target/linux/ath79/base-files/etc/board.d/02_network

   1 #!/bin/sh
   2
   3 . /lib/functions/system.sh
   4 . /lib/functions/uci-defaults.sh
   5 . /lib/functions/k2t.sh
   6
   7 ath79_setup_interfaces()
   8 {
   9         local board="$1"
  10
  11         case "$board" in
  12         avm,fritz300e|\
  13         devolo,dvl1200i|\
  14         devolo,dvl1750c|\
  15         devolo,dvl1750i|\
  16         glinet,ar300m-lite|\
  17         ocedo,koala|\
  18         ocedo,raccoon|\
  19         pcs,cap324|\
  20         pisen,wmm003n|\
  21         pqi,air-pen|\
  22         tplink,cpe210-v2|\
  23         tplink,cpe210-v3|\
  24         tplink,re350k-v1|\
  25         tplink,re450-v2|\
  26         tplink,tl-mr10u|\
  27         tplink,tl-mr3020-v1|\
  28         tplink,tl-mr3040-v2|\
  29         tplink,tl-wa901nd-v2|\
  30         tplink,tl-wr703n|\
  31         ubnt,bullet-m|\
  32         ubnt,bullet-m-xw|\
  33         ubnt,lap-120|\
  34         ubnt,nanobeam-ac|\
  35         ubnt,nanostation-ac-loco|\
  36         ubnt,rocket-m|\
  37         ubnt,unifiac-lite|\
  38         ubnt,unifiac-mesh|\
  39         ubnt,unifi|\
  40         wd,mynet-wifi-rangeextender|\
  41         winchannel,wb2000)
  42                 ucidef_set_interface_lan "eth0"
  43                 ;;
  44         avm,fritz4020|\
  45         pcs,cr3000|\
  46         tplink,archer-c58-v1|\
  47         tplink,archer-c59-v1)
  48                 ucidef_set_interface_wan "eth0"
  49                 ucidef_add_switch "switch0" \
  50                         "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
  51                 ;;
  52         buffalo,bhr-4grv|\
  53         buffalo,wzr-hp-g450h)
  54                 ucidef_add_switch "switch0" \
  55                         "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
  56                 ;;
  57         buffalo,bhr-4grv2)
  58                 ucidef_add_switch "switch0" \
  59                         "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
  60                 ;;
  61         buffalo,wzr-hp-ag300h)
  62                 ucidef_set_interface_wan "eth1"
  63                 ucidef_add_switch "switch0" \
  64                         "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
  65                 ;;
  66         buffalo,wzr-hp-g302h-a1a0)
  67                 ucidef_add_switch "switch0" \
  68                         "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
  69                 ;;
  70         comfast,cf-e5|\
  71         glinet,gl-ar150|\
  72         glinet,gl-ar300m-nand|\
  73         glinet,gl-ar300m-nor|\
  74         glinet,gl-x750|\
  75         tplink,tl-wr810n-v1|\
  76         tplink,tl-wr810n-v2|\
  77         ubnt,routerstation|\
  78         yuncore,a770)
  79                 ucidef_set_interfaces_lan_wan "eth1" "eth0"
  80                 ;;
  81         devolo,dvl1200e|\
  82         devolo,dvl1750e)
  83                 ucidef_set_interface_lan "eth0 eth1"
  84                 ;;
  85         dlink,dir-825-b1)
  86                 ucidef_set_interface_wan "eth1"
  87                 ucidef_add_switch "switch0" \
  88                         "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
  89                 ;;
  90         dlink,dir-825-c1|\
  91         dlink,dir-835-a1|\
  92         dlink,dir-859-a1|\
  93         engenius,epg5000|\
  94         tplink,archer-c2-v3|\
  95         tplink,tl-wr1043nd-v4)
  96                 ucidef_add_switch "switch0" \
  97                         "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
  98                 ;;
  99         elecom,wrc-1750ghbk2-i|\
 100         elecom,wrc-300ghbk2-i)
 101                 ucidef_add_switch "switch0" \
 102                         "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
 103                 ;;
 104         embeddedwireless,dorin)
 105                 ucidef_add_switch "switch0" \
 106                         "0@eth0" "1:wan" "2:lan:3" "3:lan:2"
 107                 ;;
 108         engenius,ews511ap)
 109                 ucidef_set_interface_lan "eth0 eth1" "dhcp"
 110                 ;;
 111         etactica,eg200)
 112                 ucidef_set_interface_lan "eth0" "dhcp"
 113                 ;;
 114         glinet,gl-ar750s)
 115                 ucidef_add_switch "switch0" \
 116                         "0@eth0" "2:lan:2" "3:lan:1" "1:wan"
 117                 ;;
 118         iodata,etg3-r|\
 119         iodata,wn-ac1167dgr|\
 120         iodata,wn-ac1600dgr|\
 121         iodata,wn-ac1600dgr2|\
 122         iodata,wn-ag300dgr|\
 123         pcs,cr5000)
 124                 ucidef_add_switch "switch0" \
 125                         "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
 126         ;;
 127         librerouter,librerouter-v1)
