openwrt/openwrt.git
8 years agoCorrect libc path
Hamish Guthrie [Fri, 13 May 2011 11:52:40 +0000 (11:52 +0000)]
Correct libc path

SVN-Revision: 26885

8 years agoAdd new defconfig and profile for es variant
Hamish Guthrie [Fri, 13 May 2011 11:49:52 +0000 (11:49 +0000)]
Add new defconfig and profile for es variant

SVN-Revision: 26884

8 years agoSquash uids
Hamish Guthrie [Fri, 13 May 2011 10:36:39 +0000 (10:36 +0000)]
Squash uids

SVN-Revision: 26883

8 years agoRemoved Alix.mk profile which was accidently left as an empty file applying the patch...
Daniel Dickinson [Fri, 13 May 2011 07:23:11 +0000 (07:23 +0000)]
Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880.

SVN-Revision: 26882

8 years agoAdd missed files from previous commit: This patch provides an image suitable for...
Daniel Dickinson [Fri, 13 May 2011 06:08:49 +0000 (06:08 +0000)]
Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.

Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26880

8 years agoThis patch provides an image suitable for the alix2*, alix3, and alix6 headless ...
Daniel Dickinson [Fri, 13 May 2011 06:06:42 +0000 (06:06 +0000)]
This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.

Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26879

8 years agobcm63xx: Add support for the T-Home Speedport W 303V
Florian Fainelli [Wed, 11 May 2011 13:34:14 +0000 (13:34 +0000)]
bcm63xx: Add support for the T-Home Speedport W 303V

Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26878

8 years agobcm63xx: Add firmware helpers for T-Home Speedport W 303V
Florian Fainelli [Wed, 11 May 2011 13:34:05 +0000 (13:34 +0000)]
bcm63xx: Add firmware helpers for T-Home Speedport W 303V

Add two helpers for generating correctly tagged images for the T-Home
Speedport W 303V Typ B as well as xor'd ones as required by CFE.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26877

8 years agobcm63xx: Update support for the DSL-274xB revision C
Florian Fainelli [Wed, 11 May 2011 13:33:50 +0000 (13:33 +0000)]
bcm63xx: Update support for the DSL-274xB revision C

Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.

While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26876

8 years agobcm63xx: Accept any led with power in its name as power led
Florian Fainelli [Wed, 11 May 2011 13:33:45 +0000 (13:33 +0000)]
bcm63xx: Accept any led with power in its name as power led

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26875

8 years agobcm63xx: Decouple Board ID and image name for fixup
Florian Fainelli [Wed, 11 May 2011 13:33:41 +0000 (13:33 +0000)]
bcm63xx: Decouple Board ID and image name for fixup

Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26874

8 years agoswitch to 2.6.38
Florian Fainelli [Wed, 11 May 2011 13:33:34 +0000 (13:33 +0000)]
switch to 2.6.38

SVN-Revision: 26873

8 years agoadd missing 2.6.38 touchscreen config symbols
Florian Fainelli [Wed, 11 May 2011 13:33:30 +0000 (13:33 +0000)]
add missing 2.6.38 touchscreen config symbols

SVN-Revision: 26872

8 years agopackage/kernel/modules/other.mk is getting big enough that putting the LEDs stuff...
John Crispin [Mon, 9 May 2011 20:28:04 +0000 (20:28 +0000)]
package/kernel/modules/other.mk is getting big enough that putting the LEDs stuff into its own file makes sense.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26868

8 years ago(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
John Crispin [Mon, 9 May 2011 15:21:58 +0000 (15:21 +0000)]
(respin) 802.1Q VLAN support for ADM6996M/ADM6996FC

This patch adds 802.1Q VLAN support for the ADM6996M chip.

The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.

The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].

Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt

Signed-of-By: Peter Lebbing <peter@digitalbrains.com>
SVN-Revision: 26865

8 years agoar71xx: populate LED3 on the JA76PF board
Gabor Juhos [Sun, 8 May 2011 21:38:51 +0000 (21:38 +0000)]
ar71xx: populate LED3 on the JA76PF board

Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
SVN-Revision: 26862

8 years agoar71xx: add uci config for the WLAN LED on the WRT160NL
Gabor Juhos [Sun, 8 May 2011 21:38:49 +0000 (21:38 +0000)]
ar71xx: add uci config for the WLAN LED on the WRT160NL

Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

SVN-Revision: 26861

8 years agoar71xx: use phy0tpt trigger for the WLAN LEDs
Gabor Juhos [Sun, 8 May 2011 21:38:48 +0000 (21:38 +0000)]
ar71xx: use phy0tpt trigger for the WLAN LEDs

SVN-Revision: 26860

8 years agoar71xx: remove superfluous fifo_cfg overrides
Gabor Juhos [Sun, 8 May 2011 21:38:46 +0000 (21:38 +0000)]
ar71xx: remove superfluous fifo_cfg overrides

SVN-Revision: 26859

8 years agoipv6: restore correct ECN handling on TCP xmit Thanks Dave Taht
Travis Kemen [Sun, 8 May 2011 17:08:06 +0000 (17:08 +0000)]
ipv6: restore correct ECN handling on TCP xmit Thanks Dave Taht

SVN-Revision: 26858

8 years agoDeployment of IPv6 has opened up many more prefixes than just the 2000::/3 space...
Travis Kemen [Sun, 8 May 2011 17:03:07 +0000 (17:03 +0000)]
Deployment of IPv6 has opened up many more prefixes than just the 2000::/3 space, so a default route of ::/0 is more correct. Thanks Dave Taht

SVN-Revision: 26857

8 years agoar71xx: ag71xx: make switch register access atomic
Gabor Juhos [Sun, 8 May 2011 16:32:53 +0000 (16:32 +0000)]
ar71xx: ag71xx: make switch register access atomic

Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

SVN-Revision: 26856

8 years agoar71xx: ag71xx: fix section mismatch warnings
Gabor Juhos [Sun, 8 May 2011 13:30:36 +0000 (13:30 +0000)]
ar71xx: ag71xx: fix section mismatch warnings

The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

SVN-Revision: 26855

8 years agoar71xx: ag71xx: fix build error if debugfs is enabled
Gabor Juhos [Sun, 8 May 2011 13:30:26 +0000 (13:30 +0000)]
ar71xx: ag71xx: fix build error if debugfs is enabled

SVN-Revision: 26854

8 years agobase-files: retrigger usb coldplug after module loading, solves usb_modeswitch on...
Jo-Philipp Wich [Sun, 8 May 2011 10:25:58 +0000 (10:25 +0000)]
base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352)

SVN-Revision: 26848

8 years agobrcm47xx: update patches
Hauke Mehrtens [Sat, 7 May 2011 12:49:17 +0000 (12:49 +0000)]
brcm47xx: update patches

SVN-Revision: 26846

8 years agoar71xx: ag71xx: add debugfs entry for [rt]x_ring
Gabor Juhos [Sat, 7 May 2011 12:40:34 +0000 (12:40 +0000)]
ar71xx: ag71xx: add debugfs entry for [rt]x_ring

SVN-Revision: 26845

8 years agoar71xx: ag71xx: add timestamps to ag71xx_buf
Gabor Juhos [Sat, 7 May 2011 12:40:28 +0000 (12:40 +0000)]
ar71xx: ag71xx: add timestamps to ag71xx_buf

SVN-Revision: 26844

8 years agoar71xx: ag71xx: use dynamically allocated buffer for napi_stats
Gabor Juhos [Sat, 7 May 2011 12:40:26 +0000 (12:40 +0000)]
ar71xx: ag71xx: use dynamically allocated buffer for napi_stats

SVN-Revision: 26843

8 years agoar71xx: ag71xx: use debugfs_remove_recursive
Gabor Juhos [Sat, 7 May 2011 12:40:25 +0000 (12:40 +0000)]
ar71xx: ag71xx: use debugfs_remove_recursive

SVN-Revision: 26842

8 years agobase-files: fix a typo in etc/banner
Gabor Juhos [Sat, 7 May 2011 09:23:33 +0000 (09:23 +0000)]
base-files: fix a typo in etc/banner

