From 3bb20dedcd822ad5ed44e8bb2bcff7b15d447eef Mon Sep 17 00:00:00 2001 From: Luka Perkov Date: Fri, 23 May 2014 08:16:56 +0000 Subject: [PATCH] kirkwood: add Pogoplug E02 kernel support for 3.14 This also fixes a typo in the UBIFS_OPTS Signed-off-by: Felix Kaechele SVN-Revision: 40827 --- .../patches-3.14/150-pogoplug_e02.patch | 127 ++++++++++++++++++ .../linux/kirkwood/profiles/120-pogoplug.mk | 2 +- 2 files changed, 128 insertions(+), 1 deletion(-) create mode 100644 target/linux/kirkwood/patches-3.14/150-pogoplug_e02.patch diff --git a/target/linux/kirkwood/patches-3.14/150-pogoplug_e02.patch b/target/linux/kirkwood/patches-3.14/150-pogoplug_e02.patch new file mode 100644 index 0000000000..44b4c52556 --- /dev/null +++ b/target/linux/kirkwood/patches-3.14/150-pogoplug_e02.patch @@ -0,0 +1,127 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood- + kirkwood-nsa310a.dtb \ + kirkwood-openblocks_a6.dtb \ + kirkwood-openblocks_a7.dtb \ ++ kirkwood-pogo_e02.dtb \ + kirkwood-sheevaplug.dtb \ + kirkwood-sheevaplug-esata.dtb \ + kirkwood-topkick.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts +@@ -0,0 +1,114 @@ ++/dts-v1/; ++ ++#include "kirkwood.dtsi" ++#include "kirkwood-6281.dtsi" ++ ++/ { ++ model = "Cloud Engines Pogoplug E02"; ++ compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x00000000 0x10000000>; ++ }; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200n8 earlyprintk"; ++ }; ++ ++ ocp@f1000000 { ++ pinctrl: pinctrl@10000 { ++ pmx_usb_power_enable: pmx-usb-power-enable { ++ marvell,pins = "mpp29"; ++ marvell,function = "gpio"; ++ }; ++ pmx_led_green: pmx-led_green { ++ marvell,pins = "mpp48"; ++ marvell,function = "gpio"; ++ }; ++ pmx_led_orange: pmx-led_orange { ++ marvell,pins = "mpp49"; ++ marvell,function = "gpio"; ++ }; ++ }; ++ serial@12000 { ++ status = "ok"; ++ }; ++ }; ++ gpio-leds { ++ compatible = "gpio-leds"; ++ pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange ++ &pmx_led_green >; ++ pinctrl-names = "default"; ++ ++ health { ++ label = "status:green:health"; ++ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; ++ default-state = "keep"; ++ }; ++ fault { ++ label = "status:orange:fault"; ++ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-0 = <&pmx_usb_power_enable>; ++ pinctrl-names = "default"; ++ ++ usb_power: regulator@1 { ++ compatible = "regulator-fixed"; ++ reg = <1>; ++ regulator-name = "USB Power"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ enable-active-high; ++ regulator-always-on; ++ regulator-boot-on; ++ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++}; ++ ++&nand { ++ chip-delay = <40>; ++ status = "okay"; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x0000000 0x100000>; ++ read-only; ++ }; ++ ++ partition@100000 { ++ label = "uImage"; ++ reg = <0x0100000 0x400000>; ++ }; ++ ++ partition@500000 { ++ label = "pogoplug"; ++ reg = <0x0500000 0x2000000>; ++ }; ++ ++ partition@2500000 { ++ label = "root"; ++ reg = <0x02500000 0x5b00000>; ++ }; ++}; ++ ++&mdio { ++ status = "okay"; ++ ++ ethphy0: ethernet-phy@0 { ++ reg = <0>; ++ }; ++}; ++ ++ð0 { ++ status = "okay"; ++ ethernet0-port@0 { ++ phy-handle = <ðphy0>; ++ }; ++}; diff --git a/target/linux/kirkwood/profiles/120-pogoplug.mk b/target/linux/kirkwood/profiles/120-pogoplug.mk index 47672f1114..d712dcb618 100644 --- a/target/linux/kirkwood/profiles/120-pogoplug.mk +++ b/target/linux/kirkwood/profiles/120-pogoplug.mk @@ -15,7 +15,7 @@ define Profile/POGOE02/Description Package set compatible with Cloud Engines Pogoplug E02 board. endef -POGOE02_UBIFS_OPTS:="-m 2048 -e 128KiB -c 4096" +POGOE02_UBIFS_OPTS:="-m 2048 -e 126KiB -c 4096" POGOE02_UBI_OPTS:="-m 2048 -p 128KiB -s 512" $(eval $(call Profile,POGOE02)) -- 2.30.2