target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-c2600.dts

   1 #include "qcom-ipq8064-v1.0.dtsi"
   2 #include <dt-bindings/input/input.h>
   3
   4 / {
   5         model = "TP-Link Archer C2600";
   6         compatible = "tplink,c2600", "qcom,ipq8064";
   7
   8         memory@0 {
   9                 reg = <0x42000000 0x1e000000>;
  10                 device_type = "memory";
  11         };
  12
  13         reserved-memory {
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16                 ranges;
  17                 rsvd@41200000 {
  18                         reg = <0x41200000 0x300000>;
  19                         no-map;
  20                 };
  21         };
  22
  23         aliases {
  24                 serial0 = &uart4;
  25                 mdio-gpio0 = &mdio0;
  26         };
  27
  28         chosen {
  29                 linux,stdout-path = "serial0:115200n8";
  30         };
  31
  32         soc {
  33                 pinmux@800000 {
  34                         i2c4_pins: i2c4_pinmux {
  35                                 pins = "gpio12", "gpio13";
  36                                 function = "gsbi4";
  37                                 bias-disable;
  38                         };
  39
  40                         spi_pins: spi_pins {
  41                                 mux {
  42                                         pins = "gpio18", "gpio19", "gpio21";
  43                                         function = "gsbi5";
  44                                         drive-strength = <10>;
  45                                         bias-none;
  46                                 };
  47                         };
  48
  49                         nand_pins: nand_pins {
  50                                 mux {
  51                                         pins = "gpio34", "gpio35", "gpio36",
  52                                                "gpio37", "gpio38", "gpio39",
  53                                                "gpio40", "gpio41", "gpio42",
  54                                                "gpio43", "gpio44", "gpio45",
  55                                                "gpio46", "gpio47";
  56                                         function = "nand";
  57                                         drive-strength = <10>;
  58                                         bias-disable;
  59                                 };
  60
  61                                 pullups {
  62                                         pins = "gpio39";
  63                                         bias-pull-up;
  64                                 };
  65
  66                                 hold {
  67                                         pins = "gpio40", "gpio41", "gpio42",
  68                                                "gpio43", "gpio44", "gpio45",
  69                                                "gpio46", "gpio47";
  70                                         bias-bus-hold;
  71                                 };
  72                         };
  73
  74                         mdio0_pins: mdio0_pins {
  75                                 mux {
  76                                         pins = "gpio0", "gpio1";
  77                                         function = "gpio";
  78                                         drive-strength = <8>;
  79                                         bias-disable;
  80                                 };
  81                         };
  82
  83                         rgmii2_pins: rgmii2_pins {
  84                                 mux {
  85                                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
  86                                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
  87                                         function = "rgmii2";
  88                                         drive-strength = <8>;
  89                                         bias-disable;
  90                                 };
  91                         };
  92                 };
  93
  94                 gsbi@16300000 {
  95                         qcom,mode = <GSBI_PROT_I2C_UART>;
  96                         status = "ok";
  97                         serial@16340000 {
  98                                 status = "ok";
  99                         };
 100                         /*
 101                          * The i2c device on gsbi4 should not be enabled.
 102                          * On ipq806x designs gsbi4 i2c is meant for exclusive
 103                          * RPM usage. Turning this on in kernel manifests as
 104                          * i2c failure for the RPM.
