2015-02-24 Felix Fietkaumtools: fix build errors on mac os x (#19064)
2015-02-23 Rafał Miłeckigeneric: early (incomplete!) 4.0 support
2015-02-23 Imre Kalozleds: package the NXP PCA963x driver
2015-02-23 Imre Kalozmvebu: set default WRT1900AC switch config
2015-02-23 Imre Kalozmvebu: set WRT1900AC WAN interface MAC address
2015-02-22 John Crispinppp: Allow PPTP over a specified interface
2015-02-22 John Crispincomgt: Use TCGETS and TCSETS ioctls for struct termios
2015-02-22 John Crispinipq806x: delete config-3.14 file
2015-02-22 John Crispinipq806x: fix "reboot" command
2015-02-22 John Crispinipq806x: enable watchdog kernel option
2015-02-22 John Crispinkernel: Fix USB gadget modules for v3.18
2015-02-22 John Crispinmpc85xx: add mpic timer clock frequency to avoid boot...
2015-02-22 John Crispinramips: rt288x: add missing symbol
2015-02-22 John Crispinramips: nexx wt3020: fix status led
2015-02-22 Nicolas Thillpackages: remove uneeded PKG_BUILD_DIR overrides
2015-02-20 Rafał Miłeckibcm53xx: add one more NVRAM possible size (0x180000)
2015-02-19 John Crispinmpc85xx: set v3.18 as default
2015-02-19 John Crispinralink: bump to v3.18
2015-02-19 John Crispinramips: fix the mt7628 dts file
2015-02-19 Felix Fietkautools/patchelf: fix portability issue breaking mac...
2015-02-19 John Crispinat91: Add dts for Exegin Q5x boards.
2015-02-19 John Crispinat91: USB gadget subsystem cleanup and driver fix.
2015-02-19 John Crispinat91: Enable power and reset controller drivers.
2015-02-18 John Crispinat91: bump to v3.18
2015-02-18 Jo-Philipp... include: netfilter: fix packaging of LOG target for...
2015-02-18 John Crispinau1000: fix 3.18 and set it as default
2015-02-17 Jo-Philipp... ar71xx: fix 82_patch_ath10k
2015-02-17 John Crispinmpc85xx: add v3.18 support
2015-02-17 John Crispinhostapd: fix c&p typo
2015-02-17 John Crispinar71xx: make v3.18 default
2015-02-17 John Crispinkernel: re-enable the firmware loader
2015-02-17 Steven Barthnetifd: various device config / event fixes (thx Hans...
2015-02-17 Steven Barthiproute2: bump version from v3.18.0 to v3.19.0
2015-02-16 John Crispinramips: Buffalo WZR-AGL300NH target support
2015-02-16 John Crispinramips: enables rt288x PCIe
2015-02-16 John Crispinoxnas: fix itb generation
2015-02-16 Rafał Miłeckibcm53xx: include kmod-brcmfmac in default profile
2015-02-16 Rafał Miłeckimac80211: brcmfmac: Add PCIe support option
2015-02-16 Rafał Miłeckimac80211: brcmfmac: Add SDIO support option
2015-02-16 Rafał Miłeckibcm53xx: sprom: extract for PCI host
2015-02-16 Rafał Miłeckibcm53xx: sprom: prepare to support other hosttype-s
2015-02-16 Imre Kalozmvebu: refresh 3.18 patches
2015-02-16 Felix Fietkaunetifd: update to the latest version, reverts a commit...
2015-02-16 John Crispinlinux: fix kmod-usb-net-* for >= 3.17
2015-02-15 John Crispinar71xx: fix mv88e6063 compile for 3.14
2015-02-15 John Crispinar71xx: fix a compile bug in 902-unaligned_access_hacks...
2015-02-15 John Crispinprocd: fix PKG_CONFIG_DEPENDS
2015-02-15 John Crispinar71xx: add v3.18 support
2015-02-14 Imre Kalozmvebu: fix WRT1900AC ubinized images
2015-02-14 John Crispinralink: fix the config files
2015-02-14 John Crispinar71xx: ZyXEL NBG6716 rfkill switch fix
2015-02-14 John Crispinscripts: fix getver git dir check
2015-02-14 John Crispinlantiq: disable buffered writes on Intel command set...
