From 740c755805810f7179891099bae984436f20ff56 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 7 Nov 2014 19:41:07 +0000 Subject: [PATCH] mac80211: update to wireless-testing 2014-11-04 Signed-off-by: Felix Fietkau SVN-Revision: 43210 --- package/kernel/mac80211/Makefile | 4 +- .../patches/008-fix_netdev_unregister.patch | 2 +- .../patches/060-no_local_ssb_bcma.patch | 2 +- .../patches/100-revert_aes_ccm_port.patch | 10 +- .../110-mac80211_keep_keys_on_stop_ap.patch | 2 +- .../patches/150-disable_addr_notifier.patch | 6 +- .../kernel/mac80211/patches/210-ap_scan.patch | 2 +- ...-for-reporting-tx-power-to-mac80211.patch} | 0 ...-fix-typo-in-starting-baserate-for-r.patch | 20 -- ..._INFO_IN_USE-for-current-channel-on.patch} | 5 +- .../303-ath9k-Use-sta_state-callback.patch | 55 ---- ...-ath9k-Enable-multi-channel-properly.patch | 82 ------ ...304-ath9k-Fix-RTC_DERIVED_CLK-usage.patch} | 0 .../305-ath9k-Process-beacons-properly.patch | 37 --- ...pointer-dereference-in-b43_phy_copy.patch} | 0 .../patches/306-ath9k-Unify-reset-API.patch | 108 -------- ...debugfs-when-not-using-chan-context.patch} | 0 ...-Set-ATH_OP_HW_RESET-before-HW-reset.patch | 55 ---- ...regression-in-bssidmask-calculation.patch} | 0 ...-Disable-beacon-tasklet-during-reset.patch | 29 -- ...-do-not-align-payload-on-modern-H-W.patch} | 0 ...09-ath9k-Clear-NoA-schedule-properly.patch | 36 --- ...k-Use-configurable-timeout-for-flush.patch | 57 ---- .../311-ath9k-Fix-MCC-flush-timeout.patch | 68 ----- ...2-ath9k-Fix-offchannel-flush-timeout.patch | 43 --- ...9k-Check-for-pending-frames-properly.patch | 125 --------- ...THORIZED-event-only-for-station-mode.patch | 33 --- .../315-ath9k-Fix-address-management.patch | 65 ----- ...a-function-to-check-for-an-active-GO.patch | 56 ---- ...heck-for-active-GO-in-mgd_prepare_tx.patch | 134 --------- ...a-helper-function-for-offchannel-NoA.patch | 68 ----- ...h9k-Use-a-helper-function-to-set-NoA.patch | 84 ------ ...th9k-Use-a-helper-function-for-bmiss.patch | 68 ----- .../321-ath9k-Fix-RoC-expiration.patch | 38 --- .../patches/322-ath9k-Send-oneshot-NoA.patch | 85 ------ .../patches/323-ath9k-Fix-HW-scan-abort.patch | 68 ----- .../324-ath9k-Improve-flush-in-mcc-mode.patch | 95 ------- ...-ath9k-Do-not-start-BA-when-scanning.patch | 60 ---- ...ke-support-for-PC-OEM-cards-optional.patch | 259 ------------------ ...move-support-for-UB124-tx-gain-table.patch | 22 -- ...th9k-fix-processing-RXORN-interrupts.patch | 33 --- ...ean-up-debugfs-print-of-reset-causes.patch | 69 ----- ...rdware-after-noise-floor-calibration.patch | 185 ------------- ...run-NF-and-periodic-calibration-at-t.patch | 63 ----- ...nitial-NF-calibration-after-PA-calib.patch | 36 --- ...t-for-endian-swap-of-eeprom-from-pla.patch | 92 ------- ...ow-disabling-bands-via-platform-data.patch | 81 ------ ...om-MAC-address-if-the-EEPROM-address.patch | 39 --- ...Enable-HW-queue-control-only-for-MCC.patch | 145 ---------- ...ion-from-cfg80211-if-unset-in-EEPROM.patch | 56 ---- .../338-ath9k-Update-AR9580-initvals.patch | 162 ----------- .../339-ath9k-Update-AR955x-initvals.patch | 37 --- ...upport-for-driver-tx-power-reporting.patch | 43 --- ...ays-update-value-in-ath9k_cmn_update.patch | 31 --- ...r-rtlwifi-s-bluetooth-coexist-functi.patch | 34 --- ...eee80211_register_hw-from-rtl_usb_pr.patch | 33 --- ...t-Ooops-under-rtl92c_set_fw_rsvdpage.patch | 107 -------- ...eys-for-AP-mode-on-ieee80211_do_stop.patch | 23 -- ...ix-use-after-free-in-defragmentation.patch | 50 ---- .../patches/402-ath_regd_optional.patch | 2 +- .../440-ath5k_channel_bw_debugfs.patch | 4 +- .../522-mac80211_configure_antenna_gain.patch | 22 +- .../patches/543-ath9k_entropy_from_adc.patch | 8 +- .../603-rt2x00-introduce-rt2x00eeprom.patch | 2 +- ...ack_to_board_bin_on_empty_otp_stream.patch | 2 +- 65 files changed, 37 insertions(+), 3205 deletions(-) rename package/kernel/mac80211/patches/{342-ath9k-add-support-for-reporting-tx-power-to-mac80211.patch => 302-ath9k-add-support-for-reporting-tx-power-to-mac80211.patch} (100%) delete mode 100644 package/kernel/mac80211/patches/302-mac80211-trivial-fix-typo-in-starting-baserate-for-r.patch rename package/kernel/mac80211/patches/{343-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch => 303-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch} (85%) delete mode 100644 package/kernel/mac80211/patches/303-ath9k-Use-sta_state-callback.patch delete mode 100644 package/kernel/mac80211/patches/304-ath9k-Enable-multi-channel-properly.patch rename package/kernel/mac80211/patches/{348-ath9k-Fix-RTC_DERIVED_CLK-usage.patch => 304-ath9k-Fix-RTC_DERIVED_CLK-usage.patch} (100%) delete mode 100644 package/kernel/mac80211/patches/305-ath9k-Process-beacons-properly.patch rename package/kernel/mac80211/patches/{349-b43-fix-NULL-pointer-dereference-in-b43_phy_copy.patch => 305-b43-fix-NULL-pointer-dereference-in-b43_phy_copy.patch} (100%) delete mode 100644 package/kernel/mac80211/patches/306-ath9k-Unify-reset-API.patch rename package/kernel/mac80211/patches/{350-ath9k-fix-misc-debugfs-when-not-using-chan-context.patch => 306-ath9k-fix-misc-debugfs-when-not-using-chan-context.patch} (100%) delete mode 100644 package/kernel/mac80211/patches/307-ath9k-Set-ATH_OP_HW_RESET-before-HW-reset.patch rename package/kernel/mac80211/patches/{351-ath9k-fix-regression-in-bssidmask-calculation.patch => 307-ath9k-fix-regression-in-bssidmask-calculation.patch} (100%) delete mode 100644 package/kernel/mac80211/patches/308-ath9k-Disable-beacon-tasklet-during-reset.patch rename package/kernel/mac80211/patches/{353-rt2x00-do-not-align-payload-on-modern-H-W.patch => 308-rt2x00-do-not-align-payload-on-modern-H-W.patch} (100%) delete mode 100644 package/kernel/mac80211/patches/309-ath9k-Clear-NoA-schedule-properly.patch delete mode 100644 package/kernel/mac80211/patches/310-ath9k-Use-configurable-timeout-for-flush.patch delete mode 100644 package/kernel/mac80211/patches/311-ath9k-Fix-MCC-flush-timeout.patch delete mode 100644 package/kernel/mac80211/patches/312-ath9k-Fix-offchannel-flush-timeout.patch delete mode 100644 package/kernel/mac80211/patches/313-ath9k-Check-for-pending-frames-properly.patch delete mode 100644 package/kernel/mac80211/patches/314-ath9k-Send-AUTHORIZED-event-only-for-station-mode.patch delete mode 100644 package/kernel/mac80211/patches/315-ath9k-Fix-address-management.patch delete mode 100644 package/kernel/mac80211/patches/316-ath9k-Add-a-function-to-check-for-an-active-GO.patch delete mode 100644 package/kernel/mac80211/patches/317-ath9k-Check-for-active-GO-in-mgd_prepare_tx.patch delete mode 100644 package/kernel/mac80211/patches/318-ath9k-Use-a-helper-function-for-offchannel-NoA.patch delete mode 100644 package/kernel/mac80211/patches/319-ath9k-Use-a-helper-function-to-set-NoA.patch delete mode 100644 package/kernel/mac80211/patches/320-ath9k-Use-a-helper-function-for-bmiss.patch delete mode 100644 package/kernel/mac80211/patches/321-ath9k-Fix-RoC-expiration.patch delete mode 100644 package/kernel/mac80211/patches/322-ath9k-Send-oneshot-NoA.patch delete mode 100644 package/kernel/mac80211/patches/323-ath9k-Fix-HW-scan-abort.patch delete mode 100644 package/kernel/mac80211/patches/324-ath9k-Improve-flush-in-mcc-mode.patch delete mode 100644 package/kernel/mac80211/patches/325-ath9k-Do-not-start-BA-when-scanning.patch delete mode 100644 package/kernel/mac80211/patches/326-ath9k_hw-make-support-for-PC-OEM-cards-optional.patch delete mode 100644 package/kernel/mac80211/patches/327-ath9k_hw-remove-support-for-UB124-tx-gain-table.patch delete mode 100644 package/kernel/mac80211/patches/328-ath9k-fix-processing-RXORN-interrupts.patch delete mode 100644 package/kernel/mac80211/patches/329-ath9k-clean-up-debugfs-print-of-reset-causes.patch delete mode 100644 package/kernel/mac80211/patches/330-ath9k-restart-hardware-after-noise-floor-calibration.patch delete mode 100644 package/kernel/mac80211/patches/331-ath9k_hw-do-not-run-NF-and-periodic-calibration-at-t.patch delete mode 100644 package/kernel/mac80211/patches/332-ath9k_hw-start-initial-NF-calibration-after-PA-calib.patch delete mode 100644 package/kernel/mac80211/patches/333-ath9k-add-support-for-endian-swap-of-eeprom-from-pla.patch delete mode 100644 package/kernel/mac80211/patches/334-ath9k-allow-disabling-bands-via-platform-data.patch delete mode 100644 package/kernel/mac80211/patches/335-ath9k-use-a-random-MAC-address-if-the-EEPROM-address.patch delete mode 100644 package/kernel/mac80211/patches/336-ath9k-Enable-HW-queue-control-only-for-MCC.patch delete mode 100644 package/kernel/mac80211/patches/337-ath-use-CTL-region-from-cfg80211-if-unset-in-EEPROM.patch delete mode 100644 package/kernel/mac80211/patches/338-ath9k-Update-AR9580-initvals.patch delete mode 100644 package/kernel/mac80211/patches/339-ath9k-Update-AR955x-initvals.patch delete mode 100644 package/kernel/mac80211/patches/340-mac80211-add-support-for-driver-tx-power-reporting.patch delete mode 100644 package/kernel/mac80211/patches/341-ath9k_common-always-update-value-in-ath9k_cmn_update.patch delete mode 100644 package/kernel/mac80211/patches/344-rtl8192cu-Fix-for-rtlwifi-s-bluetooth-coexist-functi.patch delete mode 100644 package/kernel/mac80211/patches/345-rtl8192cu-Call-ieee80211_register_hw-from-rtl_usb_pr.patch delete mode 100644 package/kernel/mac80211/patches/346-rtl8192cu-Prevent-Ooops-under-rtl92c_set_fw_rsvdpage.patch delete mode 100644 package/kernel/mac80211/patches/347-mac80211-flush-keys-for-AP-mode-on-ieee80211_do_stop.patch delete mode 100644 package/kernel/mac80211/patches/352-mac80211-fix-use-after-free-in-defragmentation.patch diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile index ab46a18627..2498b04afa 100644 --- a/package/kernel/mac80211/Makefile +++ b/package/kernel/mac80211/Makefile @@ -10,11 +10,11 @@ include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=mac80211 -PKG_VERSION:=2014-10-08 +PKG_VERSION:=2014-11-04 PKG_RELEASE:=1 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources PKG_BACKPORT_VERSION:= -PKG_MD5SUM:=20e9de70e63fd9649d61d4670a9cc1bd +PKG_MD5SUM:=d0b64853fb78cfd1d6cb639327811e2a PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.bz2 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION) diff --git a/package/kernel/mac80211/patches/008-fix_netdev_unregister.patch b/package/kernel/mac80211/patches/008-fix_netdev_unregister.patch index bd36215e01..fe90b57f15 100644 --- a/package/kernel/mac80211/patches/008-fix_netdev_unregister.patch +++ b/package/kernel/mac80211/patches/008-fix_netdev_unregister.patch @@ -1,6 +1,6 @@ --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c -@@ -1825,6 +1825,11 @@ void ieee80211_remove_interfaces(struct +@@ -1859,6 +1859,11 @@ void ieee80211_remove_interfaces(struct } mutex_unlock(&local->iflist_mtx); unregister_netdevice_many(&unreg_list); diff --git a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch index ddf835847c..cd6e31fd1b 100644 --- a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch +++ b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch @@ -1,6 +1,6 @@ --- a/.local-symbols +++ b/.local-symbols -@@ -416,42 +416,6 @@ USB_CDC_PHONET= +@@ -423,42 +423,6 @@ USB_CDC_PHONET= USB_IPHETH= USB_SIERRA_NET= USB_VL600= diff --git a/package/kernel/mac80211/patches/100-revert_aes_ccm_port.patch b/package/kernel/mac80211/patches/100-revert_aes_ccm_port.patch index a84ce201fb..cb14c0bc38 100644 --- a/package/kernel/mac80211/patches/100-revert_aes_ccm_port.patch +++ b/package/kernel/mac80211/patches/100-revert_aes_ccm_port.patch @@ -246,7 +246,7 @@ struct { --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c -@@ -304,15 +304,22 @@ ieee80211_crypto_tkip_decrypt(struct iee +@@ -302,15 +302,22 @@ ieee80211_crypto_tkip_decrypt(struct iee } @@ -271,7 +271,7 @@ /* * Mask FC: zero subtype b4 b5 b6 (if not mgmt) * Retry, PwrMgt, MoreData; set Protected -@@ -334,21 +341,20 @@ static void ccmp_special_blocks(struct s +@@ -332,21 +339,20 @@ static void ccmp_special_blocks(struct s else qos_tid = 0; @@ -300,7 +300,7 @@ /* AAD (extra authenticate-only data) / masked 802.11 header * FC | A1 | A2 | A3 | SC | [A4] | [QC] */ -@@ -404,8 +410,7 @@ static int ccmp_encrypt_skb(struct ieee8 +@@ -402,8 +408,7 @@ static int ccmp_encrypt_skb(struct ieee8 u8 *pos; u8 pn[6]; u64 pn64; @@ -310,7 +310,7 @@ if (info->control.hw_key && !(info->control.hw_key->flags & IEEE80211_KEY_FLAG_GENERATE_IV) && -@@ -461,9 +466,9 @@ static int ccmp_encrypt_skb(struct ieee8 +@@ -457,9 +462,9 @@ static int ccmp_encrypt_skb(struct ieee8 return 0; pos += IEEE80211_CCMP_HDR_LEN; @@ -323,7 +323,7 @@ return 0; } -@@ -526,16 +531,16 @@ ieee80211_crypto_ccmp_decrypt(struct iee +@@ -522,16 +527,16 @@ ieee80211_crypto_ccmp_decrypt(struct iee } if (!(status->flag & RX_FLAG_DECRYPTED)) { diff --git a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch index d1d9fbd9b1..92687f080d 100644 --- a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch +++ b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch @@ -2,7 +2,7 @@ Used for AP+STA support in OpenWrt - preserve AP mode keys across STA reconnects --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c -@@ -846,7 +846,6 @@ static int ieee80211_stop_ap(struct wiph +@@ -848,7 +848,6 @@ static int ieee80211_stop_ap(struct wiph sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF; __sta_info_flush(sdata, true); diff --git a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch index 41cde32d21..479b409f5f 100644 --- a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch +++ b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch @@ -18,7 +18,7 @@ static int ieee80211_ifa6_changed(struct notifier_block *nb, unsigned long data, void *arg) { -@@ -1038,14 +1038,14 @@ int ieee80211_register_hw(struct ieee802 +@@ -1044,14 +1044,14 @@ int ieee80211_register_hw(struct ieee802 goto fail_pm_qos; } @@ -35,7 +35,7 @@ local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed; result = register_inet6addr_notifier(&local->ifa6_notifier); if (result) -@@ -1054,13 +1054,13 @@ int ieee80211_register_hw(struct ieee802 +@@ -1060,13 +1060,13 @@ int ieee80211_register_hw(struct ieee802 return 0; @@ -52,7 +52,7 @@ fail_ifa: pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY, &local->network_latency_notifier); -@@ -1105,10 +1105,10 @@ void ieee80211_unregister_hw(struct ieee +@@ -1111,10 +1111,10 @@ void ieee80211_unregister_hw(struct ieee pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY, &local->network_latency_notifier); diff --git a/package/kernel/mac80211/patches/210-ap_scan.patch b/package/kernel/mac80211/patches/210-ap_scan.patch index 01d3785976..9e94d00b85 100644 --- a/package/kernel/mac80211/patches/210-ap_scan.patch +++ b/package/kernel/mac80211/patches/210-ap_scan.patch @@ -1,6 +1,6 @@ --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c -@@ -1895,7 +1895,7 @@ static int ieee80211_scan(struct wiphy * +@@ -1947,7 +1947,7 @@ static int ieee80211_scan(struct wiphy * * the frames sent while scanning on other channel will be * lost) */ diff --git a/package/kernel/mac80211/patches/342-ath9k-add-support-for-reporting-tx-power-to-mac80211.patch b/package/kernel/mac80211/patches/302-ath9k-add-support-for-reporting-tx-power-to-mac80211.patch similarity index 100% rename from package/kernel/mac80211/patches/342-ath9k-add-support-for-reporting-tx-power-to-mac80211.patch rename to package/kernel/mac80211/patches/302-ath9k-add-support-for-reporting-tx-power-to-mac80211.patch diff --git a/package/kernel/mac80211/patches/302-mac80211-trivial-fix-typo-in-starting-baserate-for-r.patch b/package/kernel/mac80211/patches/302-mac80211-trivial-fix-typo-in-starting-baserate-for-r.patch deleted file mode 100644 index c4c416d996..0000000000 --- a/package/kernel/mac80211/patches/302-mac80211-trivial-fix-typo-in-starting-baserate-for-r.patch +++ /dev/null @@ -1,20 +0,0 @@ -From: Karl Beldan -Date: Tue, 7 Oct 2014 15:53:38 +0200 -Subject: [PATCH] mac80211/trivial: fix typo in starting baserate for - rts_cts_rate_idx - -Fixes: 5253ffb8 ("mac80211: always pick a basic rate to tx RTS/CTS for pre-HT rates") -Signed-off-by: Karl Beldan ---- - ---- a/net/mac80211/rate.c -+++ b/net/mac80211/rate.c -@@ -448,7 +448,7 @@ static void rate_fixup_ratelist(struct i - */ - if (!