From 0e8ba8ffcdeebc1b95cb3e9b2150d08af19244cc Mon Sep 17 00:00:00 2001 From: =?utf8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 18 Dec 2015 15:27:16 +0000 Subject: [PATCH] brcm47xx: fix switch config for devices with WAN port 0 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Commit r47866 dropped default values which were handling WAN interface at port 0. Fix it by handling 2 more cases on NVRAM values. Signed-off-by: Rafał Miłecki SVN-Revision: 47932 --- .../brcm47xx/base-files/etc/board.d/01_detect | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/target/linux/brcm47xx/base-files/etc/board.d/01_detect b/target/linux/brcm47xx/base-files/etc/board.d/01_detect index 841aafac35..76ceac65fa 100755 --- a/target/linux/brcm47xx/base-files/etc/board.d/01_detect +++ b/target/linux/brcm47xx/base-files/etc/board.d/01_detect @@ -17,6 +17,13 @@ detect_by_vlanports() { ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0" + elif [ "${vlan0ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \ + [ "${vlan1ports:0:9}" = "1 2 3 4 8" -a "${vlan2ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \ + [ "${vlan2ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ]; + then + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "8@eth0" + elif [ "${vlan0ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \ [ "${vlan1ports:0:9}" = "0 1 2 3 5" -a "${vlan2ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \ [ "${vlan2ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ]; @@ -24,6 +31,13 @@ detect_by_vlanports() { ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + elif [ "${vlan0ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \ + [ "${vlan1ports:0:9}" = "1 2 3 4 5" -a "${vlan2ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \ + [ "${vlan2ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ]; + then + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" + else logger -t "01_detect" "Unable to determine network configuration" ucidef_set_interface_lan "eth0" -- 2.30.2