openwrt/openwrt.git
10 months agowireguard: bump to 1.0.20200330
Jason A. Donenfeld [Tue, 31 Mar 2020 00:25:29 +0000 (18:25 -0600)]
wireguard: bump to 1.0.20200330

* queueing: backport skb_reset_redirect change from 5.6
* version: bump

This release has only one slight change, to put it closer to the 5.6
codebase, but its main purpose is to bump us to a 1.0.y version number.
Now that WireGuard 1.0.0 has been released for Linux 5.6 [1], we can put
the same number on the backport compat codebase.

When OpenWRT bumps to Linux 5.6, we'll be able to drop this package
entirely, which I look forward to seeing.

[1] https://lists.zx2c4.com/pipermail/wireguard/2020-March/005206.html

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
10 months agogeneric: mips: exclude more dsemul code when fpu-emu is not enabled
Yousong Zhou [Tue, 3 Mar 2020 15:09:47 +0000 (23:09 +0800)]
generic: mips: exclude more dsemul code when fpu-emu is not enabled

The patch is backported from mips-next.  In addition to minor reduction
of code size and runtime memory use, the more apparent difference is
that the delay slot emulation page will not be present for those targets
with fpu emulation disabled (CONFIG_MIPS_FP_SUPPORT=n)

Memory maps of busybox before and after this change

  root@OpenWrt:/# cat /proc/self/maps
  00400000-00449000 r-xp 00000000 00:02 23         /bin/busybox
  00458000-00459000 r-xp 00048000 00:02 23         /bin/busybox
  00459000-0045a000 rwxp 00049000 00:02 23         /bin/busybox
  77dc0000-77de2000 r-xp 00000000 00:02 273        /lib/libgcc_s.so.1
  77de2000-77de3000 r-xp 00012000 00:02 273        /lib/libgcc_s.so.1
  77de3000-77de4000 rwxp 00013000 00:02 273        /lib/libgcc_s.so.1
  77de4000-77e7b000 r-xp 00000000 00:02 271        /lib/libc.so
  77e8a000-77e8c000 rwxp 00096000 00:02 271        /lib/libc.so
  77e8c000-77e8e000 rwxp 00000000 00:00 0
  7fd86000-7fda7000 rw-p 00000000 00:00 0          [stack]
  7fefd000-7fefe000 r-xp 00000000 00:00 0
  7ffe6000-7ffe7000 r--p 00000000 00:00 0          [vvar]
  7ffe7000-7ffe8000 r-xp 00000000 00:00 0          [vdso]

  root@OpenWrt:/# cat /proc/self/maps
  00400000-00449000 r-xp 00000000 00:02 23         /bin/busybox
  00458000-00459000 r-xp 00048000 00:02 23         /bin/busybox
  00459000-0045a000 rwxp 00049000 00:02 23         /bin/busybox
  77d55000-77d77000 r-xp 00000000 00:02 274        /lib/libgcc_s.so.1
  77d77000-77d78000 r-xp 00012000 00:02 274        /lib/libgcc_s.so.1
  77d78000-77d79000 rwxp 00013000 00:02 274        /lib/libgcc_s.so.1
  77d79000-77e10000 r-xp 00000000 00:02 272        /lib/libc.so
  77e1f000-77e21000 rwxp 00096000 00:02 272        /lib/libc.so
  77e21000-77e23000 rwxp 00000000 00:00 0
  7fe23000-7fe44000 rw-p 00000000 00:00 0          [stack]
  7ff63000-7ff64000 r--p 00000000 00:00 0          [vvar]
  7ff64000-7ff65000 r-xp 00000000 00:00 0          [vdso]

Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
10 months agotplink-safeloader: update soft_ver for TP-Link Archer C6 v2 (EU)
Georgi Vlaev [Fri, 27 Mar 2020 10:33:53 +0000 (12:33 +0200)]
tplink-safeloader: update soft_ver for TP-Link Archer C6 v2 (EU)

The last couple of TP-Link firmware releases for Archer C6 v2 (EU)
have switched to version 1.2.x. Bump the soft_ver to "1.2.1" to
allow firmware updates from the vendor web interface.

TP-Link vendor firmware releases supported by this change:
* Archer C6(EU)_V2_200110: soft_ver:1.2.1 Build 20200110 rel.60119
* Archer C6(EU)_V2_191014: soft_ver:1.2.0 Build 20191014 rel.33289

Signed-off-by: Georgi Vlaev <georgi.vlaev@gmail.com>
10 months agoath10k-ct: Support AQL on ath10k CT_KVER-5.4
Jose Olivera [Sat, 28 Mar 2020 16:11:36 +0000 (00:11 +0800)]
ath10k-ct: Support AQL on ath10k CT_KVER-5.4

Commit ea50780 backported Airtime Queue Limits (AQL) from Linux 5.5
to OpenWrt's backports 5.4. However, this only enabled AQL for the
vanilla ath10k driver. This patch also enables it for ath10k-ct.

Tested on:
* 2xTP-Link Archer A7v5 (QCA9563/QCA988X)
* Backports version 5.4-rc8 & 5.4.27
* ath10k-ct and ath10k-ct-htt firmware version 014 to 017
* ath10k-ct driver versions dc025dc to 3d173a4 (CT_KVER-5.4)
* WPA2, 802.11krv

Tested since January 25, 2020.

Signed-off-by: Jose Olivera <oliverajeo@gmail.com>
10 months agohostapd: add abridged flag in disassoc_imminent
Nick Hainke [Tue, 24 Mar 2020 22:12:01 +0000 (23:12 +0100)]
hostapd: add abridged flag in disassoc_imminent

If the abridged flag is set to 1 the APs that are listed in the BSS
Transition Candidate List are prioritized. If the bit is not set, the
APs have the same prioritization as the APs that are not in the list.

If you want to steer a client, you should set the flag!

The flag can be set by adding {...,'abridged': true,...} to the normal
ubus call.

Signed-off-by: Nick Hainke <vincent@systemli.org>
10 months agohostapd: expose beacon reports through ubus
Nick Hainke [Fri, 6 Dec 2019 17:17:06 +0000 (18:17 +0100)]
hostapd: expose beacon reports through ubus

Subscribe to beacon reports through ubus.
Can be used for hearing map and client steering purposes.

First enable rrm:
    ubus call hostapd.wlan0 bss_mgmt_enable '{"beacon_report":True}'

Subscribe to the hostapd notifications via ubus.

Request beacon report:
    ubus call hostapd.wlan0 rrm_beacon_req
'{"addr":"00:xx:xx:xx:xx:xx", "op_class":0, "channel":1,
"duration":1,"mode":2,"bssid":"ff:ff:ff:ff:ff:ff", "ssid":""}'

Signed-off-by: Nick Hainke <vincent@systemli.org>
[rework identation]
Signed-off-by: David Bauer <mail@david-bauer.net>
10 months agohostapd: Add 802.11r support for WPA3-Enterprise
Jesus Fernandez Manzano [Fri, 27 Mar 2020 11:19:05 +0000 (12:19 +0100)]
hostapd: Add 802.11r support for WPA3-Enterprise

Signed-off-by: Jesus Fernandez Manzano <jesus.manzano@galgus.net>
10 months agokernel: Enable CMOS RTC support on 5.4
Kevin Darbyshire-Bryant [Sun, 29 Mar 2020 20:38:10 +0000 (21:38 +0100)]
kernel: Enable CMOS RTC support on 5.4

Enable kernel symbol CONFIG_RTC_DRV_CMOS which was enabled in 4.14 &
4.19

Fixes FS#2905 and now my APU2 picks up time from RTC

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
10 months agoramips: Deactivate NETGEAR WNCE2001 by default
Hauke Mehrtens [Sun, 29 Mar 2020 20:33:10 +0000 (22:33 +0200)]
ramips: Deactivate NETGEAR WNCE2001 by default

The root file system is getting too big for this device and this breaks
the ramips/rt305x build.

