openwrt/openwrt.git
16 months agokernel: bump 4.14 to 4.14.146
Koen Vandeputte [Tue, 24 Sep 2019 08:58:34 +0000 (10:58 +0200)]
kernel: bump 4.14 to 4.14.146

Refreshed all patches.

Fixes:
- CVE-2019-14814
- CVE-2019-14815
- CVE-2019-14816
- CVE-2019-14821

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agokernel: add disable_eap_hack sysfs attribute
Etienne Champetier [Wed, 4 Sep 2019 17:15:51 +0000 (10:15 -0700)]
kernel: add disable_eap_hack sysfs attribute

We are not sure if 640-bridge-only-accept-EAP-locally.patch is still needed
as a first step, add disable_eap_hack sysfs config to allow to disable it

Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
(cherry picked from commit 7d542dc8047d276517b296132926e722004065e0)

16 months agoopenssl: bump to 1.1.1d
Eneas U de Queiroz [Tue, 17 Sep 2019 13:52:11 +0000 (10:52 -0300)]
openssl: bump to 1.1.1d

This version fixes 3 low-severity vulnerabilities:

- CVE-2019-1547: ECDSA remote timing attack
- CVE-2019-1549: Fork Protection
- CVE-2019-1563: Padding Oracle in PKCS7_dataDecode and
 CMS_decrypt_set1_pkey

Patches were refreshed.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit d868d0a5d7e1d76bb1a8980346d222fae55fa18b)

16 months agoath79: remove invalid uses of ath9k_patch_fw_mac_crc
Adrian Schmutzler [Wed, 18 Sep 2019 15:11:06 +0000 (17:11 +0200)]
ath79: remove invalid uses of ath9k_patch_fw_mac_crc

Some ar9344-based devices are using ath9k_patch_fw_mac_crc, which
is meant to generate a checksum, for fixing their ath9k MAC
addresses.
However, those do not have a checksum field, and the calculated
checksum offset would be negative.

This patch will use ath9k_patch_fw_mac function for those devices.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit f8d8b3f85d70a85d4fabc9b8ed4dbc8020be0523)

16 months agohostapd: Fix AP mode PMF disconnection protection bypass
Hauke Mehrtens [Fri, 20 Sep 2019 20:20:16 +0000 (22:20 +0200)]
hostapd: Fix AP mode PMF disconnection protection bypass

This fixes
* CVE-2019-16275 AP mode PMF disconnection protection bypass
https://w1.fi/security/2019-7/ap-mode-pmf-disconnection-protection-bypass.txt

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit a6981604b30bc1ddc1713b368fe853d89c2ba40d)

16 months agouClibc++: Remove faulty patch
Rosen Penev [Fri, 20 Sep 2019 00:39:15 +0000 (17:39 -0700)]
uClibc++: Remove faulty patch

This patch was originally added to fix compilation with v4l2rtspserver.
Turns out it was v4l2rtspserver that was broken, not uClibc++. This now
causes issues with a different package where the arguments are being
split.

Note that with this patch, shellcheck throws an error:

SC2068: Double quote array expansions to avoid re-splitting elements.

More: https://github.com/openwrt/packages/pull/9972#discussion_r324878373

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 977a8fc5fc2e1be6d159b2d9e1c617826b5d9701)

16 months agombedtls: update to 2.16.3
Magnus Kroken [Wed, 18 Sep 2019 19:22:16 +0000 (21:22 +0200)]
mbedtls: update to 2.16.3

Remove 300-bn_mul.h-Use-optimized-MULADDC-code-only-on-ARM-6.patch,
the issue has been fixed upstream.

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
(cherry picked from commit 49d96ffc5c47e40b7f3d99a91a42ea8a54a38bd9)

16 months agoltq-vdsl-fw: update firmware filename and download URL
Daniel Golle [Sat, 21 Sep 2019 13:09:55 +0000 (15:09 +0200)]
ltq-vdsl-fw: update firmware filename and download URL

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 4fc0a61ed3da96330d30703a2a039a6a06dc0b2f)

16 months agokernel: add module for Emulex OneConnect 10Gbit
Alberto Bursi [Sun, 15 Sep 2019 22:54:20 +0000 (00:54 +0200)]
kernel: add module for Emulex OneConnect 10Gbit

add module to support Emulex OneConnect
common in 10Gbit SFP+ cards by Dell/HP/IBM
supports OneConnect OCe10xxx OCe11xxx OCe14xxx,
LightPulse LPe12xxx

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
(cherry picked from commit 827f47749b75dcc6b650297b9303c27127b15201)

16 months agokernel: bump 4.14 to 4.14.145
Koen Vandeputte [Fri, 20 Sep 2019 13:09:15 +0000 (15:09 +0200)]
kernel: bump 4.14 to 4.14.145

Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agokernel: bump 4.14 to 4.14.144
Koen Vandeputte [Wed, 18 Sep 2019 13:04:48 +0000 (15:04 +0200)]
kernel: bump 4.14 to 4.14.144

Refreshed all patches.

Altered patches:
- 816-pcie-support-layerscape.patch

Fixes:
- CVE-2019-15030

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agoprocd: fix invalid JSON filter expression in procd_running()
Jo-Philipp Wich [Thu, 19 Sep 2019 05:16:49 +0000 (07:16 +0200)]
procd: fix invalid JSON filter expression in procd_running()

Since service and instance names may contain characters which are not allowed
in JSON path labels, such as dashes or spaces, change the filter expression
to array square bracket notation to properly match these cases as well.

Fixes: 2c3dd70741 ("procd: add procd_running() helper for checking running state")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit c933b6d22478c1113629ef549beea6337f978d62)

16 months agofirewall: update to latest Git HEAD
Jo-Philipp Wich [Wed, 18 Sep 2019 09:01:29 +0000 (11:01 +0200)]
firewall: update to latest Git HEAD

383eb58 ubus: do not overwrite ipset name attribute
c26f890 firewall3: fix typo that affects ICMPv6 rules with numeric icmp_type
487bd0d utils: Fix string format message
4d0c703 firewall3: Fix some format string problems
8c404ef iptables.c: lock the xtables.lock
c1d3a4d utils: implement fw3_lock_path() & fw3_unlock_path()

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
[cherry picked and squashed from commits
 7db655991443a98f84e4c39e733232d41d2d6137,
 359bff605244c2cf2bff75bce0f0b16b496a6a77,
 2cf209ce9166575d8259b5b4176ee91d8b48d2ff,
 5ef9e4f107a94c502908403fdf56cf6bcdc08dd2]
Ref: https://forum.openwrt.org/t/fw3-ipset-procd-objects/44044
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
16 months agoprocd: update to the latest git HEAD
Rafał Miłecki [Wed, 18 Sep 2019 05:33:01 +0000 (07:33 +0200)]
procd: update to the latest git HEAD

62dc8c0 system: sysupgrade: send reply on error
2710c65 system: refuse sysupgrade with backup if it's unsupported

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 04e912d21720b2d906d84aaf172af79a25076a41)

16 months agoramips: add factory image for NETGEAR R6220
David Bauer [Tue, 27 Aug 2019 21:55:12 +0000 (23:55 +0200)]
ramips: add factory image for NETGEAR R6220

This adds an easy-installation factory image for the NETGEAR R6220
router. The factory image can either be flashed via the vendor Web-UI or
the bootloader using nmrpflash.

