target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts

   1 #include "qcom-ipq8064-v1.0.dtsi"
   2 #include <dt-bindings/input/input.h>
   3
   4 / {
   5         model = "TP-Link Archer C2600";
   6         compatible = "tplink,c2600", "qcom,ipq8064";
   7
   8         memory@0 {
   9                 reg = <0x42000000 0x1e000000>;
  10                 device_type = "memory";
  11         };
  12
  13         reserved-memory {
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16                 ranges;
  17                 rsvd@41200000 {
  18                         reg = <0x41200000 0x300000>;
  19                         no-map;
  20                 };
  21         };
  22
  23         aliases {
  24                 serial0 = &uart4;
  25                 mdio-gpio0 = &mdio0;
  26
  27                 led-boot = &power;
  28                 led-failsafe = &ledgnr;
  29                 led-running = &power;
  30                 led-upgrade = &ledgnr;
  31         };
  32
  33         chosen {
  34                 linux,stdout-path = "serial0:115200n8";
  35         };
  36
  37         soc {
  38                 pinmux@800000 {
  39                         i2c4_pins: i2c4_pinmux {
  40                                 pins = "gpio12", "gpio13";
  41                                 function = "gsbi4";
  42                                 bias-disable;
  43                         };
  44
  45                         spi_pins: spi_pins {
  46                                 mux {
  47                                         pins = "gpio18", "gpio19", "gpio21";
  48                                         function = "gsbi5";
  49                                         drive-strength = <10>;
  50                                         bias-none;
  51                                 };
  52                         };
  53
  54                         nand_pins: nand_pins {
  55                                 mux {
  56                                         pins = "gpio34", "gpio35", "gpio36",
  57                                                "gpio37", "gpio38", "gpio39",
  58                                                "gpio40", "gpio41", "gpio42",
  59                                                "gpio43", "gpio44", "gpio45",
  60                                                "gpio46", "gpio47";
  61                                         function = "nand";
  62                                         drive-strength = <10>;
  63                                         bias-disable;
  64                                 };
  65
  66                                 pullups {
  67                                         pins = "gpio39";
  68                                         bias-pull-up;
  69                                 };
  70
  71                                 hold {
  72                                         pins = "gpio40", "gpio41", "gpio42",
  73                                                "gpio43", "gpio44", "gpio45",
  74                                                "gpio46", "gpio47";
  75                                         bias-bus-hold;
  76                                 };
  77                         };
  78
  79                         mdio0_pins: mdio0_pins {
  80                                 mux {
  81                                         pins = "gpio0", "gpio1";
  82                                         function = "gpio";
  83                                         drive-strength = <8>;
  84                                         bias-disable;
  85                                 };
  86                         };
  87
  88                         rgmii2_pins: rgmii2_pins {
  89                                 mux {
  90                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
  91                                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
  92                                         function = "rgmii2";
  93                                         drive-strength = <8>;
  94                                         bias-disable;
  95                                 };
  96                         };
  97                 };
  98
  99                 gsbi@16300000 {
 100                         qcom,mode = <GSBI_PROT_I2C_UART>;
 101                         status = "ok";
 102                         serial@16340000 {
 103                                 status = "ok";
 104                         };
 105                         /*
 106                          * The i2c device on gsbi4 should not be enabled.
 107                          * On ipq806x designs gsbi4 i2c is meant for exclusive
 108                          * RPM usage. Turning this on in kernel manifests as
 109                          * i2c failure for the RPM.
