openwrt/openwrt.git
13 months agoscripts/ipkg-build: quash error messages when conffiles.resolved is empty
Yousong Zhou [Thu, 6 Sep 2018 08:00:24 +0000 (08:00 +0000)]
scripts/ipkg-build: quash error messages when conffiles.resolved is empty

When Package/xx/conffiles only contains directories that are empty at
package time, conffiles.resolved will be missing and the following
error messages will appear in the build log.

/home/yousong/git-repo/openwrt/openwrt/scripts/ipkg-build -c -o 0 -g 0 /home/yousong/git-repo/openwrt/openwrt/build_dir/target-mips_24kc_musl/linux-malta_be/openvswitch-2.10.0/ipkg-mips_24kc/openvswitch-common /home/yousong/git-repo/openwrt/openwrt/bin/packages/mips_24kc/packages
mv: cannot stat 'CONTROL/conffiles.resolved': No such file or directory
chmod: cannot access 'CONTROL/conffiles': No such file or directory

It will not break the ipkg-build process.  The change is merely cosmetic
to not cause confusion when reading logs

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(backported from 9e58c20ec9d48ee41a4a306b0cd6d3aece285efd)

13 months agoscripts/metadata.pm: avoid adding dup names in provides list
Yousong Zhou [Wed, 5 Sep 2018 15:29:25 +0000 (15:29 +0000)]
scripts/metadata.pm: avoid adding dup names in provides list

The need arises from building Open vSwitch kernel datapath modules, e.g.

 - kmod-openvswitch from Linux upstream
 - kmod-openvswitch-intree from openvswitch source code

where both provides virtual package "kmod-openvswitch" for userspace
packages to select and depend on

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(backported from 204081670b914795a494929777f09807b15f70f4)

13 months agostrace: fix build on aarch64
Stijn Tintel [Thu, 28 Jun 2018 10:00:10 +0000 (13:00 +0300)]
strace: fix build on aarch64

As of version 4.21, strace enforces mpers by default. The current
implementation of aarch64 compat in strace assumes it's identical to
ARMv7 EABI and therefore tries to enable m32 personality support. As
there is no -m32 support on aarch64, this causes the build to fail.

Restore previous strace behavior to fix build on aarch64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Karl Palsson <karlp@tweak.net.au>
(backported from 067e2f5f1d0102ffb96d3248e42a29e7352cc29c)

13 months agoodhcpd: bump to git HEAD (detect broken hostnames)
Hans Dedecker [Wed, 5 Sep 2018 08:59:23 +0000 (10:59 +0200)]
odhcpd: bump to git HEAD (detect broken hostnames)

881f66b odhcpd: detect broken hostnames
3e17fd9 config: fix odhcpd_attrs array size

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from ecc3165cbc6e2f51a685962cac6074f63097fa05)

13 months agohostapd: fix build of wpa-supplicant-p2p
Alexander Couzens [Mon, 3 Sep 2018 19:42:02 +0000 (21:42 +0200)]
hostapd: fix build of wpa-supplicant-p2p

VARIANT:= got removed by accident.

Fixes: 3838b16943c6 ("hostapd: fix conflicts hell")
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
(backported from 967d6460c02810c9f4ec6f8c6894057995a03bf9)

13 months agobuild: add support for enabling the rootfs/boot partition size option via target...
Felix Fietkau [Sun, 26 Aug 2018 17:36:33 +0000 (19:36 +0200)]
build: add support for enabling the rootfs/boot partition size option via target feature

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from 00f030a9c67c551e675364d73234a4cba273b420)

13 months agoppp: remove hardcoded lcp-echo-failure, lcp-echo-interval values
Jo-Philipp Wich [Thu, 30 Aug 2018 13:08:20 +0000 (15:08 +0200)]
ppp: remove hardcoded lcp-echo-failure, lcp-echo-interval values

OpenWrt used to ship hardcoded defaults for lcp-echo-failure and
lcp-echo-interval in the non-uci /etc/ppp/options file.

These values break uci support for *disabling* LCP echos through
the use of "option keepalive 0" as either omitting the keepalive
option or setting it to 0 will result in no lcp-echo-* flags
getting passed to the pppd cmdline, causing the pppd process to
revert to the defaults in /etc/ppp/options.

Address this issue by letting the uci "keepalive" option default
to the former hardcoded values "5, 1" and by removing the fixed
lcp-echo-failure and lcp-echo-interval settings from the
/etc/ppp/options files.

Ref: https://github.com/openwrt/luci/issues/2112
Ref: https://dev.archive.openwrt.org/ticket/2373.html
Ref: https://bugs.openwrt.org/index.php?do=details&task_id=854
Ref: https://bugs.openwrt.org/index.php?do=details&task_id=1259
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(backported from 555c592304023a0d24216a6d8ed9d525602ae218)

13 months agobase-files: provide more tolerant xterm detection
Paul Wassi [Thu, 23 Aug 2018 07:24:43 +0000 (09:24 +0200)]
base-files: provide more tolerant xterm detection

Set the window title not only in "xterm", but also in
e.g. "xterm-256color", "xterm-color", etc.
The case statement is taken from Debian / Ubuntu.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
(backported from 1bd6b91e0f9f53f13b5a9fa2939674012fe7193f)

13 months agobrcm47xx: Enable USB power on WNDR3400v3
Tuomas Tynkkynen [Sun, 19 Aug 2018 19:11:50 +0000 (22:11 +0300)]
brcm47xx: Enable USB power on WNDR3400v3

WNDR3400v3 needs GPIO 21 pulled high to enable power to USB ports. Add a
kernel patch to do that.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
(backported from 5dd745588edea19846b2bc3a2e6938f139374ea9)

13 months agokernel: add kmod-tcp-bbr
Keith Wong [Thu, 12 Apr 2018 03:21:08 +0000 (11:21 +0800)]
kernel: add kmod-tcp-bbr

This adds support for BBR (Bottleneck Bandwidth and RTT) TCP
congestion control. Applications (e.g. webservers, VPN client/server)
which initiate connections from router side can benefit from this.

This provide an easier way for users to use BBR by selecting /
installing kmod-tcp-bbr instead of altering kernel config and
compiling firmware by themselves.