Tested with NETGEAR V1.1.0.86 firmware.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 607dfdf211bebb5043cbc0267c1e2c3e3c2514b4)

16 months agobrcm47xx: sysupgrade: support Luxul firmware format
Dan Haab [Mon, 16 Sep 2019 15:18:37 +0000 (09:18 -0600)]
brcm47xx: sysupgrade: support Luxul firmware format

Allow flashing Luxul devices using vendor firmware format.

Signed-off-by: Dan Haab <dan.haab@legrand.com>
(cherry picked from commit 95240c4933607544ad1788c2ed19843dd96bccbb)

16 months agobcm53xx: sysupgrade: support Luxul firmware format
Dan Haab [Thu, 12 Sep 2019 17:14:19 +0000 (11:14 -0600)]
bcm53xx: sysupgrade: support Luxul firmware format

Allow flashing Luxul devices using vendor firmware format. The next step
will be building proper images once they are conirmed to work.

Signed-off-by: Dan Haab <dan.haab@legrand.com>
(cherry picked from commit bc5db7364d1e00be5bbe5444e81c40571fbd696d)

16 months agomac80211: brcmfmac: backport the last 5.4 changes
Rafał Miłecki [Mon, 16 Sep 2019 06:04:27 +0000 (08:04 +0200)]
mac80211: brcmfmac: backport the last 5.4 changes

This makes brcmfmac use the same wiphy after PCIe reset to help user
space handle corner cases (e.g. firmware crash).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit f39f4b2f6d4300995270f635261b07197e8cf61e)

16 months agoar71xx: fix typo in platform_do_upgrade_compex()
Rafał Miłecki [Mon, 16 Sep 2019 04:59:09 +0000 (06:59 +0200)]
ar71xx: fix typo in platform_do_upgrade_compex()

Fixes: a71742882855 ("treewide: use new procd sysupgrade $UPGRADE_BACKUP variable")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 63d611390c4d34a838e744e278529f30f9d2cc20)

16 months agotreewide: sysupgrade: use $UPGRADE_BACKUP to check for backup
Rafał Miłecki [Fri, 6 Sep 2019 05:10:54 +0000 (07:10 +0200)]
treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup

Now that $UPGRADE_BACKUP is set conditionally there is no need to check
the $UPGRADE_OPT_SAVE_CONFIG anymore. All conditions can be simplified.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit a858db313687ddfa6ed1ddba76bd74844a7b89dc)

16 months agoprocd: update to the latest git HEAD
Rafał Miłecki [Wed, 11 Sep 2019 07:03:36 +0000 (09:03 +0200)]
procd: update to the latest git HEAD

b8238df sysupgrade: support "backup" attribute

This update requires "sysupgrade" method callers to pass "backup"
attribute if $UPGRADE_BACKUP is used in the project.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 9785a9121d2d7a0a25bcd2924ee78fafada056da)

16 months agobase-files: sysupgrade: pass "backup" ubus attribute
Rafał Miłecki [Fri, 6 Sep 2019 05:10:52 +0000 (07:10 +0200)]
base-files: sysupgrade: pass "backup" ubus attribute

This explicitly tells procd what backup file should be used during
sysupgrade (if any). It's much more generic this way compared to the
magic /tmp/sysupgrade.tgz file that had to be created before a call.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit c5223b26a40ae61fc7750bf865464048af328ab1)

16 months agoodhcpd: retry failed PD assignments on addrlist change
Hans Dedecker [Sun, 15 Sep 2019 18:49:34 +0000 (20:49 +0200)]
odhcpd: retry failed PD assignments on addrlist change

88d9ab6 dhcpv6: retry failed PD assignments on addrlist change

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
16 months agoscripts/feeds: fix accepting "-" in feed type string
Felix Fietkau [Sun, 15 Sep 2019 17:53:17 +0000 (19:53 +0200)]
scripts/feeds: fix accepting "-" in feed type string

Fixes a syntax error in processing the type src-git-full

Signed-off-by: Felix Fietkau <nbd@nbd.name>
16 months agoath79: fix UniFi AC LED mapping
David Bauer [Fri, 6 Sep 2019 22:43:19 +0000 (00:43 +0200)]
ath79: fix UniFi AC LED mapping

The UniFi AC LED mapping is currently off. The blue/white LED are used
as WiFi indicators, while the vendor firmware does not feature WiFI
LEDs.

Instead, the LEDs are used to indicate the devices status. Align the LED
mapping to match the vendor firmware as good as possible.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 18fa749df8bd9fe292c93f60ddd3fb963a78274a)

16 months agoiwinfo: update to latest Git HEAD
David Bauer [Sun, 8 Sep 2019 13:48:43 +0000 (15:48 +0200)]
iwinfo: update to latest Git HEAD

a88fb42 iwinfo: add device id for Qualcomm Atheros QCA9886
1b69d86 iwinfo: add device id for Qualcomm Atheros QCA9887

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 7db2f1a71f202023154e80758079193fc47352eb)

16 months agoar71xx: make IRQ fixes target specific
Koen Vandeputte [Sat, 14 Sep 2019 14:28:40 +0000 (16:28 +0200)]
ar71xx: make IRQ fixes target specific

Move the IRQ fix from generic to ar71xx specific.
Other targets like ath79 have specific pathes to delete this code.
This resulted in a build failure on ath79

Fixes: 00d48bcac08a ("ar71xx: Fix potentially missed IRQ handling during
dispatch")

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agoar71xx: fix potential IRQ misses during dispatch for qca953x
Koen Vandeputte [Wed, 11 Sep 2019 10:47:27 +0000 (12:47 +0200)]
ar71xx: fix potential IRQ misses during dispatch for qca953x

If both interrupts are set in the current implementation
only the 1st will be handled and the 2nd will be skipped
due to the "if else" condition.

