openwrt/openwrt.git
3 months agoar71xx: ubnt-(xm,xw): fix LED RSSI indication
Lech Perczak [Tue, 11 Sep 2018 21:50:56 +0000 (23:50 +0200)]
ar71xx: ubnt-(xm,xw): fix LED RSSI indication

When mapping for RSSI LEDs was defined for interface wlan0 on
Ubiquiti XM and XW family, it missed connection to actual interface.
Therefore create the mapping to interface, so RSSI LEDs work without
additional configuration, after starting rssileds service.

Also add the required package for this.

While at that, remove coefficients needed for PWM LEDs, as XM and XW
boards do not support PWM LEDs.

Tested-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
[Squashed commits + remove custom device_packages + slighty rewrite the commit msg]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agoar71xx: fix RB941-2nD detection
Julien Rabier [Mon, 4 Feb 2019 20:03:35 +0000 (21:03 +0100)]
ar71xx: fix RB941-2nD detection

Some hAP lite routers aren't detected because
/proc/cpuinfo shows "RouterBOARD RB941-2nD"
instead of "RouterBOARD 941-2nD".

Fix that.

Signed-off-by: Julien Rabier <taziden@flexiden.org>
[Alter string to include all flavours + slight rewrite of commit msg]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agoar71xx: fix Arduino Yun enabling of level shifters outputs
Edoardo Scaglia [Fri, 1 Feb 2019 15:43:46 +0000 (16:43 +0100)]
ar71xx: fix Arduino Yun enabling of level shifters outputs

As show in Arduino Yun schematic [1] GPIO 21 and 22 are connected to
output enable pin (OE) of two NTB01xx level shifters.

NTB01xx datasheets [2] [3] states that OE pin are active-high
therefore we should initialize GPIO 21 (DS_GPIO_OE) and GPIO 22
(DS_GPIO_OE2) accordingly to actually enable level shifters outputs.

[1] https://www.arduino.cc/en/uploads/Main/arduino-Yun-schematic.pdf
[2] https://www.nxp.com/docs/en/data-sheet/NTB0102.pdf
[3] https://www.nxp.com/docs/en/data-sheet/NTB0104.pdf

Signed-off-by: Edoardo Scaglia <edoardo.87@gmail.com>
3 months agokernel: add missing symbols to 4.19
Petr Štetiar [Thu, 3 Jan 2019 19:20:19 +0000 (20:20 +0100)]
kernel: add missing symbols to 4.19

While preparing 4.19 for imx6 and test building it with
CONFIG_ALL_KMODS=y with verbose mode enabled, I was asked by kernel
config about few missing symbols/modules

Let's add them to the generic config.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
[slight rewrite of commit log]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 4.19 to 4.19.20
Koen Vandeputte [Thu, 7 Feb 2019 10:34:28 +0000 (11:34 +0100)]
kernel: bump 4.19 to 4.19.20

Refreshed all patches.

Remove upstreamed:
- 100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch

Altered patches:
- 721-phy_packets.patch

Compile-tested on: imx6
Runtime-tested on: imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 4.14 to 4.14.98
Koen Vandeputte [Thu, 7 Feb 2019 10:10:31 +0000 (11:10 +0100)]
kernel: bump 4.14 to 4.14.98

Refreshed all patches.

Remove upstreamed:
- 100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch

Altered patches:
- 721-phy_packets.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 4.9 to 4.9.155
Koen Vandeputte [Thu, 7 Feb 2019 10:32:51 +0000 (11:32 +0100)]
kernel: bump 4.9 to 4.9.155

Refreshed all patches.

Remove upstreamed:
- 100-arm-cns3xxx-fix-writing-to-wrong-PCI-registers-after.patch

Altered patches:
- 721-phy_packets.patch

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 3.18 to 3.18.134
Koen Vandeputte [Thu, 7 Feb 2019 10:08:08 +0000 (11:08 +0100)]
kernel: bump 3.18 to 3.18.134

Refreshed all patches.

Compile-tested on: adm5120
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agomac80211: rt2x00: remove patch causing low tx power
Daniel Golle [Fri, 8 Feb 2019 03:50:47 +0000 (04:50 +0100)]
mac80211: rt2x00: remove patch causing low tx power

Remove 980-rt2x00-reduce-power-consumption-on-mt7620.patch which in
combination with the most recently added patch reportedly causes TX
power to be too weak.

"without patches rssi on receiver is ~ -23dBm with 980 about -35dBm,
with both patches drops below -40dBm. with 987 only ~-28dBm"

We may need to reconsider this once we have implemented TSSI.

Fixes: cdb58b2bfe ("mac80211: rt2x00: reduce tx power to nominal level on RT6352")
Reported-by: Tomislav Požega <pozega.tomislav@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 months agocurl: bump to 7.64.0
Deng Qingfang [Fri, 8 Feb 2019 03:07:04 +0000 (11:07 +0800)]
curl: bump to 7.64.0

Fixed CVEs:

CVE-2018-16890
CVE-2019-3822
CVE-2019-3823

For other changes in version 7.64.0 see https://curl.haxx.se/changes.html#7_64_0

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
3 months agomac80211: rt2x00: reduce tx power to nominal level on RT6352
Daniel Golle [Thu, 7 Feb 2019 23:03:40 +0000 (00:03 +0100)]
mac80211: rt2x00: reduce tx power to nominal level on RT6352

Current implementation of RT6352 support provides too high tx power
at least on iPA/eLNA devices. Reduce amplification of variable gain
amplifier by 6dB to match board target power of 17dBm.
Transmited signal strength with this patch is similar to that of
stock firmware or pandorabox firmware. Throughput measured with iperf
improves. Device tested: Xiaomi Miwifi Mini.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 months agogre: remove setting default firewall zone to wan
Florian Eckert [Thu, 11 Oct 2018 11:10:56 +0000 (13:10 +0200)]
gre: remove setting default firewall zone to wan

There are two problems with this behaviour that the zone is set to wan
if no zone config option is defined in the interface section.

* The zone for the interface is "normally" specified in the firewall
config file. So if we have defined "no" zone for this interface zone
option is set now to "wan" additonaly if we add the interface in the firewall
config section to the "lan" zone, the interface is added to lan and wan at once.

iptables-save | grep <iface>

This is not what I expect.

* If I do not want to set a zone to this interface it is not possible.

