several functions in the std namespace, which
broke compilation of gddrescue specifically with uClibc-ng and uClibc++.

The second allows usage of long long with normal C++11, which is part of
the standard. Before, std=gnu++11 needed to be passsed to work around it.

As a result of the second patch, the pedantic patch can safely be removed.

Both patches are upstream backports.

Added -std=c++11 to CFLAGS to guarentee proper inclusion of long long.

Added another patch that fixes a typo with the long long support. Sent to

Fixed up license information according to SPDX.

Small cleanups for consistency.

Signed-off-by: Rosen Penev <>
(cherry picked from commit 6ab386c9bc23420816fbcefc84b62cf5438b2c66)

4 years agohostapd: adjust to removal of WOLFSSL_HAS_AES_GCM
Eneas U de Queiroz [Mon, 7 Oct 2019 21:02:38 +0000 (18:02 -0300)]
hostapd: adjust to removal of WOLFSSL_HAS_AES_GCM

WolfSSL is always built with AES-GCM support now.

Signed-off-by: Eneas U de Queiroz <>
(cherry picked from commit ee5a3f6d605602bbff57cde337235088cf9c3ffa)

4 years agotrelay: fix deadlock on remove
Ali MJ Al-Nasrawy [Wed, 25 Sep 2019 14:47:12 +0000 (17:47 +0300)]
trelay: fix deadlock on remove

Upon writing to "remove" file, debugfs_remove_recursive() blocks while
holding rtnl_lock. This is because debugfs' file_ops callbacks are
executed in debugfs_use_file_*() context which prevents file removal.

Fix this by only flagging the device for removal and then do the cleanup
in file_ops.release callback which is executed out of that context.

Signed-off-by: Ali MJ Al-Nasrawy <>
(cherry picked from commit c2635b871d1dd03a6608a9255222672decd49e09)

4 years agotrelay: handle netdevice events correctly
Ali MJ Al-Nasrawy [Wed, 25 Sep 2019 14:47:11 +0000 (17:47 +0300)]
trelay: handle netdevice events correctly

Since v3.11, netdevice notification data are of type
"struct netdev_notifier_info". Handle it as such!

This should fix a critical bug in which devices are unable get released
because trelay does not release resources in response to UNREGISTER
event spamming the log with something like:

unregister_netdevice: waiting for eth0.1 to become free. Usage count = 1

Signed-off-by: Ali MJ Al-Nasrawy <>
(cherry picked from commit 77cfc0739d30c1282f7de24d2ec086d244e34bb7)

4 years agobzip2: add linker option LDFLAGS
leo chung [Wed, 16 Oct 2019 04:22:55 +0000 (12:22 +0800)]
bzip2: add linker option LDFLAGS

if gcc not linker whith this LDFLAGS, "file" will
recognize as pie executable ELF file ( which should be shared object).

this because the file command version before 5.36 not recognize

Signed-off-by: leo chung <>
(cherry picked from commit 56ab58fb6ce29329963619d5a4fffa9d5828176e)

4 years agokernel: layerscape: fix compilation error
Biwen Li [Mon, 14 Oct 2019 04:42:32 +0000 (12:42 +0800)]
kernel: layerscape: fix compilation error

This fixes a compilation error as follows:
drivers/staging/fsl_qbman/qman_config.c:815:29: error: bitwise comparison
always evaluates to false [-Werror=tautological-compare]
  if ((qman_ip_rev & 0xFF00) == QMAN_REV31) {

Signed-off-by: Biwen Li <>
(cherry picked from commit 53b73131e9b38bcae556555de53203d52321794c)

4 years agotplink-safeloader: fix compilation warnings
Ilya Gordeev [Sat, 12 Oct 2019 18:10:09 +0000 (23:10 +0500)]
tplink-safeloader: fix compilation warnings

Signed-off-by: Ilya Gordeev <>
(cherry picked from commit 5daf09435311922cad32b66b75d13b9367db62f7)

4 years agomac80211: Update to version 4.19.79
Hauke Mehrtens [Sat, 12 Oct 2019 08:57:51 +0000 (10:57 +0200)]
mac80211: Update to version 4.19.79

Signed-off-by: Hauke Mehrtens <>
4 years agobuild: add buildinfo as single Makefile target
Paul Spooren [Sun, 13 Oct 2019 19:53:40 +0000 (09:53 -1000)]
build: add buildinfo as single Makefile target

The prepare target was added some 11 years ago to build tools and
toolchain and was recently extended to  create buildinfo files for
reproducibility, meaning {feeds,version,config}.buildinfo.

