From 9fa5b3afc90b1dc2a69f90897f39a4e593b42b11 Mon Sep 17 00:00:00 2001 From: Chukun Pan Date: Sun, 16 May 2021 20:10:05 +0800 Subject: [PATCH] ramips: add support for JCG Q20 JCG Q20 is an AX 1800M router. Hardware specs: SoC: MediaTek MT7621AT Flash: Winbond W29N01HV 128 MiB RAM: Winbond W632GU6NB-11 256 MiB WiFi: MT7915 2.4/5 GHz 2T2R Ethernet: 10/100/1000 Mbps x3 LED: Status (red / blue) Button: Reset, WPS Power: DC 12V,1A Flash instructions: Upload factory.bin in stock firmware's upgrade page, do not preserve settings. MAC addresses map: 0x00004 *:3e wlan2g/wlan5g 0x3fff4 *:3c lan/label 0x3fffa *:3c wan Signed-off-by: Chukun Pan (cherry picked from commit 57cb387cfeee2a07902a2f1383ca471ef47265f3) --- package/boot/uboot-envtools/files/ramips | 3 + target/linux/ramips/dts/mt7621_jcg_q20.dts | 175 ++++++++++++++++++ target/linux/ramips/image/mt7621.mk | 17 ++ .../mt7621/base-files/etc/board.d/02_network | 1 + .../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 4 + .../mt7621/base-files/lib/upgrade/platform.sh | 1 + 6 files changed, 201 insertions(+) create mode 100644 target/linux/ramips/dts/mt7621_jcg_q20.dts diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index c153b6a422..5800a548e3 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -44,6 +44,9 @@ ravpower,rp-wd03) [ -n "$idx" ] && \ ubootenv_add_uci_config "/dev/mtd$idx" "0x4000" "0x1000" "0x1000" ;; +jcg,q20) + ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" + ;; linksys,ea7300-v1|\ linksys,ea7300-v2|\ linksys,ea7500-v2|\ diff --git a/target/linux/ramips/dts/mt7621_jcg_q20.dts b/target/linux/ramips/dts/mt7621_jcg_q20.dts new file mode 100644 index 0000000000..f0e829393c --- /dev/null +++ b/target/linux/ramips/dts/mt7621_jcg_q20.dts @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "jcg,q20", "mediatek,mt7621-soc"; + model = "JCG Q20"; + + aliases { + led-boot = &led_status_red; + led-failsafe = &led_status_red; + led-running = &led_status_blue; + led-upgrade = &led_status_blue; + label-mac-device = &gmac0; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: status_red { + label = "red:status"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + + led_status_blue: status_blue { + label = "blue:status"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + ubi-concat { + compatible = "mtd-concat"; + devices = <&ubiconcat0 &ubiconcat1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x0 0x5900000>; + }; + }; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "Config"; + reg = <0x80000 0x80000>; + }; + + factory: partition@100000 { + label = "Factory"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "kernel"; + reg = <0x180000 0x400000>; + }; + + ubiconcat0: partition@580000 { + label = "ubiconcat0"; + reg = <0x580000 0x1c00000>; + }; + + partition@2180000 { + label = "firmware_backup"; + reg = <0x2180000 0x2000000>; + }; + + partition@4180000 { + label = "rootfs_data_back"; + reg = <0x4180000 0x80000>; + read-only; + }; + + partition@4200000 { + label = "nvram_config"; + reg = <0x4200000 0x80000>; + read-only; + }; + + ubiconcat1: partition@4280000 { + label = "ubiconcat1"; + reg = <0x4280000 0x3d00000>; + }; + + /* + * last 512 KiB are for the bad block table + */ + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + }; +}; + +&gmac0 { + mtd-mac-address = <&factory 0x3fff4>; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "wan"; + mtd-mac-address = <&factory 0x3fffa>; + }; + + port@1 { + status = "okay"; + label = "lan1"; + }; + + port@4 { + status = "okay"; + label = "lan2"; + }; + }; +}; + +&state_default { + gpio { + groups = "jtag", "wdt"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 0ec283d74f..6edf6c0cd6 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -720,6 +720,23 @@ define Device/jcg_jhr-ac876m endef TARGET_DEVICES += jcg_jhr-ac876m +define Device/jcg_q20 + $(Device/dsa-migration) + BLOCKSIZE := 128k + PAGESIZE := 2048 + UBINIZE_OPTS := -E 5 + KERNEL_SIZE := 4096k + IMAGE_SIZE := 91136k + IMAGES += factory.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | \ + check-size + DEVICE_VENDOR := JCG + DEVICE_MODEL := Q20 + DEVICE_PACKAGES := kmod-mt7915e uboot-envtools +endef +TARGET_DEVICES += jcg_q20 + define Device/jcg_y2 $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index f017e4782e..f5b075f1f4 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -15,6 +15,7 @@ ramips_setup_interfaces() ;; asiarf,ap7621-nv1|\ glinet,gl-mt1300|\ + jcg,q20|\ lenovo,newifi-d1|\ mikrotik,routerboard-m33g|\ xiaomi,mi-router-3g|\ diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index e7f778aaf8..427bde4e38 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -14,6 +14,10 @@ case "$board" in [ "$PHYNBR" = "1" ] && \ macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress ;; + jcg,q20) + [ "$PHYNBR" = "1" ] && \ + macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" > /sys${DEVPATH}/macaddress + ;; linksys,ea7300-v1|\ linksys,ea7300-v2|\ linksys,ea7500-v2) diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index d30bc3db2e..98e429fdbf 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -49,6 +49,7 @@ platform_do_upgrade() { dlink,dir-2640-a1|\ dlink,dir-2660-a1|\ hiwifi,hc5962|\ + jcg,q20|\ linksys,ea7300-v1|\ linksys,ea7300-v2|\ linksys,ea7500-v2|\ -- 2.30.2