openwrt/openwrt.git
2 years agoscripts/download.pl: fix error message on hash mismatch
Felix Fietkau [Tue, 4 Apr 2017 09:44:22 +0000 (11:44 +0200)]
scripts/download.pl: fix error message on hash mismatch

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 2fd15033783a9dfa84d2a43fb81ff222ab865407)

2 years agonetifd: fix fw3 warnings in dhcp script
Hans Dedecker [Sun, 2 Apr 2017 19:13:08 +0000 (21:13 +0200)]
netifd: fix fw3 warnings in dhcp script

Fix fw3 warnings in dhcp script in case fw3 is not enabled

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(cherry picked from commit 20e40db524fb6c391f47619b18bf36bf7932478a)

2 years agobuild: allow specifying flow-control to grub on serial console
Philip Prindeville [Tue, 7 Feb 2017 03:33:36 +0000 (20:33 -0700)]
build: allow specifying flow-control to grub on serial console

On the more sophisticated (i.e. deeper FIFO) serial controllers,
flow-control might be needed to avoid dropping output.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit 7fe5963be023fd59a11652ecfb065d3405a91c48)

2 years agokexec-tools: get kexec running on MUSL and x86 hardware
Philip Prindeville [Wed, 22 Mar 2017 03:55:23 +0000 (21:55 -0600)]
kexec-tools: get kexec running on MUSL and x86 hardware

Couple of important upstream patches (slated for 2.0.15) that
are necessary for kexec to run on MUSL and on x86 hardware.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
(cherry picked from commit dfacdc6a99757fcf7804b38784fc24f9fad30650)

2 years agobusybox: don't install NTP scripts if NTP isn't configured
Philip Prindeville [Mon, 6 Feb 2017 22:26:49 +0000 (15:26 -0700)]
busybox: don't install NTP scripts if NTP isn't configured

If you're using Chrony or NTPD you don't want the busybox NTP server
as well.  Make it's installation truly conditional.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [simplify]
(cherry picked from commit 0b24850e97789818fadcbce4b8de4abc429fd9f2)

2 years agoar8327: Add workarounds for AR8337 switch.
Vittorio Gambaletta [Sun, 26 Mar 2017 08:08:20 +0000 (10:08 +0200)]
ar8327: Add workarounds for AR8337 switch.

RGMII RX delay setting needs to be always specified for AR8337 to
avoid port 5 RX hang on high traffic / flood conditions.

Also, the HOL registers that set per-port and per-packet-priority
buffer sizes are updated with the reduced values suggested by the
QCA switch team.

Finally, AR8327 reserved register fixups are disabled for the AR8337.

This patch is adapted from the Code Aurora QSDK, but with magic
values mapped to proper defines.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
(cherry picked from commit 967b6be118e3217e8d6a28df9c615d3255e7b1ae)

2 years agobuild: fix STAMP_PREPARED with quilt
Felix Fietkau [Wed, 22 Mar 2017 19:16:15 +0000 (20:16 +0100)]
build: fix STAMP_PREPARED with quilt

quilt.mk needs to be included first, to ensure that STAMP_PREPARED does
not include the hash if quilt is used.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 89118da865a34ed9537a088196d81ca9e37cb983)

2 years agolantiq: remove lantiq_board_model, it is unused
Felix Fietkau [Fri, 17 Mar 2017 15:21:49 +0000 (16:21 +0100)]
lantiq: remove lantiq_board_model, it is unused

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit fd93f81fd85e964a697a5f550f7f162e3ec1ca05)

2 years agolantiq: remove lantiq_board_name, use the generic function instead
Felix Fietkau [Fri, 17 Mar 2017 15:21:30 +0000 (16:21 +0100)]
lantiq: remove lantiq_board_name, use the generic function instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 7e798dab56546d6f8e2fe0f913ff41e8f010af51)

2 years agolantiq: move lantiq_board_detect() to 03_preinit_board.sh
Felix Fietkau [Fri, 17 Mar 2017 15:17:42 +0000 (16:17 +0100)]
lantiq: move lantiq_board_detect() to 03_preinit_board.sh

It is only used there

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit aa95d6cd20f7e08420562b9747c197c2eac1d2e2)

2 years agobase-files: add generic board_name function to functions.sh
Felix Fietkau [Fri, 17 Mar 2017 15:12:27 +0000 (16:12 +0100)]
base-files: add generic board_name function to functions.sh

This will be used to replace all those nasty board specific scripts
that do basically the same thing

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit ec991424749b9eed37d01bc8adb9fb22fb0c98a7)

2 years agomac80211: Fix race condition leading to wifi interfaces not coming up at boot sometimes.
Vittorio Gambaletta [Tue, 14 Mar 2017 13:45:15 +0000 (14:45 +0100)]
mac80211: Fix race condition leading to wifi interfaces not coming up at boot sometimes.

In the drv_mac80211_setup function, mac80211_interface_cleanup
is called to ask the kernel to delete all existing interfaces
for the phy that is being configured via netlink.

Later in the first function, mac80211_prepare_vif is called to
set up the new interfaces as required.

But sometimes, when mac80211_prepare_vif (and so the relevant
`iw phy x interface add y` command) runs, the kernel might still
be cleaning up the old interface with the same ifname. It usually
takes very few time to do that; possibly a few milliseconds of
sleep in the script after detecting this error condition could be
enough, but the busybox sh does not support sub-second sleep
intervals.

When this happens, iw obviously fails to create the new interface;
and the following message is printed in the system log, followed by
subsequent failure messages from hostapd in case this would have been
an AP interface.

Tue Mar 14 04:21:57 2017 daemon.notice netifd: radio1 (2767): command failed: Too many open files in system (-23)

This was a long-standing issue existing since at least OpenWrt Backfire,
and today I finally managed to debug and (hopefully) solve it.
It was happening very few times on most devices; but it was happening
a lot more frequently on fast platforms with multiple radios, such as
the powerpc-based dual-ath9k-radio tl-wdr4900-v1.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
(cherry picked from commit 8301e613655c2d95fa5430a1a57d92d966fdc70b)

2 years agoscripts: only generate config from feature flag if fully match
Hauke Mehrtens [Tue, 14 Mar 2017 17:55:02 +0000 (18:55 +0100)]
scripts: only generate config from feature flag if fully match

Without this change the code checked if the string was contained in the
feature option and not if the string matches the complete word. This only
removes the nand option from the omap24xx target, the other changes are
only removing options which were added twice.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
(cherry picked from commit d5a770f2c139a335e7602bec60dbeabd4add1e8b)

2 years agolzo: Update to 2.10
Daniel Engberg [Sun, 12 Mar 2017 18:43:50 +0000 (19:43 +0100)]
lzo: Update to 2.10

Update lzo to 2.10

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit cc5721c3b8e399126a270fd46f5ac4dffc9b3319)

2 years agotools/coreutils: Update to 8.27
Daniel Engberg [Tue, 14 Mar 2017 06:53:38 +0000 (07:53 +0100)]
tools/coreutils: Update to 8.27

Update coreutils to 8.27

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit 80246ce67ec2a30dda51e3e4e135eab2ff249ccb)

