openwrt/openwrt.git
3 years agoocteon: clean up image build code
Jo-Philipp Wich [Fri, 29 Jul 2016 13:03:19 +0000 (15:03 +0200)]
octeon: clean up image build code

Use the generic "sysupgrade-nand" build step to pack the sysupgrade file,
it performs the same steps as the inline "tar-file" macro.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 years agodnsmasq: replace the iface hotplug script with a procd trigger
Felix Fietkau [Fri, 29 Jul 2016 12:56:35 +0000 (14:56 +0200)]
dnsmasq: replace the iface hotplug script with a procd trigger

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agodnsmasq: make the check for existing DHCP servers more reliable
Felix Fietkau [Fri, 29 Jul 2016 12:26:55 +0000 (14:26 +0200)]
dnsmasq: make the check for existing DHCP servers more reliable

If there is no carrier yet, wait for 2 seconds (STP forwarding delay)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agodnsmasq: write atomic config file
Ulrich Weber [Mon, 13 Jun 2016 13:21:47 +0000 (15:21 +0200)]
dnsmasq: write atomic config file

multiple invocation of dnsmasq script (e.g. by procd and hotplugd)
might cause procd to restart dnsmasq with an incomplete config file.
Config file generation might take quite a long time on larger configs
due ubus calls for each listening interface...

Signed-off-by: Ulrich Weber <ulrich.weber@riverbed.com>
3 years agonetifd: update to the latest version
Felix Fietkau [Fri, 29 Jul 2016 14:17:40 +0000 (16:17 +0200)]
netifd: update to the latest version

Emits an initial event after the first link-up of a force_link
interface. This is needed for making the dnsmasq dhcp check more
reliable

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoprocd: add default timeout for reload trigger actions
Felix Fietkau [Fri, 29 Jul 2016 12:19:17 +0000 (14:19 +0200)]
procd: add default timeout for reload trigger actions

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoigmpproxy: remove procd_open_trigger/procd_close_trigger calls
Felix Fietkau [Fri, 29 Jul 2016 11:07:08 +0000 (13:07 +0200)]
igmpproxy: remove procd_open_trigger/procd_close_trigger calls

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agodropbear: remove procd_open_trigger/procd_close_trigger calls
Felix Fietkau [Fri, 29 Jul 2016 11:04:13 +0000 (13:04 +0200)]
dropbear: remove procd_open_trigger/procd_close_trigger calls

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agosysntpd: remove procd_open_trigger/procd_close_trigger calls
Felix Fietkau [Fri, 29 Jul 2016 11:03:57 +0000 (13:03 +0200)]
sysntpd: remove procd_open_trigger/procd_close_trigger calls

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoprocd: rework trigger handling
Felix Fietkau [Fri, 29 Jul 2016 11:00:56 +0000 (13:00 +0200)]
procd: rework trigger handling

Open/close triggers array around service_triggers call to make using
multiple triggers easier to deal with.
The API was quite confusing, because some functions contained implicit
trigger open/close calls and some didn't.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoprocd: update to the latest version
Felix Fietkau [Fri, 29 Jul 2016 12:07:09 +0000 (14:07 +0200)]
procd: update to the latest version

Fixes a long standing design issue in handling of delayed triggers

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agolibubox: update to the latest version, adds a few utility functions
Felix Fietkau [Fri, 29 Jul 2016 12:06:08 +0000 (14:06 +0200)]
libubox: update to the latest version, adds a few utility functions

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobuild: add option to enable all profiles
Felix Fietkau [Fri, 22 Jul 2016 12:29:32 +0000 (14:29 +0200)]
build: add option to enable all profiles

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobuild: add support for per-device rootfs based on device profile packges
Felix Fietkau [Fri, 22 Jul 2016 12:27:52 +0000 (14:27 +0200)]
build: add support for per-device rootfs based on device profile packges

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobuild: minor cleanup of redundant code
Felix Fietkau [Fri, 22 Jul 2016 12:04:16 +0000 (14:04 +0200)]
build: minor cleanup of redundant code

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobuild: set TMPDIR for opkg calls
Felix Fietkau [Fri, 22 Jul 2016 11:04:11 +0000 (13:04 +0200)]
build: set TMPDIR for opkg calls

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobuild: add target_params variable for getting root filesystem image parameters
Felix Fietkau [Fri, 22 Jul 2016 10:43:54 +0000 (12:43 +0200)]
build: add target_params variable for getting root filesystem image parameters

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobuild: add template for getting opkg package files from package names
Felix Fietkau [Fri, 22 Jul 2016 10:22:16 +0000 (12:22 +0200)]
build: add template for getting opkg package files from package names

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobuild: rework opkg command invocation
Felix Fietkau [Fri, 22 Jul 2016 10:10:17 +0000 (12:10 +0200)]
build: rework opkg command invocation