Fix this by using the same approach as done for QCA955x
just below it.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit 9e8c36557cc0582986862f5a36e17adf6db2b90e)

16 months agoar71xx: Fix potentially missed IRQ handling during dispatch
Koen Vandeputte [Wed, 11 Sep 2019 10:28:36 +0000 (12:28 +0200)]
ar71xx: Fix potentially missed IRQ handling during dispatch

If both interrupts are set in the current implementation
only the 1st will be handled and the 2nd will be skipped
due to the "if else" condition.

Fix this by using the same approach as done for QCA955x
just below it.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agokernel: bump 4.14 to 4.14.143
Koen Vandeputte [Wed, 11 Sep 2019 09:22:19 +0000 (11:22 +0200)]
kernel: bump 4.14 to 4.14.143

Refreshed all patches.

Remove upstreamed:
- 390-v5.3-net-sched-fix-action-ipt-crash.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agobase-files: validate firmware for compatibility with backup
Rafał Miłecki [Thu, 5 Sep 2019 11:08:13 +0000 (13:08 +0200)]
base-files: validate firmware for compatibility with backup

This allows platform code to check if firmware image can be used with
preserving a backup. It may be used e.g. when installing vendor
firmwares that won't restore appended backup archive.

Suggested-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 1c510fe2980cd787602786e82f44602549d607d4)

16 months agobcm53xx: extend firmware validation
Rafał Miłecki [Fri, 6 Sep 2019 10:44:49 +0000 (12:44 +0200)]
bcm53xx: extend firmware validation

This provides TRX validation result to the validation JSON. It also
prevents users from installing broken firmware files.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit c19b9f9a2623c110222210d04f75ace0e594c7e9)

16 months agobrcm47xx: extend firmware validation
Rafał Miłecki [Wed, 4 Sep 2019 04:35:31 +0000 (06:35 +0200)]
brcm47xx: extend firmware validation

This provides TRX validation result, so final JSON may look like:
{
"tests": {
"fwtool_signature": true,
"fwtool_device_match": true,
"trx_valid": true
},
"valid": true,
"forceable": true
}

It also prevents users from installing broken firmware files, e.g.:

root@OpenWrt:/# sysupgrade -F -n /tmp/TZ
Image metadata not found
Invalid image type. Please use firmware specific for this device.
Image check failed but --force given - will update anyway!
Commencing upgrade. Closing all shell sessions.
Firmware image is broken and cannot be installed

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit e68c1cebd1d87ce60f0646688e437e83081e2322)

16 months agotreewide: use new procd sysupgrade $UPGRADE_BACKUP variable
Rafał Miłecki [Thu, 5 Sep 2019 21:33:19 +0000 (23:33 +0200)]
treewide: use new procd sysupgrade $UPGRADE_BACKUP variable

It's a variable set by procd that should replace hardcoded
/tmp/sysupgrade.tgz.

This change requires the most recent procd with the commit 0f3c136
("sysupgrade: set UPGRADE_BACKUP env variable").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 641f6b6c26cb9ab5e1198810015e5f4b2b5b34ad)

16 months agotreewide: when copying a backup file always specify dest name
Rafał Miłecki [Wed, 4 Sep 2019 14:57:40 +0000 (16:57 +0200)]
treewide: when copying a backup file always specify dest name

$CONF_TAR shouldn't be assumed to always point to the sysupgrade.tgz.
This change makes code more generic and allows refactoring $CONF_TAR.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 62dbe361a1b1ed1506bc0387bff55eddcb619e49)

16 months agotreewide: don't hardcode "sysupgrade.tgz" file name
Rafał Miłecki [Wed, 4 Sep 2019 14:57:39 +0000 (16:57 +0200)]
treewide: don't hardcode "sysupgrade.tgz" file name

1) Add BACKUP_FILE and use it when copying an archive to be restored
   after sysupgrade (on the next preinit).
2) Use CONF_TAR for copying backup prepared by the /sbin/sysupgrade

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit bf390478727ac5f4f9d6fb684de48b8150bcec67)

16 months agotools: mkimage: fix __u64 typedef conflict with new glibc
Yousong Zhou [Wed, 11 Sep 2019 13:25:17 +0000 (13:25 +0000)]
tools: mkimage: fix __u64 typedef conflict with new glibc

Including "sys/stat.h" from newer glibc will cause __u64 from linux uapi
header to be included, causing compilation failure for u-boot tools
USE_HOSTCC

Remove typedef for __u64 in include/compiler.h to fix the issue.  It should be
safe because as of u-boot-2018.03, no ref to __u64 is found under u-boot tools/
directory

Error message snippet follows

  HOSTCC  tools/mkenvimage.o
In file included from /usr/include/asm-generic/types.h:7,
 from /usr/include/asm/types.h:5,
 from /usr/include/linux/types.h:5,
 from /usr/include/linux/stat.h:5,
 from /usr/include/bits/statx.h:30,
 from /usr/include/sys/stat.h:446,
 from tools/mkenvimage.c:21:
/usr/include/asm-generic/int-ll64.h:31:42: error: conflicting types for '__u64'
   31 | __extension__ typedef unsigned long long __u64;
      |                                          ^~~~~
In file included from <command-line>:
././include/compiler.h:69:18: note: previous declaration of '__u64' was here
   69 | typedef uint64_t __u64;
      |                  ^~~~~
make[5]: *** [scripts/Makefile.host:116: tools/mkenvimage.o] Error 1

Ref: https://forum.openwrt.org/t/compile-error-19-07/44423
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1699194
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
16 months agoRevert "ar71xx: use platform code for qca955x usb0 init"
Koen Vandeputte [Wed, 11 Sep 2019 21:40:42 +0000 (23:40 +0200)]
Revert "ar71xx: use platform code for qca955x usb0 init"

This reverts commit af91a370de2b94a37b8a87a9f95503e96dfcb744.

As Piotr Dymacz pointed out:

In QCA MIPS based WiSOCs, for first USB interface,
device/host mode can be selected _only_ in hardware
see description of 57c641ba6e

QCA955x and QCA9563, second USB can be switched to device
mode in software (tested and confirmed on real hardware).