Remove the default assigment to wan if no zone option is defined.
If some one need the option it stil possible to define this option.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
3 months agoath79: ag71xx: Fix tx queue timeouts during ifup
Petr Štetiar [Thu, 3 Jan 2019 02:25:11 +0000 (03:25 +0100)]
ath79: ag71xx: Fix tx queue timeouts during ifup

On ath79 and UBNT Bullet M XW (ar9342) I was experiencing weird issues during
network setup[1] which I was able to reproduce easily with following commands:

 uci set network.lan.ipaddr='192.168.1.20'
 uci commit network
 ifup lan

Which resulted after some time in:

 ...
 WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x16c/0x280
 NETDEV WATCHDOG: eth0 (ag71xx): transmit queue 0 timed out
 ...

Sometimes I wasn't able to use networking anymore, sometimes it was enough to
just ifdown/ifup lan and network was backup. On ar71xx it was all working just
fine.

I've found out, that it was happening because ag71xx_poll() wasn't called, thus
the TX queue wasn't emptied. The ag71xx_poll() is being called from napi
hrtimer, which is enabled by napi_schedule() in ar71xx_interrupt(), but since
no interrupts were ever fired again after ag71xx_stop() was called, it was
always leading to tx queue timeouts:

 *** ag71xx_hard_start_xmit()
 eth0: packet injected into TX queue
 eth0: raw intr=00000001 TXPS POLL
 eth0: enable polling mode
 eth0: processing TX ring, flush=no
 eth0: disable polling mode, rx=1, tx=1,limit=32

 ( `ifup lan done here` )

 *** ag71xx_stop()
 *** ag71xx_open()
 *** ag71xx_hw_enable()
 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
 IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
 *** ag71xx_hard_start_xmit()
 eth0: packet injected into TX queue
 *** ag71xx_hard_start_xmit()
 eth0: packet injected into TX queue
 ...
 WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:320 dev_watchdog+0x164/0x274

So I've looked at ag71xx_stop() in ar71xx, added the missing bits to ath79 and
fixed this issue.

1. https://github.com/openwrt/openwrt/pull/1635#issuecomment-448638246

Signed-off-by: Petr Štetiar <ynezz@true.cz>
[move ag->link before ag71xx_hw_disable to retain ordering as original]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: rename symbol in kernel 4.19 config
Koen Vandeputte [Thu, 7 Feb 2019 12:01:35 +0000 (13:01 +0100)]
kernel: rename symbol in kernel 4.19 config

A symbol was renamed upstream starting from kernel 4.18 [1]

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v5.0-rc5&id=34b13e5e4641c0e9e0aad471a6d8dfb7999276f1

3 months agonat46: Fix mirror hash
Hauke Mehrtens [Thu, 7 Feb 2019 10:12:49 +0000 (11:12 +0100)]
nat46: Fix mirror hash

The package hash does not match the one of the package found on the
mirrors and which is generated when I do the git clone.

Fixes: 4856fa30a6c ("nat46: import for routing, add myself as maintainer")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 months agobrcm2708: fix early bootloader config restore
Stijn Tintel [Tue, 5 Feb 2019 02:34:01 +0000 (04:34 +0200)]
brcm2708: fix early bootloader config restore

Restoring the bootloader config before rebooting fails:
tar: invalid tar magic

Add the -z option to the tar command to fix this.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
3 months agobrcm2708: drop 4.9 support
Stijn Tintel [Sat, 2 Feb 2019 20:53:15 +0000 (21:53 +0100)]
brcm2708: drop 4.9 support

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
3 months agoath79: add support for TP-LINK Archer C7 v4
Oldřich Jedlička [Tue, 1 Jan 2019 22:11:49 +0000 (23:11 +0100)]
ath79: add support for TP-LINK Archer C7 v4

TP-Link Archer C7 v4 is a dual-band AC1750 router, based on the
Qualcomm/Atheros QCA9561 SoC + QCA9880.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 3T3R 5 GHz
- 5x 10/100/1000 Mbps Ethernet
- 7x LED, 2x button
- UART header on PCB

Flash instruction:
1. Upload openwrt-ath79-generic-tplink_archer-c7-v4-squashfs-factory.bin
   via Web interface

Flash instruction using TFTP recovery:
1. Set PC to fixed ip address 192.168.0.66
2. Download openwrt-ath79-generic-tplink_archer-c7-v4-squashfs-factory.bin
   and rename it to ArcherC7v4_tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
   the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.

Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
3 months agobuild: Fix missing device variables for artifacts
Petr Štetiar [Fri, 18 Jan 2019 08:25:59 +0000 (09:25 +0100)]
build: Fix missing device variables for artifacts

It was reported to me today on IRC, that building of artifacts doesn't
work properly if the concat_cmd references DEVICE_NAME variable. I've
found out, that it's due to missing call of Device/Export in artifacts
building code path, so this patch adds the missing Device/Export call
which in turn exports DEFAULT_DEVICE_VARS into the artifacts
environment.

Fixes: 493c9a35516c ("build: Introduce building of artifacts")
Tested-by: Oskari Lemmela <oskari@lemmela.net>
Reported-by: Oskari Lemmela <oskari@lemmela.net>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
3 months agoramips: drop m25p,chunked-io from dts
Chuanhong Guo [Mon, 28 Jan 2019 06:37:07 +0000 (14:37 +0800)]
ramips: drop m25p,chunked-io from dts

This option was a spi nor hack which is dropped in commit
bcf4a5f474 ("ramips: remove chunked-io patch and set spi->max_transfer_size instead")

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [edit message]
3 months agoramips: enable MT7610E 5GHz radio of MT7620a_MT7610e EVB
Deng Qingfang [Wed, 9 Jan 2019 12:54:34 +0000 (20:54 +0800)]
ramips: enable MT7610E 5GHz radio of MT7620a_MT7610e EVB

This enables MT7610E of the EVB

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
3 months agoramips: add kmod-mt76x2 to WeVo 11AC NAS
Ju Se Hoon [Tue, 8 Jan 2019 08:54:19 +0000 (17:54 +0900)]
ramips: add kmod-mt76x2 to WeVo 11AC NAS

The WeVo 11AC NAS has a MT7612E 802.11ac chip on the PCB.

Signed-off-by: Ju Se Hoon <joosahoon@gmail.com>
[renamed author from Albis-dev to real name, editted commit message]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 months agotoolchain/musl: update to version 1.1.21
Christian Lamparter [Tue, 22 Jan 2019 15:24:11 +0000 (16:24 +0100)]
toolchain/musl: update to version 1.1.21

<https://www.openwall.com/lists/musl/2019/01/21/8>
"This release makes improvements with respect to default thread stack
size, including increasing the default from 80k to 128k, increasing
the default guard size from 4k to 8k, and allowing the default to be
increased via ELF headers so that programs that need larger stacks can
be build without source-level changes, using just LDFLAGS.
Insufficient stack size for AIO threads on kernels that don't honor
the constant MINSIGSTKSZ is also fixed.

