From 04d6753d03e3a6db07b7a2d3296774d0965bbbfa Mon Sep 17 00:00:00 2001 From: =?utf8?q?Petr=20=C5=A0tetiar?= Date: Tue, 5 Nov 2019 21:51:23 +0100 Subject: [PATCH] Revert "ipq806x: fix EA8500 switch control" MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit There is a problem with the EA8500, the switch will not work after soft reboot, the only way to get it working again is to power cycle it manually. There are probably several issues in the play, it's quite hard to fix it without having access to the actual device, so I don't see any other option now, then revert the offending commit. Ref: PR#2047 Fixes: FS#2168 ("Switch no longer work after restart on Linksys EA8500") Reported-by: Adam <424778940z@gmail.com> Signed-off-by: Petr Å tetiar --- .../arch/arm/boot/dts/qcom-ipq8064-ea8500.dts | 20 ++++--------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts index 91c358d245..ca8376afd7 100644 --- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts +++ b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts @@ -39,10 +39,6 @@ soc { pinmux@800000 { - - pinctrl-0 = <&switch_reset>; - pinctrl-names = "default"; - button_pins: button_pins { mux { pins = "gpio65", "gpio67", "gpio68"; @@ -70,16 +66,6 @@ }; }; - switch_reset: switch_reset_pins { - mux { - pins = "gpio63"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - output-low; - }; - }; - mdio0_pins: mdio0_pins { mux { pins = "gpio0", "gpio1"; @@ -178,6 +164,10 @@ status = "ok"; }; + pcie2: pci@1b900000 { + status = "ok"; + }; + nand@1ac00000 { status = "ok"; @@ -408,5 +398,3 @@ }; }; -/delete-node/ &pcie2_pins; -/delete-node/ &pcie2; -- 2.30.2