openwrt/openwrt.git
15 months agokernel: bump 4.14 to 4.14.148
Koen Vandeputte [Tue, 8 Oct 2019 13:00:32 +0000 (15:00 +0200)]
kernel: bump 4.14 to 4.14.148

Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
15 months agokernel: bump 4.14 to 4.14.147
Koen Vandeputte [Mon, 7 Oct 2019 11:04:42 +0000 (13:04 +0200)]
kernel: bump 4.14 to 4.14.147

Refreshed all patches.

Altered patches:
- 403-mtd_fix_cfi_cmdset_0002_status_check.patch (ar71xx)
- 403-mtd_fix_cfi_cmdset_0002_status_check.patch (ath79)

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Compile-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
15 months agokernel: add missing symbol when enabling PTP support
Koen Vandeputte [Fri, 4 Oct 2019 11:48:12 +0000 (13:48 +0200)]
kernel: add missing symbol when enabling PTP support

Discovered by enabling PTP_1588_CLOCK:

net/sched/Kconfig:44: warning: menuconfig statement without prompt
*
* Restart config...
*
*
* PTP clock support
*
PTP clock support (PTP_1588_CLOCK) [Y/n/?] y
Driver for the National Semiconductor DP83640 PHYTER (DP83640_PHY) [N/m/y/?] (NEW)

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
15 months agotreewide: remove 4.19 leftovers
Koen Vandeputte [Fri, 4 Oct 2019 09:27:35 +0000 (11:27 +0200)]
treewide: remove 4.19 leftovers

19.07 branch focuses on kernel 4.14
so remove all remaining 4.19 configs

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
15 months agobcm53xx: fix serial console on Luxul XWC-2000
Rafał Miłecki [Fri, 4 Oct 2019 13:46:13 +0000 (15:46 +0200)]
bcm53xx: fix serial console on Luxul XWC-2000

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit fedc5b65dc67c0687f0d1b8dafbacf8e7ab899d2)

15 months agobcm53xx: fix sysupgrade for Luxul XWC-2000
Rafał Miłecki [Fri, 4 Oct 2019 09:40:06 +0000 (11:40 +0200)]
bcm53xx: fix sysupgrade for Luxul XWC-2000

Use a correct "compatible" value as in the upstream DTS file.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 64b7dbb3000b7e8772fea40b35ac6ec717f9f822)

15 months agobcm53xx: add pending patch adding Luxul XWC-2000 DTS file
Rafał Miłecki [Fri, 4 Oct 2019 08:06:38 +0000 (10:06 +0200)]
bcm53xx: add pending patch adding Luxul XWC-2000 DTS file

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 06091afada06183f541106b3c688a5d30d85c25b)

15 months agobase-files: use get_mac_binary() in mtd_get_mac_binary_ubi()
Adrian Schmutzler [Thu, 5 Sep 2019 11:29:37 +0000 (13:29 +0200)]
base-files: use get_mac_binary() in mtd_get_mac_binary_ubi()

The actual retrieval of the MAC address in mtd_get_mac_binary_ubi()
is the same as in get_mac_binary(). Thus, use the latter function
in the former to reduce duplicate code.

This will also allow to benefit from the enhanced path check there
and bring mtd_get_mac_binary_ubi() more in line with the similar
mtd_get_mac_binary().

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit 45600124fcbd14ece6e289cb59b318ea44c598fe)

15 months agoath79: image: add supported string for routerstations and ja76pf2
Tomasz Maciej Nowak [Fri, 23 Aug 2019 13:50:50 +0000 (15:50 +0200)]
ath79: image: add supported string for routerstations and ja76pf2

Now that the md5 check is fixed and metadata present, sysupgrade on
ar71xx will complain about device not being supported by the image.
Since the cause is not matching strings for supported devices add them
accordingly.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
(cherry picked from commit a45cf75eca4069f24bf5bba8f245de2e553f7f78)

15 months agoath79: image: append metadata to routerstations and ja76pf2 images
Tomasz Maciej Nowak [Fri, 23 Aug 2019 13:50:49 +0000 (15:50 +0200)]
ath79: image: append metadata to routerstations and ja76pf2 images

This target enforces metadata check so add the necessary information. It
was previously removed because md5 sum check. When using these sysupgrade
images on ar71xx target the check would complain about them not matching.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
(cherry picked from commit 077d06a1a5a23caae4d0c53afb60913955d2a3ea)

15 months agoar71xx: sysupgrade: accept ath79 combined-image
Tomasz Maciej Nowak [Fri, 23 Aug 2019 13:50:48 +0000 (15:50 +0200)]
ar71xx: sysupgrade: accept ath79 combined-image

There is md5 sum of whole image embedded in combined-image header which
is checked on sysupgrade. The check will fail for ath79 images which
may have embedded metadata. This is because metadata are appended after
the combined image is created. To allow smooth transition from ar71xx to
ath79, strip metadata before calculating md5 sum for whole image.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
(cherry picked from commit 8b4109c2b4d60495d046157d1baca9b1cdbf8dc8)

15 months agoath79: dts: fix ja76pf2 spi frequency
Tomasz Maciej Nowak [Fri, 23 Aug 2019 13:50:46 +0000 (15:50 +0200)]
ath79: dts: fix ja76pf2 spi frequency

The frequency was filled acording the information from datasheet for
particular chip (Winbond 25Q128BVFG). Unfortunately this led to
coruption and introduced bad blocks on the chip. Reducing the frequency
to commonly used in ath79, made the board more stable and no new bad
blocks were spoted.

Fixes: b3a0c97 ("ath79: add support for jjPlus JA76PF2")
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
(cherry picked from commit c1db564cbc7cad88606f3caedf81d07b0a60931f)

15 months agoath79: Restore GL.iNet GL-AR300M-Lite first-boot connectivity
Jeff Kletsky [Sat, 28 Sep 2019 17:39:58 +0000 (10:39 -0700)]
ath79: Restore GL.iNet GL-AR300M-Lite first-boot connectivity

The relationship between GMAC0 and GMAC1 and the kernel devices
eth0 and eth1 was reversed for many ath79 devices by commit 8dde11d521
ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi

The GL-AR300M-Lite is a single-port device, with the "LAN" port of the
GL-AR300M board unpopulated and its sole port now referenced as eth1,
as a result of commit 8dde11d521. The device was unreachable on
first boot or fresh config.

By changing &eth1 (GMAC1) to an MFD, GMAC0 is able to associate with
the phy and is known by the kernel as "eth0".

