From 565814a5eeb9252d0586c9c7a576f7d1cc9d4bc3 Mon Sep 17 00:00:00 2001 From: Mark Mentovai Date: Mon, 12 Apr 2021 11:59:20 -0400 Subject: [PATCH] ipq806x: ubnt,unifi-ac-hd: reorder eth0 and eth1 The Ubiquiti UniFi AC HD (UAP-AC-HD, UAP301) has two Ethernet ports, labeled MAIN and SECONDARY, connected to gmac2 and gmac1, respectively. The standard probe order results in gmac1/SECONDARY being eth0 and gmac2/MAIN being eth1. This does not match the stock firmware, is contrary to user expectation, causes the wrong (high) MAC address to be used in a bridged configuration (the default for this device), and makes the gmac2/MAIN port unusable in the preinit environment (such as for failsafe). Until a recent patch, gmac1/SECONDARY (eth0) was not even usable. This reorders the ports so that gmac2/MAIN is eth0, and the now-working gmac1/SECONDARY is eth1. eth0 has the low MAC address and eth1 has the high; when bridged, the bridge takes on the correct low MAC address. This matches the stock firmware. The MAIN port is usable for failsafe during preinit. This device does not have a switch on board, so there's no possibility to remap ports via switch configuration. "ip link set $interface name" is used instead, during preinit before networking is configured. Signed-off-by: Mark Mentovai Build-tested: ipq806x/ubnt,unifi-ac-hd Run-tested: ipq806x/ubnt,unifi-ac-hd --- .../ipq806x/base-files/lib/preinit/04_reorder_eth | 13 +++++++++++++ .../arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts | 4 ++-- 2 files changed, 15 insertions(+), 2 deletions(-) create mode 100644 target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth diff --git a/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth b/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth new file mode 100644 index 0000000000..9f58473617 --- /dev/null +++ b/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth @@ -0,0 +1,13 @@ +. /lib/functions.sh + +preinit_reorder_eth() { + case $(board_name) in + ubnt,unifi-ac-hd) + ip link set eth0 name ethtmp + ip link set eth1 name eth0 + ip link set ethtmp name eth1 + ;; + esac +} + +boot_hook_add preinit_main preinit_reorder_eth diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts index 70c51b90f3..672be3ca2c 100644 --- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts +++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts @@ -16,8 +16,8 @@ led-running = &led_dome_blue; led-upgrade = &led_dome_blue; mdio-gpio0 = &mdio0; - ethernet0 = &gmac1; - ethernet1 = &gmac2; + ethernet0 = &gmac2; + ethernet1 = &gmac1; }; leds { -- 2.30.2