From a2c9fc9ff062df95de65d4d3d05dff48c53554ea Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Wed, 8 Jul 2020 20:48:57 +0200 Subject: [PATCH] ath79: correctly define WiFi switch for TL-WR841ND v8 The TL-WR841ND v8 feature a WiFi switch instead of a button. This adds the corresponding input-type to prevent booting into failsafe regularly. This has been defined correctly in ar71xx, but was overlooked when migrating to ath79. In contrast, the TL-WR842ND v2, which has the key set up as switch in ar71xx, actually has a button. The TL-MR3420 v2 has a button as well and is set up correctly for both targets. (Information based on TP-Link user guide) Note: While looking into this, I found that support PR for TL-MR3420 v2 switched reset button to ACTIVE_HIGH. However, the other two device still use ACTIVE_LOW. This seems strange, but I cannot verify it lacking the affected devices. Fixes: FS#2733 Fixes: 9601d94138de ("add support for TP-Link TL-WR841N/ND v8") Signed-off-by: Adrian Schmutzler (backported from commit 5e86877f36b0d95127dcef8ed3abf78ecd78061d) --- target/linux/ath79/dts/ar9341_tplink_tl-wr841-v8.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/target/linux/ath79/dts/ar9341_tplink_tl-wr841-v8.dts b/target/linux/ath79/dts/ar9341_tplink_tl-wr841-v8.dts index ccc0c195ca..a66c86f731 100644 --- a/target/linux/ath79/dts/ar9341_tplink_tl-wr841-v8.dts +++ b/target/linux/ath79/dts/ar9341_tplink_tl-wr841-v8.dts @@ -32,6 +32,7 @@ rfkill { label = "WiFi"; linux,code = ; + linux,input-type = ; gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; debounce-interval = <60>; }; -- 2.30.2