23 months agoiptables: make kmod-ipt-debug part of default ALL build
Yousong Zhou [Fri, 26 Jan 2018 06:40:25 +0000 (14:40 +0800)]
iptables: make kmod-ipt-debug part of default ALL build

The iptables TRACE target is only available in raw table that's why the
dependency was moved from iptables-mod-trace into kmod-ipt-debug

Fixes FS#1219

Signed-off-by: Yousong Zhou <>
23 months agoiptables: Fix target TRACE issue
Martin Wetterwald [Thu, 12 Jan 2017 14:06:00 +0000 (15:06 +0100)]
iptables: Fix target TRACE issue

The package kmod-ipt-debug builds the module xt_TRACE, which allows
users to use '-j TRACE' as target in the chain PREROUTING of the table
raw in iptables.

The kernel compilation flag NETFILTER_XT_TARGET_TRACE is also enabled so
that this feature which is implemented deep inside the linux IP stack
(for example in sk_buff) is compiled.

But a strace of iptables -t raw -I PREROUTING -p icmp -j TRACE reveals
that an attempt is made to read /usr/lib/iptables/, which
fails as this dynamic library is not present on the system.

I created the package iptables-mod-trace which takes care of that, and
target TRACE now works!

Signed-off-by: Martin Wetterwald <>
[Jo-Philipp Wich: also remove trace extension from builtin extension list
                  and depend on kmod-ipt-raw since its required for rules]
Signed-off-by: Jo-Philipp Wich <>
Tested-by: Enrico Mioso <>
2 years agocurl: fix libcurl/mbedtls async interface
Darren Tucker [Sat, 20 Jan 2018 06:26:06 +0000 (14:26 +0800)]
curl: fix libcurl/mbedtls async interface

When using mbedtls, curl's nonblocking interface will report a request
as done immediately after the socket is written to and never read from
the connection.  This will result in a HTTP status code of 0 and zero
length replies.  Cherry-pick the patch from curl 7.53.0 to fix this


Signed-off-by: Darren Tucker <>
2 years agokernel: bump 4.4 to 4.4.112 for 17.01
Kevin Darbyshire-Bryant [Thu, 18 Jan 2018 13:46:13 +0000 (13:46 +0000)]
kernel: bump 4.4 to 4.4.112 for 17.01

Refresh patches.
Remove upstreamed patches:


CVEs completely or partially addressed:


Compile-tested: ar71xx Archer C7 v2
Run-tested: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <>
2 years agodnsmasq: backport validation fix in dnssec security fix
Kevin Darbyshire-Bryant [Sat, 20 Jan 2018 08:46:28 +0000 (08:46 +0000)]
dnsmasq: backport validation fix in dnssec security fix

A DNSSEC validation error was introduced in the fix for CVE-2017-15107

Backport the upstream fix to the fix (a simple typo)

Signed-off-by: Kevin Darbyshire-Bryant <>
(backported from commit adaf1cbcc8b253ea807dbe0416b4b04c33dceadf)

2 years agodnsmasq: backport dnssec security fix for 17.01
Kevin Darbyshire-Bryant [Fri, 19 Jan 2018 17:15:41 +0000 (17:15 +0000)]
dnsmasq: backport dnssec security fix for 17.01


An interesting problem has turned up in DNSSEC validation. It turns out
that NSEC records expanded from wildcards are allowed, so a domain can
include an NSEC record for * and an actual query reply could
expand that to anything in  and still have it signed by the
signature for the wildcard. So, for example


is fine.

The problem is that most implementers (your author included, but also
the Google public DNS people, powerdns and Unbound) then took that
record to prove the nothing exists between ! and, whereas in fact it only provides that proof between
* and

This gives an attacker a way to prove that anything between
! and * doesn't exists, when it may well do so.

Signed-off-by: Kevin Darbyshire-Bryant <>
2 years agomountd: bump to git HEAD version
Hans Dedecker [Wed, 17 Jan 2018 12:57:30 +0000 (13:57 +0100)]
mountd: bump to git HEAD version

c54e5c6 mount: check if block was mounted before cleaning it up
e31565a mount: remove directory if mounting fails
0f4f20b mount: call hotplug mount scripts only on success

Signed-off-by: Hans Dedecker <>
2 years agokernel: bump 4.4 to 4.4.111 for 17.01
Kevin Darbyshire-Bryant [Wed, 10 Jan 2018 16:01:00 +0000 (16:01 +0000)]
kernel: bump 4.4 to 4.4.111 for 17.01

Refresh patches

Tested-on: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <>
2 years agokmod-sched-cake: bump to latest cake bake for 17.01
Kevin Darbyshire-Bryant [Mon, 8 Jan 2018 13:00:07 +0000 (13:00 +0000)]
kmod-sched-cake: bump to latest cake bake for 17.01

More important bug fix:

402f05c Use full-rate mtu_time in all tins.  Fixes an issue where some
cake tins experienced excessive latency since 49776da (dynamically
adjust target)

Minor bug fixes:

31277c2 Avoid unsigned comparison against zero.  Fix compiler warning,
no known impact.
8cf5278 ack_filter: fix TCP flag check. A very contrived case may have
lead to dropping a SYN packet that should not be dropped.

Signed-off-by: Kevin Darbyshire-Bryant <>
2 years agoar71xx: Netgear WNR2000v4: do not include USB packages [17.01]
Stijn Segers [Sat, 13 Jan 2018 16:18:21 +0000 (17:18 +0100)]
ar71xx: Netgear WNR2000v4: do not include USB packages [17.01]

The Netgear WNR2000v4 does not have a USB port. Hence, including USB packages into the default images is useless.
It looks like the WNR2000v4 definition in master is OK.

v2 fixes the silly typo in the patch title (WNR2000v4 instead of WNR200v4)

Signed-off-by: Stijn Segers <>
2 years agobuild: fix restoring /etc/opkg with PER_DEVICE_ROOTFS
Jo-Philipp Wich [Wed, 10 Jan 2018 19:17:48 +0000 (20:17 +0100)]
build: fix restoring /etc/opkg with PER_DEVICE_ROOTFS

When generating per-device rootfs directories, the ./etc/opkg/ directory
is moved away prior to calling opkg install, opkg remove and rootfs_prepare.
After the opkg invocations and the rootfs_prepare macro call, the saved opkg
config directory is supposed to be moved back to its previous ./etc/opkg

The mv command however can fail to properly restore the directory under
certain circumstances, e.g. when the prior opkg or files/ overlay copy
operations caused a new ./etc/opkg/ directory to be created.

In this case, the backed up directory (named target-dir-$hash.opkg) will be
moved into the preexisting ./etc/opkg/ directory instead, causing the opkg
configuration to be located in a wrong path on the final rootfs, e.g. in
/etc/opkg/target-dir-$hash.opkg/distfeeds.conf instead of

Solve this problem by replacing the naive "mv" command with a recursive
"cp -T" invocation which causes the backed up directory tree to get merged
with the destination directory in case it already exists.

Also perform the rootfs_prepare macro call after restoring the opkg
configuration, to allow users to override it again by using the files/
overlay mechanism.

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit ab1785b1b2559c9f2d09d4d3ce43e11f4b828616)

2 years agoramips: fix lenovo newifi-y1 switch and LED config
Chuanhong Guo [Fri, 29 Dec 2017 04:35:32 +0000 (12:35 +0800)]
ramips: fix lenovo newifi-y1 switch and LED config

There are 3 ethernet ports on Y1. LAN1 on port1, LAN2 on port0 and WAN on

Use a standalone switch configuration to match this and use the switch
trigger so that LAN LED could indicate the connetction status for both
lan ports correctly.

