openwrt/openwrt.git
6 years agosunxi: remove mainlined patches
Zoltan Herpai [Mon, 14 Apr 2014 21:36:39 +0000 (21:36 +0000)]
sunxi: remove mainlined patches

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40512

6 years agods-lite: disable NAT according to RFC 7084
Steven Barth [Mon, 14 Apr 2014 10:11:54 +0000 (10:11 +0000)]
ds-lite: disable NAT according to RFC 7084

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 40511

6 years agofirewall: add support for nat-rules and netifd-proto-originating rules
Steven Barth [Mon, 14 Apr 2014 10:11:34 +0000 (10:11 +0000)]
firewall: add support for nat-rules and netifd-proto-originating rules

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 40510

6 years agoar71xx: rb91x: fix ethernet packet loss issues
Gabor Juhos [Sun, 13 Apr 2014 20:41:52 +0000 (20:41 +0000)]
ar71xx: rb91x: fix ethernet packet loss issues

The RB91x boards are suffering from ethernet packet loss after a cold
boot. The cause of the problem is that the AR8035 PHYs requires special
register settings to work reliably on these boards.

Enable the RGMII TX, RX delays and disable SmartEE functionality of
the AR8035 PHYs. Also enable the RXD delay in the ETH_CFG register
to fix the issue.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40509

6 years agoar71xx/mikrotik: enable the AT803x PHY driver
Gabor Juhos [Sun, 13 Apr 2014 20:41:51 +0000 (20:41 +0000)]
ar71xx/mikrotik: enable the AT803x PHY driver

It will be used on the RB91x boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40508

6 years agoar71xx: allow to configure AR803x PHYs via platform data
Gabor Juhos [Sun, 13 Apr 2014 20:41:50 +0000 (20:41 +0000)]
ar71xx: allow to configure AR803x PHYs via platform data

Add a patch for the at803x phy driver, in order to be able
to configure some register settings via platform data.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40507

6 years agoar71xx: add phy_mmd_{read,write} helpers
Gabor Juhos [Sun, 13 Apr 2014 20:41:48 +0000 (20:41 +0000)]
ar71xx: add phy_mmd_{read,write} helpers

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40506

6 years agoar71xx: enable console on the RB91x boards
Gabor Juhos [Sun, 13 Apr 2014 20:41:42 +0000 (20:41 +0000)]
ar71xx: enable console on the RB91x boards

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40505

6 years agoralink: add port_init for rt2880
John Crispin [Sun, 13 Apr 2014 18:01:08 +0000 (18:01 +0000)]
ralink: add port_init for rt2880

Forgotten patch to fix ethernet for rt2880.
Based on previously submitted patch from Claudio.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40504

6 years agoiw: sync nl80211.h (fixes settting antenna_gain)
Felix Fietkau [Sun, 13 Apr 2014 09:53:51 +0000 (09:53 +0000)]
iw: sync nl80211.h (fixes settting antenna_gain)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40503

6 years agoar71xx: add profile and build image for the ZyXEL NBG6716 board
Gabor Juhos [Sun, 13 Apr 2014 08:29:09 +0000 (08:29 +0000)]
ar71xx: add profile and build image for the ZyXEL NBG6716 board

Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
[juhosg: remove the non-existing zyxelnand subtarget specific stuff]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40502

6 years agouboot-envtools: add support for the ZyXEL NBG6716 board
Gabor Juhos [Sun, 13 Apr 2014 08:29:08 +0000 (08:29 +0000)]
uboot-envtools: add support for the ZyXEL NBG6716 board

Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40501

6 years agoar71xx: add user-space support for the ZyXEL NBG6716 board
Gabor Juhos [Sun, 13 Apr 2014 08:29:07 +0000 (08:29 +0000)]
ar71xx: add user-space support for the ZyXEL NBG6716 board

Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
[juhosg: use zyxel prefix in LED names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40500

6 years agoar71xx: add kernel support for ZyXEL NBG 6716
Gabor Juhos [Sun, 13 Apr 2014 08:29:05 +0000 (08:29 +0000)]
ar71xx: add kernel support for ZyXEL NBG 6716

With this patch OpenWRT supports the following on the ZyXEL NBG 6716:
-WiFi 2G (ath9k)
-WiFi 5G (ath10k)
-NAND flash
-2 Ethernet interfaces
-USB 2.0
-LEDs including switch
-reasonale defaults at first boot

