uqmi: ensure CID is a numeric value before proceeding
[openwrt/staging/chunkeey.git] / package / network / utils / uqmi / files / lib / netifd / proto / qmi.sh
1 #!/bin/sh
2
3 [ -n "$INCLUDE_ONLY" ] || {
4 . /lib/functions.sh
5 . ../netifd-proto.sh
6 init_proto "$@"
7 }
8
9 proto_qmi_init_config() {
10 available=1
11 no_device=1
12 proto_config_add_string "device:device"
13 proto_config_add_string apn
14 proto_config_add_string auth
15 proto_config_add_string username
16 proto_config_add_string password
17 proto_config_add_string pincode
18 proto_config_add_int delay
19 proto_config_add_string modes
20 proto_config_add_string pdptype
21 proto_config_add_int profile
22 proto_config_add_boolean dhcpv6
23 proto_config_add_boolean autoconnect
24 proto_config_add_int plmn
25 proto_config_add_defaults
26 }
27
28 proto_qmi_setup() {
29 local interface="$1"
30 local dataformat connstat
31 local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn $PROTO_DEFAULT_OPTIONS
32 local cid_4 pdh_4 cid_6 pdh_6
33 local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
34 json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn $PROTO_DEFAULT_OPTIONS
35
36 [ "$metric" = "" ] && metric="0"
37
38 [ -n "$ctl_device" ] && device=$ctl_device
39
40 [ -n "$device" ] || {
41 echo "No control device specified"
42 proto_notify_error "$interface" NO_DEVICE
43 proto_set_available "$interface" 0
44 return 1
45 }
46
47 device="$(readlink -f $device)"
48 [ -c "$device" ] || {
49 echo "The specified control device does not exist"
50 proto_notify_error "$interface" NO_DEVICE
51 proto_set_available "$interface" 0
52 return 1
53 }
54
55 devname="$(basename "$device")"
56 devpath="$(readlink -f /sys/class/usbmisc/$devname/device/)"
57 ifname="$( ls "$devpath"/net )"
58 [ -n "$ifname" ] || {
59 echo "The interface could not be found."
60 proto_notify_error "$interface" NO_IFACE
61 proto_set_available "$interface" 0
62 return 1
63 }
64
65 [ -n "$delay" ] && sleep "$delay"
66
67 while uqmi -s -d "$device" --get-pin-status | grep '"UIM uninitialized"' > /dev/null; do
68 [ -e "$device" ] || return 1
69 sleep 1;
70 done
71
72 [ -n "$pincode" ] && {
73 uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null || {
74 echo "Unable to verify PIN"
75 proto_notify_error "$interface" PIN_FAILED
76 proto_block_restart "$interface"
77 return 1
78 }
79 }
80
81 [ -n "$plmn" ] && {
82 local mcc mnc
83 if [ "$plmn" = 0 ]; then
84 mcc=0
85 mnc=0
86 echo "Setting PLMN to auto"
87 else
88 mcc=${plmn:0:3}
89 mnc=${plmn:3}
90 echo "Setting PLMN to $plmn"
91 fi
92 uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" || {
93 echo "Unable to set PLMN"
94 proto_notify_error "$interface" PLMN_FAILED
95 proto_block_restart "$interface"
96 return 1
97 }
98 }
99
100 # Cleanup current state if any
101 uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect
102
103 # Set IP format
104 uqmi -s -d "$device" --set-data-format 802.3
105 uqmi -s -d "$device" --wda-set-data-format 802.3
106 dataformat="$(uqmi -s -d "$device" --wda-get-data-format)"
107
108 if [ "$dataformat" = '"raw-ip"' ]; then
109
110 [ -f /sys/class/net/$ifname/qmi/raw_ip ] || {
111 echo "Device only supports raw-ip mode but is missing this required driver attribute: /sys/class/net/$ifname/qmi/raw_ip"
112 return 1
113 }
114
115 echo "Device does not support 802.3 mode. Informing driver of raw-ip only for $ifname .."
116 echo "Y" > /sys/class/net/$ifname/qmi/raw_ip
117 fi
118
119 uqmi -s -d "$device" --sync
120
121 echo "Waiting for network registration"
122 while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > /dev/null; do
123 [ -e "$device" ] || return 1
124 sleep 5;
125 done
126
127 [ -n "$modes" ] && uqmi -s -d "$device" --set-network-modes "$modes"
128
129 echo "Starting network $interface"
130
131 pdptype=$(echo "$pdptype" | awk '{print tolower($0)}')
132 [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype="ip"
133
134 if [ "$pdptype" = "ip" ]; then
135 [ -z "$autoconnect" ] && autoconnect=1
136 [ "$autoconnect" = 0 ] && autoconnect=""
137 else
138 [ "$autoconnect" = 1 ] || autoconnect=""
139 fi
140
141 [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
142 cid_4=$(uqmi -s -d "$device" --get-client-id wds)
143 if ! [ "$cid_4" -eq "$cid_4" ] 2> /dev/null; then
144 echo "Unable to obtain client ID"
145 proto_notify_error "$interface" NO_CID
146 return 1
147 fi
148
149 uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null
150
151 pdh_4=$(uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
152 --start-network \
153 ${apn:+--apn $apn} \
154 ${profile:+--profile $profile} \
155 ${auth:+--auth-type $auth} \
156 ${username:+--username $username} \
157 ${password:+--password $password} \
158 ${autoconnect:+--autoconnect})
159
160 # pdh_4 is a numeric value on success
161 if ! [ "$pdh_4" -eq "$pdh_4" ] 2> /dev/null; then
162 echo "Unable to connect IPv4"
163 uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
164 proto_notify_error "$interface" CALL_FAILED
165 return 1
166 fi
167
168 # Check data connection state
169 connstat=$(uqmi -s -d "$device" --get-data-status)
170 [ "$connstat" == '"connected"' ] || {
171 echo "No data link!"