Signed-off-by: Keith Wong <keithwky@gmail.com>
(backported from 79c233daa4caee1a8af0c7a91e1d4aee96d410e9)

13 months agolibbsd: Update to 0.8.7
Daniel Engberg [Wed, 2 May 2018 08:23:45 +0000 (10:23 +0200)]
libbsd: Update to 0.8.7

Update libbsd to 0.8.7
Remove glibc dependency
Clean up InstallDev and install entries
Use /usr path for consistency
Cherry pick patches from upstream to fix musl compilation

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(backported from e341f45913beac28e5574d470ed79e4b6f9ee255)

13 months agokernel: fix kmod-gpio-mcp23s08 for linux 4.14
Martin Schiller [Fri, 24 Aug 2018 09:35:35 +0000 (11:35 +0200)]
kernel: fix kmod-gpio-mcp23s08 for linux 4.14

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
(backported from a904003b9b5fe2744ee5d5d8718c54d001f1c93e)

13 months agox86/64: enable X86_INTEL_LPSS to select PINCTRL
Martin Schiller [Fri, 24 Aug 2018 09:31:13 +0000 (11:31 +0200)]
x86/64: enable X86_INTEL_LPSS to select PINCTRL

This makes it possible to use the MCP23S08 i/o expander
on x86_64 platforms with linux 4.14.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
(backported from 17f30bfcf7329c1770dc996b0d29934942bb2899)

13 months agox86: geode: Add missing config options
Hauke Mehrtens [Sun, 26 Aug 2018 10:20:24 +0000 (12:20 +0200)]
x86: geode: Add missing config options

This adds a configuration options which is needed now.
Without this patch the geode build will fail.

Fixes: 4eda2fddf2 ("x86/geode: enable X86_INTEL_LPSS to select PINCTRL")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(backported from 0f2787b9ff6976cf4999ed2dbb7debdb53bac2e3)

13 months agox86/geode: enable X86_INTEL_LPSS to select PINCTRL
Martin Schiller [Fri, 24 Aug 2018 09:29:37 +0000 (11:29 +0200)]
x86/geode: enable X86_INTEL_LPSS to select PINCTRL

This makes it possible to use the MCP23S08 i/o expander
on geode platforms with linux 4.14.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
(backported from 4eda2fddf2995c8ade2b1e0faddc8ce1f1e0ec5f)

13 months agox86: add UHCI and XHCI USB host drivers to 4.14
Alex Maclean [Thu, 23 Aug 2018 13:30:36 +0000 (14:30 +0100)]
x86: add UHCI and XHCI USB host drivers to 4.14

Without UHCI a non-trivial number of machines will have no keyboard
without BIOS assistance.

Add XHCI as well in case there are chipsets which don't support legacy
interfaces, and support PCI OHCI controllers also.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
(backported from 894a95fa2df9467afe559c899af741a0c9040953)

13 months agobuild: Unset CDPATH to avoid problems
Thomas Langer [Mon, 20 Aug 2018 10:13:29 +0000 (12:13 +0200)]
build: Unset CDPATH to avoid problems

In some places the output of commands, which include "cd" are used.
In case of CDPATH the new path is printed, which might not be expected.
Disable the variable to avoid these problem.

When CDPATH was set by the user to some value like "export CDPATH=."
the git checkout done by the build system did not work anymore, the
git cloning aborted with such an error message for example:
....
Packing checkout...
tar: /disk/fs1/tmp2/mehrtens/pon-ugw/ugw-haps/openwrt/tmp/dl/ppa-drv-1.0\n@1534240258: Cannot stat: No such file or directory
tar: Date sample file not found
Try 'tar --help' or 'tar --usage' for more information.
.....

To avoid this, this patch makes the build system unset CDPATH inside
the build system, so the build system will still work even when the
user set this variable in his local environment.

Signed-off-by: Thomas Langer <thomas.langer@intel.com>
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from 41faf52b0ffe902381e75a35e886f635321347b5)

13 months agodropbear: backport upstream fix for CVE-2018-15599
Hans Dedecker [Fri, 24 Aug 2018 13:02:24 +0000 (15:02 +0200)]
dropbear: backport upstream fix for CVE-2018-15599

CVE description :
The recv_msg_userauth_request function in svr-auth.c in Dropbear through
2018.76 is prone to a user enumeration vulnerability because username
validity affects how fields in SSH_MSG_USERAUTH messages are handled,
a similar issue to CVE-2018-15473 in an unrelated codebase.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from 2211ee0037764e1c6b1576fe7a0975722cd4acdc)

13 months agosamba36: Enable umdnsd support
Rosen Penev [Fri, 17 Aug 2018 02:32:59 +0000 (19:32 -0700)]
samba36: Enable umdnsd support

Allows discovery without having to use NetBIOS. Useful for mobile devices.

Could eventually throw nbmd away. But that requires Windows 10...

Tested on Fedora 28 with avahi-discover.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(backported from 499773f8efe3357a2076c75c503ebcb42e41dbe6)

13 months agobase-files: create /etc/ethers by default
Luiz Angelo Daros de Luca [Sun, 19 Aug 2018 01:53:07 +0000 (22:53 -0300)]
base-files: create /etc/ethers by default

/etc/ethers is missing on /rom but always created when dnsmasq
runs. It is better to have it in place and avoid an extra change
in flash after firstboot.

It will generate an extra /etc/ethers-opkg when it has changed.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from d810d44e5a88e7ed5a72f8cd39fc57639aa6dbd0)

13 months agomwlwifi: Update to 10.3.8.0-20180810
Daniel Engberg [Fri, 17 Aug 2018 08:00:02 +0000 (10:00 +0200)]
mwlwifi: Update to 10.3.8.0-20180810

Update mwlwifi to 10.3.8.0-20180810

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(backported from e1a1add5178b6a943c6272776ba3af06b3f953a8)

13 months agofirewall: bump to git HEAD
Stijn Tintel [Mon, 13 Aug 2018 19:05:46 +0000 (22:05 +0300)]
firewall: bump to git HEAD

12a7cf9 Add support for DSCP matches and target
06fa692 defaults: use a generic check_kmod() function
1c4d5bc defaults: fix check_kmod() function

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(backported from 03e5dcbf10b1f67a463735efd8db3386f91473fd)

13 months agobase-files: add function to get mac as text from flash
Mathias Kresin [Sat, 11 Aug 2018 08:10:21 +0000 (10:10 +0200)]
base-files: add function to get mac as text from flash

Add a function to get a mac stored as text from flash. The octets of
the mac address need to be separated by any separator supported by
macaddr_canonicalize().

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from dfee452713e6b3c10aafc6174f8087a920b54402)

13 months agobase-files: use consistent coding style
Mathias Kresin [Sat, 11 Aug 2018 08:48:08 +0000 (10:48 +0200)]
base-files: use consistent coding style

Add the opening bracket right after the function name, to do it the
same way for all functions in this file.