Do not build images for this board by default to fix this problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
10 months agoodhcp6c: update to latest git HEAD
Hans Dedecker [Sun, 29 Mar 2020 20:21:16 +0000 (22:21 +0200)]
odhcp6c: update to latest git HEAD

f575351 ra: fix sending router solicitations

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
10 months agodnsmasq: bump to 2.81rc4
Kevin Darbyshire-Bryant [Thu, 19 Mar 2020 19:15:49 +0000 (19:15 +0000)]
dnsmasq: bump to 2.81rc4

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
10 months agonftables: implement no/json variants
Kevin Darbyshire-Bryant [Wed, 25 Mar 2020 09:13:46 +0000 (09:13 +0000)]
nftables: implement no/json variants

Replace the build time choice of json support with a package based
choice.  Users requiring a json aware version of 'nft' may now install
nftables-json.

The default choice to fulfill the 'nftables' package dependency is
'nftables-nojson'

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
10 months agojansson: import jansson from packages
Kevin Darbyshire-Bryant [Sat, 28 Mar 2020 11:27:27 +0000 (11:27 +0000)]
jansson: import jansson from packages

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
10 months agotreewide: Don't diverge from upstream default HZ settings on 4.19
Daniel Engberg [Mon, 18 Feb 2019 09:13:19 +0000 (09:13 +0000)]
treewide: Don't diverge from upstream default HZ settings on 4.19

Most targets upstream use 250Hz or even 1000Hz by default while
100Hz is hardcoded in OpenWrt's default config. Use upstream default
except for apm821xx which hardsets 1000Hz instead of platform default of
250Hz.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
[Apply same changes to 5.4]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
10 months agomac80211: Update to version 5.4.27
Hauke Mehrtens [Fri, 13 Mar 2020 13:07:23 +0000 (14:07 +0100)]
mac80211: Update to version 5.4.27

The removed patches are all integrated in the upstream version now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
10 months agomac80211: Fix rt2x00 exports
Hauke Mehrtens [Sun, 29 Mar 2020 13:59:27 +0000 (15:59 +0200)]
mac80211: Fix rt2x00 exports

Do not export static functions, they are anyway not referenced by any
code in a different module.

This fixes the following compile warning:
WARNING: "rt2800_rf_aux_tx0_loopback" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_write_dc" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_rf_configstore" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_do_sqrt_accumulation" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_rf_configrecover" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_loft_search" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_iq_search" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_setbbptonegenerator" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL
WARNING: "rt2800_rf_aux_tx1_loopback" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL

Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
10 months agokernel: generic: 5.4: fix mtd concat panic on read/write functions
Michal Cieslakiewicz [Fri, 27 Mar 2020 20:15:00 +0000 (21:15 +0100)]
kernel: generic: 5.4: fix mtd concat panic on read/write functions

Commit 2431c4f5b46c32c4ac495456b1ef4ce59c0bb85d ("mtd: Implement
mtd_{read,write}() as wrappers around mtd_{read,write}_oob()") for kernel 5.4
restrict mtd devices to register only one type of read/write functions
(either generic or OOB).

mtd concat does not follow above rule and defines both methods at the same
time, causing this type of device to be rejected by kernel. For routers that
use mtd concat for root UBI volume that means kernel panic and boot loop with
following error:

[    0.767307] Creating 1 MTD partitions on "ubi-concat":
[    0.772547] 0x000000000000-0x000007500000 : "ubi"
[    0.777953] ------------[ cut here ]------------
[    0.782683] WARNING: CPU: 0 PID: 1 at drivers/mtd/mtdcore.c:621 add_mtd_device+0x84/0x5f4
[    0.790983] Modules linked in:
[    0.794093] CPU: 0 PID: 1 Comm: swapper Not tainted 5.4.24 #0
[    0.799932] Stack : 80680000 8062af20 00000000 00000000 8062a0f0 87c2dae4 87c282fc 8065fd23
[    0.808430]         805c64f4 00000001 807b32d8 80670000 80670000 00000001 87c2da98 25c15bcb
[    0.816909]         00000000 00000000 807e0000 0000006e 61696e74 00000000 2e342e32 34202330
[    0.825397]         0000006e cef2ada7 00000000 000c1ded 00000000 00000009 00000000 8034de64
[    0.833889]         00000009 80670000 80670000 80676d18 00000000 80320044 00000000 807b0000
[    0.842381]         ...
[    0.844861] Call Trace:
[    0.847367] [<80069994>] show_stack+0x30/0x100
[    0.851913] [<8007e8ac>] __warn+0xc0/0x10c
[    0.856072] [<8007e954>] warn_slowpath_fmt+0x5c/0xac
[    0.861134] [<8034de64>] add_mtd_device+0x84/0x5f4
[    0.866001] [<80352a50>] add_mtd_partitions+0xd8/0x1b8
[    0.871231] [<803527b8>] parse_mtd_partitions+0x238/0x3f8
[    0.876717] [<8034e51c>] mtd_device_parse_register+0x48/0x1b0
[    0.882586] [<8038dd2c>] virt_concat_probe+0x170/0x1ec
[    0.887820] [<803334c8>] platform_drv_probe+0x40/0x94
[    0.892970] [<80331638>] really_probe+0x104/0x35c
[    0.897766] [<80331d54>] device_driver_attach+0x70/0x98
[    0.903072] [<80331ddc>] __driver_attach+0x60/0x100
[    0.908042] [<8032f668>] bus_for_each_dev+0x68/0xa4
[    0.912989] [<803309d4>] bus_add_driver+0x1f0/0x200
[    0.917952] [<80332448>] driver_register+0x84/0x148
[    0.922906] [<80060a1c>] do_one_initcall+0x7c/0x1dc
[    0.927870] [<80684e14>] kernel_init_freeable+0x158/0x23c
[    0.933361] [<805387d8>] kernel_init+0x10/0xf0
[    0.937883] [<80064dd8>] ret_from_kernel_thread+0x14/0x1c
[    0.943375] ---[ end trace 62e0927fba490f68 ]---
[...]
[    2.266513] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[    2.274893] Rebooting in 1 seconds..

This patch makes mtd concat to follow new mtd requirements by registering
either normal or oob versions of read/write functions, but not both at the
same time. OOB is used only when underlying mtd devices provide such
functionality (like NAND chips) - otherwise generic methods are used.

Tested successfully on Netgear WNDR4300.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
10 months agoarchs38: switch to kernel 5.4 by default
Evgeniy Didin [Sat, 28 Mar 2020 11:12:36 +0000 (14:12 +0300)]
archs38: switch to kernel 5.4 by default

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Petr Štetiar <ynezz@true.cz>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
10 months agoarchs38: Add patch for gcc8 compilance
Evgeniy Didin [Sat, 28 Mar 2020 11:12:35 +0000 (14:12 +0300)]
archs38: Add patch for gcc8 compilance

Building Linux kernel version 5.4.x with GCC8 ends up
with internal compiler error. The workaround on this issue
can be introdution of additional compiler option "--mmpy-option=2"

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Petr Štetiar <ynezz@true.cz>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
10 months agoarchs38: add kernel 5.4 config
Evgeniy Didin [Sat, 28 Mar 2020 11:12:34 +0000 (14:12 +0300)]
archs38: add kernel 5.4 config

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Petr Štetiar <ynezz@true.cz>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
[run make kernel_oldconfig CONFIG_TARGET=target]
[Do not deactivate CONFIG_NET_VENDOR_*]
[Activate CONFIG_HARDENED_USERCOPY]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
10 months agokernel: update arc-specific patch
Evgeniy Didin [Sat, 28 Mar 2020 11:12:37 +0000 (14:12 +0300)]
kernel: update arc-specific patch

This patch updates arc-specific patch by moving declaration
of struct object before it's usage.