Drop included $(XARGS), add support for passing target dir via parameter

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobuild: remove obsolete variables from opkg command
Felix Fietkau [Fri, 22 Jul 2016 10:04:33 +0000 (12:04 +0200)]
build: remove obsolete variables from opkg command

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobuild: rework prepare_rootfs to pass target dir via parameter
Felix Fietkau [Fri, 22 Jul 2016 09:54:58 +0000 (11:54 +0200)]
build: rework prepare_rootfs to pass target dir via parameter

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoimage: add wrapper variable to get the target dir for mkfs commands
Felix Fietkau [Fri, 22 Jul 2016 08:53:12 +0000 (10:53 +0200)]
image: add wrapper variable to get the target dir for mkfs commands

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoimage: make mkfs template output to $@
Felix Fietkau [Thu, 21 Jul 2016 23:17:35 +0000 (01:17 +0200)]
image: make mkfs template output to $@

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobuild: move rootfs processing code to include/rootfs.mk so it can be reused later
Felix Fietkau [Thu, 21 Jul 2016 16:49:54 +0000 (18:49 +0200)]
build: move rootfs processing code to include/rootfs.mk so it can be reused later

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoapm821xx: only attempt to mount /boot on MyBook Live
Felix Fietkau [Thu, 28 Jul 2016 17:30:03 +0000 (19:30 +0200)]
apm821xx: only attempt to mount /boot on MyBook Live

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agolantiq: fix switch configuration for EASY80920
Hauke Mehrtens [Wed, 27 Jul 2016 19:27:54 +0000 (21:27 +0200)]
lantiq: fix switch configuration for EASY80920

The device tree description misses some Ethernet ports and there was no
model specified for this board. In addition there was no switch
specific default configuration created.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agokernel: fix crashlog issues on various architectures
Felix Fietkau [Thu, 28 Jul 2016 09:59:48 +0000 (11:59 +0200)]
kernel: fix crashlog issues on various architectures

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agolantiq: fix WBMR-300HPD switch port assignment
Felix Fietkau [Thu, 28 Jul 2016 18:52:55 +0000 (20:52 +0200)]
lantiq: fix WBMR-300HPD switch port assignment

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoocteon: fix image build
Jo-Philipp Wich [Thu, 28 Jul 2016 17:21:44 +0000 (19:21 +0200)]
octeon: fix image build

After b47f438 "build: remove image prefix from kernel files in KDIR", the
kernel image in $(KDIR) has a different name and could not be found by the
tar-file build step anymore, leading to the following error on the build
servers:

  cp: cannot stat `.../linux-octeon/lede-octeon-generic-kernel.bin': No such file or directory
  make[4]: *** [.../linux-octeon/tmp/lede-octeon-generic-ext4-sysupgrade.tar] Error 1

Adjust the path to the source kernel image in order to fix the problem.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
3 years agoar71xx: don't use D-Link DIR-505 status LED as ethernet indicator
Matthias Schiffer [Thu, 28 Jul 2016 13:59:04 +0000 (15:59 +0200)]
ar71xx: don't use D-Link DIR-505 status LED as ethernet indicator

The stock firmware uses the single LED as status indicator only. Using the
same LED both for status and as ethernet indicator is uncommon, and has
been confusing users who were using the device as a WLAN mesh node (so the
LED was just off, as no ethernet was connected).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
3 years agoar71xx: add revision detection for D-Link DIR-505 A1/A2
Matthias Schiffer [Thu, 28 Jul 2016 13:43:25 +0000 (15:43 +0200)]
ar71xx: add revision detection for D-Link DIR-505 A1/A2

The A1 image also works on the A2, correctly set AR71XX_MODEL in this case.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
3 years agobrcmfmac43430-firmware: update to v7.45.41.26
Álvaro Fernández Rojas [Wed, 27 Jul 2016 10:08:50 +0000 (12:08 +0200)]
brcmfmac43430-firmware: update to v7.45.41.26

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
3 years agobcm53xx: enable kernel symbols/drivers needed for BCM53573
Rafał Miłecki [Thu, 28 Jul 2016 12:04:58 +0000 (14:04 +0200)]
bcm53xx: enable kernel symbols/drivers needed for BCM53573

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
3 years agobcm53xx: backport DTS patches for USB 2.0 and Tenda AC9
Rafał Miłecki [Thu, 28 Jul 2016 10:43:42 +0000 (12:43 +0200)]
bcm53xx: backport DTS patches for USB 2.0 and Tenda AC9

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
3 years agobcm53xx: refresh kernel patches
Rafał Miłecki [Thu, 28 Jul 2016 10:44:17 +0000 (12:44 +0200)]
bcm53xx: refresh kernel patches

