Jo-Philipp Wich [Wed, 1 Aug 2018 20:33:49 +0000 (22:33 +0200)]
Revert "ar71xx: ag71xx: Prevent kernel oops for board def"
This reverts commit
7a3e133751870a3431e2430386a77a002eb24117.
This change reportedly breaks connectivity on some ar71xx devices, so
revert it for now.
Ref: https://github.com/openwrt/openwrt/pull/1217#issuecomment-
409708087
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Wed, 1 Aug 2018 20:31:34 +0000 (22:31 +0200)]
Revert "ar71xx: ag71xx: Add connect message: fixed phy"
This reverts commit
0b9f4e880807e3cfd22d12b929202e1edcdc577c.
This change reportedly breaks connectivity on some ar71xx devices, so
revert it for now.
Ref: https://github.com/openwrt/openwrt/pull/1217#issuecomment-
409708087
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Wed, 1 Aug 2018 20:31:04 +0000 (22:31 +0200)]
Revert "ar71xx: ag71xx_phy: Fix compilation for debug messages"
This reverts commit
2655fbe8efb2a596aa8db92cffa817e3bf0c64ea.
The patch introduces syntax errors, revert it for now.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Koen Vandeputte [Wed, 1 Aug 2018 11:32:22 +0000 (13:32 +0200)]
gdb: bump to 8.1.1
GDB 8.1.1 brings the following fixes and enhancements over GDB 8.1:
* PR gdb/22824 (misleading description of new rbreak Python function in GDB 8.1 NEWS file)
* PR gdb/22849 (ctrl-c doesn't work in extended-remote)
* PR gdb/22907 ([Regression] gdbserver doesn't work with filename-only binaries)
* PR gdb/23028 (inconsistent disassemble of vcvtpd2dq)
* PR gdb/23053 (Fix -D_GLIBCXX_DEBUG gdb-add-index regression)
* PR gdb/23127 ([AArch64] GDB cannot be used for debugging software that uses high Virtual Addresses)
* PR server/23158 (gdbserver no longer functional on Windows)
* PR breakpoints/23210 ([8.1/8.2 Regression] Bogus Breakpoint address adjusted from 0xf7fe7dd3 to 0xfffffffff7fe7dd3)
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Wed, 1 Aug 2018 11:39:03 +0000 (13:39 +0200)]
toolchain/gdb: bump to 8.1.1
GDB 8.1.1 brings the following fixes and enhancements over GDB 8.1:
* PR gdb/22824 (misleading description of new rbreak Python function in GDB 8.1 NEWS file)
* PR gdb/22849 (ctrl-c doesn't work in extended-remote)
* PR gdb/22907 ([Regression] gdbserver doesn't work with filename-only binaries)
* PR gdb/23028 (inconsistent disassemble of vcvtpd2dq)
* PR gdb/23053 (Fix -D_GLIBCXX_DEBUG gdb-add-index regression)
* PR gdb/23127 ([AArch64] GDB cannot be used for debugging software that uses high Virtual Addresses)
* PR server/23158 (gdbserver no longer functional on Windows)
* PR breakpoints/23210 ([8.1/8.2 Regression] Bogus Breakpoint address adjusted from 0xf7fe7dd3 to 0xfffffffff7fe7dd3)
GDB 8.1 includes the following changes and enhancements:
* Breakpoints on C++ functions are now set on all scopes by default
("wild" matching);
* Support for inserting breakpoints on functions marked with C++ ABI tags;
* Target floating-point arithmetic emulation during expression evaluation
(requires MPFR 3.1 or later);
* Various Python Scripting enhancements;
* Improved Rust support; in particular, Trait objects can now be inspected
when debugging Rust code;
* GDB no longer makes assumptions about the type of symbols without
debugging information to avoid producing erroneous and often confusing
results;
* The 'enable' and 'disable' commands now accept a range of breakpoint
locations;
* New 'starti' command to start the program at the first instruction;
* New 'rbreak' command to insert a number of breakpoints via a regular
expression pattern (requires Python);
* The 'ptype' command now supports printing the offset and size of
the fields in a struct;
* The 'gcore' command now supports dumping all the memory mappings
('-a' command-line option);
* New shortcuts for TUI Single-Key mode: 'i' for stepi, and 'o' for nexti;
* GDBserver enhancements:
** Support for transmitting environment variables to GDBserver;
** Support for starting inferior processes with a specified initial
working directory;
** On Unix systems, support for globbing expansion and variable
substitution of inferior command-line arguments;
* Various completion enhancements;
* The command used to compile and inject code with the 'compile' command
is now configurable;
* New '--readnever' command-line option to speed the GDB startup when
debugging information is not needed;
* Support for the following new native configurations:
** FreeBSD/aarch64 (aarch64*-*-freebsd*);
** FreeBSD/arm (arm*-*-freebsd*);
* Support for the following new targets:
** FreeBSD/aarch64 (aarch64*-*-freebsd*);
** FreeBSD/arm (arm*-*-freebsd*);
** OpenRISC ELF (or1k*-*-elf)
* Removed support for the following targets and native configurations:
** Solaris2/x86 (i?86-*-solaris2.[0-9]);
** Solaris2/sparc (sparc*-*-solaris2.[0-9]);
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Eneas U de Queiroz [Fri, 25 May 2018 14:43:32 +0000 (11:43 -0300)]
adb: added patch for openssl 1.1.0 compatibility
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Rosy Song [Tue, 31 Jul 2018 09:09:34 +0000 (17:09 +0800)]
nftables: allow to build with json support
Signed-off-by: Rosy Song <rosysong@rosinson.com>
Daniel F. Dickinson [Sun, 29 Jul 2018 11:40:01 +0000 (07:40 -0400)]
ar71xx: cr3000: cleanup board definition
1) Add comments so it's clear why we did things; this may prevent
someone (e.g. me) from sinking time into fixing things that
aren't broken and/or were done for reason.
2) Drop mdio 0 probe/register; we don't use ag1xx mdio bus 0.