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Petr Štetiar <ynezz@true.cz>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: John Crispin <john@phrozen.org>
10 months agocurl: rebuild when libopenssl config changes
DENG Qingfang [Thu, 31 Oct 2019 15:39:02 +0000 (23:39 +0800)]
curl: rebuild when libopenssl config changes

When some libopenssl options change curl will have to be rebuild to
adapt to those changes, avoiding undefined reference errors or features
disabled in curl.

Add CONFIG_OPENSSL_ENGINE, CONFIG_OPENSSL_WITH_COMPRESSION and
CONFIG_OPENSSL_WITH_NPN to PKG_CONFIG_DEPENDS so it will trigger
rebuild every time the options are changed.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
10 months agomac80211: rtl8723bs: fix missing MMC dependency
Petr Štetiar [Sat, 28 Mar 2020 14:01:47 +0000 (15:01 +0100)]
mac80211: rtl8723bs: fix missing MMC dependency

Building of ath79-tiny has uncovered following:

 Package kmod-rtl8723bs is missing dependencies for the following libraries:
 mmc_core.ko

So add this missing dependency.

Fixes: 8c26d67a67d0 ("mac80211: realtek: add staging driver for RTL8723BS SDIO module")
Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agomvebu: cortexa9: correct cpu subtype
Tomasz Maciej Nowak [Wed, 18 Mar 2020 18:04:12 +0000 (19:04 +0100)]
mvebu: cortexa9: correct cpu subtype

Armada 370  processors have only 16 double-precision registers. The
change introduced by 8dcc1087602e ("toolchain: ARM: Fix toolchain
compilation for gcc 8.x") switched accidentally the toolchain for mvebu
cortexa9 subtarget to cpu type with 32 double-precision registers. This
stems from gcc defaults which assume "vfpv3-d32" if only "vfpv3" as mfpu
is specified. That change resulted in unusable image, in which kernel
will kill userspace as soon as it causing "Illegal instruction".

Ref: https://forum.openwrt.org/t/gcc-was-broken-on-mvebu-armada-370-device-after-commit-on-2019-03-25/43272
Fixes: 8dcc1087602e ("toolchain: ARM: Fix toolchain compilation for
gcc 8.x")
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
10 months agotegra: correct cpu subtype
Tomasz Maciej Nowak [Wed, 18 Mar 2020 18:04:13 +0000 (19:04 +0100)]
tegra: correct cpu subtype

Tegra 2 processors have only 16 double-precision registers. The change
introduced by 8dcc1087602e ("toolchain: ARM: Fix toolchain compilation
for gcc 8.x") switched accidentally the toolchain for tegra target to cpu
type with 32 double-precision registers. This stems from gcc defaults
which assume "vfpv3-d32" if only "vfpv3" as mfpu is specified. That
change resulted in unusable image, in which kernel will kill userspace as
soon as it causing "Illegal instruction".

Ref: https://forum.openwrt.org/t/gcc-was-broken-on-mvebu-armada-370-device-after-commit-on-2019-03-25/43272
Fixes: 8dcc1087602e ("toolchain: ARM: Fix toolchain compilation for
gcc 8.x")
Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
10 months agox86: fix missing squashfs and ext4 rootfs images
Paul Spooren [Wed, 25 Mar 2020 19:25:10 +0000 (09:25 -1000)]
x86: fix missing squashfs and ext4 rootfs images

The previous rework of x86 image creation done in commit cb007a7bf619
("x86: switch image generation to new code") removed images of separate
squashfs and ext4 filesystems which are handy for example in testing
under QEMU.

So this patch adds back creation of those missing rootfs images for ext4
and squashfs based filesystems.

Fixes: cb007a7bf619 ("x86: switch image generation to new code")
Signed-off-by: Paul Spooren <mail@aparcar.org>
[commit subject and description tweaks]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agox86: fix padding in images
Paul Spooren [Wed, 25 Mar 2020 07:06:57 +0000 (21:06 -1000)]
x86: fix padding in images

The previous rework of x86 image creation done in commit  cb007a7bf619
("x86: switch image generation to new code") broke the padding in
images.

 sda: p2 size 212992 extends beyond EOD, enabling native capacity
 sda: p2 size 212992 extends beyond EOD, truncated
 sd 0:0:0:0: [sda] Attached SCSI disk
 SQUASHFS error: squashfs_read_data failed to read block 0x2cc556
 unable to read id index table
 VFS: Cannot open root device "PARTUUID=ac5c9cd8-02" or unknown-block(8,2): error -5
 Please append a correct "root=" boot option; here are the available partitions:
 0800           19761 sda
  driver: sd
   0801           16384 sda1 ac5c9cd8-01

   0802            2865 sda2 ac5c9cd8-02

 Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,2)

Tested with x86/64 with Docker (squashfs), qemustart (ext4/squashfs) and
virtualbox (ext4/squashfs).

Ref: FS#2935
Fixes: cb007a7bf619 ("x86: switch image generation to new code")
Suggested-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Paul Spooren <mail@aparcar.org>
[commit subject and description tweaks]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agokernel: package gpio-f7188x driver
Nick Bowler [Wed, 25 Mar 2020 02:00:30 +0000 (22:00 -0400)]
kernel: package gpio-f7188x driver

This driver enables support for the GPIO capabilities found in many
Fintek Super-IO chips.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
10 months agokernel: package f71808e-wdt driver
Nick Bowler [Wed, 25 Mar 2020 02:00:29 +0000 (22:00 -0400)]
kernel: package f71808e-wdt driver

This driver enables support for the watchdog timers found in many
Fintek Super-IO chips.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
10 months agokernel: package f71882fg hwmon driver
Nick Bowler [Wed, 25 Mar 2020 02:00:28 +0000 (22:00 -0400)]
kernel: package f71882fg hwmon driver

This driver enables hardware monitoring support using the sensors
found in many Fintek Super-IO chips.

Signed-off-by: Nick Bowler <nbowler@draconx.ca>
10 months agoopenssl: revert EOF detection change in 1.1.1
Eneas U de Queiroz [Fri, 27 Mar 2020 02:20:08 +0000 (23:20 -0300)]
openssl: revert EOF detection change in 1.1.1

This adds patches to avoid possible application breakage caused by a
change in behavior introduced in 1.1.1e.  It affects at least nginx,
which logs error messages such as:
nginx[16652]: [crit] 16675#0: *358 SSL_read() failed (SSL: error:
4095126:SSL routines:ssl3_read_n:unexpected eof while reading) while
keepalive, client: xxxx, server: [::]:443

Openssl commits db943f4 (Detect EOF while reading in libssl), and
22623e0 (Teach more BIOs how to handle BIO_CTRL_EOF) changed the
behavior when encountering an EOF in SSL_read().  Previous behavior was
to return SSL_ERROR_SYSCALL, but errno would still be 0.  The commits
being reverted changed it to SSL_ERRO_SSL, and add an error to the
stack, which is correct.  Unfortunately this affects a number of
applications that counted on the old behavior, including nginx.

The reversion was discussed in openssl/openssl#11378, and implemented as
PR openssl/openssl#11400.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
10 months agoar71xx: Fix gigabit switch support for Mikrotik RB951G-2HnD
Baptiste Jonglez [Thu, 26 Mar 2020 18:03:42 +0000 (19:03 +0100)]
ar71xx: Fix gigabit switch support for Mikrotik RB951G-2HnD

Without this patch, when using rev 3 of the Atheros AR9344 SoC, the
gigabit switch (AR8327) does not work or works very erratically.

