openwrt/openwrt.git
8 years agoAdd xorg feed to feeds.conf.default
Michael Büsch [Wed, 16 Nov 2011 16:05:23 +0000 (16:05 +0000)]
Add xorg feed to feeds.conf.default

SVN-Revision: 29188

8 years agobase-files: rewrite killing of nonessential services to not rely on top, use the...
Jo-Philipp Wich [Wed, 16 Nov 2011 15:01:18 +0000 (15:01 +0000)]
base-files: rewrite killing of nonessential services to not rely on top, use the proc filesystem only

SVN-Revision: 29187

8 years agobusybox: fix empty password detection in telnetd init (#10432)
Jo-Philipp Wich [Wed, 16 Nov 2011 13:17:35 +0000 (13:17 +0000)]
busybox: fix empty password detection in telnetd init (#10432)

SVN-Revision: 29183

8 years agopackage/ppp: fix typo in r28868 (closes: #10429)
Nicolas Thill [Tue, 15 Nov 2011 23:40:39 +0000 (23:40 +0000)]
package/ppp: fix typo in r28868 (closes: #10429)

SVN-Revision: 29165

8 years agoinclude bridge and 8021q modules by default
Florian Fainelli [Tue, 15 Nov 2011 22:24:22 +0000 (22:24 +0000)]
include bridge and 8021q modules by default

SVN-Revision: 29164

8 years agoallow building 8021q and bridge as modules
Florian Fainelli [Tue, 15 Nov 2011 22:24:18 +0000 (22:24 +0000)]
allow building 8021q and bridge as modules

SVN-Revision: 29163

8 years agokmod-r6040 depends on kmod-libphy
Florian Fainelli [Tue, 15 Nov 2011 19:15:42 +0000 (19:15 +0000)]
kmod-r6040 depends on kmod-libphy

SVN-Revision: 29162

8 years agolantiq: add runtime generation of /etc/config/network
John Crispin [Tue, 15 Nov 2011 18:21:00 +0000 (18:21 +0000)]
lantiq: add runtime generation of /etc/config/network

SVN-Revision: 29161

8 years agobusybox: revert accidentally committed debugging flag
Jo-Philipp Wich [Tue, 15 Nov 2011 17:54:02 +0000 (17:54 +0000)]
busybox: revert accidentally committed debugging flag

SVN-Revision: 29158

8 years agobusybox: fix hexdump segmentation fault with an empty leading format unit
Jo-Philipp Wich [Tue, 15 Nov 2011 17:38:55 +0000 (17:38 +0000)]
busybox: fix hexdump segmentation fault with an empty leading format unit

SVN-Revision: 29156

8 years agoath9k: reorganize patches, reset hardware after full sleep (fixes #10349)
Felix Fietkau [Tue, 15 Nov 2011 14:53:21 +0000 (14:53 +0000)]
ath9k: reorganize patches, reset hardware after full sleep (fixes #10349)

SVN-Revision: 29155

8 years agouhttpd: prevent linking uhttpd binary against crypto libraries
Jo-Philipp Wich [Tue, 15 Nov 2011 10:17:59 +0000 (10:17 +0000)]
uhttpd: prevent linking uhttpd binary against crypto libraries

SVN-Revision: 29152

8 years agobroadcom-wl: align RADIUS options with r26482, patch by Etienne Champetier <etienne...
Jo-Philipp Wich [Mon, 14 Nov 2011 21:37:53 +0000 (21:37 +0000)]
broadcom-wl: align RADIUS options with r26482, patch by Etienne Champetier <etienne.champetier@free.fr>

SVN-Revision: 29136

8 years agoath9k: do not put the hardware to full-sleep while tx is pending
Felix Fietkau [Mon, 14 Nov 2011 21:21:24 +0000 (21:21 +0000)]
ath9k: do not put the hardware to full-sleep while tx is pending

SVN-Revision: 29133

8 years agoath9k: rework radio stop/start cleanup, avoid duplicate rx/tx stop, avoid early phy...
Felix Fietkau [Mon, 14 Nov 2011 21:21:03 +0000 (21:21 +0000)]
ath9k: rework radio stop/start cleanup, avoid duplicate rx/tx stop, avoid early phy stop

SVN-Revision: 29132

8 years agobase-files: prime root password with "x" to notify programs that there is a shadow...
Jo-Philipp Wich [Mon, 14 Nov 2011 19:02:01 +0000 (19:02 +0000)]
base-files: prime root password with "x" to notify programs that there is a shadow record, fix /bin/login.sh password detection accordingly. Solves broken key based dropbear login with empty password after r28935.

