5 years agoubus: update to the latest version
Felix Fietkau [Sun, 22 Jan 2017 13:37:24 +0000 (14:37 +0100)]
ubus: update to the latest version

Adds uloop related libubus fixes

Signed-off-by: Felix Fietkau <>
5 years agoubus: update to the latest version
Felix Fietkau [Fri, 20 Jan 2017 10:34:26 +0000 (11:34 +0100)]
ubus: update to the latest version

- Adds support for passing file descriptors in ubus invoke requests
- Fixes clearing pending timers on ubus_shutdown()
- Fixes checking the amount of written data in ubusd
- Fixes an ubusd crash when trying to subscribe to system objects

Signed-off-by: Felix Fietkau <>
5 years agokernel: ar8327/ar8337: disable ARL access code to avoid lockups (FS#384)
Jo-Philipp Wich [Fri, 13 Jan 2017 15:38:22 +0000 (16:38 +0100)]
kernel: ar8327/ar8337: disable ARL access code to avoid lockups (FS#384)

Running ar8327_get_arl_entry() early after boot leads to MDIO related system
lockups on several devices using this driver.

Since dumping the ARL table contens is an optional, uncritical feature, simply
disable the code for now.

Signed-off-by: Jo-Philipp Wich <>
5 years agobcm53xx: fix LAN MAC address for devices that use eth2 originally
Rafał Miłecki [Tue, 31 Jan 2017 12:53:46 +0000 (13:53 +0100)]
bcm53xx: fix LAN MAC address for devices that use eth2 originally

We override default Ethernet interface with eth0 which often uses random
MAC due to missing proper NVRAM entry. Fix this by manually assigning
MAC in the config.

Signed-off-by: Rafał Miłecki <>
5 years agoar71xx: add missing DEVICE_TITLE for mikrotik devices
Felix Fietkau [Sun, 29 Jan 2017 16:32:40 +0000 (17:32 +0100)]
ar71xx: add missing DEVICE_TITLE for mikrotik devices

Signed-off-by: Felix Fietkau <>
5 years agoar71xx: Fix mikrotik subtarget default profile for device profile selection
Alex Samorukov [Sun, 22 Jan 2017 17:56:37 +0000 (17:56 +0000)]
ar71xx: Fix mikrotik subtarget default profile for device profile selection

Signed-off-by: Alex Samorukov <>
5 years agoar71xx: improve Mikrotik hAP Lite device support
Alex Samorukov [Thu, 19 Jan 2017 14:38:49 +0000 (15:38 +0100)]
ar71xx: improve Mikrotik hAP Lite device support

- enable jffs2 support
- fix sysupgrade

Signed-off-by: Alex Samorukov <>
5 years agoar71xx: mark soft_config mtd part as writeable for RB-941-2nD
Thibaut VARENE [Wed, 18 Jan 2017 09:44:19 +0000 (10:44 +0100)]
ar71xx: mark soft_config mtd part as writeable for RB-941-2nD

The soft_config partition must be writeable for rbcfg to be able to
enact changes to the routerboot configuration.
The read-only flag was a mistake in the initial patch. Removing it
brings mach-rb941.c in line with all other RB platforms.

Signed-off-by: Thibaut VARENE <>
5 years agoar71xx: fix up the kernel config for the mikrotik subtarget
Felix Fietkau [Tue, 10 Jan 2017 17:09:22 +0000 (18:09 +0100)]
ar71xx: fix up the kernel config for the mikrotik subtarget

Limit enabled devices to routerboards, disable all other devices

Signed-off-by: Felix Fietkau <>
5 years agoar71xx: fix network config for Mikrotik RB411U
Cezary Jackiewicz [Mon, 9 Jan 2017 21:06:12 +0000 (22:06 +0100)]
ar71xx: fix network config for Mikrotik RB411U

Mikrotik RB411U has only one ethernet port - eth0. This patch allows to create
correct config with one lan section.

Signed-off-by: Cezary Jackiewicz <>
5 years agoar71xx: add support for RB-941-2nD
Thibaut VARENE [Wed, 4 Jan 2017 21:44:54 +0000 (22:44 +0100)]
ar71xx: add support for RB-941-2nD

Add full support for Mikrotik RB-941-2nD (hAP lite)

Original patch by Sergey Sergeev <> and
more information is available here:
I updated and adapted the patch to apply cleanly to LEDE trunk
and added proper numbering for the switch ports (matching case
Tested working on actual hardware with the information
provided in the above webpage. Sysupgrade works.

Signed-off-by: Thibaut VARENE <>
Signed-off-by: Felix Fietkau <>
5 years agoar71xx: convert mikrotik routerboard support to UBI
Felix Fietkau [Sun, 8 Jan 2017 13:27:38 +0000 (14:27 +0100)]
ar71xx: convert mikrotik routerboard support to UBI

Remove the wget2nand script, drop the need for manual installation,
use sysupgrade instead.