SVN-Revision: 26841

8 years agoar71xx: override wmac device name for the AR934x SoCs
Gabor Juhos [Sat, 7 May 2011 09:23:32 +0000 (09:23 +0000)]
ar71xx: override wmac device name for the AR934x SoCs

SVN-Revision: 26840

8 years agoremove useless patches
Florian Fainelli [Fri, 6 May 2011 12:37:40 +0000 (12:37 +0000)]
remove useless patches

SVN-Revision: 26837

8 years agofill maintainer infos for a couple of targets
Florian Fainelli [Fri, 6 May 2011 12:37:36 +0000 (12:37 +0000)]
fill maintainer infos for a couple of targets

SVN-Revision: 26836

8 years agoupdate to 2.6.38.2
Florian Fainelli [Thu, 5 May 2011 16:35:44 +0000 (16:35 +0000)]
update to 2.6.38.2

SVN-Revision: 26833

8 years agoadd missing 2.6.38 symbols
Florian Fainelli [Thu, 5 May 2011 16:35:40 +0000 (16:35 +0000)]
add missing 2.6.38 symbols

SVN-Revision: 26832

8 years agobrcm47xx: when detecting a ssb pci device without an own sprom write the sprom data...
Hauke Mehrtens [Thu, 5 May 2011 14:05:21 +0000 (14:05 +0000)]
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.

SVN-Revision: 26829

8 years agobrcm47xx: fix typo in patch
Hauke Mehrtens [Thu, 5 May 2011 13:18:35 +0000 (13:18 +0000)]
brcm47xx: fix typo in patch

SVN-Revision: 26828

8 years agolinux/ar71xx: add some missing symbols for nand/yaffs targets
Alexandros C. Couloumbis [Thu, 5 May 2011 07:19:46 +0000 (07:19 +0000)]
linux/ar71xx: add some missing symbols for nand/yaffs targets

SVN-Revision: 26827

8 years agolua: remove posix from Lua core, almost nothing uses it - saves 9k compressed
Jo-Philipp Wich [Wed, 4 May 2011 14:51:06 +0000 (14:51 +0000)]
lua: remove posix from Lua core, almost nothing uses it - saves 9k compressed

SVN-Revision: 26822

8 years agoath9k: add noise floor calibration fix that should improve stability
Felix Fietkau [Wed, 4 May 2011 14:35:35 +0000 (14:35 +0000)]
ath9k: add noise floor calibration fix that should improve stability

SVN-Revision: 26819

8 years agolinux/generic: port yaffs to 2.6.39
Alexandros C. Couloumbis [Wed, 4 May 2011 09:35:06 +0000 (09:35 +0000)]
linux/generic: port yaffs to 2.6.39

SVN-Revision: 26818

8 years agolinux/rb532: use kernel and initramfs tags on image generation
Alexandros C. Couloumbis [Wed, 4 May 2011 08:47:00 +0000 (08:47 +0000)]
linux/rb532: use kernel and initramfs tags on image generation

SVN-Revision: 26817

8 years agocomgt: add tty hotplug remove handling, only iterate each tty once (#9211)
Jo-Philipp Wich [Wed, 4 May 2011 08:19:07 +0000 (08:19 +0000)]
comgt: add tty hotplug remove handling, only iterate each tty once (#9211)

SVN-Revision: 26816

8 years agokernel: revert r26814
Jo-Philipp Wich [Tue, 3 May 2011 21:25:36 +0000 (21:25 +0000)]
kernel: revert r26814

SVN-Revision: 26815

8 years agokernel: add kmod-crypto-ipsec kmod-crypto-ipsec bundles some otherwise unprovided...
Jo-Philipp Wich [Tue, 3 May 2011 21:22:43 +0000 (21:22 +0000)]
kernel: add kmod-crypto-ipsec kmod-crypto-ipsec bundles some otherwise unprovided kernel crypto modules that are useful for IPSEC. This is an alternative to breaking these modules out into kmod-crypto-wq (crypto_wq.ko), kmod-crypto-rng (rng.ko and krng.ko), and kmod-crypto-iv (eseqiv.ko and chainiv.ko).

Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26814

8 years agokernel: add kmod-crypto-{wq,rng,iv} Add kmod-crypto-iv as a dependency for kmod-ipsec...
Jo-Philipp Wich [Tue, 3 May 2011 21:21:05 +0000 (21:21 +0000)]
kernel: add kmod-crypto-{wq,rng,iv} Add kmod-crypto-iv as a dependency for kmod-ipsec. Also remove the extraneous kmod-crypto-core dependency to eliminate recursion.

Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26813

8 years agokernel: add kmod-crypto-{wq,rng,iv} This patch adds kmod-crypto-wq, kmod-crypto-rng...
Jo-Philipp Wich [Tue, 3 May 2011 21:19:56 +0000 (21:19 +0000)]
kernel: add kmod-crypto-{wq,rng,iv} This patch adds kmod-crypto-wq, kmod-crypto-rng, and kmod-crypto-iv packages. These packages provide some missing kernel crypto modules which are required for IPSEC. The strongswan4, ipsec-tools, and possibly other IPSEC packages do not work properly without these modules.

NOTE: The KCONFIG associated with each of these modules gets selected
whenever CRYPTO_MANAGER (kmod-crypto-manager) is selected so these
modules are already being built.

Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26812

8 years agogeos: remove unneeded modules The via-sata and gpio-nsc modules are both unneeded...
Jo-Philipp Wich [Tue, 3 May 2011 21:18:12 +0000 (21:18 +0000)]
geos: remove unneeded modules The via-sata and gpio-nsc modules are both unneeded on the Geos platform.

SVN-Revision: 26811

8 years agocomgt: move ifup invocation back into background subshell to prevent hotplug deadlocks
Jo-Philipp Wich [Tue, 3 May 2011 19:45:55 +0000 (19:45 +0000)]
comgt: move ifup invocation back into background subshell to prevent hotplug deadlocks

SVN-Revision: 26810

8 years agocomgt: move 3g hotplug handling to tty subsystem, fixes race on coldplug (#9211)
Jo-Philipp Wich [Tue, 3 May 2011 19:39:13 +0000 (19:39 +0000)]
comgt: move 3g hotplug handling to tty subsystem, fixes race on coldplug (#9211)

SVN-Revision: 26809

8 years agobase-files: cleanup permissions of device files in common hotplug rules (#9211)
Jo-Philipp Wich [Tue, 3 May 2011 19:37:59 +0000 (19:37 +0000)]
base-files: cleanup permissions of device files in common hotplug rules (#9211)

SVN-Revision: 26808

8 years agohotplug2: introduce tty subsystem events (#9211)
Jo-Philipp Wich [Tue, 3 May 2011 19:35:58 +0000 (19:35 +0000)]
hotplug2: introduce tty subsystem events (#9211)

SVN-Revision: 26807

8 years agofirewall: revert accidential committed changes from r26805
Jo-Philipp Wich [Mon, 2 May 2011 12:55:36 +0000 (12:55 +0000)]
firewall: revert accidential committed changes from r26805

SVN-Revision: 26806

8 years agofirewall: provide examples of ssh port relocation on firewall and IPsec passthrough...
Jo-Philipp Wich [Mon, 2 May 2011 12:54:31 +0000 (12:54 +0000)]
firewall: provide examples of ssh port relocation on firewall and IPsec passthrough Two examples of potentially useful configurations (commented out, of course):

(a) map the ssh service running on the firewall to 22001 externally, without modifying the configuration of the daemon itself. this allows port 22 on the WAN side to then be port-forwarded to a
LAN-based machine if desired, or if not, simply obscures the port from external attack.

(b) allow IPsec/ESP and ISAKMP (UDP-based key exchange) to happen by default. useful for most modern VPN clients you might have on your WAN.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26805

8 years agoquilt: fix building with dash `test x == x` gives a syntax error with dash (standard...
Jo-Philipp Wich [Mon, 2 May 2011 12:53:32 +0000 (12:53 +0000)]
quilt: fix building with dash `test x == x` gives a syntax error with dash (standard in Debian). The modified patch reflects the current upstream: git.savannah.gnu.org/cgit/quilt.git/commit/?id=38df0b210c3df67f3e784af92232ae1946b98ecd