Signed-off-by: André Valentin <avalentin@marcant.net>
Patchwork: http://patchwork.openwrt.org/patch/5101/
[juhosg:
  - rename and refresh kernel patch,
  - fix a few typos,
  - change button key codes,
  - use zyxel prefix in LED names]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40499

6 years agolantiq: enable switch on td8970
John Crispin [Sat, 12 Apr 2014 21:22:21 +0000 (21:22 +0000)]
lantiq: enable switch on td8970

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40498

6 years ago802.11s: fix authsae support in netifd
John Crispin [Sat, 12 Apr 2014 21:22:17 +0000 (21:22 +0000)]
802.11s: fix authsae support in netifd

This patch implements support for 802.11s protected mesh wireless networks (using authsae) in the netifd framework.

Until meshd-nl80211 implements a proper -P option for the PID file, this uses shell backgrounding in order to be able to get the PID for the process.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 40497

6 years agorpcd: update to the latest version
John Crispin [Sat, 12 Apr 2014 21:22:12 +0000 (21:22 +0000)]
rpcd: update to the latest version

This is required to make object "session" procedure "access" dump ACLs
when no "object" or no "function" parameters are passed.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 40496

6 years agoFix ARV7519RW images
John Crispin [Sat, 12 Apr 2014 21:22:08 +0000 (21:22 +0000)]
Fix ARV7519RW images

This patch moves ARV7519RW definitions to VR9 section from the AR9 section and removes a whitespace that breaks jffs2 image generation.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 40495

6 years agoFix Asus rt-n15 board support
John Crispin [Sat, 12 Apr 2014 21:22:04 +0000 (21:22 +0000)]
Fix Asus rt-n15 board support

* gpio leds and buttons
* ethernet

Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40494

6 years agort2880 DT fixes
John Crispin [Sat, 12 Apr 2014 21:22:00 +0000 (21:22 +0000)]
rt2880 DT fixes

* add pinctrl
* fix ethernet port
* make wifi available by default

Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40493

6 years agoFix pinmux-rt2880
John Crispin [Sat, 12 Apr 2014 21:21:56 +0000 (21:21 +0000)]
Fix pinmux-rt2880

The last arg to FUNC() is count, not last pin.

Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40492

6 years agoAdd wmac clock for rt2880
John Crispin [Sat, 12 Apr 2014 21:21:53 +0000 (21:21 +0000)]
Add wmac clock for rt2880

Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40491

6 years agosparse: add as a new package selectable from the config
John Crispin [Sat, 12 Apr 2014 21:21:49 +0000 (21:21 +0000)]
sparse: add as a new package selectable from the config

This change does multiple things, all related to enable sparse usage as
a static analysis tool selectable from the OpenWrt configuration:
*add a KERNEL_SPARSE option in the config to add sparse to the kernel
 build (through the C=1 option usage)
*add sparse as a new host tools. It will get selected automatically when
 the above option will be enabled

Signed-off-by: Mathieu Olivari <mathieu@qca.qualcomm.com>
SVN-Revision: 40490

6 years agoDon't try to generate whr-g300n image if it's going to be more than 4M
John Crispin [Sat, 12 Apr 2014 21:21:44 +0000 (21:21 +0000)]
Don't try to generate whr-g300n image if it's going to be more than 4M

Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 40489

6 years agouboot-lantiq: enable parallel building
John Crispin [Sat, 12 Apr 2014 21:21:40 +0000 (21:21 +0000)]
uboot-lantiq: enable parallel building

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40488

6 years agouboot-lantiq: reuse/copy VR9 GPHY firmware blobs from target/linux/lantiq
John Crispin [Sat, 12 Apr 2014 21:21:35 +0000 (21:21 +0000)]
uboot-lantiq: reuse/copy VR9 GPHY firmware blobs from target/linux/lantiq

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40487

6 years agouboot-lantiq: add packages for AudioCodes MP-252
John Crispin [Sat, 12 Apr 2014 21:21:31 +0000 (21:21 +0000)]
uboot-lantiq: add packages for AudioCodes MP-252

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40486

6 years agouboot-lantiq: add packages for various Arcadyan boards
John Crispin [Sat, 12 Apr 2014 21:21:26 +0000 (21:21 +0000)]
uboot-lantiq: add packages for various Arcadyan boards