There are now two different NAND images, one for 64 MiB flashes, the
other for >= 128 MiB

Signed-off-by: Felix Fietkau <>
5 years agoar71xx: create a proper default profile for the mikrotik subtarget, drop other profiles
Felix Fietkau [Sat, 7 Jan 2017 19:54:42 +0000 (20:54 +0100)]
ar71xx: create a proper default profile for the mikrotik subtarget, drop other profiles

Signed-off-by: Felix Fietkau <>
5 years agotools: update kernel2minor to 0.24 version
Sergey Sergeev [Tue, 24 Jan 2017 13:04:18 +0000 (16:04 +0300)]
tools: update kernel2minor to 0.24 version

Signed-off-by: Sergey Sergeev <>
5 years agobase-files: don't overwrite model name set by target
Mathias Kresin [Sat, 28 Jan 2017 15:19:35 +0000 (16:19 +0100)]
base-files: don't overwrite model name set by target

The condition is always true due to the literal string followed the
-n test parameter. A model name set by target scripts always gets
overwritten this way.

Change the condition to check for an already existing destination file
as it was before 5e85ae9 ("base-files: fix error message during boot").

Signed-off-by: Mathias Kresin <>
5 years agomt76: update to the latest version
Felix Fietkau [Tue, 31 Jan 2017 20:28:28 +0000 (21:28 +0100)]
mt76: update to the latest version

Fixes DFS detection false positive issues

Signed-off-by: Felix Fietkau <>
5 years agokernel: update bcma to fix devm memory leaks
Rafał Miłecki [Tue, 31 Jan 2017 13:21:53 +0000 (14:21 +0100)]
kernel: update bcma to fix devm memory leaks

Signed-off-by: Rafał Miłecki <>
5 years agoath9k: remove the deaf rx path state check patch
Felix Fietkau [Tue, 31 Jan 2017 10:38:25 +0000 (11:38 +0100)]
ath9k: remove the deaf rx path state check patch

This needs to be refined and reworked before we can safely leave it
enabled by default

Signed-off-by: Felix Fietkau <>
5 years agomdns: update to the latest version
Felix Fietkau [Tue, 31 Jan 2017 10:23:02 +0000 (11:23 +0100)]
mdns: update to the latest version

- fixes unaligned acccesses, causing DNS parsing issues on ARMv5
- fixes service timeout handling

Signed-off-by: Felix Fietkau <>
5 years fix detecting download errors with curl
Felix Fietkau [Tue, 31 Jan 2017 10:22:21 +0000 (11:22 +0100)] fix detecting download errors with curl

Avoid treating error pages as successfully downloaded content

Signed-off-by: Felix Fietkau <>
5 years agoramips: add missing DTS pcie node for WSR-600
Felix Fietkau [Tue, 31 Jan 2017 09:27:25 +0000 (10:27 +0100)]
ramips: add missing DTS pcie node for WSR-600

Enables PCI bus and support for the MT7603 and RT5592 chips

Signed-off-by: Felix Fietkau <>
5 years agoqemu: rename internal crypto/aes symbols
Stijn Tintel [Mon, 30 Jan 2017 16:47:11 +0000 (17:47 +0100)]
qemu: rename internal crypto/aes symbols

Qemu's local AES code defines symbols that conflict with
LibreSSL/OpenSSL's libcrypto. Rename them to avoid build problems.

See upstream commit c8d70e59738e672021926c7747af8ef9dea15c82.

Fixes FS#444.

Signed-off-by: Stijn Tintel <>
5 years agotools/qemu: use default host configure rule ; set appropriate vars & args
Alexandru Ardelean [Mon, 9 Jan 2017 12:46:18 +0000 (14:46 +0200)]
tools/qemu: use default host configure rule ; set appropriate vars & args

Admittedly, this is my own OCD wanting to get rid of this.

Because I tried (a while back to upgrade QEMU to a newer version),
and (during that attempt) I tried to get rid of this.

Tested on Linux & Mac.

Signed-off-by: Alexandru Ardelean <>
5 years agolantiq: fix unaligned access in xrx200_poll_rx()
Alexander Couzens [Sat, 28 Jan 2017 16:23:16 +0000 (17:23 +0100)]
lantiq: fix unaligned access in xrx200_poll_rx()

Signed-off-by: Alexander Couzens <>
5 years agoledtrig-netdev: don't cancel work on events for different interfaces
Sergey Sergeev [Sun, 29 Jan 2017 16:01:40 +0000 (19:01 +0300)]
ledtrig-netdev: don't cancel work on events for different interfaces

This fixes logic bug(in function netdev_trig_notify) introduced in
0b2991a8ed32b5d9ba0a7c3441a72e1c1a1c4fde commit.
Events triggered by different interfaces were stopping work queue so it
wasn't working for tx/rx mode.

Signed-off-by: Sergey Sergeev <>
5 years agokmod-sched-core: Add HTB and TBF traffic shapers
Toke Høiland-Jørgensen [Fri, 20 Jan 2017 12:13:35 +0000 (13:13 +0100)]
kmod-sched-core: Add HTB and TBF traffic shapers

HTB and TBF are the basic traffic shapers used by sqm-scripts. Moving
these into kmod-sched-core enables sqm-scripts to downgrade its
dependency from kmod-sched to kmod-sched-core, potentially making it
useful on devices with smaller flash sizes.

This adds around 30k to the size of kmod-sched-core (20k for sch_htb.ko
and 10k for sch_tbf.ko).