As the buildbot workflow is more complex than the single prepare (kmod
feed insertion), prepare is only used to create those buildinfo files.
Running prepare however runs `target/compile` as well, taking time even
everything is already compiled.

Splitting this allows the buildbot to run only the `buildinfo` target
while others can still use the convenience feature `prepare`.

Signed-off-by: Paul Spooren <>
(cherry picked from commit 6caf437652d858e5795ee16bdaf9f0436d2488f9)

4 years agolantiq: Fix fw_cutter LzmaWrapper
Christian Franke [Thu, 17 Oct 2019 13:12:05 +0000 (15:12 +0200)]
lantiq: Fix fw_cutter LzmaWrapper

The destination buffer size `d_len` is passed to `lzma_inflate` as a
pointer. Therefore, it needs to be dereferenced to compare its content.

Signed-off-by: Christian Franke <>
(cherry picked from commit d544bc84a07f299ac1e513715301cae5fbd30923)
Signed-off-by: Daniel Golle <>
4 years agorpcd: update to latest Git HEAD
Jo-Philipp Wich [Sat, 21 Sep 2019 13:03:48 +0000 (15:03 +0200)]
rpcd: update to latest Git HEAD

95f0973 file: increase minimum read buffer size to 4096 bytes

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit 2a603cfcfccc4b20b10b7992bc07be0945345ed9)

4 years agorpcd: update to latest Git HEAD
Jo-Philipp Wich [Tue, 10 Sep 2019 13:25:12 +0000 (15:25 +0200)]
rpcd: update to latest Git HEAD

e2a7bc4 iwinfo: add WPA3 support

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit d6a405280f0156a2dad7d9cfa96695d53ed87dab)

4 years agorpcd: update to latest Git HEAD
Jo-Philipp Wich [Sun, 8 Sep 2019 16:48:15 +0000 (18:48 +0200)]
rpcd: update to latest Git HEAD

69eeb1b file: refactor message parsing and permission checking
f65527a iwinfo: expose all rate info fields in assoclist reply
7fec636 sys: fix symbol redeclaration
27c24c7 rpcd: sys: actually move timespec declaration
345363b file: add remove operation
604db20 rpcd: Switch to nanosleep

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit 2f9f8769e334d2e8d0bac4edadbcf6bcdd229519)

4 years agofwtool: do not omit final 16 byte when image does not contain signature
Jo-Philipp Wich [Thu, 17 Oct 2019 14:59:11 +0000 (16:59 +0200)]
fwtool: do not omit final 16 byte when image does not contain signature

The fwutil command will interpret the final 16 byte of a given firmware
image files as "struct fwimage_trailer".

In case these bytes do look like a valid trailer, we must ensure that we
print them out along with the remainder of the image to not accidentally
truncate non-trailer-images by 16 bytes when they're piped through fwtool,
e.g. as part of an image verification command sequence.

Some command sequences pipe images through fwtool in order to strip any
possible metadata, certificate or signature trailers and do not expect
bare images without any of that metadata to get truncated as other non-
fwtool specific metadata is expected at the end of the file, e.g. an
information block with an md5sum in case of the combined image format.

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit 889b841048c5eb7f975135cab363f1fdd9b6cfa1)

4 years agoiwinfo: update to latest Git HEAD
Jo-Philipp Wich [Wed, 16 Oct 2019 14:48:40 +0000 (16:48 +0200)]
iwinfo: update to latest Git HEAD

07315b6 nl80211: handle hidden SSIDs in wpa_supplicant scan results
3ac846e lua: fix string description of mixed WPA3 modes

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit bc61458b73c04f900c358be8b7ed37c84298472a)

4 years agobcm53xx: sysupgrade: support Luxul NAND devices
Dan Haab [Tue, 15 Oct 2019 15:35:08 +0000 (09:35 -0600)]
bcm53xx: sysupgrade: support Luxul NAND devices

This adds support for UBI-aware sysupgrade using Luxul formats.

Signed-off-by: Dan Haab <>
(cherry picked from commit 63c43e5674f346b8ed13377d551e5699afbeb673)

4 years agobrcm47xx: fix switch port labels for Asus WL500GP V2
Michael Heimpold [Fri, 20 Sep 2019 22:15:24 +0000 (00:15 +0200)]
brcm47xx: fix switch port labels for Asus WL500GP V2

The switch port naming in LuCI does not fit the physical numbers
on the front of this device. Since this is confusing, fix it.

Signed-off-by: Michael Heimpold <>
(cherry picked from commit e56e5a454e729f1067ba1fc8acfc18b99ccb88b4)