From 51bca43f39f0d53ef4b5facd5484347655255b12 Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Fri, 9 Sep 2016 21:12:49 +0200 Subject: [PATCH] ramips: fix edimax 6200nl switch config With 3a9752bbd2bc00e407b5dcad21789720f40abf0e and later changes to ramips_set_preinit_iface() the default vlan config applied during preinit was changed. These changes were made without updating the default network config to ensure that vlan interfaces used for lan/wan are still configured. Fix the issue by using the default all LAN portmap and disabling not connected switch ports using portdisable device tree parameter. Signed-off-by: Mathias Kresin --- target/linux/ramips/base-files/etc/board.d/02_network | 1 - target/linux/ramips/dts/3G-6200NL.dts | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index b884373325..0400e58cda 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -58,7 +58,6 @@ ramips_setup_interfaces() ucidef_add_switch_attr "switch0" "enable" "false" ucidef_set_interface_lan "eth0" ;; - 3g-6200nl|\ mlw221|\ mr-102n) ucidef_set_interface_lan "eth0.2" diff --git a/target/linux/ramips/dts/3G-6200NL.dts b/target/linux/ramips/dts/3G-6200NL.dts index 5ae43b81cb..7ef7618f68 100644 --- a/target/linux/ramips/dts/3G-6200NL.dts +++ b/target/linux/ramips/dts/3G-6200NL.dts @@ -81,7 +81,7 @@ }; &esw { - mediatek,portmap = <0x2f>; + mediatek,portdisable = <0x37>; }; &wmac { -- 2.30.2