SVN-Revision: 26804

8 years agoupdate to 2.6.38
Florian Fainelli [Mon, 2 May 2011 07:57:25 +0000 (07:57 +0000)]
update to 2.6.38

SVN-Revision: 26803

8 years agocns3xxx: remove one of the dma cache patches, it causes a regression in the ethernet...
Felix Fietkau [Mon, 2 May 2011 00:28:30 +0000 (00:28 +0000)]
cns3xxx: remove one of the dma cache patches, it causes a regression in the ethernet driver

SVN-Revision: 26802

8 years agobrcm47xx: add fallback sprom for pci devices without an own sprom.
Hauke Mehrtens [Sun, 1 May 2011 20:28:35 +0000 (20:28 +0000)]
brcm47xx: add fallback sprom for pci devices without an own sprom.

If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.

This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)

SVN-Revision: 26801

8 years agoath9k: add a new fix for signal strength / noise measurements
Felix Fietkau [Sun, 1 May 2011 18:23:12 +0000 (18:23 +0000)]
ath9k: add a new fix for signal strength / noise measurements

SVN-Revision: 26798

8 years agocns3xxx: fix missing and incomplete cache flushes on DMA cache sync for cpu - fixes...
Felix Fietkau [Sun, 1 May 2011 15:53:56 +0000 (15:53 +0000)]
cns3xxx: fix missing and incomplete cache flushes on DMA cache sync for cpu - fixes some issues with ath9k

SVN-Revision: 26797

8 years agomac80211: detect and drop incoming packets with invalid CCMP packet numbers to fix...
Felix Fietkau [Sun, 1 May 2011 01:45:26 +0000 (01:45 +0000)]
mac80211: detect and drop incoming packets with invalid CCMP packet numbers to fix connection hangs on some devices

SVN-Revision: 26795

8 years agoadd vim temp files (*~) to .gitignore
Jo-Philipp Wich [Fri, 29 Apr 2011 15:11:57 +0000 (15:11 +0000)]
add vim temp files (*~) to .gitignore

SVN-Revision: 26785

8 years agoexclude pktgen for uml target
Florian Fainelli [Fri, 29 Apr 2011 12:04:17 +0000 (12:04 +0000)]
exclude pktgen for uml target

SVN-Revision: 26781

8 years agoar71xx: use the ar8316 switch driver on the PB92 board and add a matching default...
Felix Fietkau [Thu, 28 Apr 2011 21:27:42 +0000 (21:27 +0000)]
ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config

SVN-Revision: 26779

8 years agoar8316: automatically detect whether port4 is used as PHY or as a switch port
Felix Fietkau [Thu, 28 Apr 2011 21:27:37 +0000 (21:27 +0000)]
ar8316: automatically detect whether port4 is used as PHY or as a switch port

SVN-Revision: 26778

8 years agoar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu)
Felix Fietkau [Thu, 28 Apr 2011 19:30:49 +0000 (19:30 +0000)]
ar71xx: fix MDIO access on ar7242 (based on a patch by Jess Zhu)

SVN-Revision: 26777

8 years agoar8216: support AR8316 rev 0 devices
Felix Fietkau [Thu, 28 Apr 2011 19:30:43 +0000 (19:30 +0000)]
ar8216: support AR8316 rev 0 devices

SVN-Revision: 26776

8 years agorelayd: map "ipaddr" option to local ip (-L)
Jo-Philipp Wich [Wed, 27 Apr 2011 19:16:35 +0000 (19:16 +0000)]
relayd: map "ipaddr" option to local ip (-L)

SVN-Revision: 26773

8 years agolinux/atheros: add 2.6.38 preliminary support
Alexandros C. Couloumbis [Wed, 27 Apr 2011 17:18:03 +0000 (17:18 +0000)]
linux/atheros: add 2.6.38 preliminary support

SVN-Revision: 26772

8 years agomadwifi: Fix compilation for 2.6.39
Felix Fietkau [Tue, 26 Apr 2011 23:05:34 +0000 (23:05 +0000)]
madwifi: Fix compilation for 2.6.39

Fix compilation for 2.6.39 by replacing SPIN_LOCK_UNLOCKED with
DEFINE_SPINLOCK().