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
3 years agoar71xx: add a missing ;; to ar71xx.sh
John Crispin [Sun, 24 Jul 2016 09:17:34 +0000 (11:17 +0200)]
ar71xx: add a missing ;; to ar71xx.sh

commit 42305ae24aa7 ("ar71xx: add support for gl-mifi")

was missing a ;; breaking boot up

Signed-off-by: John Crispin <john@phrozen.org>
3 years agonetifd: Use -x hostname:$hostname instead of -H
Merlijn Wajer [Wed, 20 Jul 2016 15:23:52 +0000 (17:23 +0200)]
netifd: Use -x hostname:$hostname instead of -H

Passing the hostname is currently broken in since the shipped busybox includes this commit:
https://git.busybox.net/busybox/commit/networking/udhcp/dhcpc.c?id=2017d48c0d70bef8768efb42909e605ea8eb5a21

Before:

    Sun Jan 31 18:11:32 2016 daemon.notice netifd: Interface 'wan' is now down
    Sun Jan 31 18:11:32 2016 daemon.notice netifd: Interface 'wan' is setting up now
    Sun Jan 31 18:11:32 2016 daemon.notice netifd: wan (18158): udhcpc: option -h NAME is deprecated, use -x hostname:NAME
    Sun Jan 31 18:11:32 2016 daemon.notice netifd: wan (18158): udhcpc: malformed hex string 'WR150'

After:

    Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): udhcpc (v1.23.2) started
    Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): Sending discover...
    Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): Sending select for xxx.yyy.zzz.xyz...
    Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): Lease of xxx.yyy.zzz.xyz obtained, lease time 600

Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
3 years agobase-files: sysupgrade: fix pseudobridge upgrades
Conn O'Griofa [Wed, 27 Jul 2016 18:04:06 +0000 (19:04 +0100)]
base-files: sysupgrade: fix pseudobridge upgrades

Treat 'relayd' as an essential service to avoid connection interruptions during sysupgrade on devices configured as a pseudobridge.

Signed-off-by: Conn O'Griofa <connogriofa@gmail.com>
3 years agob53: allow ports with higher numbers than CPU port
Rafał Miłecki [Wed, 27 Jul 2016 12:15:32 +0000 (14:15 +0200)]
b53: allow ports with higher numbers than CPU port

Our code was assuming CPU port uses the highest number. My BCM53573
device has eth0 connected to port 8 and eth1 connected to port 5. While
working on support for it I tried to:
1) Enable all ports (including port 8)
2) Set CPU port to 5

I noticed port 8 is not accessible anymore. It was just a development
process but it seems like something worth fixing anyway.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
3 years agobrcm63xx: fix HG556a C button
dani [Fri, 22 Jul 2016 10:45:54 +0000 (12:45 +0200)]
brcm63xx: fix HG556a C button

One button of the HG556a-C has the wrong GPIO pin defined in the dts file,
fix it

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
3 years agomountd: update to latest git HEAD
John Crispin [Sun, 24 Jul 2016 04:25:47 +0000 (06:25 +0200)]
mountd: update to latest git HEAD

Signed-off-by: John Crispin <john@phrozen.org>
3 years agofirewall3: update to latest git HEAD
John Crispin [Sun, 24 Jul 2016 04:23:26 +0000 (06:23 +0200)]
firewall3: update to latest git HEAD

Signed-off-by: John Crispin <john@phrozen.org>
3 years agougps: update to latest git HEAD
John Crispin [Sun, 24 Jul 2016 04:14:38 +0000 (06:14 +0200)]
ugps: update to latest git HEAD

Signed-off-by: John Crispin <john@phrozen.org>
3 years agoramips: unify etc/board.d/01_leds configuration
P.Wassi [Tue, 26 Jul 2016 17:18:53 +0000 (19:18 +0200)]
ramips: unify etc/board.d/01_leds configuration

Introduce an optional parameter at the local set_usb_led and
set_wifi_led function such that they can take a triggering
device. If no parameter is passed, behaviour is unchanged.
Signed-off-by: P.Wassi <p.wassi@gmx.at>
3 years agoar71xx: add support for gl-mifi
Zhao Gang [Tue, 19 Jul 2016 02:54:11 +0000 (02:54 +0000)]
ar71xx: add support for gl-mifi

This add initial support for gl-mifi.
Product page: http://www.gl-inet.com/mifi/

Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
3 years agoramips: dch-m225 don't have ethernet. default enable wifi
Michael Lee [Wed, 20 Apr 2016 06:01:21 +0000 (14:01 +0800)]
ramips: dch-m225 don't have ethernet. default enable wifi

Signed-off-by: Michael Lee <igvtee@gmail.com>
3 years agoramips: remove indentation in etc/board.d/01_leds
Paul Wassi [Sat, 23 Jul 2016 14:25:38 +0000 (16:25 +0200)]
ramips: remove indentation in etc/board.d/01_leds

Remove indentation at end of line in base-files/etc/board.d/01_leds
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
3 years agoramips: add missing i2s alias
John Crispin [Thu, 21 Jul 2016 21:34:25 +0000 (23:34 +0200)]
ramips: add missing i2s alias