2 years agotools/libressl: Update to 2.5.1
Daniel Engberg [Tue, 14 Mar 2017 06:46:39 +0000 (07:46 +0100)]
tools/libressl: Update to 2.5.1

Update libressl to 2.5.1

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit e45ee66149688747a337a470a19beb182ce4dd61)

2 years agotools/dosfstools: Update to 4.1
Daniel Engberg [Tue, 14 Mar 2017 07:23:10 +0000 (08:23 +0100)]
tools/dosfstools: Update to 4.1

Update to 4.1
Remove 0001-mkfs-Default-to-64-32-heads-sectors-for-targets-smal.patch
as it's included in upstream repo.
Refresh patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit 49ded28027e5bba3ce623a8205aac0e8e70e250a)

2 years agotools/sed: Update to 4.4
Daniel Engberg [Wed, 15 Mar 2017 07:52:29 +0000 (08:52 +0100)]
tools/sed: Update to 4.4

Update sed to 4.4

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit 65d2800bd648a73a6814de2d42c074db1d290521)

2 years agolldpd: bump to 0.9.6
Stijn Tintel [Wed, 15 Mar 2017 07:30:26 +0000 (08:30 +0100)]
lldpd: bump to 0.9.6

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit b03b293079ef3e6cd5488ea7f58a43a1b545c3ef)

2 years agox86: image: drop duplicated copy of bzImage into vmlinuz
Rafał Miłecki [Sun, 12 Mar 2017 17:46:59 +0000 (18:46 +0100)]
x86: image: drop duplicated copy of bzImage into vmlinuz

It's already done once few lines earlier in the Image/Build/iso.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 425f958830428f989d7381ddda3a8f503e587c5c)

2 years agolibnl: Fix building with uClibc
Alexey Brodkin [Mon, 13 Mar 2017 09:47:45 +0000 (12:47 +0300)]
libnl: Fix building with uClibc

uClibc doesn't implement strerror_l() and thus libnl starting from
3.2.29 couldn't be compiled with it any longer, see
https://github.com/thom311/libnl/commit/6c2d111177e91184073c44f83d4a6182aaba06d7

To work-around that problem we'll just do a check on strerror_l()
availability during configuration and if it's not there just fall back
to locale-less strerror().

Patch for libnl is alreadfy merged upstream, see
https://github.com/thom311/libnl/commit/e15966ac7f3b43df2acf869f98089762807d0568
and once the next libnl release happens this one must be removed from
Lede/OpenWrt.

Signed-off-by: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: John Crispin <john@phrozen.org>
Cc: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit 51d9ac61c711e7e00f8f2eaf5b3503238864508a)

2 years agotoolchain: add musl libc.so to external toolchain
Hauke Mehrtens [Tue, 14 Mar 2017 18:18:57 +0000 (19:18 +0100)]
toolchain: add musl libc.so to external toolchain

musl provides a /lib/libc.so file which should be integrated into the libc
package when the external toolchain with musl is used.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit b6a8b43dd2771d4d237256417218bed862545ef4)

2 years agoiwcap: fix handling kill signal during dump
Felix Fietkau [Thu, 9 Mar 2017 07:53:52 +0000 (08:53 +0100)]
iwcap: fix handling kill signal during dump

Do not run another loop iteration before checking the stop flag

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 2f09a1e3c950c9b2993ae52d1b0e78317c344470)

2 years agox86: image: drop unneeded grub call
Rafał Miłecki [Sat, 11 Mar 2017 22:03:12 +0000 (23:03 +0100)]
x86: image: drop unneeded grub call

It appears there isn't any Image/Build/grub/* define so this step looks
redundant.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit f5d403488ed62bb7f0e0017b02890b4d72240a55)

2 years agox86: image: drop unused ROOTDELAY variable
Rafał Miłecki [Sat, 11 Mar 2017 22:03:11 +0000 (23:03 +0100)]
x86: image: drop unused ROOTDELAY variable

It's unused since commit 742700719303 ("x86: remove the olpc subtarget,
it has been unmaintained for a long time").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit 9a267e6a4b08d1fa2a98523e5eb9f2325c9506e2)

2 years agoccache: update to 3.3.4
Kevin Darbyshire-Bryant [Fri, 3 Mar 2017 11:49:06 +0000 (11:49 +0000)]
ccache: update to 3.3.4

Update from 3.3.2 to 3.3.4 & refresh patches.

Remove 110-disable-assembler-support as ccache now understands the
'.incbin' directive.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
(cherry picked from commit 2cf00b640dce3ee9b09b41f2f1486a6a50bca45b)

2 years agobase-files: add submission service port
Lucian Cristian [Sat, 4 Mar 2017 13:24:44 +0000 (15:24 +0200)]
base-files: add submission service port

prevent postfix start failure fatal: 0.0.0.0:submission: Unrecognized service

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
(cherry picked from commit 8e75efc0fb52d02a0cdc13a5ad819b380de6f3da)

2 years agoprocd.sh: use parameterized respawn values
Claudiu Brasovean [Tue, 28 Feb 2017 09:51:01 +0000 (11:51 +0200)]
procd.sh: use parameterized respawn values

continue work started here: http://patchwork.ozlabs.org/patch/520859

Extend /etc/config/system with parameters to set the default respawn treshold and respawn timeout
for procd launched services that have respawn enabled.
This results in cleaner init scripts, while making sure services have respawn parameters set.

Signed-off-by: Claudiu Brasovean <cbrasho@gmail.com>
(cherry picked from commit c70c6ac070223114ee8c9f33e5e416edb005ca83)

2 years agotoolchain: Allow external toolchains to specify libthread-db
Florian Fainelli [Thu, 2 Mar 2017 19:37:29 +0000 (11:37 -0800)]
toolchain: Allow external toolchains to specify libthread-db

We need to let external toolchains be able to specify the path and
specification file to the libthread-db POSIX thread debugging shared
libraries.

This fixes GDB not being able to be installed because it is depending on
libthread-db:

Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies
 * for gdb:
 *      libthread-db *
 * opkg_install_cmd: Cannot install package gdb.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit 7f0c95a7dfff8aa0b6f5e3e78263cab108245e4c)

2 years agorssileds: Fix build with external toolchains
Florian Fainelli [Mon, 13 Feb 2017 02:34:53 +0000 (18:34 -0800)]
rssileds: Fix build with external toolchains

Pass down TARGET_CPPFLAGS for path to header files, and append the
libraries we depend on in TARGET_LDFLAGS. Put TARGET_LDFLAGS at the end
of the command line as is required by modern GCC/binutils.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit 30159b3886849f94cd065ecece7ac988bfb89548)

2 years agoadb: Also pass TARGET_CPPFLAGS
Florian Fainelli [Mon, 13 Feb 2017 02:29:53 +0000 (18:29 -0800)]
adb: Also pass TARGET_CPPFLAGS

Fixes build issues with external toolchains that do not have STAGING_DIR
in their default search path.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit 4aa1560de3ce7e1ce813f450025ee0c55ab868eb)

2 years agoswconfig: Link with libubox
Florian Fainelli [Sun, 12 Feb 2017 22:10:12 +0000 (14:10 -0800)]
swconfig: Link with libubox

Fixes linking failures observed with external toolchains:

/home/florian/dev/toolchains/stbgcc-4.8-1.5/bin/../lib/gcc/mipsel-linux-gnu/4.8.5/../../../../mipsel-linux-gnu/bin/ld:
warning: libubox.so, needed by
/home/florian/dev/openwrt/trunk/staging_dir/target-mipsel-unknown-linux-gnu_glibc/usr/lib/libuci.so,
not found (try using -rpath or -rpath-link)
/home/florian/dev/openwrt/trunk/staging_dir/target-mipsel-unknown-linux-gnu_glibc/usr/lib/libuci.so:
undefined reference to `blobmsg_open_nested'
/home/florian/dev/openwrt/trunk/staging_dir/target-mipsel-unknown-linux-gnu_glibc/usr/lib/libuci.so:
undefined reference to `blobmsg_parse'
/home/florian/dev/openwrt/trunk/staging_dir/target-mipsel-unknown-linux-gnu_glibc/usr/lib/libuci.so:
undefined reference to `blob_nest_end'
/home/florian/dev/openwrt/trunk/staging_dir/target-mipsel-unknown-linux-gnu_glibc/usr/lib/libuci.so:
undefined reference to `blobmsg_add_field'

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit fe8618a8fe0db1bc8f343c0f75082ff96e9991ab)

2 years agopx5g: Fix TARGET_LDFLAGS and add TARGET_CPPFLAGS
Florian Fainelli [Sun, 12 Feb 2017 22:07:36 +0000 (14:07 -0800)]
px5g: Fix TARGET_LDFLAGS and add TARGET_CPPFLAGS

Make sure we pass down TARGET_CPPFLAGS to let toolchains with no default
search paths to find the mbdetls headers, and override TARGET_LDFLAGS to
include libraries we are linking against.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit 306ee6436170d4c3c0c677653e9a20a8ee116cf7)

2 years agoomcproxy: Update to latest HEAD
Florian Fainelli [Sun, 12 Feb 2017 22:05:17 +0000 (14:05 -0800)]
omcproxy: Update to latest HEAD

Brings the following change:
1fe6f48f8a50 Cmake: Find libubox/list.h

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit 4c02435b9b985a10d33bc195acddd31c8545a277)

2 years agobsdiff: Also pass down TARGET_CPPFLAGS
Florian Fainelli [Sun, 12 Feb 2017 21:21:01 +0000 (13:21 -0800)]
bsdiff: Also pass down TARGET_CPPFLAGS

Fixes build with external toolchains not having STAGING_DIR in their
default search path(s).

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit 562ebe798255a2bb71c6a621d6a70662dfbd63c4)

2 years agothc-ipv6: Allow overriding CFLAGS
Florian Fainelli [Sun, 5 Feb 2017 04:57:34 +0000 (20:57 -0800)]
thc-ipv6: Allow overriding CFLAGS

thc-ipv6 did not allow an external environment to override CFLAGS, which
would lead to our CFLAGS not being passed properly (relro,
optimizations, etc...)

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit 9b2321f42d075a12e73a81b89bd49b8696d3700f)

2 years agotools/m4: update 1.4.18
Etienne Haarsma [Sun, 12 Feb 2017 15:50:07 +0000 (16:50 +0100)]
tools/m4: update 1.4.18

Patch 100-fix-gets-removal.patch is removed because it's included in the new version.

Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
(cherry picked from commit d90abebd06bbb004fc7957c39fe89202fbdca9f2)

2 years agobuild: get rid of FIND_L from host.mk
Felix Fietkau [Mon, 20 Feb 2017 12:03:49 +0000 (13:03 +0100)]
build: get rid of FIND_L from host.mk

This was added for Mac OS X many years ago, but recent versions also
support find -L

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit be206eba3a57128695a00f490767e5c136e43ab7)

2 years agobuild: unsilence move command
Thomas Reifferscheid [Mon, 20 Feb 2017 16:48:50 +0000 (17:48 +0100)]
build: unsilence move command

The @ sign in front of the "mv" command was significantly suppressing
output to stdout. When reviewing the make/build logs it was tricking
me a whole lot and it mad me lose time. Removing the @ sign will get
stdout and logs right about what happened when.

Signed-off-by: Thomas Reifferscheid <thomas@reifferscheid.org>
(cherry picked from commit 1d49b534f5b74676f30f2ee1ba78d9e02d59f0bc)

2 years agobuild: skip headers install and config on make target/linux/prepare
Felix Fietkau [Wed, 15 Feb 2017 11:34:52 +0000 (12:34 +0100)]
build: skip headers install and config on make target/linux/prepare

This simplifies working with quilt on the kernel tree

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit dce6eeccc09339c7101a5b6b3fdba8b4d8f41247)

2 years agobuild: make Host/Install/Default use Host/Compile/Default with an extra argument
Felix Fietkau [Thu, 9 Feb 2017 12:34:21 +0000 (13:34 +0100)]
build: make Host/Install/Default use Host/Compile/Default with an extra argument

Allows parallelizing compile steps that might be necessary during install

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit fe1e3622a271386ea0413c97d9884e9935e17f11)

2 years agobuild: Pass -iremap gcc option as a single argument
Michal Sojka [Thu, 2 Feb 2017 11:13:03 +0000 (12:13 +0100)]
build: Pass -iremap gcc option as a single argument

Passing -iremap argument separately causes problems with projects that
use scons and its ParseFlags function. Consider this SConscript
example:

    env = Environment()
    d = env.ParseFlags("-iremap one:two")

ParseFlags will interpret one:two as a file name and the returned dict
d will contain only "-iremap". When the -iremap is passed to the
compiler without an argument, compilation obviously fails.

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
(cherry picked from commit 202ae4cc6a910dec2441c45dfdf5814ac4d82518)

2 years agotoolchain/gcc: parallelize make install
Felix Fietkau [Thu, 9 Feb 2017 12:35:07 +0000 (13:35 +0100)]
toolchain/gcc: parallelize make install

If the staging dir was deleted, the build needs to recompile some files.
This change speeds up this corner case significantly

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 0f5d17a7e6acceb18867fd951b231bfb6c4d8946)

2 years agotoolchain/musl: parallelize make install
Felix Fietkau [Thu, 9 Feb 2017 12:35:51 +0000 (13:35 +0100)]
toolchain/musl: parallelize make install

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 43332f513baf35e2bcd3285d7c93d592001943f6)

2 years agoimagebuilder: make submake invocations less verbose
Jo-Philipp Wich [Mon, 1 Aug 2016 16:26:05 +0000 (18:26 +0200)]
imagebuilder: make submake invocations less verbose

Use silent make invocations for sub-makes like build_image or checksum to
avoid bloating the IB output with non-status info.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 0d1765b4ba2575ad7dbfbea5e5d04ba1224cdc0a)

2 years agogcc: remove obsolete uclibc patch
Felix Fietkau [Wed, 1 Feb 2017 07:22:27 +0000 (08:22 +0100)]
gcc: remove obsolete uclibc patch

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 70973dd30d29c9d7e4402578da1d36e05e3d142d)

2 years agotoolchain/gcc: reduce source directory size by about 420 MB
Felix Fietkau [Wed, 1 Feb 2017 07:29:06 +0000 (08:29 +0100)]
toolchain/gcc: reduce source directory size by about 420 MB