3) Cosmetic reording of some code (tested) that makes the defintion
more clear.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Daniel F. Dickinson [Sun, 29 Jul 2018 11:17:19 +0000 (07:17 -0400)]
ar71xx: cr3000: Use correct company name
It's 'PowerCloud Systems' not 'PowerCloud'.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Daniel F. Dickinson [Wed, 25 Jul 2018 23:18:07 +0000 (19:18 -0400)]
ar71xx: cr3000: Drop support for defunct cloud
The CR3000 stock firmware is now irrelevant as it required a now defunct
cloud service. Therefore only build images that use the entire flash
(overwriting stock firwmare-specific partitions that no longer matter),
previously called 'nocloud' images.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Daniel F. Dickinson [Sat, 28 Jul 2018 12:57:22 +0000 (08:57 -0400)]
ath79: Forward port support for CR3000
The PowerCloud Systems CR3000 was a cloud-managed CPE for a now defunct
NaaS offering. It was previously supported under the ar71xx branch and
this forward ports that support with some notable differences:
1) Since reverting to stock firmware is now irrelevant there is is only
a single openwrt image generated which uses the entire flash rather than
preserving PowerCloud-specific partitions that are unneeded to openwrt--
those partitions will be erased and used by the openwrt image.
2) Rather than use a non-standard probe order for the ethernet devices,
this image uses a set of 'ip link set ethX name ethY' commands very early
in preinit (before the network is used at all), in order to have the the
switch and Wan use the same ethernet names as in previous images.
3) /etc/config/wireless will need to be regenerated as the path to the
wireless device has changed due to differences in ath79 DT for ar93x
compared to ar71xx images.
4) eth0 is wan and eth1 is lan (switch)
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Koen Vandeputte [Tue, 31 Jul 2018 11:30:14 +0000 (13:30 +0200)]
kernel: bump 4.9 to 4.9.116
Refreshed all patches
Remove upstreamed patches.
- 103-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch
- 403-mtd_fix_cfi_cmdset_0002_status_check.patch
- 001-4.11-01-mtd-m25p80-consider-max-message-size-in-m25p80_read.patch
- 001-4.15-08-bcm63xx_enet-correct-clock-usage.patch
- 001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch
- 900-gen_stats-fix-netlink-stats-padding.patch
Introduce a new backported patch to address ext4 breakage, introduced in 4.9.112
- backport-4.9/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch
This patch has been slightly altered to compensate for a new helper function
introduced in later kernels.
Also add ARM64_SSBD symbol to ARM64 targets still running kernel 4.9
Compile-tested on: ar71xx, bcm2710
Runtime-tested on: ar71xx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Jo-Philipp Wich [Wed, 1 Aug 2018 07:11:17 +0000 (09:11 +0200)]
sdk: bundle usbip userspace sources
Bundle the usbip utility sources shipped with the Linux kernel tree in
order to allow the usbip packages from the package feed to build within
the OpenWrt SDK.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 31 Jul 2018 18:39:13 +0000 (20:39 +0200)]
iwinfo: update to latest Git HEAD
a514139 build: compile with -ffunction-sections, -fdata-sections and LTO
3c30b17 wl: only invoke nvram executable if it exists
65b8333 Revert "build: compile with -ffunction-sections, -fdata-sections and LTO"
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Bjørn Mork [Tue, 31 Jul 2018 12:01:12 +0000 (14:01 +0200)]
include/feeds.mk: fix distfeeds.conf without per-feed repos
commit
514a4b3e1b4e4 ("include/feeds.mk: rework generation of opkg
distfeeds.conf") made the per-feed "base" repo unconditional, making
the default configuration fail when PER_FEED_REPO is disabled:
root@wrt1900ac-1:~# cat /etc/opkg/distfeeds.conf
src/gz openwrt_core http://openwrt.mork.no/18.06.0/targets/mvebu/cortexa9/packages
src/gz openwrt_base http://openwrt.mork.no/18.06.0/packages/arm_cortex-a9_vfpv3/base
root@wrt1900ac-1:~# opkg update
Downloading http://openwrt.mork.no/18.06.0/targets/mvebu/cortexa9/packages/Packages.gz
Updated list of available packages in /var/opkg-lists/openwrt_core
Downloading http://openwrt.mork.no/18.06.0/targets/mvebu/cortexa9/packages/Packages.sig
Signature check passed.
Downloading http://openwrt.mork.no/18.06.0/packages/arm_cortex-a9_vfpv3/base/Packages.gz
*** Failed to download the package list from http://openwrt.mork.no/18.06.0/packages/arm_cortex-a9_vfpv3/base/Packages.gz
Collected errors:
* opkg_download: Failed to download http://openwrt.mork.no/18.06.0/packages/arm_cortex-a9_vfpv3/base/Packages.gz, wget returned 8.
Cc: Matthias Schiffer <mschiffer@universe-factory.net>
Fixes: 514a4b3e1b4e ("include/feeds.mk: rework generation of opkg distfeeds.conf")
Signed-off-by: Bjørn Mork <bjorn@mork.no>
[whitespace/indentation fix]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Stijn Tintel [Tue, 31 Jul 2018 09:19:18 +0000 (12:19 +0300)]
kernel: add missing ARM64_SSBD symbol
In 4.14.57, a new symbol for Spectre v4 mitigation was introduced for
ARM64. Add this symbol to all ARM64 targets using kernel 4.14.
This mitigates CVE-2018-3639 on ARM64.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Rafał Miłecki [Tue, 31 Jul 2018 07:44:19 +0000 (09:44 +0200)]
mac80211: brcmfmac: backport patch for per-firmware features
This allows driver to support features that can't be dynamically
discovered.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Daniel Golle [Tue, 31 Jul 2018 03:17:52 +0000 (05:17 +0200)]
kernel: remove duplicate #define's in at803x Ethernet PHY driver
AT803X_REG_CHIP_CONFIG and AT803X_BT_BX_REG_SEL have been defined
upstream by commit
f62265b53ef3 ("at803x: double check SGMII side autoneg")
An existing local patch then added those exact same defines again which
isn't necessary, so remove them.