 128                 ucidef_add_switch "switch0" \
 129                         "0@eth0" "5:wan" "6@eth1" "4:lan"
 130         ;;
 131         nec,wg800hp)
 132                 ucidef_add_switch "switch0" \
 133                         "0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
 134                 ;;
 135         netgear,wndr3700|\
 136         netgear,wndr3700v2|\
 137         netgear,wndr3800)
 138                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
 139                 ucidef_add_switch "switch0" \
 140                         "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
 141                 ucidef_add_switch_attr "switch0" "blinkrate" 2
 142                 ucidef_add_switch_port_attr "switch0" 1 led 6
 143                 ucidef_add_switch_port_attr "switch0" 2 led 9
 144                 ucidef_add_switch_port_attr "switch0" 5 led 2
 145                 ;;
 146         netgear,wnr612-v2|\
 147         on,n150r|\
 148         tplink,tl-wr841-v7)
 149                 ucidef_set_interface_wan "eth0"
 150                 ucidef_add_switch "switch0" \
 151                 "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 152                 ;;
 153         phicomm,k2t)
 154                 ucidef_add_switch "switch0" \
 155                         "0@eth0" "3:lan:1" "5:lan:2" "4:wan"
 156                 ;;
 157         rosinson,wr818)
 158                 ucidef_add_switch "switch0" \
 159                         "0@eth0" "1:lan" "2:lan" "3:wan"
 160                 ;;
 161         tplink,archer-c5-v1|\
 162         tplink,archer-c7-v1|\
 163         tplink,archer-c7-v2|\
 164         tplink,tl-wdr4900-v2)
 165                 ucidef_add_switch "switch0" \
 166                         "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
 167                 ;;
 168         buffalo,whr-g301n|\
 169         tplink,tl-mr3220-v1|\
 170         tplink,tl-mr3420-v1|\
 171         tplink,tl-wr841-v9|\
 172         tplink,tl-wr841-v11|\
 173         ubnt,airrouter)
 174                 ucidef_set_interface_wan "eth0"
 175                 ucidef_add_switch "switch0" \
 176                         "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
 177                 ;;
 178         tplink,archer-a7-v5|\
 179         tplink,archer-c6-v2|\
 180         tplink,archer-c7-v4|\
 181         tplink,archer-c7-v5|\
 182         tplink,tl-wdr3600|\
 183         tplink,tl-wdr4300|\
 184         tplink,tl-wr941n-v7-cn)
 185                 ucidef_add_switch "switch0" \
 186                         "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
 187                 ;;
 188         tplink,tl-wr1043nd-v1)
 189                 ucidef_add_switch "switch0" \
 190                         "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
 191                 ;;
 192         tplink,tl-wr1043nd-v2|\
 193         tplink,tl-wr1043nd-v3)
 194                 ucidef_add_switch "switch0" \
 195                         "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
 196                 ;;
 197         tplink,tl-wr2543-v1)
 198                 ucidef_add_switch "switch0" \
 199                         "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
 200                 ;;
 201         tplink,tl-wr740n-v1|\
 202         tplink,tl-wr740n-v3|\
 203         tplink,tl-wr741-v1|\
 204         tplink,tl-wr743nd-v1|\
 205         tplink,tl-wr841-v5|\
 206         tplink,tl-wr941-v4)
 207                 ucidef_set_interface_wan "eth0"
 208                 ucidef_add_switch "switch0" \
 209                         "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
 210                 ;;
 211         tplink,tl-wr710n-v1)
 212                 ucidef_set_interface_wan "eth0"
 213                 ucidef_add_switch "switch0" \
 214                         "0@eth1" "3:lan"
 215                 ;;
 216         tplink,tl-wr740n-v4|\
 217         tplink,tl-wr741nd-v4|\
 218         tplink,tl-wr841-v8|\
 219         tplink,tl-wr842n-v1|\
 220         tplink,tl-wr842n-v2)
 221                 ucidef_set_interface_wan "eth0"
 222                 ucidef_add_switch "switch0" \
 223                         "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
 224                 ;;
 225         tplink,tl-wr941-v2)
 226                 ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
 227                 ;;
 228         ubnt,routerstation-pro)
 229                 ucidef_set_interface_wan "eth0"
 230                 ucidef_add_switch "switch0" \
 231                         "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
 232                 ;;
 233         ubnt,nanostation-m-xw)
 234                 ucidef_add_switch "switch0" \
 235                         "0@eth0" "5:lan" "1:wan"
 236                 ;;