172 uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
173 proto_notify_error "$interface" CALL_FAILED
174 return 1
175 }
176 }
177
178 [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
179 cid_6=$(uqmi -s -d "$device" --get-client-id wds)
180 if ! [ "$cid_6" -eq "$cid_6" ] 2> /dev/null; then
181 echo "Unable to obtain client ID"
182 proto_notify_error "$interface" NO_CID
183 return 1
184 fi
185
186 uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null
187
188 pdh_6=$(uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
189 --start-network \
190 ${apn:+--apn $apn} \
191 ${profile:+--profile $profile} \
192 ${auth:+--auth-type $auth} \
193 ${username:+--username $username} \
194 ${password:+--password $password} \
195 ${autoconnect:+--autoconnect})
196
197 # pdh_6 is a numeric value on success
198 if ! [ "$pdh_6" -eq "$pdh_6" ] 2> /dev/null; then
199 echo "Unable to connect IPv6"
200 uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds
201 proto_notify_error "$interface" CALL_FAILED
202 return 1
203 fi
204
205 # Check data connection state
206 connstat=$(uqmi -s -d "$device" --get-data-status)
207 [ "$connstat" == '"connected"' ] || {
208 echo "No data link!"
209 uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds
210 proto_notify_error "$interface" CALL_FAILED
211 return 1
212 }
213 }
214
215 echo "Setting up $ifname"
216 proto_init_update "$ifname" 1
217 proto_set_keep 1
218 proto_add_data
219 [ -n "$pdh_4" ] && {
220 json_add_string "cid_4" "$cid_4"
221 json_add_string "pdh_4" "$pdh_4"
222 }
223 [ -n "$pdh_6" ] && {
224 json_add_string "cid_6" "$cid_6"
225 json_add_string "pdh_6" "$pdh_6"
226 }
227 proto_close_data
228 proto_send_update "$interface"
229 [ -n "$pdh_6" ] && {
230 if [ -z "$dhcpv6" -o "$dhcpv6" = 0 ]; then
231 json_load "$(uqmi -s -d $device --set-client-id wds,$cid_6 --get-current-settings)"
232 json_select ipv6
233 json_get_var ip_6 ip
234 json_get_var gateway_6 gateway
235 json_get_var dns1_6 dns1
236 json_get_var dns2_6 dns2
237 json_get_var ip_prefix_length ip-prefix-length
238
239 proto_init_update "$ifname" 1
240 proto_set_keep 1
241 proto_add_ipv6_address "$ip_6" "128"
242 proto_add_ipv6_prefix "${ip_6}/${ip_prefix_length}"
243 proto_add_ipv6_route "$gateway_6" "128"
244 [ "$defaultroute" = 0 ] || proto_add_ipv6_route "::0" 0 "$gateway_6" "" "" "${ip_6}/${ip_prefix_length}"
245 [ "$peerdns" = 0 ] || {
246 proto_add_dns_server "$dns1_6"
247 proto_add_dns_server "$dns2_6"
248 }
249 proto_send_update "$interface"
250 else
251 json_init
252 json_add_string name "${interface}_6"
253 json_add_string ifname "@$interface"
254 json_add_string proto "dhcpv6"
255 proto_add_dynamic_defaults
256 # RFC 7278: Extend an IPv6 /64 Prefix to LAN
257 json_add_string extendprefix 1
258 json_close_object
259 ubus call network add_dynamic "$(json_dump)"
260 fi
261 }
262
263 [ -n "$pdh_4" ] && {
264 json_init
265 json_add_string name "${interface}_4"
266 json_add_string ifname "@$interface"
267 json_add_string proto "dhcp"
268 proto_add_dynamic_defaults
269 json_close_object
270 ubus call network add_dynamic "$(json_dump)"
271 }
272 }
273
274 qmi_wds_stop() {
275 local cid="$1"
276 local pdh="$2"
277
278 [ -n "$cid" ] || return
279
280 uqmi -s -d "$device" --set-client-id wds,"$cid" \
281 --stop-network 0xffffffff \
282 --autoconnect > /dev/null
283
284 [ -n "$pdh" ] && uqmi -s -d "$device" --set-client-id wds,"$cid" --stop-network "$pdh"
285 uqmi -s -d "$device" --set-client-id wds,"$cid" --release-client-id wds
286 }
287
288 proto_qmi_teardown() {
289 local interface="$1"
290
291 local device cid_4 pdh_4 cid_6 pdh_6
292 json_get_vars device
293
294 [ -n "$ctl_device" ] && device=$ctl_device
295
296 echo "Stopping network $interface"
297
298 json_load "$(ubus call network.interface.$interface status)"
299 json_select data
300 json_get_vars cid_4 pdh_4 cid_6 pdh_6
301
302 qmi_wds_stop "$cid_4" "$pdh_4"
303 qmi_wds_stop "$cid_6" "$pdh_6"
304
305 proto_init_update "*" 0
306 proto_send_update "$interface"
307 }
308
309 [ -n "$INCLUDE_ONLY" ] || {
310 add_protocol qmi
311 }