This patch also drop the internet led configuration, because there is a
WAN led for port4 and eth0.2 isn't always used as WAN.

Signed-off-by: Chuanhong Guo <>
2 years agoramips: firewrt: indicate boot status via LED
Mathias Kresin [Sat, 30 Dec 2017 09:19:18 +0000 (10:19 +0100)]
ramips: firewrt: indicate boot status via LED

Add the Firefly FireWRT gree power LED to to indicate the boot
status via the power LED.

Signed-off-by: Mathias Kresin <>
2 years agoag71xx: Fix rx ring buffer stall on small packets flood on qca956x and qca953x.
Vittorio Gambaletta [Sat, 25 Mar 2017 17:08:02 +0000 (18:08 +0100)]
ag71xx: Fix rx ring buffer stall on small packets flood on qca956x and qca953x.

Backported from Code Aurora QSDK

Signed-off-by: Vittorio Gambaletta <>
2 years agoar71xx: QCA956X: add missing register
Henryk Heisig [Fri, 6 Jan 2017 20:21:11 +0000 (21:21 +0100)]
ar71xx: QCA956X: add missing register

Signed-off-by: Henryk Heisig <>
2 years agomvebu: fix mvneta build with Linux 4.4.110
Jo-Philipp Wich [Mon, 8 Jan 2018 13:35:21 +0000 (14:35 +0100)]
mvebu: fix mvneta build with Linux 4.4.110

Kernel 4.4.109 added pp->link, pp->duplex and pp->speed setters to
mvneta_port_disable() which the mvneta patchset failed to patch out after
rebasing, leading to the following build error:

      CC      drivers/net/ethernet/marvell/mvneta.o
    drivers/net/ethernet/marvell/mvneta.c: In function 'mvneta_port_disable':
    drivers/net/ethernet/marvell/mvneta.c:1199:4: error: 'struct mvneta_port' has no member named 'link'
      pp->link = 0;
    drivers/net/ethernet/marvell/mvneta.c:1200:4: error: 'struct mvneta_port' has no member named 'duplex'
      pp->duplex = -1;
    drivers/net/ethernet/marvell/mvneta.c:1201:4: error: 'struct mvneta_port' has no member named 'speed'
      pp->speed = 0;

Fix the issue by rebasing 134-net-mvneta-convert-to-phylink.patch to remove
these struct member accesses as well.

Fixes: 7f5a040359 ("kernel: update kernel 4.4 to version 4.4.110")
Signed-off-by: Jo-Philipp Wich <>
2 years agolantiq: activate noise margin delta for VDSL too
Hauke Mehrtens [Sat, 6 Jan 2018 01:36:39 +0000 (02:36 +0100)]
lantiq: activate noise margin delta for VDSL too

Previously this was only activated for ADSL, this patch activates the
same setting also for VDSL, this feature is also support for VDSL in the
same way it works for ADSL.
I tested it with DSL FW against a Broadcom 177.140 DSLCO
(Deutsche Telekom) and saw different data rates and Max. Attainable Data
Rates depending on the ds_snr_offset settings I choose.

Signed-off-by: Hauke Mehrtens <>
2 years agoLantiq: make possible to tweak DSL SRN from UCI
Andrea Merello [Sat, 13 May 2017 15:16:13 +0000 (17:16 +0200)]
Lantiq: make possible to tweak DSL SRN from UCI

This patch makes possible to tweak the downstream SNR margin on
Lantiq DSL devices.

The UCI parameter 'network.dsl.ds_snr_offset' is used to set the SNR
margin offset. It accepts values in range -50 to +50 in 0.1 dB units.

The SNR margin can thus be modified in range -5.0 to +5.0 dB in 0.1 dB

Currently this should only affect ADSL (not VDSL). It should be very
easy to make this work also on VDSL lines, but since I couldn't test
on VDSL lines this patch does not do that yet.

I have also a patch for LUCI about this, that I could submit.

Tested on FB3370 (Lantiq VR9) and Telecom Italia ADSL2+ line.

Signed-off-by: Andrea Merello <>
2 years agolibubox: update to latest lede-17.01 git HEAD
Jo-Philipp Wich [Sun, 7 Jan 2018 15:22:21 +0000 (16:22 +0100)]
libubox: update to latest lede-17.01 git HEAD

1dafcd7 jshn: properly support JSON "null" type
6abafba jshn: read and write 64-bit integers
cfc75c5 runqueue: fix use-after-free bug

Signed-off-by: Jo-Philipp Wich <>
2 years agokernel: update kernel 4.4 to version 4.4.110
Hauke Mehrtens [Sat, 6 Jan 2018 01:08:42 +0000 (02:08 +0100)]
kernel: update kernel 4.4 to version 4.4.110

This fixes:  CVE-2017-5754

Signed-off-by: Hauke Mehrtens <>
2 years agobrcm47xx: relocate the stack in loader
Hauke Mehrtens [Sun, 8 Oct 2017 16:31:03 +0000 (18:31 +0200)]
brcm47xx: relocate the stack in loader

By default we are reusing the stack provided by CFE, like it is intended
by CFE. On my WRT54GS it is located at 0x8043BF30, so a big kernel image
could overwrite it. Relocate it to a different memory region which is
still under the 8MB RAM, but in the higher area. We only need this
memory region for the stack of the loader, Linux will set up this
for its own.

Signed-off-by: Hauke Mehrtens <>
2 years agobrcm47xx: relocate loader to higher address
Hauke Mehrtens [Sun, 8 Oct 2017 14:52:28 +0000 (16:52 +0200)]
brcm47xx: relocate loader to higher address

The boot process on a WRT54GL works the following way:
1. CFE gets loaded by the boot rom from flash
2. CFE loads the loader from the flash and gzip uncompresses it
3. CFE starts the loader
4. The loader stores the FW arguments and relocates itself to
   BZ_TEXT_START (now 0x80600000)
5. The loader reads the Linux image from flash
6. The loader lzma decompresses the Linux image to LOADADDR (0x80001000)
7. The loader executes the uncompress Linux image at LOADADDR

The BZ_TEXT_START was set to 0x80400000 before. When the kernel gets
uncompressed and is bigger than BZ_TEXT_START - LOADADDR it overwrote
the loader which was currently uncompressing it and made the board
crash. Increase the BZ_TEXT_START my 2 MB to have more space for the
kernel. Even on 16MB RAM devices the memory goes till 0x80FFFFFF so this
should not be a problem.

Signed-off-by: Hauke Mehrtens <>
2 years agofstools: backport fix from master branch
Rafał Miłecki [Fri, 5 Jan 2018 13:57:05 +0000 (14:57 +0100)]
fstools: backport fix from master branch

37762ff libfstools: support file paths longer than 255 chars

Signed-off-by: Rafał Miłecki <>
2 years agoprocd: update to latest git HEAD
Hans Dedecker [Thu, 4 Jan 2018 10:29:17 +0000 (11:29 +0100)]
procd: update to latest git HEAD

1883530 procd: Fix minor null pointer dereference.
9085551 procd: initd: fix path allocation in early_insmod

Signed-off-by: Hans Dedecker <>
2 years agobrcm47xx: image: build firmware for Asus WL-500g Deluxe
Rafał Miłecki [Wed, 27 Dec 2017 07:55:28 +0000 (08:55 +0100)]
brcm47xx: image: build firmware for Asus WL-500g Deluxe

It's a device based on BCM5365P (0x5365 package 0x00). This SoC has
USB 1.1 controller but device has two USB 2.0 parts. They are handled by
PCI-based controllers: 1106:3038 UHCI and 1106:3104 EHCI.