Signed-off-by: Toke Høiland-Jørgensen <>
5 years agoar71xx: prepare jffs2 partition properly in factory.bin for BHR-4GRV2
FUKAUMI Naoki [Fri, 9 Dec 2016 08:53:15 +0000 (17:53 +0900)]
ar71xx: prepare jffs2 partition properly in factory.bin for BHR-4GRV2

"pad-rootfs" is required just after "append-rootfs".

Signed-off-by: FUKAUMI Naoki <>
5 years agomxs: remove stale references to obsolete kernel module packages
Michael Heimpold [Sat, 28 Jan 2017 15:32:34 +0000 (16:32 +0100)]
mxs: remove stale references to obsolete kernel module packages

Commit 29443e2 (mxs: remove, select drivers in the kernel config)
missed to remove these references, so cleanup it now.

Signed-off-by: Michael Heimpold <>
5 years agoopenvpn: add support for various new 2.4 configuration options
Magnus Kroken [Mon, 16 Jan 2017 21:56:03 +0000 (22:56 +0100)]
openvpn: add support for various new 2.4 configuration options

Updates to openvpn.init were included in early OpenVPN 2.4 patch
series, but got lost along the way and were never merged.

Signed-off-by: Magnus Kroken <>
5 years agokernel: backport support for BCM54210E PHY
Rafał Miłecki [Sat, 28 Jan 2017 17:51:57 +0000 (18:51 +0100)]
kernel: backport support for BCM54210E PHY

Signed-off-by: Rafał Miłecki <>
5 years agokernel: backport support for BCM54810 PHY
Rafał Miłecki [Sat, 28 Jan 2017 17:44:23 +0000 (18:44 +0100)]
kernel: backport support for BCM54810 PHY

Signed-off-by: Rafał Miłecki <>
5 years agokernel: backport support for BCM54612E PHY
Rafał Miłecki [Sat, 28 Jan 2017 16:33:56 +0000 (17:33 +0100)]
kernel: backport support for BCM54612E PHY

Signed-off-by: Rafał Miłecki <>
5 years agoopenssl: update to version 1.0.2k
Hauke Mehrtens [Fri, 27 Jan 2017 22:36:45 +0000 (23:36 +0100)]
openssl: update to version 1.0.2k

This fixes the following security problems:
CVE-2017-3731: Truncated packet could crash via OOB read
CVE-2017-3732: BN_mod_exp may produce incorrect results on x86_64
CVE-2016-7055: Montgomery multiplication may produce incorrect results

Signed-off-by: Hauke Mehrtens <>
5 years agolantiq: fix brnImage signature for the VGV7510KW22BRN images
Mathias Kresin [Sat, 28 Jan 2017 11:36:15 +0000 (12:36 +0100)]
lantiq: fix brnImage signature for the VGV7510KW22BRN images

The VGV7510KW22BRN and VGV7519BRN do not have the same brnImage
signature. It was accidentally changed with ba42c1d ("lantiq: un-macro
the image building code").

Signed-off-by: Mathias Kresin <>
5 years agoath9k: fix up a refcount imbalance error in the IRQ related fix
Felix Fietkau [Fri, 27 Jan 2017 14:43:12 +0000 (15:43 +0100)]
ath9k: fix up a refcount imbalance error in the IRQ related fix

Signed-off-by: Felix Fietkau <>
5 years agoprocd: update to latest git HEAD
Matthias Schiffer [Thu, 26 Jan 2017 15:18:41 +0000 (16:18 +0100)]
procd: update to latest git HEAD

0f58977 init: fix /tmp permissions on zram

Signed-off-by: Matthias Schiffer <>
5 years agobase-files: fix user creation on sysupgrade with few opkg control files
Matthias Schiffer [Tue, 24 Jan 2017 17:55:13 +0000 (18:55 +0100)]
base-files: fix user creation on sysupgrade with few opkg control files

If only a single opkg control file exists (which can happen with
CONFIG_CLEAN_IPKG), grep would not print the file name by default. Instead
of forcing it using -H, we just switch to -l (print only file names) and
get rid of the cut.

Add -s to suppress an error message when no control files exist.

Signed-off-by: Matthias Schiffer <>
5 years agoinclude/ keep Require-User lines with CONFIG_CLEAN_IPKG
Matthias Schiffer [Tue, 24 Jan 2017 16:00:43 +0000 (17:00 +0100)]
include/ keep Require-User lines with CONFIG_CLEAN_IPKG

Require-User is handled by /etc/uci-defaults/13_fix_group_user on first
boot, so we need to keep these when removing all opkg data with

Signed-off-by: Matthias Schiffer <>
5 years agoimagebuilder: properly escape single quotes in device titles
Jo-Philipp Wich [Thu, 26 Jan 2017 09:13:23 +0000 (10:13 +0100)]
imagebuilder: properly escape single quotes in device titles

The name "Plat'Home OpenBlocks AX3" causes the imagebuilders "make info"
command to fail with:

    bash: -c: line 0: syntax error near unexpected token `('
    bash: -c: line 0: `echo;  [...]'
    Makefile:99: recipe for target '_call_info' failed

Properly escape single quotes to avoid breaking the echo commands.