Remove gcc testsuite, ada and libjava (if not selected)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit f204e0fc4619c7c64d0d99b87b0ddd802338d78a)

2 years agobcm53xx: suppress osafeloader info error messages during flashing
Felix Fietkau [Mon, 30 Jan 2017 10:46:08 +0000 (11:46 +0100)]
bcm53xx: suppress osafeloader info error messages during flashing

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 727e244faec8ec8e0004a2b772d1a9424f0c9d5d)

2 years agotoolchain: Broaden the executable loader pattern
Florian Fainelli [Sun, 1 Jan 2017 00:13:35 +0000 (16:13 -0800)]
toolchain: Broaden the executable loader pattern

Some toolchains will produce executables with an interpreter that is e.g:
ld.so.1 (typically a symbolic link). Due to our current LIBC_SPEC_FILE value,
we would not be able to copy this symbolic link/file over to the rootfs and
executables would fail to load. Extend the search pattern to include all
ld*.so* files that could be needed.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit 200d932322f3d8c436a67c53f4fbca87f0aab8af)

2 years agobuild: Suffix build directory with _$(LIBC) for external toolchains
Florian Fainelli [Sun, 15 Jan 2017 04:04:38 +0000 (20:04 -0800)]
build: Suffix build directory with _$(LIBC) for external toolchains

For external toolchain, we also know the type of C library used, and the
toolchain triplet may not always be reflective of that, therefore make
$(TARGET_DIR_NAME) suffixed with _$(LIBC).

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit 57657a72376000b5843367e627098f09fe9c3647)

2 years agotools/sstrip: Fix compile under standard linux.
Rosen Penev [Thu, 23 Nov 2017 21:18:07 +0000 (13:18 -0800)]
tools/sstrip: Fix compile under standard linux.

bswap32 undefined is the issue. Added the proper header. Also fixed a few format/conversion warnings that clang complained about without -Wall or -Wextra.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(cherry picked from commit d6e34b735201805ae9112a7997f15b80f5926942)

2 years agoopenssl: update to 1.0.2n
Peter Wagner [Fri, 8 Dec 2017 05:23:26 +0000 (06:23 +0100)]
openssl: update to 1.0.2n

add no-ssl3-method again as 1.0.2n compiles without the ssl3-method(s)

Fixes CVEs: CVE-2017-3737, CVE-2017-3738

Signed-off-by: Peter Wagner <tripolar@gmx.at>
(backported from commit 55e70c8b72dbb8e812ceb790bf08543d69fce86e)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2 years agobase-files: upgrade: make get_partitions() endian agnostic
Christian Lamparter [Sun, 19 Nov 2017 16:19:21 +0000 (17:19 +0100)]
base-files: upgrade: make get_partitions() endian agnostic

This patch fixes two issues with the current get_partitions()
function.

First: "Invalid partition table on $disk" will pop up on
legitimate images on big endian system.

This is because the little-endian representation of "55 AA" is
assumed in the context of little-endian architectures. On these
comparing it to the 16-bit word 0xAA55 does work as intented.
Whereas on big-endian systems, this would have to be 0x55AA.

This patch fixes the issue by replacing the integer conversion
and value match check with just a string comparision.

Second: The extraction of the type, start LBA and LBA num from
the partition table has the same endianness issue. This has been
fixed by using the new hex_le32_to_cpu() function. This function
will translate the stored little-endian data to the correct
byte-order if necessary.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 4e3f6dae04fb526a78e613db6c65aee584403d36)

2 years agocyassl: update to wolfssl 3.12.2 (1 CVE)
Jo-Philipp Wich [Tue, 12 Dec 2017 16:30:34 +0000 (17:30 +0100)]
cyassl: update to wolfssl 3.12.2 (1 CVE)

Update wolfssl to the latest release v3.12.2 and backport an upstream
pending fix for CVE-2017-13099 ("ROBOT vulnerability").

Ref: https://github.com/wolfSSL/wolfssl/pull/1229
Ref: https://robotattack.org/

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(backported from commit 902961c148b1f6d06a6159090366250281d801d7)

2 years agomdadm: fix parameter quoting
Jo-Philipp Wich [Fri, 27 Oct 2017 01:25:29 +0000 (03:25 +0200)]
mdadm: fix parameter quoting

Ensure that path defines are passed quoted to the compiler in order
to avoid cpp syntax errors.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit d4e7af52788fe6a5495064606e674ed6897a69cb)

2 years agomdadm: Fix config generation
Rosen Penev [Tue, 17 Oct 2017 16:28:39 +0000 (09:28 -0700)]
mdadm: Fix config generation

The init script generated something like "DEVICE=/dev/sda" when it should
have been generating "DEVICE /dev/sda". mdadm errors on this. Patch by jow.

Also changed the default sendmail path to /usr/sbin/sendmail. No package
in LEDE provides /sbin/sendmail. msmtp provides /usr/sbin/sendmail so use
that.

Also add a patch to fix file paths for mdadm runtime files. mdadm currently
errors on them since /run is missing. Once /run is added to stock LEDE, this
patch can be removed.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
[rewrap commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 8eadec40bdc205568e34e19b07b2a3035c9223fb)

2 years agomdadm: Do not check RUN_DIR
Florian Fainelli [Wed, 31 May 2017 21:39:12 +0000 (14:39 -0700)]
mdadm: Do not check RUN_DIR

Fixes build failure on hosts that do not have mdadm
installed/configured:

make[3]: Entering directory
`/local/users/fainelli/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/mdadm-4.0'
***** Parent of /run/mdadm does not exist.  Maybe set different RUN_DIR=
*****  e.g. make RUN_DIR=/dev/.mdadm
***** or set CHECK_RUN_DIR=0
make[3]: *** [check_rundir] Error 1
make[3]: Leaving directory
`/local/users/fainelli/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/mdadm-4.0'
make[2]: ***
[/local/users/fainelli/openwrt/trunk/build_dir/target-mipsel-linux-gnu_glibc/mdadm-4.0/.built]
Error 2
make[2]: Leaving directory
`/local/users/fainelli/openwrt/trunk/package/utils/mdadm'
make[1]: *** [package/utils/mdadm/compile] Error 2
make[1]: Leaving directory `/local/users/fainelli/openwrt/trunk'
make: *** [package/mdadm/compile] Error 2

Fixes: 980c41f8e04f ("utils/mdadm: Update to 4.0")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
(cherry picked from commit 5229c453630c0b023c3d65ef6005adbe48062bbb)

2 years agokernel: remove out of tree direct-io disable hack
Felix Fietkau [Wed, 12 Apr 2017 07:35:14 +0000 (09:35 +0200)]
kernel: remove out of tree direct-io disable hack

Direct-IO support has to be enabled for the release build anyway, so
this hack is not worth keeping

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from commit 0b7ed65cec8084bb98ae0e2758b7aca6c447cd4b)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2 years agoutils/mdadm: Update to 4.0
Daniel Engberg [Fri, 24 Mar 2017 11:17:24 +0000 (12:17 +0100)]
utils/mdadm: Update to 4.0