Thanks to Chuanhong Guo for the suggestion of "simple-mfd"

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
(cherry picked from commit b90ea19860853dd538e704e3e4402686c316e43c)

15 months agoath79: Correct glinet, gl-ar300m-lite in 02_network
Jeff Kletsky [Sat, 28 Sep 2019 17:39:57 +0000 (10:39 -0700)]
ath79: Correct glinet, gl-ar300m-lite in 02_network

Previously, the board name for the GL-AR300M-Lite was incorrect
in 02_network, resulting in an unintended, fall-through condition
when initializing the network configuration.

While builds prior to commit 8dde11d521 (merged June 5, 2019)
    ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi
functioned properly, the error was noted in resolving first-boot
connectivity issues related to the single-phy nature of the device
and the "swap" of eth0 and eth1 related to that commit.

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
(cherry picked from commit 549ea4dc1878d95ee2b752b8840d75a64a67b679)

15 months agoipq806x: remove unsupported hw-crypto qce driver
Eneas U de Queiroz [Wed, 25 Sep 2019 15:19:15 +0000 (12:19 -0300)]
ipq806x: remove unsupported hw-crypto qce driver

The following symbols, selected by the qce driver were removed:
CONFIG_CRYPTO_CBC
CONFIG_CRYPTO_CTR
CONFIG_CRYPTO_DES
CONFIG_CRYPTO_DEV_QCE
CONFIG_CRYPTO_ECB
CONFIG_CRYPTO_NULL
CONFIG_CRYPTO_SEQIV
CONFIG_CRYPTO_XTS

CONFIG_CRYPTO_GF128MUL was removed as well, since it is only needed by
some cipher modes (LRW, GCM), none of which are selected, and it is
packaged as a module.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
15 months agoipq40xx: fix hw-crypto detection of qce driver
Eneas U de Queiroz [Fri, 20 Sep 2019 20:48:04 +0000 (17:48 -0300)]
ipq40xx: fix hw-crypto detection of qce driver

This adds the CRYPTO_ALG_KERN_DRIVER_ONLY flag to Qualcomm crypto engine
driver algorithms, so that openssl devcrypto can recognize them as
hardware-accelerated.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
[refresh, move to ipq40xx as its the only target right now]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 391b14a8927df9cfc1d503459dd772cd582a64e7)

15 months agoapm821xx: fix fan control on highest step
Christian Lamparter [Sat, 28 Sep 2019 12:31:16 +0000 (14:31 +0200)]
apm821xx: fix fan control on highest step

This patch removes a typo (extra "0") so that the 'cpu-alert6'
step is triggered once the system reaches 85°C.

Note: Unless the WNDR4700 is placed in an hot oven, the
hardware-monitor will never reach this value.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
16 months agokernel: port upstream nft_flow_offload changes to xt_FLOWOFFLOAD and fix routing...
Felix Fietkau [Wed, 25 Sep 2019 14:45:05 +0000 (16:45 +0200)]
kernel: port upstream nft_flow_offload changes to xt_FLOWOFFLOAD and fix routing issues

Replace an old cleanup patch that never made it upstream with the proper
upstream fix. This patch was incompatible with the recent changes that
affected the way that the flow tuple dst entry was used.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry-picked from commits 442ecce76169d and c8933ce533656)

16 months agonetfilter: fix crash in flow offload by adding netns support
HsiuWen Yen [Thu, 20 Jun 2019 16:44:42 +0000 (00:44 +0800)]
netfilter: fix crash in flow offload by adding netns support

Commit fcb41decf6c6 ("config: enable some useful features on
!SMALL_FLASH devices") enabled netns, which in turn lead to the crash in
the flow offload target.

When the flow offloading framework intends to delete a flow from the
hardware table, it is necessary to retrieve the namespace from
nf_flowtable->ft_net. However, no one ever wrote the namespace into
nf_flowtable->ft_net in advance. So the framework will mistakenly use a
NULL namespace to execute dev_get_by_index_rcu(net, ifindex), leading to
the kernel panic.

Ref: FS#2321
Fixes: fcb41decf6c6 ("config: enable some useful features on !SMALL_FLASH devices")
Tested-by: Simon Tretter <simon@mediaarchitectu.re>
Signed-off-by: HsiuWen Yen <y.hsiuwen@gmail.com>
[merged patch into offload patch, fix for 4.19, SOB fix, commit subj/msg touches]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(cherry-picked from commit d344591e72e5ca96a2bf70a2df38961553185ce8)

16 months agobrcm47xx: sysupgrade: fix device model detection
Rafał Miłecki [Thu, 26 Sep 2019 04:45:11 +0000 (06:45 +0200)]
brcm47xx: sysupgrade: fix device model detection

$(board_name) was providing content on "boardtype" (and optionally
"boardnum") NVRAM values. That function requires & expects more specific
and detailed model name extracted from the /proc/cpuinfo.

Fixes: f12a32630ff5 ("treewide: use the generic board_name function")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
16 months agouboot-fritz4040: update to 2019-09-07
David Bauer [Tue, 24 Sep 2019 23:52:14 +0000 (01:52 +0200)]
uboot-fritz4040: update to 2019-09-07

572ff7f fritzcreator: actually add checksum spacer
6edce1a fritzcreator: replace obscure padding generation with something more portable
2ff189f add ASUS RT-AC58U "easy install" factory u-boot shim
b91f9c2 readd spi-nand support
486ae53 improve cmd_sysupgrade
b0933f1 replace sstrip with strip
882e48a do not include generated files into git
0c5aa5f fix bugs in ipq40xx_cdp.c

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit af63436d2d0dc3c07d1cb11b018e486994942c6c)

16 months agoipq40xx: abort ar40xx probe on missing PHYs
David Bauer [Sun, 22 Sep 2019 17:15:56 +0000 (19:15 +0200)]
ipq40xx: abort ar40xx probe on missing PHYs

The ar40xx driver currently panics in case no QCA807x PHY has been
successfully probed. This happens when the external PHY is still
in reset when probing the ar40xx switch driver.

Note that this patch does not fix the root cause, ar40xx_probe now
simply fails instead of causing a kernel panic due to a nullpointer
dereference.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit e2c084cabc2b2a2fffc36aee3e48874f9862c74a)

16 months agoath10k-ct: update to version 2019-09-09
Koen Vandeputte [Tue, 24 Sep 2019 09:58:54 +0000 (11:58 +0200)]
ath10k-ct: update to version 2019-09-09

5e8cd86f90da ath10k-ct: Backport ap-vlan code from 5.2 to 4.20 and 4.19 drivers.
0c518586bd7f ath10k-ct: Fix a few warning splats.

Adds AP VLAN.
Refreshed all patches.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agoath10k-firmware: update Candela Tech firmware images
Robert Marko [Fri, 13 Sep 2019 10:15:37 +0000 (12:15 +0200)]
ath10k-firmware: update Candela Tech firmware images

This enables a feature flag in the wave-2 firmware wmi-services indicating it can send
software-encrypted raw frames.  This should in turn allow the AP-VLAN feature to work.

Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit 7c930990af911f6634b422d7253f09df2bb164bf)

16 months agokernel: bump 4.14 to 4.14.146
Koen Vandeputte [Tue, 24 Sep 2019 08:58:34 +0000 (10:58 +0200)]
kernel: bump 4.14 to 4.14.146

Refreshed all patches.

Fixes:
- CVE-2019-14814
- CVE-2019-14815
- CVE-2019-14816
- CVE-2019-14821

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agokernel: add disable_eap_hack sysfs attribute
Etienne Champetier [Wed, 4 Sep 2019 17:15:51 +0000 (10:15 -0700)]
kernel: add disable_eap_hack sysfs attribute

We are not sure if 640-bridge-only-accept-EAP-locally.patch is still needed
as a first step, add disable_eap_hack sysfs config to allow to disable it

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
(cherry picked from commit 7d542dc8047d276517b296132926e722004065e0)

16 months agoopenssl: bump to 1.1.1d
Eneas U de Queiroz [Tue, 17 Sep 2019 13:52:11 +0000 (10:52 -0300)]
openssl: bump to 1.1.1d

This version fixes 3 low-severity vulnerabilities:

- CVE-2019-1547: ECDSA remote timing attack
- CVE-2019-1549: Fork Protection
- CVE-2019-1563: Padding Oracle in PKCS7_dataDecode and
 CMS_decrypt_set1_pkey

Patches were refreshed.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit d868d0a5d7e1d76bb1a8980346d222fae55fa18b)

16 months agoath79: remove invalid uses of ath9k_patch_fw_mac_crc
Adrian Schmutzler [Wed, 18 Sep 2019 15:11:06 +0000 (17:11 +0200)]
ath79: remove invalid uses of ath9k_patch_fw_mac_crc

Some ar9344-based devices are using ath9k_patch_fw_mac_crc, which
is meant to generate a checksum, for fixing their ath9k MAC
addresses.
However, those do not have a checksum field, and the calculated
checksum offset would be negative.

This patch will use ath9k_patch_fw_mac function for those devices.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit f8d8b3f85d70a85d4fabc9b8ed4dbc8020be0523)

16 months agohostapd: Fix AP mode PMF disconnection protection bypass
Hauke Mehrtens [Fri, 20 Sep 2019 20:20:16 +0000 (22:20 +0200)]
hostapd: Fix AP mode PMF disconnection protection bypass

This fixes
* CVE-2019-16275 AP mode PMF disconnection protection bypass
https://w1.fi/security/2019-7/ap-mode-pmf-disconnection-protection-bypass.txt

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit a6981604b30bc1ddc1713b368fe853d89c2ba40d)

16 months agouClibc++: Remove faulty patch
Rosen Penev [Fri, 20 Sep 2019 00:39:15 +0000 (17:39 -0700)]
uClibc++: Remove faulty patch

This patch was originally added to fix compilation with v4l2rtspserver.
Turns out it was v4l2rtspserver that was broken, not uClibc++. This now
causes issues with a different package where the arguments are being
split.

Note that with this patch, shellcheck throws an error:

SC2068: Double quote array expansions to avoid re-splitting elements.

More: https://github.com/openwrt/packages/pull/9972#discussion_r324878373

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 977a8fc5fc2e1be6d159b2d9e1c617826b5d9701)

16 months agombedtls: update to 2.16.3
Magnus Kroken [Wed, 18 Sep 2019 19:22:16 +0000 (21:22 +0200)]
mbedtls: update to 2.16.3

Remove 300-bn_mul.h-Use-optimized-MULADDC-code-only-on-ARM-6.patch,
the issue has been fixed upstream.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
(cherry picked from commit 49d96ffc5c47e40b7f3d99a91a42ea8a54a38bd9)

16 months agoltq-vdsl-fw: update firmware filename and download URL
Daniel Golle [Sat, 21 Sep 2019 13:09:55 +0000 (15:09 +0200)]
ltq-vdsl-fw: update firmware filename and download URL

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 4fc0a61ed3da96330d30703a2a039a6a06dc0b2f)

16 months agokernel: add module for Emulex OneConnect 10Gbit
Alberto Bursi [Sun, 15 Sep 2019 22:54:20 +0000 (00:54 +0200)]
kernel: add module for Emulex OneConnect 10Gbit

add module to support Emulex OneConnect
common in 10Gbit SFP+ cards by Dell/HP/IBM
supports OneConnect OCe10xxx OCe11xxx OCe14xxx,
LightPulse LPe12xxx

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
(cherry picked from commit 827f47749b75dcc6b650297b9303c27127b15201)

16 months agokernel: bump 4.14 to 4.14.145
Koen Vandeputte [Fri, 20 Sep 2019 13:09:15 +0000 (15:09 +0200)]
kernel: bump 4.14 to 4.14.145

Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agokernel: bump 4.14 to 4.14.144
Koen Vandeputte [Wed, 18 Sep 2019 13:04:48 +0000 (15:04 +0200)]
kernel: bump 4.14 to 4.14.144

Refreshed all patches.

Altered patches:
- 816-pcie-support-layerscape.patch

Fixes:
- CVE-2019-15030

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agoprocd: fix invalid JSON filter expression in procd_running()
Jo-Philipp Wich [Thu, 19 Sep 2019 05:16:49 +0000 (07:16 +0200)]
procd: fix invalid JSON filter expression in procd_running()

Since service and instance names may contain characters which are not allowed
in JSON path labels, such as dashes or spaces, change the filter expression
to array square bracket notation to properly match these cases as well.

Fixes: 2c3dd70741 ("procd: add procd_running() helper for checking running state")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit c933b6d22478c1113629ef549beea6337f978d62)

16 months agofirewall: update to latest Git HEAD
Jo-Philipp Wich [Wed, 18 Sep 2019 09:01:29 +0000 (11:01 +0200)]
firewall: update to latest Git HEAD

383eb58 ubus: do not overwrite ipset name attribute
c26f890 firewall3: fix typo that affects ICMPv6 rules with numeric icmp_type
487bd0d utils: Fix string format message
4d0c703 firewall3: Fix some format string problems
8c404ef iptables.c: lock the xtables.lock
c1d3a4d utils: implement fw3_lock_path() & fw3_unlock_path()

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
[cherry picked and squashed from commits
 7db655991443a98f84e4c39e733232d41d2d6137,
 359bff605244c2cf2bff75bce0f0b16b496a6a77,
 2cf209ce9166575d8259b5b4176ee91d8b48d2ff,
 5ef9e4f107a94c502908403fdf56cf6bcdc08dd2]
Ref: https://forum.openwrt.org/t/fw3-ipset-procd-objects/44044
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
16 months agoprocd: update to the latest git HEAD
Rafał Miłecki [Wed, 18 Sep 2019 05:33:01 +0000 (07:33 +0200)]
procd: update to the latest git HEAD

62dc8c0 system: sysupgrade: send reply on error
2710c65 system: refuse sysupgrade with backup if it's unsupported

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 04e912d21720b2d906d84aaf172af79a25076a41)

16 months agoramips: add factory image for NETGEAR R6220
David Bauer [Tue, 27 Aug 2019 21:55:12 +0000 (23:55 +0200)]
ramips: add factory image for NETGEAR R6220

This adds an easy-installation factory image for the NETGEAR R6220
router. The factory image can either be flashed via the vendor Web-UI or
the bootloader using nmrpflash.