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from ec28d2797c1bff4a3a97e54fee648cc56185839a)

13 months agobase-files: make wifi report unknown command
Thibaut VARÈNE [Thu, 9 Aug 2018 18:33:45 +0000 (20:33 +0200)]
base-files: make wifi report unknown command

Avoid having /sbin/wifi silently ignore unknown keywords and execute
"up"; instead display the help message and exit with an error.

Spell out the "up" keyword (which has users), add it to usage output,
and preserve the implicit assumption that runing /sbin/wifi without
argument performs "up".

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
(backported from 78b5764fd8a3c133f0caf170238242b32a97105b)

13 months agoodhcp6c: apply IPv6/ND configuration earlier
Hans Dedecker [Thu, 9 Aug 2018 15:56:19 +0000 (17:56 +0200)]
odhcp6c: apply IPv6/ND configuration earlier

Apply IPv6/ND configuration before proto_send_update so that all config info
is available when netifd is handling the notify_proto ubus call.
In particular this fixes an issue when netifd is updating the downstream IPv6 mtu
as netifd was still using the not yet updated upstream IPv6 mtu to set the
downstream IPv6 mtu

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from 2e02fdb3637c7a0320d230a3232d61e874c1e4d1)

13 months agoustream-ssl: update to latest git HEAD
Eneas U de Queiroz [Mon, 6 Aug 2018 18:19:20 +0000 (18:19 +0000)]
ustream-ssl: update to latest git HEAD

23a3f28 openssl, wolfssl: match mbedTLS ciphersuite list
450ada0 ustream-ssl: Revised security on mbedtls
34b0b80 ustream-ssl: add openssl-1.1.0 compatibility

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
(backported from 33fd1d0d91fe6f0bb639a6fad0f681ba651f8254)

13 months agoimagebuilder: manifest function show stderr
Paul Spooren [Sun, 5 Aug 2018 03:17:29 +0000 (12:17 +0900)]
imagebuilder: manifest function show stderr

This really simplifies debugging, if a package is not found or a feed is
not reachable, a proper stderr is printed. Currently it would only say
`_call_manifest` failed.

Signed-off-by: Paul Spooren <mail@aparcar.org>
(backported from ad5c2897ec054b80549e526ef639dd75548d4747)

13 months agoscripts: time.pl: avoid hard Time::HiRes dependency
Jo-Philipp Wich [Sun, 5 Aug 2018 10:24:01 +0000 (12:24 +0200)]
scripts: time.pl: avoid hard Time::HiRes dependency

Use Time::HiRes when available and fallback to raw syscall interface
when not. If that fails too, simply report 0, 0 as real time.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(backported from a692e4e3de60e1a10906511fb8ef2d14937d4a19)

13 months agobuild: remove GNU time dependency
Jo-Philipp Wich [Sat, 4 Aug 2018 22:06:27 +0000 (00:06 +0200)]
build: remove GNU time dependency

Replace the GNU time program invocation with a simple Perl script reporting
the timing values. Since we require Perl anyway for the build system, we can
as well use that instead of requiring a random GNU utility rarely installed
by default.

Fixes: ff6e62b288 ("build: log time taken by each packages/steps")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(backported from d3ddf6631e491a831617a5ae8b3d7924e47a275a)

13 months agoiwinfo: update to latest Git HEAD
Jo-Philipp Wich [Tue, 31 Jul 2018 18:39:13 +0000 (20:39 +0200)]
iwinfo: update to latest Git HEAD

a514139 build: compile with -ffunction-sections, -fdata-sections and LTO
3c30b17 wl: only invoke nvram executable if it exists
65b8333 Revert "build: compile with -ffunction-sections, -fdata-sections and LTO"

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(backported from fdd6c556ab42d040efcc92a53149e3f8ec357f69)

13 months agowolfssl: disable broken shipped Job server macro
Jo-Philipp Wich [Thu, 23 Aug 2018 18:03:29 +0000 (20:03 +0200)]
wolfssl: disable broken shipped Job server macro

The AX_AM_JOBSERVER macro shipped with m4/ax_am_jobserver.m4 is broken on
plain POSIX shells due to the use of `let`.

Shells lacking `let` will fail to run the generated m4sh code and end up
invoking "make" with "-jyes" as argument, fialing the build.

Since there is no reason in the first place for some random package to
muck with the make job server settings and since we do not want it to
randomly override "-j" either, simply remove references to this defunct
macro to let the build succeed on platforms which not happen to use bash
as default shell.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(backported from a27de701b0250b06302350d25dc514e1b488dc59)

13 months agowolfssl: remove myself as maintainer
Alexandru Ardelean [Mon, 30 Jul 2018 14:03:18 +0000 (17:03 +0300)]
wolfssl: remove myself as maintainer

I no longer have the time, nor the desire to maintain this package.
Remove myself as maintainer.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
(backported from 20346a63f69bbb919ffdf29bc2e77496d01719e3)

13 months agoopenvpn-easy-rsa: update to 3.0.4
Luiz Angelo Daros de Luca [Tue, 27 Mar 2018 05:42:06 +0000 (02:42 -0300)]
openvpn-easy-rsa: update to 3.0.4

Upstream renamed openssl-1.0.cnf to openssl-easyrsa.cnf.
However, pkg kept using openssl-1.0.cnf.

Upstream easyrsa searchs for vars, openssl-*, x509-types in the
same directory as easyrsa script. This was patched to revert
back to static /etc/easy-rsa/ directory (as does OpenSUSE).
EASYRSA_PKI still depends on $PWD.

Move easyrsa from /usr/sbin to /usr/bin as root is not needed.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
(backported from f1bef0596fd2a983386c778a94486782bd272e27)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
13 months agokernel: package x86-optimized crypto-misc modules
Daniel Gimpelevich [Sun, 21 Jan 2018 21:00:12 +0000 (13:00 -0800)]
kernel: package x86-optimized crypto-misc modules

Some of the modules in the crypto-misc package have alternate
implementations optimized for different x86 instruction set extensions,
but only one of these was built for this package until now: twofish-i586.ko

Tested with insmod, on both x86 and x86_64. The modules now have an
autoload, which they previous didn't, loading the dependencies in the
correct order.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
(backported from c762817c9211f439c5da6ea30b6ed828c9861c4f)

13 months agobase-files: do not add relevant sections & options except when ipv6 is support in...
Rosy Song [Sat, 4 Aug 2018 11:01:18 +0000 (19:01 +0800)]
base-files: do not add relevant sections & options except when ipv6 is support in kernel

Signed-off-by: Rosy Song <rosysong@rosinson.com>
(backported from 2b637e5ab8ae24ff4176930f259dce195983d7ea)

13 months agobase-files: sysupgrade: abort if config backup fails
Andreas Ziegler [Fri, 3 Aug 2018 23:56:39 +0000 (01:56 +0200)]
base-files: sysupgrade: abort if config backup fails

Sysupgrade shouldn't proceed, if the backup of the configuration
fails because tar (or gzip) exit with a non-zero code.