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40485

6 years agouboot-lantiq: add packages for Lantiq EASY80920
John Crispin [Sat, 12 Apr 2014 21:21:23 +0000 (21:21 +0000)]
uboot-lantiq: add packages for Lantiq EASY80920

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40484

6 years agouboot-lantiq: add packages for Lantiq EASY50712
John Crispin [Sat, 12 Apr 2014 21:21:18 +0000 (21:21 +0000)]
uboot-lantiq: add packages for Lantiq EASY50712

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40483

6 years agouboot-lantiq: update to v2013.10
John Crispin [Sat, 12 Apr 2014 21:21:14 +0000 (21:21 +0000)]
uboot-lantiq: update to v2013.10

Patches created from tree:
git@github.com:danielschwierzeck/u-boot-lantiq.git
v2013.10..u-boot-lantiq-v2013.10-openwrt4

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40482

6 years agoar71xx: build firmware image for the WNDR3700 v4 board
Gabor Juhos [Sat, 12 Apr 2014 20:22:41 +0000 (20:22 +0000)]
ar71xx: build firmware image for the WNDR3700 v4 board

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40481

6 years agoar71xx/image: allow to use more arguments for some macros
Gabor Juhos [Sat, 12 Apr 2014 20:00:37 +0000 (20:00 +0000)]
ar71xx/image: allow to use more arguments for some macros

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40480

6 years agoar71xx: wndr4300: indicate WNDR3700v4 in the kernel support files
Gabor Juhos [Sat, 12 Apr 2014 19:58:23 +0000 (19:58 +0000)]
ar71xx: wndr4300: indicate WNDR3700v4 in the kernel support files

Apart from the wireless chip, the WNDR3700 v4 and the WNDR4300
is the same device. Indicate this in the kernel files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40479

6 years agoar71xx: wndr4300: enable 5V power for the USB port
Gabor Juhos [Sat, 12 Apr 2014 19:58:20 +0000 (19:58 +0000)]
ar71xx: wndr4300: enable 5V power for the USB port

The 5V power of the USB is controlled by a GPIO pin of
the external WiFi chip. Setup the GPIO bitmasks in the
platform data of the WiFi chip to ensure that the 5V
power gets enabled by the ath9k driver.

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40478

6 years agoar71xx: wndr4300: use KEY_RFKILL code for the Wireless button
Gabor Juhos [Sat, 12 Apr 2014 17:53:34 +0000 (17:53 +0000)]
ar71xx: wndr4300: use KEY_RFKILL code for the Wireless button

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40477

6 years agoar71xx: add default LED config for WiFi LEDs on the WNDR4300
Gabor Juhos [Sat, 12 Apr 2014 17:42:36 +0000 (17:42 +0000)]
ar71xx: add default LED config for WiFi LEDs on the WNDR4300

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40476

6 years agoar71xx: wndr4300: add LED for 2.4Ghz wifi interface
Gabor Juhos [Sat, 12 Apr 2014 17:42:35 +0000 (17:42 +0000)]
ar71xx: wndr4300: add LED for 2.4Ghz wifi interface

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40475

6 years agoar71xx: wndr4300: select GPIO_OUT functionality for LED GPIOs
Gabor Juhos [Sat, 12 Apr 2014 17:42:34 +0000 (17:42 +0000)]
ar71xx: wndr4300: select GPIO_OUT functionality for LED GPIOs

The bootloader does not initializes the output function
correctly for all LEDs. DO that from the board setup code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40474

6 years agoar71xx: wndr4300: change 'orange' to 'amber' in LED color names
Gabor Juhos [Sat, 12 Apr 2014 17:42:33 +0000 (17:42 +0000)]
ar71xx: wndr4300: change 'orange' to 'amber' in LED color names

The hardware manual says amber so change the color part of
the LED names to reflect that. Also update the constant names.