Signed-off-by: Rafał Miłecki <>
2 years agoRevert "iptables: fix nftables compile issue (FS#711)"
Hans Dedecker [Tue, 2 Jan 2018 09:04:59 +0000 (10:04 +0100)]
Revert "iptables: fix nftables compile issue (FS#711)"

This reverts commit da126d557c6d1cfe19d3f93481af6e00631d7931 as the iptables patch does not apply cleanly.

Signed-off-by: Hans Dedecker <>
2 years agoiptables: fix nftables compile issue (FS#711)
rektide de la faye [Thu, 14 Dec 2017 06:29:11 +0000 (01:29 -0500)]
iptables: fix nftables compile issue (FS#711)

Enabling IPTABLES_NFTABLES resulted in an error during build:#
*** No rule to make target '../extensions/libext.a',
needed by 'xtables-compat-multi'."

Comments from Alexander Lochmann and Fedor Konstantinov in FS#711
provided fixes for this build error, allowing iptables to compile.

This commit updates the xtables_compat_multi_LDFLAGS
and _LDADD, moving linking of extensions to LDFLAGS.

Signed-off-by: rektide de la faye <>
Signed-off-by: Hans Dedecker <>
2 years agorpcd: backport version 2017-12-07 from master
Daniel Golle [Mon, 1 Jan 2018 21:27:51 +0000 (22:27 +0100)]
rpcd: backport version 2017-12-07 from master

cfe1e75c91 sys: packagelist: allow listing all packages
74a784f037 sys: fix passwd path

Signed-off-by: Daniel Golle <>
(commit 173edcdc9da55fbd7225c4baa7b03405dfc074cc on master)

2 years agouci: update to HEAD of lede-17.01 branch
Jo-Philipp Wich [Mon, 1 Jan 2018 16:01:49 +0000 (17:01 +0100)]
uci: update to HEAD of lede-17.01 branch

Switch uci to the lede-17.01 branch which contains the following two commits
cherry-picked from uci master:

141b64e lua: additionally return name when looking up sections
1e17f24 lua: support extended section notation

Signed-off-by: Jo-Philipp Wich <>
2 years agoiproute2: cake: fix patch format error
Kevin Darbyshire-Bryant [Sat, 30 Dec 2017 09:20:39 +0000 (09:20 +0000)]
iproute2: cake: fix patch format error

Fix patch format error introduced in c4e9487cf5
Refresh patches to tidy fuzz

Signed-off-by: Kevin Darbyshire-Bryant <>
2 years agokernel: bump 4.4 to 4.4.108 for 17.01
Kevin Darbyshire-Bryant [Tue, 26 Dec 2017 19:30:02 +0000 (19:30 +0000)]
kernel: bump 4.4 to 4.4.108 for 17.01

Refresh patches.

Signed-off-by: Kevin Darbyshire-Bryant <>
2 years agoiproute2: cake: support new operating modes for 17.01
Kevin Darbyshire-Bryant [Fri, 22 Dec 2017 13:45:11 +0000 (13:45 +0000)]
iproute2: cake: support new operating modes for 17.01

There has been recent significant activity with the cake qdisc of late
Some of that effort is related to upstreaming to kernel & iproute2
mainline but we're not quite there yet.  This commit teaches tc how to
activate and interprete the latest cake operating modes, namely:

ingress mode: Instead of only counting packets that make it past the
shaper, include packets we've decided to drop as well, since they did
arrive with us on the link and took link capacity.
This mode is more suitable for shaping the ingress of a link
(e.g. from ISP) rather than the more normal egress.

ack-filter/ack-filter-aggressive: Filter excessive TCP ACKS.  Useful in
highly assymetric links (downstream v upstream capacity) where the
majority of upstream link capacity is occupied with ACKS for downstream

Signed-off-by: Kevin Darbyshire-Bryant <>
2 years agokmod-sched-cake: bump to latest bake of cake for 17.01
Kevin Darbyshire-Bryant [Fri, 22 Dec 2017 13:45:10 +0000 (13:45 +0000)]
kmod-sched-cake: bump to latest bake of cake for 17.01

There has been recent significant activity with the cake qdisc of late
but in the cobalt branch.  Some of that effort is related to upstreaming
to kernel & iproute2 mainline but we're not quite there yet.  Relevant
feature changes:

ingress mode: Instead of only counting packets that make it past the
shaper, include packets we've decided to drop as well, since they did
arrive with us on the link and took link capacity.
This mode is more suitable for shaping the ingress of a link
(e.g. from ISP) rather than the more normal egress.

ptm mode: Minor optimisation in packet overhead calculation.

dual-src/dsthost/triple-isolate: Optimise only calculating src or dst
host hashes only if required.

ack-filter/ack-filter-aggressive: Filter excessive TCP ACKS.  Useful in
highly assymetric links (downstream v upstream capacity) where the
majority of upstream link capacity is occupied with ACKS for downstream

A separate iproute2 patch to teach it about Cake's new features will

Signed-off-by: Kevin Darbyshire-Bryant <>
2 years agoramips: fix widora neo diag led
Mathias Kresin [Wed, 27 Dec 2017 21:09:52 +0000 (22:09 +0100)]
ramips: fix widora neo diag led

The diag LED is named widora:orange:wifi and can't be derived from the

Signed-off-by: Mathias Kresin <>
2 years agobase-files: fix logic when to show failsafe banner
Matthias Schiffer [Fri, 29 Dec 2017 14:56:01 +0000 (15:56 +0100)]
base-files: fix logic when to show failsafe banner

Signed-off-by: Matthias Schiffer <>
Fixes: 1c9299877be9 ("base-files: set FAILSAFE in /etc/profile when
/tmp/.failsafe exists")

2 years agobase-files: set FAILSAFE in /etc/profile when /tmp/.failsafe exists
Matthias Schiffer [Fri, 29 Dec 2017 13:34:03 +0000 (14:34 +0100)]
base-files: set FAILSAFE in /etc/profile when /tmp/.failsafe exists

Since dropbear clears the environment, FAILSAFE was not set as intended in
failsafe mode.

Signed-off-by: Matthias Schiffer <>
2 years agowireguard: bump to 20171221
Kevin Darbyshire-Bryant [Sat, 23 Dec 2017 19:26:52 +0000 (19:26 +0000)]
wireguard: bump to 20171221

7e945a8 version: bump snapshot
f2168aa compat: kernels < 3.13 modified genl_ops
52004fd crypto: compile on UML
6b69b65 wg-quick: dumber matching for default routes
aa35d9d wg-quick: add the "Table" config option
037c389 keygen-html: remove prebuilt file

No patch refresh required.