 105                          */
 106                 };
 107
 108                 gsbi5: gsbi@1a200000 {
 109                         qcom,mode = <GSBI_PROT_SPI>;
 110                         status = "ok";
 111
 112                         spi4: spi@1a280000 {
 113                                 status = "ok";
 114                                 spi-max-frequency = <50000000>;
 115
 116                                 pinctrl-0 = <&spi_pins>;
 117                                 pinctrl-names = "default";
 118
 119                                 cs-gpios = <&qcom_pinmux 20 0>;
 120
 121                                 flash: m25p80@0 {
 122                                         compatible = "s25fl256s1";
 123                                         #address-cells = <1>;
 124                                         #size-cells = <1>;
 125                                         spi-max-frequency = <50000000>;
 126                                         reg = <0>;
 127
 128                                         SBL1@0 {
 129                                                 label = "SBL1";
 130                                                 reg = <0x0 0x20000>;
 131                                                 read-only;
 132                                         };
 133                                         MIBIB@20000 {
 134                                                 label = "MIBIB";
 135                                                 reg = <0x20000 0x20000>;
 136                                                 read-only;
 137                                         };
 138                                         SBL2@40000 {
 139                                                 label = "SBL2";
 140                                                 reg = <0x40000 0x20000>;
 141                                                 read-only;
 142                                         };
 143                                         SBL3@60000 {
 144                                                 label = "SBL3";
 145                                                 reg = <0x60000 0x30000>;
 146                                                 read-only;
 147                                         };
 148                                         DDRCONFIG@90000 {
 149                                                 label = "DDRCONFIG";
 150                                                 reg = <0x90000 0x10000>;
 151                                                 read-only;
 152                                         };
 153                                         SSD@a0000 {
 154                                                 label = "SSD";
 155                                                 reg = <0xa0000 0x10000>;
 156                                                 read-only;
 157                                         };
 158                                         TZ@b0000 {
 159                                                 label = "TZ";
 160                                                 reg = <0xb0000 0x30000>;
 161                                                 read-only;
 162                                         };
 163                                         RPM@e0000 {
 164                                                 label = "RPM";
 165                                                 reg = <0xe0000 0x20000>;
 166                                                 read-only;
 167                                         };
 168                                         fs-uboot@100000 {
 169                                                 label = "fs-uboot";
 170                                                 reg = <0x100000 0x70000>;
 171                                                 read-only;
 172                                         };
 173                                         uboot-env@170000 {
 174                                                 label = "uboot-env";
 175                                                 reg = <0x170000 0x40000>;
 176                                                 read-only;
 177                                         };
 178                                         radio@1b0000 {
 179                                                 label = "radio";
 180                                                 reg = <0x1b0000 0x40000>;
 181                                                 read-only;
 182                                         };
 183                                         os-image@1f0000 {
 184                                                 label = "os-image";
 185                                                 reg = <0x1f0000 0x200000>;
 186                                         };
 187                                         rootfs@3f0000 {
 188                                                 label = "rootfs";
 189                                                 reg = <0x3f0000 0x1b00000>;
 190                                         };
 191                                         defaultmac: default-mac@1ef0000 {
 192                                                 label = "default-mac";
 193                                                 reg = <0x1ef0000 0x00200>;
 194                                                 read-only;
 195                                         };
 196                                         pin@1ef0200 {
 197                                                 label = "pin";
 198                                                 reg = <0x1ef0200 0x00200>;
 199                                                 read-only;
 200                                         };
 201                                         product-info@1ef0400 {
 202                                                 label = "product-info";
 203                                                 reg = <0x1ef0400 0x0fc00>;
 204                                                 read-only;
 205                                         };
 206                                         partition-table@1f00000 {
 207                                                 label = "partition-table";
 208                                                 reg = <0x1f00000 0x10000>;
 209                                                 read-only;
 210                                         };
 211                                         soft-version@1f10000 {
 212                                                 label = "soft-version";
 213                                                 reg = <0x1f10000 0x10000>;
 214                                                 read-only;
 215                                         };
 216                                         support-list@1f20000 {
 217                                                 label = "support-list";
 218                                                 reg = <0x1f20000 0x10000>;
 219                                                 read-only;
 220                                         };
 221                                         profile@1f30000 {
 222                                                 label = "profile";
 223                                                 reg = <0x1f30000 0x10000>;
 224                                                 read-only;
 225                                         };
 226                                         default-config@1f40000 {
 227                                                 label = "default-config";
 228                                                 reg = <0x1f40000 0x10000>;