Signed-off-by: Jo-Philipp Wich <>
5 years agoath9k: add stability fixes for long standing hang issues (FS#13, #34, #373, #383)
Felix Fietkau [Wed, 25 Jan 2017 14:32:18 +0000 (15:32 +0100)]
ath9k: add stability fixes for long standing hang issues (FS#13, #34, #373, #383)

The radio would stop communicating completely. This issue was easiest to
trigger on AR913x devices, e.g. the TP-Link TL-WR1043ND, but other
hardware was occasionally affected as well.

The most critical issue was a race condition in disabling/enabling IRQs
between the IRQ handler and the IRQ processing tasklet

Signed-off-by: Felix Fietkau <>
5 years agomac80211: refresh patch
Felix Fietkau [Wed, 25 Jan 2017 14:31:51 +0000 (15:31 +0100)]
mac80211: refresh patch

Signed-off-by: Felix Fietkau <>
5 years agoAdd back the commit "ath9k: Add airtime fairness scheduler"
Felix Fietkau [Tue, 24 Jan 2017 14:23:30 +0000 (15:23 +0100)]
Add back the commit "ath9k: Add airtime fairness scheduler"

This reverts commit c296ba834db4ce8c71e0ad7030aab188fe60b27b.
According to several reports, the issues with the airtime fairness
changes are gone in current versions.
It's time to re-apply the patch now.

Signed-off-by: Felix Fietkau <>
5 years agobcm53xx: disable building Linksys EA6300 V1 image
Rafał Miłecki [Wed, 25 Jan 2017 09:48:51 +0000 (10:48 +0100)]
bcm53xx: disable building Linksys EA6300 V1 image

This device has 2 TRX partitions (main one and failsafe one) and Linux
may not detect them properly failing to run userspace.

Signed-off-by: Rafał Miłecki <>
5 years agox86: fix sysupgrades on disks with 4k block size
Felix Fietkau [Wed, 25 Jan 2017 07:13:11 +0000 (08:13 +0100)]
x86: fix sysupgrades on disks with 4k block size

Even when the disk uses 4k blocks, the partition table still uses units
of 512 byte sectors. Always use ibs=512 for the offsets

Signed-off-by: Felix Fietkau <>
5 years agomac80211: brcmfmac: don't use uninitialize mem for country codes
Rafał Miłecki [Tue, 24 Jan 2017 15:54:09 +0000 (16:54 +0100)]
mac80211: brcmfmac: don't use uninitialize mem for country codes

There was a bug in brcmfmac patch that could result in treating random
memory as source of country codes.

Signed-off-by: Rafał Miłecki <>
5 years agomac80211: move (& update) upstream accepted brcmfmac patches
Rafał Miłecki [Tue, 17 Jan 2017 21:41:18 +0000 (22:41 +0100)]
mac80211: move (& update) upstream accepted brcmfmac patches

These 3 patches are now in wireless-drivers-next tree.

Signed-off-by: Rafał Miłecki <>
5 years agobrcm47xx: backport arch patch with Luxul devices support
Rafał Miłecki [Tue, 24 Jan 2017 19:22:14 +0000 (20:22 +0100)]
brcm47xx: backport arch patch with Luxul devices support

Signed-off-by: Rafał Miłecki <>
5 years agopackages: mark packages depending on a target as nonshared
Mathias Kresin [Thu, 19 Jan 2017 08:18:57 +0000 (09:18 +0100)]
packages: mark packages depending on a target as nonshared

The packages can't be build as shared packages due to the unmet

Fixes FS#418.

Signed-off-by: Mathias Kresin <>
5 years agosdk: explicitely remove ccache directories when packing SDK
Jo-Philipp Wich [Tue, 24 Jan 2017 14:29:20 +0000 (15:29 +0100)]
sdk: explicitely remove ccache directories when packing SDK

Upon first invocation, the ccache program will create the required directory
hierarchy so there is no point in shipping these empty directories.

Removing those paths also avoids shipping dangling symlinks in case the
directories got linked elsewhere, e.g. into a shared global cache.

Signed-off-by: Jo-Philipp Wich <>
5 years agolantiq: remove CPU_TYPE:=mips32r2, it gets overwritten anyway
Felix Fietkau [Tue, 24 Jan 2017 12:33:45 +0000 (13:33 +0100)]
lantiq: remove CPU_TYPE:=mips32r2, it gets overwritten anyway

Signed-off-by: Felix Fietkau <>
5 years agox86: unify CPU_TYPE for legacy and geode
Felix Fietkau [Tue, 24 Jan 2017 12:11:43 +0000 (13:11 +0100)]
x86: unify CPU_TYPE for legacy and geode

According to some reports, -march=pentium-mmx is a better choice for
older Geode CPUs than -march=geode anyway.

Bump the minimum architecture of the legacy target from i486 to
pentium-mmx. Anything older is not worth supporting anyway.