This is a re-spin of http://patchwork.ozlabs.org/patch/419857/ with a
different PLL value, according to the feedback from several users
(including myself) as shown here:

  https://openwrt.org/toh/mikrotik/rb2011uias#tracking_reported_experience_with_suggested_patch_for_the_5_gige_ports

Performance is acceptable: testing L3 forwarding without NAT yields a
performance of 370 Mbit/s (iperf3 TCP) and 41 Kpps (iperf3 UDP with 64
bytes payload). Both tests show that 100% of CPU time is spent on softirq.

A similar fix for a different device (RB2011) was added in e457d22261
("Make GBit switch work on RB2011").

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
10 months agokernel: bump 5.4 to 5.4.28
Petr Štetiar [Thu, 26 Mar 2020 14:19:42 +0000 (15:19 +0100)]
kernel: bump 5.4 to 5.4.28

Changelog since 5.4.24 mentions CVE-2019-19769, CVE-2020-8648,
CVE-2020-8649 and CVE-2020-8647.

Removed upstreamed:

 generic: 507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch
 generic: 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch
 bcm27xx: 950-0435-ASoC-pcm512x-Fix-unbalanced-regulator-enable-call-in.patch
 ipq806x: 701-stmmac-fix-notifier-registration.patch
 lantiq: 002-pinctrl-falcon-fix-syntax-error.patch
 octeontx: 0002-net-thunderx-workaround-BGX-TX-Underflow-issue.patch

Run tested: apu2, qemu-x86-64, apalis, a64-olinuxino, nbg6617
Build tested: sunxi/a53, imx6, x86/64, ipq40xx

Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> [apu2]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agoipq40xx: switch to 5.4 kernel
Petr Štetiar [Tue, 24 Mar 2020 10:09:41 +0000 (11:09 +0100)]
ipq40xx: switch to 5.4 kernel

5.4.24 seems to be working fine on my zyxel,nbg6617, so let's start
wider userbase testing.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agoipq40xx: wpj428: fix missing MDIO GPIO reset and pinmux
Leon M. George [Mon, 11 Nov 2019 13:10:50 +0000 (14:10 +0100)]
ipq40xx: wpj428: fix missing MDIO GPIO reset and pinmux

The bootloader does not always initialize the MDIO pins before booting
Linux. E.g. on version "U-Boot 2012.07 [Chaos Calmer 15.05.1,r35193] (Jul
25 2017 - 11:36:26)" this is the case when booting automatically without
activating the U-Boot console.

Without this change, the kernel boot will complain about missing PHYs:

 libphy: ipq40xx_mdio: probed
 ar40xx c000000.ess-switch: Probe failed - Missing PHYs!
 libphy: Fixed MDIO Bus: probed

With this change it will work as expected:

 libphy: ipq40xx_mdio: probed
 ESS reset ok!
 ESS reset ok!
 libphy: Fixed MDIO Bus: probed

Ref: GH-2835
Tested-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
Signed-off-by: Leon M. George <leon@georgemail.eu>
[commit description from Fredrik, subject facelift]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agosunxi: switch to 5.4 kernel
Petr Štetiar [Thu, 26 Mar 2020 12:14:32 +0000 (13:14 +0100)]
sunxi: switch to 5.4 kernel

Seems to be working fine on my a64-olinuxino, it's 99.9% upstream stuff
anyway. Lets start wider userbase testing.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agosunxi: a53: fix ethernet on a64-olinuxino
Petr Štetiar [Thu, 26 Mar 2020 12:06:12 +0000 (13:06 +0100)]
sunxi: a53: fix ethernet on a64-olinuxino

a64-olinuxino board has Micrel KSZ9031 Gigabit PHY so add support for
this PHY into kernel.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agosunxi: 5.4: dts: a64: olinuxino: add bank supply regulators
Petr Štetiar [Wed, 18 Mar 2020 23:43:14 +0000 (00:43 +0100)]
sunxi: 5.4: dts: a64: olinuxino: add bank supply regulators

This is backport of v5.6 patch.

Allwinner A64 SoC has separate supplies for PC, PD, PE, PG and PL. This
patch adds regulators for them to the pinctrl node.

Exception is PL which is used by the RSB bus. To avoid circular
dependencies, VCC-PL is omitted.

On boards with eMMC, VCC-PC is supplied by ELDO1, instead of DCDC1.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agosunxi: 5.4: a64-olinuxino: use red LED for status signalization
Petr Štetiar [Thu, 26 Mar 2020 09:13:57 +0000 (10:13 +0100)]
sunxi: 5.4: a64-olinuxino: use red LED for status signalization

There is a red LED marked as `GPIO_LED1` on the silkscreen and connected
to PE17, so use this LED for status signalization.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agosunxi: a53: add support for Olimex A64-Olinuxino eMMC
Petr Štetiar [Mon, 16 Mar 2020 09:57:50 +0000 (10:57 +0100)]
sunxi: a53: add support for Olimex A64-Olinuxino eMMC

Specifications:

 SoC: Allwinner A64 (1.2 GHz Quad-Core ARM Cortex-A53 64-bit)
 RAM: 1GB or 2GB RAM DDR3L @ 672Mhz
 Flash: 0/4/16GB eMMC flash memory for storage and boot
 MicroSD card connector for cards up to 32GB
 Debug: serial UART debug header with 0.1" pins
 Wired connectivity: 10/100/1000Mbps GbE Ethernet
 Wireless connectivity: on-board RTL8723BS 1T1R 802.11bgn WiFi and
                        Bluetooth 4.0 module with built-in antenna
                        (only available in the A64-OLinuXino-1G4GW)

Flashing instructions:

 Standard sunxi SD card installation procedure - copy eMMC image to SD
 card, insert in into SD card slot on the device and boot. You should see
 something like following if the eMMC is detected correctly:

  mmcblk2: mmc2:0001 P1XXXX 3.60 GiB
  mmcblk2boot0: mmc2:0001 P1XXXX partition 1 16.0 MiB
  mmcblk2boot1: mmc2:0001 P1XXXX partition 2 16.0 MiB

 Then flash SD card eMMC image straight into the mmcblk2 device:

  dd if=/mnt/openwrt...a64-olinuxino-emmc-squashfs-sdcard.img of=/dev/mmcblk2

 It also possible to boot from boot0 partition[1]:

  1. Compile U-Boot with CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x40
     otherwise the U-Boot will get stuck in bootloop
  2. Configure eMMC to boot from boot0 partition inside U-Boot:

     mmc bootbus 1 1 0 0; mmc partconf 1 1 1 0

  3. echo 0 > /sys/block/mmcblk2boot0/force_ro
  4. Write U-Boot from offset 0 (not offset 8k as with SD card) into
     boot0 partition

     dd if=u-boot-sunxi-with-spl.bin of=/dev/mmcblk2boot0

Known issues:

 Wireless doesn't work properly via netifd.

1. https://linux-sunxi.org/index.php?title=Bootable_eMMC

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agosunxi: a53: add support for Olimex A64-Olinuxino
Petr Štetiar [Mon, 16 Mar 2020 09:57:50 +0000 (10:57 +0100)]
sunxi: a53: add support for Olimex A64-Olinuxino

Specifications:

 SoC: Allwinner A64 (1.2 GHz Quad-Core ARM Cortex-A53 64-bit)
 RAM: 1GB or 2GB RAM DDR3L @ 672Mhz
 Flash: 0/4/16GB eMMC flash memory for storage and boot
 MicroSD card connector for cards up to 32GB
 Debug: serial UART debug header with 0.1" pins
 Wired connectivity: 10/100/1000Mbps GbE Ethernet
 Wireless connectivity: on-board RTL8723BS 1T1R 802.11bgn WiFi and
                        Bluetooth 4.0 module with built-in antenna
                        (only available in the A64-OLinuXino-1G4GW)

Flashing instructions:

 Standard sunxi SD card installation procedure - copy image to SD card,
 insert in into SD card slot on the device and boot.