(rates[0].flags & IEEE80211_TX_RC_MCS)) { - u32 basic_rates = vif->bss_conf.basic_rates; -- s8 baserate = basic_rates ? ffs(basic_rates - 1) : 0; -+ s8 baserate = basic_rates ? ffs(basic_rates) - 1 : 0; - - rate = &sband->bitrates[rates[0].idx]; - diff --git a/package/kernel/mac80211/patches/343-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch b/package/kernel/mac80211/patches/303-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch similarity index 85% rename from package/kernel/mac80211/patches/343-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch rename to package/kernel/mac80211/patches/303-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch index a9cba1d5ea..96cd78b3f2 100644 --- a/package/kernel/mac80211/patches/343-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch +++ b/package/kernel/mac80211/patches/303-ath10k-add-SURVEY_INFO_IN_USE-for-current-channel-on.patch @@ -1,13 +1,14 @@ From: Felix Fietkau Date: Wed, 22 Oct 2014 18:44:03 +0200 -Subject: [PATCH] ath10k: add SURVEY_INFO_IN_USE for current channel on survey +Subject: [PATCH] ath10k: add SURVEY_INFO_IN_USE for current channel on + survey Signed-off-by: Felix Fietkau --- --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c -@@ -3975,6 +3975,9 @@ static int ath10k_get_survey(struct ieee +@@ -4044,6 +4044,9 @@ static int ath10k_get_survey(struct ieee survey->channel = &sband->channels[idx]; diff --git a/package/kernel/mac80211/patches/303-ath9k-Use-sta_state-callback.patch b/package/kernel/mac80211/patches/303-ath9k-Use-sta_state-callback.patch deleted file mode 100644 index 03f1304e87..0000000000 --- a/package/kernel/mac80211/patches/303-ath9k-Use-sta_state-callback.patch +++ /dev/null @@ -1,55 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:08 +0530 -Subject: [PATCH] ath9k: Use sta_state() callback - -Instead of using the sta_add()/sta_remove() callbacks, -use the sta_state() callback since this gives -more fine-grained control. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -1547,6 +1547,31 @@ static int ath9k_sta_remove(struct ieee8 - return 0; - } - -+static int ath9k_sta_state(struct ieee80211_hw *hw, -+ struct ieee80211_vif *vif, -+ struct ieee80211_sta *sta, -+ enum ieee80211_sta_state old_state, -+ enum ieee80211_sta_state new_state) -+{ -+ struct ath_softc *sc = hw->priv; -+ struct ath_common *common = ath9k_hw_common(sc->sc_ah); -+ int ret = 0; -+ -+ if (old_state == IEEE80211_STA_AUTH && -+ new_state == IEEE80211_STA_ASSOC) { -+ ret = ath9k_sta_add(hw, vif, sta); -+ ath_dbg(common, CONFIG, -+ "Add station: %pM\n", sta->addr); -+ } else if (old_state == IEEE80211_STA_ASSOC && -+ new_state == IEEE80211_STA_AUTH) { -+ ret = ath9k_sta_remove(hw, vif, sta); -+ ath_dbg(common, CONFIG, -+ "Remove station: %pM\n", sta->addr); -+ } -+ -+ return ret; -+} -+ - static void ath9k_sta_set_tx_filter(struct ath_hw *ah, - struct ath_node *an, - bool set) -@@ -2471,8 +2496,7 @@ struct ieee80211_ops ath9k_ops = { - .remove_interface = ath9k_remove_interface, - .config = ath9k_config, - .configure_filter = ath9k_configure_filter, -- .sta_add = ath9k_sta_add, -- .sta_remove = ath9k_sta_remove, -+ .sta_state = ath9k_sta_state, - .sta_notify = ath9k_sta_notify, - .conf_tx = ath9k_conf_tx, - .bss_info_changed = ath9k_bss_info_changed, diff --git a/package/kernel/mac80211/patches/304-ath9k-Enable-multi-channel-properly.patch b/package/kernel/mac80211/patches/304-ath9k-Enable-multi-channel-properly.patch deleted file mode 100644 index e743eb8d83..0000000000 --- a/package/kernel/mac80211/patches/304-ath9k-Enable-multi-channel-properly.patch +++ /dev/null @@ -1,82 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:09 +0530 -Subject: [PATCH] ath9k: Enable multi-channel properly - -In MCC mode, currently the decision to enable -the multi-channel state machine is done -based on the association status if one of -the interfaces assigned to a context is in -station mode. - -This allows the driver to switch to the other -context before the current station is able to -complete the 4-way handshake in case it is -required and this causes problems. - -Instead, enable multi-channel mode when the -station moves to the authorized state. This -disallows an early switch to the other channel. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/ath9k.h -+++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -362,7 +362,7 @@ enum ath_chanctx_event { - ATH_CHANCTX_EVENT_BEACON_SENT, - ATH_CHANCTX_EVENT_TSF_TIMER, - ATH_CHANCTX_EVENT_BEACON_RECEIVED, -- ATH_CHANCTX_EVENT_ASSOC, -+ ATH_CHANCTX_EVENT_AUTHORIZED, - ATH_CHANCTX_EVENT_SWITCH, - ATH_CHANCTX_EVENT_ASSIGN, - ATH_CHANCTX_EVENT_UNASSIGN, ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -171,7 +171,7 @@ static const char *chanctx_event_string( - case_rtn_string(ATH_CHANCTX_EVENT_BEACON_SENT); - case_rtn_string(ATH_CHANCTX_EVENT_TSF_TIMER); - case_rtn_string(ATH_CHANCTX_EVENT_BEACON_RECEIVED); -- case_rtn_string(ATH_CHANCTX_EVENT_ASSOC); -+ case_rtn_string(ATH_CHANCTX_EVENT_AUTHORIZED); - case_rtn_string(ATH_CHANCTX_EVENT_SWITCH); - case_rtn_string(ATH_CHANCTX_EVENT_ASSIGN); - case_rtn_string(ATH_CHANCTX_EVENT_UNASSIGN); -@@ -510,7 +510,7 @@ void ath_chanctx_event(struct ath_softc - - ath_chanctx_setup_timer(sc, tsf_time); - break; -- case ATH_CHANCTX_EVENT_ASSOC: -+ case ATH_CHANCTX_EVENT_AUTHORIZED: - if (sc->sched.state != ATH_CHANCTX_STATE_FORCE_ACTIVE || - avp->chanctx != sc->cur_chan) - break; ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -1569,6 +1569,13 @@ static int ath9k_sta_state(struct ieee80 - "Remove station: %pM\n", sta->addr); - } - -+ if (ath9k_is_chanctx_enabled()) { -+ if (old_state == IEEE80211_STA_ASSOC && -+ new_state == IEEE80211_STA_AUTHORIZED) -+ ath_chanctx_event(sc, vif, -+ ATH_CHANCTX_EVENT_AUTHORIZED); -+ } -+ - return ret; - } - -@@ -1761,12 +1768,6 @@ static void ath9k_bss_info_changed(struc - avp->assoc = bss_conf->assoc; - - ath9k_calculate_summary_state(sc, avp->chanctx); -- -- if (ath9k_is_chanctx_enabled()) { -- if (bss_conf->assoc) -- ath_chanctx_event(sc, vif, -- ATH_CHANCTX_EVENT_ASSOC); -- } - } - - if (changed & BSS_CHANGED_IBSS) { diff --git a/package/kernel/mac80211/patches/348-ath9k-Fix-RTC_DERIVED_CLK-usage.patch b/package/kernel/mac80211/patches/304-ath9k-Fix-RTC_DERIVED_CLK-usage.patch similarity index 100% rename from package/kernel/mac80211/patches/348-ath9k-Fix-RTC_DERIVED_CLK-usage.patch rename to package/kernel/mac80211/patches/304-ath9k-Fix-RTC_DERIVED_CLK-usage.patch diff --git a/package/kernel/mac80211/patches/305-ath9k-Process-beacons-properly.patch b/package/kernel/mac80211/patches/305-ath9k-Process-beacons-properly.patch deleted file mode 100644 index 36da40402a..0000000000 --- a/package/kernel/mac80211/patches/305-ath9k-Process-beacons-properly.patch +++ /dev/null @@ -1,37 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:10 +0530 -Subject: [PATCH] ath9k: Process beacons properly - -When the current operating channel context has -been marked as ATH_CHANCTX_STATE_FORCE_ACTIVE, -do not process beacons that might be received, -since we have to wait for the station to become -authorized. - -Also, since the cached TSF value will be zero -initially do not rearm the timer in this -case when a beacon is received, since it results -in spurious values. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -495,10 +495,15 @@ void ath_chanctx_event(struct ath_softc - sc->cur_chan == &sc->offchannel.chan) - break; - -- ath_chanctx_adjust_tbtt_delta(sc); - sc->sched.beacon_pending = false; - sc->sched.beacon_miss = 0; - -+ if (sc->sched.state == ATH_CHANCTX_STATE_FORCE_ACTIVE || -+ !sc->cur_chan->tsf_val) -+ break; -+ -+ ath_chanctx_adjust_tbtt_delta(sc); -+ - /* TSF time might have been updated by the incoming beacon, - * need update the channel switch timer to reflect the change. - */ diff --git a/package/kernel/mac80211/patches/349-b43-fix-NULL-pointer-dereference-in-b43_phy_copy.patch b/package/kernel/mac80211/patches/305-b43-fix-NULL-pointer-dereference-in-b43_phy_copy.patch similarity index 100% rename from package/kernel/mac80211/patches/349-b43-fix-NULL-pointer-dereference-in-b43_phy_copy.patch rename to package/kernel/mac80211/patches/305-b43-fix-NULL-pointer-dereference-in-b43_phy_copy.patch diff --git a/package/kernel/mac80211/patches/306-ath9k-Unify-reset-API.patch b/package/kernel/mac80211/patches/306-ath9k-Unify-reset-API.patch deleted file mode 100644 index 6460a32802..0000000000 --- a/package/kernel/mac80211/patches/306-ath9k-Unify-reset-API.patch +++ /dev/null @@ -1,108 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:11 +0530 -Subject: [PATCH] ath9k: Unify reset API - -Instead of having ath_reset_internal() and ath_reset() -as two separate calls to perform a HW reset, have -one function. This makes sure that the behavior will -be the same at all callsites. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/ath9k.h -+++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -540,7 +540,6 @@ static inline void ath_chanctx_check_act - - #endif /* CPTCFG_ATH9K_CHANNEL_CONTEXT */ - --int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan); - void ath_startrecv(struct ath_softc *sc); - bool ath_stoprecv(struct ath_softc *sc); - u32 ath_calcrxfilter(struct ath_softc *sc); -@@ -1069,7 +1068,7 @@ void ath9k_tasklet(unsigned long data); - int ath_cabq_update(struct ath_softc *); - u8 ath9k_parse_mpdudensity(u8 mpdudensity); - irqreturn_t ath_isr(int irq, void *dev); --int ath_reset(struct ath_softc *sc); -+int ath_reset(struct ath_softc *sc, struct ath9k_channel *hchan); - void ath_cancel_work(struct ath_softc *sc); - void ath_restart_work(struct ath_softc *sc); - int ath9k_init_device(u16 devid, struct ath_softc *sc, ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -66,7 +66,7 @@ static int ath_set_channel(struct ath_so - } - - hchan = &sc->sc_ah->channels[pos]; -- r = ath_reset_internal(sc, hchan); -+ r = ath_reset(sc, hchan); - if (r) - return r; - ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -270,7 +270,7 @@ static bool ath_complete_reset(struct at - return true; - } - --int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan) -+static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan) - { - struct ath_hw *ah = sc->sc_ah; - struct ath_common *common = ath9k_hw_common(ah); -@@ -598,12 +598,12 @@ chip_reset: - #undef SCHED_INTR - } - --int ath_reset(struct ath_softc *sc) -+int ath_reset(struct ath_softc *sc, struct ath9k_channel *hchan) - { - int r; - - ath9k_ps_wakeup(sc); -- r = ath_reset_internal(sc, NULL); -+ r = ath_reset_internal(sc, hchan); - ath9k_ps_restore(sc); - - return r; -@@ -623,7 +623,9 @@ void ath_reset_work(struct work_struct * - { - struct ath_softc *sc = container_of(work, struct ath_softc, hw_reset_work); - -- ath_reset(sc); -+ ath9k_ps_wakeup(sc); -+ ath_reset_internal(sc, NULL); -+ ath9k_ps_restore(sc); - } - - /**********************/ -@@ -2044,7 +2046,7 @@ void __ath9k_flush(struct ieee80211_hw * - spin_unlock_bh(&sc->sc_pcu_lock); - - if (!drain_txq) -- ath_reset(sc); -+ ath_reset(sc, NULL); - - ath9k_ps_restore(sc); - } ---- a/drivers/net/wireless/ath/ath9k/tx99.c -+++ b/drivers/net/wireless/ath/ath9k/tx99.c -@@ -99,7 +99,7 @@ static struct sk_buff *ath9k_build_tx99_ - - static void ath9k_tx99_deinit(struct ath_softc *sc) - { -- ath_reset(sc); -+ ath_reset(sc, NULL); - - ath9k_ps_wakeup(sc); - ath9k_tx99_stop(sc); -@@ -127,7 +127,7 @@ static int ath9k_tx99_init(struct ath_so - memset(&txctl, 0, sizeof(txctl)); - txctl.txq = sc->tx.txq_map[IEEE80211_AC_VO]; - -- ath_reset(sc); -+ ath_reset(sc, NULL); - - ath9k_ps_wakeup(sc); - diff --git a/package/kernel/mac80211/patches/350-ath9k-fix-misc-debugfs-when-not-using-chan-context.patch b/package/kernel/mac80211/patches/306-ath9k-fix-misc-debugfs-when-not-using-chan-context.patch similarity index 100% rename from package/kernel/mac80211/patches/350-ath9k-fix-misc-debugfs-when-not-using-chan-context.patch rename to package/kernel/mac80211/patches/306-ath9k-fix-misc-debugfs-when-not-using-chan-context.patch diff --git a/package/kernel/mac80211/patches/307-ath9k-Set-ATH_OP_HW_RESET-before-HW-reset.patch b/package/kernel/mac80211/patches/307-ath9k-Set-ATH_OP_HW_RESET-before-HW-reset.patch deleted file mode 100644 index 75a2ab5878..0000000000 --- a/package/kernel/mac80211/patches/307-ath9k-Set-ATH_OP_HW_RESET-before-HW-reset.patch +++ /dev/null @@ -1,55 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:12 +0530 -Subject: [PATCH] ath9k: Set ATH_OP_HW_RESET before HW reset - -When a HW reset is done, the interrupt tasklet is -disabled before ISRs are disabled in the HW. This -allows a small window where the HW can still generate -interrupts. Since the tasklet is disabled and not killed, -it is not scheduled but deferred for execution at a later -time. - -This happens because ATH_OP_HW_RESET is not set when ath_reset() -is called. When the hw_reset_work workqueue is used, this -problem doesn't arise because ATH_OP_HW_RESET is set -and the ISR bails out. - -Set ATH_OP_HW_RESET properly in ath_reset() to avoid -this race - all the ath_reset_internal() callers have -been converted to use ath_reset() in the previous patch. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -598,10 +598,17 @@ chip_reset: - #undef SCHED_INTR - } - -+/* -+ * This function is called when a HW reset cannot be deferred -+ * and has to be immediate. -+ */ - int ath_reset(struct ath_softc *sc, struct ath9k_channel *hchan) - { -+ struct ath_common *common = ath9k_hw_common(sc->sc_ah); - int r; - -+ set_bit(ATH_OP_HW_RESET, &common->op_flags); -+ - ath9k_ps_wakeup(sc); - r = ath_reset_internal(sc, hchan); - ath9k_ps_restore(sc); -@@ -609,6 +616,11 @@ int ath_reset(struct ath_softc *sc, stru - return r; - } - -+/* -+ * When a HW reset can be deferred, it is added to the -+ * hw_reset_work workqueue, but we set ATH_OP_HW_RESET before -+ * queueing. -+ */ - void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type) - { - struct ath_common *common = ath9k_hw_common(sc->sc_ah); diff --git a/package/kernel/mac80211/patches/351-ath9k-fix-regression-in-bssidmask-calculation.patch b/package/kernel/mac80211/patches/307-ath9k-fix-regression-in-bssidmask-calculation.patch similarity index 100% rename from package/kernel/mac80211/patches/351-ath9k-fix-regression-in-bssidmask-calculation.patch rename to package/kernel/mac80211/patches/307-ath9k-fix-regression-in-bssidmask-calculation.patch diff --git a/package/kernel/mac80211/patches/308-ath9k-Disable-beacon-tasklet-during-reset.patch b/package/kernel/mac80211/patches/308-ath9k-Disable-beacon-tasklet-during-reset.patch deleted file mode 100644 index faf282dcde..0000000000 --- a/package/kernel/mac80211/patches/308-ath9k-Disable-beacon-tasklet-during-reset.patch +++ /dev/null @@ -1,29 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:13 +0530 -Subject: [PATCH] ath9k: Disable beacon tasklet during reset - -When a chip reset is done, all running timers, -tasklets etc. are stopped but the beacon tasklet -is left running. Fix this. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -281,6 +281,7 @@ static int ath_reset_internal(struct ath - __ath_cancel_work(sc); - - tasklet_disable(&sc->intr_tq); -+ tasklet_disable(&sc->bcon_tasklet); - spin_lock_bh(&sc->sc_pcu_lock); - - if (!sc->cur_chan->offchannel) { -@@ -326,6 +327,7 @@ static int ath_reset_internal(struct ath - - out: - spin_unlock_bh(&sc->sc_pcu_lock); -+ tasklet_enable(&sc->bcon_tasklet); - tasklet_enable(&sc->intr_tq); - - return r; diff --git a/package/kernel/mac80211/patches/353-rt2x00-do-not-align-payload-on-modern-H-W.patch b/package/kernel/mac80211/patches/308-rt2x00-do-not-align-payload-on-modern-H-W.patch similarity index 100% rename from package/kernel/mac80211/patches/353-rt2x00-do-not-align-payload-on-modern-H-W.patch rename to package/kernel/mac80211/patches/308-rt2x00-do-not-align-payload-on-modern-H-W.patch diff --git a/package/kernel/mac80211/patches/309-ath9k-Clear-NoA-schedule-properly.patch b/package/kernel/mac80211/patches/309-ath9k-Clear-NoA-schedule-properly.patch deleted file mode 100644 index 6089d60a40..0000000000 --- a/package/kernel/mac80211/patches/309-ath9k-Clear-NoA-schedule-properly.patch +++ /dev/null @@ -1,36 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:14 +0530 -Subject: [PATCH] ath9k: Clear NoA schedule properly - -When an active context transitions to inactive -state, the NoA schedule needs to be removed -for the context that has beaconing enabled. -Not doing this will affect p2p clients. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -356,6 +356,21 @@ void ath_chanctx_event(struct ath_softc - "Move chanctx state from WAIT_FOR_TIMER to WAIT_FOR_BEACON\n"); - } - -+ /* -+ * When a context becomes inactive, for example, -+ * disassociation of a station context, the NoA -+ * attribute needs to be removed from subsequent -+ * beacons. -+ */ -+ if (!ctx->active && avp->noa_duration && -+ sc->sched.state != ATH_CHANCTX_STATE_WAIT_FOR_BEACON) { -+ avp->noa_duration = 0; -+ avp->periodic_noa = false; -+ -+ ath_dbg(common, CHAN_CTX, -+ "Clearing NoA schedule\n"); -+ } -+ - if (sc->sched.state != ATH_CHANCTX_STATE_WAIT_FOR_BEACON) - break; - diff --git a/package/kernel/mac80211/patches/310-ath9k-Use-configurable-timeout-for-flush.patch b/package/kernel/mac80211/patches/310-ath9k-Use-configurable-timeout-for-flush.patch deleted file mode 100644 index 3a2c41be19..0000000000 --- a/package/kernel/mac80211/patches/310-ath9k-Use-configurable-timeout-for-flush.patch +++ /dev/null @@ -1,57 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:15 +0530 -Subject: [PATCH] ath9k: Use configurable timeout for flush - -The timeout value for flushing the TX queues -is hardcoded at 200ms right now. Use a channel -context-specific value instead to allow adjustments -to the timeout in case MCC is enabled. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/ath9k.h -+++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -345,6 +345,7 @@ struct ath_chanctx { - u64 tsf_val; - u32 last_beacon; - -+ int flush_timeout; - u16 txpower; - bool offchannel; - bool stopped; ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -117,6 +117,7 @@ void ath_chanctx_init(struct ath_softc * - cfg80211_chandef_create(&ctx->chandef, chan, NL80211_CHAN_HT20); - INIT_LIST_HEAD(&ctx->vifs); - ctx->txpower = ATH_TXPOWER_MAX; -+ ctx->flush_timeout = HZ / 5; /* 200ms */ - for (j = 0; j < ARRAY_SIZE(ctx->acq); j++) - INIT_LIST_HEAD(&ctx->acq[j]); - } ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -2034,7 +2034,7 @@ void __ath9k_flush(struct ieee80211_hw * - struct ath_softc *sc = hw->priv; - struct ath_hw *ah = sc->sc_ah; - struct ath_common *common = ath9k_hw_common(ah); -- int timeout = HZ / 5; /* 200 ms */ -+ int timeout; - bool drain_txq; - - cancel_delayed_work_sync(&sc->tx_complete_work); -@@ -2049,6 +2049,13 @@ void __ath9k_flush(struct ieee80211_hw * - return; - } - -+ spin_lock_bh(&sc->chan_lock); -+ timeout = sc->cur_chan->flush_timeout; -+ spin_unlock_bh(&sc->chan_lock); -+ -+ ath_dbg(common, CHAN_CTX, -+ "Flush timeout: %d\n", jiffies_to_msecs(timeout)); -+ - if (wait_event_timeout(sc->tx_wait, !ath9k_has_tx_pending(sc), - timeout) > 0) - drop = false; diff --git a/package/kernel/mac80211/patches/311-ath9k-Fix-MCC-flush-timeout.patch b/package/kernel/mac80211/patches/311-ath9k-Fix-MCC-flush-timeout.patch deleted file mode 100644 index 020ac1afbc..0000000000 --- a/package/kernel/mac80211/patches/311-ath9k-Fix-MCC-flush-timeout.patch +++ /dev/null @@ -1,68 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:16 +0530 -Subject: [PATCH] ath9k: Fix MCC flush timeout - -In MCC mode, the duration for a channel context -is half the beacon interval and having a large -flush timeout will adversely affect GO operation, -since the default value of 200ms will overshoot -the advertised NoA absence duration. - -The scheduler initiates a channel context switch -only when the slot duration for the current -context expires, so there is no possibility of -having a fixed timeout for flush. - -Since the channel_switch_time is added to the -absence duration when the GO sets up the NoA -attribute, this is the maximum time that we -have to flush the TX queues. The duration is very -small, but we don't have a choice in MCC mode. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -199,6 +199,7 @@ static const char *chanctx_state_string( - void ath_chanctx_check_active(struct ath_softc *sc, struct ath_chanctx *ctx) - { - struct ath_common *common = ath9k_hw_common(sc->sc_ah); -+ struct ath_chanctx *ictx; - struct ath_vif *avp; - bool active = false; - u8 n_active = 0; -@@ -206,6 +207,8 @@ void ath_chanctx_check_active(struct ath - if (!ctx) - return; - -+ ictx = ctx; -+ - list_for_each_entry(avp, &ctx->vifs, list) { - struct ieee80211_vif *vif = avp->vif; - -@@ -228,12 +231,23 @@ void ath_chanctx_check_active(struct ath - n_active++; - } - -+ spin_lock_bh(&sc->chan_lock); -+ - if (n_active <= 1) { -+ ictx->flush_timeout = HZ / 5; - clear_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags); -+ spin_unlock_bh(&sc->chan_lock); - return; - } -- if (test_and_set_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags)) -+ -+ ictx->flush_timeout = usecs_to_jiffies(sc->sched.channel_switch_time); -+ -+ if (test_and_set_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags)) { -+ spin_unlock_bh(&sc->chan_lock); - return; -+ } -+ -+ spin_unlock_bh(&sc->chan_lock); - - if (ath9k_is_chanctx_enabled()) { - ath_chanctx_event(sc, NULL, diff --git a/package/kernel/mac80211/patches/312-ath9k-Fix-offchannel-flush-timeout.patch b/package/kernel/mac80211/patches/312-ath9k-Fix-offchannel-flush-timeout.patch deleted file mode 100644 index 0a4257d8a1..0000000000 --- a/package/kernel/mac80211/patches/312-ath9k-Fix-offchannel-flush-timeout.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:17 +0530 -Subject: [PATCH] ath9k: Fix offchannel flush timeout - -An offchannel operation also needs to have -a flush timeout that doesn't exceed the NoA -absence duration of a GO context, so use -channel_switch_time. The first offchannel -operation is set a flush timeout of 10ms since -channel_switch_time will be zero. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -207,6 +207,26 @@ void ath_chanctx_check_active(struct ath - if (!ctx) - return; - -+ if (ctx == &sc->offchannel.chan) { -+ spin_lock_bh(&sc->chan_lock); -+ -+ if (likely(sc->sched.channel_switch_time)) -+ ctx->flush_timeout = -+ usecs_to_jiffies(sc->sched.channel_switch_time); -+ else -+ ctx->flush_timeout = -+ msecs_to_jiffies(10); -+ -+ spin_unlock_bh(&sc->chan_lock); -+ -+ /* -+ * There is no need to iterate over the -+ * active/assigned channel contexts if -+ * the current context is offchannel. -+ */ -+ return; -+ } -+ - ictx = ctx; - - list_for_each_entry(avp, &ctx->vifs, list) { diff --git a/package/kernel/mac80211/patches/313-ath9k-Check-for-pending-frames-properly.patch b/package/kernel/mac80211/patches/313-ath9k-Check-for-pending-frames-properly.patch deleted file mode 100644 index c1d8791b9d..0000000000 --- a/package/kernel/mac80211/patches/313-ath9k-Check-for-pending-frames-properly.patch +++ /dev/null @@ -1,125 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:18 +0530 -Subject: [PATCH] ath9k: Check for pending frames properly - -Pending frames in the driver can be present -either in the HW queues or SW. ath9k_has_pending_frames() -currently checks for the HW queues first and then -checks if any ACs are queued in the driver. - -In MCC mode, we need to check the HW queues alone, since -the SW queues are just marked as 'stopped' - they will -be processed in the next context switch. But since we -don't differentiate this now, mention whether we want -to check if there are frames in the SW queues. - -* The flush() callback checks both HW and SW queues. -* The tx_frames_pending() callback does the same. -* The call to __ath9k_flush() in MCC mode checks HW queues alone. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/ath9k.h -+++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -715,7 +715,8 @@ int ath_update_survey_stats(struct ath_s - void ath_update_survey_nf(struct ath_softc *sc, int channel); - void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type); - void ath_ps_full_sleep(unsigned long data); --void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop); -+void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop, -+ bool sw_pending); - - /**********/ - /* BTCOEX */ ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -1137,10 +1137,11 @@ void ath_chanctx_set_next(struct ath_sof - ath9k_chanctx_stop_queues(sc, sc->cur_chan); - queues_stopped = true; - -- __ath9k_flush(sc->hw, ~0, true); -+ __ath9k_flush(sc->hw, ~0, true, false); - - if (ath_chanctx_send_ps_frame(sc, true)) -- __ath9k_flush(sc->hw, BIT(IEEE80211_AC_VO), false); -+ __ath9k_flush(sc->hw, BIT(IEEE80211_AC_VO), -+ false, false); - - send_ps = true; - spin_lock_bh(&sc->chan_lock); ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -54,7 +54,8 @@ u8 ath9k_parse_mpdudensity(u8 mpdudensit - } - } - --static bool ath9k_has_pending_frames(struct ath_softc *sc, struct ath_txq *txq) -+static bool ath9k_has_pending_frames(struct ath_softc *sc, struct ath_txq *txq, -+ bool sw_pending) - { - bool pending = false; - -@@ -65,6 +66,9 @@ static bool ath9k_has_pending_frames(str - goto out; - } - -+ if (!sw_pending) -+ goto out; -+ - if (txq->mac80211_qnum >= 0) { - struct list_head *list; - -@@ -2003,7 +2007,8 @@ static void ath9k_set_coverage_class(str - mutex_unlock(&sc->mutex); - } - --static bool ath9k_has_tx_pending(struct ath_softc *sc) -+static bool ath9k_has_tx_pending(struct ath_softc *sc, -+ bool sw_pending) - { - int i, npend = 0; - -@@ -2011,7 +2016,8 @@ static bool ath9k_has_tx_pending(struct - if (!ATH_TXQ_SETUP(sc, i)) - continue; - -- npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i]); -+ npend = ath9k_has_pending_frames(sc, &sc->tx.txq[i], -+ sw_pending); - if (npend) - break; - } -@@ -2025,11 +2031,12 @@ static void ath9k_flush(struct ieee80211 - struct ath_softc *sc = hw->priv; - - mutex_lock(&sc->mutex); -- __ath9k_flush(hw, queues, drop); -+ __ath9k_flush(hw, queues, drop, true); - mutex_unlock(&sc->mutex); - } - --void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop) -+void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop, -+ bool sw_pending) - { - struct ath_softc *sc = hw->priv; - struct ath_hw *ah = sc->sc_ah; -@@ -2056,7 +2063,7 @@ void __ath9k_flush(struct ieee80211_hw * - ath_dbg(common, CHAN_CTX, - "Flush timeout: %d\n", jiffies_to_msecs(timeout)); - -- if (wait_event_timeout(sc->tx_wait, !ath9k_has_tx_pending(sc), -+ if (wait_event_timeout(sc->tx_wait, !ath9k_has_tx_pending(sc, sw_pending), - timeout) > 0) - drop = false; - -@@ -2079,7 +2086,7 @@ static bool ath9k_tx_frames_pending(stru - { - struct ath_softc *sc = hw->priv; - -- return ath9k_has_tx_pending(sc); -+ return ath9k_has_tx_pending(sc, true); - } - - static int ath9k_tx_last_beacon(struct ieee80211_hw *hw) diff --git a/package/kernel/mac80211/patches/314-ath9k-Send-AUTHORIZED-event-only-for-station-mode.patch b/package/kernel/mac80211/patches/314-ath9k-Send-AUTHORIZED-event-only-for-station-mode.patch deleted file mode 100644 index 4c5644271d..0000000000 --- a/package/kernel/mac80211/patches/314-ath9k-Send-AUTHORIZED-event-only-for-station-mode.patch +++ /dev/null @@ -1,33 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:19 +0530 -Subject: [PATCH] ath9k: Send AUTHORIZED event only for station mode - -ATH_CHANCTX_EVENT_AUTHORIZED is required to trigger -the MCC scheduler when a station interface becomes -authorized. But, since the driver gets station state -notifications when the current operating mode is AP -too, make sure that we send ATH_CHANCTX_EVENT_AUTHORIZED -only when the interface is in station mode. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -1590,10 +1590,12 @@ static int ath9k_sta_state(struct ieee80 - } - - if (ath9k_is_chanctx_enabled()) { -- if (old_state == IEEE80211_STA_ASSOC && -- new_state == IEEE80211_STA_AUTHORIZED) -- ath_chanctx_event(sc, vif, -- ATH_CHANCTX_EVENT_AUTHORIZED); -+ if (vif->type == NL80211_IFTYPE_STATION) { -+ if (old_state == IEEE80211_STA_ASSOC && -+ new_state == IEEE80211_STA_AUTHORIZED) -+ ath_chanctx_event(sc, vif, -+ ATH_CHANCTX_EVENT_AUTHORIZED); -+ } - } - - return ret; diff --git a/package/kernel/mac80211/patches/315-ath9k-Fix-address-management.patch b/package/kernel/mac80211/patches/315-ath9k-Fix-address-management.patch deleted file mode 100644 index a407861e23..0000000000 --- a/package/kernel/mac80211/patches/315-ath9k-Fix-address-management.patch +++ /dev/null @@ -1,65 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:20 +0530 -Subject: [PATCH] ath9k: Fix address management - -Since both the arguments need to satisfy -the alignment requirements of ether_addr_copy(), -use memcpy() in cases where there will be no -big performance benefit and make sure that -ether_addr_copy() calls use properly aligned -arguments. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath.h -+++ b/drivers/net/wireless/ath/ath.h -@@ -147,7 +147,7 @@ struct ath_common { - u16 cachelsz; - u16 curaid; - u8 macaddr[ETH_ALEN]; -- u8 curbssid[ETH_ALEN]; -+ u8 curbssid[ETH_ALEN] __aligned(2); - u8 bssidmask[ETH_ALEN]; - - u32 rx_bufsize; ---- a/drivers/net/wireless/ath/ath9k/ath9k.h -+++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -595,7 +595,7 @@ struct ath_vif { - u16 seq_no; - - /* BSS info */ -- u8 bssid[ETH_ALEN]; -+ u8 bssid[ETH_ALEN] __aligned(2); - u16 aid; - bool assoc; - ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -1057,7 +1057,7 @@ static void ath9k_set_offchannel_state(s - - eth_zero_addr(common->curbssid); - eth_broadcast_addr(common->bssidmask); -- ether_addr_copy(common->macaddr, vif->addr); -+ memcpy(common->macaddr, vif->addr, ETH_ALEN); - common->curaid = 0; - ah->opmode = vif->type; - ah->imask &= ~ATH9K_INT_SWBA; -@@ -1098,7 +1098,7 @@ void ath9k_calculate_summary_state(struc - ath9k_calculate_iter_data(sc, ctx, &iter_data); - - if (iter_data.has_hw_macaddr) -- ether_addr_copy(common->macaddr, iter_data.hw_macaddr); -+ memcpy(common->macaddr, iter_data.hw_macaddr, ETH_ALEN); - - memcpy(common->bssidmask, iter_data.mask, ETH_ALEN); - ath_hw_setbssidmask(common); -@@ -1785,7 +1785,7 @@ static void ath9k_bss_info_changed(struc - ath_dbg(common, CONFIG, "BSSID %pM Changed ASSOC %d\n", - bss_conf->bssid, bss_conf->assoc); - -- ether_addr_copy(avp->bssid, bss_conf->bssid); -+ memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN); - avp->aid = bss_conf->aid; - avp->assoc = bss_conf->assoc; - diff --git a/package/kernel/mac80211/patches/316-ath9k-Add-a-function-to-check-for-an-active-GO.patch b/package/kernel/mac80211/patches/316-ath9k-Add-a-function-to-check-for-an-active-GO.patch deleted file mode 100644 index 80b919ee24..0000000000 --- a/package/kernel/mac80211/patches/316-ath9k-Add-a-function-to-check-for-an-active-GO.patch +++ /dev/null @@ -1,56 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:21 +0530 -Subject: [PATCH] ath9k: Add a function to check for an active GO - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/ath9k.h -+++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -469,6 +469,7 @@ void ath_chanctx_set_next(struct ath_sof - void ath_offchannel_next(struct ath_softc *sc); - void ath_scan_complete(struct ath_softc *sc, bool abort); - void ath_roc_complete(struct ath_softc *sc, bool abort); -+struct ath_chanctx* ath_is_go_chanctx_present(struct ath_softc *sc); - - #else - ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -146,6 +146,36 @@ void ath_chanctx_set_channel(struct ath_ - - #ifdef CPTCFG_ATH9K_CHANNEL_CONTEXT - -+/*************/ -+/* Utilities */ -+/*************/ -+ -+struct ath_chanctx* ath_is_go_chanctx_present(struct ath_softc *sc) -+{ -+ struct ath_chanctx *ctx; -+ struct ath_vif *avp; -+ struct ieee80211_vif *vif; -+ -+ spin_lock_bh(&sc->chan_lock); -+ -+ ath_for_each_chanctx(sc, ctx) { -+ if (!ctx->active) -+ continue; -+ -+ list_for_each_entry(avp, &ctx->vifs, list) { -+ vif = avp->vif; -+ -+ if (ieee80211_vif_type_p2p(vif) == NL80211_IFTYPE_P2P_GO) { -+ spin_unlock_bh(&sc->chan_lock); -+ return ctx; -+ } -+ } -+ } -+ -+ spin_unlock_bh(&sc->chan_lock); -+ return NULL; -+} -+ - /**********************************************************/ - /* Functions to handle the channel context state machine. */ - /**********************************************************/ diff --git a/package/kernel/mac80211/patches/317-ath9k-Check-for-active-GO-in-mgd_prepare_tx.patch b/package/kernel/mac80211/patches/317-ath9k-Check-for-active-GO-in-mgd_prepare_tx.patch deleted file mode 100644 index 6e9aa1f2a7..0000000000 --- a/package/kernel/mac80211/patches/317-ath9k-Check-for-active-GO-in-mgd_prepare_tx.patch +++ /dev/null @@ -1,134 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:22 +0530 -Subject: [PATCH] ath9k: Check for active GO in mgd_prepare_tx() - -If a GO interface is active when we receive a -mgd_prepare_tx() call, then we need to send -out a new NoA before switching to a new context. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/ath9k.h -+++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -385,6 +385,7 @@ struct ath_chanctx_sched { - bool wait_switch; - bool force_noa_update; - bool extend_absence; -+ bool mgd_prepare_tx; - enum ath_chanctx_state state; - u8 beacon_miss; - -@@ -977,6 +978,7 @@ struct ath_softc { - struct ath_chanctx_sched sched; - struct ath_offchannel offchannel; - struct ath_chanctx *next_chan; -+ struct completion go_beacon; - #endif - - unsigned long driver_data; ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -421,6 +421,9 @@ void ath_chanctx_event(struct ath_softc - "Move chanctx state from WAIT_FOR_TIMER to WAIT_FOR_BEACON\n"); - } - -+ if (sc->sched.mgd_prepare_tx) -+ sc->sched.state = ATH_CHANCTX_STATE_WAIT_FOR_BEACON; -+ - /* - * When a context becomes inactive, for example, - * disassociation of a station context, the NoA -@@ -547,6 +550,15 @@ void ath_chanctx_event(struct ath_softc - } - - sc->sched.beacon_pending = false; -+ -+ if (sc->sched.mgd_prepare_tx) { -+ sc->sched.mgd_prepare_tx = false; -+ complete(&sc->go_beacon); -+ ath_dbg(common, CHAN_CTX, -+ "Beacon sent, complete go_beacon\n"); -+ break; -+ } -+ - if (sc->sched.state != ATH_CHANCTX_STATE_WAIT_FOR_BEACON) - break; - -@@ -1263,6 +1275,8 @@ void ath9k_init_channel_context(struct a - (unsigned long)sc); - setup_timer(&sc->sched.timer, ath_chanctx_timer, - (unsigned long)sc); -+ -+ init_completion(&sc->go_beacon); - } - - void ath9k_deinit_channel_context(struct ath_softc *sc) ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -2474,7 +2474,11 @@ static void ath9k_mgd_prepare_tx(struct - struct ath_softc *sc = hw->priv; - struct ath_common *common = ath9k_hw_common(sc->sc_ah); - struct ath_vif *avp = (struct ath_vif *) vif->drv_priv; -+ struct ath_beacon_config *cur_conf; -+ struct ath_chanctx *go_ctx; -+ unsigned long timeout; - bool changed = false; -+ u32 beacon_int; - - if (!test_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags)) - return; -@@ -2485,19 +2489,46 @@ static void ath9k_mgd_prepare_tx(struct - mutex_lock(&sc->mutex); - - spin_lock_bh(&sc->chan_lock); -- if (sc->next_chan || (sc->cur_chan != avp->chanctx)) { -- sc->next_chan = avp->chanctx; -+ if (sc->next_chan || (sc->cur_chan != avp->chanctx)) - changed = true; -+ spin_unlock_bh(&sc->chan_lock); -+ -+ if (!changed) -+ goto out; -+ -+ go_ctx = ath_is_go_chanctx_present(sc); -+ -+ if (go_ctx) { -+ /* -+ * Wait till the GO interface gets a chance -+ * to send out an NoA. -+ */ -+ spin_lock_bh(&sc->chan_lock); -+ sc->sched.mgd_prepare_tx = true; -+ cur_conf = &go_ctx->beacon; -+ beacon_int = TU_TO_USEC(cur_conf->beacon_interval); -+ spin_unlock_bh(&sc->chan_lock); -+ -+ timeout = usecs_to_jiffies(beacon_int); -+ init_completion(&sc->go_beacon); -+ -+ if (wait_for_completion_timeout(&sc->go_beacon, -+ timeout) == 0) -+ ath_dbg(common, CHAN_CTX, -+ "Failed to send new NoA\n"); - } -+ - ath_dbg(common, CHAN_CTX, -- "%s: Set chanctx state to FORCE_ACTIVE, changed: %d\n", -- __func__, changed); -+ "%s: Set chanctx state to FORCE_ACTIVE for vif: %pM\n", -+ __func__, vif->addr); -+ -+ spin_lock_bh(&sc->chan_lock); -+ sc->next_chan = avp->chanctx; - sc->sched.state = ATH_CHANCTX_STATE_FORCE_ACTIVE; - spin_unlock_bh(&sc->chan_lock); - -- if (changed) -- ath_chanctx_set_next(sc, true); -- -+ ath_chanctx_set_next(sc, true); -+out: - mutex_unlock(&sc->mutex); - } - diff --git a/package/kernel/mac80211/patches/318-ath9k-Use-a-helper-function-for-offchannel-NoA.patch b/package/kernel/mac80211/patches/318-ath9k-Use-a-helper-function-for-offchannel-NoA.patch deleted file mode 100644 index e51e2f84f5..0000000000 --- a/package/kernel/mac80211/patches/318-ath9k-Use-a-helper-function-for-offchannel-NoA.patch +++ /dev/null @@ -1,68 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:23 +0530 -Subject: [PATCH] ath9k: Use a helper function for offchannel NoA - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -366,6 +366,32 @@ static void ath_chanctx_setup_timer(stru - "Setup chanctx timer with timeout: %d ms\n", jiffies_to_msecs(tsf_time)); - } - -+static void ath_chanctx_offchannel_noa(struct ath_softc *sc, -+ struct ath_chanctx *ctx, -+ struct ath_vif *avp, -+ u32 tsf_time) -+{ -+ struct ath_common *common = ath9k_hw_common(sc->sc_ah); -+ -+ avp->noa_index++; -+ avp->offchannel_start = tsf_time; -+ avp->offchannel_duration = sc->sched.offchannel_duration; -+ -+ ath_dbg(common, CHAN_CTX, -+ "offchannel noa_duration: %d, noa_start: %d, noa_index: %d\n", -+ avp->offchannel_duration, -+ avp->offchannel_start, -+ avp->noa_index); -+ -+ /* -+ * When multiple contexts are active, the NoA -+ * has to be recalculated and advertised after -+ * an offchannel operation. -+ */ -+ if (ctx->active && avp->noa_duration) -+ avp->noa_duration = 0; -+} -+ - void ath_chanctx_event(struct ath_softc *sc, struct ieee80211_vif *vif, - enum ath_chanctx_event ev) - { -@@ -461,24 +487,7 @@ void ath_chanctx_event(struct ath_softc - * values and increment the index. - */ - if (sc->next_chan == &sc->offchannel.chan) { -- avp->noa_index++; -- avp->offchannel_start = tsf_time; -- avp->offchannel_duration = sc->sched.offchannel_duration; -- -- ath_dbg(common, CHAN_CTX, -- "offchannel noa_duration: %d, noa_start: %d, noa_index: %d\n", -- avp->offchannel_duration, -- avp->offchannel_start, -- avp->noa_index); -- -- /* -- * When multiple contexts are active, the NoA -- * has to be recalculated and advertised after -- * an offchannel operation. -- */ -- if (ctx->active && avp->noa_duration) -- avp->noa_duration = 0; -- -+ ath_chanctx_offchannel_noa(sc, ctx, avp, tsf_time); - break; - } - diff --git a/package/kernel/mac80211/patches/319-ath9k-Use-a-helper-function-to-set-NoA.patch b/package/kernel/mac80211/patches/319-ath9k-Use-a-helper-function-to-set-NoA.patch deleted file mode 100644 index e975995565..0000000000 --- a/package/kernel/mac80211/patches/319-ath9k-Use-a-helper-function-to-set-NoA.patch +++ /dev/null @@ -1,84 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:24 +0530 -Subject: [PATCH] ath9k: Use a helper function to set NoA - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -392,6 +392,39 @@ static void ath_chanctx_offchannel_noa(s - avp->noa_duration = 0; - } - -+static void ath_chanctx_set_periodic_noa(struct ath_softc *sc, -+ struct ath_vif *avp, -+ struct ath_beacon_config *cur_conf, -+ u32 tsf_time, -+ u32 beacon_int) -+{ -+ struct ath_common *common = ath9k_hw_common(sc->sc_ah); -+ -+ avp->noa_index++; -+ avp->noa_start = tsf_time; -+ -+ if (sc->sched.extend_absence) -+ avp->noa_duration = (3 * beacon_int / 2) + -+ sc->sched.channel_switch_time; -+ else -+ avp->noa_duration = -+ TU_TO_USEC(cur_conf->beacon_interval) / 2 + -+ sc->sched.channel_switch_time; -+ -+ if (test_bit(ATH_OP_SCANNING, &common->op_flags) || -+ sc->sched.extend_absence) -+ avp->periodic_noa = false; -+ else -+ avp->periodic_noa = true; -+ -+ ath_dbg(common, CHAN_CTX, -+ "noa_duration: %d, noa_start: %d, noa_index: %d, periodic: %d\n", -+ avp->noa_duration, -+ avp->noa_start, -+ avp->noa_index, -+ avp->periodic_noa); -+} -+ - void ath_chanctx_event(struct ath_softc *sc, struct ieee80211_vif *vif, - enum ath_chanctx_event ev) - { -@@ -521,31 +554,9 @@ void ath_chanctx_event(struct ath_softc - * announcement. - */ - if (ctx->active && -- (!avp->noa_duration || sc->sched.force_noa_update)) { -- avp->noa_index++; -- avp->noa_start = tsf_time; -- -- if (sc->sched.extend_absence) -- avp->noa_duration = (3 * beacon_int / 2) + -- sc->sched.channel_switch_time; -- else -- avp->noa_duration = -- TU_TO_USEC(cur_conf->beacon_interval) / 2 + -- sc->sched.channel_switch_time; -- -- if (test_bit(ATH_OP_SCANNING, &common->op_flags) || -- sc->sched.extend_absence) -- avp->periodic_noa = false; -- else -- avp->periodic_noa = true; -- -- ath_dbg(common, CHAN_CTX, -- "noa_duration: %d, noa_start: %d, noa_index: %d, periodic: %d\n", -- avp->noa_duration, -- avp->noa_start, -- avp->noa_index, -- avp->periodic_noa); -- } -+ (!avp->noa_duration || sc->sched.force_noa_update)) -+ ath_chanctx_set_periodic_noa(sc, avp, cur_conf, -+ tsf_time, beacon_int); - - if (ctx->active && sc->sched.force_noa_update) - sc->sched.force_noa_update = false; diff --git a/package/kernel/mac80211/patches/320-ath9k-Use-a-helper-function-for-bmiss.patch b/package/kernel/mac80211/patches/320-ath9k-Use-a-helper-function-for-bmiss.patch deleted file mode 100644 index 03b76ecd7c..0000000000 --- a/package/kernel/mac80211/patches/320-ath9k-Use-a-helper-function-for-bmiss.patch +++ /dev/null @@ -1,68 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:25 +0530 -Subject: [PATCH] ath9k: Use a helper function for bmiss - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -366,6 +366,31 @@ static void ath_chanctx_setup_timer(stru - "Setup chanctx timer with timeout: %d ms\n", jiffies_to_msecs(tsf_time)); - } - -+static void ath_chanctx_handle_bmiss(struct ath_softc *sc, -+ struct ath_chanctx *ctx, -+ struct ath_vif *avp) -+{ -+ /* -+ * Clear the extend_absence flag if it had been -+ * set during the previous beacon transmission, -+ * since we need to revert to the normal NoA -+ * schedule. -+ */ -+ if (ctx->active && sc->sched.extend_absence) { -+ avp->noa_duration = 0; -+ sc->sched.extend_absence = false; -+ } -+ -+ /* If at least two consecutive beacons were missed on the STA -+ * chanctx, stay on the STA channel for one extra beacon period, -+ * to resync the timer properly. -+ */ -+ if (ctx->active && sc->sched.beacon_miss >= 2) { -+ avp->noa_duration = 0; -+ sc->sched.extend_absence = true; -+ } -+} -+ - static void ath_chanctx_offchannel_noa(struct ath_softc *sc, - struct ath_chanctx *ctx, - struct ath_vif *avp, -@@ -524,25 +549,7 @@ void ath_chanctx_event(struct ath_softc - break; - } - -- /* -- * Clear the extend_absence flag if it had been -- * set during the previous beacon transmission, -- * since we need to revert to the normal NoA -- * schedule. -- */ -- if (ctx->active && sc->sched.extend_absence) { -- avp->noa_duration = 0; -- sc->sched.extend_absence = false; -- } -- -- /* If at least two consecutive beacons were missed on the STA -- * chanctx, stay on the STA channel for one extra beacon period, -- * to resync the timer properly. -- */ -- if (ctx->active && sc->sched.beacon_miss >= 2) { -- avp->noa_duration = 0; -- sc->sched.extend_absence = true; -- } -+ ath_chanctx_handle_bmiss(sc, ctx, avp); - - /* Prevent wrap-around issues */ - if (avp->noa_duration && tsf_time - avp->noa_start > BIT(30)) diff --git a/package/kernel/mac80211/patches/321-ath9k-Fix-RoC-expiration.patch b/package/kernel/mac80211/patches/321-ath9k-Fix-RoC-expiration.patch deleted file mode 100644 index 5a99a33dfb..0000000000 --- a/package/kernel/mac80211/patches/321-ath9k-Fix-RoC-expiration.patch +++ /dev/null @@ -1,38 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:26 +0530 -Subject: [PATCH] ath9k: Fix RoC expiration - -mac80211 has to be notified when a RoC period -expires in the driver. In MCC mode, since the -offchannel/RoC timer is set with the requested -duration, ieee80211_remain_on_channel_expired() needs -to be called when the timer expires. - -But, currently it is done after we move back to -the operating channel. This is incorrect - fix this -by calling ieee80211_remain_on_channel_expired() when -the RoC timer expires and in ath_roc_complete() when -the RoC request is aborted. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -894,7 +894,7 @@ void ath_roc_complete(struct ath_softc * - - sc->offchannel.roc_vif = NULL; - sc->offchannel.roc_chan = NULL; -- if (!abort) -+ if (abort) - ieee80211_remain_on_channel_expired(sc->hw); - ath_offchannel_next(sc); - ath9k_ps_restore(sc); -@@ -1028,6 +1028,7 @@ static void ath_offchannel_timer(unsigne - case ATH_OFFCHANNEL_ROC_WAIT: - ctx = ath_chanctx_get_oper_chan(sc, false); - sc->offchannel.state = ATH_OFFCHANNEL_ROC_DONE; -+ ieee80211_remain_on_channel_expired(sc->hw); - ath_chanctx_switch(sc, ctx, NULL); - break; - default: diff --git a/package/kernel/mac80211/patches/322-ath9k-Send-oneshot-NoA.patch b/package/kernel/mac80211/patches/322-ath9k-Send-oneshot-NoA.patch deleted file mode 100644 index 331d714fdd..0000000000 --- a/package/kernel/mac80211/patches/322-ath9k-Send-oneshot-NoA.patch +++ /dev/null @@ -1,85 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:27 +0530 -Subject: [PATCH] ath9k: Send oneshot NoA - -This patch makes sure that a GO interface -sends out a new NoA schedule with 200ms duration -when mgd_prepare_tx() is called. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/ath9k.h -+++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -620,6 +620,7 @@ struct ath_vif { - u32 noa_start; - u32 noa_duration; - bool periodic_noa; -+ bool oneshot_noa; - }; - - struct ath9k_vif_iter_data { ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -450,6 +450,27 @@ static void ath_chanctx_set_periodic_noa - avp->periodic_noa); - } - -+static void ath_chanctx_set_oneshot_noa(struct ath_softc *sc, -+ struct ath_vif *avp, -+ u32 tsf_time, -+ u32 duration) -+{ -+ struct ath_common *common = ath9k_hw_common(sc->sc_ah); -+ -+ avp->noa_index++; -+ avp->noa_start = tsf_time; -+ avp->periodic_noa = false; -+ avp->oneshot_noa = true; -+ avp->noa_duration = duration + sc->sched.channel_switch_time; -+ -+ ath_dbg(common, CHAN_CTX, -+ "oneshot noa_duration: %d, noa_start: %d, noa_index: %d, periodic: %d\n", -+ avp->noa_duration, -+ avp->noa_start, -+ avp->noa_index, -+ avp->periodic_noa); -+} -+ - void ath_chanctx_event(struct ath_softc *sc, struct ieee80211_vif *vif, - enum ath_chanctx_event ev) - { -@@ -476,6 +497,14 @@ void ath_chanctx_event(struct ath_softc - if (avp->offchannel_duration) - avp->offchannel_duration = 0; - -+ if (avp->oneshot_noa) { -+ avp->noa_duration = 0; -+ avp->oneshot_noa = false; -+ -+ ath_dbg(common, CHAN_CTX, -+ "Clearing oneshot NoA\n"); -+ } -+ - if (avp->chanctx != sc->cur_chan) { - ath_dbg(common, CHAN_CTX, - "Contexts differ, not preparing beacon\n"); -@@ -551,6 +580,18 @@ void ath_chanctx_event(struct ath_softc - - ath_chanctx_handle_bmiss(sc, ctx, avp); - -+ /* -+ * If a mgd_prepare_tx() has been called by mac80211, -+ * a one-shot NoA needs to be sent. This can happen -+ * with one or more active channel contexts - in both -+ * cases, a new NoA schedule has to be advertised. -+ */ -+ if (sc->sched.mgd_prepare_tx) { -+ ath_chanctx_set_oneshot_noa(sc, avp, tsf_time, -+ jiffies_to_usecs(HZ / 5)); -+ break; -+ } -+ - /* Prevent wrap-around issues */ - if (avp->noa_duration && tsf_time - avp->noa_start > BIT(30)) - avp->noa_duration = 0; diff --git a/package/kernel/mac80211/patches/323-ath9k-Fix-HW-scan-abort.patch b/package/kernel/mac80211/patches/323-ath9k-Fix-HW-scan-abort.patch deleted file mode 100644 index 56c0489bd1..0000000000 --- a/package/kernel/mac80211/patches/323-ath9k-Fix-HW-scan-abort.patch +++ /dev/null @@ -1,68 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:28 +0530 -Subject: [PATCH] ath9k: Fix HW scan abort - -Instead of using ATH_CHANCTX_EVENT_ASSIGN to abort -a HW scan when a new interface becomes active, use the -mgd_prepare_tx() callback. This allows us to make -sure that the GO's channel becomes operational by -using flush_work(). - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -743,22 +743,6 @@ void ath_chanctx_event(struct ath_softc - ieee80211_queue_work(sc->hw, &sc->chanctx_work); - break; - case ATH_CHANCTX_EVENT_ASSIGN: -- /* -- * When adding a new channel context, check if a scan -- * is in progress and abort it since the addition of -- * a new channel context is usually followed by VIF -- * assignment, in which case we have to start multi-channel -- * operation. -- */ -- if (test_bit(ATH_OP_SCANNING, &common->op_flags)) { -- ath_dbg(common, CHAN_CTX, -- "Aborting HW scan to add new context\n"); -- -- spin_unlock_bh(&sc->chan_lock); -- del_timer_sync(&sc->offchannel.timer); -- ath_scan_complete(sc, true); -- spin_lock_bh(&sc->chan_lock); -- } - break; - case ATH_CHANCTX_EVENT_CHANGE: - break; ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -2365,7 +2365,6 @@ static int ath9k_add_chanctx(struct ieee - conf->def.chan->center_freq); - - ath_chanctx_set_channel(sc, ctx, &conf->def); -- ath_chanctx_event(sc, NULL, ATH_CHANCTX_EVENT_ASSIGN); - - mutex_unlock(&sc->mutex); - return 0; -@@ -2496,6 +2495,19 @@ static void ath9k_mgd_prepare_tx(struct - if (!changed) - goto out; - -+ if (test_bit(ATH_OP_SCANNING, &common->op_flags)) { -+ ath_dbg(common, CHAN_CTX, -+ "%s: Aborting HW scan\n", __func__); -+ -+ mutex_unlock(&sc->mutex); -+ -+ del_timer_sync(&sc->offchannel.timer); -+ ath_scan_complete(sc, true); -+ flush_work(&sc->chanctx_work); -+ -+ mutex_lock(&sc->mutex); -+ } -+ - go_ctx = ath_is_go_chanctx_present(sc); - - if (go_ctx) { diff --git a/package/kernel/mac80211/patches/324-ath9k-Improve-flush-in-mcc-mode.patch b/package/kernel/mac80211/patches/324-ath9k-Improve-flush-in-mcc-mode.patch deleted file mode 100644 index 40e095b970..0000000000 --- a/package/kernel/mac80211/patches/324-ath9k-Improve-flush-in-mcc-mode.patch +++ /dev/null @@ -1,95 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:29 +0530 -Subject: [PATCH] ath9k: Improve flush() in mcc mode - -The flush timeout in MCC mode is very small, since -we are constrained by the time slice for each -channel context, but since only the HW queues are -flushed when switching contexts, it is acceptable. - -Since the SW queues are also emptied in the mac80211 flush() -callback, a larger duration is needed. Add an override -argument to __ath9k_flush() and set it when flush() -is called in MCC mode. This allows the driver to -drain both the SW and HW queues. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/ath9k.h -+++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -719,7 +719,7 @@ void ath_update_survey_nf(struct ath_sof - void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type); - void ath_ps_full_sleep(unsigned long data); - void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop, -- bool sw_pending); -+ bool sw_pending, bool timeout_override); - - /**********/ - /* BTCOEX */ ---- a/drivers/net/wireless/ath/ath9k/channel.c -+++ b/drivers/net/wireless/ath/ath9k/channel.c -@@ -1232,11 +1232,11 @@ void ath_chanctx_set_next(struct ath_sof - ath9k_chanctx_stop_queues(sc, sc->cur_chan); - queues_stopped = true; - -- __ath9k_flush(sc->hw, ~0, true, false); -+ __ath9k_flush(sc->hw, ~0, true, false, false); - - if (ath_chanctx_send_ps_frame(sc, true)) - __ath9k_flush(sc->hw, BIT(IEEE80211_AC_VO), -- false, false); -+ false, false, false); - - send_ps = true; - spin_lock_bh(&sc->chan_lock); ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -2031,14 +2031,33 @@ static void ath9k_flush(struct ieee80211 - u32 queues, bool drop) - { - struct ath_softc *sc = hw->priv; -+ struct ath_common *common = ath9k_hw_common(sc->sc_ah); -+ -+ if (ath9k_is_chanctx_enabled()) { -+ if (!test_bit(ATH_OP_MULTI_CHANNEL, &common->op_flags)) -+ goto flush; - -+ /* -+ * If MCC is active, extend the flush timeout -+ * and wait for the HW/SW queues to become -+ * empty. This needs to be done outside the -+ * sc->mutex lock to allow the channel scheduler -+ * to switch channel contexts. -+ * -+ * The vif queues have been stopped in mac80211, -+ * so there won't be any incoming frames. -+ */ -+ __ath9k_flush(hw, queues, drop, true, true); -+ return; -+ } -+flush: - mutex_lock(&sc->mutex); -- __ath9k_flush(hw, queues, drop, true); -+ __ath9k_flush(hw, queues, drop, true, false); - mutex_unlock(&sc->mutex); - } - - void __ath9k_flush(struct ieee80211_hw *hw, u32 queues, bool drop, -- bool sw_pending) -+ bool sw_pending, bool timeout_override) - { - struct ath_softc *sc = hw->priv; - struct ath_hw *ah = sc->sc_ah; -@@ -2059,7 +2078,10 @@ void __ath9k_flush(struct ieee80211_hw * - } - - spin_lock_bh(&sc->chan_lock); -- timeout = sc->cur_chan->flush_timeout; -+ if (timeout_override) -+ timeout = HZ / 5; -+ else -+ timeout = sc->cur_chan->flush_timeout; - spin_unlock_bh(&sc->chan_lock); - - ath_dbg(common, CHAN_CTX, diff --git a/package/kernel/mac80211/patches/325-ath9k-Do-not-start-BA-when-scanning.patch b/package/kernel/mac80211/patches/325-ath9k-Do-not-start-BA-when-scanning.patch deleted file mode 100644 index 69eb58c50f..0000000000 --- a/package/kernel/mac80211/patches/325-ath9k-Do-not-start-BA-when-scanning.patch +++ /dev/null @@ -1,60 +0,0 @@ -From: Sujith Manoharan -Date: Fri, 17 Oct 2014 07:40:30 +0530 -Subject: [PATCH] ath9k: Do not start BA when scanning - -mac80211 currently has a race which can be hit -with this sequence: - -* Start a scan operation. -* TX BA is initiated by ieee80211_start_tx_ba_session(). -* Driver sets up internal state and calls - ieee80211_start_tx_ba_cb_irqsafe(). -* mac80211 adds a packet to sdata->skb_queue with - type IEEE80211_SDATA_QUEUE_AGG_START. -* ieee80211_iface_work() doesn't process the - packet because scan is in progress. -* ADDBA response timer expires and the sta/tid is - torn down. -* Driver receives BA stop notification and calls - ieee80211_stop_tx_ba_cb_irqsafe(). -* This is also added to the queue by mac80211. -* Now, scan finishes. - -At this point, the queued up packets might be processed -if some other operation schedules the sdata work. Since -the tids have been cleaned up already, warnings are hit. - -If this doesn't happen, the packets are left in the queue -until the interface is torn down. - -Since initiating a BA session when scan is in progress -leads to flaky connections, especially in MCC mode, we -can drop the TX BA request. This improves connectivity -with legacy clients in MCC mode. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -1885,6 +1885,7 @@ static int ath9k_ampdu_action(struct iee - u16 tid, u16 *ssn, u8 buf_size) - { - struct ath_softc *sc = hw->priv; -+ struct ath_common *common = ath9k_hw_common(sc->sc_ah); - bool flush = false; - int ret = 0; - -@@ -1896,6 +1897,12 @@ static int ath9k_ampdu_action(struct iee - case IEEE80211_AMPDU_RX_STOP: - break; - case IEEE80211_AMPDU_TX_START: -+ if (ath9k_is_chanctx_enabled()) { -+ if (test_bit(ATH_OP_SCANNING, &common->op_flags)) { -+ ret = -EBUSY; -+ break; -+ } -+ } - ath9k_ps_wakeup(sc); - ret = ath_tx_aggr_start(sc, sta, tid, ssn); - if (!ret) diff --git a/package/kernel/mac80211/patches/326-ath9k_hw-make-support-for-PC-OEM-cards-optional.patch b/package/kernel/mac80211/patches/326-ath9k_hw-make-support-for-PC-OEM-cards-optional.patch deleted file mode 100644 index afc8f74197..0000000000 --- a/package/kernel/mac80211/patches/326-ath9k_hw-make-support-for-PC-OEM-cards-optional.patch +++ /dev/null @@ -1,259 +0,0 @@ -From: Felix Fietkau -Date: Sat, 18 Oct 2014 13:23:34 +0200 -Subject: [PATCH] ath9k_hw: make support for PC-OEM cards optional - -The initvals use up quite a bit of space, and PC-OEM support is -typically not needed on embedded systems - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/Kconfig -+++ b/drivers/net/wireless/ath/ath9k/Kconfig -@@ -151,6 +151,11 @@ config ATH9K_CHANNEL_CONTEXT - for multi-channel concurrency. Enable this if P2P PowerSave support - is required. - -+config ATH9K_PCOEM -+ bool "Atheros ath9k support for PC OEM cards" if EXPERT -+ depends on ATH9K -+ default y -+ - config ATH9K_HTC - tristate "Atheros HTC based wireless cards support" - depends on m ---- a/drivers/net/wireless/ath/ath9k/Makefile -+++ b/drivers/net/wireless/ath/ath9k/Makefile -@@ -32,7 +32,6 @@ ath9k_hw-y:= \ - ar5008_phy.o \ - ar9002_calib.o \ - ar9003_calib.o \ -- ar9003_rtt.o \ - calib.o \ - eeprom.o \ - eeprom_def.o \ -@@ -50,6 +49,8 @@ ath9k_hw-$(CPTCFG_ATH9K_WOW) += ar9003_w - ath9k_hw-$(CPTCFG_ATH9K_BTCOEX_SUPPORT) += btcoex.o \ - ar9003_mci.o - -+ath9k_hw-$(CPTCFG_ATH9K_PCOEM) += ar9003_rtt.o -+ - ath9k_hw-$(CPTCFG_ATH9K_DYNACK) += dynack.o - - obj-$(CPTCFG_ATH9K_HW) += ath9k_hw.o ---- a/drivers/net/wireless/ath/ath9k/ar9003_rtt.h -+++ b/drivers/net/wireless/ath/ath9k/ar9003_rtt.h -@@ -17,6 +17,7 @@ - #ifndef AR9003_RTT_H - #define AR9003_RTT_H - -+#ifdef CPTCFG_ATH9K_PCOEM - void ar9003_hw_rtt_enable(struct ath_hw *ah); - void ar9003_hw_rtt_disable(struct ath_hw *ah); - void ar9003_hw_rtt_set_mask(struct ath_hw *ah, u32 rtt_mask); -@@ -25,5 +26,40 @@ void ar9003_hw_rtt_load_hist(struct ath_ - void ar9003_hw_rtt_fill_hist(struct ath_hw *ah); - void ar9003_hw_rtt_clear_hist(struct ath_hw *ah); - bool ar9003_hw_rtt_restore(struct ath_hw *ah, struct ath9k_channel *chan); -+#else -+static inline void ar9003_hw_rtt_enable(struct ath_hw *ah) -+{ -+} -+ -+static inline void ar9003_hw_rtt_disable(struct ath_hw *ah) -+{ -+} -+ -+static inline void ar9003_hw_rtt_set_mask(struct ath_hw *ah, u32 rtt_mask) -+{ -+} -+ -+static inline bool ar9003_hw_rtt_force_restore(struct ath_hw *ah) -+{ -+ return false; -+} -+ -+static inline void ar9003_hw_rtt_load_hist(struct ath_hw *ah) -+{ -+} -+ -+static inline void ar9003_hw_rtt_fill_hist(struct ath_hw *ah) -+{ -+} -+ -+static inline void ar9003_hw_rtt_clear_hist(struct ath_hw *ah) -+{ -+} -+ -+static inline bool ar9003_hw_rtt_restore(struct ath_hw *ah, struct ath9k_channel *chan) -+{ -+ return false; -+} -+#endif - - #endif ---- a/drivers/net/wireless/ath/ath9k/hw.h -+++ b/drivers/net/wireless/ath/ath9k/hw.h -@@ -244,13 +244,20 @@ enum ath9k_hw_caps { - ATH9K_HW_CAP_2GHZ = BIT(11), - ATH9K_HW_CAP_5GHZ = BIT(12), - ATH9K_HW_CAP_APM = BIT(13), -+#ifdef CPTCFG_ATH9K_PCOEM - ATH9K_HW_CAP_RTT = BIT(14), - ATH9K_HW_CAP_MCI = BIT(15), -- ATH9K_HW_CAP_DFS = BIT(16), -- ATH9K_HW_WOW_DEVICE_CAPABLE = BIT(17), -- ATH9K_HW_CAP_PAPRD = BIT(18), -- ATH9K_HW_CAP_FCC_BAND_SWITCH = BIT(19), -- ATH9K_HW_CAP_BT_ANT_DIV = BIT(20), -+ ATH9K_HW_WOW_DEVICE_CAPABLE = BIT(16), -+ ATH9K_HW_CAP_BT_ANT_DIV = BIT(17), -+#else -+ ATH9K_HW_CAP_RTT = 0, -+ ATH9K_HW_CAP_MCI = 0, -+ ATH9K_HW_WOW_DEVICE_CAPABLE = 0, -+ ATH9K_HW_CAP_BT_ANT_DIV = 0, -+#endif -+ ATH9K_HW_CAP_DFS = BIT(18), -+ ATH9K_HW_CAP_PAPRD = BIT(19), -+ ATH9K_HW_CAP_FCC_BAND_SWITCH = BIT(20), - }; - - /* ---- a/drivers/net/wireless/ath/ath9k/init.c -+++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -362,6 +362,9 @@ static void ath9k_init_pcoem_platform(st - struct ath9k_hw_capabilities *pCap = &ah->caps; - struct ath_common *common = ath9k_hw_common(ah); - -+ if (!IS_ENABLED(CPTCFG_ATH9K_PCOEM)) -+ return; -+ - if (common->bus_ops->ath_bus_type != ATH_PCI) - return; - ---- a/drivers/net/wireless/ath/ath9k/pci.c -+++ b/drivers/net/wireless/ath/ath9k/pci.c -@@ -30,6 +30,7 @@ static const struct pci_device_id ath_pc - { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */ - { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */ - -+#ifdef CPTCFG_ATH9K_PCOEM - { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, - 0x002A, - PCI_VENDOR_ID_AZWAVE, -@@ -82,6 +83,7 @@ static const struct pci_device_id ath_pc - PCI_VENDOR_ID_AZWAVE, - 0x2C37), - .driver_data = ATH9K_PCI_BT_ANT_DIV }, -+#endif - - { PCI_VDEVICE(ATHEROS, 0x002B) }, /* PCI-E */ - { PCI_VDEVICE(ATHEROS, 0x002C) }, /* PCI-E 802.11n bonded out */ -@@ -102,6 +104,7 @@ static const struct pci_device_id ath_pc - - { PCI_VDEVICE(ATHEROS, 0x0030) }, /* PCI-E AR9300 */ - -+#ifdef CPTCFG_ATH9K_PCOEM - /* PCI-E CUS198 */ - { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, - 0x0032, -@@ -294,10 +297,12 @@ static const struct pci_device_id ath_pc - PCI_VENDOR_ID_ASUSTEK, - 0x850D), - .driver_data = ATH9K_PCI_NO_PLL_PWRSAVE }, -+#endif - - { PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E AR9485 */ - { PCI_VDEVICE(ATHEROS, 0x0033) }, /* PCI-E AR9580 */ - -+#ifdef CPTCFG_ATH9K_PCOEM - /* PCI-E CUS217 */ - { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, - 0x0034, -@@ -657,6 +662,7 @@ static const struct pci_device_id ath_pc - /* PCI-E AR9565 (WB335) */ - { PCI_VDEVICE(ATHEROS, 0x0036), - .driver_data = ATH9K_PCI_BT_ANT_DIV }, -+#endif - - { 0 } - }; ---- a/drivers/net/wireless/ath/ath9k/reg.h -+++ b/drivers/net/wireless/ath/ath9k/reg.h -@@ -892,10 +892,21 @@ - (AR_SREV_9330((_ah)) && \ - ((_ah)->hw_version.macRev == AR_SREV_REVISION_9330_12)) - -+#ifdef CPTCFG_ATH9K_PCOEM -+#define AR_SREV_9462(_ah) \ -+ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462)) - #define AR_SREV_9485(_ah) \ - (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9485)) -+#define AR_SREV_9565(_ah) \ -+ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565)) -+#else -+#define AR_SREV_9462(_ah) 0 -+#define AR_SREV_9485(_ah) 0 -+#define AR_SREV_9565(_ah) 0 -+#endif -+ - #define AR_SREV_9485_11_OR_LATER(_ah) \ -- (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9485) && \ -+ (AR_SREV_9485(_ah) && \ - ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9485_11)) - #define AR_SREV_9485_OR_LATER(_ah) \ - (((_ah)->hw_version.macVersion >= AR_SREV_VERSION_9485)) -@@ -915,34 +926,30 @@ - (AR_SREV_9285_12_OR_LATER(_ah) && \ - ((REG_READ(_ah, AR_AN_SYNTH9) & 0x7) == 0x1)) - --#define AR_SREV_9462(_ah) \ -- (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462)) - #define AR_SREV_9462_20(_ah) \ -- (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462) && \ -+ (AR_SREV_9462(_ah) && \ - ((_ah)->hw_version.macRev == AR_SREV_REVISION_9462_20)) - #define AR_SREV_9462_21(_ah) \ -- (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462) && \ -+ (AR_SREV_9462(_ah) && \ - ((_ah)->hw_version.macRev == AR_SREV_REVISION_9462_21)) - #define AR_SREV_9462_20_OR_LATER(_ah) \ -- (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462) && \ -+ (AR_SREV_9462(_ah) && \ - ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9462_20)) - #define AR_SREV_9462_21_OR_LATER(_ah) \ -- (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462) && \ -+ (AR_SREV_9462(_ah) && \ - ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9462_21)) - --#define AR_SREV_9565(_ah) \ -- (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565)) - #define AR_SREV_9565_10(_ah) \ -- (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565) && \ -+ (AR_SREV_9565(_ah) && \ - ((_ah)->hw_version.macRev == AR_SREV_REVISION_9565_10)) - #define AR_SREV_9565_101(_ah) \ -- (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565) && \ -+ (AR_SREV_9565(_ah) && \ - ((_ah)->hw_version.macRev == AR_SREV_REVISION_9565_101)) - #define AR_SREV_9565_11(_ah) \ -- (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565) && \ -+ (AR_SREV_9565(_ah) && \ - ((_ah)->hw_version.macRev == AR_SREV_REVISION_9565_11)) - #define AR_SREV_9565_11_OR_LATER(_ah) \ -- (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565) && \ -+ (AR_SREV_9565(_ah) && \ - ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9565_11)) - - #define AR_SREV_9550(_ah) \ ---- a/.local-symbols -+++ b/.local-symbols -@@ -124,6 +124,7 @@ ATH9K_HW= - ATH9K_COMMON= - ATH9K_DFS_DEBUGFS= - ATH9K_BTCOEX_SUPPORT= -+ATH9K_PCOEM= - ATH9K= - ATH9K_PCI= - ATH9K_AHB= diff --git a/package/kernel/mac80211/patches/327-ath9k_hw-remove-support-for-UB124-tx-gain-table.patch b/package/kernel/mac80211/patches/327-ath9k_hw-remove-support-for-UB124-tx-gain-table.patch deleted file mode 100644 index a76819dc52..0000000000 --- a/package/kernel/mac80211/patches/327-ath9k_hw-remove-support-for-UB124-tx-gain-table.patch +++ /dev/null @@ -1,22 +0,0 @@ -From: Felix Fietkau -Date: Sat, 18 Oct 2014 13:25:26 +0200 -Subject: [PATCH] ath9k_hw: remove support for UB124 tx gain table - -UB124 is a USB based reference design not supported by ath9k or -ath9k_htc. - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c -+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c -@@ -670,9 +670,6 @@ static void ar9003_tx_gain_table_mode5(s - if (AR_SREV_9485_11_OR_LATER(ah)) - INIT_INI_ARRAY(&ah->iniModesTxGain, - ar9485Modes_green_ob_db_tx_gain_1_1); -- else if (AR_SREV_9340(ah)) -- INIT_INI_ARRAY(&ah->iniModesTxGain, -- ar9340Modes_ub124_tx_gain_table_1p0); - else if (AR_SREV_9580(ah)) - INIT_INI_ARRAY(&ah->iniModesTxGain, - ar9580_1p0_type5_tx_gain_table); diff --git a/package/kernel/mac80211/patches/328-ath9k-fix-processing-RXORN-interrupts.patch b/package/kernel/mac80211/patches/328-ath9k-fix-processing-RXORN-interrupts.patch deleted file mode 100644 index e9dbc6820e..0000000000 --- a/package/kernel/mac80211/patches/328-ath9k-fix-processing-RXORN-interrupts.patch +++ /dev/null @@ -1,33 +0,0 @@ -From: Felix Fietkau -Date: Sat, 18 Oct 2014 13:31:52 +0200 -Subject: [PATCH] ath9k: fix processing RXORN interrupts - -The "goto chip_reset" is a bit misleading, because it does not actually -issue a chip reset. Instead it is bypassing processing of other -interrupts and assumes that the tasklet will issue a chip reset. - -In the case of RXORN this does not happen, so bypassing processing of -other interrupts will simply allow them to fire again. Even if RXORN -was triggering a reset, it is not critical enough to need the bypass -here. - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -545,11 +545,10 @@ irqreturn_t ath_isr(int irq, void *dev) - sched = true; - - /* -- * If a FATAL or RXORN interrupt is received, we have to reset the -- * chip immediately. -+ * If a FATAL interrupt is received, we have to reset the chip -+ * immediately. - */ -- if ((status & ATH9K_INT_FATAL) || ((status & ATH9K_INT_RXORN) && -- !(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA))) -+ if (status & ATH9K_INT_FATAL) - goto chip_reset; - - if ((ah->config.hw_hang_checks & HW_BB_WATCHDOG) && diff --git a/package/kernel/mac80211/patches/329-ath9k-clean-up-debugfs-print-of-reset-causes.patch b/package/kernel/mac80211/patches/329-ath9k-clean-up-debugfs-print-of-reset-causes.patch deleted file mode 100644 index 0f01a3ae24..0000000000 --- a/package/kernel/mac80211/patches/329-ath9k-clean-up-debugfs-print-of-reset-causes.patch +++ /dev/null @@ -1,69 +0,0 @@ -From: Felix Fietkau -Date: Sat, 18 Oct 2014 13:36:41 +0200 -Subject: [PATCH] ath9k: clean up debugfs print of reset causes - -Reduce code duplication - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/debug.c -+++ b/drivers/net/wireless/ath/ath9k/debug.c -@@ -852,36 +852,30 @@ static ssize_t read_file_reset(struct fi - size_t count, loff_t *ppos) - { - struct ath_softc *sc = file->private_data; -+ static const char * const reset_cause[__RESET_TYPE_MAX] = { -+ [RESET_TYPE_BB_HANG] = "Baseband Hang", -+ [RESET_TYPE_BB_WATCHDOG] = "Baseband Watchdog", -+ [RESET_TYPE_FATAL_INT] = "Fatal HW Error", -+ [RESET_TYPE_TX_ERROR] = "TX HW error", -+ [RESET_TYPE_TX_GTT] = "Transmit timeout", -+ [RESET_TYPE_TX_HANG] = "TX Path Hang", -+ [RESET_TYPE_PLL_HANG] = "PLL RX Hang", -+ [RESET_TYPE_MAC_HANG] = "MAC Hang", -+ [RESET_TYPE_BEACON_STUCK] = "Stuck Beacon", -+ [RESET_TYPE_MCI] = "MCI Reset", -+ }; - char buf[512]; - unsigned int len = 0; -+ int i; - -- len += scnprintf(buf + len, sizeof(buf) - len, -- "%17s: %2d\n", "Baseband Hang", -- sc->debug.stats.reset[RESET_TYPE_BB_HANG]); -- len += scnprintf(buf + len, sizeof(buf) - len, -- "%17s: %2d\n", "Baseband Watchdog", -- sc->debug.stats.reset[RESET_TYPE_BB_WATCHDOG]); -- len += scnprintf(buf + len, sizeof(buf) - len, -- "%17s: %2d\n", "Fatal HW Error", -- sc->debug.stats.reset[RESET_TYPE_FATAL_INT]); -- len += scnprintf(buf + len, sizeof(buf) - len, -- "%17s: %2d\n", "TX HW error", -- sc->debug.stats.reset[RESET_TYPE_TX_ERROR]); -- len += scnprintf(buf + len, sizeof(buf) - len, -- "%17s: %2d\n", "TX Path Hang", -- sc->debug.stats.reset[RESET_TYPE_TX_HANG]); -- len += scnprintf(buf + len, sizeof(buf) - len, -- "%17s: %2d\n", "PLL RX Hang", -- sc->debug.stats.reset[RESET_TYPE_PLL_HANG]); -- len += scnprintf(buf + len, sizeof(buf) - len, -- "%17s: %2d\n", "MAC Hang", -- sc->debug.stats.reset[RESET_TYPE_MAC_HANG]); -- len += scnprintf(buf + len, sizeof(buf) - len, -- "%17s: %2d\n", "Stuck Beacon", -- sc->debug.stats.reset[RESET_TYPE_BEACON_STUCK]); -- len += scnprintf(buf + len, sizeof(buf) - len, -- "%17s: %2d\n", "MCI Reset", -- sc->debug.stats.reset[RESET_TYPE_MCI]); -+ for (i = 0; i < ARRAY_SIZE(reset_cause); i++) { -+ if (!reset_cause[i]) -+ continue; -+ -+ len += scnprintf(buf + len, sizeof(buf) - len, -+ "%17s: %2d\n", reset_cause[i], -+ sc->debug.stats.reset[i]); -+ } - - if (len > sizeof(buf)) - len = sizeof(buf); diff --git a/package/kernel/mac80211/patches/330-ath9k-restart-hardware-after-noise-floor-calibration.patch b/package/kernel/mac80211/patches/330-ath9k-restart-hardware-after-noise-floor-calibration.patch