SVN-Revision: 29130

8 years agolantiq: fix falcon build breakage
John Crispin [Mon, 14 Nov 2011 18:55:58 +0000 (18:55 +0000)]
lantiq: fix falcon build breakage

dev-wifi-rt2x00 fails to build on falcon due to missing pci

SVN-Revision: 29129

8 years agoar71xx: fix USB LED on the DB120 board
Gabor Juhos [Mon, 14 Nov 2011 17:43:15 +0000 (17:43 +0000)]
ar71xx: fix USB LED on the DB120 board

SVN-Revision: 29126

8 years agoar71xx: add a function for selecting output signal on a given GPIO pin
Gabor Juhos [Mon, 14 Nov 2011 17:43:14 +0000 (17:43 +0000)]
ar71xx: add a function for selecting output signal on a given GPIO pin

SVN-Revision: 29125

8 years agoar71xx: fix GPIO function handling on AR934x
Gabor Juhos [Mon, 14 Nov 2011 17:43:13 +0000 (17:43 +0000)]
ar71xx: fix GPIO function handling on AR934x

SVN-Revision: 29124

8 years agoar71xx: add AR71XX_ prefix to GPIO_REG_* defines
Gabor Juhos [Mon, 14 Nov 2011 17:43:11 +0000 (17:43 +0000)]
ar71xx: add AR71XX_ prefix to GPIO_REG_* defines

SVN-Revision: 29123

8 years agoar71xx: merge nand scan patch
Gabor Juhos [Mon, 14 Nov 2011 17:43:10 +0000 (17:43 +0000)]
ar71xx: merge nand scan patch

SVN-Revision: 29122

8 years agomac80211: enable support for RaLink Rt53xx USB devices in rt2800usb
Felix Fietkau [Mon, 14 Nov 2011 14:06:37 +0000 (14:06 +0000)]
mac80211: enable support for RaLink Rt53xx USB devices in rt2800usb

The driver works quite nice and stable for me using a RaLink Rt5370 USB device.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29116

8 years agonetifd: update to latest version, fixes tcp connection loss issues on dhcp rekey
Felix Fietkau [Mon, 14 Nov 2011 14:06:32 +0000 (14:06 +0000)]
netifd: update to latest version, fixes tcp connection loss issues on dhcp rekey

SVN-Revision: 29115

8 years agouci: update to latest git rev 7289b2d69aaffa9299b47aaaa0da1e9969ace6c1
Jo-Philipp Wich [Mon, 14 Nov 2011 13:18:09 +0000 (13:18 +0000)]
uci: update to latest git rev 7289b2d69aaffa9299b47aaaa0da1e9969ace6c1

SVN-Revision: 29111

8 years agoar71xx: fix a compiler warning
Gabor Juhos [Mon, 14 Nov 2011 13:07:47 +0000 (13:07 +0000)]
ar71xx: fix a compiler warning

SVN-Revision: 29110

8 years agoar71xx: fix GPIO count for AR934x
Gabor Juhos [Mon, 14 Nov 2011 13:07:45 +0000 (13:07 +0000)]
ar71xx: fix GPIO count for AR934x

SVN-Revision: 29109

8 years agoar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
Gabor Juhos [Mon, 14 Nov 2011 11:49:53 +0000 (11:49 +0000)]
ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X

SVN-Revision: 29108

8 years agoar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
Gabor Juhos [Mon, 14 Nov 2011 11:49:51 +0000 (11:49 +0000)]
ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling

SVN-Revision: 29107

8 years agoar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
Gabor Juhos [Mon, 14 Nov 2011 11:49:49 +0000 (11:49 +0000)]
ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines

SVN-Revision: 29106

8 years agoar71xx: add an irq parameter for ar724x_pcibios_init
Gabor Juhos [Mon, 14 Nov 2011 11:49:47 +0000 (11:49 +0000)]
ar71xx: add an irq parameter for ar724x_pcibios_init