Signed-off-by: John Crispin <john@phrozen.org>
3 years agoar71xx: clean up legacy-devices.mk
Matthias Schiffer [Wed, 27 Jul 2016 14:44:16 +0000 (16:44 +0200)]
ar71xx: clean up legacy-devices.mk

Several legacy images were not buildable because of missing profile
definitions in legacy-devices.mk since MultiProfile was removed. Update
legacy-devices.mk to provide all necessary profiles, and change ordering
to match legacy.mk.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
3 years agotoolchain/gcc/arc-2016.03: Fix building on hosts with gcc 6.x
Alexey Brodkin [Wed, 27 Jul 2016 12:51:32 +0000 (15:51 +0300)]
toolchain/gcc/arc-2016.03: Fix building on hosts with gcc 6.x

On attempt to build ARC toolchain on the host with gcc 6.1 I saw the
same failure as described in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69959

This change adds a back-port of the fix from upstream gcc, see
https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=233572

Note the fix is already a part of gcc-5.4 and gcc-6.1 so no need for
the same fix for others.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
3 years agohostapd: backport mesh/ibss HT20/HT40 related fix
Felix Fietkau [Tue, 26 Jul 2016 11:47:00 +0000 (13:47 +0200)]
hostapd: backport mesh/ibss HT20/HT40 related fix

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agofstools: update to latest HEAD
Daniel Golle [Thu, 21 Jul 2016 10:13:50 +0000 (12:13 +0200)]
fstools: update to latest HEAD

Fixes duplicate ubiblock entries being listed and improves
find_mount_point to also match against a block device's
major:minor numbers (needed e.g. for /dev/root).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
3 years agobase-files: use procd init for urandom_seed
Etienne CHAMPETIER [Wed, 20 Jul 2016 12:22:44 +0000 (12:22 +0000)]
base-files: use procd init for urandom_seed

Previous implementation was blocking the init and
breaking halt/reboot/sysupgrade (reported by Daniel Golle)

v2: use procd logging, use set -e + trap for error handling

Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
3 years agomvebu: limit image builds to profile selection
Felix Fietkau [Tue, 26 Jul 2016 06:36:45 +0000 (08:36 +0200)]
mvebu: limit image builds to profile selection

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobase-files: remove support of profile-specific base-files
Felix Fietkau [Tue, 26 Jul 2016 06:14:14 +0000 (08:14 +0200)]
base-files: remove support of profile-specific base-files

It is incompatible with multi-profile builds and has not been used
in-tree anyway.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoath9k: fix warning in client mode (GH#195)
Felix Fietkau [Tue, 26 Jul 2016 06:25:51 +0000 (08:25 +0200)]
ath9k: fix warning in client mode (GH#195)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobuild: remove image prefix from kernel files in KDIR
Felix Fietkau [Thu, 21 Jul 2016 15:49:19 +0000 (17:49 +0200)]
build: remove image prefix from kernel files in KDIR

This allows the image builder to change EXTRA_IMAGE_NAME at a later
point in time without breaking the build

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agobuild: remove cpio.gz and tar.gz from regular filesystem types
Felix Fietkau [Thu, 21 Jul 2016 17:02:59 +0000 (19:02 +0200)]
build: remove cpio.gz and tar.gz from regular filesystem types

They are not used to produce regular firmware images anyway. Instead,
call their build templates directly if enabled in the config

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoimage: remove shell calls from legacy ubi/ubifs image code
Felix Fietkau [Mon, 25 Jul 2016 10:37:01 +0000 (12:37 +0200)]
image: remove shell calls from legacy ubi/ubifs image code

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agokirkwood: fix UBIFS_OPTS variable in image build
Felix Fietkau [Mon, 25 Jul 2016 10:30:13 +0000 (12:30 +0200)]
kirkwood: fix UBIFS_OPTS variable in image build

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoRemove existing old link before creating a new one
Stefan Weil [Mon, 3 Aug 2009 08:54:04 +0000 (10:54 +0200)]
Remove existing old link before creating a new one

This is needed after a kernel update, otherwise the
new link is written as linux/linux-$(LINUX_VERSION).

Signed-off-by: Stefan Weil <sw@weilnetz.de>
3 years agoapm821xx: fix atheros PCIe cards on the MR24
Christian Lamparter [Sat, 23 Jul 2016 12:20:53 +0000 (14:20 +0200)]
apm821xx: fix atheros PCIe cards on the MR24

The consolidation of the MR24 and WNDR4700 subtargets
into the nand subtarget broke MR24's atheros wlan.
This was because the wndr4700's board code used a
pci_fixup routines to supply the ath9k module with
the calibration data.

This is not necessary on the MR24 as it has standard
mini-pcie ports. Hence the two AR9380 mini-pcie cards
do not need any calibration data overrides.