The glob core has been rewritten to fix inability to see past
searchable-but-unreadable path components, and to avoid excessive
stack usage and unnecessary syscalls. The tsearch AVL tree
implementation has also been rewritten for better size and
performance. The math library adds more native single-instruction
implementations for arm, s390x, powerpc, and x86_64.

Various bugs are fixed, including several possible deadlocks, one of
which was a new regression in 1.1.20."

detailed release notes can be found in the WHATSNEW file:
<http://git.musl-libc.org/cgit/musl/tree/WHATSNEW#n1989>

Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 months agoramips: dts: Unify naming of gpio-led nodes
Petr Štetiar [Sun, 30 Dec 2018 11:42:53 +0000 (12:42 +0100)]
ramips: dts: Unify naming of gpio-led nodes

In DTS Checklist[1] we're now demanding proper generic node names, as
the name of a node should reflect the function of the device and use
generic name for that[2]. Everybody seems to be copy&pasting from DTS
files available in the repository today, so let's unify that naming
there as well and provide proper examples.

1. https://openwrt.org/submitting-patches#dts_checklist
2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [split up]
3 months agoramips: dts: Unify naming of gpio-keys nodes
Petr Štetiar [Sun, 30 Dec 2018 11:17:25 +0000 (12:17 +0100)]
ramips: dts: Unify naming of gpio-keys nodes

In DTS Checklist[1] we're now demanding proper generic node names, as
the name of a node should reflect the function of the device and use
generic name for that[2]. Everybody seems to be copy&pasting from DTS
files available in the repository today, so let's unify that naming
there as well and provide proper examples.

1. https://openwrt.org/submitting-patches#dts_checklist
2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [split up]
3 months agoipq40xx: fix ASUS RT-AC58U switch port numbering
Christian Lamparter [Thu, 31 Jan 2019 21:29:32 +0000 (22:29 +0100)]
ipq40xx: fix ASUS RT-AC58U switch port numbering

This patch fixes the ASUS' RT-AC58U port order by
unifying the configuration with the NBG6617.

Reported-by: Roberto Socrates (rtac58u-user on the forum)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 months agoipq40xx: consolidate 02_network board defaults
Christian Lamparter [Thu, 31 Jan 2019 21:23:53 +0000 (22:23 +0100)]
ipq40xx: consolidate 02_network board defaults

This patch splits the big board case switch in 02_network in
two functions ipq40xx_setup_interfaces() and ipq40xx_setup_macs()
just like ath79 and ramips do.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 months agobrcm63xx: dts: Unify naming of gpio-led nodes
Petr Štetiar [Sun, 30 Dec 2018 11:42:53 +0000 (12:42 +0100)]
brcm63xx: dts: Unify naming of gpio-led nodes

In DTS Checklist[1] we're now demanding proper generic node names, as
the name of a node should reflect the function of the device and use
generic name for that[2]. Everybody seems to be copy&pasting from DTS
files available in the repository today, so let's unify that naming
there as well and provide proper examples.

1. https://openwrt.org/submitting-patches#dts_checklist
2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [split up]
3 months agobrcm63xx: dts: Unify naming of gpio-keys nodes
Petr Štetiar [Sun, 30 Dec 2018 11:17:25 +0000 (12:17 +0100)]
brcm63xx: dts: Unify naming of gpio-keys nodes

In DTS Checklist[1] we're now demanding proper generic node names, as
the name of a node should reflect the function of the device and use
generic name for that[2]. Everybody seems to be copy&pasting from DTS
files available in the repository today, so let's unify that naming
there as well and provide proper examples.

1. https://openwrt.org/submitting-patches#dts_checklist
2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [split up]
3 months agoglibc: update to latest 2.27 commit (BZ #24155,BZ #24097)
Hans Dedecker [Mon, 4 Feb 2019 20:24:02 +0000 (21:24 +0100)]
glibc: update to latest 2.27 commit (BZ #24155,BZ #24097)

2ebadb6451 x86-64 memcmp: Use unsigned Jcc instructions on size [BZ #24155]
3a5ae8db68 x86-64 strnlen/wcsnlen: Properly handle the length parameter [BZ #24097]
2c016ffa24 x86-64 strncpy: Properly handle the length parameter [BZ #24097]
d8457edece x86-64 strncmp family: Properly handle the length parameter [BZ #24097]
55f8812858 x86-64 memset/wmemset: Properly handle the length parameter [BZ #24097]
efc3714845 x86-64 memrchr: Properly handle the length parameter [BZ #24097]
a4690969ed x86-64 memcpy: Properly handle the length parameter [BZ #24097]
6465327195 x86-64 memcmp/wmemcmp: Properly handle the length parameter [BZ #24097]
50117e00a1 x86-64 memchr/wmemchr: Properly handle the length parameter [BZ #24097]

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
3 months agoath10k-firmware: update Candela Tech firmware images
Koen Vandeputte [Mon, 4 Feb 2019 10:48:48 +0000 (11:48 +0100)]
ath10k-firmware: update Candela Tech firmware images

*  Jan 2, 2019
Rebase patches to make 9980 bisectable.

*  Jan 2, 2019
Fix scheduling related assert when wal-peer is deleted with pending
tx buffers (bug 54, and others)

*  Jan 7, 2019:
Fix specifying retransmits for AMPDU frames.  It was previously ignored
since it is a 'software' retransmit instead of a hardware retransmit.

*  Jan 9, 2019
Fix potential way to get zero rates selected (and then assert)

*  Jan 18, 2019
pfsched has specific work-around to just return if we find invalid flags AND
if we are in an out-of-order situation.  Maybe this is last of the pfsched
related issues (bug 54 and similar).

*  Jan 24, 2019
The rcSibUpdate method can be called concurrently with IRQ tx-completion callback,
and that could potentially allow the tx-completion callback to see invalid state
and assert or otherwise mess up the rate-ctrl logic.  So, disable IRQs in
rcSibUpdate to prevent this.  Related to bug 58.

*  Jan 28, 2019
Ensure that cached config is applied to ratectrl objects when fetched from
the cache.  This should fix part of bug 58.

*  Jan 28, 2019
Ensure that ratectrl objects from cachemgr are always initialized.  This fixes
another part of bug 58.

*  Jan 30, 2019
Better use of temporary rate-ctrl object.  Make sure it is initialized, simplify
code path.  This finishes up porting forward similar changes I made for wave-1
firmware long ago, and fixes another potential way to hit bug-58 issues.