SVN-Revision: 29105

8 years agoar71xx: remove hardwired interface parameters from mach-* files
Gabor Juhos [Mon, 14 Nov 2011 07:38:09 +0000 (07:38 +0000)]
ar71xx: remove hardwired interface parameters from mach-* files

SVN-Revision: 29103

8 years agoar71xx: force hardwired interface parameters in ar71xx_add_device_eth
Gabor Juhos [Mon, 14 Nov 2011 07:38:07 +0000 (07:38 +0000)]
ar71xx: force hardwired interface parameters in ar71xx_add_device_eth

SVN-Revision: 29102

8 years agoar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
Gabor Juhos [Mon, 14 Nov 2011 07:38:05 +0000 (07:38 +0000)]
ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth

SVN-Revision: 29101

8 years agobuild images for Pirelli A226M (#10409)
Florian Fainelli [Sun, 13 Nov 2011 19:19:22 +0000 (19:19 +0000)]
build images for Pirelli A226M (#10409)

SVN-Revision: 29045

8 years agoregister uart0 on DWV-S0 boards (#10409)
Florian Fainelli [Sun, 13 Nov 2011 19:19:18 +0000 (19:19 +0000)]
register uart0 on DWV-S0 boards (#10409)

SVN-Revision: 29044

8 years agorefresh 3.0 patches
Florian Fainelli [Sun, 13 Nov 2011 19:19:14 +0000 (19:19 +0000)]
refresh 3.0 patches

SVN-Revision: 29043

8 years agorefresh 2.6.39 patches
Florian Fainelli [Sun, 13 Nov 2011 19:19:10 +0000 (19:19 +0000)]
refresh 2.6.39 patches

SVN-Revision: 29042

8 years agorename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch
Florian Fainelli [Sun, 13 Nov 2011 19:19:05 +0000 (19:19 +0000)]
rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch

SVN-Revision: 29041

8 years agofix typo, load ip17xx switch module
Florian Fainelli [Sun, 13 Nov 2011 18:41:26 +0000 (18:41 +0000)]
fix typo, load ip17xx switch module

SVN-Revision: 29039

8 years agoar71xx: enable has_gbit flag on AR724{0,1}
Gabor Juhos [Sun, 13 Nov 2011 17:36:36 +0000 (17:36 +0000)]
ar71xx: enable has_gbit flag on AR724{0,1}

SVN-Revision: 29026

8 years agoar71xx: fixup onboard PCIe chip registration on the DB120 board
Gabor Juhos [Sun, 13 Nov 2011 12:48:03 +0000 (12:48 +0000)]
ar71xx: fixup onboard PCIe chip registration on the DB120 board

SVN-Revision: 29022

8 years agoar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
Gabor Juhos [Sun, 13 Nov 2011 12:48:01 +0000 (12:48 +0000)]
ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed

SVN-Revision: 29021

8 years agomadwifi: rename patch from ifxmips -> lantiq
John Crispin [Sun, 13 Nov 2011 12:10:52 +0000 (12:10 +0000)]
madwifi: rename patch from ifxmips -> lantiq

SVN-Revision: 29020

8 years agouboot-lantiq: not all configs were using lzma for compression, add gigaset ramboot...
John Crispin [Sun, 13 Nov 2011 12:09:34 +0000 (12:09 +0000)]
uboot-lantiq: not all configs were using lzma for compression, add gigaset ramboot image

Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
SVN-Revision: 29019

8 years agoinclude/kernel.mk: don't check for modules.builtin on 2.6.32-
Jonas Gorski [Sun, 13 Nov 2011 11:45:09 +0000 (11:45 +0000)]
include/kernel.mk: don't check for modules.builtin on 2.6.32-

modules.builtin is only available in 2.6.33 and later, so fall back to
assuming it's built-in for older kernels.