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40473

6 years agoar71xx: fix typos in TP-Link rssileds definition
Gabor Juhos [Sat, 12 Apr 2014 16:01:45 +0000 (16:01 +0000)]
ar71xx: fix typos in TP-Link rssileds definition

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/5109/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40472

6 years agoar71xx: add rssileds for Ubiquiti XM boards
Gabor Juhos [Sat, 12 Apr 2014 16:01:43 +0000 (16:01 +0000)]
ar71xx: add rssileds for Ubiquiti XM boards

Adds support for the received signal strength indicator LEDs of the
Bullet M, Nanostation M and Rocket M devices.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/5108/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40471

6 years agokernel: mark kmod-usb-phy-nop as hidden to avoid building it where it is not needed
Felix Fietkau [Sat, 12 Apr 2014 15:43:17 +0000 (15:43 +0000)]
kernel: mark kmod-usb-phy-nop as hidden to avoid building it where it is not needed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40470

6 years agohostapd: fix "bad number" error due to missing wps_pbc_in_m1 option (since r39995)
Felix Fietkau [Sat, 12 Apr 2014 14:28:34 +0000 (14:28 +0000)]
hostapd: fix "bad number" error due to missing wps_pbc_in_m1 option (since r39995)

r39995 introduced a new parameter wps_pbc_in_m1 to wifi wps config, but
apparently did not provide a default value 0.

When that option's non-existing value is later evaluated in
/lib/netifd/hostapd.sh, it causes the "bad number" error to be logged in
syslog if user has not set the wps_pbc_in_m1 option. The error materialises
only if user has enabled wps.
    Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio1 (1254): sh: bad number
    Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio0 (1253): sh: bad number

Discussion in bug 15508: https://dev.openwrt.org/ticket/15508#comment:3

Error is caused by line 282:
https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/netifd.sh#L282

My patch sets the parameter's default value to 0, which does nothing. The
default might also be set a bit later in the function, but this felt like the
most clear place to do that.

Signed-off-by hnyman <hannu.nyman@iki.fi>

SVN-Revision: 40469

6 years agox86/net5501: remove broken flag
Gabor Juhos [Sat, 12 Apr 2014 12:05:18 +0000 (12:05 +0000)]
x86/net5501: remove broken flag

According to Christophe, the kernel boots on the Soekris net5501
board.

Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40468

6 years agokernel: update 3.10 to 3.10.36
Gabor Juhos [Sat, 12 Apr 2014 11:59:07 +0000 (11:59 +0000)]
kernel: update 3.10 to 3.10.36

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40467

6 years agoar71xx: fix image generation
Gabor Juhos [Sat, 12 Apr 2014 11:59:05 +0000 (11:59 +0000)]
ar71xx: fix image generation

Move the comments out from the shell script to fix build
breakage introduced in r40464.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40466

6 years agoar71xx: avoid spurious restarts caused by the watchdog on AR934x
Gabor Juhos [Sat, 12 Apr 2014 10:21:04 +0000 (10:21 +0000)]
ar71xx: avoid spurious restarts caused by the watchdog on AR934x

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40465

6 years agoar71xx: add comments for image Makefile.
Gabor Juhos [Sat, 12 Apr 2014 09:52:58 +0000 (09:52 +0000)]
ar71xx: add comments for image Makefile.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5075/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40464

6 years agoar71xx: initial support for TP-Link Archer C7v2
Gabor Juhos [Sat, 12 Apr 2014 09:52:54 +0000 (09:52 +0000)]
ar71xx: initial support for TP-Link Archer C7v2

The C7v2 has 16 MB flash and QCA9880-BR4A rev 2 supported by ath10k driver.
The C7v1 had 8 MB flash and the unsupported QCA9880-AR1A rev 1.

Signed-off-by: Adam Serbinski <adam@serbinski.com>
Patchwork: http://patchwork.openwrt.org/patch/5071/
[juhosg:
 - remove the v2 specific profile add the ath10k driver to the existing
   Archer C7 profile instead. Although on v1 devices it does not change
   the non-working behaviour, but the ath10k driver is useful for users
   whom have replaced the wifi card with a supported one in their units.
 - update image/Makefile to build firmware image for both boards if the
   Archer C7 profile is selected]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40463

6 years agobrcm2708: add missing configuration symbols
Florian Fainelli [Fri, 11 Apr 2014 22:38:54 +0000 (22:38 +0000)]
brcm2708: add missing configuration symbols

Spotted by buildbot and while doing a CONFIG_ALL=y build.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 40462

6 years agolantiq: add an extra partition to the TDW8970 flash that can be used to store the...
John Crispin [Fri, 11 Apr 2014 20:40:34 +0000 (20:40 +0000)]
lantiq: add an extra partition to the TDW8970 flash that can be used to store the vdsl firmware