*  Jan 30, 2019
Cachemgr did not have a callback for when memory was logically freed.  This means
that peers could keep stale references to rate-ctrl objects that were in process
of being DMA'd into to load a different peer's rate-ctrl state.  This was causing
the bugcheck logic to fail early and often, and I suspect it might be a root cause
of bug 58 as well.  The fix is to add a callback and set any 'deleted' memory references
to NULL so that we cannot access it accidentally.  Thanks to excellent logs and patience
from the bug-58 reporter!

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agotoolchain/gcc: backport FORTIFY patch to 5.5.0
Hans Dedecker [Mon, 4 Feb 2019 07:48:01 +0000 (08:48 +0100)]
toolchain/gcc: backport FORTIFY patch to 5.5.0

Commit e61061a0886e2d0d6b075d75ae9b53d0a6bc9042 added support for hardening
options  in the toolchain. However this breaks the gcc5.5.0 compilation in
case FORTIFY_SOURCE is set different from FORTIFY_SOURCE_NONE as reported
in [1].
Fix this by backporting the upstream patch which fixes this in later gcc versions

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?format=multiple&id=61164

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
3 months agomt76: update to the latest version
Felix Fietkau [Sun, 3 Feb 2019 19:45:26 +0000 (20:45 +0100)]
mt76: update to the latest version

a9d4c0e mt76: mt76x2: avoid running DPD calibration if tx is blocked
4d7e13f mt76: explicitly disable energy detect cca during scan
e3c1aad mt76: run MAC work every 100ms
4e8766a mt76: clear CCA timer stats in mt76x02_edcca_init
e301f23 mt76: measure the time between mt76x02_edcca_check runs
74075ef mt76: increase ED/CCA tx block threshold

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agokernel: Fix drm dependency on drm_panel_orientation_quirks.ko for 4.19
Petr Štetiar [Thu, 3 Jan 2019 20:31:41 +0000 (21:31 +0100)]
kernel: Fix drm dependency on drm_panel_orientation_quirks.ko for 4.19

Package kmod-drm is missing dependencies for the following libraries:

 drm_panel_orientation_quirks.ko

It seems, that since Linux 4.15-rc2 drm depends on drm_panel_orientation_quirks.ko

 commit 8d70f395e6cbece665b12b4bf6dbc48d12623014
 Author: Hans de Goede <j.w.r.degoede@gmail.com>
 Date:   Sat Nov 25 20:35:49 2017 +0100

    drm: Add support for a panel-orientation connector property, v6

    On some devices the LCD panel is mounted in the casing in such a way that
    the up/top side of the panel does not match with the top side of the
    device (e.g. it is mounted upside-down).

    This commit adds the necessary infra for lcd-panel drm_connector-s to
    have a "panel orientation" property to communicate how the panel is
    orientated vs the casing.

    Userspace can use this property to check for non-normal orientation and
    then adjust the displayed image accordingly by rotating it to compensate.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
3 months agokernel: bump 4.19 to 4.19.19
Koen Vandeputte [Thu, 31 Jan 2019 15:53:27 +0000 (16:53 +0100)]
kernel: bump 4.19 to 4.19.19

Refreshed all patches.

Remove upstreamed patch:
- 800-v5.0-usb-leds-fix-regression-in-usbport-led-trigger.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 4.14 to 4.14.97
Koen Vandeputte [Thu, 31 Jan 2019 15:52:41 +0000 (16:52 +0100)]
kernel: bump 4.14 to 4.14.97

Refreshed all patches.

Adapted patches:
- 012-kbuild-add-macro-for-controlling-warnings-to-linux-c.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 4.9 to 4.9.154
Koen Vandeputte [Thu, 31 Jan 2019 14:56:42 +0000 (15:56 +0100)]
kernel: bump 4.9 to 4.9.154

Refreshed all patches.

Adapted patches:
- 012-kbuild-add-macro-for-controlling-warnings-to-linux-c.patch

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agobcm53xx: add first DTS changes queued for the Linux 5.1
Rafał Miłecki [Fri, 1 Feb 2019 06:07:32 +0000 (07:07 +0100)]
bcm53xx: add first DTS changes queued for the Linux 5.1

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
3 months agoramips: rb750gr3: License DTS as GPL-2.0-or-later OR MIT
Anton Arapov [Wed, 16 Jan 2019 07:56:08 +0000 (08:56 +0100)]
ramips: rb750gr3: License DTS as GPL-2.0-or-later OR MIT

Adding license in order to fully satisfy dts checklist:
- https://openwrt.org/submitting-patches#dts_checklist

Signed-off-by: Anton Arapov <arapov@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Acked-by: Thibaut <hacks@slashdirt.org>
Acked-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Acked-by: Chuanhong Guo <gch981213@gmail.com>
Acked-by: Andrew Yong <me@ndoo.sg>
Acked-by: Alex Maclean <monkeh@monkeh.net>
3 months agomt76: update to the latest version
Felix Fietkau [Thu, 31 Jan 2019 22:17:49 +0000 (23:17 +0100)]
mt76: update to the latest version

a4ec45c mt7603: fix LED support (copy CFLAGS from main Makefile)
edda5c5 mt76x02: use mask for vifs
dd52191 mt76x02: use commmon add interface for mt76x2u
a80acaf mt76x02: initialize mutli bss mode when set up address
38e832d mt76x02: minor beaconing init changes
171adaf mt76x02: init beacon config for mt76x2u
dcab682 mt76: beaconing fixes for USB
ff81de1 mt76x02: enable support for IBSS and MESH
8027b5d mt7603: remove copyright headers
e747e80 mt76: fix software encryption issues
2afa0d7 mt7603: remove WCID override for software encrypted frames

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agonetifd: handle hotplug event socket errors
Hans Dedecker [Thu, 31 Jan 2019 21:10:58 +0000 (22:10 +0100)]
netifd: handle hotplug event socket errors

5cd7215 system-linux: handle hotplug event socket ENOBUFS errors

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
3 months agoopenssl: update list of mirrors
Sven Roederer [Wed, 30 Jan 2019 19:17:10 +0000 (20:17 +0100)]
openssl: update list of mirrors

Host "gd.tuwien.ac.at" does not exists anymore, so we replace it by "ftp.pca.dfn.de" from the official list of mirrors.

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
3 months agouboot-omap: add 'rootwait' to the kernel cmdline
Andre Heider [Thu, 31 Jan 2019 10:12:25 +0000 (11:12 +0100)]
uboot-omap: add 'rootwait' to the kernel cmdline

Some SD cards take a while to get detected, fix booting of those.

