From c32ad22e40062f7786777d58c96d505057b8a41c Mon Sep 17 00:00:00 2001 From: John Crispin Date: Thu, 6 Nov 2014 12:19:53 +0000 Subject: [PATCH] ralink: improve r43200 r43200 tries to detect if the fixup is needed or not. control the behaviour via OF instead and disable unused ports. Signed-off-by: John Crispin SVN-Revision: 43201 --- target/linux/ramips/dts/E1700.dts | 1 + target/linux/ramips/dts/MT7620a_MT7530.dts | 1 + .../files/drivers/net/ethernet/ralink/gsw_mt7620a.c | 13 ++++++++----- 3 files changed, 10 insertions(+), 5 deletions(-) diff --git a/target/linux/ramips/dts/E1700.dts b/target/linux/ramips/dts/E1700.dts index c95b501074..c9d03cdc23 100644 --- a/target/linux/ramips/dts/E1700.dts +++ b/target/linux/ramips/dts/E1700.dts @@ -109,6 +109,7 @@ gsw@10110000 { ralink,port4 = "gmac"; + mediatek,mt7530 = <1>; }; wmac@10180000 { diff --git a/target/linux/ramips/dts/MT7620a_MT7530.dts b/target/linux/ramips/dts/MT7620a_MT7530.dts index 2888efd5f1..4f311441dc 100644 --- a/target/linux/ramips/dts/MT7620a_MT7530.dts +++ b/target/linux/ramips/dts/MT7620a_MT7530.dts @@ -99,6 +99,7 @@ gsw@10110000 { ralink,port4 = "gmac"; + mediatek,mt7530 = <1>; }; pcie@10140000 { diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620a.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620a.c index 0f9fc35fe3..e31dd29b42 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620a.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/gsw_mt7620a.c @@ -73,7 +73,6 @@ #define GSW_REG_IMR 0x7008 #define GSW_REG_ISR 0x700c #define GSW_REG_GPC1 0x7014 -#define GSW_PHY1_DISABLE BIT(25) #define SYSC_REG_CFG1 0x14 @@ -409,15 +408,19 @@ void mt7620_port_init(struct fe_priv *priv, struct device_node *np) } } -static void gsw_hw_init(struct mt7620_gsw *gsw) +static void gsw_hw_init(struct mt7620_gsw *gsw, struct device_node *np) { u32 is_BGA = mt7620_is_bga(); rt_sysc_w32(rt_sysc_r32(SYSC_REG_CFG1) | BIT(8), SYSC_REG_CFG1); gsw_w32(gsw, gsw_r32(gsw, GSW_REG_CKGCR) & ~(0x3 << 4), GSW_REG_CKGCR); - /* EPHY1 fixup - only run if the ephy is enabled */ - if (gsw_r32(gsw, GSW_REG_GPC1) & GSW_PHY1_DISABLE == GSW_PHY1_DISABLE) { + if (of_property_read_bool(np, "mediatek,mt7530")) { + gsw_w32(gsw, gsw_r32(gsw, GSW_REG_GPC1) | (0x1f << 24), GSW_REG_GPC1); + pr_info("gsw: truning EPHY off\n"); + } else { + /* EPHY1 fixup - only run if the ephy is enabled */ + /*correct PHY setting L3.0 BGA*/ _mt7620_mii_write(gsw, 1, 31, 0x4000); //global, page 4 @@ -565,7 +568,7 @@ int mt7620_gsw_probe(struct fe_priv *priv) else WARN_ON(port4); - gsw_hw_init(gsw); + gsw_hw_init(gsw, np); gsw_w32(gsw, ~PORT_IRQ_ST_CHG, GSW_REG_IMR); request_irq(gsw->irq, gsw_interrupt, 0, "gsw", priv); -- 2.30.2