SVN-Revision: 29018

8 years agoar71xx: ag71xx: add support for getting switch port link status
Gabor Juhos [Sun, 13 Nov 2011 11:27:04 +0000 (11:27 +0000)]
ar71xx: ag71xx: add support for getting switch port link status

SVN-Revision: 29017

8 years agoar71xx: remove mii_ctrl resources of the ethernet devices
Gabor Juhos [Sun, 13 Nov 2011 11:27:03 +0000 (11:27 +0000)]
ar71xx: remove mii_ctrl resources of the ethernet devices

SVN-Revision: 29016

8 years agoar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
Gabor Juhos [Sun, 13 Nov 2011 11:27:01 +0000 (11:27 +0000)]
ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx

SVN-Revision: 29015

8 years agoar71xx: ag71xx: remove unused mii_cfg related functions and defines
Gabor Juhos [Sun, 13 Nov 2011 11:27:00 +0000 (11:27 +0000)]
ar71xx: ag71xx: remove unused mii_cfg related functions and defines

SVN-Revision: 29014

8 years agoar71xx: set MII interface speed from the set_speed callbacks
Gabor Juhos [Sun, 13 Nov 2011 11:26:59 +0000 (11:26 +0000)]
ar71xx: set MII interface speed from the set_speed callbacks

SVN-Revision: 29013

8 years agoar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
Gabor Juhos [Sun, 13 Nov 2011 11:26:57 +0000 (11:26 +0000)]
ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data

Also rename the corresponding callback functions.

SVN-Revision: 29012

8 years agoar71xx: ag71xx: remove MII interface setup code
Gabor Juhos [Sun, 13 Nov 2011 11:26:56 +0000 (11:26 +0000)]
ar71xx: ag71xx: remove MII interface setup code

SVN-Revision: 29011

8 years agoar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
Gabor Juhos [Sun, 13 Nov 2011 11:26:54 +0000 (11:26 +0000)]
ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode

SVN-Revision: 29010

8 years agoar71xx: fix occasional kernel hangs during boot on AR934x
Gabor Juhos [Sun, 13 Nov 2011 11:26:52 +0000 (11:26 +0000)]
ar71xx: fix occasional kernel hangs during boot on AR934x

The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

SVN-Revision: 29009

8 years agoar71xx: refresh kernel patches
Gabor Juhos [Sun, 13 Nov 2011 11:26:51 +0000 (11:26 +0000)]
ar71xx: refresh kernel patches

SVN-Revision: 29008

8 years agolinux: update 3.1 to 3.1.1
Jonas Gorski [Sun, 13 Nov 2011 10:48:05 +0000 (10:48 +0000)]
linux: update 3.1 to 3.1.1

SVN-Revision: 29007

8 years agolantiq: add uci-defaults code for handling leds
John Crispin [Sat, 12 Nov 2011 23:40:21 +0000 (23:40 +0000)]
lantiq: add uci-defaults code for handling leds

SVN-Revision: 29004

8 years agolantiq: add /lib/lantiq.sh and make hotplug handlers use it
John Crispin [Sat, 12 Nov 2011 23:40:16 +0000 (23:40 +0000)]
lantiq: add /lib/lantiq.sh and make hotplug handlers use it

SVN-Revision: 29003

8 years agolantiq: rename leds
John Crispin [Sat, 12 Nov 2011 23:40:12 +0000 (23:40 +0000)]
lantiq: rename leds

SVN-Revision: 29002

8 years agolantiq: split compat headers out of bsp header patch
John Crispin [Sat, 12 Nov 2011 23:40:07 +0000 (23:40 +0000)]
lantiq: split compat headers out of bsp header patch

SVN-Revision: 29001

8 years agolantiq: adds hotplug handler for loading rt2x00 firmware
John Crispin [Sat, 12 Nov 2011 23:40:01 +0000 (23:40 +0000)]
lantiq: adds hotplug handler for loading rt2x00 firmware

SVN-Revision: 29000

8 years agolantiq: adds hotplug handler for handling buttons and makes w303v work with it
John Crispin [Sat, 12 Nov 2011 23:39:56 +0000 (23:39 +0000)]
lantiq: adds hotplug handler for handling buttons and makes w303v work with it

SVN-Revision: 28999

8 years agolantiq: cleanup default package selection
John Crispin [Sat, 12 Nov 2011 23:39:51 +0000 (23:39 +0000)]
lantiq: cleanup default package selection

SVN-Revision: 28998

8 years agolantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it
John Crispin [Sat, 12 Nov 2011 18:41:15 +0000 (18:41 +0000)]
lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it

SVN-Revision: 28994

8 years agokernel: ar8216: add support for the AR8236 switch
Gabor Juhos [Sat, 12 Nov 2011 14:09:52 +0000 (14:09 +0000)]
kernel: ar8216: add support for the AR8236 switch