Compile-test-for: ar71xx
Run-tested-on: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <>
2 years agokernel: bump 4.4 to 4.4.107
Etienne Haarsma [Thu, 21 Dec 2017 09:28:16 +0000 (10:28 +0100)]
kernel: bump 4.4 to 4.4.107

Bump 4.4 to 4.4.107 and refreshed all patches.
Made the following patch for Mediatek and Oxnas compatible with kernel 4.4.107:

Compile-tested: ar71xx
Run-tested: ar71xx

Signed-off-by: Etienne Haarsma <>
Reviewed-by: Kevin Darbyshire-Bryant <>
Tested-by: Rosen Penev <>
2 years agowireguard: bump to 20171211
Kevin Darbyshire-Bryant [Tue, 12 Dec 2017 19:34:17 +0000 (19:34 +0000)]
wireguard: bump to 20171211

Bump to latest WireGuard snapshot release:

44f8e4d version: bump snapshot
bbe2f94 chacha20poly1305: wire up avx512vl for skylake-x
679e53a chacha20: avx512vl implementation
10b1232 poly1305: fix avx512f alignment bug
5fce163 chacha20poly1305: cleaner generic code
63a0031 blake2s-x86_64: fix spacing
d2e13a8 global: add SPDX tags to all files
d94f3dc chacha20-arm: fix with clang -fno-integrated-as.
3004f6b poly1305: update x86-64 kernel to AVX512F only
d452d86 tools: no need to put this on the stack
0ff098f tools: remove undocumented unused syntax
b1aa43c contrib: keygen-html for generating keys in the browser
e35e45a kernel-tree: jury rig is the more common spelling
210845c netlink: rename symbol to avoid clashes
fcf568e device: clear last handshake timer on ifdown
d698467 compat: fix 3.10 backport
5342867 device: do not clear keys during sleep on Android
88624d4 curve25519: explictly depend on AS_AVX
c45ed55 compat: support RAP in assembly
7f29cf9 curve25519: modularize dispatch

Refresh patches.

Compile-test-for: ar71xx
Run-tested-on: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <>
2 years agobrcm47xx: remove target specific network preinit config
Jo-Philipp Wich [Wed, 17 May 2017 12:36:23 +0000 (14:36 +0200)]
brcm47xx: remove target specific network preinit config

The generic preinit code is now able to setup network and switch vlan settings
from the /etc/board.json file, therefor drop the target specific code.

Fixes FS#790.

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit 833c500cb2985e9b76a1aae3b6a577977eee5457)

2 years export TMPDIR
Jo-Philipp Wich [Tue, 12 Dec 2017 15:28:04 +0000 (16:28 +0100)] export TMPDIR

Set TMPDIR to the same value as the existing TMP_DIR variable in order to
let gcc and various other utilities use the local temporary directory
instead of the system-wide one.

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit 52a3477ff91a2009e451d5dce307e9cc945e9ffa)

2 years agousbutils: Update usb.ids file to latest
Rosen Penev [Wed, 22 Nov 2017 05:57:52 +0000 (21:57 -0800)]
usbutils: Update usb.ids file to latest

Signed-off-by: Rosen Penev <>
(cherry picked from commit fc4e7bdca75f4d283374d3dfe0d0ac1cd4885612)

2 years agohostapd: remove unused local var declaration
Leon M. George [Mon, 20 Nov 2017 16:38:09 +0000 (17:38 +0100)]
hostapd: remove unused local var declaration

Signed-off-by: Leon M. George <>
(cherry picked from commit 63462910ddb01d9a7391d793228767628aa65db2)

2 years agohostapd: don't set htmode for wpa_supplicant
Leon M. George [Mon, 20 Nov 2017 16:36:55 +0000 (17:36 +0100)]
hostapd: don't set htmode for wpa_supplicant

no longer supported

Signed-off-by: Leon M. George <>
(cherry picked from commit cc0847eda337f948f5ff6e75014aa88e48779677)

2 years agolibnl-tiny: use fixed message size instead of using the page size
Felix Fietkau [Thu, 9 Nov 2017 13:39:48 +0000 (14:39 +0100)]
libnl-tiny: use fixed message size instead of using the page size

Simplifies the code and reduces size

Signed-off-by: Felix Fietkau <>
(cherry picked from commit d5bcd0240a8f42a05ef31005a9a9dea848d3f7a8)

2 years agopackages: nvram: fix memory leak in _nvram_free
Zhai Zhaoxuan [Tue, 11 Jul 2017 10:12:00 +0000 (18:12 +0800)]
packages: nvram: fix memory leak in _nvram_free

The value of nvram_tuple_t is allocated in _nvram_realloc,
but it is not freed in _nvram_free.

Signed-off-by: Zhai Zhaoxuan <>
(cherry picked from commit c382237ac33a787043b22abc42f0c5a80278baae)

2 years agomac80211: don't pass the hostapd ctrl iface in adhoc
Antonio Quartulli [Fri, 9 Nov 2012 14:23:34 +0000 (15:23 +0100)]
mac80211: don't pass the hostapd ctrl iface in adhoc

Passing the ctrl iface to wpa_supplicant will automatically cause wpa_supplicant
to send "STOP_AP" messages to the hostapd. This breaks the AP interfaces.

Signed-off-by: Antonio Quartulli <>
(cherry picked from commit 0da54fa6428ea98d31b49f5d9a4a272214f5d188)

2 years agohostapd: explicitly set beacon interval for wpa_supplicant
Sven Eckelmann [Tue, 7 Nov 2017 10:48:40 +0000 (11:48 +0100)]
hostapd: explicitly set beacon interval for wpa_supplicant

The beacon_int is currently set explicitly for hostapd and when LEDE uses
iw to join and IBSS/mesh. But it was not done when wpa_supplicant was used
to join an encrypted IBSS or mesh.

This configuration is required when an AP interface is configured together
with an mesh interface. The beacon_int= line must therefore be re-added to
the wpa_supplicant config. The value is retrieved from the the global

Fixes: 1a16cb9c67f0 ("mac80211, hostapd: always explicitly set beacon interval")
Signed-off-by: Sven Eckelmann <>
Signed-off-by: Felix Fietkau <> [rebase]
(cherry picked from commit 772afef61dc68e2470f4da130fac862ccf2fb105)

2 years agohostapd: set mcast_rate in mesh mode
Sven Eckelmann [Thu, 11 May 2017 06:56:50 +0000 (08:56 +0200)]
hostapd: set mcast_rate in mesh mode

The wpa_supplicant code for IBSS allows to set the mcast rate. It is
recommended to increase this value from 1 or 6 Mbit/s to something higher
when using a mesh protocol on top which uses the multicast packet loss as
indicator for the link quality.

This setting was unfortunately not applied for mesh mode. But it would be
beneficial when wpa_supplicant would behave similar to IBSS mode and set
this argument during mesh join like authsae already does. At least it is
helpful for companies/projects which are currently switching to 802.11s
(without mesh_fwding and with mesh_ttl set to 1) as replacement for IBSS
because newer drivers seem to support 802.11s but not IBSS anymore.

Signed-off-by: Sven Eckelmann <>
Tested-by: Simon Wunderlich <>
Signed-off-by: Felix Fietkau <> [refresh]
(cherry picked from commit 43f66943d0dbf0ed0ec2a9cb071d0fbded2fbe35)

2 years agoigmpproxy: remove firewall rules when service is stopped
Hans Dedecker [Mon, 13 Nov 2017 21:33:48 +0000 (22:33 +0100)]
igmpproxy: remove firewall rules when service is stopped

Remove multicast routing firewall rules when the igmpproxy is stopped by
triggering a firewall config change.
Keeping the firewall open from the wan for igmp and udp multicast is not
desired when the igmpproxy service is inactive.