 110                          */
 111                 };
 112
 113                 gsbi5: gsbi@1a200000 {
 114                         qcom,mode = <GSBI_PROT_SPI>;
 115                         status = "ok";
 116
 117                         spi4: spi@1a280000 {
 118                                 status = "ok";
 119                                 spi-max-frequency = <50000000>;
 120
 121                                 pinctrl-0 = <&spi_pins>;
 122                                 pinctrl-names = "default";
 123
 124                                 cs-gpios = <&qcom_pinmux 20 0>;
 125
 126                                 flash: m25p80@0 {
 127                                         compatible = "s25fl256s1";
 128                                         #address-cells = <1>;
 129                                         #size-cells = <1>;
 130                                         spi-max-frequency = <50000000>;
 131                                         reg = <0>;
 132
 133                                         SBL1@0 {
 134                                                 label = "SBL1";
 135                                                 reg = <0x0 0x20000>;
 136                                                 read-only;
 137                                         };
 138                                         MIBIB@20000 {
 139                                                 label = "MIBIB";
 140                                                 reg = <0x20000 0x20000>;
 141                                                 read-only;
 142                                         };
 143                                         SBL2@40000 {
 144                                                 label = "SBL2";
 145                                                 reg = <0x40000 0x20000>;
 146                                                 read-only;
 147                                         };
 148                                         SBL3@60000 {
 149                                                 label = "SBL3";
 150                                                 reg = <0x60000 0x30000>;
 151                                                 read-only;
 152                                         };
 153                                         DDRCONFIG@90000 {
 154                                                 label = "DDRCONFIG";
 155                                                 reg = <0x90000 0x10000>;
 156                                                 read-only;
 157                                         };
 158                                         SSD@a0000 {
 159                                                 label = "SSD";
 160                                                 reg = <0xa0000 0x10000>;
 161                                                 read-only;
 162                                         };
 163                                         TZ@b0000 {
 164                                                 label = "TZ";
 165                                                 reg = <0xb0000 0x30000>;
 166                                                 read-only;
 167                                         };
 168                                         RPM@e0000 {
 169                                                 label = "RPM";
 170                                                 reg = <0xe0000 0x20000>;
 171                                                 read-only;
 172                                         };
 173                                         fs-uboot@100000 {
 174                                                 label = "fs-uboot";
 175                                                 reg = <0x100000 0x70000>;
 176                                                 read-only;
 177                                         };
 178                                         uboot-env@170000 {
 179                                                 label = "uboot-env";
 180                                                 reg = <0x170000 0x40000>;
 181                                                 read-only;
 182                                         };
 183                                         radio@1b0000 {
 184                                                 label = "radio";
 185                                                 reg = <0x1b0000 0x40000>;
 186                                                 read-only;
 187                                         };
 188                                         os-image@1f0000 {
 189                                                 label = "os-image";
 190                                                 reg = <0x1f0000 0x200000>;
 191                                         };
 192                                         rootfs@3f0000 {
 193                                                 label = "rootfs";
 194                                                 reg = <0x3f0000 0x1b00000>;
 195                                         };
 196                                         defaultmac: default-mac@1ef0000 {
 197                                                 label = "default-mac";
 198                                                 reg = <0x1ef0000 0x00200>;
 199                                                 read-only;
 200                                         };
 201                                         pin@1ef0200 {
 202                                                 label = "pin";
 203                                                 reg = <0x1ef0200 0x00200>;
 204                                                 read-only;
 205                                         };
 206                                         product-info@1ef0400 {
 207                                                 label = "product-info";
 208                                                 reg = <0x1ef0400 0x0fc00>;
 209                                                 read-only;
 210                                         };
 211                                         partition-table@1f00000 {
 212                                                 label = "partition-table";
 213                                                 reg = <0x1f00000 0x10000>;
 214                                                 read-only;
 215                                         };
 216                                         soft-version@1f10000 {
 217                                                 label = "soft-version";
 218                                                 reg = <0x1f10000 0x10000>;
 219                                                 read-only;
 220                                         };
 221                                         support-list@1f20000 {
 222                                                 label = "support-list";
 223                                                 reg = <0x1f20000 0x10000>;
 224                                                 read-only;
 225                                         };
 226                                         profile@1f30000 {
 227                                                 label = "profile";
 228                                                 reg = <0x1f30000 0x10000>;
 229                                                 read-only;
 230                                         };
 231                                         default-config@1f40000 {
 232                                                 label = "default-config";
 233                                                 reg = <0x1f40000 0x10000>;