2015-02-14 John Crispinlantiq: Fix flash for targets with NO_XIP
2015-02-14 John Crispinbrcm2708: add kmod-hwmon-bcm2835 support and more missi...
2015-02-14 John Crispinbrcm2708: force uart as the default console for procd...
2015-02-14 John Crispinbrcm2708: add board detection and LED support
2015-02-14 John Crispinuci-defaults: add ucidef_set_led_mmc
2015-02-14 Nicolas Thillpackage/valgrind: fix build on eglibc
2015-02-14 Nicolas Thillgeneric: ocf: irq compat stuff is not needed anymore
2015-02-14 Imre Kalozfix typo
2015-02-14 Imre Kalozgeneric: upgrade to 3.18.7
2015-02-13 John Crispinixp4xx: fix gpio_line_set() logic, fixes #18986
2015-02-13 John Crispinhostapd: backport BSSID black/whitelists
2015-02-13 John Crispinkexec-tools: bump version from v2.0.4 to v2.0.9.
2015-02-13 John Crispinkexec-tools: show up only when KERNEL_KEXEC is enabled.
2015-02-13 John Crispinbrcm2708-gpu-fw: simplify target dependencies
2015-02-13 John Crispinbrcm2708: fix spidev
2015-02-13 John Crispinbrcm2708: refresh patches
2015-02-13 John Crispinbrcm2708: add missing config symbols and fix kernel...
2015-02-13 John Crispinbrcm2708: add subtarget copyright and use better board...
2015-02-13 John Crispinar7: switch to v3.18
2015-02-13 John Crispingeneric: improve kexec support of MIPS.
2015-02-13 John Crispinlantiq: fix DGN3500 root device
2015-02-13 John Crispinar71xx: Add profile and build image for TP-Link MR12U v1
2015-02-13 John Crispinar71xx: Add user-space support for TP-Link MR12U v1
2015-02-13 John Crispinar71xx: ZyXEL NBG6716 add gpio usb power on/off
2015-02-12 Rafał Miłeckikernel: mtdsplit_uimage: fix passed info about buf...
2015-02-12 Nicolas Thillsunxi: A20-OLinuXino-Lime profile rename leftover
2015-02-12 Luka Perkovkirkwood: Seagate GoFlex Net
2015-02-12 John Crispinlantiq: make m25p80 work again
2015-02-12 John Crispinlantiq: fix mac addr assignment inside lantiq_etop
2015-02-12 John Crispinlantiq: PCI should be enabled on vrx200
2015-02-12 John Crispinralink: make the mt7621 irq core with with the new...
2015-02-12 John Crispinar71xx: ZyXEL NBG6716 led/buttons cleanup
2015-02-12 John Crispingeneric: fix broken patch in the transition of 3.19...
2015-02-12 Rafał Miłeckikernel: mtdsplit_uimage: read more data to match Edimax...
2015-02-12 Rafał Miłeckikernel: mtdsplit_uimage: use separated buffer for readi...
2015-02-12 Rafał Miłeckikernel: mtdsplit_uimage: add parser for Edimax devices
2015-02-12 Rafał Miłeckimtdsplit_uimage: more generic header verify function
2015-02-11 Rafał Miłeckikernel: fix bgmac check for chip ID
2015-02-11 Rafał Miłeckikernel: backport mainlined bgmac patches from 3.19
2015-02-11 Jo-Philipp... base-files: fix target/subtarget value in /etc/openwrt_...
2015-02-11 Rafał Miłeckibcm53xx: use bcm47xx_wdt for restarting device
2015-02-11 John Crispinoxnas: disable usbgadget support
2015-02-11 John Crispinbrcm2708-gpu-fw: revert to github releases, adapt to...
2015-02-11 John Crispinbrcm2708: add missing SUBTARGETS:= to makefile
2015-02-11 John Crispinbrcm2708: remove CMA_DEBUG
2015-02-11 John Crispinbrcm2708: add Raspberry Pi 2 support
2015-02-11 John Crispinbrcm2708: remove 3.14 support