Cc: chrisrblake93@gmail.com
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 years agoapm821xx: use lzma compression for the initramfs images
Christian Lamparter [Sat, 23 Jul 2016 12:20:52 +0000 (14:20 +0200)]
apm821xx: use lzma compression for the initramfs images

The MR24's u-boot takes it sweet time decompressing the
LZMA-packed initramfs image. A user reported that
compared to the old gzip method in v2: it "takes a ton
longer to decompress like 4\x the old boot time for
decompression".

This patch also fixes a issue with the WNDR4700's initramfs
image getting to big and causing the following u-boot crash
during the decompression:

"Uncompressing Multi-File Image ... Error: inflate() returned -5
out-of-mem or overwrite error - must RESET board to recover"

This patch fixes both issues by reverting the MR24's initramfs
compression method back to gzip. And choosing to compress the
initramfs within the initramfs image as LZMA by default.

Cc: chrisrblake93@gmail.com
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 years agoath9k: remove intermediate queueing patch until it is fixed properly
Felix Fietkau [Sun, 24 Jul 2016 14:45:22 +0000 (16:45 +0200)]
ath9k: remove intermediate queueing patch until it is fixed properly

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoiperf3: update to version 3.1.3
Hauke Mehrtens [Sun, 24 Jul 2016 11:42:44 +0000 (13:42 +0200)]
iperf3: update to version 3.1.3

old size:
iperf3_3.0.11-1_mips_34kc_dsp.ipk       30147

new size:
iperf3_3.1.3-1_mips_34kc_dsp.ipk        33640

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agoiperf: update to version 2.0.9
Hauke Mehrtens [Sun, 24 Jul 2016 11:42:30 +0000 (13:42 +0200)]
iperf: update to version 2.0.9

old size:
iperf_2.0.8-1_mips_34kc_dsp.ipk 27911

new size:
iperf_2.0.9-1_mips_34kc_dsp.ipk 28681

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agocyassl: update to wolfssl version 3.9.6
Hauke Mehrtens [Sun, 24 Jul 2016 11:26:46 +0000 (13:26 +0200)]
cyassl: update to wolfssl version 3.9.6

Changelog: https://www.wolfssl.com/wolfSSL/Docs-wolfssl-changelog.html

old size:
libcyassl_3.9.0-1_mips_34kc_dsp.ipk     147552

new size:
libcyassl_3.9.6-1_mips_34kc_dsp.ipk     150087

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agocurl: update to version 7.50.0
Hauke Mehrtens [Sun, 24 Jul 2016 11:23:02 +0000 (13:23 +0200)]
curl: update to version 7.50.0

Changelog: https://curl.haxx.se/changes.html

old sizes:
libcurl_7.49.0-1_mips_34kc_dsp.ipk      97569
curl_7.49.0-1_mips_34kc_dsp.ipk         37925

new sizes:
libcurl_7.50.0-1_mips_34kc_dsp.ipk      97578
curl_7.50.0-1_mips_34kc_dsp.ipk         38017

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
3 years agoopenssl: re-enable NPN by default
Felix Fietkau [Sun, 24 Jul 2016 12:43:42 +0000 (14:43 +0200)]
openssl: re-enable NPN by default

Several packages rely on it

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoopenssl: add back the CAST cipher by default
Felix Fietkau [Sun, 24 Jul 2016 12:41:50 +0000 (14:41 +0200)]
openssl: add back the CAST cipher by default

At least netatalk and some ipsec packages use it

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agotools: bring back genext2fs for apm821xx
Felix Fietkau [Sat, 23 Jul 2016 17:33:28 +0000 (19:33 +0200)]
tools: bring back genext2fs for apm821xx

This reverts commit 8c68c104eaba65273280c7a4727fbb10ab10f5af.
It is used for apm821xx, which needs ext2 (not ext4) images for some
devices.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agolinux: Get rid of 000-keep_initrafs_the_default.patch
Alexey Brodkin [Fri, 22 Jul 2016 10:18:41 +0000 (13:18 +0300)]
linux: Get rid of 000-keep_initrafs_the_default.patch

With that patch in place for initramfs no additional options are
reported for "/" partition. What's really important is missing
info about sizes. Which in its turn makes opkg think that there's
no space on "/" partition to install software.

I understand that's a sort of corner-case, people rarely install
packages on ramfs but anyways why not?

Just in case that's what I see with the patch:
---------------------->8--------------------
root@lede:/# cat /proc/mounts
rootfs / rootfs rw 0 0
proc /proc proc rw,nosuid,nodev,noexec,noatime 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,noatime 0 0
tmpfs /tmp tmpfs rw,nosuid,nodev,noatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,size=512k,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,mode=600 0 0
debugfs /sys/kernel/debug debugfs rw,noatime 0 0
---------------------->8--------------------

And without:
---------------------->8--------------------
root@lede:/# cat /proc/mounts
rootfs / rootfs rw,size=256168k,nr_inodes=32021 0 0
proc /proc proc rw,nosuid,nodev,noexec,noatime 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,noatime 0 0
tmpfs /tmp tmpfs rw,nosuid,nodev,noatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,size=512k,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,mode=600 0 0
debugfs /sys/kernel/debug debugfs rw,noatime 0 0
---------------------->8--------------------

Note how different is entry for rootfs.

