From 0cf32de17c47c7625c7ee9cc7d21c3489d86311b Mon Sep 17 00:00:00 2001 From: =?utf8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 9 Nov 2018 22:28:31 +0100 Subject: [PATCH] bcm53xx: add DT patch describing pins mux controller MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit It's needed to support new devices that use specific pin functions. Signed-off-by: Rafał Miłecki --- ...-Describe-Northstar-pins-mux-control.patch | 73 +++++++++++++++++++ 1 file changed, 73 insertions(+) create mode 100644 target/linux/bcm53xx/patches-4.14/131-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch diff --git a/target/linux/bcm53xx/patches-4.14/131-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch b/target/linux/bcm53xx/patches-4.14/131-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch new file mode 100644 index 0000000000..7b2904acbc --- /dev/null +++ b/target/linux/bcm53xx/patches-4.14/131-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch @@ -0,0 +1,73 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 9 Nov 2018 09:53:56 +0100 +Subject: [PATCH] ARM: dts: BCM5301X: Describe Northstar pins mux controller +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This describes hardware & will allow referencing pin functions. The +first usage is UART1 which allows supporting devices using it. + +Signed-off-by: Rafał Miłecki +--- + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -37,6 +37,8 @@ + reg = <0x0400 0x100>; + interrupts = ; + clocks = <&iprocslow>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinmux_uart1>; + status = "disabled"; + }; + }; +@@ -391,6 +393,48 @@ + status = "disabled"; + }; + ++ dmu@1800c000 { ++ compatible = "simple-bus"; ++ ranges = <0 0x1800c000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ cru@100 { ++ compatible = "simple-bus"; ++ reg = <0x100 0x1a4>; ++ ranges; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ pin-controller@1c0 { ++ compatible = "brcm,bcm4708-pinmux"; ++ reg = <0x1c0 0x24>; ++ reg-names = "cru_gpio_control"; ++ ++ spi-pins { ++ groups = "spi_grp"; ++ function = "spi"; ++ }; ++ ++ i2c { ++ groups = "i2c_grp"; ++ function = "i2c"; ++ }; ++ ++ pwm { ++ groups = "pwm0_grp", "pwm1_grp", ++ "pwm2_grp", "pwm3_grp"; ++ function = "pwm"; ++ }; ++ ++ pinmux_uart1: uart1 { ++ groups = "uart1_grp"; ++ function = "uart1"; ++ }; ++ }; ++ }; ++ }; ++ + lcpll0: lcpll0@1800c100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; -- 2.30.2