Signed-off-by: Felix Fietkau <>
5 years agouml: mark as source-only
Felix Fietkau [Tue, 24 Jan 2017 11:44:59 +0000 (12:44 +0100)]
uml: mark as source-only

Get rid of a special case in the buildbot script

Signed-off-by: Felix Fietkau <>
5 years agomalta: mark as source-only to avoid wasting build resources
Felix Fietkau [Tue, 24 Jan 2017 11:41:40 +0000 (12:41 +0100)]
malta: mark as source-only to avoid wasting build resources

The le64 and be64 subtargets do not share a package architecture with
any other targets, so they are pretty wasteful for a development-only

Signed-off-by: Felix Fietkau <>
5 years agomalta: move FEATURES to the target makefile
Felix Fietkau [Tue, 24 Jan 2017 11:41:19 +0000 (12:41 +0100)]
malta: move FEATURES to the target makefile

Signed-off-by: Felix Fietkau <>
5 years agobuild: remove mips16 feature flag from target makefiles
Felix Fietkau [Tue, 24 Jan 2017 11:40:00 +0000 (12:40 +0100)]
build: remove mips16 feature flag from target makefiles

It can be implicitly derived from the MIPS32 revision support in the
kernel configuration

Signed-off-by: Felix Fietkau <>
5 years agobuild: remove obsolete mips32r2 CPU_TYPE
Felix Fietkau [Tue, 24 Jan 2017 11:30:26 +0000 (12:30 +0100)]
build: remove obsolete mips32r2 CPU_TYPE

Signed-off-by: Felix Fietkau <>
5 years agoramips/rt288x: switch CPU_TYPE to 24kc
Felix Fietkau [Tue, 24 Jan 2017 11:25:05 +0000 (12:25 +0100)]
ramips/rt288x: switch CPU_TYPE to 24kc

While rt288x only has a MIPS 4KEc processor, it implements the MIPS32r2
architecture just like the 24Kc, so the instruction set should be 100%
Switching it to 24kc allows it to share the package architecture with a
lot of other targets instead of creating a special case, saving
buildbot resources.

Signed-off-by: Felix Fietkau <>
5 years agox86: remove the xen_domu subtarget
Felix Fietkau [Fri, 13 Jan 2017 14:04:17 +0000 (15:04 +0100)]
x86: remove the xen_domu subtarget

Signed-off-by: Felix Fietkau <>
5 years agox86/generic: add xen DomU support
Felix Fietkau [Fri, 13 Jan 2017 14:03:24 +0000 (15:03 +0100)]
x86/generic: add xen DomU support

Copy the relevant config options from the xen_domu subtarget

Signed-off-by: Felix Fietkau <>
5 years agohostapd: fix stray "out of range" shell errors in
Jo-Philipp Wich [Mon, 23 Jan 2017 13:52:27 +0000 (14:52 +0100)]
hostapd: fix stray "out of range" shell errors in

The hostapd_append_wpa_key_mgmt() procedure uses the possibly uninitialized
$ieee80211r and $ieee80211w variables in a numerical comparisation, leading
to stray "netifd: radio0 (0000): sh: out of range" errors in logread when
WPA-PSK security is enabled.

Ensure that those variables are substituted with a default value in order to
avoid emitting this (harmless) shell error.

Signed-off-by: Jo-Philipp Wich <>
5 years agoopenvpn: let all openvpn variants provide a virtual openvpn package
Jo-Philipp Wich [Sat, 21 Jan 2017 22:03:36 +0000 (23:03 +0100)]
openvpn: let all openvpn variants provide a virtual openvpn package

Add PROVIDES:=openvpn to the default recipe in order to let all build variants
provide a virtual openvpn package.

The advantage of this approach is that downstream packages can depend on just
"openvpn" without having to require a specific flavor.

Signed-off-by: Jo-Philipp Wich <>
5 years agokmod-sched-cake: fix parameter passing kernel/user space
Kevin Darbyshire-Bryant [Fri, 23 Dec 2016 16:46:45 +0000 (16:46 +0000)]
kmod-sched-cake: fix parameter passing kernel/user space

The last two parameters passed between user space tc and kernel space
sched-cake were transposed due to a merge mistake in a parameter header

As such, using a packet overhead figure was likely to set cake to wash
packet DSCP values.  Similarly, the DSCP wash flag was used as an offset
to the displayed packet overhead value.

Signed-off-by: Kevin Darbyshire-Bryant <>
5 years agozlib: Update to 1.2.11
Daniel Engberg [Sun, 15 Jan 2017 20:46:27 +0000 (21:46 +0100)]
zlib: Update to 1.2.11

Update to 1.2.11 as suggested by upstream
Also add SF as primary source and main site as fallback

Note: SF doesn't carry the 1.2.11 update yet.

Signed-off-by: Daniel Engberg <>
5 years agolede-keyring: bundle latest usign certificates
Jo-Philipp Wich [Fri, 20 Jan 2017 09:09:30 +0000 (10:09 +0100)]
lede-keyring: bundle latest usign certificates

Includes the public usign certificates used by the 17.01.* release builds.

Signed-off-by: Jo-Philipp Wich <>
5 years agosdk: fix Git URL detection
Jo-Philipp Wich [Fri, 20 Jan 2017 08:51:38 +0000 (09:51 +0100)]
sdk: fix Git URL detection

Instead of relying on complex sed patterns that trip up make syntax rules, use
GNU Makes builtin filter function to match desired URLs.

Signed-off-by: Jo-Philipp Wich <>
5 years agosdk: avoid using private repository clone urls as base repo entry
Jo-Philipp Wich [Thu, 19 Jan 2017 19:41:46 +0000 (20:41 +0100)]
sdk: avoid using private repository clone urls as base repo entry

Only consider the repository origin url as valid base feed entry if it is a
git://, http:// or https:// location.