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40461

6 years agolantiq: more vdsl related cleanups
John Crispin [Fri, 11 Apr 2014 20:40:24 +0000 (20:40 +0000)]
lantiq: more vdsl related cleanups

* atm module needs to be loaded before linux-atm
* use absolute firmware paths
* extended validation
* add a script for mounting an optional firmware partition

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40460

6 years agonetifd: switch to using git.openwrt.org
Felix Fietkau [Fri, 11 Apr 2014 20:28:55 +0000 (20:28 +0000)]
netifd: switch to using git.openwrt.org

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40459

6 years agouci: fix import with not yet existing packages, preserve config permissions on commit...
Jo-Philipp Wich [Fri, 11 Apr 2014 16:14:09 +0000 (16:14 +0000)]
uci: fix import with not yet existing packages, preserve config permissions on commit, fix Lua detection in cmake

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 40458

6 years agouhttpd: do not attempt to configure Lua handler if referenced file does not exist
Jo-Philipp Wich [Fri, 11 Apr 2014 16:13:27 +0000 (16:13 +0000)]
uhttpd: do not attempt to configure Lua handler if referenced file does not exist

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 40457

6 years agonetifd: update to latest version, adds a force_link parameter to bring up an interfac...
Felix Fietkau [Fri, 11 Apr 2014 13:48:41 +0000 (13:48 +0000)]
netifd: update to latest version, adds a force_link parameter to bring up an interface without active device carrier

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40456

6 years agox86_64: add usb support (including storage) to the kernel config
Felix Fietkau [Fri, 11 Apr 2014 13:22:28 +0000 (13:22 +0000)]
x86_64: add usb support (including storage) to the kernel config

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40455

6 years agox86: set default kernel version to 3.10
Felix Fietkau [Fri, 11 Apr 2014 13:22:24 +0000 (13:22 +0000)]
x86: set default kernel version to 3.10

Place the previous selection (3.3.8) into the only subtarget that did
not override it to 3.10

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40454

6 years agox86: remove linux 3.8 support
Felix Fietkau [Fri, 11 Apr 2014 13:22:19 +0000 (13:22 +0000)]
x86: remove linux 3.8 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40453

6 years agogenerate esxi compatible vmdks, too
Imre Kaloz [Fri, 11 Apr 2014 10:19:26 +0000 (10:19 +0000)]
generate esxi compatible vmdks, too

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40452

6 years agoreuqire qemu-img to be installed (the one we have in tools is too old)
Imre Kaloz [Fri, 11 Apr 2014 10:14:57 +0000 (10:14 +0000)]
reuqire qemu-img to be installed (the one we have in tools is too old)

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40451

6 years agonetifd: update to the latest version, fixes some reload issues with proto=static
Felix Fietkau [Thu, 10 Apr 2014 15:21:13 +0000 (15:21 +0000)]
netifd: update to the latest version, fixes some reload issues with proto=static

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40449

6 years agokernel: add a dependency of kmod-r8169 on r8169-firmware
Felix Fietkau [Thu, 10 Apr 2014 14:43:33 +0000 (14:43 +0000)]
kernel: add a dependency of kmod-r8169 on r8169-firmware

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40448

6 years agolinux-firmware: add a new package for firmware (currently only builds r8169 firmware)
Felix Fietkau [Thu, 10 Apr 2014 14:43:30 +0000 (14:43 +0000)]
linux-firmware: add a new package for firmware (currently only builds r8169 firmware)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40447

6 years agobuild: add support for packing version control downloads with xz
Felix Fietkau [Thu, 10 Apr 2014 14:43:26 +0000 (14:43 +0000)]
build: add support for packing version control downloads with xz

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40446

6 years agogeneric: remove obsolete symbol export from block2mtd init patch
Felix Fietkau [Thu, 10 Apr 2014 14:43:22 +0000 (14:43 +0000)]
generic: remove obsolete symbol export from block2mtd init patch

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40445

6 years agox86: try harder to attach block2mtd to fix boot issues on devices with longer delays
Felix Fietkau [Thu, 10 Apr 2014 14:43:17 +0000 (14:43 +0000)]
x86: try harder to attach block2mtd to fix boot issues on devices with longer delays

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40444

6 years agonetifd: fix a regression related to ppp + multiple updates (ipv4 + ipv6)
Felix Fietkau [Thu, 10 Apr 2014 11:31:21 +0000 (11:31 +0000)]
netifd: fix a regression related to ppp + multiple updates (ipv4 + ipv6)