Signed-off-by: Hans Dedecker <>
(cherry picked from commit 31ebbe34ccc066c212ef20de0856ab3a428fb801)

2 years agoopenvpn: add support to start/stop single instances
Martin Schiller [Mon, 9 Oct 2017 08:12:04 +0000 (10:12 +0200)]
openvpn: add support to start/stop single instances

Signed-off-by: Martin Schiller <>
Signed-off-by: Hans Dedecker <> (PKG_RELEASE increase)
(cherry picked from commit e2f25e607d2092cffa45196e7997854feb464232)

2 years agopackage/elfutils: add CFLAG -Wno-format-nonliteral
Alexander Couzens [Fri, 4 Aug 2017 11:09:12 +0000 (13:09 +0200)]
package/elfutils: add CFLAG -Wno-format-nonliteral

When a library is using fortify-packages GCC will complain about
"error: format not a string literal, argument types not checked".

Signed-off-by: Alexander Couzens <>
(cherry picked from commit 6ab45214644166846398e5e520d151c05cc4dd55)

2 years agotools/coreutils: install readlink
Felix Fietkau [Thu, 9 Nov 2017 11:21:15 +0000 (12:21 +0100)]
tools/coreutils: install readlink

Parts of the build system use non-portable invocation of readlink

Signed-off-by: Felix Fietkau <>
(cherry picked from commit 6bcc1c5331c797004e1b43168eb116d2d14b0102)

2 years agouhttpd: fix query string handling
Jo-Philipp Wich [Mon, 6 Nov 2017 11:04:25 +0000 (12:04 +0100)]
uhttpd: fix query string handling

Update to latest Git in order to fix potential memory corruption and invalid
memory access when handling query strings in conjunction with active basic

a235636 2017-11-04 file: fix query string handling

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit 05a4200d56efe439e298c8af3d82ac221b0e86e9)

2 years agoopenssl: fix cryptodev config dependency
Ralph Sennhauser [Sun, 22 Oct 2017 20:21:22 +0000 (22:21 +0200)]
openssl: fix cryptodev config dependency

Signed-off-by: Ralph Sennhauser <>
(cherry picked from commit f5468d248613fee51d19715e0fa6e37012c0eda7)

2 years agouqmi: replace legacy command invoke with newer type
Koen Vandeputte [Tue, 24 Oct 2017 14:20:22 +0000 (16:20 +0200)]
uqmi: replace legacy command invoke with newer type

Signed-off-by: Koen Vandeputte <>
(cherry picked from commit 06d5d01e8acb4c7012bfa1ce8d432816b98088b0)

2 years agoprocd: Always tell cmake whether to include seccomp support or not
Michal Sojka [Fri, 3 Nov 2017 21:31:42 +0000 (22:31 +0100)]
procd: Always tell cmake whether to include seccomp support or not

Without this change, when a user disables seccomp support in .config,
procd does not get recompiled unless the package is cleaned manually.
It is because when -D option is missing from cmake command line, cmake
uses cached value from the previous run where seccomp was enabled.

Signed-off-by: Michal Sojka <>
(cherry picked from commit 0e300a3a71264d8938b17f9fb0d5f1ab33a0434a)

2 years agolibunwind: disable building with ssp
Yousong Zhou [Mon, 6 Nov 2017 02:43:25 +0000 (10:43 +0800)]
libunwind: disable building with ssp

If we enable -fstack-protector while building libunwind, function
__stack_chk_fail_local will be referred to for i386 and powerpc32
arches.  This will cause link failure because the default gcc build
specs says no link_ssp if -nostdlib is given.

The error message:

    OpenWrt-libtool: link: ccache_cc -shared  -fPIC -DPIC  .libs/os-linux.o mi/.libs/init.o mi/.libs/flush_cache.o mi/.libs/mempool.o mi/.libs/strerror.o x86/.libs/is_fpreg.o x86/.libs/regname.o x86/.libs/Los-linux.o mi/.libs/backtrace.o mi/.libs/dyn-cancel.o mi/.libs/dyn-info-list.o mi/.libs/dyn-register.o mi/.libs/Ldyn-extract.o mi/.libs/Lfind_dynamic_proc_info.o mi/.libs/Lget_accessors.o mi/.libs/Lget_proc_info_by_ip.o mi/.libs/Lget_proc_name.o mi/.libs/Lput_dynamic_unwind_info.o mi/.libs/Ldestroy_addr_space.o mi/.libs/Lget_reg.o mi/.libs/Lset_reg.o mi/.libs/Lget_fpreg.o mi/.libs/Lset_fpreg.o mi/.libs/Lset_caching_policy.o x86/.libs/Lcreate_addr_space.o x86/.libs/Lget_save_loc.o x86/.libs/Lglobal.o x86/.libs/Linit.o x86/.libs/Linit_local.o x86/.libs/Linit_remote.o x86/.libs/Lget_proc_info.o x86/.libs/Lregs.o x86/.libs/Lresume.o x86/.libs/Lstep.o x86/.libs/getcontext-linux.o  -Wl,--whole-archive ./.libs/libunwind-dwarf-local.a ./.libs/libunwind-elf32.a -Wl,--no-whole-archive  -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/target-i386_i486_musl-1.1.16/usr/lib -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/target-i386_i486_musl-1.1.16/lib -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/toolchain-i386_i486_gcc-5.4.0_musl-1.1.16/usr/lib -L/var/lib/bbmnt/buildbot/slaves/dave-builder/i386_i486/build/sdk/staging_dir/toolchain-i386_i486_gcc-5.4.0_musl-1.1.16/lib -lc -lgcc  -Os -march=i486 -fstack-protector -Wl,-z -Wl,now -Wl,-z -Wl,relro -nostartfiles -nostdlib   -Wl,-soname -Wl, -o .libs/
    .libs/os-linux.o: In function `_Ux86_get_elf_image':
    os-linux.c:(.text+0x588): undefined reference to `__stack_chk_fail_local'
    x86/.libs/Lregs.o: In function `_ULx86_access_fpreg':
    Lregs.c:(.text+0x25b): undefined reference to `__stack_chk_fail_local'
    x86/.libs/Lresume.o: In function `_ULx86_resume':
    Lresume.c:(.text+0xdc): undefined reference to `__stack_chk_fail_local'
    collect2: error: ld returned 1 exit status
    Makefile:2249: recipe for target '' failed

The snippet from gcc -dumpspecs

    %{!nostdlib:%{!nodefaultlibs:%(link_ssp) %(link_gcc_c_sequence)}}

Signed-off-by: Yousong Zhou <>
(cherry picked from commit f0c37f6ceb10a1db0193d4270c6807c0b2f7a3a0)

2 years agotools/squashfs: use host cflags
Felix Fietkau [Tue, 24 Oct 2017 11:22:09 +0000 (13:22 +0200)]
tools/squashfs: use host cflags

Signed-off-by: Felix Fietkau <>
(cherry picked from commit 20d363aed395e07ff42fe648f898b17f2077cc82)

2 years agoppp: make the patches apply correctly again
Hauke Mehrtens [Mon, 16 Oct 2017 18:08:56 +0000 (20:08 +0200)]
ppp: make the patches apply correctly again

This fixes a compile problem recently introduced by me.