Signed-off-by: Jo-Philipp Wich <>
5 years agolantiq: fix an ethernet stability issue triggered by receving packets during boot
Felix Fietkau [Thu, 19 Jan 2017 13:25:09 +0000 (14:25 +0100)]
lantiq: fix an ethernet stability issue triggered by receving packets during boot

Disabling ethernet during reboot (only to enable it again when the
ethernet driver attaches) can put the chip into a faulty state where it
corrupts the header of all incoming packets.

This happens if packets arrive during the time window where the core is
disabled, and it can be easily reproduced by rebooting while sending a
flood ping to the broadcast address.

Signed-off-by: Felix Fietkau <>
5 years agolantiq: fix spurious irq storm
Felix Fietkau [Thu, 19 Jan 2017 11:31:34 +0000 (12:31 +0100)]
lantiq: fix spurious irq storm

Since the MIPS IRQ stack patches, lantiq devices were emitting a storm
of messages like this:

[  567.872172] Spurious IRQ: CAUSE=0x1100c300

Fix this by reworking the IRQ dispatch code

Signed-off-by: Felix Fietkau <>
5 years agogit-kernel: $(SUBDIR) should always be $(LINUX_VERSION)
Mirko Vogt [Wed, 18 Jan 2017 13:36:45 +0000 (14:36 +0100)]
git-kernel: $(SUBDIR) should always be $(LINUX_VERSION)

Before SUBDIR was set to $(PATCHVER) which may
or may not include the minor version number of
the linux kernel version. Usually it doesn't.

So the git-clone'd linux kernel was packed without
the minor version number taken into account, which
broke further processing, as it expected the
extracted dir being named linux-$(LINUX_VERSION)
(=with minor version) rather than linux-$(PATCHVER)
(=without minor version).

Changing SUBDIR to $(LINUX_VERSION) creates
consistent behaviour here.

Signed-off-by: Mirko Vogt <>
5 years agosdk: do not strip static libraries
Jo-Philipp Wich [Wed, 18 Jan 2017 02:15:31 +0000 (03:15 +0100)]
sdk: do not strip static libraries

Do not strip static libraries shipped with the SDK in order to preserve the
archive index. If we strip the index of the shipped libraries, host programs
will fail to link these libraries with errors like:

    libssl.a: error adding symbols: Archive has no index; run ranlib to add one

The error was found while investigating a Python host build failure within
the SDK environment.

Signed-off-by: Jo-Philipp Wich <>
5 years agonetifd: update to git HEAD version
Hans Dedecker [Tue, 17 Jan 2017 13:00:02 +0000 (14:00 +0100)]
netifd: update to git HEAD version

a057f6e device: fix DEV_OPT_SENDREDIRECTS definition

Signed-off-by: Hans Dedecker <>
5 years agocurl: fix HTTPS network timeouts with OpenSSL
Stijn Segers [Tue, 10 Jan 2017 18:57:47 +0000 (19:57 +0100)]
curl: fix HTTPS network timeouts with OpenSSL

Backport an upstream change to fix HTTPS timeouts with OpenSSL.
Upstream curl bug #1174.

Signed-off-by: Stijn Segers <>
[Jo-Philipp Wich: reword commit message, rename patch to 001-*]
Signed-off-by: Jo-Philipp Wich <>
5 years agoLEDE v17.01: set branch defaults
Jo-Philipp Wich [Mon, 16 Jan 2017 17:56:07 +0000 (18:56 +0100)]
LEDE v17.01: set branch defaults

Signed-off-by: Jo-Philipp Wich <>
5 years agobase-files: add ARCH_PACKAGES to openwrt_release and os-release
Matthias Schiffer [Mon, 16 Jan 2017 12:25:14 +0000 (13:25 +0100)]
base-files: add ARCH_PACKAGES to openwrt_release and os-release

Knowing the package architecture at runtime can be useful, e.g. to
configure opkg repository URLs. The value of ARCH_PACKAGES ("%A" in
VERSION_SED) as added to openwrt_release (as DISTRIB_ARCH) and os-release

Signed-off-by: Matthias Schiffer <>
5 years agoubox: turn logd into a separate package
Andrej Vlasic [Sun, 15 Jan 2017 18:30:53 +0000 (19:30 +0100)]
ubox: turn logd into a separate package

Currently system log is always included as a part of ubox. Add logd as a
seperate package and add it to default packages list.

Signed-off-by: Andrej Vlasic <>
Signed-off-by: Luka Perkov <>
5 years agombedtls: add static files in staging_dir
Domagoj Pintaric [Sun, 1 Jan 2017 18:10:38 +0000 (19:10 +0100)]
mbedtls: add static files in staging_dir

Signed-off-by: Domagoj Pintaric <>
Signed-off-by: Luka Perkov <>
5 years agokernel: make ledtrig-netdev use a work queue for updates
Felix Fietkau [Sat, 14 Jan 2017 21:29:05 +0000 (22:29 +0100)]
kernel: make ledtrig-netdev use a work queue for updates

This fixes hangs in igb that happen if the update call interrupts an
already existing dev_get_stats call. In that case the calling CPU
deadlocks because it's trying to acquire the same spinlock recursively.