deleted file mode 100644 index 6a27be76bd..0000000000 --- a/package/kernel/mac80211/patches/330-ath9k-restart-hardware-after-noise-floor-calibration.patch +++ /dev/null @@ -1,185 +0,0 @@ -From: Felix Fietkau -Date: Sat, 18 Oct 2014 13:37:32 +0200 -Subject: [PATCH] ath9k: restart hardware after noise floor calibration - failure - -When NF calibration fails, the radio often becomes deaf. The usual -hardware hang checks do not detect this, so it's better to issue a reset -when that happens. - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c -+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c -@@ -657,14 +657,13 @@ static void ar9002_hw_olc_temp_compensat - ar9280_hw_olc_temp_compensation(ah); - } - --static bool ar9002_hw_calibrate(struct ath_hw *ah, -- struct ath9k_channel *chan, -- u8 rxchainmask, -- bool longcal) -+static int ar9002_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan, -+ u8 rxchainmask, bool longcal) - { - bool iscaldone = true; - struct ath9k_cal_list *currCal = ah->cal_list_curr; - bool nfcal, nfcal_pending = false; -+ int ret; - - nfcal = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF); - if (ah->caldata) -@@ -698,7 +697,9 @@ static bool ar9002_hw_calibrate(struct a - * NF is slow time-variant, so it is OK to use a - * historical value. - */ -- ath9k_hw_loadnf(ah, ah->curchan); -+ ret = ath9k_hw_loadnf(ah, ah->curchan); -+ if (ret < 0) -+ return ret; - } - - if (longcal) { ---- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c -+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c -@@ -121,13 +121,12 @@ static bool ar9003_hw_per_calibration(st - return iscaldone; - } - --static bool ar9003_hw_calibrate(struct ath_hw *ah, -- struct ath9k_channel *chan, -- u8 rxchainmask, -- bool longcal) -+static int ar9003_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan, -+ u8 rxchainmask, bool longcal) - { - bool iscaldone = true; - struct ath9k_cal_list *currCal = ah->cal_list_curr; -+ int ret; - - /* - * For given calibration: -@@ -163,7 +162,9 @@ static bool ar9003_hw_calibrate(struct a - * NF is slow time-variant, so it is OK to use a historical - * value. - */ -- ath9k_hw_loadnf(ah, ah->curchan); -+ ret = ath9k_hw_loadnf(ah, ah->curchan); -+ if (ret < 0) -+ return ret; - - /* start NF calibration, without updating BB NF register */ - ath9k_hw_start_nfcal(ah, false); ---- a/drivers/net/wireless/ath/ath9k/calib.c -+++ b/drivers/net/wireless/ath/ath9k/calib.c -@@ -234,7 +234,7 @@ void ath9k_hw_start_nfcal(struct ath_hw - REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); - } - --void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) -+int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) - { - struct ath9k_nfcal_hist *h = NULL; - unsigned i, j; -@@ -301,7 +301,7 @@ void ath9k_hw_loadnf(struct ath_hw *ah, - ath_dbg(common, ANY, - "Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n", - REG_READ(ah, AR_PHY_AGC_CONTROL)); -- return; -+ return -ETIMEDOUT; - } - - /* -@@ -322,6 +322,8 @@ void ath9k_hw_loadnf(struct ath_hw *ah, - } - } - REGWRITE_BUFFER_FLUSH(ah); -+ -+ return 0; - } - - ---- a/drivers/net/wireless/ath/ath9k/calib.h -+++ b/drivers/net/wireless/ath/ath9k/calib.h -@@ -109,7 +109,7 @@ struct ath9k_pacal_info{ - - bool ath9k_hw_reset_calvalid(struct ath_hw *ah); - void ath9k_hw_start_nfcal(struct ath_hw *ah, bool update); --void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan); -+int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan); - bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan); - void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah, - struct ath9k_channel *chan); ---- a/drivers/net/wireless/ath/ath9k/debug.c -+++ b/drivers/net/wireless/ath/ath9k/debug.c -@@ -863,6 +863,7 @@ static ssize_t read_file_reset(struct fi - [RESET_TYPE_MAC_HANG] = "MAC Hang", - [RESET_TYPE_BEACON_STUCK] = "Stuck Beacon", - [RESET_TYPE_MCI] = "MCI Reset", -+ [RESET_TYPE_CALIBRATION] = "Calibration error", - }; - char buf[512]; - unsigned int len = 0; ---- a/drivers/net/wireless/ath/ath9k/debug.h -+++ b/drivers/net/wireless/ath/ath9k/debug.h -@@ -49,6 +49,7 @@ enum ath_reset_type { - RESET_TYPE_MAC_HANG, - RESET_TYPE_BEACON_STUCK, - RESET_TYPE_MCI, -+ RESET_TYPE_CALIBRATION, - __RESET_TYPE_MAX - }; - ---- a/drivers/net/wireless/ath/ath9k/hw-ops.h -+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h -@@ -41,10 +41,9 @@ static inline void ath9k_hw_set_desc_lin - ath9k_hw_ops(ah)->set_desc_link(ds, link); - } - --static inline bool ath9k_hw_calibrate(struct ath_hw *ah, -- struct ath9k_channel *chan, -- u8 rxchainmask, -- bool longcal) -+static inline int ath9k_hw_calibrate(struct ath_hw *ah, -+ struct ath9k_channel *chan, -+ u8 rxchainmask, bool longcal) - { - return ath9k_hw_ops(ah)->calibrate(ah, chan, rxchainmask, longcal); - } ---- a/drivers/net/wireless/ath/ath9k/hw.h -+++ b/drivers/net/wireless/ath/ath9k/hw.h -@@ -688,10 +688,8 @@ struct ath_hw_ops { - bool power_off); - void (*rx_enable)(struct ath_hw *ah); - void (*set_desc_link)(void *ds, u32 link); -- bool (*calibrate)(struct ath_hw *ah, -- struct ath9k_channel *chan, -- u8 rxchainmask, -- bool longcal); -+ int (*calibrate)(struct ath_hw *ah, struct ath9k_channel *chan, -+ u8 rxchainmask, bool longcal); - bool (*get_isr)(struct ath_hw *ah, enum ath9k_int *masked, - u32 *sync_cause_p); - void (*set_txdesc)(struct ath_hw *ah, void *ds, ---- a/drivers/net/wireless/ath/ath9k/link.c -+++ b/drivers/net/wireless/ath/ath9k/link.c -@@ -371,9 +371,15 @@ void ath_ani_calibrate(unsigned long dat - - /* Perform calibration if necessary */ - if (longcal || shortcal) { -- common->ani.caldone = -- ath9k_hw_calibrate(ah, ah->curchan, -- ah->rxchainmask, longcal); -+ int ret = ath9k_hw_calibrate(ah, ah->curchan, ah->rxchainmask, -+ longcal); -+ if (ret < 0) { -+ common->ani.caldone = 0; -+ ath9k_queue_reset(sc, RESET_TYPE_CALIBRATION); -+ return; -+ } -+ -+ common->ani.caldone = ret; - } - - ath_dbg(common, ANI, diff --git a/package/kernel/mac80211/patches/331-ath9k_hw-do-not-run-NF-and-periodic-calibration-at-t.patch b/package/kernel/mac80211/patches/331-ath9k_hw-do-not-run-NF-and-periodic-calibration-at-t.patch deleted file mode 100644 index cd3c1d7800..0000000000 --- a/package/kernel/mac80211/patches/331-ath9k_hw-do-not-run-NF-and-periodic-calibration-at-t.patch +++ /dev/null @@ -1,63 +0,0 @@ -From: Felix Fietkau -Date: Sat, 18 Oct 2014 13:39:11 +0200 -Subject: [PATCH] ath9k_hw: do not run NF and periodic calibration at the - same time - -It can cause inconsistent calibration results or in some cases turn the -radio deaf. - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c -+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c -@@ -660,27 +660,26 @@ static void ar9002_hw_olc_temp_compensat - static int ar9002_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan, - u8 rxchainmask, bool longcal) - { -- bool iscaldone = true; - struct ath9k_cal_list *currCal = ah->cal_list_curr; -- bool nfcal, nfcal_pending = false; -+ bool nfcal, nfcal_pending = false, percal_pending; - int ret; - - nfcal = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF); - if (ah->caldata) - nfcal_pending = test_bit(NFCAL_PENDING, &ah->caldata->cal_flags); - -- if (currCal && !nfcal && -- (currCal->calState == CAL_RUNNING || -- currCal->calState == CAL_WAITING)) { -- iscaldone = ar9002_hw_per_calibration(ah, chan, -- rxchainmask, currCal); -- if (iscaldone) { -- ah->cal_list_curr = currCal = currCal->calNext; -- -- if (currCal->calState == CAL_WAITING) { -- iscaldone = false; -- ath9k_hw_reset_calibration(ah, currCal); -- } -+ percal_pending = (currCal && -+ (currCal->calState == CAL_RUNNING || -+ currCal->calState == CAL_WAITING)); -+ -+ if (percal_pending && !nfcal) { -+ if (!ar9002_hw_per_calibration(ah, chan, rxchainmask, currCal)) -+ return 0; -+ -+ ah->cal_list_curr = currCal = currCal->calNext; -+ if (currCal->calState == CAL_WAITING) { -+ ath9k_hw_reset_calibration(ah, currCal); -+ return 0; - } - } - -@@ -710,7 +709,7 @@ static int ar9002_hw_calibrate(struct at - } - } - -- return iscaldone; -+ return !percal_pending; - } - - /* Carrier leakage Calibration fix */ diff --git a/package/kernel/mac80211/patches/332-ath9k_hw-start-initial-NF-calibration-after-PA-calib.patch b/package/kernel/mac80211/patches/332-ath9k_hw-start-initial-NF-calibration-after-PA-calib.patch deleted file mode 100644 index 32ff5258f5..0000000000 --- a/package/kernel/mac80211/patches/332-ath9k_hw-start-initial-NF-calibration-after-PA-calib.patch +++ /dev/null @@ -1,36 +0,0 @@ -From: Felix Fietkau -Date: Sat, 18 Oct 2014 13:42:03 +0200 -Subject: [PATCH] ath9k_hw: start initial NF calibration after PA - calibration on ---- - ---- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c -+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c -@@ -856,6 +856,8 @@ static bool ar9002_hw_init_cal(struct at - - /* Do PA Calibration */ - ar9002_hw_pa_cal(ah, true); -+ ath9k_hw_loadnf(ah, chan); -+ ath9k_hw_start_nfcal(ah, true); - - if (ah->caldata) - set_bit(NFCAL_PENDING, &ah->caldata->cal_flags); ---- a/drivers/net/wireless/ath/ath9k/hw.c -+++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -1953,8 +1953,10 @@ int ath9k_hw_reset(struct ath_hw *ah, st - if (ath9k_hw_mci_is_enabled(ah)) - ar9003_mci_check_bt(ah); - -- ath9k_hw_loadnf(ah, chan); -- ath9k_hw_start_nfcal(ah, true); -+ if (AR_SREV_9300_20_OR_LATER(ah)) { -+ ath9k_hw_loadnf(ah, chan); -+ ath9k_hw_start_nfcal(ah, true); -+ } - - if (AR_SREV_9300_20_OR_LATER(ah)) - ar9003_hw_bb_watchdog_config(ah); diff --git a/package/kernel/mac80211/patches/333-ath9k-add-support-for-endian-swap-of-eeprom-from-pla.patch b/package/kernel/mac80211/patches/333-ath9k-add-support-for-endian-swap-of-eeprom-from-pla.patch deleted file mode 100644 index df1a710a1c..0000000000 --- a/package/kernel/mac80211/patches/333-ath9k-add-support-for-endian-swap-of-eeprom-from-pla.patch +++ /dev/null @@ -1,92 +0,0 @@ -From: Felix Fietkau -Date: Sat, 18 Oct 2014 18:24:15 +0200 -Subject: [PATCH] ath9k: add support for endian swap of eeprom from - platform data - -On some devices (especially little-endian ones), the flash EEPROM data -has a different endian, which needs to be detected. -Add a flag to the platform data to allow overriding that behavior - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/eeprom_def.c -+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c -@@ -262,7 +262,7 @@ static int ath9k_hw_def_check_eeprom(str - { - struct ar5416_eeprom_def *eep = &ah->eeprom.def; - struct ath_common *common = ath9k_hw_common(ah); -- u16 *eepdata, temp, magic, magic2; -+ u16 *eepdata, temp, magic; - u32 sum = 0, el; - bool need_swap = false; - int i, addr, size; -@@ -272,27 +272,16 @@ static int ath9k_hw_def_check_eeprom(str - return false; - } - -- if (!ath9k_hw_use_flash(ah)) { -- ath_dbg(common, EEPROM, "Read Magic = 0x%04X\n", magic); -- -- if (magic != AR5416_EEPROM_MAGIC) { -- magic2 = swab16(magic); -- -- if (magic2 == AR5416_EEPROM_MAGIC) { -- size = sizeof(struct ar5416_eeprom_def); -- need_swap = true; -- eepdata = (u16 *) (&ah->eeprom); -- -- for (addr = 0; addr < size / sizeof(u16); addr++) { -- temp = swab16(*eepdata); -- *eepdata = temp; -- eepdata++; -- } -- } else { -- ath_err(common, -- "Invalid EEPROM Magic. Endianness mismatch.\n"); -- return -EINVAL; -- } -+ if (swab16(magic) == AR5416_EEPROM_MAGIC && -+ !(ah->ah_flags & AH_NO_EEP_SWAP)) { -+ size = sizeof(struct ar5416_eeprom_def); -+ need_swap = true; -+ eepdata = (u16 *) (&ah->eeprom); -+ -+ for (addr = 0; addr < size / sizeof(u16); addr++) { -+ temp = swab16(*eepdata); -+ *eepdata = temp; -+ eepdata++; - } - } - ---- a/drivers/net/wireless/ath/ath9k/hw.h -+++ b/drivers/net/wireless/ath/ath9k/hw.h -@@ -731,6 +731,7 @@ enum ath_cal_list { - #define AH_USE_EEPROM 0x1 - #define AH_UNPLUGGED 0x2 /* The card has been physically removed. */ - #define AH_FASTCC 0x4 -+#define AH_NO_EEP_SWAP 0x8 /* Do not swap EEPROM data */ - - struct ath_hw { - struct ath_ops reg_ops; ---- a/drivers/net/wireless/ath/ath9k/init.c -+++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -531,6 +531,8 @@ static int ath9k_init_softc(u16 devid, s - ah->is_clk_25mhz = pdata->is_clk_25mhz; - ah->get_mac_revision = pdata->get_mac_revision; - ah->external_reset = pdata->external_reset; -+ if (!pdata->endian_check) -+ ah->ah_flags |= AH_NO_EEP_SWAP; - } - - common->ops = &ah->reg_ops; ---- a/include/linux/ath9k_platform.h -+++ b/include/linux/ath9k_platform.h -@@ -31,6 +31,7 @@ struct ath9k_platform_data { - u32 gpio_mask; - u32 gpio_val; - -+ bool endian_check; - bool is_clk_25mhz; - bool tx_gain_buffalo; - diff --git a/package/kernel/mac80211/patches/334-ath9k-allow-disabling-bands-via-platform-data.patch b/package/kernel/mac80211/patches/334-ath9k-allow-disabling-bands-via-platform-data.patch deleted file mode 100644 index f7185b0d74..0000000000 --- a/package/kernel/mac80211/patches/334-ath9k-allow-disabling-bands-via-platform-data.patch +++ /dev/null @@ -1,81 +0,0 @@ -From: Felix Fietkau -Date: Sat, 18 Oct 2014 18:27:23 +0200 -Subject: [PATCH] ath9k: allow disabling bands via platform data - -Some devices have multiple bands enables in the EEPROM data, even though -they are only calibrated for one. Allow platform data to disable -unsupported bands. - -Signed-off-by: Gabor Juhos -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/hw.c -+++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -2344,17 +2344,25 @@ int ath9k_hw_fill_cap_info(struct ath_hw - } - - eeval = ah->eep_ops->get_eeprom(ah, EEP_OP_MODE); -- if ((eeval & (AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A)) == 0) { -- ath_err(common, -- "no band has been marked as supported in EEPROM\n"); -- return -EINVAL; -+ -+ if (eeval & AR5416_OPFLAGS_11A) { -+ if (ah->disable_5ghz) -+ ath_warn(common, "disabling 5GHz band\n"); -+ else -+ pCap->hw_caps |= ATH9K_HW_CAP_5GHZ; - } - -- if (eeval & AR5416_OPFLAGS_11A) -- pCap->hw_caps |= ATH9K_HW_CAP_5GHZ; -+ if (eeval & AR5416_OPFLAGS_11G) { -+ if (ah->disable_2ghz) -+ ath_warn(common, "disabling 2GHz band\n"); -+ else -+ pCap->hw_caps |= ATH9K_HW_CAP_2GHZ; -+ } - -- if (eeval & AR5416_OPFLAGS_11G) -- pCap->hw_caps |= ATH9K_HW_CAP_2GHZ; -+ if ((pCap->hw_caps & (ATH9K_HW_CAP_2GHZ | ATH9K_HW_CAP_5GHZ)) == 0) { -+ ath_err(common, "both bands are disabled\n"); -+ return -EINVAL; -+ } - - if (AR_SREV_9485(ah) || - AR_SREV_9285(ah) || ---- a/drivers/net/wireless/ath/ath9k/hw.h -+++ b/drivers/net/wireless/ath/ath9k/hw.h -@@ -930,6 +930,8 @@ struct ath_hw { - bool is_clk_25mhz; - int (*get_mac_revision)(void); - int (*external_reset)(void); -+ bool disable_2ghz; -+ bool disable_5ghz; - - const struct firmware *eeprom_blob; - ---- a/drivers/net/wireless/ath/ath9k/init.c -+++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -531,6 +531,8 @@ static int ath9k_init_softc(u16 devid, s - ah->is_clk_25mhz = pdata->is_clk_25mhz; - ah->get_mac_revision = pdata->get_mac_revision; - ah->external_reset = pdata->external_reset; -+ ah->disable_2ghz = pdata->disable_2ghz; -+ ah->disable_5ghz = pdata->disable_5ghz; - if (!pdata->endian_check) - ah->ah_flags |= AH_NO_EEP_SWAP; - } ---- a/include/linux/ath9k_platform.h -+++ b/include/linux/ath9k_platform.h -@@ -34,6 +34,8 @@ struct ath9k_platform_data { - bool endian_check; - bool is_clk_25mhz; - bool tx_gain_buffalo; -+ bool disable_2ghz; -+ bool disable_5ghz; - - int (*get_mac_revision)(void); - int (*external_reset)(void); diff --git a/package/kernel/mac80211/patches/335-ath9k-use-a-random-MAC-address-if-the-EEPROM-address.patch b/package/kernel/mac80211/patches/335-ath9k-use-a-random-MAC-address-if-the-EEPROM-address.patch deleted file mode 100644 index ce6c0819d3..0000000000 --- a/package/kernel/mac80211/patches/335-ath9k-use-a-random-MAC-address-if-the-EEPROM-address.patch +++ /dev/null @@ -1,39 +0,0 @@ -From: Felix Fietkau -Date: Sat, 18 Oct 2014 18:31:49 +0200 -Subject: [PATCH] ath9k: use a random MAC address if the EEPROM address - is invalid - -Based on OpenWrt patch by Gabor Juhos - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/hw.c -+++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -19,6 +19,7 @@ - #include - #include - #include -+#include - #include - - #include "hw.h" -@@ -446,8 +447,16 @@ static int ath9k_hw_init_macaddr(struct - common->macaddr[2 * i] = eeval >> 8; - common->macaddr[2 * i + 1] = eeval & 0xff; - } -- if (sum == 0 || sum == 0xffff * 3) -- return -EADDRNOTAVAIL; -+ if (!is_valid_ether_addr(common->macaddr)) { -+ ath_err(common, -+ "eeprom contains invalid mac address: %pM\n", -+ common->macaddr); -+ -+ random_ether_addr(common->macaddr); -+ ath_err(common, -+ "random mac address will be used: %pM\n", -+ common->macaddr); -+ } - - return 0; - } diff --git a/package/kernel/mac80211/patches/336-ath9k-Enable-HW-queue-control-only-for-MCC.patch b/package/kernel/mac80211/patches/336-ath9k-Enable-HW-queue-control-only-for-MCC.patch deleted file mode 100644 index e721f36bad..0000000000 --- a/package/kernel/mac80211/patches/336-ath9k-Enable-HW-queue-control-only-for-MCC.patch +++ /dev/null @@ -1,145 +0,0 @@ -From: Sujith Manoharan -Date: Tue, 21 Oct 2014 19:23:02 +0530 -Subject: [PATCH] ath9k: Enable HW queue control only for MCC - -Enabling HW queue control for normal (non-mcc) mode -causes problems with queue management, resulting -in traffic stall. Since it is mainly required for -fairness in MCC mode, disable it for the general case. - -Bug: https://dev.openwrt.org/ticket/18164 - -Cc: Felix Fietkau -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/init.c -+++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -741,6 +741,32 @@ static const struct ieee80211_iface_comb - #endif - }; - -+#ifdef CPTCFG_ATH9K_CHANNEL_CONTEXT -+static void ath9k_set_mcc_capab(struct ath_softc *sc, struct ieee80211_hw *hw) -+{ -+ struct ath_hw *ah = sc->sc_ah; -+ struct ath_common *common = ath9k_hw_common(ah); -+ -+ if (!ath9k_is_chanctx_enabled()) -+ return; -+ -+ hw->flags |= IEEE80211_HW_QUEUE_CONTROL; -+ hw->queues = ATH9K_NUM_TX_QUEUES; -+ hw->offchannel_tx_hw_queue = hw->queues - 1; -+ hw->wiphy->interface_modes &= ~ BIT(NL80211_IFTYPE_WDS); -+ hw->wiphy->iface_combinations = if_comb_multi; -+ hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb_multi); -+ hw->wiphy->max_scan_ssids = 255; -+ hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; -+ hw->wiphy->max_remain_on_channel_duration = 10000; -+ hw->chanctx_data_size = sizeof(void *); -+ hw->extra_beacon_tailroom = -+ sizeof(struct ieee80211_p2p_noa_attr) + 9; -+ -+ ath_dbg(common, CHAN_CTX, "Use channel contexts\n"); -+} -+#endif /* CPTCFG_ATH9K_CHANNEL_CONTEXT */ -+ - static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) - { - struct ath_hw *ah = sc->sc_ah; -@@ -753,7 +779,6 @@ static void ath9k_set_hw_capab(struct at - IEEE80211_HW_SPECTRUM_MGMT | - IEEE80211_HW_REPORTS_TX_ACK_STATUS | - IEEE80211_HW_SUPPORTS_RC_TABLE | -- IEEE80211_HW_QUEUE_CONTROL | - IEEE80211_HW_SUPPORTS_HT_CCK_RATES; - - if (ath9k_ps_enable) -@@ -788,24 +813,6 @@ static void ath9k_set_hw_capab(struct at - hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb); - } - --#ifdef CPTCFG_ATH9K_CHANNEL_CONTEXT -- -- if (ath9k_is_chanctx_enabled()) { -- hw->wiphy->interface_modes &= ~ BIT(NL80211_IFTYPE_WDS); -- hw->wiphy->iface_combinations = if_comb_multi; -- hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb_multi); -- hw->wiphy->max_scan_ssids = 255; -- hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; -- hw->wiphy->max_remain_on_channel_duration = 10000; -- hw->chanctx_data_size = sizeof(void *); -- hw->extra_beacon_tailroom = -- sizeof(struct ieee80211_p2p_noa_attr) + 9; -- -- ath_dbg(common, CHAN_CTX, "Use channel contexts\n"); -- } -- --#endif /* CPTCFG_ATH9K_CHANNEL_CONTEXT */ -- - hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - - hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; -@@ -815,12 +822,7 @@ static void ath9k_set_hw_capab(struct at - hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH; - hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD; - -- /* allow 4 queues per channel context + -- * 1 cab queue + 1 offchannel tx queue -- */ -- hw->queues = ATH9K_NUM_TX_QUEUES; -- /* last queue for offchannel */ -- hw->offchannel_tx_hw_queue = hw->queues - 1; -+ hw->queues = 4; - hw->max_rates = 4; - hw->max_listen_interval = 10; - hw->max_rate_tries = 10; -@@ -844,6 +846,9 @@ static void ath9k_set_hw_capab(struct at - hw->wiphy->bands[IEEE80211_BAND_5GHZ] = - &common->sbands[IEEE80211_BAND_5GHZ]; - -+#ifdef CPTCFG_ATH9K_CHANNEL_CONTEXT -+ ath9k_set_mcc_capab(sc, hw); -+#endif - ath9k_init_wow(hw); - ath9k_cmn_reload_chainmask(ah); - ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -1181,6 +1181,9 @@ static void ath9k_assign_hw_queues(struc - { - int i; - -+ if (!ath9k_is_chanctx_enabled()) -+ return; -+ - for (i = 0; i < IEEE80211_NUM_ACS; i++) - vif->hw_queue[i] = i; - ---- a/drivers/net/wireless/ath/ath9k/xmit.c -+++ b/drivers/net/wireless/ath/ath9k/xmit.c -@@ -169,7 +169,10 @@ static void ath_txq_skb_done(struct ath_ - - if (txq->stopped && - txq->pending_frames < sc->tx.txq_max_pending[q]) { -- ieee80211_wake_queue(sc->hw, info->hw_queue); -+ if (ath9k_is_chanctx_enabled()) -+ ieee80211_wake_queue(sc->hw, info->hw_queue); -+ else -+ ieee80211_wake_queue(sc->hw, q); - txq->stopped = false; - } - } -@@ -2247,7 +2250,10 @@ int ath_tx_start(struct ieee80211_hw *hw - fi->txq = q; - if (++txq->pending_frames > sc->tx.txq_max_pending[q] && - !txq->stopped) { -- ieee80211_stop_queue(sc->hw, info->hw_queue); -+ if (ath9k_is_chanctx_enabled()) -+ ieee80211_stop_queue(sc->hw, info->hw_queue); -+ else -+ ieee80211_stop_queue(sc->hw, q); - txq->stopped = true; - } - } diff --git a/package/kernel/mac80211/patches/337-ath-use-CTL-region-from-cfg80211-if-unset-in-EEPROM.patch b/package/kernel/mac80211/patches/337-ath-use-CTL-region-from-cfg80211-if-unset-in-EEPROM.patch deleted file mode 100644 index f451912aea..0000000000 --- a/package/kernel/mac80211/patches/337-ath-use-CTL-region-from-cfg80211-if-unset-in-EEPROM.patch +++ /dev/null @@ -1,56 +0,0 @@ -From: Felix Fietkau -Date: Wed, 22 Oct 2014 15:21:22 +0200 -Subject: [PATCH] ath: use CTL region from cfg80211 if unset in EEPROM - -Many AP devices do not have the proper regulatory domain programmed in -EEPROM. Instead they expect the software to set the appropriate region. -For these devices, the country code defaults to US, and the driver uses -the US CTL tables as well. -On devices bought in Europe this can lead to tx power being set too high -on the band edges, even if the cfg80211 regdomain is set correctly. -Fix this issue by taking into account the DFS region, but only when the -EEPROM regdomain is set to default. - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath.h -+++ b/drivers/net/wireless/ath/ath.h -@@ -80,6 +80,7 @@ struct reg_dmn_pair_mapping { - - struct ath_regulatory { - char alpha2[2]; -+ enum nl80211_dfs_regions region; - u16 country_code; - u16 max_power_level; - u16 current_rd; ---- a/drivers/net/wireless/ath/regd.c -+++ b/drivers/net/wireless/ath/regd.c -@@ -515,6 +515,7 @@ void ath_reg_notifier_apply(struct wiphy - if (!request) - return; - -+ reg->region = request->dfs_region; - switch (request->initiator) { - case NL80211_REGDOM_SET_BY_CORE: - /* -@@ -779,6 +780,19 @@ u32 ath_regd_get_band_ctl(struct ath_reg - return SD_NO_CTL; - } - -+ if (ath_regd_get_eepromRD(reg) == CTRY_DEFAULT) { -+ switch (reg->region) { -+ case NL80211_DFS_FCC: -+ return CTL_FCC; -+ case NL80211_DFS_ETSI: -+ return CTL_ETSI; -+ case NL80211_DFS_JP: -+ return CTL_MKK; -+ default: -+ break; -+ } -+ } -+ - switch (band) { - case IEEE80211_BAND_2GHZ: - return reg->regpair->reg_2ghz_ctl; diff --git a/package/kernel/mac80211/patches/338-ath9k-Update-AR9580-initvals.patch b/package/kernel/mac80211/patches/338-ath9k-Update-AR9580-initvals.patch deleted file mode 100644 index af69b06571..0000000000 --- a/package/kernel/mac80211/patches/338-ath9k-Update-AR9580-initvals.patch +++ /dev/null @@ -1,162 +0,0 @@ -From: Sujith Manoharan -Date: Wed, 22 Oct 2014 12:21:44 +0530 -Subject: [PATCH] ath9k: Update AR9580 initvals - -This fixes RX sensitivity issues with AR9580. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h -+++ b/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h -@@ -24,7 +24,149 @@ - - #define ar9580_1p0_soc_postamble ar9300_2p2_soc_postamble - --#define ar9580_1p0_radio_core ar9300_2p2_radio_core -+static const u32 ar9580_1p0_radio_core[][2] = { -+ /* Addr allmodes */ -+ {0x00016000, 0x36db2db6}, -+ {0x00016004, 0x6db6db40}, -+ {0x00016008, 0x73f00000}, -+ {0x0001600c, 0x00000000}, -+ {0x00016040, 0x7f80fff8}, -+ {0x0001604c, 0x76d005b5}, -+ {0x00016050, 0x556cf031}, -+ {0x00016054, 0x13449440}, -+ {0x00016058, 0x0c51c92c}, -+ {0x0001605c, 0x3db7fffc}, -+ {0x00016060, 0xfffffffc}, -+ {0x00016064, 0x000f0278}, -+ {0x0001606c, 0x6db60000}, -+ {0x00016080, 0x00000000}, -+ {0x00016084, 0x0e48048c}, -+ {0x00016088, 0x54214514}, -+ {0x0001608c, 0x119f481e}, -+ {0x00016090, 0x24926490}, -+ {0x00016098, 0xd2888888}, -+ {0x000160a0, 0x0a108ffe}, -+ {0x000160a4, 0x812fc370}, -+ {0x000160a8, 0x423c8000}, -+ {0x000160b4, 0x92480080}, -+ {0x000160c0, 0x00adb6d0}, -+ {0x000160c4, 0x6db6db60}, -+ {0x000160c8, 0x6db6db6c}, -+ {0x000160cc, 0x01e6c000}, -+ {0x00016100, 0x3fffbe01}, -+ {0x00016104, 0xfff80000}, -+ {0x00016108, 0x00080010}, -+ {0x00016144, 0x02084080}, -+ {0x00016148, 0x00000000}, -+ {0x00016280, 0x058a0001}, -+ {0x00016284, 0x3d840208}, -+ {0x00016288, 0x05a20408}, -+ {0x0001628c, 0x00038c07}, -+ {0x00016290, 0x00000004}, -+ {0x00016294, 0x458a214f}, -+ {0x00016380, 0x00000000}, -+ {0x00016384, 0x00000000}, -+ {0x00016388, 0x00800700}, -+ {0x0001638c, 0x00800700}, -+ {0x00016390, 0x00800700}, -+ {0x00016394, 0x00000000}, -+ {0x00016398, 0x00000000}, -+ {0x0001639c, 0x00000000}, -+ {0x000163a0, 0x00000001}, -+ {0x000163a4, 0x00000001}, -+ {0x000163a8, 0x00000000}, -+ {0x000163ac, 0x00000000}, -+ {0x000163b0, 0x00000000}, -+ {0x000163b4, 0x00000000}, -+ {0x000163b8, 0x00000000}, -+ {0x000163bc, 0x00000000}, -+ {0x000163c0, 0x000000a0}, -+ {0x000163c4, 0x000c0000}, -+ {0x000163c8, 0x14021402}, -+ {0x000163cc, 0x00001402}, -+ {0x000163d0, 0x00000000}, -+ {0x000163d4, 0x00000000}, -+ {0x00016400, 0x36db2db6}, -+ {0x00016404, 0x6db6db40}, -+ {0x00016408, 0x73f00000}, -+ {0x0001640c, 0x00000000}, -+ {0x00016440, 0x7f80fff8}, -+ {0x0001644c, 0x76d005b5}, -+ {0x00016450, 0x556cf031}, -+ {0x00016454, 0x13449440}, -+ {0x00016458, 0x0c51c92c}, -+ {0x0001645c, 0x3db7fffc}, -+ {0x00016460, 0xfffffffc}, -+ {0x00016464, 0x000f0278}, -+ {0x0001646c, 0x6db60000}, -+ {0x00016500, 0x3fffbe01}, -+ {0x00016504, 0xfff80000}, -+ {0x00016508, 0x00080010}, -+ {0x00016544, 0x02084080}, -+ {0x00016548, 0x00000000}, -+ {0x00016780, 0x00000000}, -+ {0x00016784, 0x00000000}, -+ {0x00016788, 0x00800700}, -+ {0x0001678c, 0x00800700}, -+ {0x00016790, 0x00800700}, -+ {0x00016794, 0x00000000}, -+ {0x00016798, 0x00000000}, -+ {0x0001679c, 0x00000000}, -+ {0x000167a0, 0x00000001}, -+ {0x000167a4, 0x00000001}, -+ {0x000167a8, 0x00000000}, -+ {0x000167ac, 0x00000000}, -+ {0x000167b0, 0x00000000}, -+ {0x000167b4, 0x00000000}, -+ {0x000167b8, 0x00000000}, -+ {0x000167bc, 0x00000000}, -+ {0x000167c0, 0x000000a0}, -+ {0x000167c4, 0x000c0000}, -+ {0x000167c8, 0x14021402}, -+ {0x000167cc, 0x00001402}, -+ {0x000167d0, 0x00000000}, -+ {0x000167d4, 0x00000000}, -+ {0x00016800, 0x36db2db6}, -+ {0x00016804, 0x6db6db40}, -+ {0x00016808, 0x73f00000}, -+ {0x0001680c, 0x00000000}, -+ {0x00016840, 0x7f80fff8}, -+ {0x0001684c, 0x76d005b5}, -+ {0x00016850, 0x556cf031}, -+ {0x00016854, 0x13449440}, -+ {0x00016858, 0x0c51c92c}, -+ {0x0001685c, 0x3db7fffc}, -+ {0x00016860, 0xfffffffc}, -+ {0x00016864, 0x000f0278}, -+ {0x0001686c, 0x6db60000}, -+ {0x00016900, 0x3fffbe01}, -+ {0x00016904, 0xfff80000}, -+ {0x00016908, 0x00080010}, -+ {0x00016944, 0x02084080}, -+ {0x00016948, 0x00000000}, -+ {0x00016b80, 0x00000000}, -+ {0x00016b84, 0x00000000}, -+ {0x00016b88, 0x00800700}, -+ {0x00016b8c, 0x00800700}, -+ {0x00016b90, 0x00800700}, -+ {0x00016b94, 0x00000000}, -+ {0x00016b98, 0x00000000}, -+ {0x00016b9c, 0x00000000}, -+ {0x00016ba0, 0x00000001}, -+ {0x00016ba4, 0x00000001}, -+ {0x00016ba8, 0x00000000}, -+ {0x00016bac, 0x00000000}, -+ {0x00016bb0, 0x00000000}, -+ {0x00016bb4, 0x00000000}, -+ {0x00016bb8, 0x00000000}, -+ {0x00016bbc, 0x00000000}, -+ {0x00016bc0, 0x000000a0}, -+ {0x00016bc4, 0x000c0000}, -+ {0x00016bc8, 0x14021402}, -+ {0x00016bcc, 0x00001402}, -+ {0x00016bd0, 0x00000000}, -+ {0x00016bd4, 0x00000000}, -+}; - - #define ar9580_1p0_mac_postamble ar9300_2p2_mac_postamble - diff --git a/package/kernel/mac80211/patches/339-ath9k-Update-AR955x-initvals.patch b/package/kernel/mac80211/patches/339-ath9k-Update-AR955x-initvals.patch deleted file mode 100644 index 04dca910cc..0000000000 --- a/package/kernel/mac80211/patches/339-ath9k-Update-AR955x-initvals.patch +++ /dev/null @@ -1,37 +0,0 @@ -From: Sujith Manoharan -Date: Wed, 22 Oct 2014 12:21:45 +0530 -Subject: [PATCH] ath9k: Update AR955x initvals - -* Fix a 11b/EVM issue by adjusting - FIR filter coefficients. - -* Fix a problem with receiving probe request - frames sent at 11b rate. - -Signed-off-by: Sujith Manoharan ---- - ---- a/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h -+++ b/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h -@@ -507,7 +507,7 @@ static const u32 ar955x_1p0_baseband_cor - {0x00009d04, 0x40206c10}, - {0x00009d08, 0x009c4060}, - {0x00009d0c, 0x9883800a}, -- {0x00009d10, 0x01834061}, -+ {0x00009d10, 0x01884061}, - {0x00009d14, 0x00c0040b}, - {0x00009d18, 0x00000000}, - {0x00009e08, 0x0038230c}, -@@ -545,9 +545,9 @@ static const u32 ar955x_1p0_baseband_cor - {0x0000a370, 0x00000000}, - {0x0000a390, 0x00000001}, - {0x0000a394, 0x00000444}, -- {0x0000a398, 0x1f020503}, -- {0x0000a39c, 0x29180c03}, -- {0x0000a3a0, 0x9a8b6844}, -+ {0x0000a398, 0x001f0e0f}, -+ {0x0000a39c, 0x0075393f}, -+ {0x0000a3a0, 0xb79f6427}, - {0x0000a3a4, 0x00000000}, - {0x0000a3a8, 0xaaaaaaaa}, - {0x0000a3ac, 0x3c466478}, diff --git a/package/kernel/mac80211/patches/340-mac80211-add-support-for-driver-tx-power-reporting.patch b/package/kernel/mac80211/patches/340-mac80211-add-support-for-driver-tx-power-reporting.patch deleted file mode 100644 index 6998584a59..0000000000 --- a/package/kernel/mac80211/patches/340-mac80211-add-support-for-driver-tx-power-reporting.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: Felix Fietkau -Date: Wed, 22 Oct 2014 17:55:50 +0200 -Subject: [PATCH] mac80211: add support for driver tx power reporting - -The configured tx power is often limited by hardware capabilities, -channel settings, antenna configuration, etc. - -Signed-off-by: Felix Fietkau ---- - ---- a/include/net/mac80211.h -+++ b/include/net/mac80211.h -@@ -2838,6 +2838,9 @@ enum ieee80211_roc_type { - * @get_expected_throughput: extract the expected throughput towards the - * specified station. The returned value is expressed in Kbps. It returns 0 - * if the RC algorithm does not have proper data to provide. -+ * -+ * @get_txpower: get current maximum tx power (in dBm) based on configuration -+ * and hardware limits. - */ - struct ieee80211_ops { - void (*tx)(struct ieee80211_hw *hw, -@@ -3039,6 +3042,8 @@ struct ieee80211_ops { - int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); - void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); - u32 (*get_expected_throughput)(struct ieee80211_sta *sta); -+ int (*get_txpower)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, -+ int *dbm); - }; - - /** ---- a/net/mac80211/cfg.c -+++ b/net/mac80211/cfg.c -@@ -2081,6 +2081,9 @@ static int ieee80211_get_tx_power(struct - struct ieee80211_local *local = wiphy_priv(wiphy); - struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); - -+ if (local->ops->get_txpower) -+ return local->ops->get_txpower(&local->hw, &sdata->vif, dbm); -+ - if (!local->use_chanctx) - *dbm = local->hw.conf.power_level; - else diff --git a/package/kernel/mac80211/patches/341-ath9k_common-always-update-value-in-ath9k_cmn_update.patch b/package/kernel/mac80211/patches/341-ath9k_common-always-update-value-in-ath9k_cmn_update.patch deleted file mode 100644 index 625bd425b4..0000000000 --- a/package/kernel/mac80211/patches/341-ath9k_common-always-update-value-in-ath9k_cmn_update.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: Felix Fietkau -Date: Wed, 22 Oct 2014 18:16:14 +0200 -Subject: [PATCH] ath9k_common: always update value in - ath9k_cmn_update_txpow - -In some cases the limit may be the same as reg->power_limit, but the -actual value that the hardware uses is not up to date. In that case, a -wrong value for current tx power is tracked internally. -Fix this by unconditionally updating it. - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/common.c -+++ b/drivers/net/wireless/ath/ath9k/common.c -@@ -368,11 +368,11 @@ void ath9k_cmn_update_txpow(struct ath_h - { - struct ath_regulatory *reg = ath9k_hw_regulatory(ah); - -- if (reg->power_limit != new_txpow) { -+ if (reg->power_limit != new_txpow) - ath9k_hw_set_txpowerlimit(ah, new_txpow, false); -- /* read back in case value is clamped */ -- *txpower = reg->max_power_level; -- } -+ -+ /* read back in case value is clamped */ -+ *txpower = reg->max_power_level; - } - EXPORT_SYMBOL(ath9k_cmn_update_txpow); - diff --git a/package/kernel/mac80211/patches/344-rtl8192cu-Fix-for-rtlwifi-s-bluetooth-coexist-functi.patch b/package/kernel/mac80211/patches/344-rtl8192cu-Fix-for-rtlwifi-s-bluetooth-coexist-functi.patch deleted file mode 100644 index 666caea7fe..0000000000 --- a/package/kernel/mac80211/patches/344-rtl8192cu-Fix-for-rtlwifi-s-bluetooth-coexist-functi.patch +++ /dev/null @@ -1,34 +0,0 @@ -From: Karsten Wiese -Date: Wed, 22 Oct 2014 15:47:32 +0200 -Subject: [PATCH] rtl8192cu: Fix for rtlwifi's bluetooth coexist - functionality - -Initialize function pointer with a function indicating bt coexist is not there. -Prevents Ooops. - -Signed-off-by: Karsten Wiese ---- - ---- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c -+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c -@@ -101,6 +101,12 @@ static void rtl92cu_deinit_sw_vars(struc - } - } - -+/* get bt coexist status */ -+static bool rtl92cu_get_btc_status(void) -+{ -+ return false; -+} -+ - static struct rtl_hal_ops rtl8192cu_hal_ops = { - .init_sw_vars = rtl92cu_init_sw_vars, - .deinit_sw_vars = rtl92cu_deinit_sw_vars, -@@ -148,6 +154,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ - .phy_set_bw_mode_callback = rtl92cu_phy_set_bw_mode_callback, - .dm_dynamic_txpower = rtl92cu_dm_dynamic_txpower, - .fill_h2c_cmd = rtl92c_fill_h2c_cmd, -+ .get_btc_status = rtl92cu_get_btc_status, - }; - - static struct rtl_mod_params rtl92cu_mod_params = { diff --git a/package/kernel/mac80211/patches/345-rtl8192cu-Call-ieee80211_register_hw-from-rtl_usb_pr.patch b/package/kernel/mac80211/patches/345-rtl8192cu-Call-ieee80211_register_hw-from-rtl_usb_pr.patch deleted file mode 100644 index b4166243d8..0000000000 --- a/package/kernel/mac80211/patches/345-rtl8192cu-Call-ieee80211_register_hw-from-rtl_usb_pr.patch +++ /dev/null @@ -1,33 +0,0 @@ -From: Karsten Wiese -Date: Wed, 22 Oct 2014 15:47:33 +0200 -Subject: [PATCH] rtl8192cu: Call ieee80211_register_hw from rtl_usb_probe - -In a previous patch the call to ieee80211_register_hw was moved from the -load firmware callback to the rtl_pci_probe only. -rt8192cu also uses this callback. Currently it doesnt create a wlan%d device. -Fill in the call to ieee80211_register_hw in rtl_usb_probe. - -Signed-off-by: Karsten Wiese ---- - ---- a/drivers/net/wireless/rtlwifi/usb.c -+++ b/drivers/net/wireless/rtlwifi/usb.c -@@ -1117,7 +1117,18 @@ int rtl_usb_probe(struct usb_interface * - } - rtlpriv->cfg->ops->init_sw_leds(hw); - -+ err = ieee80211_register_hw(hw); -+ if (err) { -+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, -+ "Can't register mac80211 hw.