Fixes: f40fd43ab2f ("ppp: fix compile warning")
Signed-off-by: Hauke Mehrtens <>
(cherry picked from commit a29848c67180396656e4e8a7ef47ae5b441a7325)

2 years agoppp: fix compile warning
Hauke Mehrtens [Sun, 15 Oct 2017 12:19:20 +0000 (14:19 +0200)]
ppp: fix compile warning

Signed-off-by: Hauke Mehrtens <>
(cherry picked from commit f40fd43ab2fe0f5c707a07eb036e84af086f3066)

2 years agodropbear: fix PKG_CONFIG_DEPENDS
Hans Dedecker [Fri, 6 Oct 2017 07:21:35 +0000 (09:21 +0200)]
dropbear: fix PKG_CONFIG_DEPENDS


Signed-off-by: Hans Dedecker <>
(cherry picked from commit 834c93e00bee4f7253a5c64d1a9c8202b1082b1a)

2 years agodropbear: make ssh compression support configurable
Marcin Jurkowski [Fri, 30 Jun 2017 11:13:50 +0000 (13:13 +0200)]
dropbear: make ssh compression support configurable

Adds config option to enable compression support which is usefull
when using a terminal sessions over a slow link. Impact on binary
size is negligible but additional 60 kB (uncompressed) is needed for
a shared zlib library.

Signed-off-by: Marcin Jurkowski <>
(cherry picked from commit a816e1eac761bfdac720d00d15feb18b7b9fd1e3)

2 years agoprocd: Install seccomp-trace symlink
Michal Sojka [Tue, 12 Sep 2017 11:12:50 +0000 (13:12 +0200)]
procd: Install seccomp-trace symlink

Signed-off-by: Michal Sojka <>
(cherry picked from commit 1a5bf778fb4f8b648716d9f8275c6a0af503cfe5)

2 years agoopenvpn: update to 2.4.4
Magnus Kroken [Wed, 27 Sep 2017 17:45:32 +0000 (19:45 +0200)]
openvpn: update to 2.4.4

Fixes CVE-2017-12166: out of bounds write in key-method 1.

Remove the mirror that was temporarily added during the
2.4.3 release.

Signed-off-by: Magnus Kroken <>
(cherry picked from commit a9a37526a9df3b565f5242857d17887cb492afab)

2 years agobuild: remove @ as it's causing an error
Philip Prindeville [Tue, 19 Sep 2017 21:17:09 +0000 (15:17 -0600)]
build: remove @ as it's causing an error

Since $(DownloadMethod/unknown) is being invoked in the expansion of
$(call locked ...) anyway, you can't have an @ because the shell
doesn't know what to do with it.

Signed-off-by: Philip Prindeville <>
(cherry picked from commit 76ba01a39216b8460846808b2fc10d5ee230a324)

2 years agousbutils: avoid duplicating the git revision
Philip Prindeville [Tue, 19 Sep 2017 20:47:54 +0000 (14:47 -0600)]
usbutils: avoid duplicating the git revision

Signed-off-by: Philip Prindeville <>
(cherry picked from commit 3008fc9a7bbdcbb2563c99178ce8085396dd41e6)

2 years agodnsmasq: Pass TARGET_CPPFLAGS to Makefile
Florian Fainelli [Sat, 16 Sep 2017 23:27:37 +0000 (16:27 -0700)]
dnsmasq: Pass TARGET_CPPFLAGS to Makefile

With the introduction of the ubus notifications, we would now fail building
dnsmasq with external toolchains that don't automatically search for headers.
Pass TARGET_CPPFLAGS to the Makefile to resolve that.

Fixes: 34a206bc1194 ("dnsmasq: add ubus notifications for new leases")
Signed-off-by: Florian Fainelli <>
(cherry picked from commit ef485bb23d207e0b1031d264a6fafce01d2bdf8f)

2 years agowwan: json format in some modem definitions
Alexandru Ardelean [Mon, 4 Sep 2017 13:16:00 +0000 (16:16 +0300)]
wwan: json format in some modem definitions

Method used:
cd package/network/utils/wwan/files/data
sed -e 's/}}/}/g' -i *
sed -e 's/}\t"acm": 1/\t"acm": 1/g' -i *
sed -e 's/}\t"generic": 1/\t"generic": 1/g' -i *

Manually adjusted commas.
Validated with
for f in `ls` ; do echo $f ; python -m json.tool < $f || break ; done

Thanks to @lynxis for pointing out the commas.

Signed-off-by: Alexandru Ardelean <>
(cherry picked from commit ad510c4d62fd6dd879a02cb2253eb37c2179d9c0)

2 years agobase-files: add /etc/profile.d to conffiles
Stijn Tintel [Mon, 28 Aug 2017 11:45:23 +0000 (14:45 +0300)]
base-files: add /etc/profile.d to conffiles

Signed-off-by: Stijn Tintel <>
(cherry picked from commit ef255fc57ece1415b2a81346dde7d8ee3a32dee7)

2 years agobase-files: order conffiles alphabetically
Stijn Tintel [Mon, 28 Aug 2017 11:42:22 +0000 (14:42 +0300)]
base-files: order conffiles alphabetically

Signed-off-by: Stijn Tintel <>
(cherry picked from commit 8446d3de05d0e0a6246dba9621b15095e9073dfb)

2 years agoprocd: mdns: Support txt values with spaces
Karl Palsson [Wed, 30 Aug 2017 17:44:00 +0000 (17:44 +0000)]
procd: mdns: Support txt values with spaces

Properly quote the arguments so that you can register a service with TXT
entries that contains spaces.

   procd_add_mdns myservice tcp 9999 "key=descriptive text field 1" \
         "another=something equally verbose"

Output before:
$ avahi-browse -r -v _myservice._tcp
_myservice._tcp      local
   hostname = [blah.local]
   address = []
   port = [9999]
   txt = ["verbose" "equally" "another=something" "1" "field" "text" "key=descriptive"]

Output now:
$ avahi-browse -r -v _myservice._tcp
_myservice._tcp      local
   hostname = [blah.local]
   address = []
   port = [9999]
   txt = ["another=something equally verbose" "key=descriptive text field 1"]

Signed-off-by: Karl Palsson <>
(cherry picked from commit 7a423c389a162d2945901f0b5e7c604d36c64526)

2 years agoar71xx: fix switch port numbering on RB750r2 and RB750UPr2
João Chaínho [Thu, 31 Aug 2017 15:45:39 +0000 (16:45 +0100)]
ar71xx: fix switch port numbering on RB750r2 and RB750UPr2

This patch fixes the switch port numbering on Mikrotik RB750r2 (hEX lite) and RB750UPr2 (hEX PoE lite).
Tested on a RB750UPr2. Maybe this patch is applicable to other devices (e.g. RB951Ui-2nD, RB952Ui-5ac2nD) but I have no way to test them.

Signed-off-by: João Chaínho <>
(cherry picked from commit 61027e343025b5f47e7e79db71576e6bd5e97c1d)

2 years agoscripts/ use glob to expand target dir
Zoltan Gyarmati [Sat, 26 Aug 2017 13:14:20 +0000 (15:14 +0200)]
scripts/ use glob to expand target dir

If CONFIG_DOWNLOAD_FOLDER is set to for example "~/dl", the download
script fails to create the .hash and .dl files with the following
 Cannot create file ~/dl/dropbear-2017.75.tar.bz2.dl: No such file or directory
 sh: 1: cannot create ~/dl/dropbear-2017.75.tar.bz2.hash: Directory nonexistent

If the tarball already exists in the ~/dl dir, it's properly found and
used, so this issue only affects the script.
 This patch calls glob() on the target dir parameter, which will expand `~`.