Update mdadm to 4.0
Remove 000-compile.patch as it's fixed upstream
Refresh patches
Add mdadm.h-Undefine-dprintf-before-redefining.patch
Source: http://git.openembedded.org/openembedded-core/tree/meta/recipes-extended/mdadm/files
Add RAID 0,1 and 10 as depends to make mdadm usable.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(cherry picked from commit 980c41f8e04f5586731e84492001971eb8371590)

2 years agomdadm: extend uci config support
Jo-Philipp Wich [Thu, 9 Feb 2017 12:22:47 +0000 (13:22 +0100)]
mdadm: extend uci config support

Extend the mdadm package to allow to explicitely configure arrays as
well as device list entries.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(cherry picked from commit 813efe57e434037fb58bd3e16ebd3a1cfd6ceb82)

2 years agorules.mk: make PKG_CONFIG_DEPENDS properly track string values
Matthias Schiffer [Fri, 24 Feb 2017 11:16:33 +0000 (12:16 +0100)]
rules.mk: make PKG_CONFIG_DEPENDS properly track string values

The confvar macro is adjusted to not only consider if a variable has a
value or not, but also the value itself. Instead of creating a string of
'y' and 'n' characters, all variable names and values are concatenated
and hashed.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
(cherry picked from commit 5ef0854b1109ba2dbd1dd3d9f87ce5801002d0ba)

2 years agokernel: bump 4.4 to 4.4.103 for 17.01
Etienne Haarsma [Fri, 1 Dec 2017 17:26:40 +0000 (18:26 +0100)]
kernel: bump 4.4 to 4.4.103 for 17.01

Refreshed all patches.

Removed upstream ramips patches:
0101-MIPS-ralink-Fix-MT7628-pinmux.patch
0102--MIPS-ralink-Fix-typo-in-mt7628-pinmux-function.patch

Compile-tested: ar71xx
Run-tested: ar71xx

Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
2 years agouqmi: also try newer pin verification
Koen Vandeputte [Tue, 24 Oct 2017 14:20:21 +0000 (16:20 +0200)]
uqmi: also try newer pin verification

Newer devices tend to only support the newer version of the pin
verification command, so also try that one.

Fixes PIN issues with modems like the Sierra Wireless MC7455

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2 years agoopkg: bump to version 2017-12-08
Rafał Miłecki [Fri, 8 Dec 2017 12:57:46 +0000 (13:57 +0100)]
opkg: bump to version 2017-12-08

This updates package to the latest commit from the lede-17.01 branch. It
contains few fixes backported from the master:
1) SHA256 fix
2) URL encoding which allows hosting packages on some more picky servers

Changes:
9f61f7a opkg_download: decode file:/ URLs
3c46c88 file_util: implement urldecode_path()
79908c2 file_util: consolidate hex/unhex routines
793fbac opkg: encode archive filenames while constructing download URLs
a6bb5cb file_util: implement urlencode_path() helper
098e774 libopkg: fix SHA256 calculation for big endian system

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agohostapd: backport fix for wnm_sleep_mode=0
Timo Sigurdsson [Tue, 14 Nov 2017 20:41:30 +0000 (21:41 +0100)]
hostapd: backport fix for wnm_sleep_mode=0

wpa_disable_eapol_key_retries can't prevent attacks against the Wireless
Network Management (WNM) Sleep Mode handshake. Currently, hostapd
processes WNM Sleep Mode requests from clients regardless of the setting
wnm_sleep_mode. Backport Jouni Malinen's upstream patch 114f2830 in
order to ignore such requests by clients when wnm_sleep_mode is disabled
(which is the default).

Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
[rewrite commit subject (<= 50 characters), bump PKG_RELEASE]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit bd45e15d0afe64dfed5a02a50a634f7947b50144
 fixed PKG_RELEASE and renumbered patch)

Conflicts:
package/network/services/hostapd/Makefile

2 years agohostapd: Expose the tdls_prohibit option to UCI
Timo Sigurdsson [Tue, 14 Nov 2017 20:41:29 +0000 (21:41 +0100)]
hostapd: Expose the tdls_prohibit option to UCI

wpa_disable_eapol_key_retries can't prevent attacks against the
Tunneled Direct-Link Setup (TDLS) handshake. Jouni Malinen suggested
that the existing hostapd option tdls_prohibit can be used to further
complicate this possibility at the AP side. tdls_prohibit=1 makes
hostapd advertise that use of TDLS is not allowed in the BSS.

Note: If an attacker manages to lure both TDLS peers into a fake
AP, hiding the tdls_prohibit advertisement from them, it might be
possible to bypass this protection.

Make this option configurable via UCI, but disabled by default.

Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
(cherry picked from commit 6515887ed9b3f312635409702113dca7c14043e5)

2 years agodnsmasq: backport infinite dns retries fix
Hans Dedecker [Wed, 6 Dec 2017 13:22:59 +0000 (14:22 +0100)]
dnsmasq: backport infinite dns retries fix

If all configured dns servers return refused in response to a query in
strict mode; dnsmasq will end up in an infinite loop retransmitting the
dns query resulting into high CPU load.
Problem is fixed by checking for the end of a dns server list iteration
in strict mode.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2 years agocurl: apply CVE 2017-8816 and 2017-8817 security patches
Stijn Segers [Sun, 3 Dec 2017 11:09:20 +0000 (12:09 +0100)]
curl: apply CVE 2017-8816 and 2017-8817 security patches

This commit adds the upstream patches for CVE 2017-8816 and 2017-8817 to the 17.01
Curl package.

Compile-tested on ar71xx, ramips and x86.

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
2 years agomt76: update to the latest version
Felix Fietkau [Fri, 17 Nov 2017 07:57:13 +0000 (08:57 +0100)]
mt76: update to the latest version

Significant performance/stability improvements for MT76x2 and MT7603.
Adds LED support.

Changes:

2895775 mt76x2: mcu: remove unused parameter in mt76x2_mcu_msg_alloc signature
1dae8f0 mt7603: mcu: remove unused parameter in mt7603_mcu_msg_alloc() signature
5e49aa9 Fix errors found by cppcheck
1b8c8a0 mt7603: add LED definition registers
4d83561 mt76x2: add LED register definitions
2f40e4a mt76x2: Support using PCI ID as chip ID
27c64bc mt76: add led support using mac80211 led framework
dfd64fc mt76x2: init: add ma80211 led callbacks
215edf1 mt7603: init: add ma80211 led callbacks
9d36ff2 mt76x2: Add PCI identifier for MT7602
0b7984e mt7603: remove unnecessary mcu register read function
f5498d2 debugfs: add support for changing the LED pin
8e453b3 mac80211: move DT led configuration to the "led" child node
8f1673a mt76x2: limit client WCID entries to 0-127
f9d9c22 mt76x2: clear drop flag for all WCIDs on init
0dd8b68 mt76x2: clear per-WCID tx rate lookup register
3e5afe7 mt76x2: add helper function for setting drop mask
941555b mt76x2: clear drop mask when sending a PS response
7dfb354 mt76: increase rx ring size for mt76x2
73902dc mt76x2: add rx statistics registers
fe79816 mt76x2: fix LNA gain register annotation
cc588c5 mt76x2: sync channel gain value with latest reference driver
60a4d67 mt76x2: implement dynamic AGC tuning based on false packet detection count
4bc9aa9 mt76x2: add more gain tuning based on the latest reference driver
0a0d16f mt76x2: sync tx power related values with reference driver
8c821aa mac80211: add missing include
82acc85 mt7603: add missing include required on newer kernels
2c1a77c mt76x2: fix transmission of encrypted management frames
0532315 mt76x2: increase OFDM SIFS time
1acde21 mt76x2: add channel argument to eeprom tx power functions
58364a2 mt76x2: initialize channel power limits
c2bd89e mt76x2: convert between per-chain tx power and combined output
e7eaa7c mt7603: rename mt7603_mac_reset to mt7603_pse_reset
ea4c2a1 mt7603: rename MT_PSE_RESET register
c86c3a0 mt7603: remove watchdog reset on interface stop
4490f93 mt7603: remove WARN_ON_ONCE for workaround checks
3075059 mt7603: simplify PSE reset
4ed7e07 mt7603: warn if PSE reset fails
7dc8db1 mt7603: clean up dma debug reads
41e6a04 mt7603: make mt7603_mac_watchdog_reset() static
dc7a351 mt7603: clear wtbl PS bit for powersave responses
123acf2 mt7603: set tx-skip flag for powersave clients
7dd2a9e mt7603: initialize wtbl ps flag on station add
86ddef3 mt76x2: remove some harmless WARN_ONs in tx status and rx path
e326bc2 mt7603: remove some harmless WARN_ONs in rx path