Signed-off-by: Andreas Ziegler <dev@andreas-ziegler.de>
(backported from 72489ebeb65fd1e1d77e8d9fbe105827a98dbf03)

13 months agobase-files: fix HOME_URL replace
Chen Minqiang [Thu, 2 Aug 2018 01:10:15 +0000 (09:10 +0800)]
base-files: fix HOME_URL replace

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
(backported from 33bce21bb0f3def5a2516384a8ae16f88b9b193e)

13 months agoinclude: add netdev family support for nftables
Rosy Song [Wed, 18 Jul 2018 07:42:56 +0000 (15:42 +0800)]
include: add netdev family support for nftables

Signed-off-by: Rosy Song <rosysong@rosinson.com>
(backported from b4d4e4ceb56825033dd4c8e401e9250ae5042a99)

13 months agoncurses: install lib on host build
Andy Walsh [Thu, 26 Jul 2018 08:34:33 +0000 (10:34 +0200)]
ncurses: install lib on host build

Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
(backported from 1639ebcb061abb3664e0b80f62f0019e37fda68e)

13 months agoigmpproxy: drop SSDP packets
Dmitry Tunin [Sat, 28 Jul 2018 14:48:42 +0000 (17:48 +0300)]
igmpproxy: drop SSDP packets

It is insecure to let this type of packets inside
They can e.g. open ports on some other routers with UPnP, etc

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
(backported from c128371124ce4d197a5fbc00e42b58e9d82c571e)

13 months agoinclude/verbose.mk: Add sc to failure message
Daniel Engberg [Tue, 24 Jul 2018 09:09:17 +0000 (11:09 +0200)]
include/verbose.mk: Add sc to failure message

Add sc to build error message

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
(backported from 0aaa65075508035bdf6c8fc8fa9a79b94dc5eadc)

13 months agoigmpproxy: add a silent logging option
Dmitry Tunin [Sat, 28 Jul 2018 14:06:28 +0000 (17:06 +0300)]
igmpproxy: add a silent logging option

[0-3](none, minimal[default], more, maximum)

It is not 100% backward compatible, because now 0 disables logging

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
(backported from 7a6b2badfa56cfd833d64f113398198f71fd896e)

13 months agobcm53xx: exit if writing kernel during sysupgrade fails
Rafał Miłecki [Mon, 18 Jun 2018 11:46:04 +0000 (13:46 +0200)]
bcm53xx: exit if writing kernel during sysupgrade fails

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(backported from 93cc44c433fed754bd76f8016a1660a6b932361e)

13 months agobrcm2708: Update brcm2708-gpu-fw package
Christo Nedev [Fri, 1 Jun 2018 14:23:21 +0000 (14:23 +0000)]
brcm2708: Update brcm2708-gpu-fw package

Problem - rapsberry pi 3 b/b+ does not boot with bcm2710 images!

How Raspberry Pi boots Actualy?

When Raspberry is switched on GPU is activated.
1. GPU execute First stage bootloader from ROM.
First stage bootloader mount the FAT boot partition on the SD card
and execute second stage bootloader (bootcode.bin).
2. Second stage bootloader (bootcode.bin) activate SDRAM.
Load the GPU firmware (start.elf).
3. GPU firmware (start.elf)
  a) display Rainbow splash.
  b) read firmware configuration file config.txt and
     split the RAM using fixup.dat.
  c) loads a cmdline.txt
  d) enables the CPU.
  e) loads the kernel image configurable via config.txt

In your target/linux/brcm2708/image/config.txt
 493 ## kernel (string)
 494 ##     Alternative name to use when loading kernel.
 495 ##
 496 #kernel=""
it is not configured!

But in your target/linux/brcm2708/image/Makefile
  75   KERNEL_IMG := kernel8.img
  76   DEVICE_TITLE := Raspberry Pi 3B/3B+
you have kernel8.img

GPU Firmware search order by default for a PI 3 is:
kernel8.img if found boot in 64 bit mode
kernel8-32.img if found boot in 32 bit mode
kernel7.img if found boot in 32 bit mode
kernel.img if found boot in 32 bit mode

But a PI 2 will start the search from kernel7.img and
a PI 1 only looks for kernel.img.

Оbviously the kernel has been found.
But something goes wrong and the device is restarted.

In your package/kernel/brcm2708-gpu-fw/Makefile
  11 PKG_NAME:=brcm2708-gpu-fw
  12 PKG_VERSION:=2017-08-08
  13 PKG_RELEASE:=e7ba7ab135f5a68b2c00a919ea9ac8d5528a5d5b
boot loader is 10 monts old.

In conclusion, the best way to solve the problem is
to update the boot loader!

Fixup_cd.dat and start_cd.elf files are not necessary.
These are used when GPU memory is set to 16 MB, which disables
some GPU features.
I did not remove them just in case!

cheers

Signed-off-by: Christo Nedev <christo.nedev@gmail.com>
(backported from c335649629e641209a3539209defffeea090ad8f)

13 months agokernel: don't auto attach ubi on read error
Mathias Kresin [Sun, 8 Jul 2018 21:18:15 +0000 (23:18 +0200)]
kernel: don't auto attach ubi on read error

With a10a204aab26cc ("kernel: make ubi auto-attach check for a tar file
magic") the check for the magic was added without considering a failing
mtd_read(). If the read fails, no check is done and the mount code is
called straight away.

Failing with an error message for such cases seems to me the cleaner way,
as it would allow to spot hidden/workaround issues.

Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from 3716b5e4e6374883c80e61021923733b14cdb011)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
13 months agokernel: handle bad blocks in ubi auto attach code
Mathias Kresin [Sat, 7 Jul 2018 23:47:28 +0000 (01:47 +0200)]
kernel: handle bad blocks in ubi auto attach code

The first block(s) of the ubi mtd device might be bad. We need to take
care on our own to skip the bad block(s) and read the next one(s).

Don't treat recoverable read errors as fatal and check for the UBI magic
if the data of a block could be recovered using ECC or similar.

Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from 0ac91d82ed4d077150db902eb12d383c2be44fb2)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
13 months agokernel: improve ubi auto attach code readability
Mathias Kresin [Sat, 7 Jul 2018 23:38:08 +0000 (01:38 +0200)]
kernel: improve ubi auto attach code readability

Move the put_mtd_device() called on multiple error conditions to a goto
label to use it later for more error conditions.

The early return on failed open of the mtd device and mismatching mtd
type allows to get rid of one level of indentation. By jumping to the
cleanup code, a refcount bug is fixed for the wrong flash type condition.

While at it, make clear that we only check for the UBI magic if the read
from flash was successful.

Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from fdf6760cda15b2710287c66c9969a3ed527793d8)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
13 months agobuild: do not override CCACHE_DIR when ccache is disabled
Jo-Philipp Wich [Tue, 24 Jul 2018 13:23:05 +0000 (15:23 +0200)]
build: do not override CCACHE_DIR when ccache is disabled

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(backported from 991c7a4f69976f72bcee3f76d6917b224da45ea1)

13 months agobuild: prereq-build.mk: fix gcc/g++ SetupHostCommand invocation
Jo-Philipp Wich [Tue, 24 Jul 2018 11:36:28 +0000 (13:36 +0200)]
build: prereq-build.mk: fix gcc/g++ SetupHostCommand invocation

A missing comma caused the first command option to be considered part of
the error message.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(backported from a6f4c7bce8c62d2dded5c8c12f7f118e2a6c9ee5)

13 months agohostapd: remove unused struct hostapd_ubus_iface
Felix Fietkau [Thu, 19 Jul 2018 15:13:25 +0000 (17:13 +0200)]
hostapd: remove unused struct hostapd_ubus_iface

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from f0ac9afe695ed297caf093f02144b2adf04bca87)

13 months agobase-files: fix wrong sysctl parameter order
Luiz Angelo Daros de Luca [Tue, 17 Jul 2018 22:41:09 +0000 (19:41 -0300)]
base-files: fix wrong sysctl parameter order

Restarting service sysctl echos multiple errors like:

  sysctl: -e: No such file or directory

After the first filename, all remaining arguments are treated
as files.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
(backported from 4c4288728611d334efb777b74e737e1f98e0dc1b)

13 months agohostapd: fix conflicts hell
Mathias Kresin [Wed, 11 Jul 2018 20:13:36 +0000 (22:13 +0200)]
hostapd: fix conflicts hell

Add each variant to the matching PROVIDERS variables after evaluating
the respective hostapd*, wpad* and wpa* variant.

Each package providing the same feature will automatically conflict with
all prior packages providing the same feature.

This way we can handle the conflicts automatically without introducing
recursive dependencies.

Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from 3838b16943c6021e3ff06d5733df890408ad7158)

13 months agohostapd: cleanup package definition
Mathias Kresin [Tue, 10 Jul 2018 19:17:33 +0000 (21:17 +0200)]
hostapd: cleanup package definition

Move common variables and/or values to the package (variant) default.
Add additional values in variant packages if necessary. Remove further
duplicates by introducing new templates.

Remove the ANY_[HOSTAPD|SUPPLICANT_PROVIDERS]_PROVIDERS. The are the
same as the variables without the any prefix. No need to maintain both
variables.

Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from 8af8ceb1c8558a6f25c50cb68b87a3a3425f3417)

13 months agoopenvpn: increase procd termination timeout to 15s
Jo-Philipp Wich [Tue, 17 Jul 2018 14:01:46 +0000 (16:01 +0200)]
openvpn: increase procd termination timeout to 15s

Increase the termination timeout to 15s to let OpenVPN properly tear down
its connections, especially when weak links or complex down scripts are
involved.

Fixes FS#859.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(backported from 28d3a1b54b6726a0a93477d75d09a25f74ee361f)

13 months agolibrpc: add host build to install h files needed for nfs-kernel-server to get compiled
Peter Wagner [Tue, 3 Jul 2018 06:54:41 +0000 (08:54 +0200)]
librpc: add host build to install h files needed for nfs-kernel-server to get compiled

Signed-off-by: Peter Wagner <tripolar@gmx.at>
(backported from d8d2133c35c9c9b410e16cdebe878acd0da6382f)

13 months agoverbose.mk: quote SUBMAKE options
李国 [Fri, 6 Jul 2018 10:03:40 +0000 (18:03 +0800)]
verbose.mk: quote SUBMAKE options

build openwrt on centos 6 I should use devtoolset-3 to get gcc 4.9, but
it fail when make menuconfig. so I have to give option HOSTCC='gcc
-Wl,--copy-dt-needed-entries' to make. But it passed to sub make to
HOSTCC=gcc as micro SUBMAKE expand to HOSTCC=gcc
-Wl,--copy-dt-needed-entries. This patch fix this issue.

make -C build menuconfig HOSTCC='gcc -Wl,--copy-dt-needed-entries' V='1'
make: Entering directory `/work/openwrt/openwrt/build'
/opt/rh/devtoolset-3/root/usr/libexec/gcc/x86_64-redhat-linux/4.9.2/ld:
lxdialog/checklist.o: undefined reference to symbol 'acs_map'
//lib64/libtinfo.so.5: error adding symbols: DSO missing from command line
collect2: error: ld returned 1 exit status
make[1]: *** [mconf] Error 1
make -s -C scripts/config all CC=gcc -Wl,--copy-dt-needed-entries: build
failed. Please re-run make with -j1 V=s to see what's going on
make: *** [scripts/config/mconf] Error 1
make: Leaving directory `/work/openwrt/openwrt/build'

Signed-off-by: 李国 <uxgood.org@gmail.com>
(backported from 671999157d6cd0b629304f86beec7d71fc998b09)

13 months agokernel: replace bridge port isolate hack with upstream patch backport on 4.14
Felix Fietkau [Wed, 4 Jul 2018 18:14:08 +0000 (20:14 +0200)]
kernel: replace bridge port isolate hack with upstream patch backport on 4.14

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from 21ee8ce9b52f8ae4a6babf4032f71e2d4d56392b)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
13 months agokernel: adjust bridge port isolate patch to match upstream attribute naming
Felix Fietkau [Wed, 4 Jul 2018 17:49:32 +0000 (19:49 +0200)]
kernel: adjust bridge port isolate patch to match upstream attribute naming

Newer kernels have a patch that implements compatible functionality
directly. Adjust the attribute of our own patch in preparation for
dropping it later

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from 41a1c1af4bbf18cb5f3a4dfd1fb988317da9aa2d)