Fixes: f791fb4af450 ("kernel: add linux 4.9 support")
Fixes: b3f95490b9be ("kernel: generic: Add kernel 4.14 support")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Tue, 31 Jul 2018 02:50:38 +0000 (04:50 +0200)]
kernel: re-add patch for AT8032 Ethernet PHY
The patch was wrongly removed by a kernel version bump to 4.9.105 in
the believe that it was merged upstream thow it wasn't. This lead to
unrecoverable link losses on devices which use those PHYs such as
many ubnt single-port CPEs.
Fixes: 7dca1bae82 (kernel: bump to 4.9.105)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Stijn Tintel [Thu, 28 Jun 2018 09:44:10 +0000 (11:44 +0200)]
kernel: add pending e1000e fixes
The previous round of fixes for the 82574 chip cause an issue with
emulated e1000e devices in VMware ESXi 6.5. It also contains changes
that are not strictly necessary. These patches fix the issues introduced
in the previous series, revert the unnecessary changes to avoid
unforeseen fallout, and avoid a case where interrupts can be missed.
The final two patches of this series are already in the kernel, so no
need to include them here.
Patchwork: https://patchwork.ozlabs.org/cover/881776/
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Tue, 31 Jul 2018 02:11:07 +0000 (05:11 +0300)]
kernel: bump 4.14 to 4.14.59
Drop patch that was superseded upstream:
ramips/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
Drop upstreamed patches:
- apm821xx/020-0001-crypto-crypto4xx-remove-bad-list_del.patch
- apm821xx/020-0011-crypto-crypto4xx-fix-crypto4xx_build_pdr-crypto4xx_b.patch
- ath79/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch
- brcm63xx/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch
- brcm63xx/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch
- generic/backport/080-net-convert-sock.sk_wmem_alloc-from-atomic_t-to-refc.patch
- generic/pending/170-usb-dwc2-Fix-DMA-alignment-to-start-at-allocated-boun.patch
- generic/pending/900-gen_stats-fix-netlink-stats-padding.patch
In 4.14.55, a patch was introduced that breaks ext4 images in some
cases. The newly introduced patch
backport-4.14/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch
addresses this breakage.
Fixes the following CVEs:
- CVE-2018-10876
- CVE-2018-10877
- CVE-2018-10879
- CVE-2018-10880
- CVE-2018-10881
- CVE-2018-10882
- CVE-2018-10883
Compile-tested: ath79, octeon, x86/64
Runtime-tested: ath79, octeon, x86/64
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Christian Schoenebeck [Mon, 30 Jul 2018 19:28:00 +0000 (21:28 +0200)]
ca-caertificates: remove myself as PKG_MAINTAINER
remove myself as PKG_MAINTAINER
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
John Crispin [Mon, 30 Jul 2018 21:56:14 +0000 (23:56 +0200)]
netifd: update to latest git HEAD
fix a compile error
Signed-off-by: John Crispin <john@phrozen.org>
Matt Merhar [Mon, 30 Jul 2018 21:21:57 +0000 (17:21 -0400)]
kernel: switch compatible property for RedBoot DT binding
This changes the DT binding's compatible property to
"ecoscentric,redboot-fis-partitions", removing the existing reference to
Red Hat.
Per the documentation hosted at eCosCentric's website, eCosCentric is
RedBoot's sole commercial maintainer since 2002, and the project has
been under the stewardship of the Free Software Foundation since 2008.
This also updates the property in the Inventel Livebox 1 .dts, the
binding's only current user.
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
Hans Dedecker [Mon, 30 Jul 2018 20:54:04 +0000 (22:54 +0200)]
netifd: update to latest git HEAD (FS#1668)
75ee790 interface-ip: fix eui64 ifaceid generation (FS#1668)
ca97097 netifd: make sure the vlan ifname fits into the buffer
b8c1bca iprule: remove bogus assert calls
a2f952d iprule: fix broken in_dev/out_dev checks
263631a vlan: use alloca to get rid of IFNAMSIZE in vlan_dev_set_name()
291ccbb ubus: display correct prefix size for IPv6 prefix address
908a9f4 CMakeLists.txt: add -Wimplicit-fallthrough to the compiler flags
b06b011 proto-shell.c: add a explicit "fall through" comment to make the compiler happy
60293a7 replace fall throughs in switch/cases where possible with simple code changes
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Christian Lamparter [Mon, 30 Jul 2018 20:33:51 +0000 (22:33 +0200)]
kernel: modules: fix kmod-regmap
This patch fixes the a compile issue that was triggered by
apm821xx/sata when kmod-regmap was selected.
The CONFIG_REGMAP is declared in drivers/base/regmap/Kconfig
as type "bool" and not "tristate". Hence the symbol should
never be set to module, as this confuses the #if CONFIG_REGMAP
guards in include/linux/regmap.h:
|.../drivers/regulator/core.c:4041: undefined reference to `dev_get_regmap'
|.../drivers/regulator/core.c:4042: undefined reference to `dev_get_regmap'
|.../drivers/regulator/core.c:4044: undefined reference to `dev_get_regmap'
|.../drivers/regulator/helpers.o: In function `regulator_is_enabled_regmap':
|.../drivers/regulator/helpers.c:36: undefined reference to `regmap_read'
|...
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Stijn Tintel [Mon, 30 Jul 2018 20:23:48 +0000 (23:23 +0300)]
tcpdump: explicitly disable libcap-ng support
When libcap-ng is detected during build, support for it is enabled. This
will cause a build failure due to a missing dependency. Explicitly
disable libcap-ng support to avoid this.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
John Crispin [Mon, 30 Jul 2018 18:51:56 +0000 (20:51 +0200)]
brcm2708: fix w1 patch
this is now part of generic
Signed-off-by: John Crispin <john@phrozen.org>
Sven Eckelmann [Mon, 30 Jul 2018 15:43:48 +0000 (17:43 +0200)]
ipq40xx: Limit usable channels for OpenMesh A62 PHYs
The OpenMesh A62 is a tri-band device (1x 2.4GHz, 2x 5GHz) with special
filters in front of the RX+TX paths to the 5GHz PHYs. These filtered
channel can in theory still be used by the hardware but the signal strength
is reduced so much that it makes no sense.