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agotools: patch various gnu tools for macOS 10.13
Ryan Mounce [Thu, 3 Aug 2017 11:07:58 +0000 (20:37 +0930)]
tools: patch various gnu tools for macOS 10.13

These host tools compile but may crash at runtime when building on
macOS 10.13 (High Sierra). Backport upstream gnulib patch until new
releases of affected tools.

https://lists.gnu.org/archive/html/bug-gnulib/2017-07/msg00056.html
https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=c41f233c4c38e84023a16339782ee306f03e7f59

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
2 years agosamba36: backport an upstream fix for an information leak (CVE-2017-15275)
Felix Fietkau [Mon, 4 Dec 2017 08:56:32 +0000 (09:56 +0100)]
samba36: backport an upstream fix for an information leak (CVE-2017-15275)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agoramips: backport MT7628 pinmux fixes
Mathias Kresin [Sat, 18 Nov 2017 20:07:45 +0000 (21:07 +0100)]
ramips: backport MT7628 pinmux fixes

According to the datasheet the REFCLK pin is shared with GPIO#37 and
the PERST pin is shared with GPIO#36.

While at it fix a typo inside the pinmux setup code. The function is called
refclk and not reclk.

Update device tree source files accordingly.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2 years agoramips: add missing reset button for Nexx WT1520
INAGAKI Hiroshi [Sat, 25 Nov 2017 16:42:50 +0000 (01:42 +0900)]
ramips: add missing reset button for Nexx WT1520

This commit adds missing the GPIO key used as reset button.
Nexx WT1520 has a GPIO key for factory reset, but it's not defined in
WT1520.dtsi and cannot use it.

Drop the UART (full) from the device tree source file, it was never
used for this board. Adjust the kernel bootargs accordingly.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[add note about dropped UART (full) to the commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2 years agowireguard: bump to snapshot 20171127
Kevin Darbyshire-Bryant [Mon, 27 Nov 2017 10:14:54 +0000 (10:14 +0000)]
wireguard: bump to snapshot 20171127

== Changes ==

 * compat: support timespec64 on old kernels
 * compat: support AVX512BW+VL by lying
 * compat: fix typo and ranges
 * compat: support 4.15's netlink and barrier changes
 * poly1305-avx512: requires AVX512F+VL+BW

 Numerous compat fixes which should keep us supporting 3.10-4.15-rc1.

 * blake2s: AVX512F+VL implementation
 * blake2s: tweak avx512 code
 * blake2s: hmac space optimization

 Another terrific submission from Samuel Neves: we now have an implementation
 of Blake2s using AVX512, which is extremely fast.

 * allowedips: optimize
 * allowedips: simplify
 * chacha20: directly assign constant and initial state

 Small performance tweaks.

 * tools: fix removing preshared keys
 * qemu: use netfilter.org https site
 * qemu: take shared lock for untarring

 Small bug fixes.

Remove myself from the maintainers list: we have enough and I'm happy to
carry on doing package bumps on ad-hoc basis without the 'official'
title.

Run-tested: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2 years agokernel: bump 4.4 to 4.4.102
Etienne Haarsma [Sun, 26 Nov 2017 11:34:38 +0000 (12:34 +0100)]
kernel: bump 4.4 to 4.4.102

Refreshed all patches.

Removed upstream ramips patch: 0063-set-CM_GCR_BASE_CMDEFTGT_MEM-according-to-datasheet.patch

Compile-tested: ar71xx
Run-tested: ar71xx

Signed-off-by: Etienne Haarsma <bladeoner112@gmail.com>
Tested-by: Stijn Segers <francesco.borromini@inventati.org>
2 years agowireguard: bump to 20171122
Kevin Darbyshire-Bryant [Fri, 24 Nov 2017 10:28:13 +0000 (10:28 +0000)]
wireguard: bump to 20171122

Bump to latest WireGuard snapshot release:

ed479fa (tag: 0.0.20171122) version: bump snapshot
efd9db0 chacha20poly1305: poly cleans up its own state
5700b61 poly1305-x86_64: unclobber %rbp
314c172 global: switch from timeval to timespec
9e4aa7a poly1305: import MIPS64 primitive from OpenSSL
7a5ce4e chacha20poly1305: import ARM primitives from OpenSSL
abad6ee chacha20poly1305: import x86_64 primitives from OpenSSL
6507a03 chacha20poly1305: add more test vectors, some of which are weird
6f136a3 compat: new kernels have netlink fixes
e4b3875 compat: stable finally backported fix
cc07250 qemu: use unprefixed strip when not cross-compiling
64f1a6d tools: tighten up strtoul parsing
c3a04fe device: uninitialize socket first in destruction
82e6e3b socket: only free socket after successful creation of new
df318d1 compat: fix compilation with PaX
d911cd9 curve25519-neon: compile in thumb mode
d355e57 compat: 3.16.50 got proper rt6_get_cookie
666ee61 qemu: update kernel
2420e18 allowedips: do not write out of bounds
185c324 selftest: allowedips: randomized test mutex update
3f6ed7e wg-quick: document localhost exception and v6 rule

Compile-tested-for: ar71xx
Run-tested-on: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2 years agoramips: fix Planex CS-QR10 device packages
Mathias Kresin [Sat, 18 Nov 2017 11:19:00 +0000 (12:19 +0100)]
ramips: fix Planex CS-QR10 device packages

Add kmod-sound-core, it is a dependency of kmod-sound-mt7620 and will
not be autoselected.

Remove kmod-i2c-core, it will be autoselected by kmod-i2c-ralink.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2 years agoramips: fix DCH-M225 support
Mathias Kresin [Sat, 18 Nov 2017 10:59:22 +0000 (11:59 +0100)]
ramips: fix DCH-M225 support

Setting the pins of the uartf group to gpio+i2s at the time the i2c
driver loads is to late for the WPS gpio button.