13 months agotools/ccache: update to 3.4.2
Hannu Nyman [Fri, 6 Jul 2018 13:45:06 +0000 (16:45 +0300)]
tools/ccache: update to 3.4.2

update version and refresh patch

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(backported from 7ec931b7f01e8e9dc6463069237097950761996a)

13 months agotools/cmake: update to 3.11.4
Hannu Nyman [Fri, 6 Jul 2018 13:46:33 +0000 (16:46 +0300)]
tools/cmake: update to 3.11.4

Update cmake and refresh patches.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
(backported from 55fa8068c4eb1f6213ca115655067e635da3e637)

13 months agofixup-makefile.pl: fixup when PKG_SOURCE is defined elsewhere
Yousong Zhou [Tue, 3 Jul 2018 07:37:49 +0000 (15:37 +0800)]
fixup-makefile.pl: fixup when PKG_SOURCE is defined elsewhere

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(backported from eb6759cc786b9a5fe1425364fc54212a425ff0be)

13 months agobuild: ASLR hardening use $(FPIC)
Kevin Darbyshire-Bryant [Sat, 9 Jun 2018 08:11:24 +0000 (09:11 +0100)]
build: ASLR hardening use $(FPIC)

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(backported from 89b59994eb44b5cd2fac594144c20c63fd05ef25)

13 months agotoolchain: gdb: enable TUI
Kevin Darbyshire-Bryant [Mon, 4 Sep 2017 19:20:12 +0000 (20:20 +0100)]
toolchain: gdb: enable TUI

The GDB Text User Interface (TUI) is a terminal interface
which uses the curses library to show the source file,
the assembly output, the program registers and GDB
commands in separate text windows.

In other words it's a friendlier interface for idiots like me!

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(backported from 900d86766b2a2122ea435d98aa50dc72d5dadf93)

13 months agoebtables: update to latest git 2018-06-27
Hans Dedecker [Mon, 2 Jul 2018 15:31:03 +0000 (17:31 +0200)]
ebtables: update to latest git 2018-06-27

48cff25 build: drop install -o/-g root
53d7e7a extensions: ebt_string: take action if snprintf discards data

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from afac2a2dd67502ef8bd9799f328fa2e3b39292b1)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
13 months agoramips: fix wizfi630a swapped lan/wan port
Lev [Tue, 26 Jun 2018 22:50:11 +0000 (00:50 +0200)]
ramips: fix wizfi630a swapped lan/wan port

The order of the Ethernet ports were mixed up.
This commit fixes the order to be aligned with the physical layout.

Signed-off-by: Lev <leventelist@gmail.com>
(backported from 3d6f57f3c6dabfe3911ffb1f1a2afbe3ff41c3fd)

13 months agousbutils: Switch to Fedora usbutils
Rosen Penev [Sat, 30 Jun 2018 19:25:12 +0000 (12:25 -0700)]
usbutils: Switch to Fedora usbutils

The Gentoo GitHub mirror went down. One benefit of Fedora's usb.ids file
is that it's versioned.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(backported from f23271f3b4f54d1e5ddf7b85786f9a30f38409ad)

13 months agosamba36: Disable external libtdb and libtevent
Rosen Penev [Sun, 1 Jul 2018 00:02:52 +0000 (17:02 -0700)]
samba36: Disable external libtdb and libtevent

This was causing issues recently as samba36 is not API compatible with the
libtdb in the packages repo. It shouldn't be using it anyway. Nor tevent.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(backported from 1f2612a4ddbb83af0c6daf3719ab74c3b7db6590)

13 months agoswconfig: swlib_map_settings(): change return type to void
Alexander Couzens [Fri, 29 Jun 2018 03:36:06 +0000 (05:36 +0200)]
swconfig: swlib_map_settings(): change return type to void

The return value of the function isn't used anywhere.
Fixes missing return value, CID 1329717.

Found-by: Coverity
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
(backported from b06c447c5f66fd13078327bda3d885d48e2c0e42)

13 months agoswconfig: fix un-initialized return value
Alexander Couzens [Fri, 29 Jun 2018 03:27:16 +0000 (05:27 +0200)]
swconfig: fix un-initialized return value

Fix CID 1330844

Found-by: Coverity
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
(backported from e37ad4e5ca2e70387656da81704ee4d4589c6d70)

13 months agobuild: include package directory in sha256sums when running on buildbot
Jo-Philipp Wich [Wed, 27 Jun 2018 16:51:25 +0000 (18:51 +0200)]
build: include package directory in sha256sums when running on buildbot

In order to be able to better compare files to sync in the future, include
all BIN_DIR subdirectories in the checksum calculation.

To not break existing applications, restrict the recursive checksumming to
CONFIG_BUILDBOT for now.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
(backported from 681e825f8fbf59a32c3b09810b2a3fef29880c63)

13 months agobase-files: add menuconfig option for HOME_URL
Mathias Kresin [Thu, 2 Nov 2017 07:21:57 +0000 (08:21 +0100)]
base-files: add menuconfig option for HOME_URL

Add a menuconfig option to set the HOME_URL exposed in
/usr/lib/os-release independent from the
LEDE_DEVICE_MANUFACTURER_URL.

Fixes: FS#1123

Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from 52a9edb1bfaf51c250a33303beacba95dd1dbc05)

13 months agonetfilter: add bpf match support
Alin Nastac [Mon, 25 Jun 2018 08:22:21 +0000 (10:22 +0200)]
netfilter: add bpf match support

Add xt_bpf modules to {kmod-ipt,iptables-mod}-filter.

Match using Linux Socket Filter. Expects a BPF program in decimal
format. This is the format generated by the nfbpf_compile utility.

Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
(backported from ab07ae2f27dd920cb7ba186d9f7ad2ccb1c980c4)

13 months agodropbear: let opkg manage symlinks of ssh, scp
Yousong Zhou [Mon, 25 Jun 2018 05:16:09 +0000 (13:16 +0800)]
dropbear: let opkg manage symlinks of ssh, scp

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(backported from c4aadbdaf69bad3fbb3ef54601a3629ba24a6e9b)

13 months agobusybox: udhcpc: replace udhcpc_no_msg_dontroute patch by upstream fix
Hans Dedecker [Thu, 21 Jun 2018 20:26:18 +0000 (22:26 +0200)]
busybox: udhcpc: replace udhcpc_no_msg_dontroute patch by upstream fix

Replace 204-udhcpc_no_msg_dontroute patch by the upstream busybox fix
which removes the code which requires the server ID to be on local
network

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from c6e50075f245b076b57f3f87b5401764a2e11b92)

13 months agobusybox: update to 1.28.4
Magnus Kroken [Sun, 17 Jun 2018 14:16:39 +0000 (16:16 +0200)]
busybox: update to 1.28.4