Signed-off-by: Felix Fietkau <>
5 years agoinclude/ base list of enabled feeds on available instead of installed feeds
Matthias Schiffer [Mon, 16 Jan 2017 08:11:56 +0000 (09:11 +0100)]
include/ base list of enabled feeds on available instead of installed feeds

This fixes handling of CONFIG_FEED_* options for uninstalled feeds.

Signed-off-by: Matthias Schiffer <>
5 years agoopkg: use default PKG_BUILD_DIR
Matthias Schiffer [Mon, 16 Jan 2017 08:02:42 +0000 (09:02 +0100)]
opkg: use default PKG_BUILD_DIR

opkg doesn't have BUILD_VARIANTs anymore, so the previously defined
PKG_BUILD_DIR would lead to a weird 'opkg-' path component.

Signed-off-by: Matthias Schiffer <>
5 years agomac80211: brcmfmac: add early (& hacky) patch for storing country codes
Rafał Miłecki [Sun, 15 Jan 2017 23:32:27 +0000 (00:32 +0100)]
mac80211: brcmfmac: add early (& hacky) patch for storing country codes

This allows some basic region switching on Netgear R8000. More devices &
codes may be added. Ideally it should be converted into DT info & patch.

Signed-off-by: Rafał Miłecki <>
5 years agomac80211: use wiphy_read_of_freq_limits in brcmfmac
Rafał Miłecki [Sun, 15 Jan 2017 22:04:18 +0000 (23:04 +0100)]
mac80211: use wiphy_read_of_freq_limits in brcmfmac

This makes use of cfg80211 feature backported & described in
188626f17c09 ("mac80211: backport cfg80211 support for
ieee80211-freq-limit DT property").

Signed-off-by: Rafał Miłecki <>
5 years agobcm53xx: add pending BCM5301X patches: Netgear R8000 WiFi & Luxul DTS
Rafał Miłecki [Sun, 15 Jan 2017 21:52:24 +0000 (22:52 +0100)]
bcm53xx: add pending BCM5301X patches: Netgear R8000 WiFi & Luxul DTS

This specifies wireless limitations for Netgear R8000 making sure people
won't use channels incorrectly (limited performance). There are also 2
new DTS files not used by us yet.

Signed-off-by: Rafał Miłecki <>
5 years agokernel: fix bcma serial console regression
Rafał Miłecki [Sun, 15 Jan 2017 21:57:50 +0000 (22:57 +0100)]
kernel: fix bcma serial console regression

Signed-off-by: Rafał Miłecki <>
5 years agoipq806x: refactor ipq8065 device tree
Pavel Kubelun [Sat, 14 Jan 2017 14:01:09 +0000 (17:01 +0300)]
ipq806x: refactor ipq8065 device tree

At the moment we have 2 seperate device tree sources: 1 for ipq8064 soc located
in kernel source and 1 custom in LEDE for ipq8065.
ipq8064 and ipq8065 SoCs are completely identical except ipq8065 has higher cpu
frequencies and adjusted corresponding power supply.

This commit makes ipq8065 DTS to contain only specific for ipq8065 DT entries while
pulling all the basic SoC stuff from ipq8064 DTS.

It makes easier to manage ipq806x device trees and instead of committing changes into
2 seperate equal DTS we are ending up with only 1.
It also enables ipq8065 devices to automatically receive changes made in upstream kernel.

Signed-off-by: Pavel Kubelun <>
5 years agoipq806x: enable hw pseudo random number generator
Pavel Kubelun [Sat, 14 Jan 2017 11:56:56 +0000 (14:56 +0300)]
ipq806x: enable hw pseudo random number generator

Enables support for pseudo random number generator in device tree.

Signed-off-by: Pavel Kubelun <>
5 years agoipq806x: update eMMC and SDCC3 nodes in device tree
Pavel Kubelun [Wed, 28 Dec 2016 13:21:43 +0000 (16:21 +0300)]
ipq806x: update eMMC and SDCC3 nodes in device tree

Enable bam dma support for eMMC and SDCC3 in device tree and update nodes
to reflect Qualcomm SDK.

Signed-off-by: Pavel Kubelun <>
5 years agoipq806x: disable usb3 phy suspend and add usb tcsr control
Pavel Kubelun [Fri, 23 Dec 2016 22:51:07 +0000 (01:51 +0300)]
ipq806x: disable usb3 phy suspend and add usb tcsr control

According to Qualcomm SDK usb3 phy suspend should be disabled for
This may solve issue on some ipq806x devices that breaks usb3
storage peripherals during system boot.

Signed-off-by: Pavel Kubelun <>
5 years agoramips: add back the i2c-mt7621 module
John Crispin [Sun, 15 Jan 2017 19:45:14 +0000 (20:45 +0100)]
ramips: add back the i2c-mt7621 module

mt7628/88 are still using this module.