Known issues:

 Wireless doesn't work properly via netifd.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agosunxi: a53: image: make it DRY
Petr Štetiar [Mon, 16 Mar 2020 09:56:01 +0000 (10:56 +0100)]
sunxi: a53: image: make it DRY

Replace same copy&pasted lines with the appropriate reusable bits.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agouboot-sunxi: a64: allow booting directly from eMMC
Petr Štetiar [Wed, 18 Mar 2020 14:00:22 +0000 (15:00 +0100)]
uboot-sunxi: a64: allow booting directly from eMMC

Current boot script uses hardcoded bootdevice, which allows booting from
SD card only, so this patch allows booting directly from eMMC as well.
While at it, replace fixed root device with more flexible UUID based
probing, so from now on probing order of MMC device doesn't matter.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agouboot-sunxi: add support for Olimex A64-Olinuxino eMMC
Petr Štetiar [Mon, 16 Mar 2020 14:37:54 +0000 (15:37 +0100)]
uboot-sunxi: add support for Olimex A64-Olinuxino eMMC

Adding U-Boot image for Olimex A64-Olinuxino eMMC, including patch which
adds eMMC boot partition configuration commands.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agouboot-sunxi: add support for Olimex A64-Olinuxino
Petr Štetiar [Mon, 16 Mar 2020 14:37:54 +0000 (15:37 +0100)]
uboot-sunxi: add support for Olimex A64-Olinuxino

Adding U-Boot image for Olimex A64-Olinuxino.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agouboot-sunxi: rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
Petr Štetiar [Wed, 25 Mar 2020 11:55:45 +0000 (12:55 +0100)]
uboot-sunxi: rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3

Rename the board as done in upstream commit 268ae6548779 ("sunxi: Rename
Sinovoip BPI M2 Plus to Bananapi M2 Plus H3") which backs the rename
with the following reasoning:

 The brand Sinovoip is used for Sinovoip's original VOIP products, while
 the Bananapi brand is for the single board computers they produce.  This
 has been verified by Bananapi. Rename the board from "Sinovoip BPI M2
 Plus" to "Bananapi M2 Plus". For the defconfig file, all lowercase is
 used.

 To support the H5 variant of this board, the "H3" suffix is added to
 the defconfig name.

This has to be done in order to allow building U-Boot past v2019.04
release where this change was introduced.

Ref: https://github.com/openwrt/openwrt/pull/2849#discussion_r396401489
Suggested-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agouboot-sunxi: Banana Pi M2 Ultra switch to mainline defconfig
Aleksander Jan Bajkowski [Sun, 9 Feb 2020 17:27:48 +0000 (18:27 +0100)]
uboot-sunxi: Banana Pi M2 Ultra switch to mainline defconfig

U-boot also have defconfig for this board. In 2019.01 branch they are identical.

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
10 months agouboot-sunxi: bump to 2020.01
Petr Štetiar [Mon, 16 Mar 2020 13:47:07 +0000 (14:47 +0100)]
uboot-sunxi: bump to 2020.01

Refreshed patches, removed following, probably obsolete patches:

 221-compatible-old-dtc.patch
 240-sun50i-h5-Orange-Pi-Zero-Plus-Fix-SdCard-detection.patch

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agolinux-firmware: add firmware for RTL8723BS SDIO modules
Petr Štetiar [Wed, 18 Mar 2020 15:51:13 +0000 (16:51 +0100)]
linux-firmware: add firmware for RTL8723BS SDIO modules

Adds firmware package for Realtek RTL8723BS SDIO Wireless LAN NIC driver
available in the staging.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agomac80211: realtek: add staging driver for RTL8723BS SDIO module
Petr Štetiar [Wed, 18 Mar 2020 15:54:03 +0000 (16:54 +0100)]
mac80211: realtek: add staging driver for RTL8723BS SDIO module

Adds kernel module for Realtek RTL8723BS SDIO Wireless LAN NIC driver
available in the staging.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
10 months agobcm27xx: 5.4: add support for Sensirion SPS30 in i2c-sensor overlay
Petr Štetiar [Sun, 8 Mar 2020 21:33:11 +0000 (22:33 +0100)]
bcm27xx: 5.4: add support for Sensirion SPS30 in i2c-sensor overlay

Add support for Sensirion SPS30 particulate matter sensor with fixed
address 0x69.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
11 months agoath79: rename Mikrotik RB 922UAGS-5HPacD mtd partition
Thibaut VARÈNE [Tue, 17 Mar 2020 16:53:44 +0000 (17:53 +0100)]
ath79: rename Mikrotik RB 922UAGS-5HPacD mtd partition

In RouterBOARD parlance there never was an "art" partition.
This partition has always been named 'hard_config' on ar71xx.

This partition contains more than just ART (Atheros Radio Test) data. It
includes the hardware description (product code, serial, board
identifier, name, hardware options, MAC address), as well as other bits
affecting the operation of RouterBoot.
To avoid confusion with regular ART data, this partition is renamed in
line with historical ar71xx and ramips nomenclature as 'hard_config'.

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
[minor commit title/message adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
11 months agoath79: fix Mikrotik wAP G-5HacT2HnD mtd partitions
Thibaut VARÈNE [Tue, 17 Mar 2020 16:53:43 +0000 (17:53 +0100)]
ath79: fix Mikrotik wAP G-5HacT2HnD mtd partitions

In RouterBOARD parlance there never was an "art" partition.
This partition has always been named 'hard_config' on ar71xx.

This partition contains more than just ART (Atheros Radio Test) data. It
includes the hardware description (product code, serial, board
identifier, name, hardware options, MAC address), as well as other bits
affecting the operation of RouterBoot.
To avoid confusion with regular ART data, this partition is renamed in
line with historical ar71xx and ramips nomenclature as 'hard_config'.

This commit fixes the previous support files and implements the nested
RouterBoot partition scheme as already used by ramips-based SPI-NOR
RouterBOARD DTSes, as previously reviewed and implemented in
bbe2cf657ca7 ("ramips: fix RBM11G partitioning").

Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
[minor commit title/message adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
11 months agokirkwood: fix DTS partitions for Pogoplug E02
Alberto Bursi [Fri, 27 Mar 2020 11:21:30 +0000 (12:21 +0100)]
kirkwood: fix DTS partitions for Pogoplug E02

The Pogoplug E02 was not using the correct partitions
in device tree, but used the ones from upstream and
thus could not boot OpenWrt images.

In contrast, uboot-kirkwood is using the correct
partitions since d3fc4fbd74dc ("uboot-kirkwood: re-add
Pogoplug E02 support").

This patch corrects the partitions in DTS for kernels
4.14, 4.19 and 5.4.

Fixes: 2b0fa00da8fc ("kirkwood: add Pogoplug E02 Kernel support")

Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
[commit title/message facelift, refresh 4.14 patch]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
11 months agomediatke: add support for elecom-wrc-2533gent
John Crispin [Fri, 27 Mar 2020 15:13:06 +0000 (16:13 +0100)]
mediatke: add support for elecom-wrc-2533gent

This commit adds support for the MT7622-based Elecom WRC-2533gent router,
with spi-nand storage and 512MB RAM.