Signed-off-by: Andre Heider <a.heider@gmail.com>
3 months agoomap: fix build without ext4 rootfs
Andre Heider [Thu, 31 Jan 2019 10:12:24 +0000 (11:12 +0100)]
omap: fix build without ext4 rootfs

Same fix as 7b76219e, just for omap.

Signed-off-by: Andre Heider <a.heider@gmail.com>
3 months agoscripts: ipkg-make-index.sh: dereference symbolic links
Jo-Philipp Wich [Thu, 31 Jan 2019 11:25:19 +0000 (12:25 +0100)]
scripts: ipkg-make-index.sh: dereference symbolic links

Use `stat -L` instead of `ls -l` to follow symbolic links when obtaining
the file size of .ipk archives.

Without this change, the size of the symlink, not the size of the target
file is encoded in the package index file.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 months agodnsmasq: latest pre-2.81 patches
Kevin Darbyshire-Bryant [Fri, 18 Jan 2019 08:56:59 +0000 (08:56 +0000)]
dnsmasq: latest pre-2.81 patches

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
3 months agoopkg: update to latest Git head
Jo-Philipp Wich [Thu, 31 Jan 2019 09:22:03 +0000 (10:22 +0100)]
opkg: update to latest Git head

d4ba162 libopkg: only perform size check when information is available

Fixes: e079591b84 ("opkg: update to latest Git head")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 months agoopkg: update to latest Git head
Jo-Philipp Wich [Thu, 31 Jan 2019 07:49:27 +0000 (08:49 +0100)]
opkg: update to latest Git head

cb66403 libopkg: check for file size mismatches

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 months agomt76: update to the latest version
Felix Fietkau [Wed, 30 Jan 2019 14:17:01 +0000 (15:17 +0100)]
mt76: update to the latest version

c3da1aa mt7603: trigger beacon stuck detection faster
7a53138 mt7603: trigger watchdog reset if flushing CAB queue fails
6eef33b mt7603: remove mt7603_txq_init
ae30c30 mt76: add driver callback for when a sta is associated
0db925f mt7603: update HT/VHT capabilities after assoc
b5ac8e4 mt7603: initialize LED callbacks only if CONFIG_MT76_LEDS is set
c989bac mt76x0: eeprom: fix chan_vs_power map in mt76x0_get_power_info
24bd2c0 mt76x0: phy: report target_power in debugfs
bc7ce2a mt76x0: init: introduce mt76x0_init_txpower routine

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agoramips: fix D-Link DIR-615 H1 switch port mapping
Mirko Parthey [Wed, 30 Jan 2019 00:24:36 +0000 (01:24 +0100)]
ramips: fix D-Link DIR-615 H1 switch port mapping

Reuse a device-specific switch port mapping which also applies to the
D-Link DIR-615 H1.

Signed-off-by: Mirko Parthey <mirko.parthey@web.de>
3 months agobase-files: config_get: prevent filename globbing
Günther Kelleter [Mon, 8 Oct 2018 13:30:00 +0000 (15:30 +0200)]
base-files: config_get: prevent filename globbing

When config_get is called as "config_get section option" the option
is unexpectedly globbed by the shell which differs from the way options
are read to a variable with "config_get variable section option".
Add another layer of double quotes to fix it.

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>
3 months agobuild: Use LINUX_DIR for Kernel/Patch
Michal Hrusecky [Thu, 11 Oct 2018 16:23:19 +0000 (18:23 +0200)]
build: Use LINUX_DIR for Kernel/Patch

Use LINUX_DIR as a path when patching kernel. Doesn't break the current usage,
but allows to create packages that will contain variation of a kernel with
kernel being build in some subdirectory of PKG_BUILD_DIR.

Signed-off-by: Michal Hrusecky <michal.hrusecky@nic.cz>
3 months agoar71xx: fix packed-not-aligned error with GCC 8.
Jo-Philipp Wich [Sat, 20 Oct 2018 10:18:03 +0000 (12:18 +0200)]
ar71xx: fix packed-not-aligned error with GCC 8.

Building ar71xx currently fails with:

    In file included from ./include/linux/ipv6.h:5,
                     from ./include/net/ipv6.h:16,
                     from ./include/net/inetpeer.h:16,
                     from ./include/net/ip_fib.h:24,
                     from ./include/net/switchdev.h:17,
                     from ./include/net/dsa.h:23,
                     from arch/mips/ath79/dev-dsa.h:15,
                     from arch/mips/ath79/dev-dsa.c:17:
    ./include/uapi/linux/ipv6.h:107:1: error: alignment 1 of 'struct ipv6_destopt_hao' is less than 2 [-Werror=packed-not-aligned]
     } __attribute__((packed));

Address this issue by correcting the alignment of the struct packing
pragma accordingly.

Fixes: FS#1805
Reported-by: Pascal Ernster <git@hardfalcon.net>
[reword subject, rewrap commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 months agobuild: fix umask detection bashism
Thorsten Glaser [Mon, 22 Oct 2018 17:28:50 +0000 (19:28 +0200)]
build: fix umask detection bashism

the leading 0 is optional and not emitted by some shells

Signed-off-by: Thorsten Glaser <tg@mirbsd.org>
3 months agobuild: fix STAGING_DIR cleaning for packages
Jeffery To [Wed, 12 Dec 2018 17:33:36 +0000 (01:33 +0800)]
build: fix STAGING_DIR cleaning for packages

This fixes two issues with cleaning package files from STAGING_DIR:

* CleanStaging currently can only remove files and not directories. This
  changes CleanStaging to use clean-package.sh, which does remove
  directories.

* Because of the way directories are ordered in the staging files list,
  clean-package.sh currently tries (and fails) to remove parent
  directories before removing subdirectories. This changes
  clean-package.sh to process the staging files list in reverse, so that
  subdirectories are removed first.

Signed-off-by: Jeffery To <jeffery.to@gmail.com>
3 months agobusybox: keep syslog.conf during sysupgrade
Val Kulkov [Thu, 20 Dec 2018 20:04:43 +0000 (15:04 -0500)]
busybox: keep syslog.conf during sysupgrade

If a user finds that logd is too barebone for their needs and wishes
to have more control over syslog, the user presently has an option
to enable CONFIG_BUSYBOX_CONFIG_FEATURE_SYSLOG and configure syslog
with settings in /etc/syslog.conf.

Presently /etc/syslog.conf silently disappears on sysupgrade. This
patch prevents such unwanted behaviour if busybox syslog is enabled
via CONFIG_BUSYBOX_CONFIG_FEATURE_SYSLOG.