Signed-off-by: John Crispin <>
5 years agomt76: select 802.11w support
Stijn Tintel [Sun, 15 Jan 2017 18:17:30 +0000 (19:17 +0100)]
mt76: select 802.11w support

Signed-off-by: Stijn Tintel <>
Acked-by: Felix Fietkau <>
5 years agoramips: Added Onion Omega2 and Omega2+
Lazar Demin [Mon, 9 Jan 2017 19:59:56 +0000 (19:59 +0000)]
ramips: Added Onion Omega2 and Omega2+

This patch adds support for the Onion Omega2 and Omega2+ (

- SoC: MediaTek MT7688AN (580MHz, ramips)
- Omega2
  - RAM: 64MB DDR
  - Storage: 16MB NOR SPI flash onboard
- Omega2+
  - RAM: 128MB DDR
  - Storage: 32MB NOR SPI flash onboard + microSD slot
- Wireless: Built into MT7688AN (mt76) with onboard 1x chip antenna and u.FL connecter
- Ethernet: 1x100M pins on Omega2 & Omega2+, can use Ethernet Expansion and an Omega Dock to get a physical Ethernet port
- Strongly recommend using the Omega2 & Omega2+ with a Dock (Expansion Dock, Power Dock, Arduino Dock 2, Mini Dock)
  - All Docks Provide:
    - Micro-USB port to provide power to the Omega
      - On the Expansion and Mini Docks, can also access the terminal (UART0) via serial
    - USB 2.0 socket connected to Omega
  - Just the Expansion Dock, Power Dock, and Arduino Dock 2 provide:
    - Omega GPIO breakout
    - Allows for connection of Omega Expansions:
      - Ethernet Expansion
      - Relay Expansion
      - PWM Expansion
      - OLED Expansion
      - Ethernet Expansion
      - Proto Expansion
      - Cellular Expansion

Signed-off-by: Lazar Demin <>
5 years agokernel: can: Add missing regmap dependency for kernel 4.4
Florian Fainelli [Sun, 15 Jan 2017 05:34:02 +0000 (21:34 -0800)]
kernel: can: Add missing regmap dependency for kernel 4.4

Fixes build failure for kmod-can-c-can-platform which depends on
kmod-regmap for kernel 4.1 and 4.4.

Signed-off-by: Florian Fainelli <>
5 years agoar71xx: Detect USB port on Mikrotik RB750UP
João Chaínho [Fri, 13 Jan 2017 16:23:09 +0000 (16:23 +0000)]
ar71xx: Detect USB port on Mikrotik RB750UP

The USB port on Mikrotik RB750UP isn’t detected. This patch provides a fix. Tested and working.

Signed-off-by: João Chaínho <>
5 years agoramips: Add I2C driver to the default kernel config
Rosen Penev [Fri, 13 Jan 2017 15:14:38 +0000 (07:14 -0800)]
ramips: Add I2C driver to the default kernel config

I made a commit that added the RTC driver to the kernel config with
the intent that it would fix hctosys. Unfortunately while the RTC
driver is in there, it's connected through I2C, the driver for which
comes in module form and is thus loaded late. After this commit, it
works fine.

Signed-off-by: Rosen Penev <>
5 years agoimx6: kernel: Backport serial port fixes
Petr Štetiar [Fri, 13 Jan 2017 10:42:08 +0000 (11:42 +0100)]
imx6: kernel: Backport serial port fixes

Signed-off-by: Petr Štetiar <>
5 years agokernel: backport MIPS changes introducing a separate IRQ stack
Felix Fietkau [Wed, 11 Jan 2017 09:57:49 +0000 (10:57 +0100)]
kernel: backport MIPS changes introducing a separate IRQ stack

Prevents crashes when IRQs arrive when the current kernel stack context
already contains deeply nested function calls, e.g. when stacking lots
of network devices on top of each other

Signed-off-by: Felix Fietkau <>
5 years agogitignore: add /overlay
Matthias Schiffer [Sun, 15 Jan 2017 17:16:29 +0000 (18:16 +0100)]
gitignore: add /overlay

Similar to /files, /overlay is only useful for modifications not tracked in
the LEDE repository itself.

Signed-off-by: Matthias Schiffer <>
5 years agoath10k-firmware: Update QCA988X firmware to latest version
Timo Sigurdsson [Wed, 11 Jan 2017 21:49:29 +0000 (22:49 +0100)]
ath10k-firmware: Update QCA988X firmware to latest version

This patch updates the QCA988X firmware to the latest revision
found in the official ath10k-firmware repository.

Tested on TP-Link Archer C7 v2.

Signed-off-by: Timo Sigurdsson <>
5 years agohostapd: fix passing jobserver to hostapd/supplicant build processes
Felix Fietkau [Sun, 15 Jan 2017 13:56:34 +0000 (14:56 +0100)]
hostapd: fix passing jobserver to hostapd/supplicant build processes

Signed-off-by: Felix Fietkau <>
5 years agohostapd: backport a few upstream fixes
Felix Fietkau [Sun, 15 Jan 2017 13:19:43 +0000 (14:19 +0100)]
hostapd: backport a few upstream fixes

Fixes reassoc issues with WDS mode
Fixes reassoc issues in AP mode
Fixes IBSS reauthentication issues

Signed-off-by: Felix Fietkau <>
5 years agomt76: update to the latest version, adds support for 802.11w
Felix Fietkau [Sat, 14 Jan 2017 22:09:34 +0000 (23:09 +0100)]
mt76: update to the latest version, adds support for 802.11w

Signed-off-by: Felix Fietkau <>