And given there's no known rationale for that patch we're
getting rid of it.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: John Crispin <john@phrozen.org>
Cc: Felix Fietkau <nbd@nbd.name>
3 years agoopenssl: revert the no-ripemd change, openssh needs that cipher
Felix Fietkau [Sat, 23 Jul 2016 17:03:47 +0000 (19:03 +0200)]
openssl: revert the no-ripemd change, openssh needs that cipher

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoath10k: Support installing CT firmware for QCA9984 NICs.
Ben Greear [Thu, 21 Jul 2016 23:52:42 +0000 (16:52 -0700)]
ath10k: Support installing CT firmware for QCA9984 NICs.

This firmware has been lightly tested on non LEDE system
to date, and will be undergoing further testing and development.
Allow users to easily install this on their LEDE system as
they prefer.

Signed-off-by: Ben Greear <greearb@candelatech.com>
3 years agoath10k-ct-firmware: Update to latest 9880 firmware.
Ben Greear [Thu, 21 Jul 2016 23:52:41 +0000 (16:52 -0700)]
ath10k-ct-firmware: Update to latest 9880 firmware.

Fixes some issues with AES encryption and macbooks.

Signed-off-by: Ben Greear <greearb@candelatech.com>
3 years agoath10k-ct: Update to latest ath10k-ct driver.
Ben Greear [Thu, 21 Jul 2016 23:52:40 +0000 (16:52 -0700)]
ath10k-ct: Update to latest ath10k-ct driver.

Adds support for 9984 NICs, and an upstream bugfix or two.

Signed-off-by: Ben Greear <greearb@candelatech.com>
3 years agosunxi/pcduino3: Remove selection of absent rtl8188eu
Alexey Brodkin [Fri, 22 Jul 2016 10:04:06 +0000 (13:04 +0300)]
sunxi/pcduino3: Remove selection of absent rtl8188eu

Since commit 217a64375547 "wireless: remove rtl8188eu (staging)"
there's no point in selection of the missing module.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: John Crispin <john@openwrt.org>
Cc: Zoltan Herpai <wigyori@uid0.hu>
3 years agoopenssl: add option to disable SRP support
Dirk Feytons [Fri, 10 Jun 2016 10:02:15 +0000 (12:02 +0200)]
openssl: add option to disable SRP support

Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
3 years agoopenssl: add --gc-sections
Dirk Feytons [Thu, 2 Jun 2016 11:43:14 +0000 (13:43 +0200)]
openssl: add --gc-sections

Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
3 years agoopenssl: remove some unneeded functionality and algorithms
Dirk Feytons [Fri, 20 May 2016 13:34:02 +0000 (15:34 +0200)]
openssl: remove some unneeded functionality and algorithms

The patch needed for this commit has been sent upstream:
https://github.com/openssl/openssl/pull/1155

Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [add back bf and srp]
3 years agoopenssl: add option to disable PSK support
Dirk Feytons [Fri, 20 May 2016 15:23:28 +0000 (17:23 +0200)]
openssl: add option to disable PSK support

Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
3 years agoopenssl: add option for NPN support
Dirk Feytons [Fri, 20 May 2016 11:39:12 +0000 (13:39 +0200)]
openssl: add option for NPN support

NPN has been superseded by ALPN so NPN is disabled by default
The patch has been sent to OpenSSL for inclusion, see
https://github.com/openssl/openssl/pull/1100

Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
3 years agoopenssl: add option to disable compression support
Dirk Feytons [Thu, 19 May 2016 13:59:55 +0000 (15:59 +0200)]
openssl: add option to disable compression support

By default it's disabled. After the CRIME attack it seems the use of
compression is discouraged.

Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
3 years agoopenssl: add option to omit deprecated APIs
Dirk Feytons [Thu, 19 May 2016 11:52:45 +0000 (13:52 +0200)]
openssl: add option to omit deprecated APIs

Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
3 years agoledtrig-usbdev: fix duplicate match detection
Felix Fietkau [Sat, 23 Jul 2016 08:29:55 +0000 (10:29 +0200)]
ledtrig-usbdev: fix duplicate match detection

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoar71xx: add ath10k firmware to profile defaults where ath10k is used
Felix Fietkau [Fri, 22 Jul 2016 13:57:49 +0000 (15:57 +0200)]
ar71xx: add ath10k firmware to profile defaults where ath10k is used

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoimage.mk: create default ubifs before calling legacy image build code
Felix Fietkau [Fri, 22 Jul 2016 11:26:37 +0000 (13:26 +0200)]
image.mk: create default ubifs before calling legacy image build code

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoapm821xx: rework image build code for MyBook Live
Felix Fietkau [Thu, 21 Jul 2016 17:36:13 +0000 (19:36 +0200)]
apm821xx: rework image build code for MyBook Live