Tested with NETGEAR V1.1.0.86 firmware.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 607dfdf211bebb5043cbc0267c1e2c3e3c2514b4)

16 months agobrcm47xx: sysupgrade: support Luxul firmware format
Dan Haab [Mon, 16 Sep 2019 15:18:37 +0000 (09:18 -0600)]
brcm47xx: sysupgrade: support Luxul firmware format

Allow flashing Luxul devices using vendor firmware format.

Signed-off-by: Dan Haab <dan.haab@legrand.com>
(cherry picked from commit 95240c4933607544ad1788c2ed19843dd96bccbb)

16 months agobcm53xx: sysupgrade: support Luxul firmware format
Dan Haab [Thu, 12 Sep 2019 17:14:19 +0000 (11:14 -0600)]
bcm53xx: sysupgrade: support Luxul firmware format

Allow flashing Luxul devices using vendor firmware format. The next step
will be building proper images once they are conirmed to work.

Signed-off-by: Dan Haab <dan.haab@legrand.com>
(cherry picked from commit bc5db7364d1e00be5bbe5444e81c40571fbd696d)

16 months agomac80211: brcmfmac: backport the last 5.4 changes
Rafał Miłecki [Mon, 16 Sep 2019 06:04:27 +0000 (08:04 +0200)]
mac80211: brcmfmac: backport the last 5.4 changes

This makes brcmfmac use the same wiphy after PCIe reset to help user
space handle corner cases (e.g. firmware crash).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit f39f4b2f6d4300995270f635261b07197e8cf61e)

16 months agoar71xx: fix typo in platform_do_upgrade_compex()
Rafał Miłecki [Mon, 16 Sep 2019 04:59:09 +0000 (06:59 +0200)]
ar71xx: fix typo in platform_do_upgrade_compex()

Fixes: a71742882855 ("treewide: use new procd sysupgrade $UPGRADE_BACKUP variable")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 63d611390c4d34a838e744e278529f30f9d2cc20)

16 months agotreewide: sysupgrade: use $UPGRADE_BACKUP to check for backup
Rafał Miłecki [Fri, 6 Sep 2019 05:10:54 +0000 (07:10 +0200)]
treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup

Now that $UPGRADE_BACKUP is set conditionally there is no need to check
the $UPGRADE_OPT_SAVE_CONFIG anymore. All conditions can be simplified.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit a858db313687ddfa6ed1ddba76bd74844a7b89dc)

16 months agoprocd: update to the latest git HEAD
Rafał Miłecki [Wed, 11 Sep 2019 07:03:36 +0000 (09:03 +0200)]
procd: update to the latest git HEAD

b8238df sysupgrade: support "backup" attribute

This update requires "sysupgrade" method callers to pass "backup"
attribute if $UPGRADE_BACKUP is used in the project.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 9785a9121d2d7a0a25bcd2924ee78fafada056da)

16 months agobase-files: sysupgrade: pass "backup" ubus attribute
Rafał Miłecki [Fri, 6 Sep 2019 05:10:52 +0000 (07:10 +0200)]
base-files: sysupgrade: pass "backup" ubus attribute

This explicitly tells procd what backup file should be used during
sysupgrade (if any). It's much more generic this way compared to the
magic /tmp/sysupgrade.tgz file that had to be created before a call.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit c5223b26a40ae61fc7750bf865464048af328ab1)

16 months agoodhcpd: retry failed PD assignments on addrlist change
Hans Dedecker [Sun, 15 Sep 2019 18:49:34 +0000 (20:49 +0200)]
odhcpd: retry failed PD assignments on addrlist change

88d9ab6 dhcpv6: retry failed PD assignments on addrlist change

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
16 months agoscripts/feeds: fix accepting "-" in feed type string
Felix Fietkau [Sun, 15 Sep 2019 17:53:17 +0000 (19:53 +0200)]
scripts/feeds: fix accepting "-" in feed type string

Fixes a syntax error in processing the type src-git-full

Signed-off-by: Felix Fietkau <nbd@nbd.name>
16 months agoath79: fix UniFi AC LED mapping
David Bauer [Fri, 6 Sep 2019 22:43:19 +0000 (00:43 +0200)]
ath79: fix UniFi AC LED mapping

The UniFi AC LED mapping is currently off. The blue/white LED are used
as WiFi indicators, while the vendor firmware does not feature WiFI
LEDs.

Instead, the LEDs are used to indicate the devices status. Align the LED
mapping to match the vendor firmware as good as possible.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 18fa749df8bd9fe292c93f60ddd3fb963a78274a)

16 months agoiwinfo: update to latest Git HEAD
David Bauer [Sun, 8 Sep 2019 13:48:43 +0000 (15:48 +0200)]
iwinfo: update to latest Git HEAD

a88fb42 iwinfo: add device id for Qualcomm Atheros QCA9886
1b69d86 iwinfo: add device id for Qualcomm Atheros QCA9887

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 7db2f1a71f202023154e80758079193fc47352eb)

16 months agoar71xx: make IRQ fixes target specific
Koen Vandeputte [Sat, 14 Sep 2019 14:28:40 +0000 (16:28 +0200)]
ar71xx: make IRQ fixes target specific

Move the IRQ fix from generic to ar71xx specific.
Other targets like ath79 have specific pathes to delete this code.
This resulted in a build failure on ath79

Fixes: 00d48bcac08a ("ar71xx: Fix potentially missed IRQ handling during
dispatch")

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agoar71xx: fix potential IRQ misses during dispatch for qca953x
Koen Vandeputte [Wed, 11 Sep 2019 10:47:27 +0000 (12:47 +0200)]
ar71xx: fix potential IRQ misses during dispatch for qca953x

If both interrupts are set in the current implementation
only the 1st will be handled and the 2nd will be skipped
due to the "if else" condition.

Fix this by using the same approach as done for QCA955x
just below it.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit 9e8c36557cc0582986862f5a36e17adf6db2b90e)

16 months agoar71xx: Fix potentially missed IRQ handling during dispatch
Koen Vandeputte [Wed, 11 Sep 2019 10:28:36 +0000 (12:28 +0200)]
ar71xx: Fix potentially missed IRQ handling during dispatch

If both interrupts are set in the current implementation
only the 1st will be handled and the 2nd will be skipped
due to the "if else" condition.