The gpio-keys driver fails to load since the pin used by the WPS button
is not yet set to GPIO. The WPS button with the rfkill keycode is
essential for this wifi only board.

Add the missing sound and i2c kernel modules corresponding to the
device nodes.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2 years agodnsmasq: load instance-specific conf-file if exists
Emerson Pinter [Wed, 15 Nov 2017 19:20:44 +0000 (17:20 -0200)]
dnsmasq: load instance-specific conf-file if exists

Without this change, the instance-specific conf-file is being added to procd_add_jail_mount,
but not used by dnsmasq.

Signed-off-by: Emerson Pinter <dev@pinter.com.br>
2 years agorpcd: update to version 2017-11-12
Daniel Golle [Fri, 17 Nov 2017 13:42:49 +0000 (14:42 +0100)]
rpcd: update to version 2017-11-12

a0231be8fbc61 fix memory leak in packagelist
4e483312b0216 sys: add packagelist method

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2 years agobrcm47xx: fix switch port mapping on D-Link DIR-330
Antony Black [Thu, 2 Nov 2017 10:53:26 +0000 (13:53 +0300)]
brcm47xx: fix switch port mapping on D-Link DIR-330

D-Link DIR-330 is clone of ASUS WL500GP2, by default conf the WAN port is
eth1, it's not working cus eth1 not soldered and wan port function
performs 5th port of the switch.

Signed-off-by: Antony Black <gtrtfm@gmail.com>
2 years agowireguard: fix portability issue
Felix Fietkau [Sat, 11 Nov 2017 12:15:24 +0000 (13:15 +0100)]
wireguard: fix portability issue

Check if the compiler defines __linux__, instead of assuming that the
host OS is the same as the target OS.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agowireguard: move to kernel build directory
Felix Fietkau [Sat, 11 Nov 2017 12:01:50 +0000 (13:01 +0100)]
wireguard: move to kernel build directory

It builds a kernel module, so its build dir should be target specific

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agowireguard: bump to 0.0.20171111
Kevin Darbyshire-Bryant [Thu, 16 Nov 2017 19:09:33 +0000 (19:09 +0000)]
wireguard: bump to 0.0.20171111

edaad55 (tag: 0.0.20171111) version: bump snapshot
7a989b3 tools: allow for NULL keys everywhere
46f8cbc curve25519: reject deriving from NULL private keys
9b43542 tools: remove ioctl cruft
f6cea8e allowedips: rename from routingtable
23f553e wg-quick: allow for tabs in keys
ab9befb netlink: make sure we reserve space for NLMSG_DONE
73405c0 compat: 4.4.0 has strange ECN function
868be0c wg-quick: stat the correct enclosing folder of config file
ceb11ba qemu: bump kernel version
0a8e173 receive: hoist fpu outside of receive loop
bee188a qemu: more debugging
f1fdd8d device: wait for all peers to be freed before destroying
2188248 qemu: check for memory leaks
c77a34e netlink: plug memory leak
0ac8efd device: please lockdep
a51e196 global: revert checkpatch.pl changes
65c49d7 Kconfig: remove trailing whitespace

Compile-tested-for: ar71xx
Run-tested-on: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2 years agoprocd: update to latest git HEAD (fixes and improvements)
Hans Dedecker [Wed, 15 Nov 2017 21:07:06 +0000 (22:07 +0100)]
procd: update to latest git HEAD (fixes and improvements)

d9dc0e0 service: fix calls to blobmsg_parse()
5db8f70 procd: add missing new lines inside debug code
8d5d29c service: fix SERVICE_ATTR_NAME usage in service_handle_set

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2 years agoopenssl: update to 1.0.2m
Peter Wagner [Thu, 9 Nov 2017 23:35:35 +0000 (00:35 +0100)]
openssl: update to 1.0.2m

don't set no-ssl3-method when CONFIG_OPENSSL_WITH_SSL3 di disabled otherwise the compile breaks with this error:

../libssl.so: undefined reference to `SSLv3_client_method'

Fixes CVE: CVE-2017-3735, CVE-2017-3736

Signed-off-by: Peter Wagner <tripolar@gmx.at>
2 years agobrcm47xx: fix switch port mapping on Asus RT-N12 and RT-N16 models
Jo-Philipp Wich [Wed, 19 Jul 2017 08:39:10 +0000 (10:39 +0200)]
brcm47xx: fix switch port mapping on Asus RT-N12 and RT-N16 models

On Asus RT-N12 and RT-N16 models, the WAN and LAN4 ports are swapped in the
initial switch configuration since the presets present in nvram appear to be
wrong.

Add special casing for these models to detect_by_model() in order to ensure
a proper switch configuration.

Fixes FS#502.

(cherry picked from commit 96ed69101da254b0cb61a0dfc42bd48d27bfacb9
  and squashed with commit f2fdd68664cdf09075e6f18b20946e41a22284b2)

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2 years agorpcd: update to the latest version from 2017-11-09
Rafał Miłecki [Thu, 9 Nov 2017 16:27:41 +0000 (17:27 +0100)]
rpcd: update to the latest version from 2017-11-09

9a8640183c031 plugin: use RTLD_LOCAL instead of RTLD_GLOBAL when loading library

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2 years agomountd: bump to git HEAD version (optimization fixes)
Hans Dedecker [Thu, 9 Nov 2017 17:04:58 +0000 (18:04 +0100)]
mountd: bump to git HEAD version (optimization fixes)

7826ca5 mount: add mount with ignore=1 for unsupported filesystems
75e7412 mount: drop duplicated filesystem check from mount_add_list

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2 years agofunctions.sh: fix default_postinst function
Marko Ratkaj [Tue, 7 Nov 2017 05:48:09 +0000 (06:48 +0100)]
functions.sh: fix default_postinst function

When we run "opkg install" on a package that installs an uci-defaults
script, functions.sh will fail to evaluate that script in its
default_postinst function.

This happens because there is no "./" present and it searches for the
file in paths specified by the PATH variable. This would work on bash,
but it will not work on ash and some other shells like sh, zsh. This
applys to the ". filename" directive used in this case.

This patch will make the path relative to the /etc/uci-defaults
directory.

Fixes: FS#1021

Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
2 years agowireguard: version bump to 0.0.20171101
Kevin Darbyshire-Bryant [Fri, 3 Nov 2017 17:01:32 +0000 (17:01 +0000)]
wireguard: version bump to 0.0.20171101

Update wireguard to latest snapshot:

9fc5daf version: bump snapshot
748ca6b compat: unbreak unloading on kernels 4.6 through 4.9
7be9894 timers: switch to kees' new timer_list functions
6be9a66 wg-quick: save all hooks on save
752e7af version: bump snapshot
2cd9642 wg-quick: fsync the temporary file before renaming
b139499 wg-quick: allow for saving existing interface
582c201 contrib: add reresolve-dns
8e04be1 tools: correct type for CTRL_ATTR_FAMILY_ID
c138276 wg-quick: allow for the hatchet, but not by default
d03f2a0 global: use fewer BUG_ONs
6d681ce timers: guard entire setting in block
4bf32ca curve25519: only enable int128 if compiler support is sound
86e06a3 device: expand scope of destruct lock
e3661ab global: get rid of useless forward declarations
bedc77a device: only take reference if netns is different
7c07e22 wg-quick: remember to rewind DNS settings on failure
2352ec0 wg-quick: allow specifiying multiple hooks
573cb19 qemu: test using four cores
e09ec4d global: style nits
4d3deae qemu: work around ccache bugs
7491cd4 global: infuriating kernel iterator style
78e079c peer: store total number of peers instead of iterating
d4e2752 peer: get rid of peer_for_each magic
6cf12d1 compat: be sure to include header before testing
3ea08d8 qemu: allow for cross compilation
d467551 crypto/avx: make sure we can actually use ymm registers
c786c46 blake2: include headers for macros
328e386 global: accept decent check_patch.pl suggestions
a473592 compat: fix up stat calculation for udp tunnel
9d930f5 stats: more robust accounting
311ca62 selftest: initialize mutex in routingtable selftest
8a9a6d3 netns: use time-based test instead of quantity-based
e480068 netns: use read built-in instead of ncat hack for dmesg

Compile-tested-for: ar71xx
Run-tested-on: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2 years agoar71xx: fix LED config for DIR-869 A1
Florian Beier [Wed, 25 Oct 2017 18:12:24 +0000 (20:12 +0200)]
ar71xx: fix LED config for DIR-869 A1

This fixes the LED configuration for the D-Link DIR-869 A1. In order to
support the device I probed around using an initramfs image for the
UniFi AC. Pulling GPIO 15 to low enabled the LEDs while high disabled them.
GPIO 16 set to low meant that the color was white while pulling it to high
made the color change to orange. The past code was written based upon these
findings.
However, running a flashed image I now discovered that GPIO 15 controls the
orange LEDs while GPIO 16 controls the white ones and that both are active
when low. This means that the GPIOs were inverted and one active_low was set
wrong which this patch fixes.

Behavior of the LED front after this patch is applied:

cat /sys/devices/platform/leds-gpio/leds/d-link:white:status/brightness
0   -> white LEDs are OFF
255 -> white LEDs are ON

cat /sys/devices/platform/leds-gpio/leds/d-link:orange:status/brightness
0   -> orange LEDs are OFF
255 -> orange LEDs are ON

If the brightness of both is set to 255 the LED front will be white.
If the brightness of both is set to 0 the LED front will be off.

Signed-off-by: Florian Beier <beier.florian@gmail.com>
2 years agoipq806x: nbg6817: sync MAC addresses to the upstream values
Stefan Lippers-Hollmann [Mon, 30 Oct 2017 03:28:34 +0000 (04:28 +0100)]
ipq806x: nbg6817: sync MAC addresses to the upstream values

The ZyXEL NBG6817 calculates all MAC addresses based on the ethaddr
value stored in the U-Boot environment (0:APPSBLENV). No MAC addresses
are stored in the ART partition and the generated MAC addresses for the
wlan interfaces alternate randomly between 12:34:56:78:90:12 and
00:03:7f:12:34:56.

interface   new/ OEM MAC old MAC

wlan-2.4g (phy1): ethaddr undefined
wlan-5g   (phy0): ethaddr + 1 undefined
lan             : ethaddr + 2 ethaddr
wan             : ethaddr + 3 ethaddr + 1

This patch defines stable MAC addresses for the wlan interfaces for
the first time instead of generating them at random. The previously
defined values for lan/ wan are changed to follow the settings of the
OEM firmware.

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
2 years agoipq806x: nbg6817: add kmod-fs-ext4 to device packages
Stefan Lippers-Hollmann [Thu, 19 Oct 2017 19:40:26 +0000 (21:40 +0200)]
ipq806x: nbg6817: add kmod-fs-ext4 to device packages

The ZyXEL NBG6817 uses an eMMC flash for the rootfs, which is split
into the readonly squashfs and ext4 for the overlay. This adds the
required package to the device packages to allow mounting the overlay
by default.

/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/loop0 on /overlay type ext4 (rw,noatime,data=ordered)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
mountd(pid1040) on /tmp/run/blockd type autofs (rw,relatime,fd=7,pgrp=1,timeout=30,minproto=5,maxproto=5,indirect)

Before this commit, the ext4 based overlayfs could not be mounted,
which left only the tmpfs based/ volatile  emergency overlay in place.

Fixes: https://forum.lede-project.org/t/zyxel-nbg6817-flashing-from-oem/768

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
2 years agouclient: update to the latest version, fixes fetch of multiple files
Felix Fietkau [Thu, 2 Nov 2017 21:53:12 +0000 (22:53 +0100)]
uclient: update to the latest version, fixes fetch of multiple files

4b87d83 uclient-fetch: fix overloading of output_file variable

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2 years agoramips: fix Youku-YK1 support
Edmunt Pienkowsky [Sat, 21 Oct 2017 09:07:43 +0000 (11:07 +0200)]
ramips: fix Youku-YK1 support

Remove the ephy-pins from the ethernet device tree node. The ephy-pins
are useed to controll the ePHY LEDs and this board doesn't have these.
Instead one of the ePHY pins is used in GPIO mode to control the WAN
LED.

Use the switch LED trigger to control the WAN LED. Move the power LED
handling to diag.sh to show the boot status via this LED.

Add the missing kernel packages for USB and microSD card reader to the
default package selection.

Fix the maximum image size value. The board has a 32MByte flash chip.

Fixes: FS#1055

Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
[make the commit message more verbose, remove GPIO pinmux for pins not
used as GPIOs]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2 years agotools/squashfs4: include sysmacros.h explicitly
Alex Maclean [Mon, 23 Oct 2017 12:48:19 +0000 (13:48 +0100)]
tools/squashfs4: include sysmacros.h explicitly

glibc is moving to remove the include of sys/sysmacros.h from
sys/types.h, and some distros have done this early. Other libcs may
already lack this include. Include sysmacros.h explicitly.

Fixes: FS#1017

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
[refresh patches]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2 years agotools/squashfs: include sysmacros.h explicitly
Alex Maclean [Mon, 23 Oct 2017 12:47:55 +0000 (13:47 +0100)]
tools/squashfs: include sysmacros.h explicitly

glibc is moving to remove the include of sys/sysmacros.h from
sys/types.h, and some distros have done this early. Other libcs may
already lack this include. Include sysmacros.h explicitly.

Fixes: FS#1018

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2 years agotools/mtd-utils: include sysmacros.h explicitly
Alex Maclean [Mon, 23 Oct 2017 12:47:33 +0000 (13:47 +0100)]
tools/mtd-utils: include sysmacros.h explicitly

glibc is moving to remove the include of sys/sysmacros.h from
sys/types.h, and some distros have done this early. Other libcs may
already lack this include. Include sysmacros.h explicitly.

Fixes: FS#1015

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
[refresh patches]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2 years agotools/findutils: include sysmacros.h explicitly
Alex Maclean [Mon, 23 Oct 2017 12:43:43 +0000 (13:43 +0100)]
tools/findutils: include sysmacros.h explicitly

glibc is moving to remove the include of sys/sysmacros.h from
sys/types.h, and some distros have done this early. Other libcs may
already lack this include. Include sysmacros.h explicitly.

Fixes: FS#1016

Signed-off-by: Alex Maclean <monkeh@monkeh.net>