Eliminate redundant mkfs calls, preparation for upcoming image build
core rework

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoapm821xx: add DEVICE_DTS_DIR variable, remove redundant DEVICE_VARS entry
Felix Fietkau [Fri, 22 Jul 2016 09:12:34 +0000 (11:12 +0200)]
apm821xx: add DEVICE_DTS_DIR variable, remove redundant DEVICE_VARS entry

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoapm821xx: add missing default profiles for subtargets
Felix Fietkau [Thu, 21 Jul 2016 13:09:55 +0000 (15:09 +0200)]
apm821xx: add missing default profiles for subtargets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
3 years agoapm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720
Christian Lamparter [Wed, 20 Jul 2016 13:44:57 +0000 (15:44 +0200)]
apm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720

This patch adds support for Netgear Centria N900 WNDR4700/WNDR4720

hardware highlights:

CPU: AMCC PowerPC APM82181 Rev. E at 1000 MHz (PLB=166, OPB=83, EBC=83 MHz)
Security support, Boot ROM Location NAND wo/ECC 2k page (8 bits)
32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board: AMCC APM82181 Evaluation Board, PCIE0/SATA1, 1*USB OTG
DRAM: 256 MB (ECC not enabled, 500 Mb/s, 32-bit, CL3)
NAND: 128 MiB (SLC, erase size: 128 KiB, page size: 2048, OOB size: 64)
ETH: Atheros AR8327N Gigabit Switch (4 x LAN, 1 x WAN)
USB: 2 x 3.0 (Renesas uPD720202K8-711-BAA-A, firmware not included)
SATA: 1 x SATA-II 3.5" Hard Drive Bay for HDDs (DesignWare SATA).
WLAN1: Atheros AR9380 5GHz 802.11an 3:3x3
WLAN2: Atheros AR9581 2.4GHz 802.11bgn 3:3x3
SDCARD: GL827L SD/MMC/MS Flash Card Reader (on internal dwc2 USB 2.0 host)
I2C: GMT G781 (i2c-0 @ 0x4d - lm90 compatible temperature sensor)
TC654    (i2c-0 @ 0x1b - Dual PWM fan Speed controller)

WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!

INFO: Since this device only has a NAND chip. I opted for going with
root.squashfs in a UBI volume. There's no squashfs/jffs2 image.

This target produces three images.
  a. netgear factory image
     This image can be used to flash the Netgear WNDR4700 via the
     firmware recovery mechanism and the web admin site.

     The bootloader can be instructed to do a firmware recovery via the
     # fw_recovery
     command. It will start a tftp server and listen on 192.168.1.1
     (the ipaddr variable in u-boot) for incoming, binary tftp clients.
     The firmware recovery mechanism is also started if any of the flash
     content which contains the kernel, device-tree definitions or the
     (fake)rootfs fails to verify or load.

  b. sysupgrade.tar image for sysupgrade
     An sysupgrade will replace the entire current LEDE installation
     with a newer version. This does include the kernel and the ubi rootfs
     partition. The configuration can be carried over automatically as well
     if desired.

     simply copy the sysupgrade.tar to a the WNDR4700 running LEDE and run:

     root@lede:~# sysupgrade sysupgrade.tar

     and let it reboot.

     Note: The devicetree flash area is NOT updated. Until the devicetree
   definition is stable, this can lead to all sorts of hardware
   detection problems! So make sure, if you experience issues: try
   the fw_recovery. If you are unsure whenever this affects you:
   test if you can reproduce your issue with the initramfs method.
   As it will always have up-to-date device-tree definitions.

  c. initramfs image for TFTP (for development and testing)
     To use the initramfs method, follow the following steps:
       1) Move the "lede-apm821xx-netgear-WNDR4700-initramfs-kernel.bin"
  file to to the root directory of your TFTP server.

       2) rename it to wndr4700.bin

       3) On the WNDR4700 - Hit Enter during u-boot and insert:
  # tftp 400000 wndr4700.bin; run addtty; bootm 400000 -

     This will boot the LEDE image.

     Note: The default tftp server is 192.168.1.7, if you want to change it:
     # setenv serverip 192.168.8.7;

     Note2: The default address for the WNDR4700 is 192.168.1.1:
     # setenv ipaddr 192.168.8.8;

     Note: Connect you tftp server on the last LAN port (not the WAN)

Note: The firmware for the USB 3.0 Host chip is not included anymore.
Therefore the two USB 3.0 ports will not work without the
uPD7070x-firmware package installed.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 years agoapm821xx: lm90 add thermal sensor interface support for device tree
Christian Lamparter [Wed, 20 Jul 2016 13:44:56 +0000 (15:44 +0200)]
apm821xx: lm90 add thermal sensor interface support for device tree

 From 912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch:
"This patch adds to lm90 temperature sensor the possibility
to expose itself as thermal zone device, registered on the
thermal framework.