Fixes #15504

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40443

6 years agospecify the adapter type for the vmdk conversion
Imre Kaloz [Thu, 10 Apr 2014 11:09:27 +0000 (11:09 +0000)]
specify the adapter type for the vmdk conversion

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40442

6 years agomac80211: add back missing tx power handling fix (#12750)
Felix Fietkau [Thu, 10 Apr 2014 08:52:33 +0000 (08:52 +0000)]
mac80211: add back missing tx power handling fix (#12750)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40440

6 years agolantiq: move the dsl-modem config to network.@dsl-modem[-1]
John Crispin [Thu, 10 Apr 2014 08:14:33 +0000 (08:14 +0000)]
lantiq: move the dsl-modem config to network.@dsl-modem[-1]

make sure uci_defaults generates a proper uci config for the v/adsl modem

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40439

6 years agolantiq: vdsl init.d script should auto start
John Crispin [Wed, 9 Apr 2014 16:36:28 +0000 (16:36 +0000)]
lantiq: vdsl init.d script should auto start

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40438

6 years agolantiq: cleanup vdsl driver bringup
John Crispin [Wed, 9 Apr 2014 16:31:24 +0000 (16:31 +0000)]
lantiq: cleanup vdsl driver bringup

config interface 'wan'
# a, b, j
option annex b
# a, b, av, bv
option tone b
# vdsl.bin
option firmware
# atm, ptm
option xfer_mode atm

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40437

6 years agolantiq: make dsl_notify.sh executable
John Crispin [Wed, 9 Apr 2014 16:31:14 +0000 (16:31 +0000)]
lantiq: make dsl_notify.sh executable

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40436

6 years agoodhcpd: use correct defaults for interfaces not in UCI
Steven Barth [Wed, 9 Apr 2014 12:29:43 +0000 (12:29 +0000)]
odhcpd: use correct defaults for interfaces not in UCI

SVN-Revision: 40435

6 years agoenable native KVM and VMware drivers
Imre Kaloz [Wed, 9 Apr 2014 11:54:44 +0000 (11:54 +0000)]
enable native KVM and VMware drivers

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40434

6 years agoupgrade to 3.14
Imre Kaloz [Wed, 9 Apr 2014 11:46:18 +0000 (11:46 +0000)]
upgrade to 3.14

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40433

6 years agoodhcp6c: fix recovering from status where all addresses have been lost
Steven Barth [Wed, 9 Apr 2014 06:57:04 +0000 (06:57 +0000)]
odhcp6c: fix recovering from status where all addresses have been lost

SVN-Revision: 40432

6 years agomac80211: fix warnings triggered by tx power changes when using WDS AP (#15491)
Felix Fietkau [Tue, 8 Apr 2014 22:11:27 +0000 (22:11 +0000)]
mac80211: fix warnings triggered by tx power changes when using WDS AP (#15491)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40430

6 years agomac80211: fix user antenna gain calculation
Felix Fietkau [Tue, 8 Apr 2014 22:11:23 +0000 (22:11 +0000)]
mac80211: fix user antenna gain calculation

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40429

6 years agoath9k: fix AP mode crash issues
Felix Fietkau [Tue, 8 Apr 2014 22:11:19 +0000 (22:11 +0000)]
ath9k: fix AP mode crash issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40428

6 years agoath9k: fix some ANI related stability issues
Felix Fietkau [Tue, 8 Apr 2014 22:11:13 +0000 (22:11 +0000)]
ath9k: fix some ANI related stability issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40427

6 years agobase-files: add back missing function for find_mtd_part to /lib/functions.sh (fixes...
Felix Fietkau [Tue, 8 Apr 2014 21:17:49 +0000 (21:17 +0000)]
base-files: add back missing function for find_mtd_part to /lib/functions.sh (fixes #15496)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40426

6 years agobrcm47xx: refresh patches
Hauke Mehrtens [Tue, 8 Apr 2014 19:51:36 +0000 (19:51 +0000)]
brcm47xx: refresh patches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40425

6 years agokernel: bgmac: rework patch checking packet length
Hauke Mehrtens [Tue, 8 Apr 2014 19:50:17 +0000 (19:50 +0000)]
kernel: bgmac: rework patch checking packet length

This bgmac patch was an attempt to fix/workaround bug reported in
https://dev.openwrt.org/ticket/7198 noticed on WNR3500L.
Patch assumed length reported by the hardware was 0 and was trying to
read it until getting a different value. This was actually the opposite.
Lenghts were some invalid & huge values that resulted in skb_over_panic.
For example:
skbuff: skb_over_panic: text:83b21074 len:57222 (...)
skbuff: skb_over_panic: text:87af1024 len:43226 (...)
skbuff: skb_over_panic: text:87af5024 len:8739 (...)