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Sven Eckelmann [Mon, 30 Jul 2018 15:43:09 +0000 (17:43 +0200)]
mac80211: ath10k: Limit available channels via DT ieee80211-freq-limit
Tri-band devices (1x 2.4GHz + 2x 5GHz) often incorporate special filters in
the RX and TX path. These filtered channel can in theory still be used by
the hardware but the signal strength is reduced so much that it makes no
sense.
There is already a DT property to limit the available channels but ath10k
has to manually call this functionality to limit the currrently set wiphy
channels further.
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Matt Merhar [Mon, 30 Jul 2018 18:11:09 +0000 (14:11 -0400)]
ath79: fix irq assignment for pci-ar71xx driver
In the new DT-based pci-ar71xx driver, ar71xx_pci_irq_init() was being
called before populating the PCI controller's device_node struct member.
This led to no IRQ being assigned to connected PCI devices (e.g. ath9k
cards) and caused them to be non-functional aside from simply being
detected.
The previous errors encountered in dmesg were: "irq: no irq domain found
for /ahb/apb/pcie-controller@
180c0000 !". /proc/interrupts listed an IRQ
of 0 for the cards.
While this has been only been tested on a yet-to-be-merged RouterStation
Pro target, it should also fix the broken wifi people have reported for
the ath79 WNDR3800 target.
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
Torbjörn Jansson [Mon, 30 Jul 2018 13:59:20 +0000 (15:59 +0200)]
kernel: add kmod-iio-htu21
This adds support for the htu21 humidity and temperature sensor.
To get it to work you have to do something like this:
echo "htu21 0x40" >/sys/class/i2c-dev/i2c-1/device/new_device
for example by adding it to rc.local
Compile tested on brcm2708 and I have used an earlier version of this
patch for more than a year.
Signed-off-by: Torbjörn Jansson <torbjorn.jansson@mbox200.swipnet.se>
Alexandru Ardelean [Mon, 30 Jul 2018 14:03:18 +0000 (17:03 +0300)]
wolfssl: remove myself as maintainer
I no longer have the time, nor the desire to maintain this package.
Remove myself as maintainer.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Thibaut VARÈNE [Mon, 30 Jul 2018 15:37:40 +0000 (17:37 +0200)]
ar71xx: define switch for rb-952ui-5ac2nd
QCA9533 built-in switch can be configured
Tested-by: Thibaut VARÈNE <hacks@slashdirt.org>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Mantas Pucka [Mon, 30 Jul 2018 15:08:49 +0000 (18:08 +0300)]
ipq40xx: fix booting secondary CPU cores
95672e04 broke booting secondary cores by removing 'qcom,saw' property
from L2 cache node. kpssv2_release_secondary() requires it.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
John Crispin [Mon, 30 Jul 2018 15:47:06 +0000 (17:47 +0200)]
ar71xx: fix TL-WR1043N v5 port mapping
fixes
5660c8fb20 ("ar71xx: TL-WR1043N v5: fix mapping of LAN ports to labels on housing.")
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Mon, 30 Jul 2018 15:42:39 +0000 (17:42 +0200)]
base-files: drop fwtool_pre_upgrade
this feature has never worked, the fw image name was not passed and the -t
parameter was missing in the tool invocation. drop the feature.
Signed-off-by: John Crispin <john@phrozen.org>
Tim Thorpe [Wed, 18 Apr 2018 22:50:05 +0000 (17:50 -0500)]
ar71xx: TL-WR1043N v5: fix mapping of LAN ports to labels on housing.
Reversed the numbering of the LAN ports in Luci so as to match the port numbers on the housing.
Signed-off-by: Tim Thorpe <tim@tfthorpe.net>
Tim Thorpe [Tue, 13 Feb 2018 15:26:18 +0000 (09:26 -0600)]
ar71xx: TL-WR1043N v4/v5: add orange WAN LED support
Add missing definitions for the orange WAN LED on the
TL-WR1043N(D) v4 and v5.
Change the name of a MAC address offset constant to
make it consistent with the format of the
existing constants.
Signed-off-by: Tim Thorpe <tim@tfthorpe.net>
Lucian Cristian [Mon, 30 Jul 2018 13:21:12 +0000 (16:21 +0300)]
ath79: add support for tl-wr841n-v9
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
INAGAKI Hiroshi [Thu, 26 Jul 2018 14:24:22 +0000 (23:24 +0900)]
ramips: add support for ELECOM WRC-2533GST
ELECOM WRC-2533GST is a 2.4/5 GHz band 11ac rotuer, based on
MediaTek MT7621A.
Specification:
- MT7621A (2-Core, 4-Threads)
- 128 MB of RAM (DDR3)
- 16 MB of Flash (SPI)
- 4T4R 2.4/5 GHz wifi
- MediaTek MT7615
- 5x 10/100/1000 Mbps Ethernet
- 4x LEDs, 6 keys (2x buttons, 1x slide switch)
- UART header on PCB
- Vcc, GND, TX, RX from ethernet port side
- baudrate: 57600 bps
Flash instruction using factory image:
1. Connect the computer to the LAN port of WRC-2533GST
2. Connect power cable to WRC-2533GST and turn on it
3. Access to "https://192.168.2.1/" and open firmware update
page ("ファームウェア更新")
4. Select the OpenWrt factory image and click apply ("適用")
button
5. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Paul Spooren [Fri, 20 Jul 2018 08:32:12 +0000 (17:32 +0900)]
imagebuilder: add function to show manifest
Tested with 18.06.0-rc2/ar71xx/generic/tl-wdr4300-v1, image & list
This PR is based on the work of @fewckert[1] with slight improvements.
Add function `manifest` to show the manifest of the produced image,
before actually building it. The manifest contains an orderd list of
package name and version.