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agoar71xx: qca955x pci init/reset fixes
Tomislav Požega [Tue, 3 Sep 2019 22:48:37 +0000 (00:48 +0200)]
ar71xx: qca955x pci init/reset fixes

Current ar724x code does the reset only on single pci bus, and
in case of qca9558 writes the wrong register (0x10 vs 0x0c).
This change allows the reset of second pci bus, commonly used in
Archer C7 devices, in case host controller is stuck in reset.
If the resetting controller on boot can solve any other issue it
can be enabled unconditionally by removing reset check before
ar724x_pci_hw_init is called.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
[refreshed to apply cleanly]
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit 76d870871cb12fc0c170e5fd23bce568adfaae6d)

16 months agoar71xx: enable ddr wb flush on qca955x
Tomislav Požega [Tue, 3 Sep 2019 15:10:31 +0000 (17:10 +0200)]
ar71xx: enable ddr wb flush on qca955x

Enable flushing of write buffers on qca955x. GPL code has 0x88 reg
defined for PCI flush which is likely an error since the device
freezes on boot. So use DS default value 0xA8 for PCI flush.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
(cherry picked from commit fe9e702dc94ece2a004f6db68d6fb9a94d9437cb)

16 months agoar71xx: use platform code for qca955x usb0 init
Tomislav Požega [Tue, 3 Sep 2019 15:04:17 +0000 (17:04 +0200)]
ar71xx: use platform code for qca955x usb0 init

Switch from ci_usb_setup to generic platform initialization of
usb0 port.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
(cherry picked from commit 36a0cfd24be1cb79f221964ed2bfe12b98befff3)

16 months agokernel: bump 4.14 to 4.4.142
Koen Vandeputte [Mon, 9 Sep 2019 10:42:26 +0000 (12:42 +0200)]
kernel: bump 4.14 to 4.4.142

Refreshed all patches.

Remove upstreamed:
- 0032-usb-host-fotg2-restart-hcd-after-port-reset.patch

Compile-tested on: ar71xx, cns3xxx, imx6, x86_64
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
16 months agohostapd: SAE/EAP-pwd side-channel attack update
Hauke Mehrtens [Sun, 8 Sep 2019 21:53:18 +0000 (23:53 +0200)]
hostapd: SAE/EAP-pwd side-channel attack update

Fixes this security problem:
* SAE/EAP-pwd side-channel attack update
https://w1.fi/security/2019-6/sae-eap-pwd-side-channel-attack-update.txt

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 7bed9bf10fc8d05df34c7efc66e8b4ade37a1a0c)

16 months agohostapd: Fix security problem in EAP-pwd
Hauke Mehrtens [Sun, 8 Sep 2019 21:27:04 +0000 (23:27 +0200)]
hostapd: Fix security problem in EAP-pwd

This fixes:
CVE-2019-11555 "EAP-pwd message reassembly issue with unexpected fragment"
https://w1.fi/security/2019-5/eap-pwd-message-reassembly-issue-with-unexpected-fragment.txt

This should not affect OpenWrt in the default settings as we do not use
EAP-pwd.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 9f34bf51d60a237696b1d4cc9b5f4835b95e7ea2)

16 months agoramips: fix ethernet MAC address of ASUS RT-AC57U
Adrian Schmutzler [Sat, 7 Sep 2019 15:05:35 +0000 (17:05 +0200)]
ramips: fix ethernet MAC address of ASUS RT-AC57U

This backports the only non-cosmetic fix from 6640e1c3681b
("ramips: clean and improve MAC address setup in 02_network").

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
16 months agoramips: fix duplicate network setup for dlink, dir-615-h1
Adrian Schmutzler [Sat, 7 Sep 2019 15:05:34 +0000 (17:05 +0200)]
ramips: fix duplicate network setup for dlink, dir-615-h1

In 555ca422d1cb ("ramips: fix D-Link DIR-615 H1 switch port
mapping"), port setup for dir-615-h1 was changed without removing
the old one. This was working as the new one was triggered earlier
than the old one.

(In the meantine, changed sorting during ramips rename patches
actually inversed that order.)

Anyway, just remove the wrong case now.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit e35e4a996e26f17b69d200505ecea78af96a2704)

16 months agoramips: remove duplicate case for MAC setup of freestation5
Adrian Schmutzler [Sat, 7 Sep 2019 15:05:33 +0000 (17:05 +0200)]
ramips: remove duplicate case for MAC setup of freestation5

ARC FreeStation5 is present twice in MAC address setup.

>From older commits/changes, it is not possible to reconstruct
the correct choice only by reading the annotations.

Thus, remove the second case and keep the first one, so behavior
stays the same (as nobody seems to have complained about it).

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
(cherry picked from commit ad4eb2241b33b05b0942a3fa7ed2e53fb6e84386)

16 months agomac80211: brcmfmac: backport more kernel 5.4 changes
Rafał Miłecki [Mon, 9 Sep 2019 07:37:53 +0000 (09:37 +0200)]
mac80211: brcmfmac: backport more kernel 5.4 changes

Patch getting RAM info got upstreamed. A debugging fs entry for testing
reset feature was added.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 681acdcc54d2e59135bb706c38bed942f74ccf74)

16 months agomt7620: disable image generation for Nexx WT3020 (4MB)
Hauke Mehrtens [Sun, 8 Sep 2019 19:08:22 +0000 (21:08 +0200)]
mt7620: disable image generation for Nexx WT3020 (4MB)

Image generation is currently failing on builbots due to the following
error:

WARNING: Image file openwrt-19.07-snapshot-r10495-db5164d3d0-ramips-mt7620-wt3020-4M-squashfs-factory.bin is too big

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
16 months agoapm821xx: Make patches apply again
Hauke Mehrtens [Sun, 8 Sep 2019 17:43:50 +0000 (19:43 +0200)]
apm821xx: Make patches apply again

This patch was applied to the upstream kernel in version 4.14.135,
remove it from our patches directory.

Fixes: 40379b0ec64d ("apm821xx: fix bogus key-presses on boot")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
16 months agoRevert "build: remove harmful -nopad option from mksquashfs"
Jonas Gorski [Fri, 6 Sep 2019 12:55:36 +0000 (14:55 +0200)]
Revert "build: remove harmful -nopad option from mksquashfs"

This reverts commit 1c0290c5cc6258c48b8ba46b4f9c85a21de4f875.

Dropping the nopad can make the padding overflow into the next erase
block on devices using a non-aligned rootfs start. This breaks the jffs2
overlay partition with the following messages:

[   30.343877] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
[   30.376512] jffs2: Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
[   30.385253] jffs2: empty_blocks 196, bad_blocks 0, c->nr_blocks 197

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
(cherry picked from commit f11d90a76b719106336b94d85b166b4ebf19dbb0)

16 months agoipq40xx: fix AVM NAND caldata extraction
David Bauer [Mon, 12 Aug 2019 23:44:03 +0000 (01:44 +0200)]
ipq40xx: fix AVM NAND caldata extraction

The AVM Fritz!Box 7530 (and probably other AVM IPQ4019 NAND devices)
has it's caldata not stored consistently, but instead at currently
3 known possible offsets.

As we get a non-zero exit code from fritz_cal_extract, simply try all
three possible offsets on both bootloader partitions, until a matching
caldata for each radio is found.

Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit a6f85b81b7efd3fa3265d70e5406275b2dc03f5f)

16 months agokernel: net_sched: fix a NULL pointer deref in ipt action
Cong Wang [Sun, 25 Aug 2019 12:35:06 +0000 (05:35 -0700)]
kernel: net_sched: fix a NULL pointer deref in ipt action

The net pointer in struct xt_tgdtor_param is not explicitly
initialized therefore is still NULL when dereferencing it.
So we have to find a way to pass the correct net pointer to
ipt_destroy_target().

The best way I find is just saving the net pointer inside the per
netns struct tcf_idrinfo, which could make this patch smaller.

Fixes: 0c66dc1ea3f0 ("netfilter: conntrack: register hooks in netns when needed by ruleset")
Reported-and-tested-by: Tony Ambardar <itugrok@xxxxxxxxx>
Cc: Jamal Hadi Salim <jhs@xxxxxxxxxxxx>
Cc: Jiri Pirko <jiri@xxxxxxxxxxx>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
[Backport for kernel v4.19 and v4.14]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204681]
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
(cherry picked from commit 7735cce0c5c306bd9eea20ca2805e4a492c02be9)

16 months agomvebu: sysupgrade: don't use $ARGV in platform_check_image()
Rafał Miłecki [Sun, 14 Jul 2019 16:59:59 +0000 (18:59 +0200)]
mvebu: sysupgrade: don't use $ARGV in platform_check_image()

sysupgrade passes image path to platform_check_image() as an argument so
it can be simply accessed using $1

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 76e43c82b55518b794ac24f9acfb3888c638f99b)
[rmilecki: dropping ARGV without this change broke sysupgrade]
Fixes: 6ac62c4b6cae ("base-files: don't set ARGV and ARGC")

16 months agotreewide: sysupgrade: don't use $ARGV in platform_do_upgrade()
Rafał Miłecki [Sun, 14 Jul 2019 17:03:19 +0000 (19:03 +0200)]
treewide: sysupgrade: don't use $ARGV in platform_do_upgrade()

stage2 passes image path to platform_do_upgrade() as an argument so it
can be simply accessed using $1

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 8b4bc7abe073489a3595eeb2d81818852319c148)
[rmilecki: dropping ARGV without this change broke sysupgrade]
Fixes: 6ac62c4b6cae ("base-files: don't set ARGV and ARGC")

16 months agoodhcp6c: update to latest git HEAD
Hans Dedecker [Sat, 7 Sep 2019 11:08:27 +0000 (13:08 +0200)]
odhcp6c: update to latest git HEAD

e199804 dhcpv6: sanitize oro options

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit 1855c237948e211849d79765ca749cdea6a79987)

16 months agoath79: correct OCEDO Ursus phy-mode property
David Bauer [Sat, 31 Aug 2019 14:47:31 +0000 (16:47 +0200)]
ath79: correct OCEDO Ursus phy-mode property

This fixes the previously incorrect phy-mode for the OCEDO Ursus GMAC0.

See 62abbd587dc9 ("ath79: correct various phy-mode properties")
for more details.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 7b137e9df920926dbd92f12450d9955c2759c92b)

16 months agoramips: fix network setup for various NETGEAR boards
David Bauer [Fri, 30 Aug 2019 20:41:18 +0000 (22:41 +0200)]
ramips: fix network setup for various NETGEAR boards

There are currently the following issues present for the Netgear R6220,
R6350 and WNDR3700 v5:

 - LAN and WAN MAC-addresses are inverted
 - WAN MAC-address is off. It are +2 compared to the LAN MAC-address
   (R6350 only)
 - Switchport order is inverted in LuCi

This commit fixes both these issues by assigning correct MAC-addresses
to LAN and WAN interfaces and defining the switchports with the correct
labels.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 13937a16d40693df67d3d39faa3a80644bdb7abf)

16 months agoramips: use phy trigger for various Netgear boards
David Bauer [Fri, 30 Aug 2019 18:11:45 +0000 (20:11 +0200)]
ramips: use phy trigger for various Netgear boards

This commit switches the default trigger for the WiFi LED from a netdev
trigger on "wlan0" to a wireless-phy based trigger. THis allows the LED
to work, even when the wireless interface is not named "wlan0" without
modifiying the LED settings.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit fa46c9b208fe3833f085e9f6ddf7c492b16f6c34)

16 months agoramips: disable badblock shifting for MT7621 NAND
David Bauer [Wed, 28 Aug 2019 21:40:51 +0000 (23:40 +0200)]
ramips: disable badblock shifting for MT7621 NAND

The MediaTek MT7621 NAND driver currently intransparently shifts NAND
pages when a block is marked as bad. Because of this, offsets for e.g.
caldata and MAC-addresses seem to be off.

This is, howeer, not a task for the mtd NAND driver, as the flash
translation layer is tasked with this.

This patch disables this badblock shifting. This fix was originally
proposed by Jo-Philipp Wich at
https://bugs.openwrt.org/index.php?do=details&task_id=1926

Fixes FS#1926 ("MTD partition offset not correctly mapped when bad
eraseblocks present")
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit 527832e54bf3bc4d699a145ae66f34230246f0a9)

16 months agotreewide: fix invalid UPGRADE_OPT_SAVE_CONFIG spellings
Rafał Miłecki [Thu, 5 Sep 2019 06:53:44 +0000 (08:53 +0200)]
treewide: fix invalid UPGRADE_OPT_SAVE_CONFIG spellings

That was a result of accidentally running "sed" twice on some files.

Fixes: 9b9412d55cca ("treewide: replace remaining (not working now) $SAVE_CONFIG uses")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 1078de96e315f3cc2675b2c5935009e8c6159ad4)

16 months agotreewide: replace remaining (not working now) $SAVE_CONFIG uses
Rafał Miłecki [Thu, 5 Sep 2019 06:40:29 +0000 (08:40 +0200)]
treewide: replace remaining (not working now) $SAVE_CONFIG uses

This var has been replaced by the $UPGRADE_OPT_UPGRADE_OPT_SAVE_CONFIG

Fixes: f25d164aca80 ("base-files: pass "save_config" option to the "sysupgrade" method")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 5797fe84a3b508483f7d82e177157c1bf2f342d9)

16 months agoprocd: update to the latest git HEAD
Rafał Miłecki [Thu, 5 Sep 2019 21:16:17 +0000 (23:16 +0200)]
procd: update to the latest git HEAD

0f3c136 sysupgrade: set UPGRADE_BACKUP env variable
0bcbbbf system: fix uninitialized variables in firmware validation code

This update includes a fix for uninitialized variable usage.

