From 6bfdc7c99874d8f0ec72c4cd84ef9179e4c939bf Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 27 Jan 2010 21:01:48 +0000 Subject: [PATCH] rtl8366s: reset the chip early, this allows ethernet to work as soon as possible SVN-Revision: 19355 --- .../files/drivers/net/phy/rtl8366s.c | 54 ++++++++++++------- 1 file changed, 34 insertions(+), 20 deletions(-) diff --git a/target/linux/generic-2.6/files/drivers/net/phy/rtl8366s.c b/target/linux/generic-2.6/files/drivers/net/phy/rtl8366s.c index 833e455dd0..babeddc44a 100644 --- a/target/linux/generic-2.6/files/drivers/net/phy/rtl8366s.c +++ b/target/linux/generic-2.6/files/drivers/net/phy/rtl8366s.c @@ -26,7 +26,7 @@ #endif #define RTL8366S_DRIVER_DESC "Realtek RTL8366S ethernet switch driver" -#define RTL8366S_DRIVER_VER "0.2.0" +#define RTL8366S_DRIVER_VER "0.2.1" #define RTL8366S_PHY_NO_MAX 4 #define RTL8366S_PHY_PAGE_MAX 7 @@ -230,6 +230,31 @@ static inline struct rtl8366s *sw_to_rtl8366s(struct switch_dev *sw) return container_of(sw, struct rtl8366s, dev); } +static int rtl8366s_reset_chip(struct rtl8366s *rtl) +{ + struct rtl8366_smi *smi = &rtl->smi; + int timeout = 10; + u32 data; + + rtl8366_smi_write_reg(smi, RTL8366_RESET_CTRL_REG, + RTL8366_CHIP_CTRL_RESET_HW); + do { + msleep(1); + if (rtl8366_smi_read_reg(smi, RTL8366_RESET_CTRL_REG, &data)) + return -EIO; + + if (!(data & RTL8366_CHIP_CTRL_RESET_HW)) + break; + } while (--timeout); + + if (!timeout) { + printk("Timeout waiting for the switch to reset\n"); + return -EIO; + } + + return 0; +} + static int rtl8366s_read_phy_reg(struct rtl8366s *rtl, u32 phy_no, u32 page, u32 addr, u32 *data) { @@ -1301,25 +1326,11 @@ static int rtl8366s_sw_set_port_pvid(struct switch_dev *dev, int port, int val) static int rtl8366s_sw_reset_switch(struct switch_dev *dev) { struct rtl8366s *rtl = sw_to_rtl8366s(dev); - struct rtl8366_smi *smi = &rtl->smi; - int timeout = 10; - u32 data; - - rtl8366_smi_write_reg(smi, RTL8366_RESET_CTRL_REG, - RTL8366_CHIP_CTRL_RESET_HW); - do { - msleep(1); - if (rtl8366_smi_read_reg(smi, RTL8366_RESET_CTRL_REG, &data)) - return -EIO; - - if (!(data & RTL8366_CHIP_CTRL_RESET_HW)) - break; - } while (--timeout); + int err; - if (!timeout) { - printk("Timeout waiting for the switch to reset\n"); - return -EIO; - } + err = rtl8366s_reset_chip(rtl); + if (err) + return err; return rtl8366s_reset_vlan(rtl); } @@ -1553,8 +1564,11 @@ static int rtl8366s_setup(struct rtl8366s *rtl) dev_info(rtl->parent, "RTL%04x ver. %u chip found\n", chip_id, chip_ver & RTL8366S_CHIP_VERSION_MASK); - rtl8366s_debugfs_init(rtl); + ret = rtl8366s_reset_chip(rtl); + if (ret) + return ret; + rtl8366s_debugfs_init(rtl); return 0; } -- 2.30.2