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
(backported from ccc728a0e2a7c9717d3d1bcc59f0462e9dbed01e)

13 months agonftables: bump to version 0.9.0
Rosy Song [Tue, 12 Jun 2018 07:49:50 +0000 (15:49 +0800)]
nftables: bump to version 0.9.0

Signed-off-by: Rosy Song <rosysong@rosinson.com>
(backported from 1ee98fdef3d6d71c1b0b3b120a9e24ac4b93c94f)

13 months agolibnftnl: bump to version 1.1.1
Rosy Song [Tue, 12 Jun 2018 07:49:32 +0000 (15:49 +0800)]
libnftnl: bump to version 1.1.1

Signed-off-by: Rosy Song <rosysong@rosinson.com>
(backported from 9d6a0352e7af9aef95f4d983e39516b76e7fc8ba)

13 months agobase-files: exit if mtd write command fails during sysupgrade
Rafał Miłecki [Mon, 11 Jun 2018 10:52:42 +0000 (12:52 +0200)]
base-files: exit if mtd write command fails during sysupgrade

It avoids confusing situations like:
> Could not get image magic
> Image check failed.
> Upgrade completed
> Rebooting system...

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(backported from 5b2e20807d2b38de1cc4185d15bb4320b8bd743a)

13 months agoramips: mt7621: fix mtu setting with kernel 4.14
Mathias Kresin [Sun, 18 Feb 2018 21:48:44 +0000 (22:48 +0100)]
ramips: mt7621: fix mtu setting with kernel 4.14

Since kernel 4.10 commit 61e84623ace3 ("net: centralize net_device
min/max MTU checking"), the range of mtu is [min_mtu, max_mtu], which
is [68, 1500] by default.

It's necessary to set a max_mtu if a mtu > 1500 is supported.

Signed-off-by: Mathias Kresin <dev@kresin.me>
(backported from 5da2c68d001ee44b15a58639ed03a0ebb6f68020)

13 months agokernel: avoid flow offload for connections with xfrm on the dst entry (should fix...
Felix Fietkau [Sun, 8 Apr 2018 17:19:58 +0000 (19:19 +0200)]
kernel: avoid flow offload for connections with xfrm on the dst entry (should fix IPSec)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
(backported from b560c1748a4edf0d02046e5a988cc0caf1f4f987)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
13 months agohostapd: make cli treat UNKNOWN COMMAND as failing
Denton Gentry [Wed, 30 May 2018 15:05:42 +0000 (15:05 +0000)]
hostapd: make cli treat UNKNOWN COMMAND as failing

Avoid infinite loop at 100% CPU when running hostapd_cli
if CONFIG_CTRL_IFACE_MIB is not defined.

  _newselect(4, [3], NULL, NULL, ...)
  recvfrom(3, "UNKNOWN COMMAND\n", 4095, 0, NULL, NULL) = 16
  sendto(3, "STA-NEXT UNKNOWN COMMAND", 24, 0, NULL, 0) = 24

Signed-off-by: Denton Gentry <denny@geekhold.com>
(backported from a84962ea35e4e97f1c4a42f2eac0242cc2cbd879)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
13 months agoramips: fix reboot with W25Q256 with 4-address-mode enabled
Daniel Golle [Wed, 6 Jun 2018 23:51:58 +0000 (01:51 +0200)]
ramips: fix reboot with W25Q256 with 4-address-mode enabled

Some board vendors actually changed the loader to expect the chip
to come up in 4-address-mode and flipped the ADP bit in the flash
chip's configuration register which makes it come up in 4-address-mode.
Hence it doesn't make sense to avoid switching to 4-address-mode on
those boards but the opposite as otherwise reboot hangs eg. on the
WrtNode2 boards. Fix this by checking the ADP register and only using
SPI_NOR_4B_READ_OP on chips which have ADP==0 (come up in 3-byte mode).

See also datasheet section 7.1.11 Power Up Address Mode (ADP)

Fixes: 22d982ea0 ("ramips: add support for switching between 3-byte and 4-byte addressing on w25q256 flash")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(backported from 8796680277f4b231386fbc6e8a1ccae91d9fcbe8)

13 months agoebtables: update to latest git 2018-06-06
Hans Dedecker [Wed, 6 Jun 2018 20:30:57 +0000 (22:30 +0200)]
ebtables: update to latest git 2018-06-06

5699354 extensions: fix build failure on fc28
e6359ee build: update ebtables.h from kernel and drop local unused copy

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
(backported from 1bbe813db0bb8dc65b8ed7740cf7f35a81b8ba0e)

13 months agoscripts: Replace obsolete POSIX tmpnam in slugimage.pl with File::Temp function
Ted Hess [Tue, 5 Jun 2018 14:05:35 +0000 (10:05 -0400)]
scripts: Replace obsolete POSIX tmpnam in slugimage.pl with File::Temp function

Signed-off-by: Ted Hess <thess@kitschensync.net>
(backported from 7590c3c58f5e9d580c86da10473d1d29a2f081c9)

13 months agonetifd: drop conflicting 'device' interface property
Ivan Shapovalov [Sun, 13 May 2018 21:05:43 +0000 (00:05 +0300)]
netifd: drop conflicting 'device' interface property

Do not set device runtime property on interfaces in the hotplug handler
and in fixup_interfaces(). This property conflicts with device option
in several proto handlers (mainly QMI and other WWAN/3G protos) and does
not seem to be used anywhere.

Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
(backported from 91b5b2e20d531584918c62a6c6cd046f0580f50a)

13 months agonettle: bump to 3.4
Kevin Darbyshire-Bryant [Wed, 30 May 2018 08:46:34 +0000 (08:46 +0000)]
nettle: bump to 3.4

3.4 is mainly a bug fix/maintenance release.

3KB increase in ipk lib size on mips.

Compile tested for: ar71xx, ramips
Run tested on: ar71xx Archer C7 v2, ramips mir3g

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(backported from 1ee5051f202f600d854bcf939ba4ee37f057ace2)

13 months agoca-certificates: ca-bundle: add symlink for openssl default setting
Yousong Zhou [Thu, 5 Jul 2018 10:51:54 +0000 (18:51 +0800)]
ca-certificates: ca-bundle: add symlink for openssl default setting

OpenSSL defaults X509_CERT_FILE to /etc/ssl/cert.pem.  This change is
needed for wget-ssl and possibly others to work seamlessly with fresh
ca-bundle installation

Fixes openwrt/packages#6152

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
(backported from 191078e83d127f5ed9a38366d2edaac49f9333c5)

13 months agocurl: Add ca-bundle dependency
Rosen Penev [Sun, 27 May 2018 22:13:48 +0000 (15:13 -0700)]
curl: Add ca-bundle dependency

While building, curl complains that the path specified is missing.
Also, without ca-bundle, something like 'curl https://www.google.com'
does not work due to a certificate verify error.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(backported from 7a20c7a05d52f9bb3c82742098457bfbed869a8a)

13 months agocurl: Use ca-bundle for all TLS libraries.
Rosen Penev [Sun, 27 May 2018 22:13:47 +0000 (15:13 -0700)]
curl: Use ca-bundle for all TLS libraries.