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26771

8 years agoswconfig: Replace SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK
Felix Fietkau [Tue, 26 Apr 2011 23:05:29 +0000 (23:05 +0000)]
swconfig: Replace SPIN_LOCK_UNLOCKED with DEFINE_SPINLOCK

SPIN_LOCK_UNLOCKED has been deprecated since 2.6.19 and will get removed
in 2.6.39, so replace it with DEFINE_SPINLOCK().

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26770

8 years agomac80211: backport some more compat fixes, fix compile issues on 2.6.31 and earlier
Felix Fietkau [Tue, 26 Apr 2011 22:23:52 +0000 (22:23 +0000)]
mac80211: backport some more compat fixes, fix compile issues on 2.6.31 and earlier

SVN-Revision: 26768

8 years agomac80211: broadcast the country IE by default if the country code is configured ...
Felix Fietkau [Tue, 26 Apr 2011 19:33:27 +0000 (19:33 +0000)]
mac80211: broadcast the country IE by default if the country code is configured (#9308)

SVN-Revision: 26765

8 years agowpa_supplicant: make sure that the common 802.11 code gets linked in (fixes #9299)
Felix Fietkau [Tue, 26 Apr 2011 19:16:25 +0000 (19:16 +0000)]
wpa_supplicant: make sure that the common 802.11 code gets linked in (fixes #9299)

SVN-Revision: 26764

8 years agomac80211: replace the regd revert patch with a proper fix, add some more pending...
Felix Fietkau [Tue, 26 Apr 2011 01:23:23 +0000 (01:23 +0000)]
mac80211: replace the regd revert patch with a proper fix, add some more pending patches

SVN-Revision: 26761

8 years agoath9k: remove the signal strength fix, it causes a lot of confusion and seems to...
Felix Fietkau [Mon, 25 Apr 2011 18:21:32 +0000 (18:21 +0000)]
ath9k: remove the signal strength fix, it causes a lot of confusion and seems to be just as inaccurate as the original version of the code

SVN-Revision: 26753

8 years agocfg80211: revert upstream regdomain handling breakage
Felix Fietkau [Mon, 25 Apr 2011 18:21:28 +0000 (18:21 +0000)]
cfg80211: revert upstream regdomain handling breakage

SVN-Revision: 26752

8 years agohostapd: fix a few compile errors and warnings
Felix Fietkau [Sun, 24 Apr 2011 03:34:46 +0000 (03:34 +0000)]
hostapd: fix a few compile errors and warnings

SVN-Revision: 26751

8 years agomac80211: do rate control updates when the HT configuration changes on an interface
Felix Fietkau [Sat, 23 Apr 2011 21:34:40 +0000 (21:34 +0000)]
mac80211: do rate control updates when the HT configuration changes on an interface

SVN-Revision: 26750

8 years agohostapd: update to 2011-04-21
Felix Fietkau [Sat, 23 Apr 2011 21:34:35 +0000 (21:34 +0000)]
hostapd: update to 2011-04-21

SVN-Revision: 26749

8 years agolinux/adm5120: update wget2nand script
Alexandros C. Couloumbis [Thu, 21 Apr 2011 13:18:33 +0000 (13:18 +0000)]
linux/adm5120: update wget2nand script

SVN-Revision: 26748

8 years agolinux/ar71xx: update wget2nand script
Alexandros C. Couloumbis [Thu, 21 Apr 2011 12:38:25 +0000 (12:38 +0000)]
linux/ar71xx: update wget2nand script

SVN-Revision: 26747

8 years agolinux/ar71xx: add 2.6.38 preliminary support
Alexandros C. Couloumbis [Thu, 21 Apr 2011 11:45:23 +0000 (11:45 +0000)]
linux/ar71xx: add 2.6.38 preliminary support

SVN-Revision: 26746

8 years agomac80211: remove unneeded patch
Hauke Mehrtens [Thu, 21 Apr 2011 09:32:49 +0000 (09:32 +0000)]
mac80211: remove unneeded patch

This was fixed upstream

SVN-Revision: 26745

8 years agomac80211: update to wireless-testing 2011-04-19, contains several beacon related...
Felix Fietkau [Wed, 20 Apr 2011 18:14:35 +0000 (18:14 +0000)]
mac80211: update to wireless-testing 2011-04-19, contains several beacon related fixes for ath9k

