From c2e122528467a2f2018a84c3e0333b7211717d9f Mon Sep 17 00:00:00 2001 From: =?utf8?q?Michael=20B=C3=BCsch?= Date: Sun, 15 Feb 2009 18:19:48 +0000 Subject: [PATCH] spi-gpio: Implement spidelay for busses that need it. SVN-Revision: 14525 --- .../920-04-spi-gpio-implement-spi-delay.patch | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 target/linux/generic-2.6/patches-2.6.28/920-04-spi-gpio-implement-spi-delay.patch diff --git a/target/linux/generic-2.6/patches-2.6.28/920-04-spi-gpio-implement-spi-delay.patch b/target/linux/generic-2.6/patches-2.6.28/920-04-spi-gpio-implement-spi-delay.patch new file mode 100644 index 0000000000..b224081935 --- /dev/null +++ b/target/linux/generic-2.6/patches-2.6.28/920-04-spi-gpio-implement-spi-delay.patch @@ -0,0 +1,60 @@ +Implement the SPI-GPIO delay function for busses that need speed limitation. + +--mb + + + +Index: linux-2.6.28.5/drivers/spi/spi_gpio.c +=================================================================== +--- linux-2.6.28.5.orig/drivers/spi/spi_gpio.c 2009-02-15 18:53:47.000000000 +0100 ++++ linux-2.6.28.5/drivers/spi/spi_gpio.c 2009-02-15 19:08:58.000000000 +0100 +@@ -21,6 +21,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -69,6 +70,7 @@ struct spi_gpio { + * #define SPI_MOSI_GPIO 120 + * #define SPI_SCK_GPIO 121 + * #define SPI_N_CHIPSEL 4 ++ * #undef NEED_SPIDELAY + * #include "spi_gpio.c" + */ + +@@ -76,6 +78,7 @@ struct spi_gpio { + #define DRIVER_NAME "spi_gpio" + + #define GENERIC_BITBANG /* vs tight inlines */ ++#define NEED_SPIDELAY 1 + + /* all functions referencing these symbols must define pdata */ + #define SPI_MISO_GPIO ((pdata)->miso) +@@ -120,12 +123,20 @@ static inline int getmiso(const struct s + #undef pdata + + /* +- * NOTE: this clocks "as fast as we can". It "should" be a function of the +- * requested device clock. Software overhead means we usually have trouble +- * reaching even one Mbit/sec (except when we can inline bitops), so for now +- * we'll just assume we never need additional per-bit slowdowns. ++ * NOTE: to clock "as fast as we can", set spi_device.max_speed_hz ++ * and spi_transfer.speed_hz to 0. ++ * Otherwise this is a function of the requested device clock. ++ * Software overhead means we usually have trouble ++ * reaching even one Mbit/sec (except when we can inline bitops). So on small ++ * embedded devices with fast SPI slaves you usually don't need a delay. + */ +-#define spidelay(nsecs) do {} while (0) ++static inline void spidelay(unsigned nsecs) ++{ ++#ifdef NEED_SPIDELAY ++ if (unlikely(nsecs)) ++ ndelay(nsecs); ++#endif /* NEED_SPIDELAY */ ++} + + #define EXPAND_BITBANG_TXRX + #include -- 2.30.2