 237         ubnt,nanostation-ac|\
 238         ubnt,unifiac-mesh-pro|\
 239         ubnt,unifiac-pro)
 240                 ucidef_add_switch "switch0" \
 241                         "0@eth0" "2:lan" "3:wan"
 242                 ;;
 243         xiaomi,mi-router-4q)
 244                 ucidef_set_interface_wan "eth0"
 245                 ucidef_add_switch "switch0" \
 246                         "0@eth1" "3:lan:1" "4:lan:2"
 247                 ;;
 248         *)
 249                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
 250                 ;;
 251         esac
 252 }
 253
 254 ath79_setup_macs()
 255 {
 256         local board="$1"
 257
 258         case "$board" in
 259         avm,fritz300e)
 260                 lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
 261                 ;;
 262         avm,fritz4020)
 263                 lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
 264                 wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
 265                 ;;
 266         dlink,dir-825-b1)
 267                 lan_mac=$(mtd_get_mac_text "caldata" 65440)
 268                 wan_mac=$(mtd_get_mac_text "caldata" 65460)
 269                 ;;
 270         dlink,dir-825-c1|\
 271         dlink,dir-835-a1)
 272                 lan_mac=$(mtd_get_mac_text "mac" 4)
 273                 wan_mac=$(mtd_get_mac_text "mac" 24)
 274                 ;;
 275         dlink,dir-859-a1)
 276                 lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
 277                 wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
 278                 ;;
 279         elecom,wrc-1750ghbk2-i|\
 280         elecom,wrc-300ghbk2-i)
 281                 wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2)
 282                 ;;
 283         engenius,epg5000|\
 284         iodata,wn-ac1167dgr|\
 285         iodata,wn-ac1600dgr|\
 286         iodata,wn-ac1600dgr2|\
 287         iodata,wn-ag300dgr)
 288                 lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
 289                 wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
 290                 ;;
 291         engenius,ews511ap)
 292                 lan_mac=$(mtd_get_mac_text "u-boot-env" 233)
 293                 eth1_mac=$(macaddr_add "$lan_mac" 1)
 294                 ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac"
 295                 ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac"
 296                 ;;
 297         iodata,etg3-r)
 298                 lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
 299                 wan_mac=$(macaddr_add "$lan_mac" -1)
 300                 ;;
 301         jjplus,ja76pf2)
 302                 wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n alias/ethaddr)
 303                 lan_mac=$(macaddr_add "$wan_mac" 1)
 304                 ;;
 305         nec,wg800hp)
 306                 lan_mac=$(mtd_get_mac_text board_data 640)
 307                 wan_mac=$(mtd_get_mac_text board_data 1152)
 308                 ;;
 309         netgear,wndr3700|\
 310         netgear,wndr3700v2|\
 311         netgear,wndr3800)
 312                 lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0)")
 313                 ;;
 314         phicomm,k2t)
 315                 lan_mac=$(k2t_get_mac "lan_mac")
 316                 wan_mac=$(k2t_get_mac "wan_mac")
 317                 ;;
 318         rosinson,wr818)
 319                 wan_mac=$(mtd_get_mac_binary factory 0)
 320                 lan_mac=$(macaddr_setbit_la "$wan_mac")
 321                 ;;
 322         tplink,archer-c7-v4)
 323                 base_mac=$(mtd_get_mac_binary config 8)
 324                 wan_mac=$(macaddr_add "$base_mac" 1)
 325                 ;;
 326         tplink,tl-wr1043nd-v4)
 327                 base_mac=$(mtd_get_mac_binary product-info 8)
 328                 wan_mac=$(macaddr_add "$base_mac" 1)
 329                 ;;
 330         tplink,tl-wr941-v2|\
 331         tplink,tl-wr941n-v7-cn)
 332                 base_mac=$(mtd_get_mac_binary u-boot 130048)
 333                 wan_mac=$(macaddr_add "$base_mac" 1)
 334                 ;;
 335         ubnt,routerstation|\
 336         ubnt,routerstation-pro)
 337                 wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n ar7100_esa)
 338                 lan_mac=$(macaddr_add "$wan_mac" 1)
 339                 ;;
 340         wd,mynet-wifi-rangeextender)
 341                 lan_mac=$(nvram get et0macaddr)
 342                 ;;
 343         esac
 344
 345         [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
 346         [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
 347 }
 348
 349 board_config_update
 350 board=$(board_name)
 351 ath79_setup_interfaces $board
 352 ath79_setup_macs $board
 353 board_config_flush
 354
 355 exit 0