From 39e9bfb18199b046bd3b613002112e4e6dd53658 Mon Sep 17 00:00:00 2001 From: Henryk Heisig Date: Fri, 15 Dec 2017 15:57:49 +0100 Subject: [PATCH 1/1] ramips: add support for TP-Link TL-MR3420 v5 TP-Link TL-MR3420 v5 are simple N300 router with 5-port FE switch and non-detachable antennas. Its very similar to TP-Link TL-WR841N V13. Specification: - MT7628N/N (580 MHz) - 64 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x external, non-detachable antennas - USB 2.0 Port - UART (J1) header on PCB (115200 8n1) - 8x LED, 2x button, power input switch Flash instruction: The only way to flash LEDE image in mr3420v5 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.225/24 and tftp server. 2. Rename "lede-ramips-mt7628-tplink_tl-mr3420-v5-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Henryk Heisig --- .../ramips/base-files/etc/board.d/01_leds | 6 ++ .../ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/etc/diag.sh | 1 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/TL-MR3420V5.dts | 86 +++++++++++++++++++ target/linux/ramips/image/mt76x8.mk | 14 +++ 6 files changed, 109 insertions(+) create mode 100644 target/linux/ramips/dts/TL-MR3420V5.dts diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index a5c51c7c88..a1c0c0e690 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -381,6 +381,12 @@ tl-wr841n-v13) ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" ;; +tplink,tl-mr3420-v5) + set_usb_led "$boardname:green:usb" + set_wifi_led "$boardname:green:wlan" + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" + ;; u25awf-h1) set_wifi_led "u25awf:red:wifi" ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 5a64bb727a..b8116c773b 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -173,6 +173,7 @@ ramips_setup_interfaces() mzk-wdpr|\ rb750gr3|\ rt-n14u|\ + tplink,tl-mr3420-v5|\ tl-wr840n-v4|\ tl-wr840n-v5|\ tl-wr841n-v13|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index e7b49a5039..6ad22f56c8 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -37,6 +37,7 @@ get_status_led() { nbg-419n2|\ pwh2004|\ r6220|\ + tplink,tl-mr3420-v5|\ tl-wr840n-v4|\ tl-wr840n-v5|\ tl-wr841n-v13|\ diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 68b47eeba0..8160f5d388 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -240,6 +240,7 @@ platform_check_image() { c20i|\ c50|\ mr200|\ + tplink,tl-mr3420-v5|\ tl-wr840n-v4|\ tl-wr840n-v5|\ tl-wr841n-v13) diff --git a/target/linux/ramips/dts/TL-MR3420V5.dts b/target/linux/ramips/dts/TL-MR3420V5.dts new file mode 100644 index 0000000000..fdb09dcd6e --- /dev/null +++ b/target/linux/ramips/dts/TL-MR3420V5.dts @@ -0,0 +1,86 @@ +/dts-v1/; + +#include "TL-WR84XN.dtsi" + +#include +#include + +/ { + compatible = "tplink,tl-mr3420-v5", "mediatek,mt7628an-soc"; + model = "TP-Link TL-MR3420 v5"; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + lan { + label = "tl-mr3420-v5:green:lan"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + power { + label = "tl-mr3420-v5:green:power"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "tl-mr3420-v5:green:usb"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "tl-mr3420-v5:green:wan"; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + }; + + wan_amber { + label = "tl-mr3420-v5:amber:wan"; + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "tl-mr3420-v5:green:wlan"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "tl-mr3420-v5:green:wps"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "i2s", "p2led_an", "refclk", "uart1", "wdt", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index e11a89bb55..8bbbcf6ad9 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -139,6 +139,20 @@ define Device/tl-wr841n-v13 endef TARGET_DEVICES += tl-wr841n-v13 +define Device/tplink_tl-mr3420-v5 + $(Device/tplink) + DTS := TL-MR3420V5 + IMAGE_SIZE := 7808k + DEVICE_TITLE := TP-Link TL-MR3420 v5 + TPLINK_FLASHLAYOUT := 8Mmtk + TPLINK_HWID := 0x34200005 + TPLINK_HWREV := 0x5 + TPLINK_HWREVADD := 0x5 + TPLINK_HVERSION := 3 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport +endef +TARGET_DEVICES += tplink_tl-mr3420-v5 + define Device/u7628-01-128M-16M DTS := U7628-01-128M-16M IMAGE_SIZE := 16064k -- 2.30.2