The device has the following specifications:

* MT7622 (arm64 dual-core)
* 512MB RAM (DDR3)
* 4GB storage (spi-nand)
* 5x 1Gbps Ethernet (RTL8337C switch)
* 1x UART header
* 1x USB 3.0 port
* 5x LEDs
* 1x reset button
* 1x WPS button
* 1x slider switch
* 1x DC jack for main power (12V)

The following has been tested and is working:
* Ethernet switch
* 2.4g and 5g wifi
* USB 3.0 port
* sysupgrade
* buttons/leds

Not working:
* bluetooth firmware does not load even though it is present int he rootfs

Signed-off-by: John Crispin <john@phrozen.org>
11 months agomediatek: more v5.4 mtd fixes
John Crispin [Fri, 27 Mar 2020 14:34:33 +0000 (15:34 +0100)]
mediatek: more v5.4 mtd fixes

Signed-off-by: John Crispin <john@phrozen.org>
11 months agohostapd: fix no_reload logic
John Crispin [Fri, 27 Mar 2020 11:40:23 +0000 (12:40 +0100)]
hostapd: fix no_reload logic

the code would unconditionally tear down all interfaces upon a reconf.
This should only be done when the reconf call fails.

Signed-off-by: John Crispin <john@phrozen.org>
11 months agomac80211: fix brcmfmac monitor interface crash
Rafał Miłecki [Fri, 27 Mar 2020 13:55:58 +0000 (14:55 +0100)]
mac80211: fix brcmfmac monitor interface crash

This fixes bug in brcmfmac *exposed* by ipv6/addrconf fix.

Fixes: ec8e8e2ef082 ("kernel: backport out-of-memory fix for non-Ethernet devices")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
11 months agoath10k-firmware: update ath10k-ct firmware images
Álvaro Fernández Rojas [Thu, 26 Mar 2020 07:44:43 +0000 (08:44 +0100)]
ath10k-firmware: update ath10k-ct firmware images

Release notes for 017:

Wave-1:

 *  March 19, 2020:  Fix problem where power-save was not enabled when going off-channel to scan.
                     The problem was a boolean logic inversion in the chmgr code, a regression I introduced
                     a long time ago.

 *  March 19, 2020:  When scanning only on current working channel, do not bother with disable/enable
                     powersave.  This should make an on-channel scan less obtrusive than it was previously.

 *  March 23, 2020:  Fix channel-mgr use-after-free problem that caused crashes in some cases.  The crash
                     was exacerbated by recent power-save changes.

 *  March 23, 2020:  Fix station-mode power-save related crash:  backported the fix from 10.2 QCA firmware.

 *  March 23, 2020:  Attempt to better clean up power-save objects and state, especially in station mode.

Release notes for 016:

Wave-1 changes, some debugging code for a crash someone reported, plus:

*  February 28, 2020:  Fix custom-tx path when sending in 0x0 for rate-code.  Have tries == 0 mean
                        one try but NO-ACK (similar to how wave-2 does it).

wave-2:

 * Fixed some long-ago regressions related to powersave and/or multicast.  Maybe fix some
   additional multicast and/or tx-scheduling bugs.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Petr Štetiar <ynezz@true.cz>
11 months agoath10k-ct: update to version 2020-03-25
Álvaro Fernández Rojas [Thu, 19 Mar 2020 10:36:13 +0000 (11:36 +0100)]
ath10k-ct: update to version 2020-03-25

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Petr Štetiar <ynezz@true.cz>
11 months agonetifd: fix compilation with musl 1.2.0
Hans Dedecker [Thu, 26 Mar 2020 20:55:52 +0000 (21:55 +0100)]
netifd: fix compilation with musl 1.2.0

1e8328 system-linux: fix compilation with musl 1.2.0

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
11 months agoodhcp6c: fix compilation with musl 1.2.0
Hans Dedecker [Thu, 26 Mar 2020 20:50:54 +0000 (21:50 +0100)]
odhcp6c: fix compilation with musl 1.2.0

49305e6 odhcp6c: fix compilation with musl 1.2.0

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
11 months agoar71xx: use status led for GL.iNet GL-AR750S
Jan Alexander [Tue, 24 Mar 2020 12:36:57 +0000 (13:36 +0100)]
ar71xx: use status led for GL.iNet GL-AR750S

Use power led for device status.

The status led behavior has already been fixed in af28d8a539fe
("ath79: add support for GL.iNet GL-AR750S") when porting the
device to ath79. This fixes it for ar71xx as well.

Signed-off-by: Jan Alexander <jan@nalx.net>
[minor commit title/message adjustments]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
11 months agoath79: add support for TP-Link TL-WA860RE v1
Adrian Schmutzler [Mon, 9 Dec 2019 14:00:55 +0000 (15:00 +0100)]
ath79: add support for TP-Link TL-WA860RE v1

This ports support for the TL-WA860RE v1 range extender from ar71xx
to ath79.

Specifications:
  Board: AP123 / AR9341 rev. 3
  Flash/RAM: 4/32 MiB
  CPU: 535 MHz
  WiFi: 2.4 GHz b/g/n
  Ethernet: 1 port (100M)
  Two external antennas

Flashing instructions:
  Upload the factory image via the vendor firmware upgrade option.

Recovery:
  Note that this device does not provide TFTP via ethernet like many
  other TP-Link devices do. You will have to open the case if you
  require recovery beyond failsafe.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Sebastian Knapp <sebastian4842@outlook.com>
11 months agoath79: add support for TP-Link TL-WDR4310 v1
Adrian Schmutzler [Mon, 9 Dec 2019 12:44:03 +0000 (13:44 +0100)]
ath79: add support for TP-Link TL-WDR4310 v1

This device seems to be identical to the TL-WDR4300, just with
different release date/region and TPLINK_HWID.

Support is added based on the ar71xx implementation.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
11 months agodnsmasq: fix dnssec+ntp chicken-and-egg workaround (FS#2574)
Henrique de Moraes Holschuh [Sun, 1 Mar 2020 03:08:43 +0000 (00:08 -0300)]
dnsmasq: fix dnssec+ntp chicken-and-egg workaround (FS#2574)

Fix the test for an enabled sysntp initscript in dnsmasq.init, and get
rid of "test -o" while at it.

Issue reproduced on openwrt-19.07 with the help of pool.ntp.br and an
RTC-less ath79 router.  dnssec-no-timecheck would be clearly missing
from /var/etc/dnsmasq.conf.* while the router was still a few days in
the past due to non-working DNSSEC + DNS-based NTP server config.

The fix was tested with the router in the "DNSSEC broken state": it
properly started dnsmasq in dnssec-no-timecheck mode, and eventually ntp
was able to resolve the server name to an IP address, and set the system
time.  DNSSEC was then enabled by SIGINT through the ntp hotplug hook,
as expected.

A missing system.ntp.enabled UCI node is required for the bug to show
up.  The reasons for why it would be missing in the first place were not
investigated.

Signed-off-by: Henrique de Moraes Holschuh <henrique@nic.br>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
11 months agodnsmasq: init: get rid of test -a and test -o
Henrique de Moraes Holschuh [Sun, 1 Mar 2020 02:31:45 +0000 (23:31 -0300)]
dnsmasq: init: get rid of test -a and test -o

Refer to shellcheck SC2166.  There are just too many caveats that are
shell-dependent on test -a and test -o to use them.