So instead of that not-working patch checking for 0, write a new one
checking for huge values. In case something like that happens, dump
hardware state and drop the packet.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 40424

6 years agods-lite: compatibility with ISPs that only offer public PDs
Steven Barth [Tue, 8 Apr 2014 06:19:37 +0000 (06:19 +0000)]
ds-lite: compatibility with ISPs that only offer public PDs

SVN-Revision: 40422

6 years agoOpenSSL: update to 1.0.1g
Steven Barth [Tue, 8 Apr 2014 05:24:36 +0000 (05:24 +0000)]
OpenSSL: update to 1.0.1g

This fixes the Heartbleed bug (CVE-2014-0160).

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 40421

6 years agobase-files: the ubi tol should be installed when jumping to ram_fs
John Crispin [Mon, 7 Apr 2014 15:35:20 +0000 (15:35 +0000)]
base-files: the ubi tol should be installed when jumping to ram_fs

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40420

6 years agoralink: fix WHR-300HP2 mtd size
John Crispin [Mon, 7 Apr 2014 15:10:26 +0000 (15:10 +0000)]
ralink: fix WHR-300HP2 mtd size

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40419

6 years agolantiq: there is a V2 of VG3503J that needs a newer fe phy firmware
John Crispin [Mon, 7 Apr 2014 15:10:22 +0000 (15:10 +0000)]
lantiq: there is a V2 of VG3503J that needs a newer fe phy firmware

this should really be auto detected by the kernel, lets used this workaround until the real
solution is ready

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40418

6 years agokernel: add a ubi forced detach ioctl
John Crispin [Mon, 7 Apr 2014 15:10:18 +0000 (15:10 +0000)]
kernel: add a ubi forced detach ioctl

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40417

6 years agobase-files: make use of new fstools
John Crispin [Mon, 7 Apr 2014 15:10:15 +0000 (15:10 +0000)]
base-files: make use of new fstools

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40416

6 years agofstools: update to latest git HEAD
John Crispin [Mon, 7 Apr 2014 15:10:07 +0000 (15:10 +0000)]
fstools: update to latest git HEAD

this adds the /sbin/ubi tool that can be used for sysupgrading ubi volumes

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40415

6 years agonetifd: update to the latest version, fixes a l3_dev handling regression leading...
Felix Fietkau [Mon, 7 Apr 2014 11:12:06 +0000 (11:12 +0000)]
netifd: update to the latest version, fixes a l3_dev handling regression leading to a crash

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40414

6 years agoar71xx: move some always-used led related functionality from kmod packages to the...
Felix Fietkau [Mon, 7 Apr 2014 10:44:52 +0000 (10:44 +0000)]
ar71xx: move some always-used led related functionality from kmod packages to the kernel image

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40413

6 years ago/lib/functions.sh: remove config_rename()
Felix Fietkau [Mon, 7 Apr 2014 10:29:51 +0000 (10:29 +0000)]
/lib/functions.sh: remove config_rename()

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40412

6 years ago/lib/functions.sh: move rarely used mtd and macaddr related functions to /lib/functio...
Felix Fietkau [Mon, 7 Apr 2014 10:29:47 +0000 (10:29 +0000)]
/lib/functions.sh: move rarely used mtd and macaddr related functions to /lib/functions/system.sh

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40411

6 years ago/lib/functions.sh: remove jffs2_mark_erase()
Felix Fietkau [Mon, 7 Apr 2014 10:29:42 +0000 (10:29 +0000)]
/lib/functions.sh: remove jffs2_mark_erase()

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40410

6 years agobase-files: remove config_clear() and list_remove()
Felix Fietkau [Mon, 7 Apr 2014 10:01:59 +0000 (10:01 +0000)]
base-files: remove config_clear() and list_remove()

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40409