Signed-off-by: Val Kulkov <val.kulkov@gmail.com>
3 months agoar71xx: use correct wan mac address for the TP-Link Archer C7 v4
David Santamaría Rogado [Fri, 18 Jan 2019 21:28:41 +0000 (22:28 +0100)]
ar71xx: use correct wan mac address for the TP-Link Archer C7 v4

The correct MAC address for this device is lan_mac +1, there is no
need to set lan_mac so use base_mac variable instead lan_mac.

Based on this PR for ath79:
https://github.com/openwrt/openwrt/pull/1726

Signed-off-by: David Santamaría Rogado <howl.nsp@gmail.com>
[fix alphabetical ordering, reword subject]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 months agoopenssl: bump to 1.0.2q
Sven Roederer [Mon, 28 Jan 2019 19:11:50 +0000 (20:11 +0100)]
openssl: bump to 1.0.2q

This fixes the following security problems:
 * CVE-2018-5407: Microarchitecture timing vulnerability in ECC scalar multiplication
 * CVE-2018-0734: Timing vulnerability in DSA signature generation
 * Resolve a compatibility issue in EC_GROUP handling with the FIPS Object Module

Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
3 months agouhttpd: disable concurrent requests by default
Jo-Philipp Wich [Wed, 30 Jan 2019 09:12:00 +0000 (10:12 +0100)]
uhttpd: disable concurrent requests by default

In order to avoid straining CPU and memory resources on lower end devices,
avoid running multiple CGI requests in parallel.

Ref: https://forum.openwrt.org/t/high-load-fix-on-openwrt-luci/29006
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 months agoiproute2: drop libbsd dependency
Hans Dedecker [Tue, 29 Jan 2019 12:37:24 +0000 (13:37 +0100)]
iproute2: drop libbsd dependency

As the usage of libbsd is no longer limited to glibc, prevent libbsd
being picked up by removing the dependency on libbsd.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
3 months agowpa_supplicant: fix calling channel switch via wpa_cli on mesh interfaces
Felix Fietkau [Mon, 28 Jan 2019 20:36:44 +0000 (21:36 +0100)]
wpa_supplicant: fix calling channel switch via wpa_cli on mesh interfaces

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agohostapd: add support for passing CSA events from sta/mesh to AP interfaces
Felix Fietkau [Mon, 28 Jan 2019 20:35:25 +0000 (21:35 +0100)]
hostapd: add support for passing CSA events from sta/mesh to AP interfaces

Fixes handling CSA when using AP+STA or AP+Mesh

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agoramips: move wifi related interrupts off the main core on SMP systems
Felix Fietkau [Mon, 21 Jan 2019 16:14:52 +0000 (17:14 +0100)]
ramips: move wifi related interrupts off the main core on SMP systems

Improves LAN<->WLAN bridging/routing performance

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agomac80211: fix an issue with allocated tailroom for encrypted mgmt packets
Felix Fietkau [Mon, 28 Jan 2019 12:23:34 +0000 (13:23 +0100)]
mac80211: fix an issue with allocated tailroom for encrypted mgmt packets

Fixes kernel warnings and connectivity issues in encrypted mesh networks

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 months agokernel: Add missing config option for kernel 4.14
Hauke Mehrtens [Mon, 28 Jan 2019 20:36:28 +0000 (21:36 +0100)]
kernel: Add missing config option for kernel 4.14

Kernel 4.14.96 got the new configuration option
CIFS_ALLOW_INSECURE_LEGACY which allows to deactivate support for old
and insecure SMB versions like 1.0 and 2.0. Still allow these old SMB
version and fix build problems which occurred because this option was
not defined.

This was found by build bot.

Fixes: 3662157d8bed ("kernel: bump 4.14 to 4.14.96")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 months agoimx6: add support for kernel 4.19
Koen Vandeputte [Mon, 28 Jan 2019 15:34:27 +0000 (16:34 +0100)]
imx6: add support for kernel 4.19

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 4.19 to 4.19.18
Koen Vandeputte [Mon, 28 Jan 2019 12:07:54 +0000 (13:07 +0100)]
kernel: bump 4.19 to 4.19.18

Refreshed all patches.

Removed upstreamed:
- 031-v5.0-MIPS-BCM47XX-Setup-struct-device-for-the-SoC.patch
- 142-jffs2-Fix-use-of-uninitialized-delayed_work-lockdep-.patch

Removed upstreamed hunk in:
- 800-bcma-get-SoC-device-struct-copy-its-DMA-params-to-th.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agocns3xxx: don't use invalid mask value for clock events
Koen Vandeputte [Mon, 28 Jan 2019 12:54:02 +0000 (13:54 +0100)]
cns3xxx: don't use invalid mask value for clock events

According to a commit from kernel 4.18-rc3, it's not valid
to use "cpu_mask_all" for clock events and it should be
replaced in favor of "cpu_possible_mask" [1]

This warning was seen when booting kernel 4.19 on a cns3xxx board.
Let's fix it also here just to be safe.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v4.19.18&id=fbfa9260085b5b578a049a90135e5c51928c5f7f

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agocns3xxx: add support for kernel 4.19
Koen Vandeputte [Mon, 28 Jan 2019 09:05:10 +0000 (10:05 +0100)]
cns3xxx: add support for kernel 4.19

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agocns3xxx: use actual size reads for PCIe (4.19)
Koen Vandeputte [Mon, 28 Jan 2019 09:08:24 +0000 (10:08 +0100)]
cns3xxx: use actual size reads for PCIe (4.19)

upstream commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
reimplemented cns3xxx_pci_read_config() using pci_generic_config_read32(),
which preserved the property of only doing 32-bit reads.

It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(),
so it changed writes from always being 32 bits to being the actual size,
which works just fine.

Due to:
- The documentation does not mention that only 32 bit access is allowed.
- Writes are already executed using the actual size
- Extensive testing shows that 8b, 16b and 32b reads work as intended

It makes perfectly sense to also swap 32 bit reading in favor of actual size.

also backport this patch to kernel 4.19

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agocns3xxx: refresh kernel config
Koen Vandeputte [Mon, 28 Jan 2019 13:10:46 +0000 (14:10 +0100)]
cns3xxx: refresh kernel config

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 4.14 to 4.14.96
Koen Vandeputte [Mon, 28 Jan 2019 10:03:25 +0000 (11:03 +0100)]
kernel: bump 4.14 to 4.14.96

Refreshed all patches.

Remove upstreamed patches:
- 142-jffs2-Fix-use-of-uninitialized-delayed_work-lockdep-.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 4.9 to 4.9.153
Koen Vandeputte [Mon, 28 Jan 2019 10:02:46 +0000 (11:02 +0100)]
kernel: bump 4.9 to 4.9.153

Refreshed all patches.