Fixes: db5164d3d056 ("procd: update to the latest git HEAD")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit e8dcbbc865cb6acef1cfbafe77f30c1f003c3dc3)

16 months agoprocd: update to the latest git HEAD
Rafał Miłecki [Wed, 4 Sep 2019 09:12:44 +0000 (11:12 +0200)]
procd: update to the latest git HEAD

34ac88c system: reject sysupgrade of invalid firmware images by default
f55c235 system: reject sysupgrade of broken firmware images
e990e21 system: add "validate_firmware_image" ubus method

This update changes "sysupgrade" ubus method API. It's now required to
pass "force" attribute whenever invalid firmware is meant to be
installed.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 7290963d0992b9aa412e0066dcf721857fbd40f7)

16 months agobase-files: pass "force" parameter to the "sysupgrade" call
Rafał Miłecki [Tue, 3 Sep 2019 12:44:40 +0000 (14:44 +0200)]
base-files: pass "force" parameter to the "sysupgrade" call

This makes sysupgrade work with the most recent procd that validates
firmware before proceeding.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit b71962da16c2e2b93d633d7bde1436b3da2bf740)

16 months agoupslug2: Update to git repository
Rosen Penev [Thu, 8 Aug 2019 22:57:56 +0000 (15:57 -0700)]
upslug2: Update to git repository

This has two improvements over the current version. An autotools fix and
application of the wrt350v2 patch.

Cleaned up Makefile as a result of makefiles being fixed.

Note that this package is not really used as it depends on orion, which is
classified as broken.

This is the last package that uses svn in the tree.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit ac31ec0f62af31cdbc348911503bae8c152f8516)

16 months agosdk: use bundle-libraries.sh to ship kernel objtool tools
Jo-Philipp Wich [Fri, 30 Aug 2019 13:45:06 +0000 (15:45 +0200)]
sdk: use bundle-libraries.sh to ship kernel objtool tools

Ensure that the kernel objtool utilities are processed by the library
bundler in order to ensure that they're usable on foreign systems with
different libc versions.

Fixes: a9f6fceb42 ("sdk: fix building external modules when CONFIG_STACK_VALIDATION=y")
Acked-by: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit efaaadb49e90b51ba3a6adc6fafc330c23b8f764)

16 months agoinclude: kernel-build: pass pkg-config overrides to kernel build
Jo-Philipp Wich [Fri, 30 Aug 2019 13:24:45 +0000 (15:24 +0200)]
include: kernel-build: pass pkg-config overrides to kernel build

Pass suitable pkg-config overrides to the kernel build process in
order to let our pkg-config wrapper discover libraries provided
by tools/.

This mainly affects the use of libelf which is required for the
CONFIG_STACK_VALIDATION features. So far, the build system either
silently used host system libraries or kbuild simply disabled the
feature due to the lack of a suitable libelf.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit fe43969336201f2cc7d103b68fd6e65989bee184)

16 months agotools: libelf: fix headers to trigger -Wundef warnings
Jo-Philipp Wich [Fri, 30 Aug 2019 13:22:01 +0000 (15:22 +0200)]
tools: libelf: fix headers to trigger -Wundef warnings

When libelf from tools/ is used for building the kernel, compilation
aborts due to access to undefined defines since Kbuild adds -Wundef
to the compiler flags.

Patch the header files to use `#if defined(...)` instead of `#if ...`
to prevent such issues.

Ref: https://github.com/NixOS/nixpkgs/issues/59929
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit f3ab336d7ceda929dc8dc4a8b09a9552dc6be0b1)

16 months agotools: libelf: install pkg-config file
Jo-Philipp Wich [Fri, 30 Aug 2019 13:28:27 +0000 (15:28 +0200)]
tools: libelf: install pkg-config file

Install the pkg-config definition for libelf in order to allow the
kernel build process discover it later on.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit d3f86c9cc3e465fbca51aaadbb274856831ba56c)

16 months agoscripts/feeds: fix 'src-include' directive
Bjørn Mork [Mon, 2 Sep 2019 11:49:21 +0000 (13:49 +0200)]
scripts/feeds: fix 'src-include' directive

Commit 775b70f8d5df renamed parse_file() parameters without
updating the recursive call. This broke parsing of any feeds.conf
using 'src-include'.

 $ scripts/feeds update -a
 Can't use string ("defaults") as a HASH ref while "strict refs" in use at scripts/feeds line 63, <$fh> line 1.

Fixes: 775b70f8d5df ("scripts/feeds: allow adding parameters to feeds")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
(cherry picked from commit a21b70be31a9d8adda0ae65cc38d1b3b4b6680d4)

16 months agouci: update to latest Git HEAD
Hauke Mehrtens [Sun, 1 Sep 2019 17:52:41 +0000 (19:52 +0200)]
uci: update to latest Git HEAD

415f9e4 uci/file: replace mktemp() with mkstemp()

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 6aa962a62288952aec08c1f67fb0735f420f720e)

16 months agoiwinfo: update to latest Git HEAD
Hauke Mehrtens [Sun, 1 Sep 2019 17:47:50 +0000 (19:47 +0200)]
iwinfo: update to latest Git HEAD

f599a8d iwinfo: Fix rate buffer size
71ec9be iwinfo: Fix buffer size
f8ef450 iwinfo: Add support for WPA3

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 6658447534152b72a3341b369f1eb545618fa7cf)

16 months agoFix handling of BUILD_SUFFIX in remote-gdb script
Thomas Langer [Thu, 22 Aug 2019 12:21:14 +0000 (12:21 +0000)]
Fix handling of BUILD_SUFFIX in remote-gdb script

When CONFIG_BUILD_SUFFIX is enabled, the target-* folders in build_dir
and staging_dir have this suffix in the name, but not the
toolchain directories. When detecting the names for "arch" and "libc",
also accept the suffix and do not use it for the toolchain path.