SVN-Revision: 28993

8 years agokernel: ar8216: move port vlan setup into a separate function
Gabor Juhos [Sat, 12 Nov 2011 14:09:50 +0000 (14:09 +0000)]
kernel: ar8216: move port vlan setup into a separate function

SVN-Revision: 28992

8 years agopackage/base-files: enhance service functions
Nicolas Thill [Sat, 12 Nov 2011 13:53:15 +0000 (13:53 +0000)]
package/base-files: enhance service functions

 * allow matching process by name (useful for processes changing it)
 * check if first argument is executable
 * fix function name used in error messages

SVN-Revision: 28991

8 years agoar71xx: use the button for WPS control on the DB120
Gabor Juhos [Sat, 12 Nov 2011 12:50:20 +0000 (12:50 +0000)]
ar71xx: use the button for WPS control on the DB120

SVN-Revision: 28990

8 years agoar71xx: register the second ethernet interface on the DB120 board
Gabor Juhos [Sat, 12 Nov 2011 12:50:19 +0000 (12:50 +0000)]
ar71xx: register the second ethernet interface on the DB120 board

SVN-Revision: 28989

8 years agoar71xx: implement SoC specific phy interface setup
Gabor Juhos [Sat, 12 Nov 2011 12:50:18 +0000 (12:50 +0000)]
ar71xx: implement SoC specific phy interface setup

SVN-Revision: 28988

8 years agoar71xx: move phy interface setup into a separate function
Gabor Juhos [Sat, 12 Nov 2011 12:50:16 +0000 (12:50 +0000)]
ar71xx: move phy interface setup into a separate function

SVN-Revision: 28987

8 years agoar71xx: register both MDIO bus on the DB120 board
Gabor Juhos [Sat, 12 Nov 2011 12:09:59 +0000 (12:09 +0000)]
ar71xx: register both MDIO bus on the DB120 board

SVN-Revision: 28986

8 years agoar71xx: add AR934X specific MDIO registration code
Gabor Juhos [Sat, 12 Nov 2011 12:09:56 +0000 (12:09 +0000)]
ar71xx: add AR934X specific MDIO registration code

SVN-Revision: 28985

8 years agoar71xx: add a secondary mdio bus
Gabor Juhos [Sat, 12 Nov 2011 12:09:54 +0000 (12:09 +0000)]
ar71xx: add a secondary mdio bus

SVN-Revision: 28984

8 years agoar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*
Gabor Juhos [Sat, 12 Nov 2011 12:09:50 +0000 (12:09 +0000)]
ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*

SVN-Revision: 28983

8 years agoar71xx: add an id argument to ar71xx_add_device_mdio
Gabor Juhos [Sat, 12 Nov 2011 12:09:48 +0000 (12:09 +0000)]
ar71xx: add an id argument to ar71xx_add_device_mdio

SVN-Revision: 28982

8 years agoar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa
Gabor Juhos [Sat, 12 Nov 2011 12:09:42 +0000 (12:09 +0000)]
ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa

SVN-Revision: 28981

8 years agoar71xx: add AR934x specific USB setup
Gabor Juhos [Sat, 12 Nov 2011 10:54:20 +0000 (10:54 +0000)]
ar71xx: add AR934x specific USB setup

SVN-Revision: 28980

8 years agoar71xx: register the first ethernet interface on the DB120 board
Gabor Juhos [Sat, 12 Nov 2011 10:54:18 +0000 (10:54 +0000)]
ar71xx: register the first ethernet interface on the DB120 board

SVN-Revision: 28979

8 years agoar71xx: allow to register ethernet interfaces for AR934X
Gabor Juhos [Sat, 12 Nov 2011 10:54:17 +0000 (10:54 +0000)]
ar71xx: allow to register ethernet interfaces for AR934X

SVN-Revision: 28978

8 years agoar71xx: ag71xx: use fixed link parameters if the mii bus is not registered
Gabor Juhos [Sat, 12 Nov 2011 10:54:16 +0000 (10:54 +0000)]
ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered

SVN-Revision: 28977

8 years agoar71xx: add AR934X specific bootstrap and reset register bits
Gabor Juhos [Sat, 12 Nov 2011 10:54:15 +0000 (10:54 +0000)]
ar71xx: add AR934X specific bootstrap and reset register bits

