target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "D-Link DAP 2610";
  10         compatible = "dlink,dap-2610";
  11
  12         aliases {
  13                 led-boot = &led_red;
  14                 led-failsafe = &led_red;
  15                 led-running = &led_green;
  16                 led-upgrade = &led_red;
  17         };
  18
  19         soc {
  20                 edma@c080000 {
  21                         qcom,num_gmac = <1>;
  22                         status = "okay";
  23                 };
  24
  25                 tcsr@1949000 {
  26                         compatible = "qcom,tcsr";
  27                         reg = <0x1949000 0x100>;
  28                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  29                 };
  30
  31                 ess_tcsr@1953000 {
  32                         compatible = "qcom,tcsr";
  33                         reg = <0x1953000 0x1000>;
  34                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  35                 };
  36
  37                 tcsr@1957000 {
  38                         compatible = "qcom,tcsr";
  39                         reg = <0x1957000 0x100>;
  40                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  41                 };
  42
  43                 rng@22000 {
  44                         status = "okay";
  45                 };
  46
  47                 crypto@8e3a000 {
  48                         status = "okay";
  49                 };
  50
  51                 watchdog@b017000 {
  52                         status = "okay";
  53                 };
  54
  55                 ess-switch@c000000 {
  56                         status = "okay";
  57                         switch_lan_bmp = <0x20>;
  58                         switch_wan_bmp = <0x00>;
  59                 };
  60
  61                 ess-psgmii@98000 {
  62                         status = "okay";
  63                 };
  64         };
  65
  66         leds {
  67                 compatible = "gpio-leds";
  68
  69                 led_red: red {
  70                         label = "red:power";
  71                         gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
  72                 };
  73
  74                 led_green: green {
  75                         label = "green:power";
  76                         gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
  77                 };
  78         };
  79
  80         keys {
  81                 compatible = "gpio-keys";
  82
  83                 reset {
  84                         label = "reset";
  85                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
  86                         linux,code = <KEY_RESTART>;
  87                 };
  88         };
  89 };
  90
  91 &blsp1_spi1 {
  92         pinctrl-0 = <&spi_0_pins>;
  93         pinctrl-names = "default";
  94         status = "okay";
  95         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
  96
  97         flash@0 {
  98                 compatible = "jedec,spi-nor";
  99                 reg = <0>;
 100                 spi-max-frequency = <24000000>;
 101
 102                 partitions {
 103                         #address-cells = <1>;
 104                         #size-cells = <1>;
 105                         compatible = "fixed-partitions";
 106
 107                         partition@0 {
 108                                 label = "SBL1";
 109                                 reg = <0x0 0x40000>;
 110                                 read-only;
 111                         };
 112                         partition@40000 {
 113                                 label = "MIBIB";
 114                                 reg = <0x40000 0x20000>;
 115                                 read-only;
 116                         };
 117                         partition@60000 {
 118                                 label = "QSEE";
 119                                 reg = <0x60000 0x60000>;
 120                                 read-only;
 121                         };
 122                         partition@c0000 {
 123                                 label = "CDT";
 124                                 reg = <0xc0000 0x10000>;
 125                                 read-only;
 126                         };
 127                         partition@d0000 {
 128                                 label = "DDRPARAMS";
 129                                 reg = <0xd0000 0x10000>;
 130                                 read-only;
 131                         };
 132                         partition@e0000 {
 133                                 label = "APPSBLENV";
 134                                 reg = <0xe0000 0x10000>;
 135                                 read-only;
 136                         };
 137                         partition@f0000 {
 138                                 label = "APPSBL";
 139                                 reg = <0xf0000 0x80000>;
 140                                 read-only;
 141                         };
 142                         partition@170000 {
 143                                 label = "ART";
 144                                 reg = <0x170000 0x10000>;
 145                                 read-only;
 146                         };
 147                         partition@180000 {
 148                                 compatible = "wrg";
 149                                 label = "firmware";
 150                                 reg = <0x180000 0xdc0000>;
 151                         };
 152                         partition@fb0000 {
 153                                 label = "rgbd";
 154                                 reg = <0xfb0000 0x10000>;
 155                                 read-only;
 156                         };
 157                         partition@fc0000 {
 158                                 label = "bdcfg";
 159                                 reg = <0xfc0000 0x10000>;
 160                                 read-only;
 161                         };
 162                         partition@fd0000 {
 163                                 label = "langpack";
 164                                 reg = <0xfd0000 0x20000>;
 165                                 read-only;
 166                         };
 167                         partition@ff0000 {
 168                                 label = "certificate";
 169                                 reg = <0xff0000 0x10000>;
 170                                 read-only;
 171                         };
 172                         partition@f40000 {
 173                                 label = "captival";
 174                                 reg = <0xf40000 0x70000>;
 175                                 read-only;
 176                         };
 177                 };
 178         };
 179 };
 180
 181 &blsp_dma {
 182         status = "okay";
 183 };
 184
 185 &blsp1_uart1 {
 186         pinctrl-0 = <&serial_pins>;
 187         pinctrl-names = "default";
 188         status = "okay";
 189 };
 190
 191 &cryptobam {
 192         status = "okay";
 193 };
 194
 195 &gmac0 {
 196         qcom,phy_mdio_addr = <4>;
 197         qcom,poll_required = <1>;
 198         qcom,forced_speed = <1000>;
 199         qcom,forced_duplex = <1>;
 200         vlan_tag = <1 0x20>;
 201 };
 202
 203 &mdio {
 204         status = "okay";
 205 };
 206
 207 &tlmm {
 208         serial_pins: serial_pinmux {
 209                 mux {
 210                         pins = "gpio60", "gpio61";
 211                         function = "blsp_uart0";
 212                         bias-disable;
 213                 };
 214         };
 215
 216         spi_0_pins: spi_0_pinmux {
 217                 mux {
 218                         function = "blsp_spi0";
 219                         pins = "gpio55", "gpio56", "gpio57";
 220                         drive-strength = <12>;
 221                         bias-disable;
 222                 };
 223                 mux_cs {
 224                         function = "gpio";
 225                         pins = "gpio54";
 226                         drive-strength = <2>;
 227                         bias-disable;
 228                         output-high;
 229                 };
 230         };
 231 };
 232
 233 &wifi0 {
 234         status = "okay";
 235         qcom,ath10k-calibration-variant = "dlink,dap-2610";
 236 };
 237
 238 &wifi1 {
 239         status = "okay";
 240         qcom,ath10k-calibration-variant = "dlink,dap-2610";
 241 };