Signed-off-by: Thomas Langer <thomas.langer@intel.com>
(cherry picked from commit 035906fd05b2e5543cedd9471731043945fdcf13)

16 months agotools/cmake: Update to 3.15.1
Daniel Engberg [Sat, 16 Mar 2019 21:09:22 +0000 (21:09 +0000)]
tools/cmake: Update to 3.15.1

Update CMake to 3.15.1
Refresh patches
Remove inofficial fossies.org and replace with GitHub (link on official site)
Remove 150-C-feature-checks-Match-warnings-more-strictly.patch as it's
a no longer needed backport from upstream.
Disable ccache if GCC is 4.8, 4.9 or 5.X to avoid build failures.
Reference: https://github.com/openwrt/openwrt/pull/1929

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit 413c68d120043cd8ff1f4aa057d33c140bfc6bfa)

16 months agonftables: bump to version 0.9.2
Konstantin Demin [Wed, 21 Aug 2019 06:25:06 +0000 (09:25 +0300)]
nftables: bump to version 0.9.2

- exclude Python-related stuff from build
- drop patches:
  * 010-uclibc-ng.patch, applied upstream

ipkg size decrease by 2.8%:
old:
194.851 nftables_0.9.0-2_arm_cortex-a7_neon-vfpv4.ipk
new:
189.581 nftables_0.9.2-1_arm_cortex-a7_neon-vfpv4.ipk

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
(cherry picked from commit b74f1f335a792a15feb0fd839a69486050d3531f)

16 months agolibnftnl: bump to version 1.1.4
Konstantin Demin [Wed, 21 Aug 2019 06:41:07 +0000 (09:41 +0300)]
libnftnl: bump to version 1.1.4

ABI version is same.

The ipkg size increase by about 2.2%:
old:
47.909 libnftnl11_1.1.3-1_arm_cortex-a7_neon-vfpv4.ipk
new:
48.985 libnftnl11_1.1.4-1_arm_cortex-a7_neon-vfpv4.ipk

Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
(cherry picked from commit 699955a684eb8f6eb39123632ec7e193fa132753)

16 months agorpcd: update to latest Git HEAD
Jo-Philipp Wich [Sun, 1 Sep 2019 16:33:03 +0000 (18:33 +0200)]
rpcd: update to latest Git HEAD

821045f file: add path based read/write/exec ACL checks
fb337e5 file: add stat() information to directory listings

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 02169bd3f8ccfa3076bb4d46e979d2fdcc7d413e)

16 months agouhttpd: add support to generate EC keys
Eneas U de Queiroz [Mon, 5 Aug 2019 18:34:39 +0000 (15:34 -0300)]
uhttpd: add support to generate EC keys

This adds the key_type and ec_curve options to enable the generation of
EC keys during initialization, using openssl or the new options added to
px5g.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit 7f2b230b3b9d0a7fb758db3a9b1958845506a5a3)

16 months agopx5g: support EC keys
Eneas U de Queiroz [Mon, 5 Aug 2019 18:34:38 +0000 (15:34 -0300)]
px5g: support EC keys

This adds an 'eckey' command to generate an EC key, with an optional
curve name argument, with P-256 as default.

For the 'selfsigned' command, it adds an 'ec' algorithm argument to the
'-newkey' option, and a '-pkeyopt ec_paramgen_curve:<curvename>' option,
mirroring the way openssl specifies the curve name.

Notice that curve names are not necessarily the same in mbedtls and
openssl.  In particular, secp256r1 works for mbedtls, but openssl uses
prime256v1 instead. px5g uses mbedtls, but short NIST curve names P-256
and P-384 are specifically supported.

Package size increased by about 900 bytes (arm).

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit a552ababd4ff8e91d3f03f7496f12d080a71ba28)

16 months agoopenssl: always build with EC support
Eneas U de Queiroz [Mon, 5 Aug 2019 18:34:37 +0000 (15:34 -0300)]
openssl: always build with EC support

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
(cherry picked from commit f40262697f5aebed25313a1b2eb8f68d37c97e60)

16 months agolibnfnetlink: Avoid passing both -fPIC and -fpic
Rosen Penev [Tue, 27 Aug 2019 22:49:22 +0000 (15:49 -0700)]
libnfnetlink: Avoid passing both -fPIC and -fpic

Instead, instruct the configure script to use $(FPIC) only.

Mixing -fPIC and -fpic can cause issues on some platforms like PPC.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit 926157c2ccb02aa06b343662ecbd2571faf6eddd)

16 months agoncurses: Do not pass both -fPIC and -fpic
Rosen Penev [Tue, 27 Aug 2019 22:49:21 +0000 (15:49 -0700)]
ncurses: Do not pass both -fPIC and -fpic

The configure scripts matches Linux with -fPIC, which is not exactly what
is desired. Since we are already passing $(FPIC), added a CONFIGURE_VAR to
avoid passing -fPIC.

Removed PKG_BUILD_DIR as it is already the default value.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit e2ecf39e8e49e43b4d358853f9da51e3897d042c)

16 months agobuild: remove harmful -nopad option from mksquashfs
Christian Lamparter [Fri, 30 Aug 2019 14:52:25 +0000 (16:52 +0200)]
build: remove harmful -nopad option from mksquashfs

While the -nopad option prevents mksquashfs from padding the
image to an arbitrary 4k. It does not take into consideration
that squashfs is programmed to have this 4k padding when it's
being used on on a block device... which is its main "use-case".

Now, after a week long discussion on the ML that included a
back-and-forth between some of the possible options.
But this is likely the best KISS patch to deal with the issue
right away given the limited resources.

From squashfs code point of view, be warned. The 4k padding is
not enough when dealing with devices that have a PAGE_SIZE
bigger than 4k.

if it turns out to be affecting you, then please look-up either:
"FS#2460 - kernel panic reading squashfs from ubi volume" bug
Or the discussion on the OpenWrt-Devel ML in
"amp821xx: use newly added pad-squashfs for Meraki MR24" and
"Squashfs breakage lottery with UBI..."
before making an educated guess.

Note: This will not affect the "tiny"/small flash devices as
much as it seems at first. This is because the the rootfs_data
partition that follows uses jffs2. And it requires to be aligned
to the flash block-size in order to work at all.

So either the involved FSes will meet in the middle as before,
or not at all. But in that latter case the image was already
hoping for the "undefined behaviour" gamble to turn out in its
favour and this is probably why this was unnoticed for so long.

Fixes: FS#2460
Reported-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 1c0290c5cc6258c48b8ba46b4f9c85a21de4f875)

16 months agobase-files: use JSON for storing firmware validation info
Rafał Miłecki [Fri, 23 Aug 2019 06:15:23 +0000 (08:15 +0200)]
base-files: use JSON for storing firmware validation info

So far firmware validation result was binary limited: it was either
successful or not. That meant various limitations, e.g.:
1) Lack of proper feedback on validation problems
2) No way of marking firmware as totally broken (impossible to install)

This change introduces JSON for storing detailed validation info. It
provides a list of performed validation tests and their results. It
allows marking firmware as non-forceable (broken image that can't be
even forced to install).
Example:
{
        "tests": {
                "fwtool_signature": true,
                "fwtool_device_match": true
        },
        "valid": true,
        "forceable": true
}

Implementation is based on *internal* check_image bash script that:
1) Uses existing validation functions
2) Provides helpers for setting extra validation info

This allows e.g. platform_check_image() to call notify_check_broken()
when needed & prevent user from bricking a device.