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agokernel: bump 3.18 to 3.18.133
Koen Vandeputte [Mon, 28 Jan 2019 09:58:35 +0000 (10:58 +0100)]
kernel: bump 3.18 to 3.18.133

Refreshed all patches.

Compile-tested on: adm5120
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
3 months agobrcm2708: Fix kmod-regmap split
Hauke Mehrtens [Sun, 27 Jan 2019 18:34:42 +0000 (19:34 +0100)]
brcm2708: Fix kmod-regmap split

There are more regmap dependencies missing in the brcm2708 target.

Fixes: fd5c16870169 ("kernel: Build: Split kmod-regmap")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 months agomap: depend on nat46, provide map-t
Hans Dedecker [Sun, 27 Jan 2019 12:10:28 +0000 (13:10 +0100)]
map: depend on nat46, provide map-t

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
3 months ago464xlat: import from routing, add myself as maintainer
Hans Dedecker [Sun, 27 Jan 2019 12:07:52 +0000 (13:07 +0100)]
464xlat: import from routing, add myself as maintainer

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
3 months agonat46: import for routing, add myself as maintainer
Hans Dedecker [Sun, 27 Jan 2019 12:06:40 +0000 (13:06 +0100)]
nat46: import for routing, add myself as maintainer

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
3 months agoath79: add support for TP-Link Archer C2 V3 (AC900)
Skirmantas Lauzikas [Sun, 28 Oct 2018 04:30:52 +0000 (06:30 +0200)]
ath79: add support for TP-Link Archer C2 V3 (AC900)

This commit adds support for the TP-link Archer C2 V3 (AC900).

Specifications:

 - CPU: QCA9563 750Mhz
 - Ram: 64MB (DDR2)
 - Flash: 8MB (SPI NOR)
 - Ethernet: 5x 10/100/1000
 - Wifi: QCA9563 bgn + QCA9887 an+ac
 - 9x Leds, 2x buttons

Flash instructions:

Upload openwrt-ath79-generic-tplink_archer-c2-v3-squashfs-factory.bin
via the router Web interface and flash as normal firmware update.

Signed-off-by: Skirmantas Lauzikas <skirmantas.lauzikas@blackraven.lt>
[reorder entries, fix trailing whitespace in dts, add firmware partition
 compatible string, remove led default off states, use default on state
 for system led, reuse tplink-safeloader-uimage image build recipe, squash
 with dynamic partitioning commit, reword commit message, add
 installation instructions]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 months agofirmware-utils: tplink-safeloader: Fix for Archer C2 V3 image generation
Skirmantas Lauzikas [Wed, 14 Nov 2018 13:45:41 +0000 (15:45 +0200)]
firmware-utils: tplink-safeloader: Fix for Archer C2 V3 image generation

Fix for factory image generation, so that stock firmware will accept the
openwrt image.

Ref: https://forum.openwrt.org/t/support-for-tp-link-archer-c2-v3/15617/17
Signed-off-by: Skirmantas Lauzikas <skirmantas.lauzikas@blackraven.lt>
[reword commit message, use correct order for conditions,
 trim trailing whitespace]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 months agotools: tplink-safeloader: add C7v5 RU Support
Michael Gray [Fri, 18 Jan 2019 07:49:15 +0000 (18:49 +1100)]
tools: tplink-safeloader: add C7v5 RU Support

The added entry originates from TP-Links latest Archer C7 v5 RU firmware.

Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
3 months agobrcm63xx: VH4032N: add missing pinctrl
Daniel Gonzalez Cabanelas [Mon, 31 Dec 2018 11:20:54 +0000 (12:20 +0100)]
brcm63xx: VH4032N: add missing pinctrl

Add missing pin controls for the Observa VH4032N router.

This fixes the wifi radio and ethernet LAN LEDs.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
3 months agobrcm63xx: VH4032N: fix the power led and the wlan button
Daniel Gonzalez Cabanelas [Sun, 30 Dec 2018 13:59:30 +0000 (14:59 +0100)]
brcm63xx: VH4032N: fix the power led and the wlan button

- use the blue LED for power, since the red LED is already used by
  CFE in emergency mode.
- use the correct code for the wlan button

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
3 months agobrcm2708: Move kmod-sound-soc-3dlab-nano-player to sound modules
Hauke Mehrtens [Sun, 27 Jan 2019 10:07:24 +0000 (11:07 +0100)]
brcm2708: Move kmod-sound-soc-3dlab-nano-player to sound modules

kmod-sound-soc-3dlab-nano-player was in the global kernel menu before,
add the dependency to sound to move it to the correct category.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 months agokernel: Fix kmod-regmap split
Hauke Mehrtens [Sun, 27 Jan 2019 10:04:58 +0000 (11:04 +0100)]
kernel: Fix kmod-regmap split

Two regmap dependencies were wrong, this patch fixes them.
This was detected by the build bots.

Fixes: fd5c16870169 ("kernel: Build: Split kmod-regmap")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 months agombedtls: Kconfig option to enable/disable debug functions
Michael Heimpold [Thu, 3 Jan 2019 23:00:41 +0000 (00:00 +0100)]
mbedtls: Kconfig option to enable/disable debug functions

This introduces a new Kconfig option to switch on/off mbedtls' support
for debug functions.

The idea behind is to inspect TLS traffic with Wireshark for debug
purposes. At the moment, there is no native or 'nice' support for
this, but at
https://github.com/Lekensteyn/mbedtls/commit/68aea15833e1ac9290b8f52a4223fb4585fb3986
an example implementation can be found which uses the debug functions
of the library. However, this requires to have this debug stuff enabled
in the library, but at the moment it is staticly patched out.

So this patch removes the static part from the configuration patch
and introduces a dynamic config file editing during build.

When enabled, this heavily increases the library size, so I added
a warning in the Kconfig help section.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
3 months agombedtls: update to 2.16.0
Deng Qingfang [Thu, 3 Jan 2019 11:03:22 +0000 (19:03 +0800)]
mbedtls: update to 2.16.0

Refresh patch

https://tls.mbed.org/tech-updates/releases/mbedtls-2.16.0-2.7.9-and-2.1.18-released

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
3 months agoupdate uClibc-ng from 1.0.30 to 1.0.31
protonesso [Fri, 4 Jan 2019 14:57:01 +0000 (06:57 -0800)]
update uClibc-ng from 1.0.30 to 1.0.31

Signed-off-by: protonesso <nagakamira@gmail.com>
3 months agolantiq/led_dsl: Fix netdev led trigger
Martin Schiller [Thu, 10 Jan 2019 07:59:31 +0000 (08:59 +0100)]
lantiq/led_dsl: Fix netdev led trigger

In the upstream netdev led trigger the one mode file was replaced by 3
files named rx, tx and link. Fix the netdev trigger configuration code
to use the modified API.