This is usefull to check package dependencies but also determine a
unique and reproducible image name before building the package. The
sysupgrade server[2] builds images on request with individual package
selection. To distignish between created images which contain differnt
packages, the EXTRA_IMAGE_NAME is set to a shortend hash of the
manifest's content. So far the image was renamed afterwards as the
manifests content was unknown, however this corrupts the signed
sha256sums. This patch allows a clean solution as to dtermine the
manifest in advance and set the EXTRA_IMAGE_NAME accordingly.
[1]: https://github.com/lede-project/source/pull/1591
[2]: https://github.com/aparcar/attendedsysupgrade-server
Signed-off-by: Paul Spooren <mail@aparcar.org>
Kjel Delaey [Tue, 5 Jun 2018 13:47:05 +0000 (15:47 +0200)]
x86: add support to set GRUB menu entry title
$ make menuconfig
Target Images -> Title for the menu entry in GRUB
Signed-off-by: Kjel Delaey <kjel_delaey@hotmail.com>
Ademar Arvati Filho [Fri, 6 Jul 2018 00:56:58 +0000 (00:56 +0000)]
kirkwood: add support for Iomega Storcenter ix2-200
Iomega Storcenter ix2-200 is a dual SATA NAS powered by a Marvell
Kirkwood SoC clocked at 1GHz. It has 256MB of RAM and 32MB of
flash memory, 3x USB 2.0 and 1x 1Gbit/s NIC
Specification:
- SoC: Marvell Kirkwood
88F6281
- CPU/Speed: 1000Mhz
- Flash-Chip: Hynix NAND
- Flash size: 32 MiB,erase size:16 KiB,page size:512,OOB size:16
- RAM: 256MB
- LAN: 1x 1000 Mbps Ethernet
- WiFi: none
- 3x USB 2.0
- UART: for serial console
Installation instructions - easy steps:
1. download factory.bin and copy into tftp server
2. access uboot environment with serial cable and run
```
setenv mainlineLinux yes
setenv arcNumber 1682
setenv console 'console=ttyS0,115200n8'
setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
setenv bootargs_root 'root='
setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
saveenv
setenv serverip 192.168.1.1
setenv ipaddr 192.168.1.13
tftpboot 0x00800000 factory.bin
nand erase 0x100000 $(filesize)
nand write 0x00800000 0x100000 $(filesize)
run bootcmd
```
3. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)
Installation steps nand bad blocks proof:
1. download initramfs-uImage and copy into usb ext2 partition
```
mkfs.ext2 -L ext2 /dev/sdh1
mount -t ext2 /dev/sdh1 /mnt
cp initramfs-uImage /mnt/initramfs.bin
umount /mnt
```
2. access uboot environment with serial cable and run
```
setenv mainlineLinux yes
setenv arcNumber 1682
setenv console 'console=ttyS0,115200n8'
setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
setenv bootargs_root 'root='
setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
saveenv
usb reset; ext2load usb 0:1 0x00800000 /initramfs.bin; bootm 0x00800000
```
3. log into openwrt and sysupgrade to install into flash
```
sysupgrade -n /tmp/sysupgrade.bin
```
4. access openwrt by dhcp ip address assigned by your router (p.ex: 192.168.1.13)
Signed-off-by: Ademar Arvati Filho <arvati@hotmail.com>
Eneas U de Queiroz [Mon, 30 Jul 2018 12:27:52 +0000 (12:27 +0000)]
libevent2: Don't build tests and samples
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
This reduces build time significantly.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Jo-Philipp Wich [Mon, 30 Jul 2018 13:00:53 +0000 (15:00 +0200)]
ath10k-ct: fix build with current mac80211 package
Commit
2dcd955aea ("mac80211: backport and update patches for ath10k")
changed the DFS detector API, causing ath10k-ct to fail building due to
a missing add_pulse() argument.
Extend the already existing kernel compatibility patch to also adjust
the add_pulse() call accordingly.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Julien Dusser [Tue, 17 Jul 2018 16:29:34 +0000 (18:29 +0200)]
Jianhui Zhao [Tue, 17 Apr 2018 03:09:14 +0000 (11:09 +0800)]
samsung/s5pv210: New target
Signed-off-by: Jianhui Zhao <jianhuizhao329@gmail.com>
Keith Maika [Fri, 15 Jun 2018 04:39:09 +0000 (00:39 -0400)]
ar71xx: add support for TP-Link Archer C59 v2
TP-Link Archer C59v2 is a dual-band AC1350 router based on
Qualcomm/Atheros QCA9561+QCA9886 chips.
Specification:
- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- USB 2.0 port
- UART header on PCB
Flash instruction:
- via web UI:
1. Download openwrt-ar71xx-generic-archer-c59-v2-squashfs-factory.bin
2. Login to router and open the Advanced tab
3. Navigate to System Tools -> Firmware Upgrade
4. Upload firmware using the Manual Upgrade form
- via TFTP:
1. Set PC to fixed ip address 192.168.0.66
2. Download openwrt-ar71xx-generic-archer-c59-v2-squashfs-factory.bin
and rename it to tp_recovery.bin
3. Start a tftp server with the file tp_recovery.bin in its root directory
4. Turn off the router
5. Press and hold Reset button
6. Turn on router with the reset button pressed and wait ~15 seconds
7. Release the reset button and after a short time
the firmware should be transferred from the tftp server
8. Wait ~30 second to complete recovery.
Signed-off-by: Keith Maika <keithm@aoeex.com>
Rafał Miłecki [Mon, 30 Jul 2018 10:06:20 +0000 (12:06 +0200)]
kernel: add missing include to redboot.c
This fixes:
drivers/mtd/redboot.c:299:34: error: array type has incomplete element type 'struct of_device_id'
Fixes: 5e8b4be53177 ("kernel: add DT binding support to the mtd redboot parser")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Mon, 30 Jul 2018 06:45:41 +0000 (08:45 +0200)]
brcm63xx: update DT RedBoot binding for the Inventel Livebox 1
linux,part-probe should be avoided as its only supported with OpenWrt
downstream patch that is going to be dropped eventually.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jo-Philipp Wich [Mon, 30 Jul 2018 06:36:26 +0000 (08:36 +0200)]
brcm47xx: rework model detection
On brcm47xx boards, the model ID is the combination of the "boardtype" nvram
variable and an optional supplemental "boardnum" variable while the human
readable model name is usually exposed in the "machine" field of the
/proc/cpuinfo file.