SVN-Revision: 26744

8 years agoppp: extend the r26742 change to ip-down too
Jo-Philipp Wich [Wed, 20 Apr 2011 12:08:12 +0000 (12:08 +0000)]
ppp: extend the r26742 change to ip-down too

SVN-Revision: 26743

8 years agoppp: prevent duplicate hotplug for non uci managed ppp interfaces (#9275)
Jo-Philipp Wich [Wed, 20 Apr 2011 12:02:04 +0000 (12:02 +0000)]
ppp: prevent duplicate hotplug for non uci managed ppp interfaces (#9275)

SVN-Revision: 26742

8 years agofirewall: prevent excessive uci state data aggregation (#9152)
Jo-Philipp Wich [Wed, 20 Apr 2011 11:49:09 +0000 (11:49 +0000)]
firewall: prevent excessive uci state data aggregation (#9152)

SVN-Revision: 26740

8 years agobusybox: refresh patches
Felix Fietkau [Wed, 20 Apr 2011 02:56:23 +0000 (02:56 +0000)]
busybox: refresh patches

SVN-Revision: 26738

8 years agobusybox: fix issues with static routes and 6rd option parsing (thx, Florian Fuessl)
Felix Fietkau [Wed, 20 Apr 2011 02:56:17 +0000 (02:56 +0000)]
busybox: fix issues with static routes and 6rd option parsing (thx, Florian Fuessl)

SVN-Revision: 26737

8 years agomac80211: b43: Expose N-PHY support
Hauke Mehrtens [Tue, 19 Apr 2011 21:44:29 +0000 (21:44 +0000)]
mac80211: b43: Expose N-PHY support

Allow enabling of N-PHY support for BCM4321 and BCM4322.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26736

8 years agomac80211: b43: Expose PIO mode fallback
Hauke Mehrtens [Tue, 19 Apr 2011 21:43:19 +0000 (21:43 +0000)]
mac80211: b43: Expose PIO mode fallback

Allow reenabling the PIO mode fallback for b43.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26735

8 years agomac80211: b43: Expose debug option
Hauke Mehrtens [Tue, 19 Apr 2011 21:40:29 +0000 (21:40 +0000)]
mac80211: b43: Expose debug option

Allow enabling debug output and debugfs for B43.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26734

8 years agomac80211: b43: Add Firmware 5.10.56.27
Hauke Mehrtens [Tue, 19 Apr 2011 21:40:08 +0000 (21:40 +0000)]
mac80211: b43: Add Firmware 5.10.56.27

Add the 5.10.56.27 firmware option. This includes updating b43-fwcutter to
its newest release 14 and updating the b43-fwsquash.py to recognise rev 16
n phy files.

Also rename the current options from STABLE/EXPERIMENTAL to their version
numbers.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26733

8 years agohostapd: fix bridge handling for wds stations (#9257)
Felix Fietkau [Tue, 19 Apr 2011 15:41:49 +0000 (15:41 +0000)]
hostapd: fix bridge handling for wds stations (#9257)

SVN-Revision: 26724

8 years agomac80211: re-enable beacon channel hints
Felix Fietkau [Tue, 19 Apr 2011 15:41:45 +0000 (15:41 +0000)]
mac80211: re-enable beacon channel hints

SVN-Revision: 26723

8 years agobase-files: fix stale space in eglibc library install section (#9270)
Jo-Philipp Wich [Tue, 19 Apr 2011 13:18:39 +0000 (13:18 +0000)]
base-files: fix stale space in eglibc library install section (#9270)

SVN-Revision: 26720

8 years agolibrpc: update to a newer version to fix issues with __set_errno
Felix Fietkau [Mon, 18 Apr 2011 09:42:46 +0000 (09:42 +0000)]
librpc: update to a newer version to fix issues with __set_errno

SVN-Revision: 26716

8 years agouml: fix the kernel config name override
Felix Fietkau [Sun, 17 Apr 2011 21:47:49 +0000 (21:47 +0000)]
uml: fix the kernel config name override

SVN-Revision: 26715