This fix is based on 201058b35ce ("base-files: Fix netdev led trigger")

Fixes: aa3b6a08c56 ("kernel: Replace ledtrig-netdev with upstream backport")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
3 months agosunxi: Add support for SY8106A voltage regulator
Daniel Engberg [Tue, 15 Jan 2019 01:36:42 +0000 (02:36 +0100)]
sunxi: Add support for SY8106A voltage regulator

Add support for Silergy SY8106A voltage regulator which is
needed for cpufreq support on boards such as Orange Pi PC

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
[Remove CONFIG_REGULATOR_SY8106A from cortexa7]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 months agokernel: add kmod-usb-gadget-cdc-composite
Karl Pálsson [Thu, 20 Dec 2018 09:55:09 +0000 (09:55 +0000)]
kernel: add kmod-usb-gadget-cdc-composite

This builds the "g_cdc" gadget module, providing ethernet+serial.

Signed-off-by: Karl Pálsson <karlp@etactica.com>
3 months agobuild: dtc: Disable noisy warnings by default
Petr Štetiar [Mon, 7 Jan 2019 00:08:05 +0000 (01:08 +0100)]
build: dtc: Disable noisy warnings by default

While helping with review and build testing of a few 4.19 pull requests,
I've noticed, that dtc compiler in OpenWrt uses different options then
upstream kernel, which is leading to a very noisy output[1]. It wouldn't
be that bad per se, but a lot of such warnings aren't easily fixable so
I think, that we should follow what upstream does and simply ignore^W
silence those noisy warnings.

So this patch tries to syncs dtc compiler flags with upstream kernel
till version 4.19.13, disabling those warnings as they were added in
upstream kernel:

 v4.6-rc1-2-gbc55398 dtc: turn off dtc unit address warnings by default

  The newly added dtc warning to check DT unit-address without reg
  property and vice-versa generates lots of warnings. Turn off the check
  unless building with W=1 or W=2.

 v4.11-rc2-11-g8654cb8 dtc: update warning settings for new bus and node/property

  dtc gained new warnings checking PCI and simple buses, unit address
  formatting, and stricter node and property name checking. Disable the
  new dtc warnings by default as there are 1000s. As before, warnings are
  enabled with W=1 or W=2. The strict node and property name checks are a
  bit subjective, so they are only enabled for W=2.

 v4.16-rc3-9-g4fd98e3 scripts: turn off some new dtc warnings by default

  The latest dtc update adds some new noisy warnings, so turn them off by
  default. Disable 'avoid_unnecessary_addr_size' and 'alias_paths'. They
  can be re-enabled by building with 'W=1'.

 v4.17-rc1-27-g74656b6 kbuild: disable new dtc graph and unit-address warnings

  dtc gained some new warnings for OF graphs and unique unit addresses,
  but they are currently much too noisy. So turn off
  'graph_child_address', 'graph_port', and 'unique_unit_address' warnings
  by default. They can be enabled by building dtbs with W=1.

Build tested on imx6 and ath79 with 4.14 and 4.19.

1. https://github.com/openwrt/openwrt/pull/1694#issuecomment-450864335

Signed-off-by: Petr Štetiar <ynezz@true.cz>
3 months agomvebu: backport upstream fixes for armada 37xx
Tomasz Maciej Nowak [Sun, 13 Jan 2019 20:30:26 +0000 (21:30 +0100)]
mvebu: backport upstream fixes for armada 37xx

Upstream patches for processor frequency scaling, which fix possible
system hard lockups.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
3 months agomvebu: espressobin: correct spi node in dts
Tomasz Maciej Nowak [Sun, 13 Jan 2019 20:30:25 +0000 (21:30 +0100)]
mvebu: espressobin: correct spi node in dts

Drop customizations in:
508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch
and move them to separate patch, with broader explanation.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
3 months agomvebu: sort armada 37xx upstream patches chronologically
Tomasz Maciej Nowak [Sun, 13 Jan 2019 20:30:24 +0000 (21:30 +0100)]
mvebu: sort armada 37xx upstream patches chronologically

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
3 months agomvebu: move HARDEN_BRANCH_PREDICTOR to common config
Tomasz Maciej Nowak [Sun, 13 Jan 2019 20:29:22 +0000 (21:29 +0100)]
mvebu: move HARDEN_BRANCH_PREDICTOR to common config

This symbol is enabled in all subtargets, move it to common kernel
config.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
Acked-by: Rosen Penev <rosenp@gmail.com>
3 months agokernel: Build: Split kmod-regmap
Hauke Mehrtens [Fri, 11 Jan 2019 17:05:11 +0000 (18:05 +0100)]
kernel: Build: Split kmod-regmap

This reduces the needed modifications to the mainline Linux kernel and
also makes the regmap package work with an out of tree kernel which
does not have these modifications.

The regmap-core is only added when it is really build as a module.
The regmap-core is normally bool so it cannot be built as a module in an
unmodified kernel. When it is selected by on other kernel module it will
always be selected as build in and it also does not show up in
$(LINUX_DIR)/modules.builtin as it is not supposed to be a kernel module.
When it is not in $(LINUX_DIR)/modules.builtin the build system expects
it to be built as a .ko file.
Just check if the module is really there and only add it in that case.

This splits the regmap package into multiple packages, one for each bus type.
This way only the bus maps which are really needed have to be added.
This also splits the I2C, SPI and MMIO regmap into separate packages to not
require all these subsystems to build them, on an unmodified upstream kernel
this also causes problems in some situations.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
3 months agosunxi: spi flash dts changes
Oskari Lemmela [Mon, 14 Jan 2019 17:54:23 +0000 (19:54 +0200)]
sunxi: spi flash dts changes

Backport A64 SPI flash DTS changes to 4.14 kernel.

Add Openwrt specific flash partitions to Sopine.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
3 months agosunxi: add spi flash support to kernel
Oskari Lemmela [Mon, 14 Jan 2019 17:54:22 +0000 (19:54 +0200)]
sunxi: add spi flash support to kernel

Some of sunxi devices have onboard SPI flash.
Enable SPI NOR support and MTD fit split in kernel config.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
3 months agosunxi: add a64 watchdog support
Oskari Lemmela [Mon, 14 Jan 2019 17:54:21 +0000 (19:54 +0200)]
sunxi: add a64 watchdog support

Backport A64 watchdog DTS change to 4.14 kernel.

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>