Move the extraction of the board nvram variables and model name string into
the 01_sysinfo file and rework the 01_detect board configuration script to
solely use the prepared sysinfo values without performing own detection
logic.
As a consequence, we can drop the ucidef_set_board_id() and
ucidef_set_model_name() invocations in favor to the generic behaviour
which copies the /tmp/sysinfo/{board_name,model} values into the board.json
"id" and "name" fields respectively.
Since "01_detect" only contains network configuration logic after this
change, move it to "01_network" and rename the contained "detect_by_xxx"
functions to "configure_by_xxx" instead, to avoid potential confusion.
Fixes FS#1576
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Lucian Cristian [Thu, 19 Jul 2018 06:59:43 +0000 (09:59 +0300)]
omap: disable ubifs
ubifs image are not working, until there is a fix, disable them
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Lucian Cristian [Thu, 19 Jul 2018 06:58:42 +0000 (09:58 +0300)]
omap: add support for f2fs/ext4 overlay creation
add kernel support and include the tools for creating an overlay partition (f2fs or ext4)
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Lucian Cristian [Thu, 19 Jul 2018 06:55:19 +0000 (09:55 +0300)]
omap: add sysupgrade support
add sysupgrade missing script files
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Lucian Cristian [Thu, 19 Jul 2018 06:48:56 +0000 (09:48 +0300)]
omap: rename image for sysupgrade compatibility
for sysupgrade to work we need to change the image name based on dts target name
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Lucian Cristian [Thu, 19 Jul 2018 06:45:25 +0000 (09:45 +0300)]
omap: fix squashfs image boot and creation
fixes FS#1034, squash fs images fails to boot because of missing ARM BCJ filter decoder
also activate squashf image creation
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Nick Hainke [Thu, 17 May 2018 10:35:23 +0000 (12:35 +0200)]
hostapd: add ht and vht support in handle event function Add ht and vht capabilities. If a device sends a probe request, the capabilities are added.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Wed, 25 Apr 2018 22:03:05 +0000 (00:03 +0200)]
hostapd: add ubus call for ap features
The call "get_features" allows to gather hostapd config options
via ubus. As first infos we add the ht and vht support.
Although nl80211 supports to gather informations about
ht and vht capabilities, the hostapd configuration can disable
vht and ht. However, it is possible that the iw output is not
representing the actual hostapd configuration.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Mathew McBride [Wed, 25 Apr 2018 02:51:48 +0000 (12:51 +1000)]
uboot-envtools: add configuration for Traverse LS1043 boards.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Mathew McBride [Mon, 30 Apr 2018 12:42:39 +0000 (22:42 +1000)]
layerscape: add Traverse LS1043-S support
The Traverse LS1043-S board is a router board based on
NXP/Freescale's LS1043 SoC, with 4x1GBase-T, 1 SFP and 1 SFP+,
as well as miniPCIe and M.2 LTE.
Unlike the Layerscape reference boards, the LS1043-S board has
NAND flash and uses the mainline U-Boot.
This patch implements support for the LS1043-S board, as well as
the earlier LS1043-V board. It is our intention that all boards
in this family (LS1043-S and later, Five64) will boot the same binary.
Not included in this patchset are the hwmon drivers not in the kernel
(emc1704,pac1934) or the bootloader.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Mathew McBride [Mon, 30 Apr 2018 12:43:29 +0000 (22:43 +1000)]
layerscape: add multiple-configuration generator for FIT images
This is required for the Traverse LS1043 family, we generate a FIT image
that works on all boards across the family. This is done by creating
multiple configurations that select the right DTB for the board.
The bootloader on these boards is configured to boot like this:
bootm $kernel_load#ls1043s
bootm $kernel_load#ls1043v
This is based on earlier work by Jason Wu for Zynq:
https://lists.openwrt.org/pipermail/openwrt-devel/2016-March/040460.html
Modified to add FDT load addresses and multiple configurations with DTB.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Mathew McBride [Mon, 16 Apr 2018 23:45:11 +0000 (09:45 +1000)]
layerscape: add support for fixed-link on RGMII interfaces
This is required on the Traverse LS1043 boards to support SFP
and xDSL plug-ins.
This will not be needed on kernel 4.14.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Mathew McBride [Mon, 16 Apr 2018 23:43:38 +0000 (09:43 +1000)]
layerscape: enable QorIQ thermal driver
This provides access to the CPU die temperature sensor and
the thermal throttling integration
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Mathew McBride [Mon, 16 Apr 2018 23:43:03 +0000 (09:43 +1000)]
layerscape: remove DEVICE_TYPE=developerboard
The Traverse LS1043 series are router boards and need the default router package
selection
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Luiz Angelo Daros de Luca [Tue, 27 Mar 2018 05:42:06 +0000 (02:42 -0300)]
openvpn-easy-rsa: update to 3.0.4
Upstream renamed openssl-1.0.cnf to openssl-easyrsa.cnf.
However, pkg kept using openssl-1.0.cnf.
Upstream easyrsa searchs for vars, openssl-*, x509-types in the
same directory as easyrsa script. This was patched to revert
back to static /etc/easy-rsa/ directory (as does OpenSUSE).
EASYRSA_PKI still depends on $PWD.
Move easyrsa from /usr/sbin to /usr/bin as root is not needed.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Daniel Gimpelevich [Sun, 21 Jan 2018 21:00:12 +0000 (13:00 -0800)]
kernel: package x86-optimized crypto-misc modules
Some of the modules in the crypto-misc package have alternate
implementations optimized for different x86 instruction set extensions,
but only one of these was built for this package until now: twofish-i586.ko
Tested with insmod, on both x86 and x86_64. The modules now have an
autoload, which they previous didn't, loading the dependencies in the
correct order.