Signed-off-by: Zoltan Gyarmati <>
(cherry picked from commit 0a761fe8ef346c6f0a78097938b083e2d078b0e2)

2 years agosamba36: Remove syslog and load printers lines.
Rosen Penev [Sat, 26 Aug 2017 03:12:13 +0000 (20:12 -0700)]
samba36: Remove syslog and load printers lines.

printer support is removed using 200-remove_printer_support.patch. the syslog parameter requires samba to be compiled with --with-syslog. Currently samba does not log to syslog and probably has not for a long time.

Signed-off-by: Rosen Penev <>
(cherry picked from commit 343e3d2ba8efe20554522419697e0e4c3038c92f)

2 years agosamba36: Don't resolve interfaces.
Rosen Penev [Thu, 24 Aug 2017 23:51:24 +0000 (16:51 -0700)]
samba36: Don't resolve interfaces.

It's redundant and also buggy. IPv6 link local addresses and ::1 are not resolved for example. Doesn't matter since lo and br-lan for example, resolve to them.

Signed-off-by: Rosen Penev <>
Acked-by: Kevin Darbyshire-Bryant <>
(cherry picked from commit b2f60e6a7245c192703528a46dfb630c664dbc0c)

2 years agosamba36: Remove guest ok since LuCI configures it.
Rosen Penev [Thu, 24 Aug 2017 23:51:23 +0000 (16:51 -0700)]
samba36: Remove guest ok since LuCI configures it.

guest ok is set per share and as such, don't override it. also, fix an error introduced in the last commit.

Signed-off-by: Rosen Penev <>
(cherry picked from commit ccb79a310c5273bf32d590323a99e72b587a0fb0)

2 years agoconfig: make CONFIG_ALL_* select other CONIFG_ALL_* options
Hauke Mehrtens [Sat, 15 Jul 2017 20:54:33 +0000 (22:54 +0200)]
config: make CONFIG_ALL_* select other CONIFG_ALL_* options

Select the other CONFIG_ALL_* options in the hierarchy when the master
option is selected. Currently CONFIG_ALL_KMODS is not selected when the
build bot selects CONFIG_ALL_NONSHARED for example.

Now the rtc kmods should get build when CONFIG_ALL_KMODS,
like it is done by the build bots for targets with rtc support.

Signed-off-by: Hauke Mehrtens <>
Acked-by: Jo-Philipp Wich <>
(cherry picked from commit 589621b1c03c25e6436d30aaa508aef2484244a6)

2 years agonvram: add help message for nvram magic not found
BangLang Huang [Fri, 24 Feb 2017 02:58:09 +0000 (10:58 +0800)]
nvram: add help message for nvram magic not found

The program would failed if nvram magic not found
in specific partition.

Signed-off-by: BangLang Huang <>
(cherry picked from commit 69da83d9f12e4e48b546fc3fc3ff555034959211)

2 years agonvram: improve argument check when program start
BangLang Huang [Fri, 24 Feb 2017 02:52:52 +0000 (10:52 +0800)]
nvram: improve argument check when program start

print help message when argument count is less
than 2.

Signed-off-by: BangLang Huang <>
(cherry picked from commit c7e2a6fe923dc86bab14d94ead322a045efca4c9)

2 years agonvram: add usage() function
BangLang Huang [Fri, 24 Feb 2017 02:45:16 +0000 (10:45 +0800)]
nvram: add usage() function

Merge the help message into a single function,
so that we can use it somewhere else.

Signed-off-by: BangLang Huang <>
(cherry picked from commit 2a253e7cdbacd1bd19da80ea6f35a93b42655c3b)

2 years agonvram: fix memory leak
BangLang Huang [Fri, 24 Feb 2017 02:16:17 +0000 (10:16 +0800)]
nvram: fix memory leak

Fix memory leak on nvram_open() and nvram_open_rdonly().

For nvram_open(), the 'fd' should be closed on error, and
mmap_area should be unmap when nvram magic can not be found.

For nvram_open_rdonly(), the 'file' variable should free before
return. Once nvram_find_mtd() return successfully, it will allocate
memory to save mtd device string.

Signed-off-by: BangLang Huang <>
(cherry picked from commit 1948d8e08c72106a01b359a30217cf92657cc79d)

2 years agoca-certificates: Update to 20170717
Christian Schoenebeck [Tue, 15 Aug 2017 18:44:17 +0000 (20:44 +0200)]
ca-certificates: Update to 20170717

Update to 20170717

Signed-off-by: Christian Schoenebeck <>
(cherry picked from commit a2a226e6e83359ca0c7547ce9fed6ce4ecabc24b)

2 years agobase-files: drop unused preinit_echo function
Rafał Miłecki [Mon, 7 Aug 2017 06:41:26 +0000 (08:41 +0200)]
base-files: drop unused preinit_echo function

It isn't used for years since the old 99_10_run_init has been dropped.

Signed-off-by: Rafał Miłecki <>
(cherry picked from commit 1e13c6f77fc02df2bd8ed237ab9208ecdefb2dab)

2 years agotools/pkg-config: Update to 0.29.2
Daniel Engberg [Tue, 8 Aug 2017 06:14:28 +0000 (08:14 +0200)]
tools/pkg-config: Update to 0.29.2

* Update pkg-config to 0.29.2
* Remove patch as it's upstreamed

Signed-off-by: Daniel Engberg <>
(cherry picked from commit 965df21fd16e5966c64f207fe053ab8b6863081f)

2 years agobase-files: suppress uci not found output in
Florian Eckert [Tue, 1 Aug 2017 12:35:18 +0000 (14:35 +0200)]
base-files: suppress uci not found output in

Fix "uci: Entry not found" output if "ttylogin" is not set in

Signed-off-by: Florian Eckert <>
(cherry picked from commit c31f0421ceb47f347ade7317f263fcd09cfe325f)

2 years agoscripts/ inhibit compile deps on missing build types
Jo-Philipp Wich [Wed, 26 Jul 2017 22:18:12 +0000 (00:18 +0200)]
scripts/ inhibit compile deps on missing build types

a not existing build type, the metadata script will emit a reference to an
unresolvable build target in tmp/.packagedeps, causing the make process to
fail hard in a way not catchable by the IGNORE_ERRORS mechanism.

In a situation where a package "test-a" declares a build dependency
"PKG_BUILD_DEPENDS:=test-b/host" while the Makefile of "test-b" does not
implement a HostBuild, make fails with an unrecoverable error in the form:

    make[1]: Entering directory '...'
    make[1]: *** No rule to make target 'package/test-b/host/compile',
                 needed by 'package/test-a/compile'.  Stop.
    make[1]: Leaving directory '...'
    .../ recipe for target 'package/test-a/compile' failed
    make: *** [package/test-a/compile] Error 2

Extend the metadata generation script to catch such unresolved references
and emit a visable warning upon detection.

After this change, the script will emit a warning similar to:

    WARNING: Makefile "package/test-a/Makefile" has a build dependency on
    "test-b/host" but "package/test-b/Makefile" does not implement a
    "host" build type

Fixes a global build cluster outage which occured after the "python-cffi"
feed package removed its HostBuild which the "python-cryptography" package
build-depended on.

