target/linux/generic/patches-4.9/110-ehci_hcd_ignore_oc.patch

   1 From 1e311820ec3055e3f08e687de6564692a7cec675 Mon Sep 17 00:00:00 2001
   2 From: Florian Fainelli <florian@openwrt.org>
   3 Date: Mon, 28 Jan 2013 20:06:29 +0100
   4 Subject: [PATCH 11/12] USB: EHCI: add ignore_oc flag to disable overcurrent
   5  checking
   6
   7 This patch adds an ignore_oc flag which can be set by EHCI controller
   8 not supporting or wanting to disable overcurrent checking. The EHCI
   9 platform data in include/linux/usb/ehci_pdriver.h is also augmented to
  10 take advantage of this new flag.
  11
  12 Signed-off-by: Florian Fainelli <florian@openwrt.org>
  13 ---
  14  drivers/usb/host/ehci-hcd.c      |    2 +-
  15  drivers/usb/host/ehci-hub.c      |    4 ++--
  16  drivers/usb/host/ehci-platform.c |    1 +
  17  drivers/usb/host/ehci.h          |    1 +
  18  include/linux/usb/ehci_pdriver.h |    1 +
  19  5 files changed, 6 insertions(+), 3 deletions(-)
  20
  21 --- a/drivers/usb/host/ehci-hcd.c
  22 +++ b/drivers/usb/host/ehci-hcd.c
  23 @@ -651,7 +651,7 @@ static int ehci_run (struct usb_hcd *hcd
  24                 "USB %x.%x started, EHCI %x.%02x%s\n",
  25                 ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
  26                 temp >> 8, temp & 0xff,
  27 -               ignore_oc ? ", overcurrent ignored" : "");
  28 +               (ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
  29
  30         ehci_writel(ehci, INTR_MASK,
  31                     &ehci->regs->intr_enable); /* Turn On Interrupts */
  32 --- a/drivers/usb/host/ehci-hub.c
  33 +++ b/drivers/usb/host/ehci-hub.c
  34 @@ -638,7 +638,7 @@ ehci_hub_status_data (struct usb_hcd *hc
  35          * always set, seem to clear PORT_OCC and PORT_CSC when writing to
  36          * PORT_POWER; that's surprising, but maybe within-spec.
  37          */
  38 -       if (!ignore_oc)
  39 +       if (!ignore_oc && !ehci->ignore_oc)
  40                 mask = PORT_CSC | PORT_PEC | PORT_OCC;
  41         else
  42                 mask = PORT_CSC | PORT_PEC;
  43 @@ -1008,7 +1008,7 @@ int ehci_hub_control(
  44                 if (temp & PORT_PEC)
  45                         status |= USB_PORT_STAT_C_ENABLE << 16;
  46
  47 -               if ((temp & PORT_OCC) && !ignore_oc){
  48 +               if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
  49                         status |= USB_PORT_STAT_C_OVERCURRENT << 16;
  50
  51                         /*
  52 --- a/drivers/usb/host/ehci-platform.c
  53 +++ b/drivers/usb/host/ehci-platform.c
  54 @@ -259,6 +259,8 @@ static int ehci_platform_probe(struct pl
  55                 hcd->has_tt = 1;
  56         if (pdata->reset_on_resume)
  57                 priv->reset_on_resume = true;
  58 +       if (pdata->ignore_oc)
  59 +               ehci->ignore_oc = 1;
  60
  61  #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
  62         if (ehci->big_endian_mmio) {
  63 --- a/drivers/usb/host/ehci.h
  64 +++ b/drivers/usb/host/ehci.h
  65 @@ -230,6 +230,7 @@ struct ehci_hcd {                   /* one per controlle
  66         unsigned                frame_index_bug:1; /* MosChip (AKA NetMos) */
  67         unsigned                need_oc_pp_cycle:1; /* MPC834X port power */
  68         unsigned                imx28_write_fix:1; /* For Freescale i.MX28 */
  69 +       unsigned                ignore_oc:1;
  70
  71         /* required for usb32 quirk */
  72         #define OHCI_CTRL_HCFS          (3 << 6)
  73 --- a/include/linux/usb/ehci_pdriver.h
  74 +++ b/include/linux/usb/ehci_pdriver.h
  75 @@ -49,6 +49,7 @@ struct usb_ehci_pdata {
  76         unsigned        no_io_watchdog:1;
  77         unsigned        reset_on_resume:1;
  78         unsigned        dma_mask_64:1;
  79 +       unsigned        ignore_oc:1;
  80
  81         /* Turn on all power and clocks */
  82         int (*power_on)(struct platform_device *pdev);