Right now the new JSON info is used by /sbin/sysupgrade only. It still
doesn't make use of "forceable" as that is planned for later
development.

Further plans for this feature are:
1) Expose firmware validation using some new ubus method
2) Move validation step from /sbin/sysupgrade into "sysupgrade" ubus
   method so:
   a) It's possible to safely sysupgrade using ubus only
   b) /sbin/sysupgrade can be more like just a CLI

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit f522047958f99ab7b506ec550f796c0460af1a85)

16 months agoscripts/feeds: allow adding parameters to feeds
Jo-Philipp Wich [Wed, 28 Aug 2019 13:21:35 +0000 (15:21 +0200)]
scripts/feeds: allow adding parameters to feeds

this allows adding "--" prefixed parameters inside feeds.conf between the
target and name. The first parameter is --force which has the same effect
as using -f when installing any of the packages. This allows creating
feeds that will override base packages by default.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 775b70f8d5dfe9830aaf3b79fc8fb38c8148ee1f)

16 months agoprocd: fix compile issue with glibc (FS#2469)
Hans Dedecker [Wed, 28 Aug 2019 13:28:57 +0000 (15:28 +0200)]
procd: fix compile issue with glibc (FS#2469)

0430252 sysupgrade: add missing _GNU_SOURCE define (FS#2469)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit 6e45ba4699eb8424951648cfeddc0a8633f8891e)

16 months agoopenssl: refresh patches
Christian Lamparter [Sat, 24 Aug 2019 09:23:55 +0000 (11:23 +0200)]
openssl: refresh patches

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 5ef3fe614c1e8c350ca0083f61577a89c002bc53)

16 months agotreewide: sysupgrade: pass "save_partitions" option to the "sysupgrade" method
Rafał Miłecki [Fri, 16 Aug 2019 15:02:58 +0000 (17:02 +0200)]
treewide: sysupgrade: pass "save_partitions" option to the "sysupgrade" method

This explicitly lets stage2 know if partitions should be preserved. No
more "touch /tmp/sysupgrade.always.overwrite.bootdisk.partmap" hack.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit b6f4cd57e19a8cfcd9ff52582b65164ce6213c3d)

16 months agobase-files: pass "save_config" option to the "sysupgrade" method
Rafał Miłecki [Fri, 16 Aug 2019 14:54:38 +0000 (16:54 +0200)]
base-files: pass "save_config" option to the "sysupgrade" method

This explicitly lets stage2 know if config should be preserved.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit b534ba96110012d2697d19d71b7dcd60bd4cd375)

16 months agoprocd: update to latest git HEAD
Rafał Miłecki [Thu, 22 Aug 2019 11:45:45 +0000 (13:45 +0200)]
procd: update to latest git HEAD

9558031 system: support passing "options" to the "sysupgrade" ubus method

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 2b1a6d263cc84ac6189447fe971b52d8b34cea51)

16 months agofirewall: update to latest git HEAD
Kevin Darbyshire-Bryant [Tue, 20 Aug 2019 11:29:47 +0000 (12:29 +0100)]
firewall: update to latest git HEAD

bf29c1e firewall3: ipset: Handle reload_set properly

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(cherry picked from commit bd01346bb463d371627739fad539310ef5bd4146)

16 months agoelfutils: bump to 0.177
Luiz Angelo Daros de Luca [Mon, 19 Aug 2019 03:09:05 +0000 (00:09 -0300)]
elfutils: bump to 0.177

200-uclibc-ng-compat.patch is upstream now.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
(cherry picked from commit 0851ce4ff97260a0fab2a507ee8370e60f78370d)

16 months agoiftop: update to HEAD of 2018-10-03 - 77901c
Christian Lamparter [Sun, 18 Aug 2019 00:31:01 +0000 (02:31 +0200)]
iftop: update to HEAD of 2018-10-03 - 77901c

Update iftop to commit 77901c8c53e01359d83b8090aacfe62214658183

git log --pretty=oneline --abbrev-commit 949ed0f7..77901c8c

77901c8 Support scales beyond 1Gbps

Created with the help of the make-package-update-commit.sh script.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit cfd0748497c5c27c6d0f80b0ad3698ffe4428352)

16 months agonghttp2: bump to 1.39.2
Hans Dedecker [Sun, 18 Aug 2019 16:54:47 +0000 (18:54 +0200)]
nghttp2: bump to 1.39.2

957abacf Bump up version number to 1.39.2, LT revision to 32:0:18
83d362c6 Don't read too greedily
a76d0723 Add nghttp2_option_set_max_outbound_ack
db2f612a nghttpx: Fix request stall

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit 58f929077f8687adbf75338504f319d054a96153)

16 months agoltq-ifxos: refer to https://bugs.openwrt.org
Yousong Zhou [Sun, 18 Aug 2019 15:21:23 +0000 (15:21 +0000)]
ltq-ifxos: refer to https://bugs.openwrt.org

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit f0f5cb26cb7ced03c70063d08c90d211f80b7a31)

16 months agoct-bugcheck: report to https://openwrt.org by default
Yousong Zhou [Sun, 18 Aug 2019 15:19:57 +0000 (15:19 +0000)]
ct-bugcheck: report to https://openwrt.org by default

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 26615ededcdc7c6d30c72d77c3a890be1f777b32)

16 months agodownload.pl: use https://source.openwrt.org
Yousong Zhou [Sun, 18 Aug 2019 15:18:10 +0000 (15:18 +0000)]
download.pl: use https://source.openwrt.org

https://sources.lede-openwrt.org now redirects to there

https://downloads.openwrt.org/sources returns 404, so remove it here

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(cherry picked from commit 0f3667864d5391c2d9ace63ccfc83ab270405cc9)

16 months agou-boot.mk: use openwrt url instead of lede project
Luis Araneda [Sun, 18 Aug 2019 14:59:11 +0000 (10:59 -0400)]
u-boot.mk: use openwrt url instead of lede project

The LEDE URL is automatically redirected to the OpenWRT one,
returning an HTTP 301 code (Moved Permanently).

Also, use https, as indicated by the redirect.

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
(cherry picked from commit b39ded4ab7e02cedd50810a206dadd71e1ea7fb7)

16 months agoustream-ssl: update to latest git HEAD
Hauke Mehrtens [Sat, 17 Aug 2019 15:09:42 +0000 (17:09 +0200)]
ustream-ssl: update to latest git HEAD

e8f9c22 Revise supported ciphersuites
7e9e269 wolfssl, openssl: use TLS 1.3, set ciphersuites

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit ced2b7bb988426aaece07a78c17d5a7c268e54c4)