The thermal zone is built only if a device tree node
describing a thermal zone for this sensor is present
inside the lm90 DT node. Otherwise, the driver behavior
will be the same."

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 years agoapm821xx: tc654: add driver for Microchip TC654/TC655 PWM fan controllers
Christian Lamparter [Wed, 20 Jul 2016 13:44:55 +0000 (15:44 +0200)]
apm821xx: tc654: add driver for Microchip TC654/TC655 PWM fan controllers

This patch adds a hwmon driver for the Microchip TC654 and TC655
Dual SMBus PWM Fan Speed Controllers with Fan Fault detection.

The chip is described in the DS2001734C Spec Document from Microchip.
It supports:
- Shared PWM Fan Drive for two fans
- Provides RPM
- automatic PWM controller (needs additional
  NTC/PTC Thermistors.)
- Overtemperature alarm (when using NTC/PTC
  Thermistors)

The TC654 is used by the Netgear WNDR47X0 to control its
system fan.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 years agoapm821xx: add support for the Western Digital MyBook Live Series
Christian Lamparter [Wed, 20 Jul 2016 13:44:54 +0000 (15:44 +0200)]
apm821xx: add support for the Western Digital MyBook Live Series

Hardware Highlights:

This patch adds support for Western Digital MyBook Live Series:
CPU: AMCC PowerPC  UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
     32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board: Apollo-3G - APM82181 Board, 1*SATA
DRAM:  256 MB (2x NT5TU64M16GG-AC)
FLASH: 512 kB (SST 39VF040)
Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610

WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!

The MyBook Live Duo additionally features a 1x USB 2.0 host port
and can support a second hard-drive.

This target produces two images for a target.
 1. ext4 image
    The extracted/raw image can be directly installed on
    the internal HDD via "dd if=img.ext4 of=/dev/sdX".

    This can either be done in place with the stock MyBook Live
    firmware via ssh. Or by removing the HDD and writing the image
    with a different PC.

    The the compressed images are useful for sysupgrade.

 2. recovery.tar image for TFTP and Serial.

    extract the recovery.tar to a TFTP server directory.

    On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert:
    # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self

    Where 192.168.1.254 is your TFTP server.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 years agoapm821xx: sata_dwc_460ex: backport fixes and cleanups from 4.7
Christian Lamparter [Wed, 20 Jul 2016 13:44:53 +0000 (15:44 +0200)]
apm821xx: sata_dwc_460ex: backport fixes and cleanups from 4.7

This patch fixes the sata_dwc_460ex SATA driver which is used
by the SATA controllers in the MyBook Live Series and WNDR4700.

The code was backported from the upstream kernel.
It can be dropped completely on 4.7+.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 years agoapm821xx: dw_dmac: backport fixes and cleanups from 4.7
Christian Lamparter [Wed, 20 Jul 2016 13:44:52 +0000 (15:44 +0200)]
apm821xx: dw_dmac: backport fixes and cleanups from 4.7

This patch fixes the dw_dmac dma engine which is used
by the SATA controllers in the MyBook Live Series and WNDR4700.

The code was backported from the upstream kernel.
It can be dropped completely on 4.7+.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 years agoapm821xx: add support for the Cisco Meraki MR24
Chris Blake [Wed, 20 Jul 2016 13:44:51 +0000 (15:44 +0200)]
apm821xx: add support for the Cisco Meraki MR24

This patch adds support for the Cisco Meraki MR24 Access point
to the apm821xx target.

Board: MR24 - Meraki MR24 Cloud Managed Access Point
CPU: APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100)
Flash size: 32MiB
RAM Size: 128MiB
Wireless: Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz
Ethernet ports: 1x Gigabit Atheros AR8035

WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!

For flashing instructions, visit:
<https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
3 years agoapm821xx: add support for the apm821xx device target
Chris Blake [Wed, 20 Jul 2016 13:44:50 +0000 (15:44 +0200)]
apm821xx: add support for the apm821xx device target

This adds a new target for PowerPC APM82181 and APM82161
(464-based) boards, as well as adds support for the booke-wdt
watchdog package.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
3 years agoppc4xx: remove booke-wdt watchdog package
Christian Lamparter [Wed, 20 Jul 2016 13:44:49 +0000 (15:44 +0200)]
ppc4xx: remove booke-wdt watchdog package

This patch gets rid of the booke watchdog kmod package.
Instead the affected boards will enable it in their
kernel configs.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
3 years agolantiq: fix image creation of P2812HNUF3 & BTHOMEHUBV3A
Mathias Kresin [Fri, 22 Jul 2016 06:59:01 +0000 (08:59 +0200)]
lantiq: fix image creation of P2812HNUF3 & BTHOMEHUBV3A

Both devices were converted to the new image build code but still using
the LegacyDevice define. Therefore an image isn't created for the
mentioned devices.

Signed-off-by: Mathias Kresin <dev@kresin.me>