Fix this by using the same approach as done for QCA955x
just below it.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agokernel: bump 4.14 to 4.14.143
Koen Vandeputte [Wed, 11 Sep 2019 09:22:19 +0000 (11:22 +0200)]
kernel: bump 4.14 to 4.14.143

Refreshed all patches.

Remove upstreamed:
- 390-v5.3-net-sched-fix-action-ipt-crash.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agobase-files: validate firmware for compatibility with backup
Rafał Miłecki [Thu, 5 Sep 2019 11:08:13 +0000 (13:08 +0200)]
base-files: validate firmware for compatibility with backup

This allows platform code to check if firmware image can be used with
preserving a backup. It may be used e.g. when installing vendor
firmwares that won't restore appended backup archive.

Suggested-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 1c510fe2980cd787602786e82f44602549d607d4)

16 months agobcm53xx: extend firmware validation
Rafał Miłecki [Fri, 6 Sep 2019 10:44:49 +0000 (12:44 +0200)]
bcm53xx: extend firmware validation

This provides TRX validation result to the validation JSON. It also
prevents users from installing broken firmware files.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit c19b9f9a2623c110222210d04f75ace0e594c7e9)

16 months agobrcm47xx: extend firmware validation
Rafał Miłecki [Wed, 4 Sep 2019 04:35:31 +0000 (06:35 +0200)]
brcm47xx: extend firmware validation

This provides TRX validation result, so final JSON may look like:
{
"tests": {
"fwtool_signature": true,
"fwtool_device_match": true,
"trx_valid": true
},
"valid": true,
"forceable": true
}

It also prevents users from installing broken firmware files, e.g.:

root@OpenWrt:/# sysupgrade -F -n /tmp/TZ
Image metadata not found
Invalid image type. Please use firmware specific for this device.
Image check failed but --force given - will update anyway!
Commencing upgrade. Closing all shell sessions.
Firmware image is broken and cannot be installed

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit e68c1cebd1d87ce60f0646688e437e83081e2322)

16 months agotreewide: use new procd sysupgrade $UPGRADE_BACKUP variable
Rafał Miłecki [Thu, 5 Sep 2019 21:33:19 +0000 (23:33 +0200)]
treewide: use new procd sysupgrade $UPGRADE_BACKUP variable

It's a variable set by procd that should replace hardcoded
/tmp/sysupgrade.tgz.

This change requires the most recent procd with the commit 0f3c136
("sysupgrade: set UPGRADE_BACKUP env variable").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 641f6b6c26cb9ab5e1198810015e5f4b2b5b34ad)

16 months agotreewide: when copying a backup file always specify dest name
Rafał Miłecki [Wed, 4 Sep 2019 14:57:40 +0000 (16:57 +0200)]
treewide: when copying a backup file always specify dest name

$CONF_TAR shouldn't be assumed to always point to the sysupgrade.tgz.
This change makes code more generic and allows refactoring $CONF_TAR.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 62dbe361a1b1ed1506bc0387bff55eddcb619e49)

16 months agotreewide: don't hardcode "sysupgrade.tgz" file name
Rafał Miłecki [Wed, 4 Sep 2019 14:57:39 +0000 (16:57 +0200)]
treewide: don't hardcode "sysupgrade.tgz" file name

1) Add BACKUP_FILE and use it when copying an archive to be restored
   after sysupgrade (on the next preinit).
2) Use CONF_TAR for copying backup prepared by the /sbin/sysupgrade

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit bf390478727ac5f4f9d6fb684de48b8150bcec67)

16 months agotools: mkimage: fix __u64 typedef conflict with new glibc
Yousong Zhou [Wed, 11 Sep 2019 13:25:17 +0000 (13:25 +0000)]
tools: mkimage: fix __u64 typedef conflict with new glibc

Including "sys/stat.h" from newer glibc will cause __u64 from linux uapi
header to be included, causing compilation failure for u-boot tools
USE_HOSTCC

Remove typedef for __u64 in include/compiler.h to fix the issue.  It should be
safe because as of u-boot-2018.03, no ref to __u64 is found under u-boot tools/
directory

Error message snippet follows

  HOSTCC  tools/mkenvimage.o
In file included from /usr/include/asm-generic/types.h:7,
 from /usr/include/asm/types.h:5,
 from /usr/include/linux/types.h:5,
 from /usr/include/linux/stat.h:5,
 from /usr/include/bits/statx.h:30,
 from /usr/include/sys/stat.h:446,
 from tools/mkenvimage.c:21:
/usr/include/asm-generic/int-ll64.h:31:42: error: conflicting types for '__u64'
   31 | __extension__ typedef unsigned long long __u64;
      |                                          ^~~~~
In file included from <command-line>:
././include/compiler.h:69:18: note: previous declaration of '__u64' was here
   69 | typedef uint64_t __u64;
      |                  ^~~~~
make[5]: *** [scripts/Makefile.host:116: tools/mkenvimage.o] Error 1

Ref: https://forum.openwrt.org/t/compile-error-19-07/44423
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1699194
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
16 months agoRevert "ar71xx: use platform code for qca955x usb0 init"
Koen Vandeputte [Wed, 11 Sep 2019 21:40:42 +0000 (23:40 +0200)]
Revert "ar71xx: use platform code for qca955x usb0 init"

This reverts commit af91a370de2b94a37b8a87a9f95503e96dfcb744.

As Piotr Dymacz pointed out:

In QCA MIPS based WiSOCs, for first USB interface,
device/host mode can be selected _only_ in hardware
see description of 57c641ba6e

QCA955x and QCA9563, second USB can be switched to device
mode in software (tested and confirmed on real hardware).