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Pawel Dembicki [Thu, 15 Feb 2018 21:21:25 +0000 (22:21 +0100)]
kernel: generic: fix problem with w1-gpio-custom
In boards with fdt is impossible to use kmod-w1-gpio-custom.
w1-gpio-custom create platform structure for w1-gpio module,
but if board use fdt, data is ignored in w1-gpio probe.
This workaround fix the problem.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Thibaut VARÈNE [Sun, 29 Jul 2018 09:07:23 +0000 (11:07 +0200)]
ramips: fix RBM11G name
The device name is corrected to match the hardware-stored (in hard config
flash space) device name.
Tested-by: Tobias Schramm <tobleminer@gmail.com>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Thibaut VARÈNE [Sun, 29 Jul 2018 09:07:21 +0000 (11:07 +0200)]
ramips: fix RBM33G name
The device name is corrected to match the hardware-stored (in hard config
flash space) device name.
Tested-by: Tobias Schramm <tobleminer@gmail.com>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Leon M. George [Mon, 31 Oct 2016 13:55:44 +0000 (14:55 +0100)]
libevent: update to 2.1.8
Signed-off-by: Leon M. George <leon@georgemail.eu>
LoveSy [Mon, 28 May 2018 01:47:19 +0000 (09:47 +0800)]
ramips: mmc: Add SD card support to HC5661A
Tested on HC5661A and it now fixes the issue that when enabling sd card
in HC5661A, the wan and 3 lan ports will down.
Known issue:
- When enabling SD card support, the led light of system will down and the rest 2 lights keep working.
Signed-off-by: LoveSy <shana@zju.edu.cn>
LoveSy [Mon, 28 May 2018 01:46:28 +0000 (09:46 +0800)]
ramips: mmc: Fix init for MT7628AN
There is another thing about crc to do when initialize SD card on
MT7628.
This commit is to fix this init issue.
Signed-off-by: LoveSy <shana@zju.edu.cn>
Rosy Song [Wed, 18 Jul 2018 07:42:56 +0000 (15:42 +0800)]
include: add netdev family support for nftables
Signed-off-by: Rosy Song <rosysong@rosinson.com>
Andy Walsh [Thu, 26 Jul 2018 08:34:33 +0000 (10:34 +0200)]
ncurses: install lib on host build
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
Martin Strobel [Sat, 7 Jul 2018 07:24:30 +0000 (09:24 +0200)]
iptables: add ip[6|]tables-compat packages + libxtables-compat depends on IPTABLES_NFTABLES
allows iptables-compat to use nft packet filtering
allows to translate iptables-style to nft-style
Signed-off-by: Martin Strobel <arctus@crza.de>
Paul Schulz [Thu, 21 Jun 2018 08:49:39 +0000 (18:19 +0930)]
config: Change conf.c remove compiler warnings
Compiler is producing the warning:
warning: format not a string literal and no format arguments
[-Wformat-security]
This patch makes the format a literal string in printf statements.
This with: gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3) in Ubuntu 18.04
Signed-off-by: Paul Schulz <paul@mawsonlakes.org>
Dmitry Tunin [Sat, 28 Jul 2018 14:48:42 +0000 (17:48 +0300)]
igmpproxy: drop SSDP packets
It is insecure to let this type of packets inside
They can e.g. open ports on some other routers with UPnP, etc
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
张鹏 [Tue, 17 Jul 2018 10:14:25 +0000 (18:14 +0800)]
ar71xx:add support for E750G v8
Qxwlan E750G v8 is based on Qualcomm QCA9344.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4G GHz (AR9344)
- 2x 10/100 Mbps Ethernet (PoE support)
- 2x 10/100/1000 Mbps Ethernet
- 7x LED (6 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J23) and LEDs (J2) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
张鹏 [Tue, 17 Jul 2018 10:11:21 +0000 (18:11 +0800)]
ar71xx:add support for E750A v4
Qxwlan E750A v4 is based on Qualcomm QCA9344.
Specification:
- 560/450/225 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 5G GHz (AR9344)
- 2x 10/100 Mbps Ethernet (one port with PoE support)
- 1x miniPCIe slot (USB 2.0 bus only)
- 7x LED (6 driven by GPIO)
- 1x button (reset)
- 1x DC jack for main power input (9-48 V)
- UART (J23) and LEDs (J2) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
张鹏 [Tue, 17 Jul 2018 10:08:10 +0000 (18:08 +0800)]
ar71xx:add support for E558 v2
Qxwlan E558 v2 is based on Qualcomm QCA9558 + AR8327.
Specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 8/16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz (QCA9558)
- 3x 10/100/1000 Mbps Ethernet (one port with PoE support)
- 4x miniPCIe slot (USB 2.0 bus only)
- 1x microSIM slot
- 5x LED (4 driven by GPIO)
- 1x button (reset)
- 1x 3-pos switch
- 1x DC jack for main power input (9-48 V)
- UART (JP5) and LEDs (J8) headers on PCB
Flash instruction (using U-Boot CLI and tftp server):
- Configure PC with static IP 192.168.1.10 and tftp server.
- Rename "sysupgrade" filename to "firmware.bin" and place it in tftp
server directory.
- Connect PC with one of RJ45 ports, power up the board and press
"enter" key to access U-Boot CLI.
- Use the following command to update the device to OpenWrt: "run lfw".
Flash instruction (using U-Boot web-based recovery):
- Configure PC with static IP 192.168.1.xxx(2-254)/24.
- Connect PC with one of RJ45 ports, press the reset button, power up
the board and keep button pressed for around 6-7 seconds, until LEDs
start flashing.
- Open your browser and enter 192.168.1.1, select "sysupgrade" image
and click the upgrade button.
Signed-off-by: 张鹏 <sd20@qxwlan.com>
Daniel Engberg [Tue, 24 Jul 2018 09:09:17 +0000 (11:09 +0200)]
include/verbose.mk: Add sc to failure message
Add sc to build error message
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel F. Dickinson [Thu, 26 Jul 2018 06:57:37 +0000 (02:57 -0400)]
ar71xx: ag71xx: Prevent kernel oops for board def
The driver is written in such a way that with a board defintion that
connects a fixed phy, mdio, and switch in a certain way, a kernel oops could
result because of lack of previously probed mdio bus.