It simplifies the Makefile a bit. In addition, using ca-bundle
saves some space as well.

It also fixes an issue with at least transmission, which has a dependency
on ca-bundle, but currently libcurl with OpenSSL or GnuTLS cause it not
to work.

This has been tested on mt7621 with OpenSSL and GnuTLS just by running
'curl https://www.google.com' and seeing if there's a verify error.
The rest are already using ca-bundle and therefore work fine.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
(backported from f97946c49680a5fe713d0e2caaf072789f70e68d)

13 months agoath10k-firmware: Fix QCA6174 support
Rosen Penev [Fri, 25 May 2018 03:47:46 +0000 (20:47 -0700)]
ath10k-firmware: Fix QCA6174 support

Currently when installing the firmware, a bunch of files and directories
that the ath10k driver does not look for are created.

The package now installs firmware for both hw 2.1 and 3.0 devices.
2.1 is abandonware but may be useful to keep.

3.0 firmware was tested on a Killer 1535 to be relatively stable with
802.11w disabled. 802.11w causes multiple firmware crashes but that's true
of other ath10k firmwares as well.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
(backported and squashed from
 27eab4fa578d696ab55b6264a1b35fad6488b664,
 d0fbe1956b3b9f07b6dcb54a8ed43a4904581e1d,
 e191c7ee797c8b3458eb9791212a56b16febeeb4)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
13 months agohostapd: properly build hostapd-only SSL variants
Daniel Golle [Thu, 31 May 2018 13:18:12 +0000 (15:18 +0200)]
hostapd: properly build hostapd-only SSL variants

Make sure hostapd-openssl is actually build against OpenSSL, same
for wolfSSL.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(backported from 987900f2de76e6d292e55aa068c39b03f79c8812)

13 months agohostapd: update packaging and patches
Daniel Golle [Wed, 30 May 2018 22:10:49 +0000 (00:10 +0200)]
hostapd: update packaging and patches

Clean up conflicts/provides/depends hell and add PROVIDES for
eapol-test variants while at it.
Update mesh-DFS patchset from Peter Oh to v5 (with local fixes) which
allows to drop two revert-patches for upstream commits which previously
were necessary to un-break mesh-DFS support.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(backported from 78f1974bc565d7544589a49ad8efd92c4ddec5b3)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
13 months agohostapd: convert ssl provider build options to variants
Daniel Golle [Fri, 25 May 2018 13:59:41 +0000 (15:59 +0200)]
hostapd: convert ssl provider build options to variants

Instead of selecting the SSL provider at compile time, build package
variants for each option so users can select the binary package without
having to build it themselves.
Most likely not all variants have actually ever been user by anyone.
We should reduce the selection to the reasonable and most used
combinations at some point in future. For now, build them all.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(backported from c8fdd0e9c843dd483f6677dc41f7df17313aa3cd)

13 months agohostapd: update to git HEAD of 2018-05-21, allow build against wolfssl
Daniel Golle [Sat, 28 Apr 2018 19:12:19 +0000 (21:12 +0200)]
hostapd: update to git HEAD of 2018-05-21, allow build against wolfssl

Support for building wpa_supplicant/hostapd against wolfssl has been
added upstream recently, add build option to allow users using it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(backported from 69f544937f8498e856690f9809a016f0d7f5f68b)
(rebased patches)
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
13 months agoustream-ssl: fix build against wolfSSL
Daniel Golle [Thu, 24 May 2018 16:51:44 +0000 (18:51 +0200)]
ustream-ssl: fix build against wolfSSL

commit 39a6ce205d (ustream-ssl: Enable ECDHE with OpenSSL.) broke
build against wolfSSL because wolfSSL doesn't (yet) support
SSL_CTX_set_ecdh_auto() of the OpenSSL API.

Fix this in ustream-ssl:

 189cd38b41 don't use SSL_CTX_set_ecdh_auto with wolfSSL

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(backported from 4f442f5f383837efcfb345033169178f74f63440)

13 months agowolfssl: change defaults to cover wpa_supplicant needs
Daniel Golle [Wed, 30 May 2018 22:34:15 +0000 (00:34 +0200)]
wolfssl: change defaults to cover wpa_supplicant needs

Implicetely selecting the required options via Kconfig snippet from
hostapd worked fine in local builds when using menuconfig but confused
the buildbots which (in phase1) may build wpad-mini and hence already
come with CONFIG_WPA_WOLFSSL being defined as unset which then won't
trigger changing the defaults of wolfssl.

Work around by explicitely reflecting wpa_supplicant's needs in
wolfssl's default settings to make buildbots happy.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(backported from dad39249fb91d6f320256ac12944863f09bb2dc9)

13 months agowolfssl: add PKG_CONFIG_DEPENDS symbols
Daniel Golle [Fri, 25 May 2018 18:35:46 +0000 (20:35 +0200)]
wolfssl: add PKG_CONFIG_DEPENDS symbols

This change will trigger rebuild on buildbots in case of changed config
symbols, like in the case of hostapd selecting some wolfssl symbols
lately.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(backported from 5857088c5eb3a5a2409e3c57dbfa2487e08bbf4a)

13 months agowolfssl: update to version 3.14.4
Daniel Golle [Wed, 23 May 2018 21:26:41 +0000 (23:26 +0200)]
wolfssl: update to version 3.14.4

Use download from github archive corresponding to v3.14.4 tag because
the project's website apparently only offers 3.14.0-stable release
downloads.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(backported from 4f67c1522d92bc4512c3ecf58c38ff9886530b48)

13 months agopackage sysfsutils: add support for sysfs settings at boot
Rodolfo Giometti [Wed, 28 Jun 2017 08:49:01 +0000 (10:49 +0200)]
package sysfsutils: add support for sysfs settings at boot

This patch is based on sysfsutils package's behaviour on Debian OS.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
(backported from 2437e0f67050cad79cc1778b18cefd8d3cd86d07)