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agoar71xx: qca955x pci init/reset fixes
Tomislav Požega [Tue, 3 Sep 2019 22:48:37 +0000 (00:48 +0200)]
ar71xx: qca955x pci init/reset fixes

Current ar724x code does the reset only on single pci bus, and
in case of qca9558 writes the wrong register (0x10 vs 0x0c).
This change allows the reset of second pci bus, commonly used in
Archer C7 devices, in case host controller is stuck in reset.
If the resetting controller on boot can solve any other issue it
can be enabled unconditionally by removing reset check before
ar724x_pci_hw_init is called.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
[refreshed to apply cleanly]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit 76d870871cb12fc0c170e5fd23bce568adfaae6d)

16 months agoar71xx: enable ddr wb flush on qca955x
Tomislav Požega [Tue, 3 Sep 2019 15:10:31 +0000 (17:10 +0200)]
ar71xx: enable ddr wb flush on qca955x

Enable flushing of write buffers on qca955x. GPL code has 0x88 reg
defined for PCI flush which is likely an error since the device
freezes on boot. So use DS default value 0xA8 for PCI flush.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
(cherry picked from commit fe9e702dc94ece2a004f6db68d6fb9a94d9437cb)

16 months agoar71xx: use platform code for qca955x usb0 init
Tomislav Požega [Tue, 3 Sep 2019 15:04:17 +0000 (17:04 +0200)]
ar71xx: use platform code for qca955x usb0 init

Switch from ci_usb_setup to generic platform initialization of
usb0 port.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
(cherry picked from commit 36a0cfd24be1cb79f221964ed2bfe12b98befff3)

16 months agokernel: bump 4.14 to 4.4.142
Koen Vandeputte [Mon, 9 Sep 2019 10:42:26 +0000 (12:42 +0200)]
kernel: bump 4.14 to 4.4.142

Refreshed all patches.

Remove upstreamed:
- 0032-usb-host-fotg2-restart-hcd-after-port-reset.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agohostapd: SAE/EAP-pwd side-channel attack update
Hauke Mehrtens [Sun, 8 Sep 2019 21:53:18 +0000 (23:53 +0200)]
hostapd: SAE/EAP-pwd side-channel attack update

Fixes this security problem:
* SAE/EAP-pwd side-channel attack update
https://w1.fi/security/2019-6/sae-eap-pwd-side-channel-attack-update.txt

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 7bed9bf10fc8d05df34c7efc66e8b4ade37a1a0c)

16 months agohostapd: Fix security problem in EAP-pwd
Hauke Mehrtens [Sun, 8 Sep 2019 21:27:04 +0000 (23:27 +0200)]
hostapd: Fix security problem in EAP-pwd

This fixes:
CVE-2019-11555 "EAP-pwd message reassembly issue with unexpected fragment"
https://w1.fi/security/2019-5/eap-pwd-message-reassembly-issue-with-unexpected-fragment.txt

This should not affect OpenWrt in the default settings as we do not use
EAP-pwd.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 9f34bf51d60a237696b1d4cc9b5f4835b95e7ea2)

16 months agoramips: fix ethernet MAC address of ASUS RT-AC57U
Adrian Schmutzler [Sat, 7 Sep 2019 15:05:35 +0000 (17:05 +0200)]
ramips: fix ethernet MAC address of ASUS RT-AC57U

This backports the only non-cosmetic fix from 6640e1c3681b
("ramips: clean and improve MAC address setup in 02_network").

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
16 months agoramips: fix duplicate network setup for dlink, dir-615-h1
Adrian Schmutzler [Sat, 7 Sep 2019 15:05:34 +0000 (17:05 +0200)]
ramips: fix duplicate network setup for dlink, dir-615-h1

In 555ca422d1cb ("ramips: fix D-Link DIR-615 H1 switch port
mapping"), port setup for dir-615-h1 was changed without removing
the old one. This was working as the new one was triggered earlier
than the old one.

(In the meantine, changed sorting during ramips rename patches
actually inversed that order.)

Anyway, just remove the wrong case now.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit e35e4a996e26f17b69d200505ecea78af96a2704)

16 months agoramips: remove duplicate case for MAC setup of freestation5
Adrian Schmutzler [Sat, 7 Sep 2019 15:05:33 +0000 (17:05 +0200)]
ramips: remove duplicate case for MAC setup of freestation5

ARC FreeStation5 is present twice in MAC address setup.

>From older commits/changes, it is not possible to reconstruct
the correct choice only by reading the annotations.

Thus, remove the second case and keep the first one, so behavior
stays the same (as nobody seems to have complained about it).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit ad4eb2241b33b05b0942a3fa7ed2e53fb6e84386)

16 months agomac80211: brcmfmac: backport more kernel 5.4 changes
Rafał Miłecki [Mon, 9 Sep 2019 07:37:53 +0000 (09:37 +0200)]
mac80211: brcmfmac: backport more kernel 5.4 changes

Patch getting RAM info got upstreamed. A debugging fs entry for testing
reset feature was added.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 681acdcc54d2e59135bb706c38bed942f74ccf74)

16 months agomt7620: disable image generation for Nexx WT3020 (4MB)
Hauke Mehrtens [Sun, 8 Sep 2019 19:08:22 +0000 (21:08 +0200)]
mt7620: disable image generation for Nexx WT3020 (4MB)

Image generation is currently failing on builbots due to the following
error:

WARNING: Image file openwrt-19.07-snapshot-r10495-db5164d3d0-ramips-mt7620-wt3020-4M-squashfs-factory.bin is too big

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
16 months agoapm821xx: Make patches apply again
Hauke Mehrtens [Sun, 8 Sep 2019 17:43:50 +0000 (19:43 +0200)]
apm821xx: Make patches apply again

This patch was applied to the upstream kernel in version 4.14.135,
remove it from our patches directory.

Fixes: 40379b0ec64d ("apm821xx: fix bogus key-presses on boot")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
16 months agoRevert "build: remove harmful -nopad option from mksquashfs"
Jonas Gorski [Fri, 6 Sep 2019 12:55:36 +0000 (14:55 +0200)]
Revert "build: remove harmful -nopad option from mksquashfs"

This reverts commit 1c0290c5cc6258c48b8ba46b4f9c85a21de4f875.

Dropping the nopad can make the padding overflow into the next erase
block on devices using a non-aligned rootfs start. This breaks the jffs2
overlay partition with the following messages:

[   30.343877] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
[   30.376512] jffs2: Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
[   30.385253] jffs2: empty_blocks 196, bad_blocks 0, c->nr_blocks 197

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
(cherry picked from commit f11d90a76b719106336b94d85b166b4ebf19dbb0)

16 months agoipq40xx: fix AVM NAND caldata extraction
David Bauer [Mon, 12 Aug 2019 23:44:03 +0000 (01:44 +0200)]
ipq40xx: fix AVM NAND caldata extraction

The AVM Fritz!Box 7530 (and probably other AVM IPQ4019 NAND devices)
has it's caldata not stored consistently, but instead at currently
3 known possible offsets.

As we get a non-zero exit code from fritz_cal_extract, simply try all
three possible offsets on both bootloader partitions, until a matching
caldata for each radio is found.

Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit a6f85b81b7efd3fa3265d70e5406275b2dc03f5f)

16 months agokernel: net_sched: fix a NULL pointer deref in ipt action
Cong Wang [Sun, 25 Aug 2019 12:35:06 +0000 (05:35 -0700)]
kernel: net_sched: fix a NULL pointer deref in ipt action

The net pointer in struct xt_tgdtor_param is not explicitly
initialized therefore is still NULL when dereferencing it.
So we have to find a way to pass the correct net pointer to
ipt_destroy_target().