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit bf5d32af2a675f7577b388b5eef2a11e6ce042eb)

2 years agobuild: do not override argv[0] in inner exec calls
Jo-Philipp Wich [Mon, 24 Jul 2017 11:33:33 +0000 (13:33 +0200)]
build: do not override argv[0] in inner exec calls

Only mangle argv[0] of the first executed process and leave the argument
vector of subsequent invocations as-is to allow child programs to properly
discover resources relative to their binary locations.

Fixes "cc1" discovery when executing the host gcc through the bundled
"ccache" executable.

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit 9e64874fb2508e49e52898c238d817bd152bf2c2)

2 years agosamba36: Remove legacy options
Rosen Penev [Fri, 21 Jul 2017 20:04:34 +0000 (13:04 -0700)]
samba36: Remove legacy options

Browseable is now set through LuCI per share, so remove it. Same with
writeable (inverted synonym for read only). domain master and preferred
master seem to be legacy settings for Windows 9x. encrypt passwords
defaults to yes. Probably should not be disabled either.

Also reordered alphabetically.

Signed-off-by: Rosen Penev <>
[rewrap commit message, fix SoB, fix author, bump pkg revsion]
Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit 9dcb3fe7eb06b42c4f026e6cc5e89b2a18932782)

2 years agoscripts/ Adjust URLs
Daniel Engberg [Sun, 25 Jun 2017 16:14:33 +0000 (18:14 +0200)]
scripts/ Adjust URLs

Internet2 isn't considered a trusted issuer meaning that https links to will fail.

The host has a trusted SSL cert and peering
is good so it can replace without performance issues.

Signed-off-by: Daniel Engberg <>
[Jo-Philipp Wich: rewrapped commit message]
Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit 99c429512622566ee2bbde69fa8efb0f2bcda33e)

2 years agobuild: fix invocation of bundled in SDK and Imagebuilder
Jo-Philipp Wich [Sun, 16 Jul 2017 21:43:19 +0000 (23:43 +0200)]
build: fix invocation of bundled in SDK and Imagebuilder

Commit 72d751cba9 "build: rework library bundling" introduced a new helper
binary "runas" whose sole purpose was mangling the argv vector passed to
the actual called ELF image so that the renamed executable could obtain the
proper name from argv[0].

This approach, however totally defeated the purpose of calling bundled ELF
executables through the shipped loader since the execv() invocation
performed by "runas" would cause the kernel the interprete the final program
image through the system ELF loader again.

To solve the problem, use an alternative approach of shipping a shared object
"" which uses an ELF ".init_array" function pointer to obtain the
argv[] vector of the to-be-executed main() function and mangle it in-place.

The actual argv[0] value to use is communicated out-of-band using an
environment variable "RUNAS_ARG0" by the shell wrapper script. The wrapper
script also takes care of setting LD_PRELOAD to instruct the shipped ELF
loader to preload the actual ELF program image with the "" helper

Fixes FS#909.

Signed-off-by: Jo-Philipp Wich <>
(cherry picked from commit ef1cafa736679eb035d405bcdf903fd1fb329865)

2 years agokmod-sched-cake: drop maintainer
Kevin Darbyshire-Bryant [Fri, 16 Jun 2017 19:06:50 +0000 (20:06 +0100)]
kmod-sched-cake: drop maintainer

Drop myself from maintainership of 'cake'.

Signed-off-by: Kevin Darbyshire-Bryant <>
(cherry picked from commit c7f8bcede6be73d0c07e058d57b55e4efc746440)

2 years agozlib: use default Build/Configure rule
Stijn Tintel [Sat, 11 Mar 2017 08:32:19 +0000 (09:32 +0100)]
zlib: use default Build/Configure rule

Signed-off-by: Stijn Tintel <>
(cherry picked from commit 462ca4e059dbead678163da26fb4e14748f3021e)

2 years agolzo: use default Build/Configure rule
Stijn Tintel [Sat, 11 Mar 2017 08:18:22 +0000 (09:18 +0100)]
lzo: use default Build/Configure rule

Signed-off-by: Stijn Tintel <>
(cherry picked from commit b3cba687a447478253f95febf17fa9376c98105d)

2 years agonetfilter: add iptables-mod-rpfilter package
Alin Nastac [Fri, 16 Jun 2017 12:16:07 +0000 (14:16 +0200)]
netfilter: add iptables-mod-rpfilter package

Unlike /proc/sys/net/ipv4/conf/INTF/rp_filter flag, rule iptables -t raw
-I PREROUTING -m rpfilter --invert -j DROP prevents conntrack table to
become full when a packet flood with randomly selected source IP addresses
is received from the lan side.

Signed-off-by: Alin Nastac <>
(cherry picked from commit d8748e537f11ab5f2b5e2ed25d94baa5ce353984)

2 years agobzip2: add symlink to binary
Daniel Golle [Wed, 5 Jul 2017 14:25:23 +0000 (16:25 +0200)]
bzip2: add symlink to binary

Other distributions incl. the OpenWrt ImageBuilder and SDK
expect to find the bzip2 executable in /bin.
Create a symlink at that location for compatibility.

Signed-off-by: Daniel Golle <>
(cherry picked from commit eb7c14d512482e18d05f61afa44205167ea094c0)

2 years agodropbear: add option to set max auth tries
Stijn Tintel [Tue, 27 Jun 2017 20:30:01 +0000 (22:30 +0200)]
dropbear: add option to set max auth tries

Add a uci option to set the new max auth tries paramater in dropbear.
Set the default to 3, as 10 seems excessive.

Signed-off-by: Stijn Tintel <>
(cherry picked from commit 6371159b4ae8b4dd94d6319ac805b0c26962bb14)

2 years agodropbear: server support option '-T' max auth tries
Kevin Darbyshire-Bryant [Sun, 25 Jun 2017 20:40:43 +0000 (21:40 +0100)]
dropbear: server support option '-T' max auth tries

Add support for '-T n' for a run-time specification for maximum number
of authentication attempts where 'n' is between 1 and compile time

A default number of tries can be specified at compile time using
'DEFAULT_AUTH_TRIES' which itself defaults to MAX_AUTH_TRIES for
backwards compatibility.

Signed-off-by: Kevin Darbyshire-Bryant <>
(cherry picked from commit 9aaf3d3501642640c9ec74268e671171c8de6103)

2 years agohostapd: configure NAS ID regardless of encryption
Yury Shvedov [Tue, 27 Jun 2017 08:43:54 +0000 (11:43 +0300)]
hostapd: configure NAS ID regardless of encryption

RADIUS protocol could be used not only for authentication but for
accounting too. Accounting could be configured for any type of networks.
However there is no way to configure NAS Identifier for non-WPA
networks without this patch.

Signed-off-by: Yury Shvedov <>
[cleanup commit message]
Signed-off-by: Stijn Tintel <>
(cherry picked from commit 37c1513b1f98c93bf84bbcedd9782568e7d4abba)

2 years agohostapd: add acct_interval option
Yury Shvedov [Tue, 27 Jun 2017 07:34:49 +0000 (10:34 +0300)]
hostapd: add acct_interval option

Make an ability to configure Accounting-Interim-Interval via UCI

Signed-off-by: Yury Shvedov <>
[add hostapd prefix, cleanup commit message]
Signed-off-by: Stijn Tintel <>
(cherry picked from commit 0e7bbcd43b6f4b54ecc5c40130b5f86cbc9f1c07)