\n"); -+ err = -ENODEV; -+ goto error_out; -+ } -+ rtlpriv->mac80211.mac80211_registered = 1; -+ -+ set_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status); - return 0; -+ - error_out: - rtl_deinit_core(hw); - _rtl_usb_io_handler_release(hw); diff --git a/package/kernel/mac80211/patches/346-rtl8192cu-Prevent-Ooops-under-rtl92c_set_fw_rsvdpage.patch b/package/kernel/mac80211/patches/346-rtl8192cu-Prevent-Ooops-under-rtl92c_set_fw_rsvdpage.patch deleted file mode 100644 index 38f0b3462b..0000000000 --- a/package/kernel/mac80211/patches/346-rtl8192cu-Prevent-Ooops-under-rtl92c_set_fw_rsvdpage.patch +++ /dev/null @@ -1,107 +0,0 @@ -From: Karsten Wiese -Date: Wed, 22 Oct 2014 15:47:34 +0200 -Subject: [PATCH] rtl8192cu: Prevent Ooops under rtl92c_set_fw_rsvdpagepkt - -rtl92c_set_fw_rsvdpagepkt is used by rtl8192cu and its pci sibling rtl8192ce. -rtl_cmd_send_packet crashes when called inside rtl8192cu because it works on -memory allocated only by rtl8192ce. -Fix the crash by calling a dummy function when used in rtl8192cu. -Comparision with the realtek vendor driver makes me think, something is missing in -the dummy function. -Short test as WPA2 station show good results connected to an 802.11g basestation. -Traffic stops after few MBytes as WPA2 station connected to an 802.11n basestation. - -Signed-off-by: Karsten Wiese ---- - ---- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c -+++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c -@@ -656,7 +656,8 @@ static u8 reserved_page_packet[TOTAL_RES - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - }; - --void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished) -+void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, -+ bool (*cmd_send_packet)(struct ieee80211_hw *, struct sk_buff *)) - { - struct rtl_priv *rtlpriv = rtl_priv(hw); - struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); -@@ -722,7 +723,10 @@ void rtl92c_set_fw_rsvdpagepkt(struct ie - memcpy((u8 *)skb_put(skb, totalpacketlen), - &reserved_page_packet, totalpacketlen); - -- rtstatus = rtl_cmd_send_packet(hw, skb); -+ if (cmd_send_packet) -+ rtstatus = cmd_send_packet(hw, skb); -+ else -+ rtstatus = rtl_cmd_send_packet(hw, skb); - - if (rtstatus) - b_dlok = true; ---- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h -+++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h -@@ -109,7 +109,9 @@ void rtl92c_fill_h2c_cmd(struct ieee8021 - u32 cmd_len, u8 *p_cmdbuffer); - void rtl92c_firmware_selfreset(struct ieee80211_hw *hw); - void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode); --void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished); -+void rtl92c_set_fw_rsvdpagepkt -+ (struct ieee80211_hw *hw, -+ bool (*cmd_send_packet)(struct ieee80211_hw *, struct sk_buff *)); - void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus); - void usb_writeN_async(struct rtl_priv *rtlpriv, u32 addr, void *data, u16 len); - void rtl92c_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state); ---- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c -+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c -@@ -459,7 +459,7 @@ void rtl92ce_set_hw_reg(struct ieee80211 - rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, - tmp_reg422 & (~BIT(6))); - -- rtl92c_set_fw_rsvdpagepkt(hw, 0); -+ rtl92c_set_fw_rsvdpagepkt(hw, NULL); - - _rtl92ce_set_bcn_ctrl_reg(hw, BIT(3), 0); - _rtl92ce_set_bcn_ctrl_reg(hw, 0, BIT(4)); ---- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c -+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c -@@ -1592,6 +1592,20 @@ void rtl92cu_get_hw_reg(struct ieee80211 - } - } - -+bool usb_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb) -+{ -+ /* Currently nothing happens here. -+ * Traffic stops after some seconds in WPA2 802.11n mode. -+ * Maybe because rtl8192cu chip should be set from here? -+ * If I understand correctly, the realtek vendor driver sends some urbs -+ * if its "here". -+ * -+ * This is maybe necessary: -+ * rtlpriv->cfg->ops->fill_tx_cmddesc(hw, buffer, 1, 1, skb); -+ */ -+ return true; -+} -+ - void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) - { - struct rtl_priv *rtlpriv = rtl_priv(hw); -@@ -1939,7 +1953,8 @@ void rtl92cu_set_hw_reg(struct ieee80211 - recover = true; - rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, - tmp_reg422 & (~BIT(6))); -- rtl92c_set_fw_rsvdpagepkt(hw, 0); -+ rtl92c_set_fw_rsvdpagepkt(hw, -+ &usb_cmd_send_packet); - _rtl92cu_set_bcn_ctrl_reg(hw, BIT(3), 0); - _rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4)); - if (recover) ---- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h -+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h -@@ -104,7 +104,6 @@ bool rtl92cu_gpio_radio_on_off_checking( - void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid); - int rtl92c_download_fw(struct ieee80211_hw *hw); - void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode); --void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool dl_finished); - void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus); - void rtl92c_fill_h2c_cmd(struct ieee80211_hw *hw, - u8 element_id, u32 cmd_len, u8 *p_cmdbuffer); diff --git a/package/kernel/mac80211/patches/347-mac80211-flush-keys-for-AP-mode-on-ieee80211_do_stop.patch b/package/kernel/mac80211/patches/347-mac80211-flush-keys-for-AP-mode-on-ieee80211_do_stop.patch deleted file mode 100644 index 94cd7c112c..0000000000 --- a/package/kernel/mac80211/patches/347-mac80211-flush-keys-for-AP-mode-on-ieee80211_do_stop.patch +++ /dev/null @@ -1,23 +0,0 @@ -From: Felix Fietkau -Date: Mon, 27 Oct 2014 11:50:28 +0100 -Subject: [PATCH] mac80211: flush keys for AP mode on ieee80211_do_stop - -Userspace can add keys to an AP mode interface before start_ap has been -called. If there have been no calls to start_ap/stop_ap in the mean -time, the keys will still be around when the interface is brought down. - -Signed-off-by: Felix Fietkau ---- - ---- a/net/mac80211/iface.c -+++ b/net/mac80211/iface.c -@@ -931,9 +931,6 @@ static void ieee80211_do_stop(struct iee - * another CPU. - */ - ieee80211_free_keys(sdata, true); -- -- /* fall through */ -- case NL80211_IFTYPE_AP: - skb_queue_purge(&sdata->skb_queue); - } - diff --git a/package/kernel/mac80211/patches/352-mac80211-fix-use-after-free-in-defragmentation.patch b/package/kernel/mac80211/patches/352-mac80211-fix-use-after-free-in-defragmentation.patch deleted file mode 100644 index f7472e0a4e..0000000000 --- a/package/kernel/mac80211/patches/352-mac80211-fix-use-after-free-in-defragmentation.patch +++ /dev/null @@ -1,50 +0,0 @@ -From: Johannes Berg -Date: Mon, 3 Nov 2014 14:29:09 +0100 -Subject: [PATCH] mac80211: fix use-after-free in defragmentation - -Upon receiving the last fragment, all but the first fragment -are freed, but the multicast check for statistics at the end -of the function refers to the current skb (the last fragment) -causing a use-after-free bug. - -Since multicast frames cannot be fragmented and we check for -this early in the function, just modify that check to also -do the accounting to fix the issue. - -Cc: stable@vger.kernel.org -Reported-by: Yosef Khyal -Signed-off-by: Johannes Berg ---- - ---- a/net/mac80211/rx.c -+++ b/net/mac80211/rx.c -@@ -1678,11 +1678,14 @@ ieee80211_rx_h_defragment(struct ieee802 - sc = le16_to_cpu(hdr->seq_ctrl); - frag = sc & IEEE80211_SCTL_FRAG; - -- if (likely((!ieee80211_has_morefrags(fc) && frag == 0) || -- is_multicast_ether_addr(hdr->addr1))) { -- /* not fragmented */ -+ if (likely(!ieee80211_has_morefrags(fc) && frag == 0)) -+ goto out; -+ -+ if (is_multicast_ether_addr(hdr->addr1)) { -+ rx->local->dot11MulticastReceivedFrameCount++; - goto out; - } -+ - I802_DEBUG_INC(rx->local->rx_handlers_fragments); - - if (skb_linearize(rx->skb)) -@@ -1775,10 +1778,7 @@ ieee80211_rx_h_defragment(struct ieee802 - out: - if (rx->sta) - rx->sta->rx_packets++; -- if (is_multicast_ether_addr(hdr->addr1)) -- rx->local->dot11MulticastReceivedFrameCount++; -- else -- ieee80211_led_rx(rx->local); -+ ieee80211_led_rx(rx->local); - return RX_CONTINUE; - } - diff --git a/package/kernel/mac80211/patches/402-ath_regd_optional.patch b/package/kernel/mac80211/patches/402-ath_regd_optional.patch index 73c8828c36..3c1bfeeb5e 100644 --- a/package/kernel/mac80211/patches/402-ath_regd_optional.patch +++ b/package/kernel/mac80211/patches/402-ath_regd_optional.patch @@ -59,7 +59,7 @@ ---help--- --- a/.local-symbols +++ b/.local-symbols -@@ -112,6 +112,7 @@ RTL8187_LEDS= +@@ -116,6 +116,7 @@ RTL8187_LEDS= ATH_COMMON= ATH_CARDS= ATH_DEBUG= diff --git a/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch b/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch index 3ae92a688a..d2c6c5fc30 100644 --- a/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch +++ b/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch @@ -11,7 +11,7 @@ drivers/net/wireless/ath/ath5k/debug.c | 86 ++++++++++++++++++++++++++++++++ --- a/drivers/net/wireless/ath/ath5k/debug.c +++ b/drivers/net/wireless/ath/ath5k/debug.c -@@ -822,6 +822,97 @@ static const struct file_operations fops +@@ -823,6 +823,97 @@ static const struct file_operations fops .llseek = default_llseek, }; @@ -109,7 +109,7 @@ drivers/net/wireless/ath/ath5k/debug.c | 86 ++++++++++++++++++++++++++++++++ /* debugfs: queues etc */ -@@ -1009,6 +1100,9 @@ ath5k_debug_init_device(struct ath5k_hw +@@ -1010,6 +1101,9 @@ ath5k_debug_init_device(struct ath5k_hw debugfs_create_file("beacon", S_IWUSR | S_IRUSR, phydir, ah, &fops_beacon); diff --git a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch index a6119c5544..32fde8fc1b 100644 --- a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch +++ b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch @@ -1,6 +1,6 @@ --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h -@@ -2214,6 +2214,7 @@ struct cfg80211_qos_map { +@@ -2245,6 +2245,7 @@ struct cfg80211_qos_map { * (as advertised by the nl80211 feature flag.) * @get_tx_power: store the current TX power into the dbm variable; * return 0 if successful @@ -8,7 +8,7 @@ * * @set_wds_peer: set the WDS peer for a WDS interface * -@@ -2450,6 +2451,7 @@ struct cfg80211_ops { +@@ -2495,6 +2496,7 @@ struct cfg80211_ops { enum nl80211_tx_power_setting type, int mbm); int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, int *dbm); @@ -18,7 +18,7 @@ const u8 *addr); --- a/include/net/mac80211.h +++ b/include/net/mac80211.h -@@ -1075,6 +1075,7 @@ enum ieee80211_smps_mode { +@@ -1078,6 +1078,7 @@ enum ieee80211_smps_mode { * * @power_level: requested transmit power (in dBm), backward compatibility * value only that is set to the minimum of all interfaces @@ -26,7 +26,7 @@ * * @chandef: the channel definition to tune to * @radar_enabled: whether radar detection is enabled -@@ -1096,6 +1097,7 @@ struct ieee80211_conf { +@@ -1099,6 +1100,7 @@ struct ieee80211_conf { u32 flags; int power_level, dynamic_ps_timeout; int max_sleep_period; @@ -36,7 +36,7 @@ u8 ps_dtim_period; --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h -@@ -1638,6 +1638,9 @@ enum nl80211_commands { +@@ -1656,6 +1656,9 @@ enum nl80211_commands { * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see * &enum nl80211_smps_mode. * @@ -46,7 +46,7 @@ * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ -@@ -1990,6 +1993,8 @@ enum nl80211_attrs { +@@ -2008,6 +2011,8 @@ enum nl80211_attrs { NL80211_ATTR_SMPS_MODE, @@ -57,7 +57,7 @@ __NL80211_ATTR_AFTER_LAST, --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c -@@ -2091,6 +2091,19 @@ static int ieee80211_get_tx_power(struct +@@ -2155,6 +2155,19 @@ static int ieee80211_get_tx_power(struct return 0; } @@ -77,7 +77,7 @@ static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev, const u8 *addr) { -@@ -3572,6 +3585,7 @@ const struct cfg80211_ops mac80211_confi +@@ -3723,6 +3736,7 @@ const struct cfg80211_ops mac80211_confi .set_wiphy_params = ieee80211_set_wiphy_params, .set_tx_power = ieee80211_set_tx_power, .get_tx_power = ieee80211_get_tx_power, @@ -87,7 +87,7 @@ CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd) --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h -@@ -1280,6 +1280,7 @@ struct ieee80211_local { +@@ -1330,6 +1330,7 @@ struct ieee80211_local { int dynamic_ps_forced_timeout; int user_power_level; /* in dBm, for all interfaces */ @@ -119,7 +119,7 @@ if (local->hw.conf.power_level != power) { changed |= IEEE80211_CONF_CHANGE_POWER; local->hw.conf.power_level = power; -@@ -585,6 +591,7 @@ struct ieee80211_hw *ieee80211_alloc_hw( +@@ -578,6 +584,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_ IEEE80211_RADIOTAP_MCS_HAVE_BW; local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI | IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH; @@ -137,7 +137,7 @@ }; /* policy for the key attributes */ -@@ -2179,6 +2180,20 @@ static int nl80211_set_wiphy(struct sk_b +@@ -2184,6 +2185,20 @@ static int nl80211_set_wiphy(struct sk_b return result; } diff --git a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch index 304eb7dc8a..9d789b40a7 100644 --- a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch +++ b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch @@ -18,7 +18,7 @@ void (*spectral_scan_trigger)(struct ath_hw *ah); --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c -@@ -1796,6 +1796,26 @@ static void ar9003_hw_tx99_set_txpower(s +@@ -1799,6 +1799,26 @@ static void ar9003_hw_tx99_set_txpower(s ATH9K_POW_SM(p_pwr_array[ALL_TARGET_HT40_14], 0)); } @@ -45,7 +45,7 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); -@@ -1831,6 +1851,7 @@ void ar9003_hw_attach_phy_ops(struct ath +@@ -1834,6 +1854,7 @@ void ar9003_hw_attach_phy_ops(struct ath priv_ops->set_radar_params = ar9003_hw_set_radar_params; priv_ops->fast_chan_change = ar9003_hw_fast_chan_change; @@ -110,7 +110,7 @@ static inline void ath9k_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable) --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c -@@ -1232,9 +1232,30 @@ static void ar5008_hw_set_radar_conf(str +@@ -1235,9 +1235,30 @@ static void ar5008_hw_set_radar_conf(str conf->radar_inband = 8; } @@ -141,7 +141,7 @@ static const u32 ar5416_cca_regs[6] = { AR_PHY_CCA, AR_PHY_CH1_CCA, -@@ -1249,6 +1270,8 @@ int ar5008_hw_attach_phy_ops(struct ath_ +@@ -1252,6 +1273,8 @@ int ar5008_hw_attach_phy_ops(struct ath_ if (ret) return ret; diff --git a/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch b/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch index 6b4aedab00..c57ec39126 100644 --- a/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch +++ b/package/kernel/mac80211/patches/603-rt2x00-introduce-rt2x00eeprom.patch @@ -1,6 +1,6 @@ --- a/.local-symbols +++ b/.local-symbols -@@ -285,6 +285,7 @@ RT2X00_LIB_FIRMWARE= +@@ -289,6 +289,7 @@ RT2X00_LIB_FIRMWARE= RT2X00_LIB_CRYPTO= RT2X00_LIB_LEDS= RT2X00_LIB_DEBUGFS= diff --git a/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch b/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch index 81a16e25fd..d04c4abb14 100644 --- a/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch +++ b/package/kernel/mac80211/patches/920-ath10k_allow_fallback_to_board_bin_on_empty_otp_stream.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c -@@ -250,7 +250,10 @@ static int ath10k_download_and_run_otp(s +@@ -280,7 +280,10 @@ static int ath10k_download_and_run_otp(s ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot otp execute result %d\n", result); -- 2.30.2