 234                                                 read-only;
 235                                         };
 236                                         user-config@1f50000 {
 237                                                 label = "user-config";
 238                                                 reg = <0x1f50000 0x40000>;
 239                                                 read-only;
 240                                         };
 241                                         qos-db@1f90000 {
 242                                                 label = "qos-db";
 243                                                 reg = <0x1f90000 0x40000>;
 244                                                 read-only;
 245                                         };
 246                                         usb-config@1fd0000 {
 247                                                 label = "usb-config";
 248                                                 reg = <0x1fd0000 0x10000>;
 249                                                 read-only;
 250                                         };
 251                                         log@1fe0000 {
 252                                                 label = "log";
 253                                                 reg = <0x1fe0000 0x20000>;
 254                                                 read-only;
 255                                         };
 256                                 };
 257                         };
 258                 };
 259
 260                 phy@100f8800 {          /* USB3 port 1 HS phy */
 261                         status = "ok";
 262                 };
 263
 264                 phy@100f8830 {          /* USB3 port 1 SS phy */
 265                         status = "ok";
 266                 };
 267
 268                 phy@110f8800 {          /* USB3 port 0 HS phy */
 269                         status = "ok";
 270                 };
 271
 272                 phy@110f8830 {          /* USB3 port 0 SS phy */
 273                         status = "ok";
 274                 };
 275
 276                 usb30@0 {
 277                         status = "ok";
 278                 };
 279
 280                 usb30@1 {
 281                         status = "ok";
 282                 };
 283
 284                 pcie0: pci@1b500000 {
 285                         status = "ok";
 286                         phy-tx0-term-offset = <7>;
 287                 };
 288
 289                 pcie1: pci@1b700000 {
 290                         status = "ok";
 291                         phy-tx0-term-offset = <7>;
 292                 };
 293
 294                 mdio0: mdio {
 295                         compatible = "virtual,mdio-gpio";
 296                         #address-cells = <1>;
 297                         #size-cells = <0>;
 298                         gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
 299                         pinctrl-0 = <&mdio0_pins>;
 300                         pinctrl-names = "default";
 301
 302                         phy0: ethernet-phy@0 {
 303                                 device_type = "ethernet-phy";
 304                                 reg = <0>;
 305                                 qca,ar8327-initvals = <
 306                                         0x00004 0x7600000   /* PAD0_MODE */
 307                                         0x00008 0x1000000   /* PAD5_MODE */
 308                                         0x0000c 0x80        /* PAD6_MODE */
 309                                         0x000e4 0x6a545     /* MAC_POWER_SEL */
 310                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 311                                         0x0007c 0x4e        /* PORT0_STATUS */
 312                                         0x00094 0x4e        /* PORT6_STATUS */
 313                                         >;
 314                         };
 315
 316                         phy4: ethernet-phy@4 {
 317                                 device_type = "ethernet-phy";
 318                                 reg = <4>;
 319                         };
 320                 };
 321
 322                 gmac1: ethernet@37200000 {
 323                         status = "ok";
 324                         phy-mode = "rgmii";
 325                         qcom,id = <1>;
 326
 327                         pinctrl-0 = <&rgmii2_pins>;
 328                         pinctrl-names = "default";
 329
 330                         mtd-mac-address = <&defaultmac 0x8>;
 331                         mtd-mac-address-increment = <1>;
 332
 333                         fixed-link {
 334                                 speed = <1000>;
 335                                 full-duplex;
 336                         };
 337                 };
 338
 339                 gmac2: ethernet@37400000 {
 340                         status = "ok";
 341                         phy-mode = "sgmii";
 342                         qcom,id = <2>;
 343
 344                         mtd-mac-address = <&defaultmac 0x8>;
 345
 346                         fixed-link {
 347                                 speed = <1000>;
 348                                 full-duplex;
 349                         };
 350                 };
 351         };
 352
 353         gpio-keys {
 354                 compatible = "gpio-keys";
 355
 356                 wifi {
 357                         label = "wifi";
 358                         gpios = <&qcom_pinmux 49 1>;
 359                         linux,code = <KEY_WLAN>;
 360                 };
 361
 362                 reset {
 363                         label = "reset";
 364                         gpios = <&qcom_pinmux 64 1>;
 365                         linux,code = <KEY_RESTART>;
 366                 };
 367
 368                 wps {
 369                         label = "wps";
 370                         gpios = <&qcom_pinmux 65 1>;
 371                         linux,code = <KEY_WPS_BUTTON>;
 372                 };
 373                 ledgeneral {
 374                         label = "ledgeneral";
 375                         gpios = <&qcom_pinmux 16 1>;
 376                         linux,code = <KEY_DOLLAR>;
 377                 };
 378         };
 379
 380         gpio-leds {
 381                 compatible = "gpio-leds";
 382
 383                 lan {
 384                         label = "c2600:blue:lan";
 385                         gpios = <&qcom_pinmux 6 0>;
 386                 };
 387                 usb4 {
 388                         label = "c2600:blue:usb_4";
 389                         gpios = <&qcom_pinmux 7 0>;
 390                 };
 391                 usb2 {
 392                         label = "c2600:blue:usb_2";
 393                         gpios = <&qcom_pinmux 8 0>;
 394                 };
 395                 wps {
 396                         label = "c2600:blue:wps";
 397                         gpios = <&qcom_pinmux 9 0>;
 398                 };
 399                 wan_blue {
 400                         label = "c2600:blue:wan";
 401                         gpios = <&qcom_pinmux 33 1>;
 402                 };
 403                 power: status {
 404                         label = "c2600:blue:status";
 405                         gpios = <&qcom_pinmux 53 0>;
 406                         default-state = "on";
 407                 };
 408                 ledgnr: ledgnr {
 409                         label = "c2600:blue:ledgnr";
 410                         gpios = <&qcom_pinmux 66 0>;
 411                 };
 412         };
 413 };
 414
 415 &adm_dma {
 416         status = "ok";
 417 };