 229                                                 read-only;
 230                                         };
 231                                         user-config@1f50000 {
 232                                                 label = "user-config";
 233                                                 reg = <0x1f50000 0x40000>;
 234                                                 read-only;
 235                                         };
 236                                         qos-db@1f90000 {
 237                                                 label = "qos-db";
 238                                                 reg = <0x1f90000 0x40000>;
 239                                                 read-only;
 240                                         };
 241                                         usb-config@1fd0000 {
 242                                                 label = "usb-config";
 243                                                 reg = <0x1fd0000 0x10000>;
 244                                                 read-only;
 245                                         };
 246                                         log@1fe0000 {
 247                                                 label = "log";
 248                                                 reg = <0x1fe0000 0x20000>;
 249                                                 read-only;
 250                                         };
 251                                 };
 252                         };
 253                 };
 254
 255                 phy@100f8800 {          /* USB3 port 1 HS phy */
 256                         status = "ok";
 257                 };
 258
 259                 phy@100f8830 {          /* USB3 port 1 SS phy */
 260                         status = "ok";
 261                 };
 262
 263                 phy@110f8800 {          /* USB3 port 0 HS phy */
 264                         status = "ok";
 265                 };
 266
 267                 phy@110f8830 {          /* USB3 port 0 SS phy */
 268                         status = "ok";
 269                 };
 270
 271                 usb30@0 {
 272                         status = "ok";
 273                 };
 274
 275                 usb30@1 {
 276                         status = "ok";
 277                 };
 278
 279                 pcie0: pci@1b500000 {
 280                         status = "ok";
 281                         phy-tx0-term-offset = <7>;
 282                 };
 283
 284                 pcie1: pci@1b700000 {
 285                         status = "ok";
 286                         phy-tx0-term-offset = <7>;
 287                 };
 288
 289                 mdio0: mdio {
 290                         compatible = "virtual,mdio-gpio";
 291                         #address-cells = <1>;
 292                         #size-cells = <0>;
 293                         gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
 294                         pinctrl-0 = <&mdio0_pins>;
 295                         pinctrl-names = "default";
 296
 297                         phy0: ethernet-phy@0 {
 298                                 device_type = "ethernet-phy";
 299                                 reg = <0>;
 300                                 qca,ar8327-initvals = <
 301                                         0x00004 0x7600000   /* PAD0_MODE */
 302                                         0x00008 0x1000000   /* PAD5_MODE */
 303                                         0x0000c 0x80        /* PAD6_MODE */
 304                                         0x000e4 0x6a545     /* MAC_POWER_SEL */
 305                                         0x000e0 0xc74164de  /* SGMII_CTRL */
 306                                         0x0007c 0x4e        /* PORT0_STATUS */
 307                                         0x00094 0x4e        /* PORT6_STATUS */
 308                                         >;
 309                         };
 310
 311                         phy4: ethernet-phy@4 {
 312                                 device_type = "ethernet-phy";
 313                                 reg = <4>;
 314                         };
 315                 };
 316
 317                 gmac1: ethernet@37200000 {
 318                         status = "ok";
 319                         phy-mode = "rgmii";
 320                         qcom,id = <1>;
 321
 322                         pinctrl-0 = <&rgmii2_pins>;
 323                         pinctrl-names = "default";
 324
 325                         mtd-mac-address = <&defaultmac 0x8>;
 326                         mtd-mac-address-increment = <1>;
 327
 328                         fixed-link {
 329                                 speed = <1000>;
 330                                 full-duplex;
 331                         };
 332                 };
 333
 334                 gmac2: ethernet@37400000 {
 335                         status = "ok";
 336                         phy-mode = "sgmii";
 337                         qcom,id = <2>;
 338
 339                         mtd-mac-address = <&defaultmac 0x8>;
 340
 341                         fixed-link {
 342                                 speed = <1000>;
 343                                 full-duplex;
 344                         };
 345                 };
 346         };
 347
 348         gpio-keys {
 349                 compatible = "gpio-keys";
 350
 351                 wifi {
 352                         label = "wifi";
 353                         gpios = <&qcom_pinmux 49 1>;
 354                         linux,code = <KEY_WLAN>;
 355                 };
 356
 357                 reset {
 358                         label = "reset";
 359                         gpios = <&qcom_pinmux 64 1>;
 360                         linux,code = <KEY_RESTART>;
 361                 };
 362
 363                 wps {
 364                         label = "wps";
 365                         gpios = <&qcom_pinmux 65 1>;
 366                         linux,code = <KEY_WPS_BUTTON>;
 367                 };
 368                 ledgeneral {
 369                         label = "ledgeneral";
 370                         gpios = <&qcom_pinmux 16 1>;
 371                         linux,code = <KEY_DOLLAR>;
 372                 };
 373         };
 374
 375         gpio-leds {
 376                 compatible = "gpio-leds";
 377
 378                 lan {
 379                         label = "lan:blue";
 380                         gpios = <&qcom_pinmux 6 0>;
 381                 };
 382                 usb4 {
 383                         label = "usb_4:blue";
 384                         gpios = <&qcom_pinmux 7 0>;
 385                 };
 386                 usb2 {
 387                         label = "usb_2:blue";
 388                         gpios = <&qcom_pinmux 8 0>;
 389                 };
 390                 wps {
 391                         label = "wps:blue";
 392                         gpios = <&qcom_pinmux 9 0>;
 393                 };
 394                 wan_blue {
 395                         label = "wan:blue";
 396                         gpios = <&qcom_pinmux 33 1>;
 397                 };
 398                 status {
 399                         label = "status:blue";
 400                         gpios = <&qcom_pinmux 53 0>;
 401                         default-state = "on";
 402                 };
 403                 ledgnr {
 404                         label = "ledgnr:blue";
 405                         gpios = <&qcom_pinmux 66 0>;
 406                 };
 407         };
 408 };
 409
 410 &adm_dma {
 411         status = "ok";
 412 };