The best way I find is just saving the net pointer inside the per
netns struct tcf_idrinfo, which could make this patch smaller.

Fixes: 0c66dc1ea3f0 ("netfilter: conntrack: register hooks in netns when needed by ruleset")
Reported-and-tested-by: Tony Ambardar <itugrok@xxxxxxxxx>
Cc: Jamal Hadi Salim <jhs@xxxxxxxxxxxx>
Cc: Jiri Pirko <jiri@xxxxxxxxxxx>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
[Backport for kernel v4.19 and v4.14]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204681]
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
(cherry picked from commit 7735cce0c5c306bd9eea20ca2805e4a492c02be9)

16 months agomvebu: sysupgrade: don't use $ARGV in platform_check_image()
Rafał Miłecki [Sun, 14 Jul 2019 16:59:59 +0000 (18:59 +0200)]
mvebu: sysupgrade: don't use $ARGV in platform_check_image()

sysupgrade passes image path to platform_check_image() as an argument so
it can be simply accessed using $1

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 76e43c82b55518b794ac24f9acfb3888c638f99b)
[rmilecki: dropping ARGV without this change broke sysupgrade]
Fixes: 6ac62c4b6cae ("base-files: don't set ARGV and ARGC")

16 months agotreewide: sysupgrade: don't use $ARGV in platform_do_upgrade()
Rafał Miłecki [Sun, 14 Jul 2019 17:03:19 +0000 (19:03 +0200)]
treewide: sysupgrade: don't use $ARGV in platform_do_upgrade()

stage2 passes image path to platform_do_upgrade() as an argument so it
can be simply accessed using $1

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 8b4bc7abe073489a3595eeb2d81818852319c148)
[rmilecki: dropping ARGV without this change broke sysupgrade]
Fixes: 6ac62c4b6cae ("base-files: don't set ARGV and ARGC")

16 months agoodhcp6c: update to latest git HEAD
Hans Dedecker [Sat, 7 Sep 2019 11:08:27 +0000 (13:08 +0200)]
odhcp6c: update to latest git HEAD

e199804 dhcpv6: sanitize oro options

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit 1855c237948e211849d79765ca749cdea6a79987)

16 months agoath79: correct OCEDO Ursus phy-mode property
David Bauer [Sat, 31 Aug 2019 14:47:31 +0000 (16:47 +0200)]
ath79: correct OCEDO Ursus phy-mode property

This fixes the previously incorrect phy-mode for the OCEDO Ursus GMAC0.

See 62abbd587dc9 ("ath79: correct various phy-mode properties")
for more details.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 7b137e9df920926dbd92f12450d9955c2759c92b)

16 months agoramips: fix network setup for various NETGEAR boards
David Bauer [Fri, 30 Aug 2019 20:41:18 +0000 (22:41 +0200)]
ramips: fix network setup for various NETGEAR boards

There are currently the following issues present for the Netgear R6220,
R6350 and WNDR3700 v5:

 - LAN and WAN MAC-addresses are inverted
 - WAN MAC-address is off. It are +2 compared to the LAN MAC-address
   (R6350 only)
 - Switchport order is inverted in LuCi

This commit fixes both these issues by assigning correct MAC-addresses
to LAN and WAN interfaces and defining the switchports with the correct
labels.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 13937a16d40693df67d3d39faa3a80644bdb7abf)

16 months agoramips: use phy trigger for various Netgear boards
David Bauer [Fri, 30 Aug 2019 18:11:45 +0000 (20:11 +0200)]
ramips: use phy trigger for various Netgear boards

This commit switches the default trigger for the WiFi LED from a netdev
trigger on "wlan0" to a wireless-phy based trigger. THis allows the LED
to work, even when the wireless interface is not named "wlan0" without
modifiying the LED settings.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit fa46c9b208fe3833f085e9f6ddf7c492b16f6c34)

16 months agoramips: disable badblock shifting for MT7621 NAND
David Bauer [Wed, 28 Aug 2019 21:40:51 +0000 (23:40 +0200)]
ramips: disable badblock shifting for MT7621 NAND

The MediaTek MT7621 NAND driver currently intransparently shifts NAND
pages when a block is marked as bad. Because of this, offsets for e.g.
caldata and MAC-addresses seem to be off.

This is, howeer, not a task for the mtd NAND driver, as the flash
translation layer is tasked with this.

This patch disables this badblock shifting. This fix was originally
proposed by Jo-Philipp Wich at
https://bugs.openwrt.org/index.php?do=details&task_id=1926

Fixes FS#1926 ("MTD partition offset not correctly mapped when bad
eraseblocks present")
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 527832e54bf3bc4d699a145ae66f34230246f0a9)

16 months agotreewide: fix invalid UPGRADE_OPT_SAVE_CONFIG spellings
Rafał Miłecki [Thu, 5 Sep 2019 06:53:44 +0000 (08:53 +0200)]
treewide: fix invalid UPGRADE_OPT_SAVE_CONFIG spellings

That was a result of accidentally running "sed" twice on some files.

Fixes: 9b9412d55cca ("treewide: replace remaining (not working now) $SAVE_CONFIG uses")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 1078de96e315f3cc2675b2c5935009e8c6159ad4)

16 months agotreewide: replace remaining (not working now) $SAVE_CONFIG uses
Rafał Miłecki [Thu, 5 Sep 2019 06:40:29 +0000 (08:40 +0200)]
treewide: replace remaining (not working now) $SAVE_CONFIG uses

This var has been replaced by the $UPGRADE_OPT_UPGRADE_OPT_SAVE_CONFIG

Fixes: f25d164aca80 ("base-files: pass "save_config" option to the "sysupgrade" method")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 5797fe84a3b508483f7d82e177157c1bf2f342d9)

16 months agoprocd: update to the latest git HEAD
Rafał Miłecki [Thu, 5 Sep 2019 21:16:17 +0000 (23:16 +0200)]
procd: update to the latest git HEAD

0f3c136 sysupgrade: set UPGRADE_BACKUP env variable
0bcbbbf system: fix uninitialized variables in firmware validation code

This update includes a fix for uninitialized variable usage.

