target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

   1 #!/bin/sh
   2
   3 ath10kcal_die() {
   4         echo "ath10cal: " "$*"
   5         exit 1
   6 }
   7
   8 ath10kcal_from_file() {
   9         local source=$1
  10         local offset=$2
  11         local count=$3
  12
  13         dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
  14                 ath10kcal_die "failed to extract calibration data from $source"
  15 }
  16
  17 ath10kcal_extract() {
  18         local part=$1
  19         local offset=$2
  20         local count=$3
  21         local mtd
  22
  23         mtd=$(find_mtd_chardev $part)
  24         [ -n "$mtd" ] || \
  25                 ath10kcal_die "no mtd device found for partition $part"
  26
  27         dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
  28                 ath10kcal_die "failed to extract calibration data from $mtd"
  29 }
  30
  31 ath10kcal_patch_mac() {
  32         local mac=$1
  33
  34         [ -z "$mac" ] && return
  35
  36         macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
  37 }
  38
  39 [ -e /lib/firmware/$FIRMWARE ] && exit 0
  40
  41 . /lib/functions.sh
  42 . /lib/functions/system.sh
  43
  44 board=$(board_name)
  45
  46
  47 case "$FIRMWARE" in
  48 "ath10k/pre-cal-ahb-a000000.wifi.bin")
  49         case "$board" in
  50         qcom,ap-dk01.1-c1)
  51                 ath10kcal_extract "ART" 4096 12064
  52                 ;;
  53         avm,fritzbox-4040)
  54                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
  55                 ;;
  56         esac
  57         ;;
  58 "ath10k/pre-cal-ahb-a800000.wifi.bin")
  59         case "$board" in
  60         qcom,ap-dk01.1-c1)
  61                 ath10kcal_extract "ART" 20480 12064
  62                 ;;
  63         avm,fritzbox-4040)
  64                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
  65                 ;;
  66         esac
  67         ;;
  68
  69 "ath10k/pre-cal-pci-0000:01:00.0.bin")
  70         case $board in
  71         tplink,c2600)
  72                 ath10kcal_extract "radio" 4096 12064
  73 #               ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
  74                 ;;
  75         netgear,d7800 |\
  76         netgear,r7500v2 |\
  77         netgear,r7800)
  78                 ath10kcal_extract "art" 4096 12064
  79                 ;;
  80         linksys,ea8500)
  81                 hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
  82                 ath10kcal_extract "art" 4096 12064
  83                 ;;
  84         zyxel,nbg6817)
  85                 ath10kcal_extract "0:ART" 4096 12064
  86                 ;;
  87         tplink,vr2600v)
  88                 ath10kcal_extract "ART" 4096 12064
  89                 ;;
  90         esac
  91         ;;
  92 "ath10k/pre-cal-pci-0001:01:00.0.bin")
  93         case $board in
  94         tplink,c2600)
  95                 ath10kcal_extract "radio" 20480 12064
  96 #               ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2)
  97                 ;;
  98         netgear,d7800 |\
  99         netgear,r7500v2 |\
 100         netgear,r7800)
 101                 ath10kcal_extract "art" 20480 12064
 102                 ;;
 103         linksys,ea8500)
 104                 hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 105                 ath10kcal_extract "art" 20480 12064
 106                 ;;
 107         zyxel,nbg6817)
 108                 ath10kcal_extract "0:ART" 20480 12064
 109                 ;;
 110         tplink,vr2600v)
 111                 ath10kcal_extract "ART" 20480 12064
 112                 ;;
 113         esac
 114         ;;
 115 *)
 116         exit 1
 117         ;;
 118 esac