This commit allows for easier debugging in this case by casting the
correct blame with serial console messages.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Daniel F. Dickinson [Wed, 25 Jul 2018 23:15:32 +0000 (19:15 -0400)]
ar71xx: ag71xx: Add connect message: fixed phy
It's a little noisier but makes it obvious when the ar7240 switch was
connected to the MDIO bus, and to which phy device (or the failure
to do so).
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Daniel F. Dickinson [Wed, 25 Jul 2018 23:14:26 +0000 (19:14 -0400)]
ar71xx: ag71xx_phy: Fix compilation for debug messages
NB: Error only appears with ag71xx debug messages and dynamic printk
enabled. This is probably why no one has caught it before.
Previously phy probe debug messages used old (now wrong) functions
to get the phy name for printing. There was also the chance of
a NULL pointer in the event no phy_device was found.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Massimo Tum [Tue, 3 Jul 2018 12:57:41 +0000 (14:57 +0200)]
ath10k: update QCA4019 firmware
With AVM Fritz!Box 4040 and OpenWrt 18.06 RC1 there are many kernel warnings
kern.warn kernel: [87771.917049] ath10k_ahb
a000000.wifi: Invalid VHT mcs 15 peer stats
and there are disconnections when the connected clients are many, at the moment I tried with 16 clients on 2.4 GHz and 8 on 5 GHZ.
Firmware 10.4-3.5.3-00057 fixes these warnings and the problem of disconnections of some clients.
Signed-off-by: Massimo Tum <masnia@tiscali.it>
Chuanhong Guo [Tue, 24 Jul 2018 13:39:25 +0000 (21:39 +0800)]
ath79: Add switch reset definition in dts
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Tue, 24 Jul 2018 13:19:04 +0000 (21:19 +0800)]
ath79: ag71xx: assert a switch reset if defined in dts.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Tue, 17 Jul 2018 09:09:14 +0000 (17:09 +0800)]
ath79: ar724x: Fix reset definition for gmac0/gmac1
reset bit 8 is for builtin switch and bit 12 is marked 'reserved' on datasheet.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Tue, 17 Jul 2018 09:09:14 +0000 (17:09 +0800)]
ath79: ar7240: Update dts for current ag71xx driver
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Tue, 24 Jul 2018 13:23:04 +0000 (21:23 +0800)]
ath79: ag71xx: Explicitly register mdio bus after ag71xx_hw_init() for ar7240
mdio bus isn't a standalone device on ar7240. (and maybe older SoCs?)
Use simple-mfd for ar7241 and later SoCs to get mdio1 ready before gmac0
For ar7240 and older chips, manually create platform device after
ag71xx_hw_init() in ag71xx_probe()to get mdio0 ready between
ag71xx_hw_init() and ag71xx_phy_connect().
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Tue, 17 Jul 2018 09:09:14 +0000 (17:09 +0800)]
ath79: ag71xx: Rework mdio clock settings
Allow specifying desired mdio clock frequency in dts.
Use default frequency around 5MHz for builtin switch and 2MHz for other mdio bus.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Tue, 17 Jul 2018 09:09:14 +0000 (17:09 +0800)]
ath79: ar7242: Update dts for current ag71xx driver
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Tue, 17 Jul 2018 09:09:14 +0000 (17:09 +0800)]
ath79: ar7241: Update dts for current ag71xx driver
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Tue, 17 Jul 2018 09:09:14 +0000 (17:09 +0800)]
ath79: Fix support for TP-LINK Archer C7 v2
Remove mdio1 and phy1 handle. AR8327N is controlled through mdio0.
Add gmac-config for Archer C7.
Remove ucidef_set_interfaces_lan_wan. They can be determined by config_generate automatically.
The following are for adding support for WDR4900 v2/Archer C7 v1 and other
devices that shared the same machine file in ar71xx:
Move mtd partitions to archer-c7-v2.dts. Only Archer C7 v2 has 16M flash.
Flash on Archer C7 v1/TL-WDR4900 v2 is 8M.
Add label for wlan leds. The default trigger for archer c7/wdr4900 is different.
Move wlan5g led to archer-c7-v2.dts. 5G led on WDR4900 is connected to ar9380.
Move rfkill definition to archer-c7-v2.dts. There is no such a button on wdr4900 v2.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Tue, 17 Jul 2018 09:09:14 +0000 (17:09 +0800)]
ath79: qca955x: Update dts for current ag71xx driver
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Tue, 17 Jul 2018 09:09:14 +0000 (17:09 +0800)]
ath79: qca956x: Update dts for current ag71xx driver
enable mdio1 by default because mdio1 node is a subnode of eth1
and eth1 node is a "simple-mfd", which makes mdio1 disabled when
eth1 isn't enabled.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Tue, 17 Jul 2018 09:09:14 +0000 (17:09 +0800)]
ath79: qca953x: Add chosen node and specify console in bootargs
Most qca devices use 115200n8 as it's default uart baudrate.
Add 'chosen' node for qca953x like other SoCs in ath79 target.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Tue, 17 Jul 2018 09:09:14 +0000 (17:09 +0800)]
ath79: qca953x: Update dts for current ag71xx driver
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Lucian Cristian [Tue, 17 Jul 2018 09:09:14 +0000 (17:09 +0800)]
ath79: update qca9533 to new irq driver
Commit
c7efc93 renamed controller name
to qca,ar9340-intc and added some functions but qca9533.dtsi was overlooked.
Correct the dtsi and adust it to the new format
Add gmac and correct reset for cascaded irq and build-in switch
Also add the reference clock to soc dtsi so we don't have to have it in every dts
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
Remove switch reset definition
Fix gmac compatible string (We only need SW_PHY_SWAP and SW_PHY_ADDR_SWAP on qca953x so use ar9330-gmac instead of ar9340-gmac.)
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
projects / openwrt / openwrt.git / log