Signed-off-by: Henrique de Moraes Holschuh <henrique@nic.br>
11 months agouclient: update mirror hash
Jo-Philipp Wich [Wed, 25 Mar 2020 18:34:34 +0000 (19:34 +0100)]
uclient: update mirror hash

Fixes: 98017228dd ("uclient: bump to latest Git HEAD")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
11 months agouclient: bump to latest Git HEAD
Jo-Philipp Wich [Wed, 25 Mar 2020 18:32:18 +0000 (19:32 +0100)]
uclient: bump to latest Git HEAD

af585db uclient-fetch: support specifying advertised TLS ciphers

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
11 months agouhttpd: bump to latest Git HEAD
Jo-Philipp Wich [Wed, 25 Mar 2020 18:22:10 +0000 (19:22 +0100)]
uhttpd: bump to latest Git HEAD

5e9c23c client: allow keep-alive for POST requests
5fc551d tls: support specifying accepted TLS ciphers

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
11 months agoustream-ssl: bump to latest Git HEAD
Jo-Philipp Wich [Wed, 25 Mar 2020 18:16:19 +0000 (19:16 +0100)]
ustream-ssl: bump to latest Git HEAD

5e1bc34 ustream-openssl: clear error stack before SSL_read/SSL_write
f7f93ad add support for specifying usable ciphers

Also bump the ABI version since the layout of `struct ustream_ssl_ops`
changed.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
11 months agobuild: prereq: tidy gcc version checks
Kevin Darbyshire-Bryant [Tue, 24 Mar 2020 11:05:27 +0000 (11:05 +0000)]
build: prereq: tidy gcc version checks

There is a restriction in the number of parameters(10)  that may be passed to
the SetupHostCommand macro so continually adding explicit gcc'n' version
checks ends up breaking the compiler check for the later versions and
oddballs like Darwin as was done in 835d1c68a0 which added gcc10.

Drop all the explicitly specified gcc version checks.  If a suitable gcc
compiler is not found, it may be specified at the dependency checking
stage after which that version will be symlinked into the build staging
host directory.

eg. 'CC=gccfoo CXX=g++foo make prereq'

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Acked-by: Jo-Philipp Wich <jo@mein.io>
11 months agonftables: bump to 0.9.3
Kevin Darbyshire-Bryant [Tue, 24 Mar 2020 09:51:36 +0000 (09:51 +0000)]
nftables: bump to 0.9.3

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
11 months agolibnftnl: drop unsupported configure option
Kevin Darbyshire-Bryant [Mon, 23 Mar 2020 15:04:51 +0000 (15:04 +0000)]
libnftnl: drop unsupported configure option

--without-json-parsing is not a supported configure option.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
11 months agox86/geode: fixup FEATURE inheritance
Paul Spooren [Mon, 23 Mar 2020 18:53:46 +0000 (08:53 -1000)]
x86/geode: fixup FEATURE inheritance

In the geode subtarget all default x86 features were overwritten via :=
instead of extending them via +=.

This patch fixes the inheritance and thereby the compilation of
x86/geode target.

Compile tested x86/geode.

Signed-off-by: Paul Spooren <mail@aparcar.org>
11 months agox86/geode: add missing include after rebase
Paul Spooren [Mon, 23 Mar 2020 10:25:33 +0000 (00:25 -1000)]
x86/geode: add missing include after rebase

The x86 image generation was refacted via cb007a7bf6 and accidently not
included `geode.mk` when selected as subtarget.

Now the file is included and image compilation for x86/geode works
again.

Thanks to Russell Senior <russell@personaltelco.net> for reporting the
problem and suggesting a patch!

Signed-off-by: Paul Spooren <mail@aparcar.org>
11 months agobcm27xx: refresh linux 5.4 configs
Álvaro Fernández Rojas [Mon, 23 Mar 2020 08:14:36 +0000 (09:14 +0100)]
bcm27xx: refresh linux 5.4 configs

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
11 months agobcm27xx-userland: update to latest version
Álvaro Fernández Rojas [Mon, 23 Mar 2020 08:06:49 +0000 (09:06 +0100)]
bcm27xx-userland: update to latest version

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
11 months agobcm27xx-gpu-fw: update to latest version
Álvaro Fernández Rojas [Mon, 23 Mar 2020 07:55:14 +0000 (08:55 +0100)]
bcm27xx-gpu-fw: update to latest version

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
11 months agobcm27xx: sync 5.4 patches with RPi Foundation
Álvaro Fernández Rojas [Mon, 23 Mar 2020 07:48:08 +0000 (08:48 +0100)]
bcm27xx: sync 5.4 patches with RPi Foundation

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
11 months agobuild: add GCC 10 version detection
Robert Marko [Wed, 18 Mar 2020 18:39:43 +0000 (19:39 +0100)]
build: add GCC 10 version detection

Lets add GCC 10 detection to the build system as distributions like Fedora 32 have started shipping with it.
Some tools like mtd-utils need work to compile under GCC10, but that will be next step.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
11 months agoapm821xx: switch to 5.4 kernel
Christian Lamparter [Sat, 21 Mar 2020 19:56:57 +0000 (20:56 +0100)]
apm821xx: switch to 5.4 kernel

This patch switches the APM821XX target to the linux kernel 5.4 variant.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
11 months agoapm821xx: wndr4700: add preliminary drivetemp sensor
Christian Lamparter [Sat, 21 Mar 2020 20:40:15 +0000 (21:40 +0100)]
apm821xx: wndr4700: add preliminary drivetemp sensor

This patch prepares the WNDR4700 to use the HDD sensor for
the thermal zone. While the kernel's thermal.txt device-tree
binding documentation files talks about supporting multiple
sensors for a zone. This sadly is NOT the case. Even the most
current upstream kernels (5.6-rc) supports just >one< sensor
per zone: (driver/base/of-thermal.c:886)
| * REVIST: for now, the thermal framework supports only
| * one sensor per thermal zone. Thus, we are considering
| * only the first two values as slope and offset.

I do hope that this warning will prevent others wasteing time
on trying to figure out why their multi-sensor thermal-zones
definitions are not working as specified.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
11 months agoapm821xx: add drivetemp sensor for the WD MyBook Series
Christian Lamparter [Sat, 21 Mar 2020 19:58:16 +0000 (20:58 +0100)]
apm821xx: add drivetemp sensor for the WD MyBook Series

This patch adds the hwmon-drivetemp to the device.
It also adds device-tree bindings. This can be useful to
automate external fans which can be controlled for example
by either an unused sata-port or by the usb-power regulator.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
11 months agox86: geode/legacy: fix missing watchdog core dependencies
Christian Lamparter [Sun, 22 Mar 2020 19:39:16 +0000 (20:39 +0100)]
x86: geode/legacy: fix missing watchdog core dependencies

This patch follows the other patches that added the watchdog
core to various (armvirt, malta, ath79, ...) targets that
have been hit by the following build error:

Package kmod-hwmon-sch5627 is missing dependencies for the following libraries:
watchdog.ko

In theory, we could have just added the CONFIG_WATCHDOG_CORE=y
to the Kconfig variable of kmod-hwmon-sch5627's package definition.
This would have forced the watchdog core to be builtin and less
architectures would need to be updated. But we might as well follow
through here.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
11 months agodnsmasq: add 'scriptarp' option
Jordan Sokolic [Thu, 19 Mar 2020 12:23:22 +0000 (14:23 +0200)]
dnsmasq: add 'scriptarp' option

Add option 'scriptarp' to uci dnsmasq config to enable --script-arp functions.
The default setting is false, meaning any scripts in `/etc/hotplug.d/neigh` intended
to be triggered by `/usr/lib/dnsmasq/dhcp-script.sh` will fail to execute.

Also enable --script-arp if has_handlers returns true.

Signed-off-by: Jordan Sokolic <oofnik@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
11 months agoath79: fix missing return statement in ar934x_nand
David Bauer [Sun, 22 Mar 2020 19:06:23 +0000 (20:06 +0100)]
ath79: fix missing return statement in ar934x_nand

The reset assert and deassert methods currently miss
a return value, leading to a compilation warning.