Fixes: db5164d3d056 ("procd: update to the latest git HEAD")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit e8dcbbc865cb6acef1cfbafe77f30c1f003c3dc3)

16 months agoprocd: update to the latest git HEAD
Rafał Miłecki [Wed, 4 Sep 2019 09:12:44 +0000 (11:12 +0200)]
procd: update to the latest git HEAD

34ac88c system: reject sysupgrade of invalid firmware images by default
f55c235 system: reject sysupgrade of broken firmware images
e990e21 system: add "validate_firmware_image" ubus method

This update changes "sysupgrade" ubus method API. It's now required to
pass "force" attribute whenever invalid firmware is meant to be
installed.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 7290963d0992b9aa412e0066dcf721857fbd40f7)

16 months agobase-files: pass "force" parameter to the "sysupgrade" call
Rafał Miłecki [Tue, 3 Sep 2019 12:44:40 +0000 (14:44 +0200)]
base-files: pass "force" parameter to the "sysupgrade" call

This makes sysupgrade work with the most recent procd that validates
firmware before proceeding.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit b71962da16c2e2b93d633d7bde1436b3da2bf740)

16 months agoupslug2: Update to git repository
Rosen Penev [Thu, 8 Aug 2019 22:57:56 +0000 (15:57 -0700)]
upslug2: Update to git repository

This has two improvements over the current version. An autotools fix and
application of the wrt350v2 patch.

Cleaned up Makefile as a result of makefiles being fixed.

Note that this package is not really used as it depends on orion, which is
classified as broken.

This is the last package that uses svn in the tree.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit ac31ec0f62af31cdbc348911503bae8c152f8516)

16 months agosdk: use bundle-libraries.sh to ship kernel objtool tools
Jo-Philipp Wich [Fri, 30 Aug 2019 13:45:06 +0000 (15:45 +0200)]
sdk: use bundle-libraries.sh to ship kernel objtool tools

Ensure that the kernel objtool utilities are processed by the library
bundler in order to ensure that they're usable on foreign systems with
different libc versions.

Fixes: a9f6fceb42 ("sdk: fix building external modules when CONFIG_STACK_VALIDATION=y")
Acked-by: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit efaaadb49e90b51ba3a6adc6fafc330c23b8f764)

16 months agoinclude: kernel-build: pass pkg-config overrides to kernel build
Jo-Philipp Wich [Fri, 30 Aug 2019 13:24:45 +0000 (15:24 +0200)]
include: kernel-build: pass pkg-config overrides to kernel build

Pass suitable pkg-config overrides to the kernel build process in
order to let our pkg-config wrapper discover libraries provided
by tools/.

This mainly affects the use of libelf which is required for the
CONFIG_STACK_VALIDATION features. So far, the build system either
silently used host system libraries or kbuild simply disabled the
feature due to the lack of a suitable libelf.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit fe43969336201f2cc7d103b68fd6e65989bee184)

16 months agotools: libelf: fix headers to trigger -Wundef warnings
Jo-Philipp Wich [Fri, 30 Aug 2019 13:22:01 +0000 (15:22 +0200)]
tools: libelf: fix headers to trigger -Wundef warnings

When libelf from tools/ is used for building the kernel, compilation
aborts due to access to undefined defines since Kbuild adds -Wundef
to the compiler flags.

Patch the header files to use `#if defined(...)` instead of `#if ...`
to prevent such issues.

Ref: https://github.com/NixOS/nixpkgs/issues/59929
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit f3ab336d7ceda929dc8dc4a8b09a9552dc6be0b1)

16 months agotools: libelf: install pkg-config file
Jo-Philipp Wich [Fri, 30 Aug 2019 13:28:27 +0000 (15:28 +0200)]
tools: libelf: install pkg-config file

Install the pkg-config definition for libelf in order to allow the
kernel build process discover it later on.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit d3f86c9cc3e465fbca51aaadbb274856831ba56c)

16 months agoscripts/feeds: fix 'src-include' directive
Bjørn Mork [Mon, 2 Sep 2019 11:49:21 +0000 (13:49 +0200)]
scripts/feeds: fix 'src-include' directive

Commit 775b70f8d5df renamed parse_file() parameters without
updating the recursive call. This broke parsing of any feeds.conf
using 'src-include'.

 $ scripts/feeds update -a
 Can't use string ("defaults") as a HASH ref while "strict refs" in use at scripts/feeds line 63, <$fh> line 1.

Fixes: 775b70f8d5df ("scripts/feeds: allow adding parameters to feeds")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
(cherry picked from commit a21b70be31a9d8adda0ae65cc38d1b3b4b6680d4)

16 months agouci: update to latest Git HEAD
Hauke Mehrtens [Sun, 1 Sep 2019 17:52:41 +0000 (19:52 +0200)]
uci: update to latest Git HEAD

415f9e4 uci/file: replace mktemp() with mkstemp()

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 6aa962a62288952aec08c1f67fb0735f420f720e)

16 months agoiwinfo: update to latest Git HEAD
Hauke Mehrtens [Sun, 1 Sep 2019 17:47:50 +0000 (19:47 +0200)]
iwinfo: update to latest Git HEAD

f599a8d iwinfo: Fix rate buffer size
71ec9be iwinfo: Fix buffer size
f8ef450 iwinfo: Add support for WPA3

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 6658447534152b72a3341b369f1eb545618fa7cf)

16 months agoFix handling of BUILD_SUFFIX in remote-gdb script
Thomas Langer [Thu, 22 Aug 2019 12:21:14 +0000 (12:21 +0000)]
Fix handling of BUILD_SUFFIX in remote-gdb script

When CONFIG_BUILD_SUFFIX is enabled, the target-* folders in build_dir
and staging_dir have this suffix in the name, but not the
toolchain directories. When detecting the names for "arch" and "libc",
also accept the suffix and do not use it for the toolchain path.

Signed-off-by: Thomas Langer <thomas.langer@intel.com>
(cherry picked from commit 035906fd05b2e5543cedd9471731043945fdcf13)

16 months agotools/cmake: Update to 3.15.1
Daniel Engberg [Sat, 16 Mar 2019 21:09:22 +0000 (21:09 +0000)]
tools/cmake: Update to 3.15.1

Update CMake to 3.15.1
Refresh patches
Remove inofficial fossies.org and replace with GitHub (link on official site)
Remove 150-C-feature-checks-Match-warnings-more-strictly.patch as it's
a no longer needed backport from upstream.
Disable ccache if GCC is 4.8, 4.9 or 5.X to avoid build failures.
Reference: https://github.com/openwrt/openwrt/pull/1929

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit 413c68d120043cd8ff1f4aa057d33c140bfc6bfa)

16 months agonftables: bump to version 0.9.2
Konstantin Demin [Wed, 21 Aug 2019 06:25:06 +0000 (09:25 +0300)]
nftables: bump to version 0.9.2

- exclude Python-related stuff from build
- drop patches:
  * 010-uclibc-ng.patch, applied upstream

ipkg size decrease by 2.8%:
old:
194.851 nftables_0.9.0-2_arm_cortex-a7_neon-vfpv4.ipk
new:
189.581 nftables_0.9.2-1_arm_cortex-a7_neon-vfpv4.ipk

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
(cherry picked from commit b74f1f335a792a15feb0fd839a69486050d3531f)