SVN-Revision: 28976

8 years agoar71xx: add diag support for the DB120 board
Gabor Juhos [Sat, 12 Nov 2011 10:54:10 +0000 (10:54 +0000)]
ar71xx: add diag support for the DB120 board

SVN-Revision: 28975

8 years agoar71xx: fix GPIO direction setup for AR934x
Gabor Juhos [Sat, 12 Nov 2011 10:54:09 +0000 (10:54 +0000)]
ar71xx: fix GPIO direction setup for AR934x

SVN-Revision: 28974

8 years agoar71xx: fix AR934X clock frequency calculation
Gabor Juhos [Sat, 12 Nov 2011 10:54:08 +0000 (10:54 +0000)]
ar71xx: fix AR934X clock frequency calculation

SVN-Revision: 28973

8 years agopackage: add om2p-watchdog script
Gabor Juhos [Sat, 12 Nov 2011 10:54:06 +0000 (10:54 +0000)]
package: add om2p-watchdog script

Based on a patch by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 28972

8 years agoar71xx: generate ubootenv from uci-defaults instead of providing defconfig
Gabor Juhos [Sat, 12 Nov 2011 10:54:04 +0000 (10:54 +0000)]
ar71xx: generate ubootenv from uci-defaults instead of providing defconfig

I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28971

8 years agopjsip: bump to 1.10 and improve ltq_tapi backend
John Crispin [Fri, 11 Nov 2011 22:23:26 +0000 (22:23 +0000)]
pjsip: bump to 1.10 and improve ltq_tapi backend

SVN-Revision: 28963

8 years agolantiq: improve falcon package selection
John Crispin [Fri, 11 Nov 2011 21:59:11 +0000 (21:59 +0000)]
lantiq: improve falcon package selection

SVN-Revision: 28962

8 years agolantiq: fix breakage introduced in 3.1 bump
John Crispin [Fri, 11 Nov 2011 21:59:01 +0000 (21:59 +0000)]
lantiq: fix breakage introduced in 3.1 bump

SVN-Revision: 28961

8 years agobase-files: now that the initial password is completely empty (and not primed with...
Jo-Philipp Wich [Fri, 11 Nov 2011 13:25:31 +0000 (13:25 +0000)]
base-files: now that the initial password is completely empty (and not primed with "!") adjust login.sh for it to make telnetd available again

SVN-Revision: 28943

8 years agopackage/base-files-network: fix udhcpc issues introduced in r28866 (closes: #10383)
Nicolas Thill [Fri, 11 Nov 2011 13:23:29 +0000 (13:23 +0000)]
package/base-files-network: fix udhcpc issues introduced in r28866 (closes: #10383)

SVN-Revision: 28942

8 years agomac80211: add antenna control api for b43
Jo-Philipp Wich [Thu, 10 Nov 2011 23:07:42 +0000 (23:07 +0000)]
mac80211: add antenna control api for b43

SVN-Revision: 28940

8 years agoacx-mac80211: update to 20111030
Florian Fainelli [Thu, 10 Nov 2011 15:31:37 +0000 (15:31 +0000)]
acx-mac80211: update to 20111030

Fixes build failures with Linux 3.1+

SVN-Revision: 28939

8 years agonuke another 2.4 skeleton
Imre Kaloz [Thu, 10 Nov 2011 13:39:06 +0000 (13:39 +0000)]
nuke another 2.4 skeleton

SVN-Revision: 28937

8 years agoenable and use shadow passwords by default
Imre Kaloz [Thu, 10 Nov 2011 12:55:01 +0000 (12:55 +0000)]
enable and use shadow passwords by default

SVN-Revision: 28936

8 years agothe empty root password should be empty ;)
Imre Kaloz [Thu, 10 Nov 2011 12:47:50 +0000 (12:47 +0000)]
the empty root password should be empty ;)

SVN-Revision: 28935

8 years agobase-files, target: assign name to system timeserver section, makes it easier to...
Jo-Philipp Wich [Thu, 10 Nov 2011 12:16:41 +0000 (12:16 +0000)]
base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli

SVN-Revision: 28933

8 years agopackage: kernel: fix typo
Jonas Gorski [Wed, 9 Nov 2011 22:11:51 +0000 (22:11 +0000)]
package: kernel: fix typo

SVN-Revision: 28898