Return the return-value of reset_control_assert and
reset_control_deassert to fix these warnings.

Suggested-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Signed-off-by: David Bauer <mail@david-bauer.net>
11 months agoath79: fix NAND driver compilation for kernel 5.4
David Bauer [Tue, 17 Mar 2020 20:59:27 +0000 (21:59 +0100)]
ath79: fix NAND driver compilation for kernel 5.4

This fixes the compilation of the AR934x NAND controller
driver for kernel 5.4 while leaving it untouched for
kernel 4.19.

This change is currently not run-tested, as i do not have such
a device at hand.

CC: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
CC: André Valentin <avalentin@marcant.net>
CC: WeiDong Jia <jwdsccd@gmail.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Tested-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
11 months agooxnas: yet another irqchip related patch
Daniel Golle [Sun, 22 Mar 2020 13:30:22 +0000 (13:30 +0000)]
oxnas: yet another irqchip related patch

This time DTS fix, again from Sungbo Eo <mans0n@gorani.run>
  ARM: dts: oxnas: Fix clear-mask property

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
11 months agoiwinfo: update to latest Git HEAD
David Bauer [Sun, 22 Mar 2020 00:34:56 +0000 (01:34 +0100)]
iwinfo: update to latest Git HEAD

9f5a7c4 iwinfo: add missing HT modename for HT-None
06a03c9 Revert "iwinfo: add BSS load element to scan result"
9a4bae8 iwinfo: add device id for Qualcomm Atheros QCA9990
eba5a20 iwinfo: add device id for BCM43602
a6914dc iwinfo: add BSS load element to scan result
bb21698 iwinfo: add device id for Atheros AR9287
7483398 iwinfo: add device id for MediaTek MT7615E

Signed-off-by: David Bauer <mail@david-bauer.net>
11 months agoath79: align Ubiquiti AC Pro ethernet map to factory
David Bauer [Thu, 19 Mar 2020 09:33:20 +0000 (10:33 +0100)]
ath79: align Ubiquiti AC Pro ethernet map to factory

The Uniquiti AC Pro and Ubiquiti AC Mesh Pro currently have the
"Primary" and "Secondary" ethernet ports configured to offer LAN as well
as WAN. However, Uiquiti describes the following behavior for the
devices Ethernet ports:

 > Secondary UniFi Access Point (UAP) Ethernet ports don't
 > provide PoE passthrough (to run current to a second powered
 > device), but they do support data passthrough.
 > It serves as a bridged interface between main / secondary
 > Ethernet port.

To reduce confusion for users (as LAN and WAN functionality is not
visible on the device itself), configure both ports to offer LAN
functionality. Users can still configure a WAN interface on a port they
are able to choose.

CC: Lucian Cristian <lucian.cristian@gmail.com>
Reported-by: Florian Klink <flokli@flokli.de>
Signed-off-by: David Bauer <mail@david-bauer.net>
11 months agotools: squashfskit4: fix build with GCC10
Robert Marko [Thu, 19 Mar 2020 11:22:07 +0000 (12:22 +0100)]
tools: squashfskit4: fix build with GCC10

In order to build squashfskit with GCC10, this backport from upstream is needed.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
[increase PKG_RELEASE]
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
11 months agosquashfskit4/Makefile: introduce PKG_RELEASE=1
Alexander Couzens [Sun, 22 Mar 2020 01:03:19 +0000 (02:03 +0100)]
squashfskit4/Makefile: introduce PKG_RELEASE=1

When adding patches, the PKG_RELEASE should be increased.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
11 months agoath79: add support for Ubiquiti NanoBridge M (XM)
Roger Pueyo Centelles [Sun, 15 Mar 2020 17:20:03 +0000 (18:20 +0100)]
ath79: add support for Ubiquiti NanoBridge M (XM)

This patch adds support for the Ubiquiti NanoBridge M (XM), a
802.11n wireless with a feed+dish form factor, with the same board
definition as the Bullet M (XM).

Specifications:
 - Atheros AR7241 SoC
 - 32 MB RAM
 - 8 MB SPI flash
 - 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in
 - Power and LAN green LEDs
 - 4x RSSI LEDs (red, orange, green, green)
 - UART (115200 8N1)

Flashing via stock GUI:
 - WARNING: flashing OpenWrt from AirOS v5.6 or newer will brick your
   device! Read the wiki for more info.
 - Downgrade to AirOS v5.5.x (latest available is 5.5.11) first.
 - Upload the factory image via AirOS web GUI.

Flashing via TFTP:
 - WARNING: flashing OpenWrt from AirOS v5.6 or newer will brick your
   device! Read the wiki for more info.
 - Downgrade to AirOS v5.5.x (latest available is 5.5.11) first.
 - Use a pointy tool (e.g., pen cap, slotted screwdriver) to keep the
   reset button pressed.
 - Power on the device (keep reset button pressed).
 - Keep pressing until LEDs flash alternatively LED1+LED3 =>
   LED2+LED4 => LED1+LED3, etc.
 - Release reset button.
 - The device starts a TFTP server at 192.168.1.20.
 - Set a static IP on the computer (e.g., 192.168.1.21/24).
 - Upload via tftp the factory image:
    $ tftp 192.168.1.20
    tftp> bin
    tftp> trace
    tftp> put openwrt-ath79-generic-xxxxx-ubnt_nanobridge-m-squashfs-factory.bin

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
[rebase, fix includes in DTS, add label MAC address, add SOC and
fix sorting in generic-ubnt.mk]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
11 months agosamba36: log error if getting device info failed
Rafał Miłecki [Mon, 30 Dec 2019 06:54:53 +0000 (07:54 +0100)]
samba36: log error if getting device info failed

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
11 months agobcm53xx: sysupgrade: optimize building UBI image
Rafał Miłecki [Thu, 20 Feb 2020 12:40:55 +0000 (13:40 +0100)]
bcm53xx: sysupgrade: optimize building UBI image

Use "truncate" to adjust size of existing file instead of "dd" which
required creating a copy. This saves space on tmpfs. It may be as low
as 2.1 MiB when using OpenWrt default user space and way more (20+ MiB)
when flashing vendor firmware.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
11 months agobusybox: enable truncate on bcm53xx target
Rafał Miłecki [Thu, 20 Feb 2020 12:40:54 +0000 (13:40 +0100)]
busybox: enable truncate on bcm53xx target

It's needed for optimized sysupgrade. On host machine this change
increased busybox size by 4096 B.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
11 months agotreewide: omit IMAGE_SIZE argument from check-size
Sungbo Eo [Tue, 10 Mar 2020 13:58:27 +0000 (22:58 +0900)]
treewide: omit IMAGE_SIZE argument from check-size

Now that check-size uses IMAGE_SIZE by default, we can skip the argument from
image recipes to reduce redundancy.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[do not touch ar71xx]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
11 months agobuild: image: set default parameter for check-size
Sungbo Eo [Tue, 10 Mar 2020 13:58:00 +0000 (22:58 +0900)]
build: image: set default parameter for check-size

In most cases check-size is used with IMAGE_SIZE and vice versa. Let check-size
use IMAGE_SIZE by default.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
11 months agotreewide: gather DEVICE_VARS into one place
Sungbo Eo [Tue, 10 Mar 2020 06:41:09 +0000 (15:41 +0900)]
treewide: gather DEVICE_VARS into one place

Place DEVICE_VARS assignments at the top of the file or above Device/Default
to make them easier to find.

For ramips, remove redundant values already present in parent file.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[do not touch ar71xx, extend commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>